arch/blackfin/mach-bf548/boards/cm_bf548.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *           2008-2009 Bluetechnix
   4  *                2005 National ICT Australia (NICTA)
   5  *                      Aidan Williams <aidan@nicta.com.au>
   6  *
   7  * Licensed under the GPL-2 or later.
   8  */
   9
  10 #include <linux/device.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/mtd/physmap.h>
  15 #include <linux/spi/spi.h>
  16 #include <linux/spi/flash.h>
  17 #include <linux/irq.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <asm/bfin5xx_spi.h>
  21 #include <asm/dma.h>
  22 #include <asm/gpio.h>
  23 #include <asm/nand.h>
  24 #include <asm/portmux.h>
  25 #include <asm/bfin_sdh.h>
  26 #include <mach/bf54x_keys.h>
  27 #include <asm/dpmc.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/ad7877.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 const char bfin_board_name[] = "Bluetechnix CM-BF548";
  35
  36 /*
  37  *  Driver needs to know address, irq and flag pin.
  38  */
  39
  40 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
  41
  42 #include <mach/bf54x-lq043.h>
  43
  44 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
  45         .width =        480,
  46         .height =       272,
  47         .xres =         {480, 480, 480},
  48         .yres =         {272, 272, 272},
  49         .bpp =          {24, 24, 24},
  50         .disp =         GPIO_PE3,
  51 };
  52
  53 static struct resource bf54x_lq043_resources[] = {
  54         {
  55                 .start = IRQ_EPPI0_ERR,
  56                 .end = IRQ_EPPI0_ERR,
  57                 .flags = IORESOURCE_IRQ,
  58         },
  59 };
  60
  61 static struct platform_device bf54x_lq043_device = {
  62         .name           = "bf54x-lq043",
  63         .id             = -1,
  64         .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
  65         .resource       = bf54x_lq043_resources,
  66         .dev            = {
  67                 .platform_data = &bf54x_lq043_data,
  68         },
  69 };
  70 #endif
  71
  72 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
  73 static unsigned int bf548_keymap[] = {
  74         KEYVAL(0, 0, KEY_ENTER),
  75         KEYVAL(0, 1, KEY_HELP),
  76         KEYVAL(0, 2, KEY_0),
  77         KEYVAL(0, 3, KEY_BACKSPACE),
  78         KEYVAL(1, 0, KEY_TAB),
  79         KEYVAL(1, 1, KEY_9),
  80         KEYVAL(1, 2, KEY_8),
  81         KEYVAL(1, 3, KEY_7),
  82         KEYVAL(2, 0, KEY_DOWN),
  83         KEYVAL(2, 1, KEY_6),
  84         KEYVAL(2, 2, KEY_5),
  85         KEYVAL(2, 3, KEY_4),
  86         KEYVAL(3, 0, KEY_UP),
  87         KEYVAL(3, 1, KEY_3),
  88         KEYVAL(3, 2, KEY_2),
  89         KEYVAL(3, 3, KEY_1),
  90 };
  91
  92 static struct bfin_kpad_platform_data bf54x_kpad_data = {
  93         .rows                   = 4,
  94         .cols                   = 4,
  95         .keymap                 = bf548_keymap,
  96         .keymapsize             = ARRAY_SIZE(bf548_keymap),
  97         .repeat                 = 0,
  98         .debounce_time          = 5000, /* ns (5ms) */
  99         .coldrive_time          = 1000, /* ns (1ms) */
 100         .keyup_test_interval    = 50, /* ms (50ms) */
 101 };
 102
 103 static struct resource bf54x_kpad_resources[] = {
 104         {
 105                 .start = IRQ_KEY,
 106                 .end = IRQ_KEY,
 107                 .flags = IORESOURCE_IRQ,
 108         },
 109 };
 110
 111 static struct platform_device bf54x_kpad_device = {
 112         .name           = "bf54x-keys",
 113         .id             = -1,
 114         .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
 115         .resource       = bf54x_kpad_resources,
 116         .dev            = {
 117                 .platform_data = &bf54x_kpad_data,
 118         },
 119 };
 120 #endif
 121
 122 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 123 static struct platform_device rtc_device = {
 124         .name = "rtc-bfin",
 125         .id   = -1,
 126 };
 127 #endif
 128
 129 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 130 #ifdef CONFIG_SERIAL_BFIN_UART0
 131 static struct resource bfin_uart0_resources[] = {
 132         {
 133                 .start = UART0_DLL,
 134                 .end = UART0_RBR+2,
 135                 .flags = IORESOURCE_MEM,
 136         },
 137         {
 138                 .start = IRQ_UART0_RX,
 139                 .end = IRQ_UART0_RX+1,
 140                 .flags = IORESOURCE_IRQ,
 141         },
 142         {
 143                 .start = IRQ_UART0_ERROR,
 144                 .end = IRQ_UART0_ERROR,
 145                 .flags = IORESOURCE_IRQ,
 146         },
 147         {
 148                 .start = CH_UART0_TX,
 149                 .end = CH_UART0_TX,
 150                 .flags = IORESOURCE_DMA,
 151         },
 152         {
 153                 .start = CH_UART0_RX,
 154                 .end = CH_UART0_RX,
 155                 .flags = IORESOURCE_DMA,
 156         },
 157 };
 158
 159 unsigned short bfin_uart0_peripherals[] = {
 160         P_UART0_TX, P_UART0_RX, 0
 161 };
 162
