?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[NET]: make seq_operations const
[linux-2.6/kvm.git] / drivers / ata / pata_amd.c
blob18381762908bf8b474918bc5c4f93c5fcca7026c
1 /*
2 * pata_amd.c - AMD PATA for new ATA layer
3 * (C) 2005-2006 Red Hat Inc
4 * Alan Cox <alan@redhat.com>
5 *
6 * Based on pata-sil680. Errata information is taken from data sheets
7 * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
8 * claimed by sata-nv.c.
9 *
10 * TODO:
11 * Variable system clock when/if it makes sense
12 * Power management on ports
13 *
14 *
15 * Documentation publically available.
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <scsi/scsi_host.h>
25 #include <linux/libata.h>
26
27 #define DRV_NAME "pata_amd"
28 #define DRV_VERSION "0.2.8"
29
30 /**
31 * timing_setup - shared timing computation and load
32 * @ap: ATA port being set up
33 * @adev: drive being configured
34 * @offset: port offset
35 * @speed: target speed
36 * @clock: clock multiplier (number of times 33MHz for this part)
37 *
38 * Perform the actual timing set up for Nvidia or AMD PATA devices.
39 * The actual devices vary so they all call into this helper function
40 * providing the clock multipler and offset (because AMD and Nvidia put
41 * the ports at different locations).
42 */
43
44 static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock)
45 {
46 static const unsigned char amd_cyc2udma[] = {
47 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7
48 };
49
50 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
51 struct ata_device *peer = ata_dev_pair(adev);
52 int dn = ap->port_no * 2 + adev->devno;
53 struct ata_timing at, apeer;
54 int T, UT;
55 const int amd_clock = 33333; /* KHz. */
56 u8 t;
57
58 T = 1000000000 / amd_clock;
59 UT = T / min_t(int, max_t(int, clock, 1), 2);
60
61 if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
62 dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
63 return;
64 }
65
66 if (peer) {
67 /* This may be over conservative */
68 if (peer->dma_mode) {
69 ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT);
70 ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
71 }
72 ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT);
73 ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
74 }
75
76 if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1;
77 if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15;
78
79 /*
80 * Now do the setup work
81 */
82
83 /* Configure the address set up timing */
84 pci_read_config_byte(pdev, offset + 0x0C, &t);
85 t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
86 pci_write_config_byte(pdev, offset + 0x0C , t);
87
88 /* Configure the 8bit I/O timing */
89 pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
90 ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
91
92 /* Drive timing */
93 pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
94 ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
95
96 switch (clock) {
97 case 1:
98 t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
99 break;
100
101 case 2:
102 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
103 break;
104
105 case 3:
106 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
107 break;
108
109 case 4:
110 t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
111 break;
112
113 default:
114 return;
115 }
116
117 /* UDMA timing */
118 pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
119 }
120
121 /**
122 * amd_probe_init - cable detection
123 * @ap: ATA port
124 *
125 * Perform cable detection. The BIOS stores this in PCI config
126 * space for us.
127 */
128
129 static int amd_pre_reset(struct ata_port *ap)
130 {
131 static const u32 bitmask[2] = {0x03, 0x0C};
132 static const struct pci_bits amd_enable_bits[] = {
133 { 0x40, 1, 0x02, 0x02 },
134 { 0x40, 1, 0x01, 0x01 }
135 };
136
137 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
138 u8 ata66;
139
140 if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
141 return -ENOENT;
142
143 pci_read_config_byte(pdev, 0x42, &ata66);
144 if (ata66 & bitmask[ap->port_no])
145 ap->cbl = ATA_CBL_PATA80;
146 else
147 ap->cbl = ATA_CBL_PATA40;
148 return ata_std_prereset(ap);
149
150 }
151
152 static void amd_error_handler(struct ata_port *ap)
153 {
154 return ata_bmdma_drive_eh(ap, amd_pre_reset,
155 ata_std_softreset, NULL,
156 ata_std_postreset);
157 }
158
159 static int amd_early_pre_reset(struct ata_port *ap)
160 {
161 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
162 static struct pci_bits amd_enable_bits[] = {
163 { 0x40, 1, 0x02, 0x02 },
164 { 0x40, 1, 0x01, 0x01 }
165 };
166
167 if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
168 return -ENOENT;
169
170 /* No host side cable detection */
171 ap->cbl = ATA_CBL_PATA80;
172 return ata_std_prereset(ap);
173
174 }
175
176 static void amd_early_error_handler(struct ata_port *ap)
177 {
178 ata_bmdma_drive_eh(ap, amd_early_pre_reset,
179 ata_std_softreset, NULL,
180 ata_std_postreset);
181 }
182
183 /**
184 * amd33_set_piomode - set initial PIO mode data
185 * @ap: ATA interface
186 * @adev: ATA device
187 *
188 * Program the AMD registers for PIO mode.
