drivers/ide/pci/scc_pata.c

   1 /*
   2  * Support for IDE interfaces on Celleb platform
   3  *
   4  * (C) Copyright 2006 TOSHIBA CORPORATION
   5  *
   6  * This code is based on drivers/ide/pci/siimage.c:
   7  * Copyright (C) 2001-2002      Andre Hedrick <andre@linux-ide.org>
   8  * Copyright (C) 2003           Red Hat <alan@redhat.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License along
  21  * with this program; if not, write to the Free Software Foundation, Inc.,
  22  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  23  */
  24
  25 #include <linux/types.h>
  26 #include <linux/module.h>
  27 #include <linux/pci.h>
  28 #include <linux/delay.h>
  29 #include <linux/hdreg.h>
  30 #include <linux/ide.h>
  31 #include <linux/init.h>
  32
  33 #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4
  34
  35 #define SCC_PATA_NAME           "scc IDE"
  36
  37 #define TDVHSEL_MASTER          0x00000001
  38 #define TDVHSEL_SLAVE           0x00000004
  39
  40 #define MODE_JCUSFEN            0x00000080
  41
  42 #define CCKCTRL_ATARESET        0x00040000
  43 #define CCKCTRL_BUFCNT          0x00020000
  44 #define CCKCTRL_CRST            0x00010000
  45 #define CCKCTRL_OCLKEN          0x00000100
  46 #define CCKCTRL_ATACLKOEN       0x00000002
  47 #define CCKCTRL_LCLKEN          0x00000001
  48
  49 #define QCHCD_IOS_SS            0x00000001
  50
  51 #define QCHSD_STPDIAG           0x00020000
  52
  53 #define INTMASK_MSK             0xD1000012
  54 #define INTSTS_SERROR           0x80000000
  55 #define INTSTS_PRERR            0x40000000
  56 #define INTSTS_RERR             0x10000000
  57 #define INTSTS_ICERR            0x01000000
  58 #define INTSTS_BMSINT           0x00000010
  59 #define INTSTS_BMHE             0x00000008
  60 #define INTSTS_IOIRQS           0x00000004
  61 #define INTSTS_INTRQ            0x00000002
  62 #define INTSTS_ACTEINT          0x00000001
  63
  64 #define ECMODE_VALUE 0x01
  65
  66 static struct scc_ports {
  67         unsigned long ctl, dma;
  68         unsigned char hwif_id;  /* for removing hwif from system */
  69 } scc_ports[MAX_HWIFS];
  70
  71 /* PIO transfer mode  table */
  72 /* JCHST */
  73 static unsigned long JCHSTtbl[2][7] = {
  74         {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */
  75         {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */
  76 };
  77
  78 /* JCHHT */
  79 static unsigned long JCHHTtbl[2][7] = {
  80         {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */
  81         {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */
  82 };
  83
  84 /* JCHCT */
  85 static unsigned long JCHCTtbl[2][7] = {
  86         {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */
  87         {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */
  88 };
  89
  90
  91 /* DMA transfer mode  table */
  92 /* JCHDCTM/JCHDCTS */
  93 static unsigned long JCHDCTxtbl[2][7] = {
  94         {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */
  95         {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */
  96 };
  97
  98 /* JCSTWTM/JCSTWTS  */
  99 static unsigned long JCSTWTxtbl[2][7] = {
 100         {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */
 101         {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
 102 };
 103
 104 /* JCTSS */
 105 static unsigned long JCTSStbl[2][7] = {
 106         {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */
 107         {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */
 108 };
 109
 110 /* JCENVT */
 111 static unsigned long JCENVTtbl[2][7] = {
 112         {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */
 113         {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
 114 };
 115
 116 /* JCACTSELS/JCACTSELM */
 117 static unsigned long JCACTSELtbl[2][7] = {
 118         {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */
 119         {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */
 120 };
 121
 122
 123 static u8 scc_ide_inb(unsigned long port)
 124 {
 125         u32 data = in_be32((void*)port);
 126         return (u8)data;
 127 }
 128
 129 static u16 scc_ide_inw(unsigned long port)
 130 {
 131         u32 data = in_be32((void*)port);
 132         return (u16)data;
 133 }
 134
 135 static void scc_ide_insw(unsigned long port, void *addr, u32 count)
