V4L/DVB (5618): Cx88: Drop the generic i2c client from cx88-vp3054-i2c
[linux-2.6/kvm.git] / drivers / media / video / tvp5150.c
blobd5ec05f56adfad470a6edca177746a134113290a
1 /*
2 * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
4 * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5 * This code is placed under the terms of the GNU General Public License v2
6 */
8 #include <linux/i2c.h>
9 #include <linux/videodev.h>
10 #include <linux/delay.h>
11 #include <linux/video_decoder.h>
12 #include <media/v4l2-common.h>
13 #include <media/tvp5150.h>
15 #include "tvp5150_reg.h"
17 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
18 MODULE_AUTHOR("Mauro Carvalho Chehab");
19 MODULE_LICENSE("GPL");
21 /* standard i2c insmod options */
22 static unsigned short normal_i2c[] = {
23 0xb8 >> 1,
24 0xba >> 1,
25 I2C_CLIENT_END
28 I2C_CLIENT_INSMOD;
30 static int debug = 0;
31 module_param(debug, int, 0);
32 MODULE_PARM_DESC(debug, "Debug level (0-1)");
34 #define tvp5150_err(fmt, arg...) do { \
35 printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \
36 i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
37 #define tvp5150_info(fmt, arg...) do { \
38 printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \
39 i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
40 #define tvp5150_dbg(num, fmt, arg...) \
41 do { \
42 if (debug >= num) \
43 printk(KERN_DEBUG "%s debug %d-%04x: " fmt,\
44 c->driver->driver.name, \
45 i2c_adapter_id(c->adapter), \
46 c->addr , ## arg); } while (0)
48 /* supported controls */
49 static struct v4l2_queryctrl tvp5150_qctrl[] = {
51 .id = V4L2_CID_BRIGHTNESS,
52 .type = V4L2_CTRL_TYPE_INTEGER,
53 .name = "Brightness",
54 .minimum = 0,
55 .maximum = 255,
56 .step = 1,
57 .default_value = 128,
58 .flags = 0,
59 }, {
60 .id = V4L2_CID_CONTRAST,
61 .type = V4L2_CTRL_TYPE_INTEGER,
62 .name = "Contrast",
63 .minimum = 0,
64 .maximum = 255,
65 .step = 0x1,
66 .default_value = 128,
67 .flags = 0,
68 }, {
69 .id = V4L2_CID_SATURATION,
70 .type = V4L2_CTRL_TYPE_INTEGER,
71 .name = "Saturation",
72 .minimum = 0,
73 .maximum = 255,
74 .step = 0x1,
75 .default_value = 128,
76 .flags = 0,
77 }, {
78 .id = V4L2_CID_HUE,
79 .type = V4L2_CTRL_TYPE_INTEGER,
80 .name = "Hue",
81 .minimum = -128,
82 .maximum = 127,
83 .step = 0x1,
84 .default_value = 0,
85 .flags = 0,
89 struct tvp5150 {
90 struct i2c_client *client;
92 v4l2_std_id norm; /* Current set standard */
93 struct v4l2_routing route;
94 int enable;
95 int bright;
96 int contrast;
97 int hue;
98 int sat;
101 static int tvp5150_read(struct i2c_client *c, unsigned char addr)
103 unsigned char buffer[1];
104 int rc;
106 buffer[0] = addr;
107 if (1 != (rc = i2c_master_send(c, buffer, 1)))
108 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
110 msleep(10);
112 if (1 != (rc = i2c_master_recv(c, buffer, 1)))
113 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
115 tvp5150_dbg(2, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
117 return (buffer[0]);
120 static inline void tvp5150_write(struct i2c_client *c, unsigned char addr,
121 unsigned char value)
123 unsigned char buffer[2];
124 int rc;
126 buffer[0] = addr;
127 buffer[1] = value;
128 tvp5150_dbg(2, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
129 if (2 != (rc = i2c_master_send(c, buffer, 2)))
130 tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc);
133 static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,int max_line)
135 int i=0;
137 while (init!=(u8)(end+1)) {
138 if ((i%max_line) == 0) {
139 if (i>0)
140 printk("\n");
141 printk("tvp5150: %s reg 0x%02x = ",s,init);
143 printk("%02x ",tvp5150_read(c, init));
145 init++;
146 i++;
148 printk("\n");