 163 static struct platform_device bfin_uart0_device = {
 164         .name = "bfin-uart",
 165         .id = 0,
 166         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 167         .resource = bfin_uart0_resources,
 168         .dev = {
 169                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 170         },
 171 };
 172 #endif
 173 #ifdef CONFIG_SERIAL_BFIN_UART1
 174 static struct resource bfin_uart1_resources[] = {
 175         {
 176                 .start = UART1_DLL,
 177                 .end = UART1_RBR+2,
 178                 .flags = IORESOURCE_MEM,
 179         },
 180         {
 181                 .start = IRQ_UART1_RX,
 182                 .end = IRQ_UART1_RX+1,
 183                 .flags = IORESOURCE_IRQ,
 184         },
 185         {
 186                 .start = IRQ_UART1_ERROR,
 187                 .end = IRQ_UART1_ERROR,
 188                 .flags = IORESOURCE_IRQ,
 189         },
 190         {
 191                 .start = CH_UART1_TX,
 192                 .end = CH_UART1_TX,
 193                 .flags = IORESOURCE_DMA,
 194         },
 195         {
 196                 .start = CH_UART1_RX,
 197                 .end = CH_UART1_RX,
 198                 .flags = IORESOURCE_DMA,
 199         },
 200 #ifdef CONFIG_BFIN_UART1_CTSRTS
 201         {       /* CTS pin -- 0 means not supported */
 202                 .start = GPIO_PE10,
 203                 .end = GPIO_PE10,
 204                 .flags = IORESOURCE_IO,
 205         },
 206         {       /* RTS pin -- 0 means not supported */
 207                 .start = GPIO_PE9,
 208                 .end = GPIO_PE9,
 209                 .flags = IORESOURCE_IO,
 210         },
 211 #endif
 212 };
 213
 214 unsigned short bfin_uart1_peripherals[] = {
 215         P_UART1_TX, P_UART1_RX,
 216 #ifdef CONFIG_BFIN_UART1_CTSRTS
 217         P_UART1_RTS, P_UART1_CTS,
 218 #endif
 219         0
 220 };
 221
 222 static struct platform_device bfin_uart1_device = {
 223         .name = "bfin-uart",
 224         .id = 1,
 225         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 226         .resource = bfin_uart1_resources,
 227         .dev = {
 228                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 229         },
 230 };
 231 #endif
 232 #ifdef CONFIG_SERIAL_BFIN_UART2
 233 static struct resource bfin_uart2_resources[] = {
 234         {
 235                 .start = UART2_DLL,
 236                 .end = UART2_RBR+2,
 237                 .flags = IORESOURCE_MEM,
 238         },
 239         {
 240                 .start = IRQ_UART2_RX,
 241                 .end = IRQ_UART2_RX+1,
 242                 .flags = IORESOURCE_IRQ,
 243         },
 244         {
 245                 .start = IRQ_UART2_ERROR,
 246                 .end = IRQ_UART2_ERROR,
 247                 .flags = IORESOURCE_IRQ,
 248         },
 249         {
 250                 .start = CH_UART2_TX,
 251                 .end = CH_UART2_TX,
 252                 .flags = IORESOURCE_DMA,
 253         },
 254         {
 255                 .start = CH_UART2_RX,
 256                 .end = CH_UART2_RX,
 257                 .flags = IORESOURCE_DMA,
 258         },
 259 };
 260
 261 unsigned short bfin_uart2_peripherals[] = {
 262         P_UART2_TX, P_UART2_RX, 0
 263 };
 264
 265 static struct platform_device bfin_uart2_device = {
 266         .name = "bfin-uart",
 267         .id = 2,
 268         .num_resources = ARRAY_SIZE(bfin_uart2_resources),
 269         .resource = bfin_uart2_resources,
 270         .dev = {
 271                 .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 272         },
 273 };
 274 #endif
 275 #ifdef CONFIG_SERIAL_BFIN_UART3
 276 static struct resource bfin_uart3_resources[] = {
 277         {
 278                 .start = UART3_DLL,
 279                 .end = UART3_RBR+2,
 280                 .flags = IORESOURCE_MEM,
 281         },
 282         {
 283                 .start = IRQ_UART3_RX,
 284                 .end = IRQ_UART3_RX+1,
 285                 .flags = IORESOURCE_IRQ,
 286         },
 287         {
 288                 .start = IRQ_UART3_ERROR,
 289                 .end = IRQ_UART3_ERROR,
 290                 .flags = IORESOURCE_IRQ,
 291         },
 292         {
 293                 .start = CH_UART3_TX,
 294                 .end = CH_UART3_TX,
 295                 .flags = IORESOURCE_DMA,
 296         },
 297         {
 298                 .start = CH_UART3_RX,
 299                 .end = CH_UART3_RX,
 300                 .flags = IORESOURCE_DMA,
 301         },
 302 #ifdef CONFIG_BFIN_UART3_CTSRTS
 303         {       /* CTS pin -- 0 means not supported */
 304                 .start = GPIO_PB3,
 305                 .end = GPIO_PB3,
 306                 .flags = IORESOURCE_IO,
 307         },
 308         {       /* RTS pin -- 0 means not supported */
 309                 .start = GPIO_PB2,
 310                 .end = GPIO_PB2,
 311                 .flags = IORESOURCE_IO,
 312         },
 313 #endif
 314 };
 315
 316 unsigned short bfin_uart3_peripherals[] = {
 317         P_UART3_TX, P_UART3_RX,
 318 #ifdef CONFIG_BFIN_UART3_CTSRTS
 319         P_UART3_RTS, P_UART3_CTS,