 136 {
 137         u16 *ptr = (u16 *)addr;
 138         while (count--) {
 139                 *ptr++ = le16_to_cpu(in_be32((void*)port));
 140         }
 141 }
 142
 143 static void scc_ide_insl(unsigned long port, void *addr, u32 count)
 144 {
 145         u16 *ptr = (u16 *)addr;
 146         while (count--) {
 147                 *ptr++ = le16_to_cpu(in_be32((void*)port));
 148                 *ptr++ = le16_to_cpu(in_be32((void*)port));
 149         }
 150 }
 151
 152 static void scc_ide_outb(u8 addr, unsigned long port)
 153 {
 154         out_be32((void*)port, addr);
 155 }
 156
 157 static void scc_ide_outw(u16 addr, unsigned long port)
 158 {
 159         out_be32((void*)port, addr);
 160 }
 161
 162 static void
 163 scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
 164 {
 165         ide_hwif_t *hwif = HWIF(drive);
 166
 167         out_be32((void*)port, addr);
 168         __asm__ __volatile__("eieio":::"memory");
 169         in_be32((void*)(hwif->dma_base + 0x01c));
 170         __asm__ __volatile__("eieio":::"memory");
 171 }
 172
 173 static void
 174 scc_ide_outsw(unsigned long port, void *addr, u32 count)
 175 {
 176         u16 *ptr = (u16 *)addr;
 177         while (count--) {
 178                 out_be32((void*)port, cpu_to_le16(*ptr++));
 179         }
 180 }
 181
 182 static void
 183 scc_ide_outsl(unsigned long port, void *addr, u32 count)
 184 {
 185         u16 *ptr = (u16 *)addr;
 186         while (count--) {
 187                 out_be32((void*)port, cpu_to_le16(*ptr++));
 188                 out_be32((void*)port, cpu_to_le16(*ptr++));
 189         }
 190 }
 191
 192 /**
 193  *      scc_ratemask    -       Compute available modes
 194  *      @drive: IDE drive
 195  *
 196  *      Compute the available speeds for the devices on the interface.
 197  *      Enforce UDMA33 as a limit if there is no 80pin cable present.
 198  */
 199
 200 static u8 scc_ratemask(ide_drive_t *drive)
 201 {
 202         u8 mode = 4;
 203
 204         if (!eighty_ninty_three(drive))
 205                 mode = min(mode, (u8)1);
 206         return mode;
 207 }
 208
 209 /**
 210  *      scc_tuneproc    -       tune a drive PIO mode
 211  *      @drive: drive to tune
 212  *      @mode_wanted: the target operating mode
 213  *
 214  *      Load the timing settings for this device mode into the
 215  *      controller.
 216  */
 217
 218 static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
 219 {
 220         ide_hwif_t *hwif = HWIF(drive);
 221         struct scc_ports *ports = ide_get_hwifdata(hwif);
 222         unsigned long ctl_base = ports->ctl;
 223         unsigned long cckctrl_port = ctl_base + 0xff0;
 224         unsigned long piosht_port = ctl_base + 0x000;
 225         unsigned long pioct_port = ctl_base + 0x004;
 226         unsigned long reg;
 227         unsigned char speed = XFER_PIO_0;
 228         int offset;
 229
 230         mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
 231         switch (mode_wanted) {
 232         case 4:
 233                 speed = XFER_PIO_4;
 234                 break;
 235         case 3:
 236                 speed = XFER_PIO_3;
 237                 break;
 238         case 2:
 239                 speed = XFER_PIO_2;
 240                 break;
 241         case 1:
 242                 speed = XFER_PIO_1;
 243                 break;
 244         case 0:
 245         default:
 246                 speed = XFER_PIO_0;
 247                 break;
 248         }
 249
 250         reg = in_be32((void __iomem *)cckctrl_port);
 251         if (reg & CCKCTRL_ATACLKOEN) {
 252                 offset = 1; /* 133MHz */
 253         } else {
 254                 offset = 0; /* 100MHz */
 255         }
 256         reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
 257         out_be32((void __iomem *)piosht_port, reg);
 258         reg = JCHCTtbl[offset][mode_wanted];
 259         out_be32((void __iomem *)pioct_port, reg);
 260
 261         ide_config_drive_speed(drive, speed);
 262 }
 263
 264 /**
 265  *      scc_tune_chipset        -       tune a drive DMA mode
 266  *      @drive: Drive to set up
 267  *      @xferspeed: speed we want to achieve
 268  *
 269  *      Load the timing settings for this device mode into the
 270  *      controller.