151 static void dump_reg(struct i2c_client *c)
153 printk("tvp5150: Video input source selection #1 = 0x%02x\n",
154 tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1));
155 printk("tvp5150: Analog channel controls = 0x%02x\n",
156 tvp5150_read(c, TVP5150_ANAL_CHL_CTL));
157 printk("tvp5150: Operation mode controls = 0x%02x\n",
158 tvp5150_read(c, TVP5150_OP_MODE_CTL));
159 printk("tvp5150: Miscellaneous controls = 0x%02x\n",
160 tvp5150_read(c, TVP5150_MISC_CTL));
161 printk("tvp5150: Autoswitch mask= 0x%02x\n",
162 tvp5150_read(c, TVP5150_AUTOSW_MSK));
163 printk("tvp5150: Color killer threshold control = 0x%02x\n",
164 tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL));
165 printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
166 tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1),
167 tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2),
168 tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3));
169 printk("tvp5150: Brightness control = 0x%02x\n",
170 tvp5150_read(c, TVP5150_BRIGHT_CTL));
171 printk("tvp5150: Color saturation control = 0x%02x\n",
172 tvp5150_read(c, TVP5150_SATURATION_CTL));
173 printk("tvp5150: Hue control = 0x%02x\n",
174 tvp5150_read(c, TVP5150_HUE_CTL));
175 printk("tvp5150: Contrast control = 0x%02x\n",
176 tvp5150_read(c, TVP5150_CONTRAST_CTL));
177 printk("tvp5150: Outputs and data rates select = 0x%02x\n",
178 tvp5150_read(c, TVP5150_DATA_RATE_SEL));
179 printk("tvp5150: Configuration shared pins = 0x%02x\n",
180 tvp5150_read(c, TVP5150_CONF_SHARED_PIN));
181 printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
182 tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB),
183 tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB));
184 printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
185 tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB),
186 tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB));
187 printk("tvp5150: Genlock/RTC = 0x%02x\n",
188 tvp5150_read(c, TVP5150_GENLOCK));
189 printk("tvp5150: Horizontal sync start = 0x%02x\n",
190 tvp5150_read(c, TVP5150_HORIZ_SYNC_START));
191 printk("tvp5150: Vertical blanking start = 0x%02x\n",
192 tvp5150_read(c, TVP5150_VERT_BLANKING_START));
193 printk("tvp5150: Vertical blanking stop = 0x%02x\n",
194 tvp5150_read(c, TVP5150_VERT_BLANKING_STOP));
195 printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
196 tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1),
197 tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2));
198 printk("tvp5150: Interrupt reset register B = 0x%02x\n",
199 tvp5150_read(c, TVP5150_INT_RESET_REG_B));
200 printk("tvp5150: Interrupt enable register B = 0x%02x\n",
201 tvp5150_read(c, TVP5150_INT_ENABLE_REG_B));
202 printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
203 tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B));
204 printk("tvp5150: Video standard = 0x%02x\n",
205 tvp5150_read(c, TVP5150_VIDEO_STD));
206 printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
207 tvp5150_read(c, TVP5150_CB_GAIN_FACT),
208 tvp5150_read(c, TVP5150_CR_GAIN_FACTOR));
209 printk("tvp5150: Macrovision on counter = 0x%02x\n",
210 tvp5150_read(c, TVP5150_MACROVISION_ON_CTR));
211 printk("tvp5150: Macrovision off counter = 0x%02x\n",
212 tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR));
213 printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
214 (tvp5150_read(c, TVP5150_REV_SELECT)&1)?3:4);
215 printk("tvp5150: Device ID = %02x%02x\n",
216 tvp5150_read(c, TVP5150_MSB_DEV_ID),
217 tvp5150_read(c, TVP5150_LSB_DEV_ID));
218 printk("tvp5150: ROM version = (hex) %02x.%02x\n",
219 tvp5150_read(c, TVP5150_ROM_MAJOR_VER),