 320 #endif
 321         0
 322 };
 323
 324 static struct platform_device bfin_uart3_device = {
 325         .name = "bfin-uart",
 326         .id = 3,
 327         .num_resources = ARRAY_SIZE(bfin_uart3_resources),
 328         .resource = bfin_uart3_resources,
 329         .dev = {
 330                 .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
 331         },
 332 };
 333 #endif
 334 #endif
 335
 336 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 337 #ifdef CONFIG_BFIN_SIR0
 338 static struct resource bfin_sir0_resources[] = {
 339         {
 340                 .start = 0xFFC00400,
 341                 .end = 0xFFC004FF,
 342                 .flags = IORESOURCE_MEM,
 343         },
 344         {
 345                 .start = IRQ_UART0_RX,
 346                 .end = IRQ_UART0_RX+1,
 347                 .flags = IORESOURCE_IRQ,
 348         },
 349         {
 350                 .start = CH_UART0_RX,
 351                 .end = CH_UART0_RX+1,
 352                 .flags = IORESOURCE_DMA,
 353         },
 354 };
 355 static struct platform_device bfin_sir0_device = {
 356         .name = "bfin_sir",
 357         .id = 0,
 358         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 359         .resource = bfin_sir0_resources,
 360 };
 361 #endif
 362 #ifdef CONFIG_BFIN_SIR1
 363 static struct resource bfin_sir1_resources[] = {
 364         {
 365                 .start = 0xFFC02000,
 366                 .end = 0xFFC020FF,
 367                 .flags = IORESOURCE_MEM,
 368         },
 369         {
 370                 .start = IRQ_UART1_RX,
 371                 .end = IRQ_UART1_RX+1,
 372                 .flags = IORESOURCE_IRQ,
 373         },
 374         {
 375                 .start = CH_UART1_RX,
 376                 .end = CH_UART1_RX+1,
 377                 .flags = IORESOURCE_DMA,
 378         },
 379 };
 380 static struct platform_device bfin_sir1_device = {
 381         .name = "bfin_sir",
 382         .id = 1,
 383         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 384         .resource = bfin_sir1_resources,
 385 };
 386 #endif
 387 #ifdef CONFIG_BFIN_SIR2
 388 static struct resource bfin_sir2_resources[] = {
 389         {
 390                 .start = 0xFFC02100,
 391                 .end = 0xFFC021FF,
 392                 .flags = IORESOURCE_MEM,
 393         },
 394         {
 395                 .start = IRQ_UART2_RX,
 396                 .end = IRQ_UART2_RX+1,
 397                 .flags = IORESOURCE_IRQ,
 398         },
 399         {
 400                 .start = CH_UART2_RX,
 401                 .end = CH_UART2_RX+1,
 402                 .flags = IORESOURCE_DMA,
 403         },
 404 };
 405 static struct platform_device bfin_sir2_device = {
 406         .name = "bfin_sir",
 407         .id = 2,
 408         .num_resources = ARRAY_SIZE(bfin_sir2_resources),
 409         .resource = bfin_sir2_resources,
 410 };
 411 #endif
 412 #ifdef CONFIG_BFIN_SIR3
 413 static struct resource bfin_sir3_resources[] = {
 414         {
 415                 .start = 0xFFC03100,
 416                 .end = 0xFFC031FF,
 417                 .flags = IORESOURCE_MEM,
 418         },
 419         {
 420                 .start = IRQ_UART3_RX,
 421                 .end = IRQ_UART3_RX+1,
 422                 .flags = IORESOURCE_IRQ,
 423         },
 424         {
 425                 .start = CH_UART3_RX,
 426                 .end = CH_UART3_RX+1,
 427                 .flags = IORESOURCE_DMA,
 428         },
 429 };
 430 static struct platform_device bfin_sir3_device = {
 431         .name = "bfin_sir",
 432         .id = 3,
 433         .num_resources = ARRAY_SIZE(bfin_sir3_resources),
 434         .resource = bfin_sir3_resources,
 435 };
 436 #endif
 437 #endif
 438
 439 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 440 #include <linux/smsc911x.h>
 441
 442 static struct resource smsc911x_resources[] = {
 443         {
 444                 .name = "smsc911x-memory",
 445                 .start = 0x24000000,
 446                 .end = 0x24000000 + 0xFF,
 447                 .flags = IORESOURCE_MEM,
 448         },
 449         {
 450                 .start = IRQ_PE6,
 451                 .end = IRQ_PE6,
 452                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 453         },
 454 };
 455
 456 static struct smsc911x_platform_config smsc911x_config = {
 457         .flags = SMSC911X_USE_16BIT,
 458         .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 459         .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 460         .phy_interface = PHY_INTERFACE_MODE_MII,
 461 };
 462
 463 static struct platform_device smsc911x_device = {
 464         .name = "smsc911x",
 465         .id = 0,
 466         .num_resources = ARRAY_SIZE(smsc911x_resources),
 467         .resource = smsc911x_resources,
 468         .dev = {
 469                 .platform_data = &smsc911x_config,
 470         },
 471 };
 472 #endif
 473
 474 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 475 static struct resource musb_resources[] = {
 476         [0] = {
 477                 .start  = 0xFFC03C00,
