1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 static struct pm_qos_request_list ipw2100_pm_qos_req
;
179 /* Debugging stuff */
180 #ifdef CONFIG_IPW2100_DEBUG
181 #define IPW2100_RX_DEBUG /* Reception debugging */
184 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
185 MODULE_VERSION(DRV_VERSION
);
186 MODULE_AUTHOR(DRV_COPYRIGHT
);
187 MODULE_LICENSE("GPL");
189 static int debug
= 0;
190 static int network_mode
= 0;
191 static int channel
= 0;
192 static int associate
= 0;
193 static int disable
= 0;
195 static struct ipw2100_fw ipw2100_firmware
;
198 #include <linux/moduleparam.h>
199 module_param(debug
, int, 0444);
200 module_param_named(mode
, network_mode
, int, 0444);
201 module_param(channel
, int, 0444);
202 module_param(associate
, int, 0444);
203 module_param(disable
, int, 0444);
205 MODULE_PARM_DESC(debug
, "debug level");
206 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
207 MODULE_PARM_DESC(channel
, "channel");
208 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
209 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
211 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
213 #ifdef CONFIG_IPW2100_DEBUG
214 #define IPW_DEBUG(level, message...) \
216 if (ipw2100_debug_level & (level)) { \
217 printk(KERN_DEBUG "ipw2100: %c %s ", \
218 in_interrupt() ? 'I' : 'U', __func__); \
223 #define IPW_DEBUG(level, message...) do {} while (0)
224 #endif /* CONFIG_IPW2100_DEBUG */
226 #ifdef CONFIG_IPW2100_DEBUG
227 static const char *command_types
[] = {
229 "unused", /* HOST_ATTENTION */
231 "unused", /* SLEEP */
232 "unused", /* HOST_POWER_DOWN */
235 "unused", /* SET_IMR */
238 "AUTHENTICATION_TYPE",
241 "INTERNATIONAL_MODE",
256 "CLEAR_ALL_MULTICAST",
277 "AP_OR_STATION_TABLE",
281 "unused", /* SAVE_CALIBRATION */
282 "unused", /* RESTORE_CALIBRATION */
286 "HOST_PRE_POWER_DOWN",
287 "unused", /* HOST_INTERRUPT_COALESCING */
289 "CARD_DISABLE_PHY_OFF",
290 "MSDU_TX_RATES" "undefined",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
301 #define WEXT_USECHANNELS 1
303 static const long ipw2100_frequencies
[] = {
304 2412, 2417, 2422, 2427,
305 2432, 2437, 2442, 2447,
306 2452, 2457, 2462, 2467,
310 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
312 static const long ipw2100_rates_11b
[] = {
319 static struct ieee80211_rate ipw2100_bg_rates
[] = {
321 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
322 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
323 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
326 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
328 /* Pre-decl until we get the code solid and then we can clean it up */
329 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
330 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
331 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
333 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
334 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
335 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
337 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
343 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
345 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
346 struct ipw2100_fw
*fw
);
347 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
348 struct ipw2100_fw
*fw
);
349 static void ipw2100_wx_event_work(struct work_struct
*work
);
350 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
351 static struct iw_handler_def ipw2100_wx_handler_def
;
353 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
355 *val
= readl((void __iomem
*)(dev
->base_addr
+ reg
));
356 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
359 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
361 writel(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
362 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
365 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
368 *val
= readw((void __iomem
*)(dev
->base_addr
+ reg
));
369 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
372 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
374 *val
= readb((void __iomem
*)(dev
->base_addr
+ reg
));
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 writew(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
381 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
384 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
386 writeb(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
387 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
390 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
392 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
393 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
394 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
397 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
399 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
400 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
401 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
404 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
406 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
407 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
408 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
411 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
413 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
414 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
415 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
418 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
420 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
421 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
422 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
425 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
427 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
428 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
429 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
432 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
434 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
435 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
438 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
440 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
443 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
451 /* read first nibble byte by byte */
452 aligned_addr
= addr
& (~0x3);
453 dif_len
= addr
- aligned_addr
;
455 /* Start reading at aligned_addr + dif_len */
456 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
458 for (i
= dif_len
; i
< 4; i
++, buf
++)
459 write_register_byte(dev
,
460 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
467 /* read DWs through autoincrement registers */
468 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
469 aligned_len
= len
& (~0x3);
470 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
471 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
473 /* copy the last nibble */
474 dif_len
= len
- aligned_len
;
475 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
476 for (i
= 0; i
< dif_len
; i
++, buf
++)
477 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
481 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
489 /* read first nibble byte by byte */
490 aligned_addr
= addr
& (~0x3);
491 dif_len
= addr
- aligned_addr
;
493 /* Start reading at aligned_addr + dif_len */
494 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
496 for (i
= dif_len
; i
< 4; i
++, buf
++)
497 read_register_byte(dev
,
498 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
505 /* read DWs through autoincrement registers */
506 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
507 aligned_len
= len
& (~0x3);
508 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
509 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
511 /* copy the last nibble */
512 dif_len
= len
- aligned_len
;
513 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
514 for (i
= 0; i
< dif_len
; i
++, buf
++)
515 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
518 static inline int ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
520 return (dev
->base_addr
&&
522 ((void __iomem
*)(dev
->base_addr
+
523 IPW_REG_DOA_DEBUG_AREA_START
))
524 == IPW_DATA_DOA_DEBUG_VALUE
));
527 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
528 void *val
, u32
* len
)
530 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
537 if (ordinals
->table1_addr
== 0) {
538 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
539 "before they have been loaded.\n");
543 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
544 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
545 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
547 printk(KERN_WARNING DRV_NAME
548 ": ordinal buffer length too small, need %zd\n",
549 IPW_ORD_TAB_1_ENTRY_SIZE
);
554 read_nic_dword(priv
->net_dev
,
555 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
556 read_nic_dword(priv
->net_dev
, addr
, val
);
558 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
563 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
565 ord
-= IPW_START_ORD_TAB_2
;
567 /* get the address of statistic */
568 read_nic_dword(priv
->net_dev
,
569 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
571 /* get the second DW of statistics ;
572 * two 16-bit words - first is length, second is count */
573 read_nic_dword(priv
->net_dev
,
574 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
577 /* get each entry length */
578 field_len
= *((u16
*) & field_info
);
580 /* get number of entries */
581 field_count
= *(((u16
*) & field_info
) + 1);
583 /* abort if no enough memory */
584 total_length
= field_len
* field_count
;
585 if (total_length
> *len
) {
594 /* read the ordinal data from the SRAM */
595 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
600 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
601 "in table 2\n", ord
);
606 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
609 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
612 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
613 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
614 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
615 IPW_DEBUG_INFO("wrong size\n");
619 read_nic_dword(priv
->net_dev
,
620 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
622 write_nic_dword(priv
->net_dev
, addr
, *val
);
624 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
629 IPW_DEBUG_INFO("wrong table\n");
630 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
636 static char *snprint_line(char *buf
, size_t count
,
637 const u8
* data
, u32 len
, u32 ofs
)
642 out
= snprintf(buf
, count
, "%08X", ofs
);
644 for (l
= 0, i
= 0; i
< 2; i
++) {
645 out
+= snprintf(buf
+ out
, count
- out
, " ");
646 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
647 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
650 out
+= snprintf(buf
+ out
, count
- out
, " ");
653 out
+= snprintf(buf
+ out
, count
- out
, " ");
654 for (l
= 0, i
= 0; i
< 2; i
++) {
655 out
+= snprintf(buf
+ out
, count
- out
, " ");
656 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
657 c
= data
[(i
* 8 + j
)];
658 if (!isascii(c
) || !isprint(c
))
661 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
665 out
+= snprintf(buf
+ out
, count
- out
, " ");
671 static void printk_buf(int level
, const u8
* data
, u32 len
)
675 if (!(ipw2100_debug_level
& level
))
679 printk(KERN_DEBUG
"%s\n",
680 snprint_line(line
, sizeof(line
), &data
[ofs
],
681 min(len
, 16U), ofs
));
683 len
-= min(len
, 16U);
687 #define MAX_RESET_BACKOFF 10
689 static void schedule_reset(struct ipw2100_priv
*priv
)
691 unsigned long now
= get_seconds();
693 /* If we haven't received a reset request within the backoff period,
694 * then we can reset the backoff interval so this reset occurs
696 if (priv
->reset_backoff
&&
697 (now
- priv
->last_reset
> priv
->reset_backoff
))
698 priv
->reset_backoff
= 0;
700 priv
->last_reset
= get_seconds();
702 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
703 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
704 priv
->net_dev
->name
, priv
->reset_backoff
);
705 netif_carrier_off(priv
->net_dev
);
706 netif_stop_queue(priv
->net_dev
);
707 priv
->status
|= STATUS_RESET_PENDING
;
708 if (priv
->reset_backoff
)
709 queue_delayed_work(priv
->workqueue
, &priv
->reset_work
,
710 priv
->reset_backoff
* HZ
);
712 queue_delayed_work(priv
->workqueue
, &priv
->reset_work
,
715 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
716 priv
->reset_backoff
++;
718 wake_up_interruptible(&priv
->wait_command_queue
);
720 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
721 priv
->net_dev
->name
);
725 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
726 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
727 struct host_command
*cmd
)
729 struct list_head
*element
;
730 struct ipw2100_tx_packet
*packet
;
734 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
735 command_types
[cmd
->host_command
], cmd
->host_command
,
736 cmd
->host_command_length
);
737 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
738 cmd
->host_command_length
);
740 spin_lock_irqsave(&priv
->low_lock
, flags
);
742 if (priv
->fatal_error
) {
744 ("Attempt to send command while hardware in fatal error condition.\n");
749 if (!(priv
->status
& STATUS_RUNNING
)) {
751 ("Attempt to send command while hardware is not running.\n");
756 if (priv
->status
& STATUS_CMD_ACTIVE
) {
758 ("Attempt to send command while another command is pending.\n");
763 if (list_empty(&priv
->msg_free_list
)) {
764 IPW_DEBUG_INFO("no available msg buffers\n");
768 priv
->status
|= STATUS_CMD_ACTIVE
;
769 priv
->messages_sent
++;
771 element
= priv
->msg_free_list
.next
;
773 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
774 packet
->jiffy_start
= jiffies
;
776 /* initialize the firmware command packet */
777 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
778 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
779 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
780 cmd
->host_command_length
;
781 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
783 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
784 cmd
->host_command_parameters
,
785 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
788 DEC_STAT(&priv
->msg_free_stat
);
790 list_add_tail(element
, &priv
->msg_pend_list
);
791 INC_STAT(&priv
->msg_pend_stat
);
793 ipw2100_tx_send_commands(priv
);
794 ipw2100_tx_send_data(priv
);
796 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
799 * We must wait for this command to complete before another
800 * command can be sent... but if we wait more than 3 seconds
801 * then there is a problem.
805 wait_event_interruptible_timeout(priv
->wait_command_queue
,
807 status
& STATUS_CMD_ACTIVE
),
808 HOST_COMPLETE_TIMEOUT
);
811 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
812 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
813 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
814 priv
->status
&= ~STATUS_CMD_ACTIVE
;
815 schedule_reset(priv
);
819 if (priv
->fatal_error
) {
820 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
821 priv
->net_dev
->name
);
825 /* !!!!! HACK TEST !!!!!
826 * When lots of debug trace statements are enabled, the driver
827 * doesn't seem to have as many firmware restart cycles...
829 * As a test, we're sticking in a 1/100s delay here */
830 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
835 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
841 * Verify the values and data access of the hardware
842 * No locks needed or used. No functions called.
