2 * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
4 * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
12 * provide warranty for any of this software. This material is
13 * provided "AS-IS" and at no charge.
15 * The TCO watchdog is implemented in the following I/O controller hubs:
16 * (See the intel documentation on http://developer.intel.com.)
17 * 82801AA (ICH) : document number 290655-003, 290677-014,
18 * 82801AB (ICHO) : document number 290655-003, 290677-014,
19 * 82801BA (ICH2) : document number 290687-002, 298242-027,
20 * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
21 * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
22 * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
23 * 82801DB (ICH4) : document number 290744-001, 290745-020,
24 * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
25 * 82801E (C-ICH) : document number 273599-001, 273645-002,
26 * 82801EB (ICH5) : document number 252516-001, 252517-003,
27 * 82801ER (ICH5R) : document number 252516-001, 252517-003,
28 * 82801FB (ICH6) : document number 301473-002, 301474-007,
29 * 82801FR (ICH6R) : document number 301473-002, 301474-007,
30 * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
31 * 82801FW (ICH6W) : document number 301473-001, 301474-007,
32 * 82801FRW (ICH6RW) : document number 301473-001, 301474-007,
33 * 82801GB (ICH7) : document number 307013-002, 307014-009,
34 * 82801GR (ICH7R) : document number 307013-002, 307014-009,
35 * 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
36 * 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
37 * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
38 * 82801HB (ICH8) : document number 313056-003, 313057-009,
39 * 82801HR (ICH8R) : document number 313056-003, 313057-009,
40 * 82801HBM (ICH8M) : document number 313056-003, 313057-009,
41 * 82801HH (ICH8DH) : document number 313056-003, 313057-009,
42 * 82801HO (ICH8DO) : document number 313056-003, 313057-009,
43 * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
44 * 82801IB (ICH9) : document number 316972-001, 316973-001,
45 * 82801IR (ICH9R) : document number 316972-001, 316973-001,
46 * 82801IH (ICH9DH) : document number 316972-001, 316973-001,
47 * 6300ESB (6300ESB) : document number 300641-003, 300884-010,
48 * 631xESB (631xESB) : document number 313082-001, 313075-005,
49 * 632xESB (632xESB) : document number 313082-001, 313075-005
53 * Includes, defines, variables, module parameters, ...
56 /* Module and version information */
57 #define DRV_NAME "iTCO_wdt"
58 #define DRV_VERSION "1.02"
59 #define DRV_RELDATE "26-Jul-2007"
60 #define PFX DRV_NAME ": "
63 #include <linux/module.h> /* For module specific items */
64 #include <linux/moduleparam.h> /* For new moduleparam's */
65 #include <linux/types.h> /* For standard types (like size_t) */
66 #include <linux/errno.h> /* For the -ENODEV/... values */
67 #include <linux/kernel.h> /* For printk/panic/... */
68 #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
69 #include <linux/watchdog.h> /* For the watchdog specific items */
70 #include <linux/init.h> /* For __init/__exit/... */
71 #include <linux/fs.h> /* For file operations */
72 #include <linux/platform_device.h> /* For platform_driver framework */
73 #include <linux/pci.h> /* For pci functions */
74 #include <linux/ioport.h> /* For io-port access */
75 #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
77 #include <asm/uaccess.h> /* For copy_to_user/put_user/... */
78 #include <asm/io.h> /* For inb/outb/... */
80 /* TCO related info */
82 TCO_ICH
= 0, /* ICH */
85 TCO_ICH2M