220 tvp5150_read(c, TVP5150_ROM_MINOR_VER));
221 printk("tvp5150: Vertical line count = 0x%02x%02x\n",
222 tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB),
223 tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB));
224 printk("tvp5150: Interrupt status register B = 0x%02x\n",
225 tvp5150_read(c, TVP5150_INT_STATUS_REG_B));
226 printk("tvp5150: Interrupt active register B = 0x%02x\n",
227 tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B));
228 printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
229 tvp5150_read(c, TVP5150_STATUS_REG_1),
230 tvp5150_read(c, TVP5150_STATUS_REG_2),
231 tvp5150_read(c, TVP5150_STATUS_REG_3),
232 tvp5150_read(c, TVP5150_STATUS_REG_4),
233 tvp5150_read(c, TVP5150_STATUS_REG_5));
235 dump_reg_range(c,"Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
236 TVP5150_TELETEXT_FIL1_END,8);
237 dump_reg_range(c,"Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
238 TVP5150_TELETEXT_FIL2_END,8);
240 printk("tvp5150: Teletext filter enable = 0x%02x\n",
241 tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA));
242 printk("tvp5150: Interrupt status register A = 0x%02x\n",
243 tvp5150_read(c, TVP5150_INT_STATUS_REG_A));
244 printk("tvp5150: Interrupt enable register A = 0x%02x\n",
245 tvp5150_read(c, TVP5150_INT_ENABLE_REG_A));
246 printk("tvp5150: Interrupt configuration = 0x%02x\n",
247 tvp5150_read(c, TVP5150_INT_CONF));
248 printk("tvp5150: VDP status register = 0x%02x\n",
249 tvp5150_read(c, TVP5150_VDP_STATUS_REG));
250 printk("tvp5150: FIFO word count = 0x%02x\n",
251 tvp5150_read(c, TVP5150_FIFO_WORD_COUNT));
252 printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
253 tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD));
254 printk("tvp5150: FIFO reset = 0x%02x\n",
255 tvp5150_read(c, TVP5150_FIFO_RESET));
256 printk("tvp5150: Line number interrupt = 0x%02x\n",
257 tvp5150_read(c, TVP5150_LINE_NUMBER_INT));
258 printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
259 tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH),
260 tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW));
261 printk("tvp5150: FIFO output control = 0x%02x\n",
262 tvp5150_read(c, TVP5150_FIFO_OUT_CTRL));
263 printk("tvp5150: Full field enable = 0x%02x\n",
264 tvp5150_read(c, TVP5150_FULL_FIELD_ENA));
265 printk("tvp5150: Full field mode register = 0x%02x\n",
266 tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG));
268 dump_reg_range(c,"CC data", TVP5150_CC_DATA_INI,
269 TVP5150_CC_DATA_END,8);
271 dump_reg_range(c,"WSS data", TVP5150_WSS_DATA_INI,
272 TVP5150_WSS_DATA_END,8);
274 dump_reg_range(c,"VPS data", TVP5150_VPS_DATA_INI,
275 TVP5150_VPS_DATA_END,8);
277 dump_reg_range(c,"VITC data", TVP5150_VITC_DATA_INI,
278 TVP5150_VITC_DATA_END,10);
280 dump_reg_range(c,"Line mode", TVP5150_LINE_MODE_INI,
281 TVP5150_LINE_MODE_END,8);
284 /****************************************************************************
285 Basic functions
286 ****************************************************************************/
288 static inline void tvp5150_selmux(struct i2c_client *c)
290 int opmode=0;
291 struct tvp5150 *decoder = i2c_get_clientdata(c);
292 int input = 0;
294 if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable)
295 input = 8;
297 switch (decoder->route.input) {
298 case TVP5150_COMPOSITE1:
299 input |= 2;
300 /* fall through */
301 case TVP5150_COMPOSITE0:
302 opmode=0x30; /* TV Mode */
303 break;
304 case TVP5150_SVIDEO:
305 default:
306 input |= 1;
307 opmode=0; /* Auto Mode */
308 break;
311 tvp5150_dbg( 1, "Selecting video route: route input=%i, output=%i "
312 "=> tvp5150 input=%i, opmode=%i\n",
313 decoder->route.input,decoder->route.output,
314 input, opmode );