844 static int ipw2100_verify(struct ipw2100_priv
*priv
)
849 u32 val1
= 0x76543210;
850 u32 val2
= 0xFEDCBA98;
852 /* Domain 0 check - all values should be DOA_DEBUG */
853 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
854 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
855 read_register(priv
->net_dev
, address
, &data1
);
856 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
860 /* Domain 1 check - use arbitrary read/write compare */
861 for (address
= 0; address
< 5; address
++) {
862 /* The memory area is not used now */
863 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
865 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
867 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
869 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
871 if (val1
== data1
&& val2
== data2
)
880 * Loop until the CARD_DISABLED bit is the same value as the
883 * TODO: See if it would be more efficient to do a wait/wake
884 * cycle and have the completion event trigger the wakeup
887 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
888 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
892 u32 len
= sizeof(card_state
);
895 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
896 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
899 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
904 /* We'll break out if either the HW state says it is
905 * in the state we want, or if HOST_COMPLETE command
907 if ((card_state
== state
) ||
908 ((priv
->status
& STATUS_ENABLED
) ?
909 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
910 if (state
== IPW_HW_STATE_ENABLED
)
911 priv
->status
|= STATUS_ENABLED
;
913 priv
->status
&= ~STATUS_ENABLED
;
921 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
922 state
? "DISABLED" : "ENABLED");
926 /*********************************************************************
927 Procedure : sw_reset_and_clock
928 Purpose : Asserts s/w reset, asserts clock initialization
929 and waits for clock stabilization
930 ********************************************************************/
931 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
937 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
938 IPW_AUX_HOST_RESET_REG_SW_RESET
);
940 // wait for clock stabilization
941 for (i
= 0; i
< 1000; i
++) {
942 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
944 // check clock ready bit
945 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
946 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
951 return -EIO
; // TODO: better error value
953 /* set "initialization complete" bit to move adapter to
955 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
956 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
958 /* wait for clock stabilization */
959 for (i
= 0; i
< 10000; i
++) {
960 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
962 /* check clock ready bit */
963 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
964 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
969 return -EIO
; /* TODO: better error value */
971 /* set D0 standby bit */
972 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
973 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
974 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
979 /*********************************************************************
980 Procedure : ipw2100_download_firmware
981 Purpose : Initiaze adapter after power on.
983 1. assert s/w reset first!
984 2. awake clocks & wait for clock stabilization
985 3. hold ARC (don't ask me why...)
986 4. load Dino ucode and reset/clock init again
987 5. zero-out shared mem
989 *******************************************************************/
990 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
996 /* Fetch the firmware and microcode */
997 struct ipw2100_fw ipw2100_firmware
;
1000 if (priv
->fatal_error
) {
1001 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1002 "fatal error %d. Interface must be brought down.\n",
1003 priv
->net_dev
->name
, priv
->fatal_error
);
1007 if (!ipw2100_firmware
.version
) {
1008 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1010 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1011 priv
->net_dev
->name
, err
);
1012 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1017 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1019 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1020 priv
->net_dev
->name
, err
);
1021 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1025 priv
->firmware_version
= ipw2100_firmware
.version
;
1027 /* s/w reset and clock stabilization */
1028 err
= sw_reset_and_clock(priv
);
1030 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1031 priv
->net_dev
->name
, err
);
1035 err
= ipw2100_verify(priv
);
1037 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1038 priv
->net_dev
->name
, err
);
1043 write_nic_dword(priv
->net_dev
,
1044 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1046 /* allow ARC to run */
1047 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1049 /* load microcode */
1050 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1052 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1053 priv
->net_dev
->name
, err
);
1058 write_nic_dword(priv
->net_dev
,
1059 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1061 /* s/w reset and clock stabilization (again!!!) */
1062 err
= sw_reset_and_clock(priv
);
1064 printk(KERN_ERR DRV_NAME
1065 ": %s: sw_reset_and_clock failed: %d\n",
1066 priv
->net_dev
->name
, err
);
1071 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1073 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1074 priv
->net_dev
->name
, err
);
1079 * When the .resume method of the driver is called, the other
1080 * part of the system, i.e. the ide driver could still stay in
1081 * the suspend stage. This prevents us from loading the firmware
1082 * from the disk. --YZ
1085 /* free any storage allocated for firmware image */
1086 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1089 /* zero out Domain 1 area indirectly (Si requirement) */
1090 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1091 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1092 write_nic_dword(priv
->net_dev
, address
, 0);
1093 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1094 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1097 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1100 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1103 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1109 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1113 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1115 if (priv
->status
& STATUS_INT_ENABLED
)
1117 priv
->status
|= STATUS_INT_ENABLED
;
1118 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1121 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1123 if (!(priv
->status
& STATUS_INT_ENABLED
))
1125 priv
->status
&= ~STATUS_INT_ENABLED
;
1126 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1129 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1131 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1133 IPW_DEBUG_INFO("enter\n");
1135 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1141 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1142 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1144 ord
->table2_size
&= 0x0000FFFF;
1146 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1147 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1148 IPW_DEBUG_INFO("exit\n");
1151 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1155 * Set GPIO 3 writable by FW; GPIO 1 writable
1156 * by driver and enable clock
1158 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1159 IPW_BIT_GPIO_LED_OFF
);
1160 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1163 static int rf_kill_active(struct ipw2100_priv
*priv
)
1165 #define MAX_RF_KILL_CHECKS 5
1166 #define RF_KILL_CHECK_DELAY 40
1168 unsigned short value
= 0;
1172 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1173 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1174 priv
->status
&= ~STATUS_RF_KILL_HW
;
1178 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1179 udelay(RF_KILL_CHECK_DELAY
);
1180 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1181 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1185 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1186 priv
->status
|= STATUS_RF_KILL_HW
;
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1189 priv
->status
&= ~STATUS_RF_KILL_HW
;
1192 return (value
== 0);
1195 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1201 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1204 if (ipw2100_get_ordinal
1205 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1206 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1211 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1214 * EEPROM version is the byte at offset 0xfd in firmware
1215 * We read 4 bytes, then shift out the byte we actually want */
1216 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1217 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1218 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1221 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1223 * notice that the EEPROM bit is reverse polarity, i.e.
1224 * bit = 0 signifies HW RF kill switch is supported
1225 * bit = 1 signifies HW RF kill switch is NOT supported
1227 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1228 if (!((val
>> 24) & 0x01))
1229 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1231 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1232 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1238 * Start firmware execution after power on and intialization
1241 * 2. Wait for f/w initialization completes;
1243 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1246 u32 inta
, inta_mask
, gpio
;
1248 IPW_DEBUG_INFO("enter\n");
1250 if (priv
->status
& STATUS_RUNNING
)
1254 * Initialize the hw - drive adapter to DO state by setting
1255 * init_done bit. Wait for clk_ready bit and Download
1258 if (ipw2100_download_firmware(priv
)) {
1259 printk(KERN_ERR DRV_NAME
1260 ": %s: Failed to power on the adapter.\n",
1261 priv
->net_dev
->name
);
1265 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1266 * in the firmware RBD and TBD ring queue */
1267 ipw2100_queues_initialize(priv
);
1269 ipw2100_hw_set_gpio(priv
);
1271 /* TODO -- Look at disabling interrupts here to make sure none
1272 * get fired during FW initialization */
1274 /* Release ARC - clear reset bit */
1275 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1277 /* wait for f/w intialization complete */
1278 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1281 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1282 /* Todo... wait for sync command ... */
1284 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1286 /* check "init done" bit */
1287 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1288 /* reset "init done" bit */
1289 write_register(priv
->net_dev
, IPW_REG_INTA
,
1290 IPW2100_INTA_FW_INIT_DONE
);
1294 /* check error conditions : we check these after the firmware
1295 * check so that if there is an error, the interrupt handler
1296 * will see it and the adapter will be reset */
1298 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1299 /* clear error conditions */
1300 write_register(priv
->net_dev
, IPW_REG_INTA
,
1301 IPW2100_INTA_FATAL_ERROR
|
1302 IPW2100_INTA_PARITY_ERROR
);
1306 /* Clear out any pending INTAs since we aren't supposed to have
1307 * interrupts enabled at this point... */
1308 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1309 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1310 inta
&= IPW_INTERRUPT_MASK
;
1311 /* Clear out any pending interrupts */
1312 if (inta
& inta_mask
)
1313 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1315 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1316 i
? "SUCCESS" : "FAILED");
1319 printk(KERN_WARNING DRV_NAME
1320 ": %s: Firmware did not initialize.\n",
1321 priv
->net_dev
->name
);
1325 /* allow firmware to write to GPIO1 & GPIO3 */
1326 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1328 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1330 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1332 /* Ready to receive commands */
1333 priv
->status
|= STATUS_RUNNING
;
1335 /* The adapter has been reset; we are not associated */
1336 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1338 IPW_DEBUG_INFO("exit\n");
1343 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1345 if (!priv
->fatal_error
)
1348 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1349 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1350 priv
->fatal_error
= 0;
1353 /* NOTE: Our interrupt is disabled when this method is called */
1354 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1359 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1361 ipw2100_hw_set_gpio(priv
);
1363 /* Step 1. Stop Master Assert */
1364 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1365 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1367 /* Step 2. Wait for stop Master Assert
1368 * (not more than 50us, otherwise ret error */
1371 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1372 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1374 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1378 priv
->status
&= ~STATUS_RESET_PENDING
;
1382 ("exit - waited too long for master assert stop\n");
1386 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1387 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1389 /* Reset any fatal_error conditions */
1390 ipw2100_reset_fatalerror(priv
);
1392 /* At this point, the adapter is now stopped and disabled */
1393 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1394 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1400 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1402 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1404 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1405 * if STATUS_ASSN_LOST is sent.
1407 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1410 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1412 struct host_command cmd
= {
1413 .host_command
= CARD_DISABLE_PHY_OFF
,
1414 .host_command_sequence
= 0,
1415 .host_command_length
= 0,
1420 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1422 /* Turn off the radio */
1423 err
= ipw2100_hw_send_command(priv
, &cmd
);
1427 for (i
= 0; i
< 2500; i
++) {
1428 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1429 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1431 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1432 (val2
& IPW2100_COMMAND_PHY_OFF
))
1435 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1441 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1443 struct host_command cmd
= {
1444 .host_command
= HOST_COMPLETE
,
1445 .host_command_sequence
= 0,
1446 .host_command_length
= 0
1450 IPW_DEBUG_HC("HOST_COMPLETE\n");
1452 if (priv
->status
& STATUS_ENABLED
)
1455 mutex_lock(&priv
->adapter_mutex
);
1457 if (rf_kill_active(priv
)) {
1458 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1462 err
= ipw2100_hw_send_command(priv
, &cmd
);
1464 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1468 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1470 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1471 priv
->net_dev
->name
);
1475 if (priv
->stop_hang_check
) {
1476 priv
->stop_hang_check
= 0;
1477 queue_delayed_work(priv
->workqueue
, &priv
->hang_check
, HZ
/ 2);
1481 mutex_unlock(&priv
->adapter_mutex
);
1485 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1487 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1489 struct host_command cmd
= {
1490 .host_command
= HOST_PRE_POWER_DOWN
,
1491 .host_command_sequence
= 0,
1492 .host_command_length
= 0,
1497 if (!(priv
->status
& STATUS_RUNNING
))
1500 priv
->status
|= STATUS_STOPPING
;
1502 /* We can only shut down the card if the firmware is operational. So,
1503 * if we haven't reset since a fatal_error, then we can not send the
1504 * shutdown commands. */
1505 if (!priv
->fatal_error
) {
1506 /* First, make sure the adapter is enabled so that the PHY_OFF
1507 * command can shut it down */
1508 ipw2100_enable_adapter(priv
);
1510 err
= ipw2100_hw_phy_off(priv
);
1512 printk(KERN_WARNING DRV_NAME
1513 ": Error disabling radio %d\n", err
);
1516 * If in D0-standby mode going directly to D3 may cause a
1517 * PCI bus violation. Therefore we must change out of the D0
1520 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1521 * hardware from going into standby mode and will transition
1522 * out of D0-standby if it is already in that state.
1524 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1525 * driver upon completion. Once received, the driver can
1526 * proceed to the D3 state.
1528 * Prepare for power down command to fw. This command would
1529 * take HW out of D0-standby and prepare it for D3 state.