189 */
190
191 static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
192 {
193 timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
194 }
195
196 static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
197 {
198 timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
199 }
200
201 static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
202 {
203 timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
204 }
205
206 static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
207 {
208 timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
209 }
210
211 /**
212 * amd33_set_dmamode - set initial DMA mode data
213 * @ap: ATA interface
214 * @adev: ATA device
215 *
216 * Program the MWDMA/UDMA modes for the AMD and Nvidia
217 * chipset.
218 */
219
220 static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev)
221 {
222 timing_setup(ap, adev, 0x40, adev->dma_mode, 1);
223 }
224
225 static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev)
226 {
227 timing_setup(ap, adev, 0x40, adev->dma_mode, 2);
228 }
229
230 static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
231 {
232 timing_setup(ap, adev, 0x40, adev->dma_mode, 3);
233 }
234
235 static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
236 {
237 timing_setup(ap, adev, 0x40, adev->dma_mode, 4);
238 }
239
240
241 /**
242 * nv_probe_init - cable detection
243 * @ap: ATA port
244 *
245 * Perform cable detection. The BIOS stores this in PCI config
246 * space for us.
247 */
248
249 static int nv_pre_reset(struct ata_port *ap) {
250 static const u8 bitmask[2] = {0x03, 0x0C};
251 static const struct pci_bits nv_enable_bits[] = {
252 { 0x50, 1, 0x02, 0x02 },
253 { 0x50, 1, 0x01, 0x01 }
254 };
255
256 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
257 u8 ata66;
258 u16 udma;
259
260 if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
261 return -ENOENT;
262
263 pci_read_config_byte(pdev, 0x52, &ata66);
264 if (ata66 & bitmask[ap->port_no])
265 ap->cbl = ATA_CBL_PATA80;
266 else
267 ap->cbl = ATA_CBL_PATA40;
268
269 /* We now have to double check because the Nvidia boxes BIOS
270 doesn't always set the cable bits but does set mode bits */
271
272 pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
273 if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
274 ap->cbl = ATA_CBL_PATA80;
275 return ata_std_prereset(ap);
276 }
277
278 static void nv_error_handler(struct ata_port *ap)
279 {
280 ata_bmdma_drive_eh(ap, nv_pre_reset,
281 ata_std_softreset, NULL,
282 ata_std_postreset);
283 }
284 /**
285 * nv100_set_piomode - set initial PIO mode data
286 * @ap: ATA interface
287 * @adev: ATA device
288 *
289 * Program the AMD registers for PIO mode.
290 */
291
292 static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev)
293 {
294 timing_setup(ap, adev, 0x50, adev->pio_mode, 3);
295 }
296
297 static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev)
298 {
299 timing_setup(ap, adev, 0x50, adev->pio_mode, 4);
300 }
301
302 /**
303 * nv100_set_dmamode - set initial DMA mode data
304 * @ap: ATA interface
305 * @adev: ATA device
306 *
307 * Program the MWDMA/UDMA modes for the AMD and Nvidia
308 * chipset.
309 */
310
311 static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
312 {
313 timing_setup(ap, adev, 0x50, adev->dma_mode, 3);
314 }
315
316 static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
317 {
318 timing_setup(ap, adev, 0x50, adev->dma_mode, 4);
319 }
320
321 static struct scsi_host_template amd_sht = {
322 .module = THIS_MODULE,
323 .name = DRV_NAME,
324 .ioctl = ata_scsi_ioctl,
325 .queuecommand = ata_scsi_queuecmd,
326 .can_queue = ATA_DEF_QUEUE,
327 .this_id = ATA_SHT_THIS_ID,
328 .sg_tablesize = LIBATA_MAX_PRD,
329 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
330 .emulated = ATA_SHT_EMULATED,
331 .use_clustering = ATA_SHT_USE_CLUSTERING,
332 .proc_name = DRV_NAME,
333 .dma_boundary = ATA_DMA_BOUNDARY,
334 .slave_configure = ata_scsi_slave_config,
335 .slave_destroy = ata_scsi_slave_destroy,
336 .bios_param = ata_std_bios_param,