 478                 .end    = 0xFFC040FF,
 479                 .flags  = IORESOURCE_MEM,
 480         },
 481         [1] = { /* general IRQ */
 482                 .start  = IRQ_USB_INT0,
 483                 .end    = IRQ_USB_INT0,
 484                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 485         },
 486         [2] = { /* DMA IRQ */
 487                 .start  = IRQ_USB_DMA,
 488                 .end    = IRQ_USB_DMA,
 489                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 490         },
 491 };
 492
 493 static struct musb_hdrc_config musb_config = {
 494         .multipoint     = 0,
 495         .dyn_fifo       = 0,
 496         .soft_con       = 1,
 497         .dma            = 1,
 498         .num_eps        = 8,
 499         .dma_channels   = 8,
 500         .gpio_vrsel     = GPIO_PH6,
 501         /* Some custom boards need to be active low, just set it to "0"
 502          * if it is the case.
 503          */
 504         .gpio_vrsel_active      = 1,
 505 };
 506
 507 static struct musb_hdrc_platform_data musb_plat = {
 508 #if defined(CONFIG_USB_MUSB_OTG)
 509         .mode           = MUSB_OTG,
 510 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 511         .mode           = MUSB_HOST,
 512 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 513         .mode           = MUSB_PERIPHERAL,
 514 #endif
 515         .config         = &musb_config,
 516 };
 517
 518 static u64 musb_dmamask = ~(u32)0;
 519
 520 static struct platform_device musb_device = {
 521         .name           = "musb_hdrc",
 522         .id             = 0,
 523         .dev = {
 524                 .dma_mask               = &musb_dmamask,
 525                 .coherent_dma_mask      = 0xffffffff,
 526                 .platform_data          = &musb_plat,
 527         },
 528         .num_resources  = ARRAY_SIZE(musb_resources),
 529         .resource       = musb_resources,
 530 };
 531 #endif
 532
 533 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 534 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 535 static struct resource bfin_sport0_uart_resources[] = {
 536         {
 537                 .start = SPORT0_TCR1,
 538                 .end = SPORT0_MRCS3+4,
 539                 .flags = IORESOURCE_MEM,
 540         },
 541         {
 542                 .start = IRQ_SPORT0_RX,
 543                 .end = IRQ_SPORT0_RX+1,
 544                 .flags = IORESOURCE_IRQ,
 545         },
 546         {
 547                 .start = IRQ_SPORT0_ERROR,
 548                 .end = IRQ_SPORT0_ERROR,
 549                 .flags = IORESOURCE_IRQ,
 550         },
 551 };
 552
 553 unsigned short bfin_sport0_peripherals[] = {
 554         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 555         P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
 556 };
 557
 558 static struct platform_device bfin_sport0_uart_device = {
 559         .name = "bfin-sport-uart",
 560         .id = 0,
 561         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 562         .resource = bfin_sport0_uart_resources,
 563         .dev = {
 564                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 565         },
 566 };
 567 #endif
 568 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 569 static struct resource bfin_sport1_uart_resources[] = {
 570         {
 571                 .start = SPORT1_TCR1,
 572                 .end = SPORT1_MRCS3+4,
 573                 .flags = IORESOURCE_MEM,
 574         },
 575         {
 576                 .start = IRQ_SPORT1_RX,
 577                 .end = IRQ_SPORT1_RX+1,
 578                 .flags = IORESOURCE_IRQ,
 579         },
 580         {
 581                 .start = IRQ_SPORT1_ERROR,
 582                 .end = IRQ_SPORT1_ERROR,
 583                 .flags = IORESOURCE_IRQ,
 584         },
 585 };
 586
 587 unsigned short bfin_sport1_peripherals[] = {
 588         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 589         P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 590 };
 591
 592 static struct platform_device bfin_sport1_uart_device = {
 593         .name = "bfin-sport-uart",
 594         .id = 1,
 595         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 596         .resource = bfin_sport1_uart_resources,
 597         .dev = {
 598                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 599         },
 600 };
 601 #endif
 602 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 603 static struct resource bfin_sport2_uart_resources[] = {
 604         {
 605                 .start = SPORT2_TCR1,
 606                 .end = SPORT2_MRCS3+4,
 607                 .flags = IORESOURCE_MEM,
 608         },
 609         {
 610                 .start = IRQ_SPORT2_RX,
 611                 .end = IRQ_SPORT2_RX+1,
 612                 .flags = IORESOURCE_IRQ,
 613         },
 614         {
 615                 .start = IRQ_SPORT2_ERROR,
 616                 .end = IRQ_SPORT2_ERROR,
 617                 .flags = IORESOURCE_IRQ,
 618         },
 619 };
 620
 621 unsigned short bfin_sport2_peripherals[] = {
 622         P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