1531 * Currently FW does not support event notification for this
1532 * event. Therefore, skip waiting for it. Just wait a fixed
1535 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1537 err
= ipw2100_hw_send_command(priv
, &cmd
);
1539 printk(KERN_WARNING DRV_NAME
": "
1540 "%s: Power down command failed: Error %d\n",
1541 priv
->net_dev
->name
, err
);
1543 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1546 priv
->status
&= ~STATUS_ENABLED
;
1549 * Set GPIO 3 writable by FW; GPIO 1 writable
1550 * by driver and enable clock
1552 ipw2100_hw_set_gpio(priv
);
1555 * Power down adapter. Sequence:
1556 * 1. Stop master assert (RESET_REG[9]=1)
1557 * 2. Wait for stop master (RESET_REG[8]==1)
1558 * 3. S/w reset assert (RESET_REG[7] = 1)
1561 /* Stop master assert */
1562 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1563 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1565 /* wait stop master not more than 50 usec.
1566 * Otherwise return error. */
1567 for (i
= 5; i
> 0; i
--) {
1570 /* Check master stop bit */
1571 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1573 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1578 printk(KERN_WARNING DRV_NAME
1579 ": %s: Could now power down adapter.\n",
1580 priv
->net_dev
->name
);
1582 /* assert s/w reset */
1583 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1584 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1586 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1591 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1593 struct host_command cmd
= {
1594 .host_command
= CARD_DISABLE
,
1595 .host_command_sequence
= 0,
1596 .host_command_length
= 0
1600 IPW_DEBUG_HC("CARD_DISABLE\n");
1602 if (!(priv
->status
& STATUS_ENABLED
))
1605 /* Make sure we clear the associated state */
1606 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1608 if (!priv
->stop_hang_check
) {
1609 priv
->stop_hang_check
= 1;
1610 cancel_delayed_work(&priv
->hang_check
);
1613 mutex_lock(&priv
->adapter_mutex
);
1615 err
= ipw2100_hw_send_command(priv
, &cmd
);
1617 printk(KERN_WARNING DRV_NAME
1618 ": exit - failed to send CARD_DISABLE command\n");
1622 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1624 printk(KERN_WARNING DRV_NAME
1625 ": exit - card failed to change to DISABLED\n");
1629 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1632 mutex_unlock(&priv
->adapter_mutex
);
1636 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1638 struct host_command cmd
= {
1639 .host_command
= SET_SCAN_OPTIONS
,
1640 .host_command_sequence
= 0,
1641 .host_command_length
= 8
1645 IPW_DEBUG_INFO("enter\n");
1647 IPW_DEBUG_SCAN("setting scan options\n");
1649 cmd
.host_command_parameters
[0] = 0;
1651 if (!(priv
->config
& CFG_ASSOCIATE
))
1652 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1653 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1654 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1655 if (priv
->config
& CFG_PASSIVE_SCAN
)
1656 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1658 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1660 err
= ipw2100_hw_send_command(priv
, &cmd
);
1662 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1663 cmd
.host_command_parameters
[0]);
1668 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1670 struct host_command cmd
= {
1671 .host_command
= BROADCAST_SCAN
,
1672 .host_command_sequence
= 0,
1673 .host_command_length
= 4
1677 IPW_DEBUG_HC("START_SCAN\n");
1679 cmd
.host_command_parameters
[0] = 0;
1681 /* No scanning if in monitor mode */
1682 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1685 if (priv
->status
& STATUS_SCANNING
) {
1686 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1690 IPW_DEBUG_INFO("enter\n");
1692 /* Not clearing here; doing so makes iwlist always return nothing...
1694 * We should modify the table logic to use aging tables vs. clearing
1695 * the table on each scan start.
1697 IPW_DEBUG_SCAN("starting scan\n");
1699 priv
->status
|= STATUS_SCANNING
;
1700 err
= ipw2100_hw_send_command(priv
, &cmd
);
1702 priv
->status
&= ~STATUS_SCANNING
;
1704 IPW_DEBUG_INFO("exit\n");
1709 static const struct libipw_geo ipw_geos
[] = {
1713 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1714 {2427, 4}, {2432, 5}, {2437, 6},
1715 {2442, 7}, {2447, 8}, {2452, 9},
1716 {2457, 10}, {2462, 11}, {2467, 12},
1717 {2472, 13}, {2484, 14}},
1721 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1723 unsigned long flags
;
1726 u32 ord_len
= sizeof(lock
);
1728 /* Age scan list entries found before suspend */
1729 if (priv
->suspend_time
) {
1730 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1731 priv
->suspend_time
= 0;
1734 /* Quiet if manually disabled. */
1735 if (priv
->status
& STATUS_RF_KILL_SW
) {
1736 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1737 "switch\n", priv
->net_dev
->name
);
1741 /* the ipw2100 hardware really doesn't want power management delays
1742 * longer than 175usec
1744 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1746 /* If the interrupt is enabled, turn it off... */
1747 spin_lock_irqsave(&priv
->low_lock
, flags
);
1748 ipw2100_disable_interrupts(priv
);
1750 /* Reset any fatal_error conditions */
1751 ipw2100_reset_fatalerror(priv
);
1752 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1754 if (priv
->status
& STATUS_POWERED
||
1755 (priv
->status
& STATUS_RESET_PENDING
)) {
1756 /* Power cycle the card ... */
1757 if (ipw2100_power_cycle_adapter(priv
)) {
1758 printk(KERN_WARNING DRV_NAME
1759 ": %s: Could not cycle adapter.\n",
1760 priv
->net_dev
->name
);
1765 priv
->status
|= STATUS_POWERED
;
1767 /* Load the firmware, start the clocks, etc. */
1768 if (ipw2100_start_adapter(priv
)) {
1769 printk(KERN_ERR DRV_NAME
1770 ": %s: Failed to start the firmware.\n",
1771 priv
->net_dev
->name
);
1776 ipw2100_initialize_ordinals(priv
);
1778 /* Determine capabilities of this particular HW configuration */
1779 if (ipw2100_get_hw_features(priv
)) {
1780 printk(KERN_ERR DRV_NAME
1781 ": %s: Failed to determine HW features.\n",
1782 priv
->net_dev
->name
);
1787 /* Initialize the geo */
1788 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1789 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv
)) {
1824 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1825 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv
)) {
1833 printk(KERN_ERR DRV_NAME
": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv
->net_dev
->name
);
1836 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 /* Called by register_netdev() */
1904 static int ipw2100_net_init(struct net_device
*dev
)
1906 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1907 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1908 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1912 ret
= ipw2100_up(priv
, 1);
1916 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1918 /* fill-out priv->ieee->bg_band */
1919 if (geo
->bg_channels
) {
1920 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1922 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1923 bg_band
->n_channels
= geo
->bg_channels
;
1924 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1925 sizeof(struct ieee80211_channel
),
1927 if (!bg_band
->channels
) {
1931 /* translate geo->bg to bg_band.channels */
1932 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1933 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1934 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1935 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1936 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_PASSIVE_SCAN
;
1940 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1941 bg_band
->channels
[i
].flags
|=
1942 IEEE80211_CHAN_NO_IBSS
;
1943 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1944 bg_band
->channels
[i
].flags
|=
1945 IEEE80211_CHAN_RADAR
;
1946 /* No equivalent for LIBIPW_CH_80211H_RULES,
1947 LIBIPW_CH_UNIFORM_SPREADING, or
1948 LIBIPW_CH_B_ONLY... */
1950 /* point at bitrate info */
1951 bg_band
->bitrates
= ipw2100_bg_rates
;
1952 bg_band
->n_bitrates
= RATE_COUNT
;
1954 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1957 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1958 if (wiphy_register(wdev
->wiphy
)) {
1965 static void ipw2100_reset_adapter(struct work_struct
*work
)
1967 struct ipw2100_priv
*priv
=
1968 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1969 unsigned long flags
;
1970 union iwreq_data wrqu
= {
1972 .sa_family
= ARPHRD_ETHER
}
1974 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1976 spin_lock_irqsave(&priv
->low_lock
, flags
);
1977 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1979 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1980 priv
->status
|= STATUS_SECURITY_UPDATED
;
1982 /* Force a power cycle even if interface hasn't been opened
1984 cancel_delayed_work(&priv
->reset_work
);
1985 priv
->status
|= STATUS_RESET_PENDING
;
1986 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1988 mutex_lock(&priv
->action_mutex
);
1989 /* stop timed checks so that they don't interfere with reset */
1990 priv
->stop_hang_check
= 1;
1991 cancel_delayed_work(&priv
->hang_check
);
1993 /* We have to signal any supplicant if we are disassociating */
1995 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1997 ipw2100_up(priv
, 0);
1998 mutex_unlock(&priv
->action_mutex
);
2002 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2005 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2007 unsigned int len
, essid_len
;
2008 char essid
[IW_ESSID_MAX_SIZE
];
2013 DECLARE_SSID_BUF(ssid
);
2016 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2017 * an actual MAC of the AP. Seems like FW sets this
2018 * address too late. Read it later and expose through
2019 * /proc or schedule a later task to query and update
2022 essid_len
= IW_ESSID_MAX_SIZE
;
2023 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2026 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2032 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2034 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2040 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2042 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2047 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, &bssid
, &len
);
2049 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2053 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2056 case TX_RATE_1_MBIT
:
2057 txratename
= "1Mbps";
2059 case TX_RATE_2_MBIT
:
2060 txratename
= "2Mbsp";
2062 case TX_RATE_5_5_MBIT
:
2063 txratename
= "5.5Mbps";
2065 case TX_RATE_11_MBIT
:
2066 txratename
= "11Mbps";
2069 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2070 txratename
= "unknown rate";
2074 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2075 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2076 txratename
, chan
, bssid
);
2078 /* now we copy read ssid into dev */
2079 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2080 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2081 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2083 priv
->channel
= chan
;
2084 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2086 priv
->status
|= STATUS_ASSOCIATING
;
2087 priv
->connect_start
= get_seconds();
2089 queue_delayed_work(priv
->workqueue
, &priv
->wx_event_work
, HZ
/ 10);
2092 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2093 int length
, int batch_mode
)
2095 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2096 struct host_command cmd
= {
2097 .host_command
= SSID
,
2098 .host_command_sequence
= 0,
2099 .host_command_length
= ssid_len
2102 DECLARE_SSID_BUF(ssid
);
2104 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2107 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2110 err
= ipw2100_disable_adapter(priv
);
2115 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2116 * disable auto association -- so we cheat by setting a bogus SSID */
2117 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2119 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2120 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2121 bogus
[i
] = 0x18 + i
;
2122 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2125 /* NOTE: We always send the SSID command even if the provided ESSID is
2126 * the same as what we currently think is set. */
2128 err
= ipw2100_hw_send_command(priv
, &cmd
);
2130 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2131 memcpy(priv
->essid
, essid
, ssid_len
);
2132 priv
->essid_len
= ssid_len
;
2136 if (ipw2100_enable_adapter(priv
))
2143 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2145 DECLARE_SSID_BUF(ssid
);
2147 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2148 "disassociated: '%s' %pM\n",
2149 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2152 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2154 if (priv
->status
& STATUS_STOPPING
) {
2155 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2159 memset(priv
->bssid
, 0, ETH_ALEN
);
2160 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2162 netif_carrier_off(priv
->net_dev
);
2163 netif_stop_queue(priv
->net_dev
);
2165 if (!(priv
->status
& STATUS_RUNNING
))
2168 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2169 queue_delayed_work(priv
->workqueue
, &priv
->security_work
, 0);
2171 queue_delayed_work(priv
->workqueue
, &priv
->wx_event_work
, 0);
2174 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2176 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2177 priv
->net_dev
->name
);
2179 /* RF_KILL is now enabled (else we wouldn't be here) */
2180 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2181 priv
->status
|= STATUS_RF_KILL_HW
;
2183 /* Make sure the RF Kill check timer is running */