, /* ICH2-M */
86 TCO_ICH3
, /* ICH3-S */
87 TCO_ICH3M
, /* ICH3-M */
89 TCO_ICH4M
, /* ICH4-M */
91 TCO_ICH5
, /* ICH5 & ICH5R */
92 TCO_6300ESB
, /* 6300ESB */
93 TCO_ICH6
, /* ICH6 & ICH6R */
94 TCO_ICH6M
, /* ICH6-M */
95 TCO_ICH6W
, /* ICH6W & ICH6RW */
96 TCO_ICH7
, /* ICH7 & ICH7R */
97 TCO_ICH7M
, /* ICH7-M */
98 TCO_ICH7MDH
, /* ICH7-M DH */
99 TCO_ICH8
, /* ICH8 & ICH8R */
100 TCO_ICH8ME
, /* ICH8M-E */
101 TCO_ICH8DH
, /* ICH8DH */
102 TCO_ICH8DO
, /* ICH8DO */
103 TCO_ICH8M
, /* ICH8M */
105 TCO_ICH9R
, /* ICH9R */
106 TCO_ICH9DH
, /* ICH9DH */
107 TCO_631XESB
, /* 631xESB/632xESB */
112 unsigned int iTCO_version
;
113 } iTCO_chipset_info
[] __devinitdata
= {
123 {"ICH5 or ICH5R", 1},
125 {"ICH6 or ICH6R", 2},
127 {"ICH6W or ICH6RW", 2},
128 {"ICH7 or ICH7R", 2},
131 {"ICH8 or ICH8R", 2},
139 {"631xESB/632xESB", 2},
143 #define ITCO_PCI_DEVICE(dev, data) \
144 .vendor = PCI_VENDOR_ID_INTEL, \
146 .subvendor = PCI_ANY_ID, \
147 .subdevice = PCI_ANY_ID, \
153 * This data only exists for exporting the supported PCI ids
154 * via MODULE_DEVICE_TABLE. We do not actually register a
155 * pci_driver, because the I/O Controller Hub has also other
156 * functions that probably will be registered by other drivers.
158 static struct pci_device_id iTCO_wdt_pci_tbl
[] = {
159 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0
, TCO_ICH
)},
160 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0
, TCO_ICH0
)},
161 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0
, TCO_ICH2
)},
162 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10
, TCO_ICH2M
)},
163 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0
, TCO_ICH3
)},
164 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12
, TCO_ICH3M
)},
165 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0
, TCO_ICH4
)},
166 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12
, TCO_ICH4M
)},
167 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0
, TCO_CICH
)},
168 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0
, TCO_ICH5
)},
169 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1
, TCO_6300ESB
)},
170 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0
, TCO_ICH6
)},
171 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1
, TCO_ICH6M
)},
172 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2
, TCO_ICH6W
)},
173 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0
, TCO_ICH7
)},
174 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1
, TCO_ICH7M
)},
175 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31
, TCO_ICH7MDH
)},
176 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0
, TCO_ICH8
)},
177 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1
, TCO_ICH8ME
)},
178 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2
, TCO_ICH8DH
)},
179 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3
, TCO_ICH8DO
)},
180 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4
, TCO_ICH8M
)},
181 { ITCO_PCI_DEVICE(0x2918, TCO_ICH9
)},
182 { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R
)},
183 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2
, TCO_ICH9DH
)},
184 { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0
, TCO_631XESB
)},
185 { ITCO_PCI_DEVICE(0x2671, TCO_631XESB
)},
186 { ITCO_PCI_DEVICE(0x2672, TCO_631XESB
)},
187 { ITCO_PCI_DEVICE(0x2673, TCO_631XESB
)},
188 { ITCO_PCI_DEVICE(0x2674, TCO_631XESB
)},
189 { ITCO_PCI_DEVICE(0x2675, TCO_631XESB
)},
190 { ITCO_PCI_DEVICE(0x2676, TCO_631XESB
)},
191 { ITCO_PCI_DEVICE(0x2677, TCO_631XESB
)},
192 { ITCO_PCI_DEVICE(0x2678, TCO_631XESB
)},