 623         P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
 624 };
 625
 626 static struct platform_device bfin_sport2_uart_device = {
 627         .name = "bfin-sport-uart",
 628         .id = 2,
 629         .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
 630         .resource = bfin_sport2_uart_resources,
 631         .dev = {
 632                 .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 633         },
 634 };
 635 #endif
 636 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 637 static struct resource bfin_sport3_uart_resources[] = {
 638         {
 639                 .start = SPORT3_TCR1,
 640                 .end = SPORT3_MRCS3+4,
 641                 .flags = IORESOURCE_MEM,
 642         },
 643         {
 644                 .start = IRQ_SPORT3_RX,
 645                 .end = IRQ_SPORT3_RX+1,
 646                 .flags = IORESOURCE_IRQ,
 647         },
 648         {
 649                 .start = IRQ_SPORT3_ERROR,
 650                 .end = IRQ_SPORT3_ERROR,
 651                 .flags = IORESOURCE_IRQ,
 652         },
 653 };
 654
 655 unsigned short bfin_sport3_peripherals[] = {
 656         P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
 657         P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
 658 };
 659
 660 static struct platform_device bfin_sport3_uart_device = {
 661         .name = "bfin-sport-uart",
 662         .id = 3,
 663         .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
 664         .resource = bfin_sport3_uart_resources,
 665         .dev = {
 666                 .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 667         },
 668 };
 669 #endif
 670 #endif
 671
 672 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 673 static struct resource bfin_atapi_resources[] = {
 674         {
 675                 .start = 0xFFC03800,
 676                 .end = 0xFFC0386F,
 677                 .flags = IORESOURCE_MEM,
 678         },
 679         {
 680                 .start = IRQ_ATAPI_ERR,
 681                 .end = IRQ_ATAPI_ERR,
 682                 .flags = IORESOURCE_IRQ,
 683         },
 684 };
 685
 686 static struct platform_device bfin_atapi_device = {
 687         .name = "pata-bf54x",
 688         .id = -1,
 689         .num_resources = ARRAY_SIZE(bfin_atapi_resources),
 690         .resource = bfin_atapi_resources,
 691 };
 692 #endif
 693
 694 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 695 static struct mtd_partition partition_info[] = {
 696         {
 697                 .name = "linux kernel(nand)",
 698                 .offset = 0,
 699                 .size = 4 * 1024 * 1024,
 700         },
 701         {
 702                 .name = "file system(nand)",
 703                 .offset = 4 * 1024 * 1024,
 704                 .size = (256 - 4) * 1024 * 1024,
 705         },
 706 };
 707
 708 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 709         .data_width = NFC_NWIDTH_8,
 710         .partitions = partition_info,
 711         .nr_partitions = ARRAY_SIZE(partition_info),
 712         .rd_dly = 3,
 713         .wr_dly = 3,
 714 };
 715
 716 static struct resource bf5xx_nand_resources[] = {
 717         {
 718                 .start = 0xFFC03B00,
 719                 .end = 0xFFC03B4F,
 720                 .flags = IORESOURCE_MEM,
 721         },
 722         {
 723                 .start = CH_NFC,
 724                 .end = CH_NFC,
 725                 .flags = IORESOURCE_IRQ,
 726         },
 727 };
 728
 729 static struct platform_device bf5xx_nand_device = {
 730         .name = "bf5xx-nand",
 731         .id = 0,
 732         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 733         .resource = bf5xx_nand_resources,
 734         .dev = {
 735                 .platform_data = &bf5xx_nand_platform,
 736         },
 737 };
 738 #endif
 739
 740 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 741 static struct bfin_sd_host bfin_sdh_data = {
 742         .dma_chan = CH_SDH,
 743         .irq_int0 = IRQ_SDH_MASK0,
 744         .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
 745 };
 746
 747 static struct platform_device bf54x_sdh_device = {
 748         .name = "bfin-sdh",
 749         .id = 0,
 750         .dev = {
 751                 .platform_data = &bfin_sdh_data,
 752         },
 753 };
 754 #endif
 755
 756 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 757 unsigned short bfin_can_peripherals[] = {
 758         P_CAN0_RX, P_CAN0_TX, 0
 759 };
 760
 761 static struct resource bfin_can_resources[] = {
 762         {
 763                 .start = 0xFFC02A00,
 764                 .end = 0xFFC02FFF,
 765                 .flags = IORESOURCE_MEM,
 766         },
 767         {
 768                 .start = IRQ_CAN0_RX,
 769                 .end = IRQ_CAN0_RX,
 770                 .flags = IORESOURCE_IRQ,
 771         },
 772         {
 773                 .start = IRQ_CAN0_TX,
 774                 .end = IRQ_CAN0_TX,
 775                 .flags = IORESOURCE_IRQ,
 776         },
 777         {
 778                 .start = IRQ_CAN0_ERROR,
 779                 .end = IRQ_CAN0_ERROR,