2184 priv
->stop_rf_kill
= 0;
2185 cancel_delayed_work(&priv
->rf_kill
);
2186 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
2187 round_jiffies_relative(HZ
));
2190 static void send_scan_event(void *data
)
2192 struct ipw2100_priv
*priv
= data
;
2193 union iwreq_data wrqu
;
2195 wrqu
.data
.length
= 0;
2196 wrqu
.data
.flags
= 0;
2197 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2200 static void ipw2100_scan_event_later(struct work_struct
*work
)
2202 send_scan_event(container_of(work
, struct ipw2100_priv
,
2203 scan_event_later
.work
));
2206 static void ipw2100_scan_event_now(struct work_struct
*work
)
2208 send_scan_event(container_of(work
, struct ipw2100_priv
,
2212 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2214 IPW_DEBUG_SCAN("scan complete\n");
2215 /* Age the scan results... */
2216 priv
->ieee
->scans
++;
2217 priv
->status
&= ~STATUS_SCANNING
;
2219 /* Only userspace-requested scan completion events go out immediately */
2220 if (!priv
->user_requested_scan
) {
2221 if (!delayed_work_pending(&priv
->scan_event_later
))
2222 queue_delayed_work(priv
->workqueue
,
2223 &priv
->scan_event_later
,
2224 round_jiffies_relative(msecs_to_jiffies(4000)));
2226 priv
->user_requested_scan
= 0;
2227 cancel_delayed_work(&priv
->scan_event_later
);
2228 queue_work(priv
->workqueue
, &priv
->scan_event_now
);
2232 #ifdef CONFIG_IPW2100_DEBUG
2233 #define IPW2100_HANDLER(v, f) { v, f, # v }
2234 struct ipw2100_status_indicator
{
2236 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2240 #define IPW2100_HANDLER(v, f) { v, f }
2241 struct ipw2100_status_indicator
{
2243 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2245 #endif /* CONFIG_IPW2100_DEBUG */
2247 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2249 IPW_DEBUG_SCAN("Scanning...\n");
2250 priv
->status
|= STATUS_SCANNING
;
2253 static const struct ipw2100_status_indicator status_handlers
[] = {
2254 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2255 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2256 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2257 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2258 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2259 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2260 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2261 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2262 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2263 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2264 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2265 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2266 IPW2100_HANDLER(-1, NULL
)
2269 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2273 if (status
== IPW_STATE_SCANNING
&&
2274 priv
->status
& STATUS_ASSOCIATED
&&
2275 !(priv
->status
& STATUS_SCANNING
)) {
2276 IPW_DEBUG_INFO("Scan detected while associated, with "
2277 "no scan request. Restarting firmware.\n");
2279 /* Wake up any sleeping jobs */
2280 schedule_reset(priv
);
2283 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2284 if (status
== status_handlers
[i
].status
) {
2285 IPW_DEBUG_NOTIF("Status change: %s\n",
2286 status_handlers
[i
].name
);
2287 if (status_handlers
[i
].cb
)
2288 status_handlers
[i
].cb(priv
, status
);
2289 priv
->wstats
.status
= status
;
2294 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2297 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2298 struct ipw2100_cmd_header
*cmd
)
2300 #ifdef CONFIG_IPW2100_DEBUG
2301 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2302 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2303 command_types
[cmd
->host_command_reg
],
2304 cmd
->host_command_reg
);
2307 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2308 priv
->status
|= STATUS_ENABLED
;
2310 if (cmd
->host_command_reg
== CARD_DISABLE
)
2311 priv
->status
&= ~STATUS_ENABLED
;
2313 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2315 wake_up_interruptible(&priv
->wait_command_queue
);
2318 #ifdef CONFIG_IPW2100_DEBUG
2319 static const char *frame_types
[] = {
2320 "COMMAND_STATUS_VAL",
2321 "STATUS_CHANGE_VAL",
2324 "HOST_NOTIFICATION_VAL"
2328 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2329 struct ipw2100_rx_packet
*packet
)
2331 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2335 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2336 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2337 sizeof(struct ipw2100_rx
),
2338 PCI_DMA_FROMDEVICE
);
2339 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2345 #define SEARCH_ERROR 0xffffffff
2346 #define SEARCH_FAIL 0xfffffffe
2347 #define SEARCH_SUCCESS 0xfffffff0
2348 #define SEARCH_DISCARD 0
2349 #define SEARCH_SNAPSHOT 1
2351 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2352 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2355 if (!priv
->snapshot
[0])
2357 for (i
= 0; i
< 0x30; i
++)
2358 kfree(priv
->snapshot
[i
]);
2359 priv
->snapshot
[0] = NULL
;
2362 #ifdef IPW2100_DEBUG_C3
2363 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2366 if (priv
->snapshot
[0])
2368 for (i
= 0; i
< 0x30; i
++) {
2369 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2370 if (!priv
->snapshot
[i
]) {
2371 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2372 "buffer %d\n", priv
->net_dev
->name
, i
);
2374 kfree(priv
->snapshot
[--i
]);
2375 priv
->snapshot
[0] = NULL
;
2383 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2384 size_t len
, int mode
)
2392 if (mode
== SEARCH_SNAPSHOT
) {
2393 if (!ipw2100_snapshot_alloc(priv
))
2394 mode
= SEARCH_DISCARD
;
2397 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2398 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2399 if (mode
== SEARCH_SNAPSHOT
)
2400 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2401 if (ret
== SEARCH_FAIL
) {
2403 for (j
= 0; j
< 4; j
++) {
2412 if ((s
- in_buf
) == len
)
2413 ret
= (i
+ j
) - len
+ 1;
2415 } else if (mode
== SEARCH_DISCARD
)
2425 * 0) Disconnect the SKB from the firmware (just unmap)
2426 * 1) Pack the ETH header into the SKB
2427 * 2) Pass the SKB to the network stack
2429 * When packet is provided by the firmware, it contains the following:
2434 * The size of the constructed ethernet
2437 #ifdef IPW2100_RX_DEBUG
2438 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2441 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2443 #ifdef IPW2100_DEBUG_C3
2444 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2449 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2450 i
* sizeof(struct ipw2100_status
));
2452 #ifdef IPW2100_DEBUG_C3
2453 /* Halt the firmware so we can get a good image */
2454 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2455 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2458 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2459 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2461 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2465 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2466 sizeof(struct ipw2100_status
),
2468 if (match
< SEARCH_SUCCESS
)
2469 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2470 "offset 0x%06X, length %d:\n",
2471 priv
->net_dev
->name
, match
,
2472 sizeof(struct ipw2100_status
));
2474 IPW_DEBUG_INFO("%s: No DMA status match in "
2475 "Firmware.\n", priv
->net_dev
->name
);
2477 printk_buf((u8
*) priv
->status_queue
.drv
,
2478 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2481 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2482 priv
->net_dev
->stats
.rx_errors
++;
2483 schedule_reset(priv
);
2486 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2487 struct libipw_rx_stats
*stats
)
2489 struct net_device
*dev
= priv
->net_dev
;
2490 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2491 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2493 IPW_DEBUG_RX("Handler...\n");
2495 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2496 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2499 status
->frame_size
, skb_tailroom(packet
->skb
));
2500 dev
->stats
.rx_errors
++;
2504 if (unlikely(!netif_running(dev
))) {
2505 dev
->stats
.rx_errors
++;
2506 priv
->wstats
.discard
.misc
++;
2507 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2511 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2512 !(priv
->status
& STATUS_ASSOCIATED
))) {
2513 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2514 priv
->wstats
.discard
.misc
++;
2518 pci_unmap_single(priv
->pci_dev
,
2520 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2522 skb_put(packet
->skb
, status
->frame_size
);
2524 #ifdef IPW2100_RX_DEBUG
2525 /* Make a copy of the frame so we can dump it to the logs if
2526 * libipw_rx fails */
2527 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2528 min_t(u32
, status
->frame_size
,
2529 IPW_RX_NIC_BUFFER_LENGTH
));
2532 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2533 #ifdef IPW2100_RX_DEBUG
2534 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2536 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2538 dev
->stats
.rx_errors
++;
2540 /* libipw_rx failed, so it didn't free the SKB */
2541 dev_kfree_skb_any(packet
->skb
);
2545 /* We need to allocate a new SKB and attach it to the RDB. */
2546 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2547 printk(KERN_WARNING DRV_NAME
": "
2548 "%s: Unable to allocate SKB onto RBD ring - disabling "
2549 "adapter.\n", dev
->name
);
2550 /* TODO: schedule adapter shutdown */
2551 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2554 /* Update the RDB entry */
2555 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2558 #ifdef CONFIG_IPW2100_MONITOR
2560 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2561 struct libipw_rx_stats
*stats
)
2563 struct net_device
*dev
= priv
->net_dev
;
2564 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2565 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2567 /* Magic struct that slots into the radiotap header -- no reason
2568 * to build this manually element by element, we can write it much
2569 * more efficiently than we can parse it. ORDER MATTERS HERE */
2571 struct ieee80211_radiotap_header rt_hdr
;
2572 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2575 IPW_DEBUG_RX("Handler...\n");
2577 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2578 sizeof(struct ipw_rt_hdr
))) {
2579 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2583 skb_tailroom(packet
->skb
));
2584 dev
->stats
.rx_errors
++;
2588 if (unlikely(!netif_running(dev
))) {
2589 dev
->stats
.rx_errors
++;
2590 priv
->wstats
.discard
.misc
++;
2591 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2595 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2596 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2597 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2598 dev
->stats
.rx_errors
++;
2602 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2603 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2604 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2605 packet
->skb
->data
, status
->frame_size
);
2607 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2609 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2610 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2611 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2613 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2615 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2617 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2619 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2620 dev
->stats
.rx_errors
++;
2622 /* libipw_rx failed, so it didn't free the SKB */
2623 dev_kfree_skb_any(packet
->skb
);
2627 /* We need to allocate a new SKB and attach it to the RDB. */
2628 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2630 "%s: Unable to allocate SKB onto RBD ring - disabling "
2631 "adapter.\n", dev
->name
);
2632 /* TODO: schedule adapter shutdown */
2633 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2636 /* Update the RDB entry */
2637 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2642 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2644 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2645 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2646 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2648 switch (frame_type
) {
2649 case COMMAND_STATUS_VAL
:
2650 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2651 case STATUS_CHANGE_VAL
:
2652 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2653 case HOST_NOTIFICATION_VAL
:
2654 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2655 case P80211_DATA_VAL
:
2656 case P8023_DATA_VAL
:
2657 #ifdef CONFIG_IPW2100_MONITOR
2660 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2661 case IEEE80211_FTYPE_MGMT
:
2662 case IEEE80211_FTYPE_CTL
:
2664 case IEEE80211_FTYPE_DATA
:
2665 return (status
->frame_size
>
2666 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2675 * ipw2100 interrupts are disabled at this point, and the ISR
2676 * is the only code that calls this method. So, we do not need
2677 * to play with any locks.
2679 * RX Queue works as follows:
2681 * Read index - firmware places packet in entry identified by the
2682 * Read index and advances Read index. In this manner,
2683 * Read index will always point to the next packet to
2684 * be filled--but not yet valid.
2686 * Write index - driver fills this entry with an unused RBD entry.
2687 * This entry has not filled by the firmware yet.
2689 * In between the W and R indexes are the RBDs that have been received
2690 * but not yet processed.
2692 * The process of handling packets will start at WRITE + 1 and advance
2693 * until it reaches the READ index.