193 { ITCO_PCI_DEVICE(0x2679, TCO_631XESB
)},
194 { ITCO_PCI_DEVICE(0x267a, TCO_631XESB
)},
195 { ITCO_PCI_DEVICE(0x267b, TCO_631XESB
)},
196 { ITCO_PCI_DEVICE(0x267c, TCO_631XESB
)},
197 { ITCO_PCI_DEVICE(0x267d, TCO_631XESB
)},
198 { ITCO_PCI_DEVICE(0x267e, TCO_631XESB
)},
199 { ITCO_PCI_DEVICE(0x267f, TCO_631XESB
)},
200 { 0, }, /* End of list */
202 MODULE_DEVICE_TABLE (pci
, iTCO_wdt_pci_tbl
);
204 /* Address definitions for the TCO */
205 #define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */
206 #define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */
208 #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
209 #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
210 #define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
211 #define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
212 #define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
213 #define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
214 #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
215 #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
216 #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
218 /* internal variables */
219 static unsigned long is_active
;
220 static char expect_release
;
221 static struct { /* this is private data for the iTCO_wdt device */
222 unsigned int iTCO_version
; /* TCO version/generation */
223 unsigned long ACPIBASE
; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
224 unsigned long __iomem
*gcs
; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */
225 spinlock_t io_lock
; /* the lock for io operations */
226 struct pci_dev
*pdev
; /* the PCI-device */
229 static struct platform_device
*iTCO_wdt_platform_device
; /* the watchdog platform device */
231 /* module parameters */
232 #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
233 static int heartbeat
= WATCHDOG_HEARTBEAT
; /* in seconds */
234 module_param(heartbeat
, int, 0);
235 MODULE_PARM_DESC(heartbeat
, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT
) ")");
237 static int nowayout
= WATCHDOG_NOWAYOUT
;
238 module_param(nowayout
, int, 0);
239 MODULE_PARM_DESC(nowayout
, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");
241 /* iTCO Vendor Specific Support hooks */
242 #ifdef CONFIG_ITCO_VENDOR_SUPPORT
243 extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
244 extern void iTCO_vendor_pre_stop(unsigned long);
245 extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
246 extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
247 extern int iTCO_vendor_check_noreboot_on(void);
249 #define iTCO_vendor_pre_start(acpibase, heartbeat) {}
250 #define iTCO_vendor_pre_stop(acpibase) {}
251 #define iTCO_vendor_pre_keepalive(acpibase,heartbeat) {}
252 #define iTCO_vendor_pre_set_heartbeat(heartbeat) {}
253 #define iTCO_vendor_check_noreboot_on() 1 /* 1=check noreboot; 0=don't check */
257 * Some TCO specific functions
260 static inline unsigned int seconds_to_ticks(int seconds
)
262 /* the internal timer is stored as ticks which decrement
263 * every 0.6 seconds */
264 return (seconds
* 10) / 6;
267 static void iTCO_wdt_set_NO_REBOOT_bit(void)
271 /* Set the NO_REBOOT bit: this disables reboots */
272 if (iTCO_wdt_private
.iTCO_version
== 2) {
273 val32
= readl(iTCO_wdt_private
.gcs
);
275 writel(val32
, iTCO_wdt_private
.gcs
);
276 } else if (iTCO_wdt_private
.iTCO_version
== 1) {
277 pci_read_config_dword(iTCO_wdt_private
.pdev
, 0xd4, &val32
);
279 pci_write_config_dword(iTCO_wdt_private
.pdev
, 0xd4, val32
);
283 static int iTCO_wdt_unset_NO_REBOOT_bit(void)