 780                 .flags = IORESOURCE_IRQ,
 781         },
 782 };
 783
 784 static struct platform_device bfin_can_device = {
 785         .name = "bfin_can",
 786         .num_resources = ARRAY_SIZE(bfin_can_resources),
 787         .resource = bfin_can_resources,
 788         .dev = {
 789                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 790         },
 791 };
 792 #endif
 793
 794 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 795 static struct mtd_partition para_partitions[] = {
 796         {
 797                 .name       = "bootloader(nor)",
 798                 .size       = 0x40000,
 799                 .offset     = 0,
 800         }, {
 801                 .name       = "linux kernel(nor)",
 802                 .size       = 0x100000,
 803                 .offset     = MTDPART_OFS_APPEND,
 804         }, {
 805                 .name       = "file system(nor)",
 806                 .size       = MTDPART_SIZ_FULL,
 807                 .offset     = MTDPART_OFS_APPEND,
 808         }
 809 };
 810
 811 static struct physmap_flash_data para_flash_data = {
 812         .width      = 2,
 813         .parts      = para_partitions,
 814         .nr_parts   = ARRAY_SIZE(para_partitions),
 815 };
 816
 817 static struct resource para_flash_resource = {
 818         .start = 0x20000000,
 819         .end   = 0x207fffff,
 820         .flags = IORESOURCE_MEM,
 821 };
 822
 823 static struct platform_device para_flash_device = {
 824         .name          = "physmap-flash",
 825         .id            = 0,
 826         .dev = {
 827                 .platform_data = &para_flash_data,
 828         },
 829         .num_resources = 1,
 830         .resource      = &para_flash_resource,
 831 };
 832 #endif
 833
 834 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 835 /* all SPI peripherals info goes here */
 836 #if defined(CONFIG_MTD_M25P80) \
 837         || defined(CONFIG_MTD_M25P80_MODULE)
 838 /* SPI flash chip (m25p16) */
 839 static struct mtd_partition bfin_spi_flash_partitions[] = {
 840         {
 841                 .name = "bootloader(spi)",
 842                 .size = 0x00040000,
 843                 .offset = 0,
 844                 .mask_flags = MTD_CAP_ROM
 845         }, {
 846                 .name = "linux kernel(spi)",
 847                 .size = 0x1c0000,
 848                 .offset = 0x40000
 849         }
 850 };
 851
 852 static struct flash_platform_data bfin_spi_flash_data = {
 853         .name = "m25p80",
 854         .parts = bfin_spi_flash_partitions,
 855         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 856         .type = "m25p16",
 857 };
 858
 859 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 860         .enable_dma = 0,         /* use dma transfer with this chip*/
 861         .bits_per_word = 8,
 862 };
 863 #endif
 864
 865 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 866 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 867         .enable_dma = 0,
 868         .bits_per_word = 16,
 869 };
 870
 871 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 872         .model                  = 7877,
 873         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 874         .x_plate_ohms           = 419,
 875         .y_plate_ohms           = 486,
 876         .pressure_max           = 1000,
 877         .pressure_min           = 0,
 878         .stopacq_polarity       = 1,
 879         .first_conversion_delay = 3,
 880         .acquisition_time       = 1,
 881         .averaging              = 1,
 882         .pen_down_acc_interval  = 1,
 883 };
 884 #endif
 885
 886 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 887 static struct bfin5xx_spi_chip spidev_chip_info = {
 888         .enable_dma = 0,
 889         .bits_per_word = 8,
 890 };
 891 #endif
 892
 893 static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 894 #if defined(CONFIG_MTD_M25P80) \
 895         || defined(CONFIG_MTD_M25P80_MODULE)
 896         {
 897                 /* the modalias must be the same as spi device driver name */
 898                 .modalias = "m25p80", /* Name of spi_driver for this device */
 899                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 900                 .bus_num = 0, /* Framework bus number */
 901                 .chip_select = 1, /* SPI_SSEL1*/
 902                 .platform_data = &bfin_spi_flash_data,
 903                 .controller_data = &spi_flash_chip_info,
 904                 .mode = SPI_MODE_3,
 905         },
 906 #endif
 907 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 908 {
 909         .modalias               = "ad7877",
 910         .platform_data          = &bfin_ad7877_ts_info,
 911         .irq                    = IRQ_PJ11,
 912         .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
 913         .bus_num                = 0,
 914         .chip_select            = 2,
 915         .controller_data = &spi_ad7877_chip_info,
 916 },
 917 #endif
 918 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 919         {
 920                 .modalias = "spidev",
 921                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 922                 .bus_num = 0,