 271  */
 272
 273 static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
 274 {
 275         ide_hwif_t *hwif = HWIF(drive);
 276         u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
 277         struct scc_ports *ports = ide_get_hwifdata(hwif);
 278         unsigned long ctl_base = ports->ctl;
 279         unsigned long cckctrl_port = ctl_base + 0xff0;
 280         unsigned long mdmact_port = ctl_base + 0x008;
 281         unsigned long mcrcst_port = ctl_base + 0x00c;
 282         unsigned long sdmact_port = ctl_base + 0x010;
 283         unsigned long scrcst_port = ctl_base + 0x014;
 284         unsigned long udenvt_port = ctl_base + 0x018;
 285         unsigned long tdvhsel_port   = ctl_base + 0x020;
 286         int is_slave = (&hwif->drives[1] == drive);
 287         int offset, idx;
 288         unsigned long reg;
 289         unsigned long jcactsel;
 290
 291         reg = in_be32((void __iomem *)cckctrl_port);
 292         if (reg & CCKCTRL_ATACLKOEN) {
 293                 offset = 1; /* 133MHz */
 294         } else {
 295                 offset = 0; /* 100MHz */
 296         }
 297
 298         switch (speed) {
 299         case XFER_UDMA_6:
 300                 idx = 6;
 301                 break;
 302         case XFER_UDMA_5:
 303                 idx = 5;
 304                 break;
 305         case XFER_UDMA_4:
 306                 idx = 4;
 307                 break;
 308         case XFER_UDMA_3:
 309                 idx = 3;
 310                 break;
 311         case XFER_UDMA_2:
 312                 idx = 2;
 313                 break;
 314         case XFER_UDMA_1:
 315                 idx = 1;
 316                 break;
 317         case XFER_UDMA_0:
 318                 idx = 0;
 319                 break;
 320         default:
 321                 return 1;
 322         }
 323
 324         jcactsel = JCACTSELtbl[offset][idx];
 325         if (is_slave) {
 326                 out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
 327                 out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
 328                 jcactsel = jcactsel << 2;
 329                 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
 330         } else {
 331                 out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
 332                 out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
 333                 out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
 334         }
 335         reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
 336         out_be32((void __iomem *)udenvt_port, reg);
 337
 338         return ide_config_drive_speed(drive, speed);
 339 }
 340
 341 /**
 342  *      scc_config_chipset_for_dma      -       configure for DMA
 343  *      @drive: drive to configure
 344  *
 345  *      Called by scc_config_drive_for_dma().
 346  */
 347
 348 static int scc_config_chipset_for_dma(ide_drive_t *drive)
 349 {
 350         u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
 351
 352         if (!speed)
 353                 return 0;
 354
 355         if (scc_tune_chipset(drive, speed))
 356                 return 0;
 357
 358         return ide_dma_enable(drive);
 359 }
 360
 361 /**
 362  *      scc_configure_drive_for_dma     -       set up for DMA transfers
 363  *      @drive: drive we are going to set up
 364  *
 365  *      Set up the drive for DMA, tune the controller and drive as
 366  *      required.
 367  *      If the drive isn't suitable for DMA or we hit other problems
 368  *      then we will drop down to PIO and set up PIO appropriately.