2695 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2698 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2700 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2701 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2702 struct ipw2100_rx_packet
*packet
;
2705 struct ipw2100_rx
*u
;
2706 struct libipw_rx_stats stats
= {
2707 .mac_time
= jiffies
,
2710 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2711 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2713 if (r
>= rxq
->entries
) {
2714 IPW_DEBUG_RX("exit - bad read index\n");
2718 i
= (rxq
->next
+ 1) % rxq
->entries
;
2721 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2722 r, rxq->next, i); */
2724 packet
= &priv
->rx_buffers
[i
];
2726 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2727 * the correct values */
2728 pci_dma_sync_single_for_cpu(priv
->pci_dev
,
2730 sizeof(struct ipw2100_status
) * i
,
2731 sizeof(struct ipw2100_status
),
2732 PCI_DMA_FROMDEVICE
);
2734 /* Sync the DMA for the RX buffer so CPU is sure to get
2735 * the correct values */
2736 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2737 sizeof(struct ipw2100_rx
),
2738 PCI_DMA_FROMDEVICE
);
2740 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2741 ipw2100_corruption_detected(priv
, i
);
2746 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2747 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2748 stats
.len
= sq
->drv
[i
].frame_size
;
2751 if (stats
.rssi
!= 0)
2752 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2753 stats
.freq
= LIBIPW_24GHZ_BAND
;
2755 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2756 priv
->net_dev
->name
, frame_types
[frame_type
],
2759 switch (frame_type
) {
2760 case COMMAND_STATUS_VAL
:
2761 /* Reset Rx watchdog */
2762 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2765 case STATUS_CHANGE_VAL
:
2766 isr_status_change(priv
, u
->rx_data
.status
);
2769 case P80211_DATA_VAL
:
2770 case P8023_DATA_VAL
:
2771 #ifdef CONFIG_IPW2100_MONITOR
2772 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2773 isr_rx_monitor(priv
, i
, &stats
);
2777 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2779 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2780 case IEEE80211_FTYPE_MGMT
:
2781 libipw_rx_mgt(priv
->ieee
,
2782 &u
->rx_data
.header
, &stats
);
2785 case IEEE80211_FTYPE_CTL
:
2788 case IEEE80211_FTYPE_DATA
:
2789 isr_rx(priv
, i
, &stats
);
2797 /* clear status field associated with this RBD */
2798 rxq
->drv
[i
].status
.info
.field
= 0;
2800 i
= (i
+ 1) % rxq
->entries
;
2804 /* backtrack one entry, wrapping to end if at 0 */
2805 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2807 write_register(priv
->net_dev
,
2808 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2813 * __ipw2100_tx_process
2815 * This routine will determine whether the next packet on
2816 * the fw_pend_list has been processed by the firmware yet.
2818 * If not, then it does nothing and returns.
2820 * If so, then it removes the item from the fw_pend_list, frees
2821 * any associated storage, and places the item back on the
2822 * free list of its source (either msg_free_list or tx_free_list)
2824 * TX Queue works as follows:
2826 * Read index - points to the next TBD that the firmware will
2827 * process. The firmware will read the data, and once
2828 * done processing, it will advance the Read index.
2830 * Write index - driver fills this entry with an constructed TBD
2831 * entry. The Write index is not advanced until the
2832 * packet has been configured.
2834 * In between the W and R indexes are the TBDs that have NOT been
2835 * processed. Lagging behind the R index are packets that have
2836 * been processed but have not been freed by the driver.
2838 * In order to free old storage, an internal index will be maintained
2839 * that points to the next packet to be freed. When all used
2840 * packets have been freed, the oldest index will be the same as the
2841 * firmware's read index.
2843 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2845 * Because the TBD structure can not contain arbitrary data, the
2846 * driver must keep an internal queue of cached allocations such that
2847 * it can put that data back into the tx_free_list and msg_free_list
2848 * for use by future command and data packets.
2851 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2853 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2854 struct ipw2100_bd
*tbd
;
2855 struct list_head
*element
;
2856 struct ipw2100_tx_packet
*packet
;
2857 int descriptors_used
;
2859 u32 r
, w
, frag_num
= 0;
2861 if (list_empty(&priv
->fw_pend_list
))
2864 element
= priv
->fw_pend_list
.next
;
2866 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2867 tbd
= &txq
->drv
[packet
->index
];
2869 /* Determine how many TBD entries must be finished... */
2870 switch (packet
->type
) {
2872 /* COMMAND uses only one slot; don't advance */
2873 descriptors_used
= 1;
2878 /* DATA uses two slots; advance and loop position. */
2879 descriptors_used
= tbd
->num_fragments
;
2880 frag_num
= tbd
->num_fragments
- 1;
2881 e
= txq
->oldest
+ frag_num
;
2886 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2887 priv
->net_dev
->name
);
2891 /* if the last TBD is not done by NIC yet, then packet is
2892 * not ready to be released.
2895 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2897 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2900 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2901 priv
->net_dev
->name
);
2904 * txq->next is the index of the last packet written txq->oldest is
2905 * the index of the r is the index of the next packet to be read by
2910 * Quick graphic to help you visualize the following
2911 * if / else statement
2913 * ===>| s---->|===============
2915 * | a | b | c | d | e | f | g | h | i | j | k | l
2919 * w - updated by driver
2920 * r - updated by firmware
2921 * s - start of oldest BD entry (txq->oldest)
2922 * e - end of oldest BD entry
2925 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2926 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2931 DEC_STAT(&priv
->fw_pend_stat
);
2933 #ifdef CONFIG_IPW2100_DEBUG
2936 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2938 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2939 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2941 if (packet
->type
== DATA
) {
2942 i
= (i
+ 1) % txq
->entries
;
2944 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2946 (u32
) (txq
->nic
+ i
*
2947 sizeof(struct ipw2100_bd
)),
2948 (u32
) txq
->drv
[i
].host_addr
,
2949 txq
->drv
[i
].buf_length
);
2954 switch (packet
->type
) {
2956 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2957 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2958 "Expecting DATA TBD but pulled "
2959 "something else: ids %d=%d.\n",
2960 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2962 /* DATA packet; we have to unmap and free the SKB */
2963 for (i
= 0; i
< frag_num
; i
++) {
2964 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2966 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2967 (packet
->index
+ 1 + i
) % txq
->entries
,
2968 tbd
->host_addr
, tbd
->buf_length
);
2970 pci_unmap_single(priv
->pci_dev
,
2972 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2975 libipw_txb_free(packet
->info
.d_struct
.txb
);
2976 packet
->info
.d_struct
.txb
= NULL
;
2978 list_add_tail(element
, &priv
->tx_free_list
);
2979 INC_STAT(&priv
->tx_free_stat
);
2981 /* We have a free slot in the Tx queue, so wake up the
2982 * transmit layer if it is stopped. */
2983 if (priv
->status
& STATUS_ASSOCIATED
)
2984 netif_wake_queue(priv
->net_dev
);
2986 /* A packet was processed by the hardware, so update the
2988 priv
->net_dev
->trans_start
= jiffies
;
2993 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2994 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2995 "Expecting COMMAND TBD but pulled "
2996 "something else: ids %d=%d.\n",
2997 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2999 #ifdef CONFIG_IPW2100_DEBUG
3000 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
3001 ARRAY_SIZE(command_types
))
3002 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
3003 command_types
[packet
->info
.c_struct
.cmd
->
3005 packet
->info
.c_struct
.cmd
->
3007 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
3010 list_add_tail(element
, &priv
->msg_free_list
);
3011 INC_STAT(&priv
->msg_free_stat
);
3015 /* advance oldest used TBD pointer to start of next entry */
3016 txq
->oldest
= (e
+ 1) % txq
->entries
;
3017 /* increase available TBDs number */
3018 txq
->available
+= descriptors_used
;
3019 SET_STAT(&priv
->txq_stat
, txq
->available
);
3021 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3022 jiffies
- packet
->jiffy_start
);
3024 return (!list_empty(&priv
->fw_pend_list
));
3027 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3031 while (__ipw2100_tx_process(priv
) && i
< 200)
3035 printk(KERN_WARNING DRV_NAME
": "
3036 "%s: Driver is running slow (%d iters).\n",
3037 priv
->net_dev
->name
, i
);
3041 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3043 struct list_head
*element
;
3044 struct ipw2100_tx_packet
*packet
;
3045 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3046 struct ipw2100_bd
*tbd
;
3047 int next
= txq
->next
;
3049 while (!list_empty(&priv
->msg_pend_list
)) {
3050 /* if there isn't enough space in TBD queue, then
3051 * don't stuff a new one in.
3052 * NOTE: 3 are needed as a command will take one,
3053 * and there is a minimum of 2 that must be
3054 * maintained between the r and w indexes
3056 if (txq
->available
<= 3) {
3057 IPW_DEBUG_TX("no room in tx_queue\n");
3061 element
= priv
->msg_pend_list
.next
;
3063 DEC_STAT(&priv
->msg_pend_stat
);
3065 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3067 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
3068 &txq
->drv
[txq
->next
],
3069 (void *)(txq
->nic
+ txq
->next
*
3070 sizeof(struct ipw2100_bd
)));
3072 packet
->index
= txq
->next
;
3074 tbd
= &txq
->drv
[txq
->next
];
3076 /* initialize TBD */
3077 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3078 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3079 /* not marking number of fragments causes problems
3080 * with f/w debug version */
3081 tbd
->num_fragments
= 1;
3082 tbd
->status
.info
.field
=
3083 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3084 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3086 /* update TBD queue counters */
3088 txq
->next
%= txq
->entries
;
3090 DEC_STAT(&priv
->txq_stat
);
3092 list_add_tail(element
, &priv
->fw_pend_list
);
3093 INC_STAT(&priv
->fw_pend_stat
);
3096 if (txq
->next
!= next
) {
3097 /* kick off the DMA by notifying firmware the
3098 * write index has moved; make sure TBD stores are sync'd */
3100 write_register(priv
->net_dev
,
3101 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3107 * ipw2100_tx_send_data
3110 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3112 struct list_head
*element
;
3113 struct ipw2100_tx_packet
*packet
;
3114 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3115 struct ipw2100_bd
*tbd
;
3116 int next
= txq
->next
;
3118 struct ipw2100_data_header
*ipw_hdr
;
3119 struct libipw_hdr_3addr
*hdr
;
3121 while (!list_empty(&priv
->tx_pend_list
)) {
3122 /* if there isn't enough space in TBD queue, then
3123 * don't stuff a new one in.
3124 * NOTE: 4 are needed as a data will take two,
3125 * and there is a minimum of 2 that must be
3126 * maintained between the r and w indexes
3128 element
= priv
->tx_pend_list
.next
;
3129 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3131 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3133 /* TODO: Support merging buffers if more than
3134 * IPW_MAX_BDS are used */
3135 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3136 "Increase fragmentation level.\n",
3137 priv
->net_dev
->name
);
3140 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3141 IPW_DEBUG_TX("no room in tx_queue\n");
3146 DEC_STAT(&priv
->tx_pend_stat
);
3148 tbd
= &txq
->drv
[txq
->next
];
3150 packet
->index
= txq
->next
;
3152 ipw_hdr
= packet
->info
.d_struct
.data
;
3153 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3156 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3157 /* To DS: Addr1 = BSSID, Addr2 = SA,
3159 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3160 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3161 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3162 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3164 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3165 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3168 ipw_hdr
->host_command_reg
= SEND
;
3169 ipw_hdr
->host_command_reg1
= 0;
3171 /* For now we only support host based encryption */
3172 ipw_hdr
->needs_encryption
= 0;
3173 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3174 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3175 ipw_hdr
->fragment_size
=
3176 packet
->info
.d_struct
.txb
->frag_size
-
3179 ipw_hdr
->fragment_size
= 0;
3181 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3182 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3183 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3184 tbd
->status
.info
.field
=
3185 IPW_BD_STATUS_TX_FRAME_802_3
|
3186 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3188 txq
->next
%= txq
->entries
;
3190 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3191 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3192 #ifdef CONFIG_IPW2100_DEBUG
3193 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3194 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3195 packet
->info
.d_struct
.txb
->nr_frags
);
3198 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3199 tbd
= &txq
->drv
[txq
->next
];
3200 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3201 tbd
->status
.info
.field
=
3202 IPW_BD_STATUS_TX_FRAME_802_3
|
3203 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3205 tbd
->status
.info
.field
=
3206 IPW_BD_STATUS_TX_FRAME_802_3
|
3207 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3209 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3210 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3212 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3213 packet
->info
.d_struct
.