337 #ifdef CONFIG_PM
338 .resume = ata_scsi_device_resume,
339 .suspend = ata_scsi_device_suspend,
340 #endif
341 };
342
343 static struct ata_port_operations amd33_port_ops = {
344 .port_disable = ata_port_disable,
345 .set_piomode = amd33_set_piomode,
346 .set_dmamode = amd33_set_dmamode,
347 .mode_filter = ata_pci_default_filter,
348 .tf_load = ata_tf_load,
349 .tf_read = ata_tf_read,
350 .check_status = ata_check_status,
351 .exec_command = ata_exec_command,
352 .dev_select = ata_std_dev_select,
353
354 .freeze = ata_bmdma_freeze,
355 .thaw = ata_bmdma_thaw,
356 .error_handler = amd_early_error_handler,
357 .post_internal_cmd = ata_bmdma_post_internal_cmd,
358
359 .bmdma_setup = ata_bmdma_setup,
360 .bmdma_start = ata_bmdma_start,
361 .bmdma_stop = ata_bmdma_stop,
362 .bmdma_status = ata_bmdma_status,
363
364 .qc_prep = ata_qc_prep,
365 .qc_issue = ata_qc_issue_prot,
366
367 .data_xfer = ata_data_xfer,
368
369 .irq_handler = ata_interrupt,
370 .irq_clear = ata_bmdma_irq_clear,
371 .irq_on = ata_irq_on,
372 .irq_ack = ata_irq_ack,
373
374 .port_start = ata_port_start,
375 };
376
377 static struct ata_port_operations amd66_port_ops = {
378 .port_disable = ata_port_disable,
379 .set_piomode = amd66_set_piomode,
380 .set_dmamode = amd66_set_dmamode,
381 .mode_filter = ata_pci_default_filter,
382 .tf_load = ata_tf_load,
383 .tf_read = ata_tf_read,
384 .check_status = ata_check_status,
385 .exec_command = ata_exec_command,
386 .dev_select = ata_std_dev_select,
387
388 .freeze = ata_bmdma_freeze,
389 .thaw = ata_bmdma_thaw,
390 .error_handler = amd_early_error_handler,
391 .post_internal_cmd = ata_bmdma_post_internal_cmd,
392
393 .bmdma_setup = ata_bmdma_setup,
394 .bmdma_start = ata_bmdma_start,
395 .bmdma_stop = ata_bmdma_stop,
396 .bmdma_status = ata_bmdma_status,
397
398 .qc_prep = ata_qc_prep,
399 .qc_issue = ata_qc_issue_prot,
400
401 .data_xfer = ata_data_xfer,
402
403 .irq_handler = ata_interrupt,
404 .irq_clear = ata_bmdma_irq_clear,
405 .irq_on = ata_irq_on,
406 .irq_ack = ata_irq_ack,
407
408 .port_start = ata_port_start,
409 };
410
411 static struct ata_port_operations amd100_port_ops = {
412 .port_disable = ata_port_disable,
413 .set_piomode = amd100_set_piomode,
414 .set_dmamode = amd100_set_dmamode,
415 .mode_filter = ata_pci_default_filter,
416 .tf_load = ata_tf_load,
417 .tf_read = ata_tf_read,
418 .check_status = ata_check_status,
419 .exec_command = ata_exec_command,
420 .dev_select = ata_std_dev_select,
421
422 .freeze = ata_bmdma_freeze,
423 .thaw = ata_bmdma_thaw,
424 .error_handler = amd_error_handler,
425 .post_internal_cmd = ata_bmdma_post_internal_cmd,
426
427 .bmdma_setup = ata_bmdma_setup,
428 .bmdma_start = ata_bmdma_start,
429 .bmdma_stop = ata_bmdma_stop,
430 .bmdma_status = ata_bmdma_status,
431
432 .qc_prep = ata_qc_prep,
433 .qc_issue = ata_qc_issue_prot,
434
435 .data_xfer = ata_data_xfer,
436
437 .irq_handler = ata_interrupt,
438 .irq_clear = ata_bmdma_irq_clear,
439 .irq_on = ata_irq_on,
440 .irq_ack = ata_irq_ack,
441
442 .port_start = ata_port_start,
443 };
444
445 static struct ata_port_operations amd133_port_ops = {
446 .port_disable = ata_port_disable,
447 .set_piomode = amd133_set_piomode,
448 .set_dmamode = amd133_set_dmamode,
449 .mode_filter = ata_pci_default_filter,
450 .tf_load = ata_tf_load,
451 .tf_read = ata_tf_read,
452 .check_status = ata_check_status,
453 .exec_command = ata_exec_command,
454 .dev_select = ata_std_dev_select,
455
456 .freeze = ata_bmdma_freeze,
457 .thaw = ata_bmdma_thaw,
458 .error_handler = amd_error_handler,
459 .post_internal_cmd = ata_bmdma_post_internal_cmd,
460
461 .bmdma_setup = ata_bmdma_setup,
462 .bmdma_start = ata_bmdma_start,
463 .bmdma_stop = ata_bmdma_stop,
464 .bmdma_status = ata_bmdma_status,
465
466 .qc_prep = ata_qc_prep,
467 .qc_issue = ata_qc_issue_prot,
468
469 .data_xfer = ata_data_xfer,
470
471 .irq_handler = ata_interrupt,
472 .irq_clear = ata_bmdma_irq_clear,
473 .irq_on = ata_irq_on,
474 .irq_ack = ata_irq_ack,
475
476 .port_start = ata_port_start,