 369  *      (return 1)
 370  */
 371
 372 static int scc_config_drive_for_dma(ide_drive_t *drive)
 373 {
 374         if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
 375                 return 0;
 376
 377         if (ide_use_fast_pio(drive))
 378                 scc_tuneproc(drive, 4);
 379
 380         return -1;
 381 }
 382
 383 /**
 384  *      scc_ide_dma_setup       -       begin a DMA phase
 385  *      @drive: target device
 386  *
 387  *      Build an IDE DMA PRD (IDE speak for scatter gather table)
 388  *      and then set up the DMA transfer registers.
 389  *
 390  *      Returns 0 on success. If a PIO fallback is required then 1
 391  *      is returned.
 392  */
 393
 394 static int scc_dma_setup(ide_drive_t *drive)
 395 {
 396         ide_hwif_t *hwif = drive->hwif;
 397         struct request *rq = HWGROUP(drive)->rq;
 398         unsigned int reading;
 399         u8 dma_stat;
 400
 401         if (rq_data_dir(rq))
 402                 reading = 0;
 403         else
 404                 reading = 1 << 3;
 405
 406         /* fall back to pio! */
 407         if (!ide_build_dmatable(drive, rq)) {
 408                 ide_map_sg(drive, rq);
 409                 return 1;
 410         }
 411
 412         /* PRD table */
 413         out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
 414
 415         /* specify r/w */
 416         out_be32((void __iomem *)hwif->dma_command, reading);
 417
 418         /* read dma_status for INTR & ERROR flags */
 419         dma_stat = in_be32((void __iomem *)hwif->dma_status);
 420
 421         /* clear INTR & ERROR flags */
 422         out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
 423         drive->waiting_for_dma = 1;
 424         return 0;
 425 }
 426
 427
 428 /**
 429  *      scc_ide_dma_end -       Stop DMA
 430  *      @drive: IDE drive
 431  *
 432  *      Check and clear INT Status register.
 433  *      Then call __ide_dma_end().
 434  */
 435
 436 static int scc_ide_dma_end(ide_drive_t * drive)
 437 {
 438         ide_hwif_t *hwif = HWIF(drive);
 439         unsigned long intsts_port = hwif->dma_base + 0x014;
 440         u32 reg;
 441
 442         while (1) {
 443                 reg = in_be32((void __iomem *)intsts_port);
 444
 445                 if (reg & INTSTS_SERROR) {
 446                         printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
 447                         out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
 448
 449                         out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
 450                         continue;
 451                 }
 452
 453                 if (reg & INTSTS_PRERR) {
 454                         u32 maea0, maec0;
 455                         unsigned long ctl_base = hwif->config_data;
 456
 457                         maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
 458                         maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
 459
 460                         printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
 461
 462                         out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
 463
 464                         out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
 465                         continue;
 466                 }
 467
 468                 if (reg & INTSTS_RERR) {
 469                         printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
 470                         out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
 471
 472                         out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
 473                         continue;
 474                 }
 475
 476                 if (reg & INTSTS_ICERR) {
 477                         out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
 478
 479                         printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
 480                         out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
 481                         continue;
 482                 }
 483
 484                 if (reg & INTSTS_BMSINT) {