3220 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3221 txq
->next
, tbd
->host_addr
,
3224 pci_dma_sync_single_for_device(priv
->pci_dev
,
3230 txq
->next
%= txq
->entries
;
3233 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3234 SET_STAT(&priv
->txq_stat
, txq
->available
);
3236 list_add_tail(element
, &priv
->fw_pend_list
);
3237 INC_STAT(&priv
->fw_pend_stat
);
3240 if (txq
->next
!= next
) {
3241 /* kick off the DMA by notifying firmware the
3242 * write index has moved; make sure TBD stores are sync'd */
3243 write_register(priv
->net_dev
,
3244 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3249 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3251 struct net_device
*dev
= priv
->net_dev
;
3252 unsigned long flags
;
3255 spin_lock_irqsave(&priv
->low_lock
, flags
);
3256 ipw2100_disable_interrupts(priv
);
3258 read_register(dev
, IPW_REG_INTA
, &inta
);
3260 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3261 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3266 /* We do not loop and keep polling for more interrupts as this
3267 * is frowned upon and doesn't play nicely with other potentially
3269 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3270 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3272 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3273 printk(KERN_WARNING DRV_NAME
3274 ": Fatal interrupt. Scheduling firmware restart.\n");
3276 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3278 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3279 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3280 priv
->net_dev
->name
, priv
->fatal_error
);
3282 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3283 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3284 priv
->net_dev
->name
, tmp
);
3286 /* Wake up any sleeping jobs */
3287 schedule_reset(priv
);
3290 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3291 printk(KERN_ERR DRV_NAME
3292 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3294 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3297 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3298 IPW_DEBUG_ISR("RX interrupt\n");
3300 priv
->rx_interrupts
++;
3302 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3304 __ipw2100_rx_process(priv
);
3305 __ipw2100_tx_complete(priv
);
3308 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3309 IPW_DEBUG_ISR("TX interrupt\n");
3311 priv
->tx_interrupts
++;
3313 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3315 __ipw2100_tx_complete(priv
);
3316 ipw2100_tx_send_commands(priv
);
3317 ipw2100_tx_send_data(priv
);
3320 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3321 IPW_DEBUG_ISR("TX complete\n");
3323 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3325 __ipw2100_tx_complete(priv
);
3328 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3329 /* ipw2100_handle_event(dev); */
3331 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3334 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3335 IPW_DEBUG_ISR("FW init done interrupt\n");
3338 read_register(dev
, IPW_REG_INTA
, &tmp
);
3339 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3340 IPW2100_INTA_PARITY_ERROR
)) {
3341 write_register(dev
, IPW_REG_INTA
,
3342 IPW2100_INTA_FATAL_ERROR
|
3343 IPW2100_INTA_PARITY_ERROR
);
3346 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3349 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3350 IPW_DEBUG_ISR("Status change interrupt\n");
3352 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3355 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3356 IPW_DEBUG_ISR("slave host mode interrupt\n");
3358 write_register(dev
, IPW_REG_INTA
,
3359 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3363 ipw2100_enable_interrupts(priv
);
3365 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3367 IPW_DEBUG_ISR("exit\n");
3370 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3372 struct ipw2100_priv
*priv
= data
;
3373 u32 inta
, inta_mask
;
3378 spin_lock(&priv
->low_lock
);
3380 /* We check to see if we should be ignoring interrupts before
3381 * we touch the hardware. During ucode load if we try and handle
3382 * an interrupt we can cause keyboard problems as well as cause
3383 * the ucode to fail to initialize */
3384 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3389 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3390 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3392 if (inta
== 0xFFFFFFFF) {
3393 /* Hardware disappeared */
3394 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3398 inta
&= IPW_INTERRUPT_MASK
;
3400 if (!(inta
& inta_mask
)) {
3401 /* Shared interrupt */
3405 /* We disable the hardware interrupt here just to prevent unneeded
3406 * calls to be made. We disable this again within the actual
3407 * work tasklet, so if another part of the code re-enables the
3408 * interrupt, that is fine */
3409 ipw2100_disable_interrupts(priv
);
3411 tasklet_schedule(&priv
->irq_tasklet
);
3412 spin_unlock(&priv
->low_lock
);
3416 spin_unlock(&priv
->low_lock
);
3420 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3421 struct net_device
*dev
, int pri
)
3423 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3424 struct list_head
*element
;
3425 struct ipw2100_tx_packet
*packet
;
3426 unsigned long flags
;
3428 spin_lock_irqsave(&priv
->low_lock
, flags
);
3430 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3431 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3432 priv
->net_dev
->stats
.tx_carrier_errors
++;
3433 netif_stop_queue(dev
);
3437 if (list_empty(&priv
->tx_free_list
))
3440 element
= priv
->tx_free_list
.next
;
3441 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3443 packet
->info
.d_struct
.txb
= txb
;
3445 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3446 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3448 packet
->jiffy_start
= jiffies
;
3451 DEC_STAT(&priv
->tx_free_stat
);
3453 list_add_tail(element
, &priv
->tx_pend_list
);
3454 INC_STAT(&priv
->tx_pend_stat
);
3456 ipw2100_tx_send_data(priv
);
3458 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3459 return NETDEV_TX_OK
;
3462 netif_stop_queue(dev
);
3463 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3464 return NETDEV_TX_BUSY
;
3467 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3469 int i
, j
, err
= -EINVAL
;
3474 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3476 if (!priv
->msg_buffers
) {
3477 printk(KERN_ERR DRV_NAME
": %s: PCI alloc failed for msg "
3478 "buffers.\n", priv
->net_dev
->name
);
3482 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3483 v
= pci_alloc_consistent(priv
->pci_dev
,
3484 sizeof(struct ipw2100_cmd_header
), &p
);
3486 printk(KERN_ERR DRV_NAME
": "
3487 "%s: PCI alloc failed for msg "
3488 "buffers.\n", priv
->net_dev
->name
);
3493 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3495 priv
->msg_buffers
[i
].type
= COMMAND
;
3496 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3497 (struct ipw2100_cmd_header
*)v
;
3498 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3501 if (i
== IPW_COMMAND_POOL_SIZE
)
3504 for (j
= 0; j
< i
; j
++) {
3505 pci_free_consistent(priv
->pci_dev
,
3506 sizeof(struct ipw2100_cmd_header
),
3507 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3508 priv
->msg_buffers
[j
].info
.c_struct
.
3512 kfree(priv
->msg_buffers
);
3513 priv
->msg_buffers
= NULL
;
3518 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3522 INIT_LIST_HEAD(&priv
->msg_free_list
);
3523 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3525 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3526 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3527 SET_STAT(&priv
->msg_free_stat
, i
);
3532 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3536 if (!priv
->msg_buffers
)
3539 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3540 pci_free_consistent(priv
->pci_dev
,
3541 sizeof(struct ipw2100_cmd_header
),
3542 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3543 priv
->msg_buffers
[i
].info
.c_struct
.
3547 kfree(priv
->msg_buffers
);
3548 priv
->msg_buffers
= NULL
;
3551 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3554 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3559 for (i
= 0; i
< 16; i
++) {
3560 out
+= sprintf(out
, "[%08X] ", i
* 16);
3561 for (j
= 0; j
< 16; j
+= 4) {
3562 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3563 out
+= sprintf(out
, "%08X ", val
);
3565 out
+= sprintf(out
, "\n");
3571 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3573 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3576 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3577 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3580 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3582 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3585 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3586 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3589 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3591 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3594 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3595 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3598 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3600 #define IPW2100_REG(x) { IPW_ ##x, #x }
3601 static const struct {
3605 IPW2100_REG(REG_GP_CNTRL
),
3606 IPW2100_REG(REG_GPIO
),
3607 IPW2100_REG(REG_INTA
),
3608 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3609 #define IPW2100_NIC(x, s) { x, #x, s }
3610 static const struct {
3615 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3616 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3617 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3618 static const struct {
3623 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3624 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3625 "successful Host Tx's (MSDU)"),
3626 IPW2100_ORD(STAT_TX_DIR_DATA
,
3627 "successful Directed Tx's (MSDU)"),
3628 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3629 "successful Directed Tx's (MSDU) @ 1MB"),
3630 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3631 "successful Directed Tx's (MSDU) @ 2MB"),
3632 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3633 "successful Directed Tx's (MSDU) @ 5_5MB"),
3634 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3635 "successful Directed Tx's (MSDU) @ 11MB"),
3636 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3637 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3638 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3639 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3640 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3641 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3642 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3643 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3644 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3645 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3646 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3647 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3648 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3649 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3650 "successful Association response Tx's"),
3651 IPW2100_ORD(STAT_TX_REASSN
,
3652 "successful Reassociation Tx's"),
3653 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3654 "successful Reassociation response Tx's"),
3655 IPW2100_ORD(STAT_TX_PROBE
,
3656 "probes successfully transmitted"),
3657 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3658 "probe responses successfully transmitted"),
3659 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3660 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3661 IPW2100_ORD(STAT_TX_DISASSN
,
3662 "successful Disassociation TX"),
3663 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3664 IPW2100_ORD(STAT_TX_DEAUTH
,
3665 "successful Deauthentication TX"),
3666 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3667 "Total successful Tx data bytes"),
3668 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3669 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3670 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3671 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3672 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3673 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3674 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3675 "times max tries in a hop failed"),
3676 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3677 "times disassociation failed"),
3678 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3679 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3680 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3681 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3682 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3683 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3684 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3685 "directed packets at 5.5MB"),
3686 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3687 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3688 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3689 "nondirected packets at 1MB"),
3690 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3691 "nondirected packets at 2MB"),
3692 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3693 "nondirected packets at 5.5MB"),
3694 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3695 "nondirected packets at 11MB"),
3696 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3697 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3699 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3700 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3701 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3702 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3703 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3704 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3705 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3706 "Reassociation response Rx's"),
3707 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3708 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3709 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3710 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3711 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3712 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3713 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3714 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3715 "Total rx data bytes received"),
3716 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3717 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3718 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3719 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3720 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3721 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3722 "duplicate rx packets at 1MB"),
3723 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3724 "duplicate rx packets at 2MB"),
3725 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3726 "duplicate rx packets at 5.5MB"),
3727 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3728 "duplicate rx packets at 11MB"),
3729 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3730 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3731 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3732 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3733 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3734 "rx frames with invalid protocol"),
3735 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3736 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3737 "rx frames rejected due to no buffer"),
3738 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3739 "rx frames dropped due to missing fragment"),
3740 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3741 "rx frames dropped due to non-sequential fragment"),
3742 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3743 "rx frames dropped due to unmatched 1st frame"),
3744 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3745 "rx frames dropped due to uncompleted frame"),
3746 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3747 "ICV errors during decryption"),
3748 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3749 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3750 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3751 "poll response timeouts"),
3752 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3753 "timeouts waiting for last {broad,multi}cast pkt"),
3754 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3755 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3756 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3757 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3758 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3759 "current calculation of % missed beacons"),
3760 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3761 "current calculation of % missed tx retries"),
3762 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3763 "0 if not associated, else pointer to AP table entry"),
3764 IPW2100_ORD(AVAILABLE_AP_CNT
,
3765 "AP's decsribed in the AP table"),
3766 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3767 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3768 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3769 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3770 "failures due to response fail"),
3771 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3772 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3773 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3774 "times roaming was inhibited due to activity"),
3775 IPW2100_ORD(RSSI_AT_ASSN
,
3776 "RSSI of associated AP at time of association"),
3777 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3778 "reassociation: no probe response or TX on hop"),
3779 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3780 "reassociation: poor tx/rx quality"),
3781 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3782 "reassociation: tx/rx quality (excessive AP load"),
3783 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3784 "reassociation: AP RSSI level"),
3785 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3786 "reassociations due to load leveling"),