477 };
478
479 static struct ata_port_operations nv100_port_ops = {
480 .port_disable = ata_port_disable,
481 .set_piomode = nv100_set_piomode,
482 .set_dmamode = nv100_set_dmamode,
483 .mode_filter = ata_pci_default_filter,
484 .tf_load = ata_tf_load,
485 .tf_read = ata_tf_read,
486 .check_status = ata_check_status,
487 .exec_command = ata_exec_command,
488 .dev_select = ata_std_dev_select,
489
490 .freeze = ata_bmdma_freeze,
491 .thaw = ata_bmdma_thaw,
492 .error_handler = nv_error_handler,
493 .post_internal_cmd = ata_bmdma_post_internal_cmd,
494
495 .bmdma_setup = ata_bmdma_setup,
496 .bmdma_start = ata_bmdma_start,
497 .bmdma_stop = ata_bmdma_stop,
498 .bmdma_status = ata_bmdma_status,
499
500 .qc_prep = ata_qc_prep,
501 .qc_issue = ata_qc_issue_prot,
502
503 .data_xfer = ata_data_xfer,
504
505 .irq_handler = ata_interrupt,
506 .irq_clear = ata_bmdma_irq_clear,
507 .irq_on = ata_irq_on,
508 .irq_ack = ata_irq_ack,
509
510 .port_start = ata_port_start,
511 };
512
513 static struct ata_port_operations nv133_port_ops = {
514 .port_disable = ata_port_disable,
515 .set_piomode = nv133_set_piomode,
516 .set_dmamode = nv133_set_dmamode,
517 .mode_filter = ata_pci_default_filter,
518 .tf_load = ata_tf_load,
519 .tf_read = ata_tf_read,
520 .check_status = ata_check_status,
521 .exec_command = ata_exec_command,
522 .dev_select = ata_std_dev_select,
523
524 .freeze = ata_bmdma_freeze,
525 .thaw = ata_bmdma_thaw,
526 .error_handler = nv_error_handler,
527 .post_internal_cmd = ata_bmdma_post_internal_cmd,
528
529 .bmdma_setup = ata_bmdma_setup,
530 .bmdma_start = ata_bmdma_start,
531 .bmdma_stop = ata_bmdma_stop,
532 .bmdma_status = ata_bmdma_status,
533
534 .qc_prep = ata_qc_prep,
535 .qc_issue = ata_qc_issue_prot,
536
537 .data_xfer = ata_data_xfer,
538
539 .irq_handler = ata_interrupt,
540 .irq_clear = ata_bmdma_irq_clear,
541 .irq_on = ata_irq_on,
542 .irq_ack = ata_irq_ack,
543
544 .port_start = ata_port_start,
545 };
546
547 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
548 {
549 static struct ata_port_info info[10] = {
550 { /* 0: AMD 7401 */
551 .sht = &amd_sht,
552 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
553 .pio_mask = 0x1f,
554 .mwdma_mask = 0x07, /* No SWDMA */
555 .udma_mask = 0x07, /* UDMA 33 */
556 .port_ops = &amd33_port_ops
557 },
558 { /* 1: Early AMD7409 - no swdma */
559 .sht = &amd_sht,
560 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
561 .pio_mask = 0x1f,
562 .mwdma_mask = 0x07,
563 .udma_mask = 0x1f, /* UDMA 66 */
564 .port_ops = &amd66_port_ops
565 },
566 { /* 2: AMD 7409, no swdma errata */
567 .sht = &amd_sht,
568 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
569 .pio_mask = 0x1f,
570 .mwdma_mask = 0x07,
571 .udma_mask = 0x1f, /* UDMA 66 */
572 .port_ops = &amd66_port_ops
573 },
574 { /* 3: AMD 7411 */
575 .sht = &amd_sht,
576 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
577 .pio_mask = 0x1f,
578 .mwdma_mask = 0x07,
579 .udma_mask = 0x3f, /* UDMA 100 */
580 .port_ops = &amd100_port_ops
581 },
582 { /* 4: AMD 7441 */
583 .sht = &amd_sht,
584 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
585 .pio_mask = 0x1f,
586 .mwdma_mask = 0x07,
587 .udma_mask = 0x3f, /* UDMA 100 */
588 .port_ops = &amd100_port_ops
589 },
590 { /* 5: AMD 8111*/
591 .sht = &amd_sht,
592 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
593 .pio_mask = 0x1f,
594 .mwdma_mask = 0x07,
595 .udma_mask = 0x7f, /* UDMA 133, no swdma */
596 .port_ops = &amd133_port_ops
597 },
598 { /* 6: AMD 8111 UDMA 100 (Serenade) */
599 .sht = &amd_sht,
600 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
601 .pio_mask = 0x1f,
602 .mwdma_mask = 0x07,
603 .udma_mask = 0x3f, /* UDMA 100, no swdma */
604 .port_ops = &amd133_port_ops
605 },
606 { /* 7: Nvidia Nforce */
607 .sht = &amd_sht,
608 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
609 .pio_mask = 0x1f,
610 .mwdma_mask = 0x07,
611 .udma_mask = 0x3f, /* UDMA 100 */
612 .port_ops = &nv100_port_ops
613 },
614 { /* 8: Nvidia Nforce2 and later */
615 .sht = &amd_sht,