 485                         printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
 486                         out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
 487
 488                         ide_do_reset(drive);
 489                         continue;
 490                 }
 491
 492                 if (reg & INTSTS_BMHE) {
 493                         out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
 494                         continue;
 495                 }
 496
 497                 if (reg & INTSTS_ACTEINT) {
 498                         out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
 499                         continue;
 500                 }
 501
 502                 if (reg & INTSTS_IOIRQS) {
 503                         out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
 504                         continue;
 505                 }
 506                 break;
 507         }
 508
 509         return __ide_dma_end(drive);
 510 }
 511
 512 /* returns 1 if dma irq issued, 0 otherwise */
 513 static int scc_dma_test_irq(ide_drive_t *drive)
 514 {
 515         ide_hwif_t *hwif        = HWIF(drive);
 516         u8 dma_stat             = hwif->INB(hwif->dma_status);
 517
 518         /* return 1 if INTR asserted */
 519         if ((dma_stat & 4) == 4)
 520                 return 1;
 521
 522         /* Workaround for PTERADD: emulate DMA_INTR when
 523          * - IDE_STATUS[ERR] = 1
 524          * - INT_STATUS[INTRQ] = 1
 525          * - DMA_STATUS[IORACTA] = 1
 526          */
 527         if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
 528             in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
 529                 dma_stat & 1)
 530                 return 1;
 531
 532         if (!drive->waiting_for_dma)
 533                 printk(KERN_WARNING "%s: (%s) called while not waiting\n",
 534                         drive->name, __FUNCTION__);
 535         return 0;
 536 }
 537
 538 /**
 539  *      setup_mmio_scc  -       map CTRL/BMID region
 540  *      @dev: PCI device we are configuring
 541  *      @name: device name
 542  *
 543  */
 544
 545 static int setup_mmio_scc (struct pci_dev *dev, const char *name)
 546 {
 547         unsigned long ctl_base = pci_resource_start(dev, 0);
 548         unsigned long dma_base = pci_resource_start(dev, 1);
 549         unsigned long ctl_size = pci_resource_len(dev, 0);
 550         unsigned long dma_size = pci_resource_len(dev, 1);
 551         void *ctl_addr;
 552         void *dma_addr;
 553         int i;
 554
 555         for (i = 0; i < MAX_HWIFS; i++) {
 556                 if (scc_ports[i].ctl == 0)
 557                         break;
 558         }
 559         if (i >= MAX_HWIFS)
 560                 return -ENOMEM;
 561
 562         if (!request_mem_region(ctl_base, ctl_size, name)) {
 563                 printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
 564                 goto fail_0;
 565         }
 566
 567         if (!request_mem_region(dma_base, dma_size, name)) {
 568                 printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
 569                 goto fail_1;
 570         }
 571
 572         if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
 573                 goto fail_2;
 574
 575         if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
 576                 goto fail_3;
 577
 578         pci_set_master(dev);
 579         scc_ports[i].ctl = (unsigned long)ctl_addr;
 580         scc_ports[i].dma = (unsigned long)dma_addr;
 581         pci_set_drvdata(dev, (void *) &scc_ports[i]);
 582
 583         return 1;
 584
 585  fail_3:
 586         iounmap(ctl_addr);
 587  fail_2:
 588         release_mem_region(dma_base, dma_size);
 589  fail_1:
 590         release_mem_region(ctl_base, ctl_size);
 591  fail_0:
 592         return -ENOMEM;
 593 }
 594
 595 /**
 596  *      init_setup_scc  -       set up an SCC PATA Controller
 597  *      @dev: PCI device
 598  *      @d: IDE PCI device
 599  *
 600  *      Perform the initial set up for this device.