3787 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3788 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3789 "times authentication response failed"),
3790 IPW2100_ORD(STATION_TABLE_CNT
,
3791 "entries in association table"),
3792 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3793 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3794 IPW2100_ORD(COUNTRY_CODE
,
3795 "IEEE country code as recv'd from beacon"),
3796 IPW2100_ORD(COUNTRY_CHANNELS
,
3797 "channels suported by country"),
3798 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3799 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3800 IPW2100_ORD(ANTENNA_DIVERSITY
,
3801 "TRUE if antenna diversity is disabled"),
3802 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3803 IPW2100_ORD(OUR_FREQ
,
3804 "current radio freq lower digits - channel ID"),
3805 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3806 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3807 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3808 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3809 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3810 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3811 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3812 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3813 IPW2100_ORD(CAPABILITIES
,
3814 "Management frame capability field"),
3815 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3816 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3817 IPW2100_ORD(RTS_THRESHOLD
,
3818 "Min packet length for RTS handshaking"),
3819 IPW2100_ORD(INT_MODE
, "International mode"),
3820 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3821 "protocol frag threshold"),
3822 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3823 "EEPROM offset in SRAM"),
3824 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3825 "EEPROM size in SRAM"),
3826 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3827 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3828 "EEPROM IBSS 11b channel set"),
3829 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3830 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3831 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3832 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3833 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3835 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3839 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3840 struct net_device
*dev
= priv
->net_dev
;
3844 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3846 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3847 read_register(dev
, hw_data
[i
].addr
, &val
);
3848 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3849 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3855 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3857 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3860 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3861 struct net_device
*dev
= priv
->net_dev
;
3865 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3867 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3872 switch (nic_data
[i
].size
) {
3874 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3875 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3876 nic_data
[i
].name
, nic_data
[i
].addr
,
3880 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3881 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3882 nic_data
[i
].name
, nic_data
[i
].addr
,
3886 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3887 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3888 nic_data
[i
].name
, nic_data
[i
].addr
,
3896 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3898 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3901 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3902 struct net_device
*dev
= priv
->net_dev
;
3903 static unsigned long loop
= 0;
3909 if (loop
>= 0x30000)
3912 /* sysfs provides us PAGE_SIZE buffer */
3913 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3915 if (priv
->snapshot
[0])
3916 for (i
= 0; i
< 4; i
++)
3918 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3920 for (i
= 0; i
< 4; i
++)
3921 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3924 len
+= sprintf(buf
+ len
,
3929 ((u8
*) buffer
)[0x0],
3930 ((u8
*) buffer
)[0x1],
3931 ((u8
*) buffer
)[0x2],
3932 ((u8
*) buffer
)[0x3],
3933 ((u8
*) buffer
)[0x4],
3934 ((u8
*) buffer
)[0x5],
3935 ((u8
*) buffer
)[0x6],
3936 ((u8
*) buffer
)[0x7],
3937 ((u8
*) buffer
)[0x8],
3938 ((u8
*) buffer
)[0x9],
3939 ((u8
*) buffer
)[0xa],
3940 ((u8
*) buffer
)[0xb],
3941 ((u8
*) buffer
)[0xc],
3942 ((u8
*) buffer
)[0xd],
3943 ((u8
*) buffer
)[0xe],
3944 ((u8
*) buffer
)[0xf]);
3946 len
+= sprintf(buf
+ len
, "%s\n",
3947 snprint_line(line
, sizeof(line
),
3948 (u8
*) buffer
, 16, loop
));
3955 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3956 const char *buf
, size_t count
)
3958 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3959 struct net_device
*dev
= priv
->net_dev
;
3960 const char *p
= buf
;
3962 (void)dev
; /* kill unused-var warning for debug-only code */
3968 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3969 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3973 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3974 tolower(p
[1]) == 'f')) {
3975 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3979 } else if (tolower(p
[0]) == 'r') {
3980 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3981 ipw2100_snapshot_free(priv
);
3984 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3985 "reset = clear memory snapshot\n", dev
->name
);
3990 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3992 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3995 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3999 static int loop
= 0;
4001 if (priv
->status
& STATUS_RF_KILL_MASK
)
4004 if (loop
>= ARRAY_SIZE(ord_data
))
4007 /* sysfs provides us PAGE_SIZE buffer */
4008 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
4009 val_len
= sizeof(u32
);
4011 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
4013 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
4014 ord_data
[loop
].index
,
4015 ord_data
[loop
].desc
);
4017 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4018 ord_data
[loop
].index
, val
,
4019 ord_data
[loop
].desc
);
4026 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4028 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4031 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4034 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4035 priv
->interrupts
, priv
->tx_interrupts
,
4036 priv
->rx_interrupts
, priv
->inta_other
);
4037 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4038 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4039 #ifdef CONFIG_IPW2100_DEBUG
4040 out
+= sprintf(out
, "packet mismatch image: %s\n",
4041 priv
->snapshot
[0] ? "YES" : "NO");
4047 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4049 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4053 if (mode
== priv
->ieee
->iw_mode
)
4056 err
= ipw2100_disable_adapter(priv
);
4058 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4059 priv
->net_dev
->name
, err
);
4065 priv
->net_dev
->type
= ARPHRD_ETHER
;
4068 priv
->net_dev
->type
= ARPHRD_ETHER
;
4070 #ifdef CONFIG_IPW2100_MONITOR
4071 case IW_MODE_MONITOR
:
4072 priv
->last_mode
= priv
->ieee
->iw_mode
;
4073 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4075 #endif /* CONFIG_IPW2100_MONITOR */
4078 priv
->ieee
->iw_mode
= mode
;
4081 /* Indicate ipw2100_download_firmware download firmware
4082 * from disk instead of memory. */
4083 ipw2100_firmware
.version
= 0;
4086 printk(KERN_INFO
"%s: Reseting on mode change.\n", priv
->net_dev
->name
);
4087 priv
->reset_backoff
= 0;
4088 schedule_reset(priv
);
4093 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4096 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4099 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4101 if (priv
->status
& STATUS_ASSOCIATED
)
4102 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4103 get_seconds() - priv
->connect_start
);
4105 len
+= sprintf(buf
+ len
, "not connected\n");
4107 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4108 DUMP_VAR(status
, "08lx");
4109 DUMP_VAR(config
, "08lx");
4110 DUMP_VAR(capability
, "08lx");
4113 sprintf(buf
+ len
, "last_rtc: %lu\n",
4114 (unsigned long)priv
->last_rtc
);
4116 DUMP_VAR(fatal_error
, "d");
4117 DUMP_VAR(stop_hang_check
, "d");
4118 DUMP_VAR(stop_rf_kill
, "d");
4119 DUMP_VAR(messages_sent
, "d");
4121 DUMP_VAR(tx_pend_stat
.value
, "d");
4122 DUMP_VAR(tx_pend_stat
.hi
, "d");
4124 DUMP_VAR(tx_free_stat
.value
, "d");
4125 DUMP_VAR(tx_free_stat
.lo
, "d");
4127 DUMP_VAR(msg_free_stat
.value
, "d");
4128 DUMP_VAR(msg_free_stat
.lo
, "d");
4130 DUMP_VAR(msg_pend_stat
.value
, "d");
4131 DUMP_VAR(msg_pend_stat
.hi
, "d");
4133 DUMP_VAR(fw_pend_stat
.value
, "d");
4134 DUMP_VAR(fw_pend_stat
.hi
, "d");
4136 DUMP_VAR(txq_stat
.value
, "d");
4137 DUMP_VAR(txq_stat
.lo
, "d");
4139 DUMP_VAR(ieee
->scans
, "d");
4140 DUMP_VAR(reset_backoff
, "d");
4145 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4147 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4150 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4151 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4155 unsigned int length
;
4158 if (priv
->status
& STATUS_RF_KILL_MASK
)
4161 memset(essid
, 0, sizeof(essid
));
4162 memset(bssid
, 0, sizeof(bssid
));
4164 length
= IW_ESSID_MAX_SIZE
;
4165 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4167 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4170 length
= sizeof(bssid
);
4171 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4174 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4177 length
= sizeof(u32
);
4178 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4180 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4183 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4184 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4185 out
+= sprintf(out
, "Channel: %d\n", chan
);
4190 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4192 #ifdef CONFIG_IPW2100_DEBUG
4193 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4195 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4198 static ssize_t
store_debug_level(struct device_driver
*d
,
4199 const char *buf
, size_t count
)
4201 char *p
= (char *)buf
;
4204 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4206 if (p
[0] == 'x' || p
[0] == 'X')
4208 val
= simple_strtoul(p
, &p
, 16);
4210 val
= simple_strtoul(p
, &p
, 10);
4212 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4214 ipw2100_debug_level
= val
;
4216 return strnlen(buf
, count
);
4219 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4221 #endif /* CONFIG_IPW2100_DEBUG */
4223 static ssize_t
show_fatal_error(struct device
*d
,
4224 struct device_attribute
*attr
, char *buf
)
4226 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4230 if (priv
->fatal_error
)
4231 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4233 out
+= sprintf(out
, "0\n");
4235 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4236 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4237 IPW2100_ERROR_QUEUE
])
4240 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4241 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4242 IPW2100_ERROR_QUEUE
]);
4248 static ssize_t
store_fatal_error(struct device
*d
,
4249 struct device_attribute
*attr
, const char *buf
,
4252 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4253 schedule_reset(priv
);
4257 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4260 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4263 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4264 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4267 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4268 const char *buf
, size_t count
)
4270 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4271 struct net_device
*dev
= priv
->net_dev
;
4272 char buffer
[] = "00000000";
4274 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4278 (void)dev
; /* kill unused-var warning for debug-only code */
4280 IPW_DEBUG_INFO("enter\n");
4282 strncpy(buffer
, buf
, len
);
4285 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4287 if (p
[0] == 'x' || p
[0] == 'X')
4289 val
= simple_strtoul(p
, &p
, 16);
4291 val
= simple_strtoul(p
, &p
, 10);
4293 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4295 priv
->ieee
->scan_age
= val
;
4296 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4299 IPW_DEBUG_INFO("exit\n");
4303 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4305 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4308 /* 0 - RF kill not enabled
4309 1 - SW based RF kill active (sysfs)
4310 2 - HW based RF kill active
4311 3 - Both HW and SW baed RF kill active */
4312 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4313 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4314 (rf_kill_active(priv
) ? 0x2 : 0x0);
4315 return sprintf(buf
, "%i\n", val
);
4318 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4320 if ((disable_radio
? 1 : 0) ==
4321 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4324 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4325 disable_radio
? "OFF" : "ON");
4327 mutex_lock(&priv
->action_mutex
);
4329 if (disable_radio
) {
4330 priv
->status
|= STATUS_RF_KILL_SW
;
4333 priv
->status
&= ~STATUS_RF_KILL_SW
;
4334 if (rf_kill_active(priv
)) {
4335 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4336 "disabled by HW switch\n");
4337 /* Make sure the RF_KILL check timer is running */
4338 priv
->stop_rf_kill
= 0;
4339 cancel_delayed_work(&priv
->rf_kill
);
4340 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
4341 round_jiffies_relative(HZ
));
4343 schedule_reset(priv
);
4346 mutex_unlock(&priv
->action_mutex
);
4350 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4351 const char *buf
, size_t count
)
4353 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4354 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4358 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4360 static struct attribute
*ipw2100_sysfs_entries
[] = {
4361 &dev_attr_hardware
.attr
,
4362 &dev_attr_registers
.attr
,
4363 &dev_attr_ordinals
.attr
,
4365 &dev_attr_stats
.attr
,
4366 &dev_attr_internals
.attr
,
4367 &dev_attr_bssinfo
.attr
,
4368 &dev_attr_memory
.attr
,
4369 &dev_attr_scan_age
.attr
,
4370 &dev_attr_fatal_error
.attr
,
4371 &dev_attr_rf_kill
.attr
,
4373 &dev_attr_status
.attr
,
4374 &dev_attr_capability
.attr
,
4378 static struct attribute_group ipw2100_attribute_group
= {
4379 .attrs
= ipw2100_sysfs_entries
,
4382 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4384 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4386 IPW_DEBUG_INFO("enter\n");
4388 q
->size
= entries
* sizeof(struct ipw2100_status
);
4390 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4393 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4397 memset(q
->drv
, 0, q
->size
);
4399 IPW_DEBUG_INFO("exit\n");
4404 static void status_queue_free(struct ipw2100_priv
*priv
)
4406 IPW_DEBUG_INFO("enter\n");
4408 if (priv
->status_queue
.drv
) {
4409 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4410 priv
->status_queue
.drv
,
4411 priv
->status_queue
.nic
);
4412 priv
->status_queue
.drv
= NULL
;
4415 IPW_DEBUG_INFO("exit\n");
4418 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4419 struct ipw2100_bd_queue
*q
, int entries
)
4421 IPW_DEBUG_INFO("enter\n");
4423 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4425 q
->entries
= entries
;
4426 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4427 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4430 ("can't allocate shared memory for buffer descriptors\n");
4433 memset(q
->drv
, 0, q
->size
);
4435 IPW_DEBUG_INFO("exit\n");
4440 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4442 IPW_DEBUG_INFO("enter\n");
4448 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4452 IPW_DEBUG_INFO("exit\n");
4455 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4456 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4459 IPW_DEBUG_INFO("enter\n");
4461 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4464 write_register(priv
->net_dev
, base
, q
->nic
);
4465 write_register(priv
->net_dev
, size
, q
->entries
);
4466 write_register(priv
->net_dev
, r
, q
->oldest
);
4467 write_register(priv
->net_dev
, w
, q
->next
);
4469 IPW_DEBUG_INFO("exit\n");
4472 static void ipw2100_kill_workqueue(struct ipw2100_priv
*priv
)
4474 if (priv
->workqueue
) {
4475 priv
->stop_rf_kill
= 1;
4476 priv
->stop_hang_check
= 1;
4477 cancel_delayed_work(&priv
->reset_work
);
4478 cancel_delayed_work(&priv
->security_work
);
4479 cancel_delayed_work(&priv
->wx_event_work
);
4480 cancel_delayed_work(&priv
->hang_check
);
4481 cancel_delayed_work(&priv
->rf_kill
);
4482 cancel_delayed_work(&priv
->scan_event_later
);
4483 destroy_workqueue(priv
->workqueue
);
4484 priv
->workqueue
= NULL
;
4488 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4490 int i
, j
, err
= -EINVAL
;
4494 IPW_DEBUG_INFO("enter\n");
4496 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4498 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4499 priv
->net_dev
->name
);
4504 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4506 if (!priv
->tx_buffers
) {
4507 printk(KERN_ERR DRV_NAME
4508 ": %s: alloc failed form tx buffers.\n",
4509 priv
->net_dev
->name
);
4510 bd_queue_free(priv
, &priv
->tx_queue
);
4514 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4515 v
= pci_alloc_consistent(priv
->pci_dev
,
4516 sizeof(struct ipw2100_data_header
),
4519 printk(KERN_ERR DRV_NAME
4520 ": %s: PCI alloc failed for tx " "buffers.\n",
4521 priv
->net_dev
->name
);
4526 priv
->tx_buffers
[i
].type
= DATA
;
4527 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4528 (struct ipw2100_data_header
*)v
;
4529 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4530 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4533 if (i
== TX_PENDED_QUEUE_LENGTH
)
4536 for (j
= 0; j
< i
; j
++) {
4537 pci_free_consistent(priv
->pci_dev
,
4538 sizeof(struct ipw2100_data_header
),
4539 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4540 priv
->tx_buffers
[j
].info
.d_struct
.