288 /* Unset the NO_REBOOT bit: this enables reboots */
289 if (iTCO_wdt_private
.iTCO_version
== 2) {
290 val32
= readl(iTCO_wdt_private
.gcs
);
292 writel(val32
, iTCO_wdt_private
.gcs
);
294 val32
= readl(iTCO_wdt_private
.gcs
);
295 if (val32
& 0x00000020)
297 } else if (iTCO_wdt_private
.iTCO_version
== 1) {
298 pci_read_config_dword(iTCO_wdt_private
.pdev
, 0xd4, &val32
);
300 pci_write_config_dword(iTCO_wdt_private
.pdev
, 0xd4, val32
);
302 pci_read_config_dword(iTCO_wdt_private
.pdev
, 0xd4, &val32
);
303 if (val32
& 0x00000002)
307 return ret
; /* returns: 0 = OK, -EIO = Error */
310 static int iTCO_wdt_start(void)
314 spin_lock(&iTCO_wdt_private
.io_lock
);
316 iTCO_vendor_pre_start(iTCO_wdt_private
.ACPIBASE
, heartbeat
);
318 /* disable chipset's NO_REBOOT bit */
319 if (iTCO_wdt_unset_NO_REBOOT_bit()) {
320 spin_unlock(&iTCO_wdt_private
.io_lock
);
321 printk(KERN_ERR PFX
"failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
325 /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
330 spin_unlock(&iTCO_wdt_private
.io_lock
);
337 static int iTCO_wdt_stop(void)
341 spin_lock(&iTCO_wdt_private
.io_lock
);
343 iTCO_vendor_pre_stop(iTCO_wdt_private
.ACPIBASE
);
345 /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
351 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
352 iTCO_wdt_set_NO_REBOOT_bit();
354 spin_unlock(&iTCO_wdt_private
.io_lock
);
356 if ((val
& 0x0800) == 0)
361 static int iTCO_wdt_keepalive(void)
363 spin_lock(&iTCO_wdt_private
.io_lock
);
365 iTCO_vendor_pre_keepalive(iTCO_wdt_private
.ACPIBASE
, heartbeat
);
367 /* Reload the timer by writing to the TCO Timer Counter register */
368 if (iTCO_wdt_private
.iTCO_version
== 2) {
370 } else if (iTCO_wdt_private
.iTCO_version
== 1) {
374 spin_unlock(&iTCO_wdt_private
.io_lock
);
378 static int iTCO_wdt_set_heartbeat(int t
)
384 tmrval
= seconds_to_ticks(t
);
385 /* from the specs: */
386 /* "Values of 0h-3h are ignored and should not be attempted" */
389 if (((iTCO_wdt_private
.iTCO_version
== 2) && (tmrval
> 0x3ff)) ||
390 ((iTCO_wdt_private
.iTCO_version
== 1) && (tmrval
> 0x03f)))
393 iTCO_vendor_pre_set_heartbeat(tmrval
);
395 /* Write new heartbeat to watchdog */
396 if (iTCO_wdt_private
.iTCO_version
== 2) {
397 spin_lock(&iTCO_wdt_private
.io_lock
);
398 val16
= inw(TCOv2_TMR
);
401 outw(val16
, TCOv2_TMR
);
402 val16
= inw(TCOv2_TMR
);
403 spin_unlock(&iTCO_wdt_private
.io_lock
);
405 if ((val16
& 0x3ff) != tmrval
)
407 } else if (iTCO_wdt_private
.iTCO_version
== 1) {
408 spin_lock(&iTCO_wdt_private
.io_lock
);
409 val8
= inb(TCOv1_TMR
);
411 val8
|= (tmrval
& 0xff);
412 outb(val8
, TCOv1_TMR
);
413 val8
= inb(TCOv1_TMR
);
414 spin_unlock(&iTCO_wdt_private
.io_lock
);
416 if ((val8
& 0x3f) != tmrval
)
424 static int iTCO_wdt_get_timeleft (int *time_left
)
429 /* read the TCO Timer */
430 if (iTCO_wdt_private
.iTCO_version
== 2) {
431 spin_lock(&iTCO_wdt_private
.io_lock
);
432 val16
= inw(TCO_RLD
);
434 spin_unlock(&iTCO_wdt_private
.io_lock
);
436 *time_left
= (val16
* 6) / 10;
437 } else if (iTCO_wdt_private
.iTCO_version
== 1) {
438 spin_lock(&iTCO_wdt_private
.io_lock
);
441 spin_unlock(&iTCO_wdt_private
.io_lock
);
443 *time_left
= (val8
* 6) / 10;
450 * /dev/watchdog handling
453 static int iTCO_wdt_open (struct inode
*inode
, struct file
*file
)
455 /* /dev/watchdog can only be opened once */
456 if (test_and_set_bit(0, &is_active
))
460 * Reload and activate timer
462 iTCO_wdt_keepalive();
464 return nonseekable_open(inode
, file
);
467 static int iTCO_wdt_release (struct inode
*inode
, struct file
*file
)
470 * Shut off the timer.