 601  */
 602
 603 static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
 604 {
 605         unsigned long ctl_base;
 606         unsigned long dma_base;
 607         unsigned long cckctrl_port;
 608         unsigned long intmask_port;
 609         unsigned long mode_port;
 610         unsigned long ecmode_port;
 611         unsigned long dma_status_port;
 612         u32 reg = 0;
 613         struct scc_ports *ports;
 614         int rc;
 615
 616         rc = setup_mmio_scc(dev, d->name);
 617         if (rc < 0) {
 618                 return rc;
 619         }
 620
 621         ports = pci_get_drvdata(dev);
 622         ctl_base = ports->ctl;
 623         dma_base = ports->dma;
 624         cckctrl_port = ctl_base + 0xff0;
 625         intmask_port = dma_base + 0x010;
 626         mode_port = ctl_base + 0x024;
 627         ecmode_port = ctl_base + 0xf00;
 628         dma_status_port = dma_base + 0x004;
 629
 630         /* controller initialization */
 631         reg = 0;
 632         out_be32((void*)cckctrl_port, reg);
 633         reg |= CCKCTRL_ATACLKOEN;
 634         out_be32((void*)cckctrl_port, reg);
 635         reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
 636         out_be32((void*)cckctrl_port, reg);
 637         reg |= CCKCTRL_CRST;
 638         out_be32((void*)cckctrl_port, reg);
 639
 640         for (;;) {
 641                 reg = in_be32((void*)cckctrl_port);
 642                 if (reg & CCKCTRL_CRST)
 643                         break;
 644                 udelay(5000);
 645         }
 646
 647         reg |= CCKCTRL_ATARESET;
 648         out_be32((void*)cckctrl_port, reg);
 649
 650         out_be32((void*)ecmode_port, ECMODE_VALUE);
 651         out_be32((void*)mode_port, MODE_JCUSFEN);
 652         out_be32((void*)intmask_port, INTMASK_MSK);
 653
 654         return ide_setup_pci_device(dev, d);
 655 }
 656
 657 /**
 658  *      init_mmio_iops_scc      -       set up the iops for MMIO
 659  *      @hwif: interface to set up
 660  *
 661  */
 662
 663 static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
 664 {
 665         struct pci_dev *dev = hwif->pci_dev;
 666         struct scc_ports *ports = pci_get_drvdata(dev);
 667         unsigned long dma_base = ports->dma;
 668
 669         ide_set_hwifdata(hwif, ports);
 670
 671         hwif->INB = scc_ide_inb;
 672         hwif->INW = scc_ide_inw;
 673         hwif->INSW = scc_ide_insw;
 674         hwif->INSL = scc_ide_insl;
 675         hwif->OUTB = scc_ide_outb;
 676         hwif->OUTBSYNC = scc_ide_outbsync;
 677         hwif->OUTW = scc_ide_outw;
 678         hwif->OUTSW = scc_ide_outsw;
 679         hwif->OUTSL = scc_ide_outsl;
 680
 681         hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
 682         hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
 683         hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
 684         hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
 685         hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
 686         hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
 687         hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
 688         hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
 689         hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
 690
 691         hwif->irq = hwif->pci_dev->irq;
 692         hwif->dma_base = dma_base;
 693         hwif->config_data = ports->ctl;
 694         hwif->mmio = 1;
 695 }
 696
 697 /**
 698  *      init_iops_scc   -       set up iops
 699  *      @hwif: interface to set up
 700  *
 701  *      Do the basic setup for the SCC hardware interface
 702  *      and then do the MMIO setup.
 703  */
 704
 705 static void __devinit init_iops_scc(ide_hwif_t *hwif)
 706 {
 707         struct pci_dev *dev =  hwif->pci_dev;
 708         hwif->hwif_data = NULL;
 709         if (pci_get_drvdata(dev) == NULL)
 710                 return;
 711         init_mmio_iops_scc(hwif);
 712 }
 713
 714 /**
 715  *      init_hwif_scc   -       set up hwif
 716  *      @hwif: interface to set up
 717  *
 718  *      We do the basic set up of the interface structure. The SCC
 719  *      requires several custom handlers so we override the default
 720  *      ide DMA handlers appropriately.