316 tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
317 tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
320 struct i2c_reg_value {
321 unsigned char reg;
322 unsigned char value;
325 /* Default values as sugested at TVP5150AM1 datasheet */
326 static const struct i2c_reg_value tvp5150_init_default[] = {
327 { /* 0x00 */
328 TVP5150_VD_IN_SRC_SEL_1,0x00
330 { /* 0x01 */
331 TVP5150_ANAL_CHL_CTL,0x15
333 { /* 0x02 */
334 TVP5150_OP_MODE_CTL,0x00
336 { /* 0x03 */
337 TVP5150_MISC_CTL,0x01
339 { /* 0x06 */
340 TVP5150_COLOR_KIL_THSH_CTL,0x10
342 { /* 0x07 */
343 TVP5150_LUMA_PROC_CTL_1,0x60
345 { /* 0x08 */
346 TVP5150_LUMA_PROC_CTL_2,0x00
348 { /* 0x09 */
349 TVP5150_BRIGHT_CTL,0x80
351 { /* 0x0a */
352 TVP5150_SATURATION_CTL,0x80
354 { /* 0x0b */
355 TVP5150_HUE_CTL,0x00
357 { /* 0x0c */
358 TVP5150_CONTRAST_CTL,0x80
360 { /* 0x0d */
361 TVP5150_DATA_RATE_SEL,0x47
363 { /* 0x0e */
364 TVP5150_LUMA_PROC_CTL_3,0x00
366 { /* 0x0f */
367 TVP5150_CONF_SHARED_PIN,0x08
369 { /* 0x11 */
370 TVP5150_ACT_VD_CROP_ST_MSB,0x00
372 { /* 0x12 */
373 TVP5150_ACT_VD_CROP_ST_LSB,0x00
375 { /* 0x13 */
376 TVP5150_ACT_VD_CROP_STP_MSB,0x00
378 { /* 0x14 */
379 TVP5150_ACT_VD_CROP_STP_LSB,0x00
381 { /* 0x15 */
382 TVP5150_GENLOCK,0x01
384 { /* 0x16 */
385 TVP5150_HORIZ_SYNC_START,0x80
387 { /* 0x18 */
388 TVP5150_VERT_BLANKING_START,0x00
390 { /* 0x19 */
391 TVP5150_VERT_BLANKING_STOP,0x00
393 { /* 0x1a */
394 TVP5150_CHROMA_PROC_CTL_1,0x0c
396 { /* 0x1b */
397 TVP5150_CHROMA_PROC_CTL_2,0x14
399 { /* 0x1c */
400 TVP5150_INT_RESET_REG_B,0x00
402 { /* 0x1d */
403 TVP5150_INT_ENABLE_REG_B,0x00
405 { /* 0x1e */
406 TVP5150_INTT_CONFIG_REG_B,0x00
408 { /* 0x28 */
409 TVP5150_VIDEO_STD,0x00
411 { /* 0x2e */
412 TVP5150_MACROVISION_ON_CTR,0x0f
414 { /* 0x2f */
415 TVP5150_MACROVISION_OFF_CTR,0x01
417 { /* 0xbb */
418 TVP5150_TELETEXT_FIL_ENA,0x00
420 { /* 0xc0 */
421 TVP5150_INT_STATUS_REG_A,0x00
423 { /* 0xc1 */
424 TVP5150_INT_ENABLE_REG_A,0x00
426 { /* 0xc2 */
427 TVP5150_INT_CONF,0x04
429 { /* 0xc8 */
430 TVP5150_FIFO_INT_THRESHOLD,0x80
432 { /* 0xc9 */
433 TVP5150_FIFO_RESET,0x00
435 { /* 0xca */
436 TVP5150_LINE_NUMBER_INT,0x00
438 { /* 0xcb */
439 TVP5150_PIX_ALIGN_REG_LOW,0x4e
441 { /* 0xcc */
442 TVP5150_PIX_ALIGN_REG_HIGH,0x00
444 { /* 0xcd */
445 TVP5150_FIFO_OUT_CTRL,0x01
447 { /* 0xcf */
448 TVP5150_FULL_FIELD_ENA,0x00
450 { /* 0xd0 */
451 TVP5150_LINE_MODE_INI,0x00
453 { /* 0xfc */
454 TVP5150_FULL_FIELD_MODE_REG,0x7f
456 { /* end of data */
457 0xff,0xff
461 /* Default values as sugested at TVP5150AM1 datasheet */
462 static const struct i2c_reg_value tvp5150_init_enable[] = {
464 TVP5150_CONF_SHARED_PIN, 2
465 },{ /* Automatic offset and AGC enabled */
466 TVP5150_ANAL_CHL_CTL, 0x15
467 },{ /* Activate YCrCb output 0x9 or 0xd ? */
468 TVP5150_MISC_CTL, 0x6f
469 },{ /* Activates video std autodetection for all standards */
470 TVP5150_AUTOSW_MSK, 0x0
471 },{ /* Default format: 0x47. For 4:2:2: 0x40 */
472 TVP5150_DATA_RATE_SEL, 0x47
474 TVP5150_CHROMA_PROC_CTL_1, 0x0c
476 TVP5150_CHROMA_PROC_CTL_2, 0x54
477 },{ /* Non documented, but initialized on WinTV USB2 */
478 0x27, 0x20
480 0xff,0xff
484 struct tvp5150_vbi_type {
485 unsigned int vbi_type;
486 unsigned int ini_line;
487 unsigned int end_line;
488 unsigned int by_field :1;
491 struct i2c_vbi_ram_value {
492 u16 reg;
493 struct tvp5150_vbi_type type;
494 unsigned char values[16];
497 /* This struct have the values for each supported VBI Standard
498 * by
499 tvp5150_vbi_types should follow the same order as vbi_ram_default
500 * value 0 means rom position 0x10, value 1 means rom position 0x30
501 * and so on. There are 16 possible locations from 0 to 15.