 923                 .chip_select = 1,
 924                 .controller_data = &spidev_chip_info,
 925         },
 926 #endif
 927 };
 928
 929 /* SPI (0) */
 930 static struct resource bfin_spi0_resource[] = {
 931         [0] = {
 932                 .start = SPI0_REGBASE,
 933                 .end   = SPI0_REGBASE + 0xFF,
 934                 .flags = IORESOURCE_MEM,
 935         },
 936         [1] = {
 937                 .start = CH_SPI0,
 938                 .end   = CH_SPI0,
 939                 .flags = IORESOURCE_DMA,
 940         },
 941         [2] = {
 942                 .start = IRQ_SPI0,
 943                 .end   = IRQ_SPI0,
 944                 .flags = IORESOURCE_IRQ,
 945         }
 946 };
 947
 948 /* SPI (1) */
 949 static struct resource bfin_spi1_resource[] = {
 950         [0] = {
 951                 .start = SPI1_REGBASE,
 952                 .end   = SPI1_REGBASE + 0xFF,
 953                 .flags = IORESOURCE_MEM,
 954         },
 955         [1] = {
 956                 .start = CH_SPI1,
 957                 .end   = CH_SPI1,
 958                 .flags = IORESOURCE_DMA,
 959         },
 960         [2] = {
 961                 .start = IRQ_SPI1,
 962                 .end   = IRQ_SPI1,
 963                 .flags = IORESOURCE_IRQ,
 964         }
 965 };
 966
 967 /* SPI controller data */
 968 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
 969         .num_chipselect = 4,
 970         .enable_dma = 1,  /* master has the ability to do dma transfer */
 971         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 972 };
 973
 974 static struct platform_device bf54x_spi_master0 = {
 975         .name = "bfin-spi",
 976         .id = 0, /* Bus number */
 977         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 978         .resource = bfin_spi0_resource,
 979         .dev = {
 980                 .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
 981                 },
 982 };
 983
 984 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
 985         .num_chipselect = 4,
 986         .enable_dma = 1,  /* master has the ability to do dma transfer */
 987         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 988 };
 989
 990 static struct platform_device bf54x_spi_master1 = {
 991         .name = "bfin-spi",
 992         .id = 1, /* Bus number */
 993         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 994         .resource = bfin_spi1_resource,
 995         .dev = {
 996                 .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
 997                 },
 998 };
 999 #endif  /* spi master and devices */
1000
1001 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1002 static struct resource bfin_twi0_resource[] = {
1003         [0] = {
1004                 .start = TWI0_REGBASE,
1005                 .end   = TWI0_REGBASE + 0xFF,
1006                 .flags = IORESOURCE_MEM,
1007         },
1008         [1] = {
1009                 .start = IRQ_TWI0,
1010                 .end   = IRQ_TWI0,
1011                 .flags = IORESOURCE_IRQ,
1012         },
1013 };
1014
1015 static struct platform_device i2c_bfin_twi0_device = {
1016         .name = "i2c-bfin-twi",
1017         .id = 0,
1018         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1019         .resource = bfin_twi0_resource,
1020 };
1021
1022 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
1023 static struct resource bfin_twi1_resource[] = {
1024         [0] = {
1025                 .start = TWI1_REGBASE,
1026                 .end   = TWI1_REGBASE + 0xFF,
1027                 .flags = IORESOURCE_MEM,
1028         },
1029         [1] = {
1030                 .start = IRQ_TWI1,
1031                 .end   = IRQ_TWI1,
1032                 .flags = IORESOURCE_IRQ,
1033         },
1034 };
1035
1036 static struct platform_device i2c_bfin_twi1_device = {
1037         .name = "i2c-bfin-twi",
1038         .id = 1,
1039         .num_resources = ARRAY_SIZE(bfin_twi1_resource),
1040         .resource = bfin_twi1_resource,
1041 };
1042 #endif
1043 #endif
1044
1045 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1046 #include <linux/gpio_keys.h>
1047
1048 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1049         {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
1050 };
1051
1052 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1053         .buttons        = bfin_gpio_keys_table,
1054         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1055 };
1056
1057 static struct platform_device bfin_device_gpiokeys = {
1058         .name      = "gpio-keys",
1059         .dev = {
1060                 .platform_data = &bfin_gpio_keys_data,
1061         },
1062 };
1063 #endif
1064
1065 static const unsigned int cclk_vlev_datasheet[] =
1066 {
1067 /*
1068  * Internal VLEV BF54XSBBC1533
1069  ****temporarily using these values until data sheet is updated
1070  */
1071         VRPAIR(VLEV_085, 150000000),
1072         VRPAIR(VLEV_090, 250000000),
1073         VRPAIR(VLEV_110, 276000000),
1074         VRPAIR(VLEV_115, 301000000),
1075         VRPAIR(VLEV_120, 525000000),