 721  */
 722
 723 static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 724 {
 725         struct scc_ports *ports = ide_get_hwifdata(hwif);
 726
 727         ports->hwif_id = hwif->index;
 728
 729         hwif->dma_command = hwif->dma_base;
 730         hwif->dma_status = hwif->dma_base + 0x04;
 731         hwif->dma_prdtable = hwif->dma_base + 0x08;
 732
 733         /* PTERADD */
 734         out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
 735
 736         hwif->dma_setup = scc_dma_setup;
 737         hwif->ide_dma_end = scc_ide_dma_end;
 738         hwif->speedproc = scc_tune_chipset;
 739         hwif->tuneproc = scc_tuneproc;
 740         hwif->ide_dma_check = scc_config_drive_for_dma;
 741         hwif->ide_dma_test_irq = scc_dma_test_irq;
 742
 743         hwif->drives[0].autotune = IDE_TUNE_AUTO;
 744         hwif->drives[1].autotune = IDE_TUNE_AUTO;
 745
 746         if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) {
 747                 hwif->ultra_mask = 0x7f; /* 133MHz */
 748         } else {
 749                 hwif->ultra_mask = 0x3f; /* 100MHz */
 750         }
 751         hwif->mwdma_mask = 0x00;
 752         hwif->swdma_mask = 0x00;
 753         hwif->atapi_dma = 1;
 754
 755         /* we support 80c cable only. */
 756         hwif->udma_four = 1;
 757
 758         hwif->autodma = 0;
 759         if (!noautodma)
 760                 hwif->autodma = 1;
 761         hwif->drives[0].autodma = hwif->autodma;
 762         hwif->drives[1].autodma = hwif->autodma;
 763 }
 764
 765 #define DECLARE_SCC_DEV(name_str)                       \
 766   {                                                     \
 767       .name             = name_str,                     \
 768       .init_setup       = init_setup_scc,               \
 769       .init_iops        = init_iops_scc,                \
 770       .init_hwif        = init_hwif_scc,                \
 771       .channels = 1,                                    \
 772       .autodma  = AUTODMA,                              \
 773       .bootable = ON_BOARD,                             \
 774   }
 775
 776 static ide_pci_device_t scc_chipsets[] __devinitdata = {
 777         /* 0 */ DECLARE_SCC_DEV("sccIDE"),
 778 };
 779
 780 /**
 781  *      scc_init_one    -       pci layer discovery entry
 782  *      @dev: PCI device
 783  *      @id: ident table entry
 784  *
 785  *      Called by the PCI code when it finds an SCC PATA controller.
 786  *      We then use the IDE PCI generic helper to do most of the work.
 787  */
 788
 789 static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 790 {
 791         ide_pci_device_t *d = &scc_chipsets[id->driver_data];
 792         return d->init_setup(dev, d);
 793 }
 794
 795 /**
 796  *      scc_remove      -       pci layer remove entry
 797  *      @dev: PCI device
 798  *
 799  *      Called by the PCI code when it removes an SCC PATA controller.
 800  */
 801
 802 static void __devexit scc_remove(struct pci_dev *dev)
 803 {
 804         struct scc_ports *ports = pci_get_drvdata(dev);
 805         ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
 806         unsigned long ctl_base = pci_resource_start(dev, 0);
 807         unsigned long dma_base = pci_resource_start(dev, 1);
 808         unsigned long ctl_size = pci_resource_len(dev, 0);
 809         unsigned long dma_size = pci_resource_len(dev, 1);
 810
 811         if (hwif->dmatable_cpu) {
 812                 pci_free_consistent(hwif->pci_dev,
 813                                     PRD_ENTRIES * PRD_BYTES,
 814                                     hwif->dmatable_cpu,
 815                                     hwif->dmatable_dma);
 816                 hwif->dmatable_cpu = NULL;
 817         }
 818
 819         ide_unregister(hwif->index);
 820
 821         hwif->chipset = ide_unknown;
 822         iounmap((void*)ports->dma);
 823         iounmap((void*)ports->ctl);
 824         release_mem_region(dma_base, dma_size);
 825         release_mem_region(ctl_base, ctl_size);
 826         memset(ports, 0, sizeof(*ports));
 827 }
 828
 829 static struct pci_device_id scc_pci_tbl[] = {
 830         { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 831         { 0, },
 832 };
 833 MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
 834
 835 static struct pci_driver driver = {
 836         .name = "SCC IDE",
 837         .id_table = scc_pci_tbl,
 838         .probe = scc_init_one,
 839         .remove = scc_remove,
 840 };
 841
 842 static int scc_ide_init(void)
 843 {
 844         return ide_pci_register_driver(&driver);
 845 }
 846
 847 module_init(scc_ide_init);
 848 /* -- No exit code?
 849 static void scc_ide_exit(void)
 850 {
 851         ide_pci_unregister_driver(&driver);
 852 }
 853 module_exit(scc_ide_exit);
 854  */
 855
 856
 857 MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
 858 MODULE_LICENSE("GPL");