504 static struct i2c_vbi_ram_value vbi_ram_default[] =
506 /* FIXME: Current api doesn't handle all VBI types, those not
507 yet supported are placed under #if 0 */
508 #if 0
509 {0x010, /* Teletext, SECAM, WST System A */
510 {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
511 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
512 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
514 #endif
515 {0x030, /* Teletext, PAL, WST System B */
516 {V4L2_SLICED_TELETEXT_B,6,22,1},
517 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
518 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
520 #if 0
521 {0x050, /* Teletext, PAL, WST System C */
522 {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
523 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
524 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
526 {0x070, /* Teletext, NTSC, WST System B */
527 {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
528 { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
529 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
531 {0x090, /* Tetetext, NTSC NABTS System C */
532 {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
533 { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
534 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
536 {0x0b0, /* Teletext, NTSC-J, NABTS System D */
537 {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
538 { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
539 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
541 {0x0d0, /* Closed Caption, PAL/SECAM */
542 {V4L2_SLICED_CAPTION_625,22,22,1},
543 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
544 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
546 #endif
547 {0x0f0, /* Closed Caption, NTSC */
548 {V4L2_SLICED_CAPTION_525,21,21,1},
549 { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
550 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
552 {0x110, /* Wide Screen Signal, PAL/SECAM */
553 {V4L2_SLICED_WSS_625,23,23,1},
554 { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
555 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
557 #if 0
558 {0x130, /* Wide Screen Signal, NTSC C */
559 {V4L2_SLICED_WSS_525,20,20,1},
560 { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
561 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
563 {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
564 {V4l2_SLICED_VITC_625,6,22,0},
565 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
566 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
568 {0x170, /* Vertical Interval Timecode (VITC), NTSC */
569 {V4l2_SLICED_VITC_525,10,20,0},
570 { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
571 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
573 #endif
574 {0x190, /* Video Program System (VPS), PAL */
575 {V4L2_SLICED_VPS,16,16,0},
576 { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
577 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
579 /* 0x1d0 User programmable */
581 /* End of struct */
582 { (u16)-1 }
585 static int tvp5150_write_inittab(struct i2c_client *c,
586 const struct i2c_reg_value *regs)
588 while (regs->reg != 0xff) {
589 tvp5150_write(c, regs->reg, regs->value);
590 regs++;
592 return 0;
595 static int tvp5150_vdp_init(struct i2c_client *c,
596 const struct i2c_vbi_ram_value *regs)
598 unsigned int i;
600 /* Disable Full Field */
601 tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
603 /* Before programming, Line mode should be at 0xff */
604 for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
605 tvp5150_write(c, i, 0xff);
607 /* Load Ram Table */
608 while (regs->reg != (u16)-1 ) {
609 tvp5150_write(c, TVP5150_CONF_RAM_ADDR_HIGH,regs->reg>>8);
610 tvp5150_write(c, TVP5150_CONF_RAM_ADDR_LOW,regs->reg);
612 for (i=0;i<16;i++)
613 tvp5150_write(c, TVP5150_VDP_CONF_RAM_DATA,regs->values[i]);
615 regs++;
617 return 0;
620 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
621 static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
622 struct v4l2_sliced_vbi_cap *cap)
624 int line;
626 memset(cap, 0, sizeof *cap);
628 while (regs->reg != (u16)-1 ) {
629 for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