616 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
617 .pio_mask = 0x1f,
618 .mwdma_mask = 0x07,
619 .udma_mask = 0x7f, /* UDMA 133, no swdma */
620 .port_ops = &nv133_port_ops
621 },
622 { /* 9: AMD CS5536 (Geode companion) */
623 .sht = &amd_sht,
624 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
625 .pio_mask = 0x1f,
626 .mwdma_mask = 0x07,
627 .udma_mask = 0x3f, /* UDMA 100 */
628 .port_ops = &amd100_port_ops
629 }
630 };
631 static struct ata_port_info *port_info[2];
632 static int printed_version;
633 int type = id->driver_data;
634 u8 rev;
635 u8 fifo;
636
637 if (!printed_version++)
638 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
639
640 pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
641 pci_read_config_byte(pdev, 0x41, &fifo);
642
643 /* Check for AMD7409 without swdma errata and if found adjust type */
644 if (type == 1 && rev > 0x7)
645 type = 2;
646
647 /* Check for AMD7411 */
648 if (type == 3)
649 /* FIFO is broken */
650 pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
651 else
652 pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
653
654 /* Serenade ? */
655 if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
656 pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
657 type = 6; /* UDMA 100 only */
658
659 if (type < 3)
660 ata_pci_clear_simplex(pdev);
661
662 /* And fire it up */
663
664 port_info[0] = port_info[1] = &info[type];
665 return ata_pci_init_one(pdev, port_info, 2);
666 }
667
668 #ifdef CONFIG_PM
669 static int amd_reinit_one(struct pci_dev *pdev)
670 {
671 if (pdev->vendor == PCI_VENDOR_ID_AMD) {
672 u8 fifo;
673 pci_read_config_byte(pdev, 0x41, &fifo);
674 if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
675 /* FIFO is broken */
676 pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
677 else
678 pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
679 if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
680 pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
681 ata_pci_clear_simplex(pdev);
682 }
683 return ata_pci_device_resume(pdev);
684 }
685 #endif
686
687 static const struct pci_device_id amd[] = {
688 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
689 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
690 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 3 },
691 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 4 },
692 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 5 },
693 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 7 },
694 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 8 },
695 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 8 },
696 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 8 },
697 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 8 },
698 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 8 },
699 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 8 },
700 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 },
701 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 },
702 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 },
703 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 },
704 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 },
705 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 },
706
707 { },
708 };
709
710 static struct pci_driver amd_pci_driver = {
711 .name = DRV_NAME,
712 .id_table = amd,
713 .probe = amd_init_one,
714 .remove = ata_pci_remove_one,
715 #ifdef CONFIG_PM
716 .suspend = ata_pci_device_suspend,
717 .resume = amd_reinit_one,
718 #endif
719 };
720
721 static int __init amd_init(void)
722 {
723 return pci_register_driver(&amd_pci_driver);
724 }
725
726 static void __exit amd_exit(void)
727 {
728 pci_unregister_driver(&amd_pci_driver);
729 }
730
731 MODULE_AUTHOR("Alan Cox");
732 MODULE_DESCRIPTION("low-level driver for AMD PATA IDE");
733 MODULE_LICENSE("GPL");
734 MODULE_DEVICE_TABLE(pci, amd);
735 MODULE_VERSION(DRV_VERSION);
736
737 module_init(amd_init);
738 module_exit(amd_exit);
kernel-based virtual machine