472 if (expect_release
== 42) {
475 printk(KERN_CRIT PFX
"Unexpected close, not stopping watchdog!\n");
476 iTCO_wdt_keepalive();
478 clear_bit(0, &is_active
);
483 static ssize_t
iTCO_wdt_write (struct file
*file
, const char __user
*data
,
484 size_t len
, loff_t
* ppos
)
486 /* See if we got the magic character 'V' and reload the timer */
491 /* note: just in case someone wrote the magic character
492 * five months ago... */
495 /* scan to see whether or not we got the magic character */
496 for (i
= 0; i
!= len
; i
++) {
498 if (get_user(c
, data
+i
))
505 /* someone wrote to us, we should reload the timer */
506 iTCO_wdt_keepalive();
511 static int iTCO_wdt_ioctl (struct inode
*inode
, struct file
*file
,
512 unsigned int cmd
, unsigned long arg
)
514 int new_options
, retval
= -EINVAL
;
516 void __user
*argp
= (void __user
*)arg
;
517 int __user
*p
= argp
;
518 static struct watchdog_info ident
= {
519 .options
= WDIOF_SETTIMEOUT
|
520 WDIOF_KEEPALIVEPING
|
522 .firmware_version
= 0,
523 .identity
= DRV_NAME
,
527 case WDIOC_GETSUPPORT
:
528 return copy_to_user(argp
, &ident
,
529 sizeof (ident
)) ? -EFAULT
: 0;
531 case WDIOC_GETSTATUS
:
532 case WDIOC_GETBOOTSTATUS
:
533 return put_user(0, p
);
535 case WDIOC_KEEPALIVE
:
536 iTCO_wdt_keepalive();
539 case WDIOC_SETOPTIONS
:
541 if (get_user(new_options
, p
))
544 if (new_options
& WDIOS_DISABLECARD
) {
549 if (new_options
& WDIOS_ENABLECARD
) {
550 iTCO_wdt_keepalive();
558 case WDIOC_SETTIMEOUT
:
560 if (get_user(new_heartbeat
, p
))
563 if (iTCO_wdt_set_heartbeat(new_heartbeat
))
566 iTCO_wdt_keepalive();
570 case WDIOC_GETTIMEOUT
:
571 return put_user(heartbeat
, p
);
573 case WDIOC_GETTIMELEFT
:
577 if (iTCO_wdt_get_timeleft(&time_left
))
580 return put_user(time_left
, p
);
592 static const struct file_operations iTCO_wdt_fops
= {
593 .owner
= THIS_MODULE
,
595 .write
= iTCO_wdt_write
,
596 .ioctl
= iTCO_wdt_ioctl
,
597 .open
= iTCO_wdt_open
,
598 .release
= iTCO_wdt_release
,
601 static struct miscdevice iTCO_wdt_miscdev
= {
602 .minor
= WATCHDOG_MINOR
,
604 .fops
= &iTCO_wdt_fops
,
608 * Init & exit routines
611 static int __devinit
iTCO_wdt_init(struct pci_dev
*pdev
, const struct pci_device_id
*ent
, struct platform_device
*dev
)
619 * Find the ACPI/PM base I/O address which is the base
620 * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
621 * ACPIBASE is bits [15:7] from 0x40-0x43
623 pci_read_config_dword(pdev
, 0x40, &base_address
);
624 base_address
&= 0x0000ff80;
625 if (base_address
== 0x00000000) {
626 /* Something's wrong here, ACPIBASE has to be set */
627 printk(KERN_ERR PFX
"failed to get TCOBASE address\n");
631 iTCO_wdt_private
.iTCO_version
= iTCO_chipset_info
[ent
->driver_data
].iTCO_version
;
632 iTCO_wdt_private
.ACPIBASE
= base_address
;
633 iTCO_wdt_private
.pdev
= pdev
;
635 /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */
636 /* To get access to it you have to read RCBA from PCI Config space 0xf0
637 and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */
638 if (iTCO_wdt_private
.iTCO_version
== 2) {
639 pci_read_config_dword(pdev
, 0xf0, &base_address
);
640 RCBA
= base_address
& 0xffffc000;
641 iTCO_wdt_private
.gcs
= ioremap((RCBA
+ 0x3410),4);
644 /* Check chipset's NO_REBOOT bit */
645 if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
646 printk(KERN_ERR PFX
"failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
647 ret
= -ENODEV
; /* Cannot reset NO_REBOOT bit */
651 /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
652 iTCO_wdt_set_NO_REBOOT_bit();
654 /* Set the TCO_EN bit in SMI_EN register */
655 if (!request_region(SMI_EN