630 cap->service_lines[0][line] |= regs->type.vbi_type;
632 cap->service_set |= regs->type.vbi_type;
634 regs++;
638 /* Set vbi processing
639 * type - one of tvp5150_vbi_types
640 * line - line to gather data
641 * fields: bit 0 field1, bit 1, field2
642 * flags (default=0xf0) is a bitmask, were set means:
643 * bit 7: enable filtering null bytes on CC
644 * bit 6: send data also to FIFO
645 * bit 5: don't allow data with errors on FIFO
646 * bit 4: enable ECC when possible
647 * pix_align = pix alignment:
648 * LSB = field1
649 * MSB = field2
651 static int tvp5150_set_vbi(struct i2c_client *c,
652 const struct i2c_vbi_ram_value *regs,
653 unsigned int type,u8 flags, int line,
654 const int fields)
656 struct tvp5150 *decoder = i2c_get_clientdata(c);
657 v4l2_std_id std=decoder->norm;
658 u8 reg;
659 int pos=0;
661 if (std == V4L2_STD_ALL) {
662 tvp5150_err("VBI can't be configured without knowing number of lines\n");
663 return 0;
664 } else if (std && V4L2_STD_625_50) {
665 /* Don't follow NTSC Line number convension */
666 line += 3;
669 if (line<6||line>27)
670 return 0;
672 while (regs->reg != (u16)-1 ) {
673 if ((type & regs->type.vbi_type) &&
674 (line>=regs->type.ini_line) &&
675 (line<=regs->type.end_line)) {
676 type=regs->type.vbi_type;
677 break;
680 regs++;
681 pos++;
683 if (regs->reg == (u16)-1)
684 return 0;
686 type=pos | (flags & 0xf0);
687 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
689 if (fields&1) {
690 tvp5150_write(c, reg, type);
693 if (fields&2) {
694 tvp5150_write(c, reg+1, type);
697 return type;
700 static int tvp5150_get_vbi(struct i2c_client *c,
701 const struct i2c_vbi_ram_value *regs, int line)
703 struct tvp5150 *decoder = i2c_get_clientdata(c);
704 v4l2_std_id std=decoder->norm;
705 u8 reg;
706 int pos, type=0;
708 if (std == V4L2_STD_ALL) {
709 tvp5150_err("VBI can't be configured without knowing number of lines\n");
710 return 0;
711 } else if (std && V4L2_STD_625_50) {
712 /* Don't follow NTSC Line number convension */
713 line += 3;
716 if (line<6||line>27)
717 return 0;
719 reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
721 pos=tvp5150_read(c, reg)&0x0f;
722 if (pos<0x0f)
723 type=regs[pos].type.vbi_type;
725 pos=tvp5150_read(c, reg+1)&0x0f;
726 if (pos<0x0f)
727 type|=regs[pos].type.vbi_type;
729 return type;
731 static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std)
733 struct tvp5150 *decoder = i2c_get_clientdata(c);
734 int fmt=0;
736 decoder->norm=std;
738 /* First tests should be against specific std */
740 if (std == V4L2_STD_ALL) {
741 fmt=0; /* Autodetect mode */
742 } else if (std & V4L2_STD_NTSC_443) {
743 fmt=0xa;
744 } else if (std & V4L2_STD_PAL_M) {
745 fmt=0x6;
746 } else if (std & (V4L2_STD_PAL_N| V4L2_STD_PAL_Nc)) {
747 fmt=0x8;
748 } else {
749 /* Then, test against generic ones */
750 if (std & V4L2_STD_NTSC) {
751 fmt=0x2;
752 } else if (std & V4L2_STD_PAL) {
753 fmt=0x4;
754 } else if (std & V4L2_STD_SECAM) {
755 fmt=0xc;
759 tvp5150_dbg(1,"Set video std register to %d.\n",fmt);
760 tvp5150_write(c, TVP5150_VIDEO_STD, fmt);
762 return 0;
765 static inline void tvp5150_reset(struct i2c_client *c)
767 u8 msb_id, lsb_id, msb_rom, lsb_rom;
768 struct tvp5150 *decoder = i2c_get_clientdata(c);
770 msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
771 lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
772 msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
773 lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
775 if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
776 tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
778 /* ITU-T BT.656.4 timing */
779 tvp5150_write(c,TVP5150_REV_SELECT,0);
780 } else {
781 if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
782 tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
783 } else {
784 tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
785 tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
789 /* Initializes TVP5150 to its default values */
790 tvp5150_write_inittab(c, tvp5150_init_default);
792 /* Initializes VDP registers */
793 tvp5150_vdp_init(c, vbi_ram_default);
795 /* Selects decoder input */
796 tvp5150_selmux(c);
798 /* Initializes TVP5150 to stream enabled values */