1076         VRPAIR(VLEV_125, 550000000),
1077         VRPAIR(VLEV_130, 600000000),
1078 };
1079
1080 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1081         .tuple_tab = cclk_vlev_datasheet,
1082         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1083         .vr_settling_time = 25 /* us */,
1084 };
1085
1086 static struct platform_device bfin_dpmc = {
1087         .name = "bfin dpmc",
1088         .dev = {
1089                 .platform_data = &bfin_dmpc_vreg_data,
1090         },
1091 };
1092
1093 static struct platform_device *cm_bf548_devices[] __initdata = {
1094
1095         &bfin_dpmc,
1096
1097 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1098         &rtc_device,
1099 #endif
1100
1101 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1102 #ifdef CONFIG_SERIAL_BFIN_UART0
1103         &bfin_uart0_device,
1104 #endif
1105 #ifdef CONFIG_SERIAL_BFIN_UART1
1106         &bfin_uart1_device,
1107 #endif
1108 #ifdef CONFIG_SERIAL_BFIN_UART2
1109         &bfin_uart2_device,
1110 #endif
1111 #ifdef CONFIG_SERIAL_BFIN_UART3
1112         &bfin_uart3_device,
1113 #endif
1114 #endif
1115
1116 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1117 #ifdef CONFIG_BFIN_SIR0
1118         &bfin_sir0_device,
1119 #endif
1120 #ifdef CONFIG_BFIN_SIR1
1121         &bfin_sir1_device,
1122 #endif
1123 #ifdef CONFIG_BFIN_SIR2
1124         &bfin_sir2_device,
1125 #endif
1126 #ifdef CONFIG_BFIN_SIR3
1127         &bfin_sir3_device,
1128 #endif
1129 #endif
1130
1131 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
1132         &bf54x_lq043_device,
1133 #endif
1134
1135 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
1136         &smsc911x_device,
1137 #endif
1138
1139 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1140         &musb_device,
1141 #endif
1142
1143 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1144 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1145         &bfin_sport0_uart_device,
1146 #endif
1147 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1148         &bfin_sport1_uart_device,
1149 #endif
1150 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1151         &bfin_sport2_uart_device,
1152 #endif
1153 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1154         &bfin_sport3_uart_device,
1155 #endif
1156 #endif
1157
1158 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
1159         &bfin_atapi_device,
1160 #endif
1161
1162 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1163         &bf5xx_nand_device,
1164 #endif
1165
1166 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
1167         &bf54x_sdh_device,
1168 #endif
1169
1170 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1171         &bf54x_spi_master0,
1172         &bf54x_spi_master1,
1173 #endif
1174
1175 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
1176         &bf54x_kpad_device,
1177 #endif
1178
1179 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1180         &i2c_bfin_twi0_device,
1181 #if !defined(CONFIG_BF542)
1182         &i2c_bfin_twi1_device,
1183 #endif
1184 #endif
1185
1186 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1187         &bfin_device_gpiokeys,
1188 #endif
1189
1190 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1191         &para_flash_device,
1192 #endif
1193
1194 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
1195         &bfin_can_device,
1196 #endif
1197
1198 };
1199
1200 static int __init cm_bf548_init(void)
1201 {
1202         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1203         platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
1204
1205 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1206         spi_register_board_info(bf54x_spi_board_info,
1207                         ARRAY_SIZE(bf54x_spi_board_info));
1208 #endif
1209
1210         return 0;
1211 }
1212
1213 arch_initcall(cm_bf548_init);
1214
1215 static struct platform_device *cm_bf548_early_devices[] __initdata = {
1216 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1217 #ifdef CONFIG_SERIAL_BFIN_UART0
1218         &bfin_uart0_device,
1219 #endif
1220 #ifdef CONFIG_SERIAL_BFIN_UART1
1221         &bfin_uart1_device,
1222 #endif
1223 #ifdef CONFIG_SERIAL_BFIN_UART2
1224         &bfin_uart2_device,
1225 #endif
1226 #ifdef CONFIG_SERIAL_BFIN_UART3
1227         &bfin_uart3_device,
1228 #endif
1229 #endif
1230
1231 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1232 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1233         &bfin_sport0_uart_device,
1234 #endif
1235 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1236         &bfin_sport1_uart_device,
1237 #endif
1238 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
1239         &bfin_sport2_uart_device,
1240 #endif
1241 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
1242         &bfin_sport3_uart_device,
1243 #endif
1244 #endif
1245 };
1246
1247 void __init native_machine_early_platform_add_devices(void)
1248 {
1249         printk(KERN_INFO "register early platform devices\n");
1250         early_platform_add_devices(cm_bf548_early_devices,
1251                 ARRAY_SIZE(cm_bf548_early_devices));
1252 }