, 4, "iTCO_wdt")) {
656 printk(KERN_ERR PFX
"I/O address 0x%04lx already in use\n",
662 val32
&= 0xffffdfff; /* Turn off SMI clearing watchdog */
664 release_region(SMI_EN
, 4);
666 /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */
667 if (!request_region (TCOBASE
, 0x20, "iTCO_wdt")) {
668 printk (KERN_ERR PFX
"I/O address 0x%04lx already in use\n",
674 printk(KERN_INFO PFX
"Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
675 iTCO_chipset_info
[ent
->driver_data
].name
,
676 iTCO_chipset_info
[ent
->driver_data
].iTCO_version
,
679 /* Clear out the (probably old) status */
683 /* Make sure the watchdog is not running */
686 /* Check that the heartbeat value is within it's range ; if not reset to the default */
687 if (iTCO_wdt_set_heartbeat(heartbeat
)) {
688 iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT
);
689 printk(KERN_INFO PFX
"heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n",
693 ret
= misc_register(&iTCO_wdt_miscdev
);
695 printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
696 WATCHDOG_MINOR
, ret
);
700 printk (KERN_INFO PFX
"initialized. heartbeat=%d sec (nowayout=%d)\n",
701 heartbeat
, nowayout
);
706 release_region (TCOBASE
, 0x20);
708 if (iTCO_wdt_private
.iTCO_version
== 2)
709 iounmap(iTCO_wdt_private
.gcs
);
710 pci_dev_put(iTCO_wdt_private
.pdev
);
711 iTCO_wdt_private
.ACPIBASE
= 0;
715 static void __devexit
iTCO_wdt_cleanup(void)
717 /* Stop the timer before we leave */
722 misc_deregister(&iTCO_wdt_miscdev
);
723 release_region(TCOBASE
, 0x20);
724 if (iTCO_wdt_private
.iTCO_version
== 2)
725 iounmap(iTCO_wdt_private
.gcs
);
726 pci_dev_put(iTCO_wdt_private
.pdev
);
727 iTCO_wdt_private
.ACPIBASE
= 0;
730 static int __devinit
iTCO_wdt_probe(struct platform_device
*dev
)
733 struct pci_dev
*pdev
= NULL
;
734 const struct pci_device_id
*ent
;
736 spin_lock_init(&iTCO_wdt_private
.io_lock
);
738 for_each_pci_dev(pdev
) {
739 ent
= pci_match_id(iTCO_wdt_pci_tbl
, pdev
);
741 if (!(iTCO_wdt_init(pdev
, ent
, dev
))) {
749 printk(KERN_INFO PFX
"No card detected\n");
756 static int __devexit
iTCO_wdt_remove(struct platform_device
*dev
)
758 if (iTCO_wdt_private
.ACPIBASE
)
764 static void iTCO_wdt_shutdown(struct platform_device
*dev
)
769 #define iTCO_wdt_suspend NULL
770 #define iTCO_wdt_resume NULL
772 static struct platform_driver iTCO_wdt_driver
= {
773 .probe
= iTCO_wdt_probe
,
774 .remove
= __devexit_p(iTCO_wdt_remove
),
775 .shutdown
= iTCO_wdt_shutdown
,
776 .suspend
= iTCO_wdt_suspend
,
777 .resume
= iTCO_wdt_resume
,
779 .owner
= THIS_MODULE
,
784 static int __init
iTCO_wdt_init_module(void)
788 printk(KERN_INFO PFX
"Intel TCO WatchDog Timer Driver v%s (%s)\n",
789 DRV_VERSION
, DRV_RELDATE
);
791 err
= platform_driver_register(&iTCO_wdt_driver
);
795 iTCO_wdt_platform_device
= platform_device_register_simple(DRV_NAME
, -1, NULL
, 0);
796 if (IS_ERR(iTCO_wdt_platform_device
)) {
797 err
= PTR_ERR(iTCO_wdt_platform_device
);
798 goto unreg_platform_driver
;
803 unreg_platform_driver
:
804 platform_driver_unregister(&iTCO_wdt_driver
);
808 static void __exit
iTCO_wdt_cleanup_module(void)
810 platform_device_unregister(iTCO_wdt_platform_device
);
811 platform_driver_unregister(&iTCO_wdt_driver
);
812 printk(KERN_INFO PFX
"Watchdog Module Unloaded.\n");
815 module_init(iTCO_wdt_init_module
);
816 module_exit(iTCO_wdt_cleanup_module
);
818 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
819 MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
820 MODULE_VERSION(DRV_VERSION
);
821 MODULE_LICENSE("GPL");
822 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR
);