799 tvp5150_write_inittab(c, tvp5150_init_enable);
801 /* Initialize image preferences */
802 tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright >> 8);
803 tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast >> 8);
804 tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast >> 8);
805 tvp5150_write(c, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8);
807 tvp5150_set_std(c, decoder->norm);
810 static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
812 /* struct tvp5150 *decoder = i2c_get_clientdata(c); */
814 switch (ctrl->id) {
815 case V4L2_CID_BRIGHTNESS:
816 ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL);
817 return 0;
818 case V4L2_CID_CONTRAST:
819 ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL);
820 return 0;
821 case V4L2_CID_SATURATION:
822 ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL);
823 return 0;
824 case V4L2_CID_HUE:
825 ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL);
826 return 0;
828 return -EINVAL;
831 static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
833 /* struct tvp5150 *decoder = i2c_get_clientdata(c); */
835 switch (ctrl->id) {
836 case V4L2_CID_BRIGHTNESS:
837 tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value);
838 return 0;
839 case V4L2_CID_CONTRAST:
840 tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value);
841 return 0;
842 case V4L2_CID_SATURATION:
843 tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value);
844 return 0;
845 case V4L2_CID_HUE:
846 tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value);
847 return 0;
849 return -EINVAL;
852 /****************************************************************************
853 I2C Command
854 ****************************************************************************/
855 static int tvp5150_command(struct i2c_client *c,
856 unsigned int cmd, void *arg)
858 struct tvp5150 *decoder = i2c_get_clientdata(c);
860 switch (cmd) {
862 case 0:
863 case VIDIOC_INT_RESET:
864 tvp5150_reset(c);
865 break;
866 case VIDIOC_INT_G_VIDEO_ROUTING:
868 struct v4l2_routing *route = arg;
870 *route = decoder->route;
871 break;
873 case VIDIOC_INT_S_VIDEO_ROUTING:
875 struct v4l2_routing *route = arg;
877 decoder->route = *route;
878 tvp5150_selmux(c);
879 break;
881 case VIDIOC_S_STD:
882 if (decoder->norm == *(v4l2_std_id *)arg)
883 break;
884 return tvp5150_set_std(c, *(v4l2_std_id *)arg);
885 case VIDIOC_G_STD:
886 *(v4l2_std_id *)arg = decoder->norm;
887 break;
889 case VIDIOC_G_SLICED_VBI_CAP:
891 struct v4l2_sliced_vbi_cap *cap = arg;
892 tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n");
894 tvp5150_vbi_get_cap(vbi_ram_default, cap);
895 break;
897 case VIDIOC_S_FMT:
899 struct v4l2_format *fmt;
900 struct v4l2_sliced_vbi_format *svbi;
901 int i;
903 fmt = arg;
904 if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
905 return -EINVAL;
906 svbi = &fmt->fmt.sliced;
907 if (svbi->service_set != 0) {
908 for (i = 0; i <= 23; i++) {
909 svbi->service_lines[1][i] = 0;
911 svbi->service_lines[0][i]=tvp5150_set_vbi(c,
912 vbi_ram_default,
913 svbi->service_lines[0][i],0xf0,i,3);
915 /* Enables FIFO */
916 tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1);
917 } else {
918 /* Disables FIFO*/
919 tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0);
921 /* Disable Full Field */
922 tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
924 /* Disable Line modes */
925 for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
926 tvp5150_write(c, i, 0xff);
928 break;
930 case VIDIOC_G_FMT:
932 struct v4l2_format *fmt;
933 struct v4l2_sliced_vbi_format *svbi;
935 int i, mask=0;
937 fmt = arg;
938 if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
939 return -EINVAL;
940 svbi = &fmt->fmt.sliced;
941 memset(svbi, 0, sizeof(*svbi));
943 for (i = 0; i <= 23; i++) {
944 svbi->service_lines[0][i]=tvp5150_get_vbi(c,
945 vbi_ram_default,i);
946 mask|=svbi->service_lines[0][i];
948 svbi->service_set=mask;
949 break;
952 #ifdef CONFIG_VIDEO_ADV_DEBUG
953 case VIDIOC_DBG_G_REGISTER:
954 case VIDIOC_DBG_S_REGISTER:
956 struct v4l2_register *reg = arg;
958 if (!v4l2_chip_match_i2c_client(c, reg->match_type, reg->match_chip))
959 return -EINVAL;
960 if (!capable(CAP_SYS_ADMIN))
961 return -EPERM;
962 if (cmd == VIDIOC_DBG_G_REGISTER)
963 reg->val = tvp5150_read(c, reg->reg & 0xff);
964 else
965 tvp5150_write(c, reg->reg & 0xff, reg->val & 0xff);
966 break;
968 #endif
970 case VIDIOC_LOG_STATUS:
971 dump_reg(c);
972 break;
974 case VIDIOC_G_TUNER:
976 struct v4l2_tuner *vt = arg;
977 int status = tvp5150_read(c, 0x88);
979 vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
980 break;
982 case VIDIOC_QUERYCTRL:
984 struct v4l2_queryctrl *qc = arg;
985 int i;
987 tvp5150_dbg(1, "VIDIOC_QUERYCTRL called\n");
989 for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
990 if (qc->id && qc->id == tvp5150_qctrl[i].id) {
991 memcpy(qc, &(tvp5150_qctrl[i]),
992 sizeof(*qc));
993 return 0;
996 return -EINVAL;
998 case VIDIOC_G_CTRL:
1000 struct v4l2_control *ctrl = arg;
1001 tvp5150_dbg(1, "VIDIOC_G_CTRL called\n");
1003 return tvp5150_get_ctrl(c, ctrl);
1005 case VIDIOC_S_CTRL:
1007 struct v4l2_control *ctrl = arg;
1008 u8 i, n;
1009 n = sizeof(tvp5150_qctrl) / sizeof(tvp5150_qctrl[0]);
1010 for (i = 0; i < n; i++)
1011 if (ctrl->id == tvp5150_qctrl[i].id) {
1012 if (ctrl->value <
1013 tvp5150_qctrl[i].minimum
1014 || ctrl->value >
1015 tvp5150_qctrl[i].maximum)
1016 return -ERANGE;
1017 tvp5150_dbg(1,
1018 "VIDIOC_S_CTRL: id=%d, value=%d\n",
1019 ctrl->id, ctrl->value);
1020 return tvp5150_set_ctrl(c, ctrl);
1022 return -EINVAL;
1025 default:
1026 return -EINVAL;
1029 return 0;
1032 /****************************************************************************
1033 I2C Client & Driver
1034 ****************************************************************************/
1035 static struct i2c_driver driver;
1037 static struct i2c_client client_template = {
1038 .name = "(unset)",
1039 .driver = &driver,
1042 static int tvp5150_detect_client(struct i2c_adapter *adapter,
1043 int address, int kind)
1045 struct i2c_client *c;
1046 struct tvp5150 *core;
1047 int rv;
1049 if (debug)
1050 printk( KERN_INFO
1051 "tvp5150.c: detecting tvp5150 client on address 0x%x\n",
1052 address << 1);
1054 client_template.adapter = adapter;
1055 client_template.addr = address;
1057 /* Check if the adapter supports the needed features */
1058 if (!i2c_check_functionality
1059 (adapter,
1060 I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1061 return 0;
1063 c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
1064 if (c == 0)
1065 return -ENOMEM;
1066 memcpy(c, &client_template, sizeof(struct i2c_client));
1068 core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
1069 if (core == 0) {
1070 kfree(c);
1071 return -ENOMEM;
1073 i2c_set_clientdata(c, core);
1075 rv = i2c_attach_client(c);
1077 core->norm = V4L2_STD_ALL; /* Default is autodetect */
1078 core->route.input = TVP5150_COMPOSITE1;
1079 core->enable = 1;
1080 core->bright = 32768;
1081 core->contrast = 32768;
1082 core->hue = 32768;
1083 core->sat = 32768;
1085 if (rv) {
1086 kfree(c);
1087 kfree(core);
1088 return rv;
1091 if (debug > 1)
1092 dump_reg(c);
1093 return 0;
1096 static int tvp5150_attach_adapter(struct i2c_adapter *adapter)
1098 if (debug)
1099 printk( KERN_INFO
1100 "tvp5150.c: starting probe for adapter %s (0x%x)\n",
1101 adapter->name, adapter->id);
1102 return i2c_probe(adapter, &addr_data, &tvp5150_detect_client);
1105 static int tvp5150_detach_client(struct i2c_client *c)
1107 struct tvp5150 *decoder = i2c_get_clientdata(c);
1108 int err;
1110 tvp5150_dbg(1,
1111 "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1112 c->addr << 1);
1114 err = i2c_detach_client(c);
1115 if (err) {
1116 return err;
1119 kfree(decoder);
1120 kfree(c);
1122 return 0;
1125 /* ----------------------------------------------------------------------- */
1127 static struct i2c_driver driver = {
1128 .driver = {
1129 .name = "tvp5150",
1131 .id = I2C_DRIVERID_TVP5150,
1133 .attach_adapter = tvp5150_attach_adapter,
1134 .detach_client = tvp5150_detach_client,
1136 .command = tvp5150_command,
1139 static int __init tvp5150_init(void)
1141 return i2c_add_driver(&driver);
1144 static void __exit tvp5150_exit(void)
1146 i2c_del_driver(&driver);
1149 module_init(tvp5150_init);
1150 module_exit(tvp5150_exit);