4544 kfree(priv
->tx_buffers
);
4545 priv
->tx_buffers
= NULL
;
4550 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4554 IPW_DEBUG_INFO("enter\n");
4557 * reinitialize packet info lists
4559 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4560 INIT_STAT(&priv
->fw_pend_stat
);
4563 * reinitialize lists
4565 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4566 INIT_LIST_HEAD(&priv
->tx_free_list
);
4567 INIT_STAT(&priv
->tx_pend_stat
);
4568 INIT_STAT(&priv
->tx_free_stat
);
4570 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4571 /* We simply drop any SKBs that have been queued for
4573 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4574 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4576 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4579 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4582 SET_STAT(&priv
->tx_free_stat
, i
);
4584 priv
->tx_queue
.oldest
= 0;
4585 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4586 priv
->tx_queue
.next
= 0;
4587 INIT_STAT(&priv
->txq_stat
);
4588 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4590 bd_queue_initialize(priv
, &priv
->tx_queue
,
4591 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4592 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4593 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4594 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4596 IPW_DEBUG_INFO("exit\n");
4600 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4604 IPW_DEBUG_INFO("enter\n");
4606 bd_queue_free(priv
, &priv
->tx_queue
);
4608 if (!priv
->tx_buffers
)
4611 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4612 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4613 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4615 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4617 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4618 pci_free_consistent(priv
->pci_dev
,
4619 sizeof(struct ipw2100_data_header
),
4620 priv
->tx_buffers
[i
].info
.d_struct
.
4622 priv
->tx_buffers
[i
].info
.d_struct
.
4626 kfree(priv
->tx_buffers
);
4627 priv
->tx_buffers
= NULL
;
4629 IPW_DEBUG_INFO("exit\n");
4632 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4634 int i
, j
, err
= -EINVAL
;
4636 IPW_DEBUG_INFO("enter\n");
4638 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4640 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4644 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4646 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4647 bd_queue_free(priv
, &priv
->rx_queue
);
4654 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4655 sizeof(struct ipw2100_rx_packet
),
4657 if (!priv
->rx_buffers
) {
4658 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4660 bd_queue_free(priv
, &priv
->rx_queue
);
4662 status_queue_free(priv
);
4667 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4668 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4670 err
= ipw2100_alloc_skb(priv
, packet
);
4671 if (unlikely(err
)) {
4676 /* The BD holds the cache aligned address */
4677 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4678 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4679 priv
->status_queue
.drv
[i
].status_fields
= 0;
4682 if (i
== RX_QUEUE_LENGTH
)
4685 for (j
= 0; j
< i
; j
++) {
4686 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4687 sizeof(struct ipw2100_rx_packet
),
4688 PCI_DMA_FROMDEVICE
);
4689 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4692 kfree(priv
->rx_buffers
);
4693 priv
->rx_buffers
= NULL
;
4695 bd_queue_free(priv
, &priv
->rx_queue
);
4697 status_queue_free(priv
);
4702 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4704 IPW_DEBUG_INFO("enter\n");
4706 priv
->rx_queue
.oldest
= 0;
4707 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4708 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4710 INIT_STAT(&priv
->rxq_stat
);
4711 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4713 bd_queue_initialize(priv
, &priv
->rx_queue
,
4714 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4715 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4716 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4717 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4719 /* set up the status queue */
4720 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4721 priv
->status_queue
.nic
);
4723 IPW_DEBUG_INFO("exit\n");
4726 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4730 IPW_DEBUG_INFO("enter\n");
4732 bd_queue_free(priv
, &priv
->rx_queue
);
4733 status_queue_free(priv
);
4735 if (!priv
->rx_buffers
)
4738 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4739 if (priv
->rx_buffers
[i
].rxp
) {
4740 pci_unmap_single(priv
->pci_dev
,
4741 priv
->rx_buffers
[i
].dma_addr
,
4742 sizeof(struct ipw2100_rx
),
4743 PCI_DMA_FROMDEVICE
);
4744 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4748 kfree(priv
->rx_buffers
);
4749 priv
->rx_buffers
= NULL
;
4751 IPW_DEBUG_INFO("exit\n");
4754 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4756 u32 length
= ETH_ALEN
;
4761 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4763 IPW_DEBUG_INFO("MAC address read failed\n");
4767 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4768 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4773 /********************************************************************
4777 ********************************************************************/
4779 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4781 struct host_command cmd
= {
4782 .host_command
= ADAPTER_ADDRESS
,
4783 .host_command_sequence
= 0,
4784 .host_command_length
= ETH_ALEN
4788 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4790 IPW_DEBUG_INFO("enter\n");
4792 if (priv
->config
& CFG_CUSTOM_MAC
) {
4793 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4794 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4796 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4799 err
= ipw2100_hw_send_command(priv
, &cmd
);
4801 IPW_DEBUG_INFO("exit\n");
4805 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4808 struct host_command cmd
= {
4809 .host_command
= PORT_TYPE
,
4810 .host_command_sequence
= 0,
4811 .host_command_length
= sizeof(u32
)
4815 switch (port_type
) {
4817 cmd
.host_command_parameters
[0] = IPW_BSS
;
4820 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4824 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4825 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4828 err
= ipw2100_disable_adapter(priv
);
4830 printk(KERN_ERR DRV_NAME
4831 ": %s: Could not disable adapter %d\n",
4832 priv
->net_dev
->name
, err
);
4837 /* send cmd to firmware */
4838 err
= ipw2100_hw_send_command(priv
, &cmd
);
4841 ipw2100_enable_adapter(priv
);
4846 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4849 struct host_command cmd
= {
4850 .host_command
= CHANNEL
,
4851 .host_command_sequence
= 0,
4852 .host_command_length
= sizeof(u32
)
4856 cmd
.host_command_parameters
[0] = channel
;
4858 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4860 /* If BSS then we don't support channel selection */
4861 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4864 if ((channel
!= 0) &&
4865 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4869 err
= ipw2100_disable_adapter(priv
);
4874 err
= ipw2100_hw_send_command(priv
, &cmd
);
4876 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4881 priv
->config
|= CFG_STATIC_CHANNEL
;
4883 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4885 priv
->channel
= channel
;
4888 err
= ipw2100_enable_adapter(priv
);
4896 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4898 struct host_command cmd
= {
4899 .host_command
= SYSTEM_CONFIG
,
4900 .host_command_sequence
= 0,
4901 .host_command_length
= 12,
4903 u32 ibss_mask
, len
= sizeof(u32
);
4906 /* Set system configuration */
4909 err
= ipw2100_disable_adapter(priv
);
4914 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4915 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4917 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4918 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4920 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4921 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4923 err
= ipw2100_get_ordinal(priv
,
4924 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4927 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4929 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4930 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4933 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4935 err
= ipw2100_hw_send_command(priv
, &cmd
);
4939 /* If IPv6 is configured in the kernel then we don't want to filter out all
4940 * of the multicast packets as IPv6 needs some. */
4941 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4942 cmd
.host_command
= ADD_MULTICAST
;
4943 cmd
.host_command_sequence
= 0;
4944 cmd
.host_command_length
= 0;
4946 ipw2100_hw_send_command(priv
, &cmd
);
4949 err
= ipw2100_enable_adapter(priv
);
4957 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4960 struct host_command cmd
= {
4961 .host_command
= BASIC_TX_RATES
,
4962 .host_command_sequence
= 0,
4963 .host_command_length
= 4
4967 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4970 err
= ipw2100_disable_adapter(priv
);
4975 /* Set BASIC TX Rate first */
4976 ipw2100_hw_send_command(priv
, &cmd
);
4979 cmd
.host_command
= TX_RATES
;
4980 ipw2100_hw_send_command(priv
, &cmd
);
4982 /* Set MSDU TX Rate */
4983 cmd
.host_command
= MSDU_TX_RATES
;
4984 ipw2100_hw_send_command(priv
, &cmd
);
4987 err
= ipw2100_enable_adapter(priv
);
4992 priv
->tx_rates
= rate
;
4997 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4999 struct host_command cmd
= {
5000 .host_command
= POWER_MODE
,
5001 .host_command_sequence
= 0,
5002 .host_command_length
= 4
5006 cmd
.host_command_parameters
[0] = power_level
;
5008 err
= ipw2100_hw_send_command(priv
, &cmd
);
5012 if (power_level
== IPW_POWER_MODE_CAM
)
5013 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
5015 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
5017 #ifdef IPW2100_TX_POWER
5018 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
5019 /* Set beacon interval */
5020 cmd
.host_command
= TX_POWER_INDEX
;
5021 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5023 err
= ipw2100_hw_send_command(priv
, &cmd
);
5032 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5034 struct host_command cmd
= {
5035 .host_command
= RTS_THRESHOLD
,
5036 .host_command_sequence
= 0,
5037 .host_command_length
= 4
5041 if (threshold
& RTS_DISABLED
)
5042 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5044 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5046 err
= ipw2100_hw_send_command(priv
, &cmd
);
5050 priv
->rts_threshold
= threshold
;
5056 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5057 u32 threshold
, int batch_mode
)
5059 struct host_command cmd
= {
5060 .host_command
= FRAG_THRESHOLD
,
5061 .host_command_sequence
= 0,
5062 .host_command_length
= 4,
5063 .host_command_parameters
[0] = 0,
5068 err
= ipw2100_disable_adapter(priv
);
5074 threshold
= DEFAULT_FRAG_THRESHOLD
;
5076 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5077 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5080 cmd
.host_command_parameters
[0] = threshold
;
5082 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5084 err
= ipw2100_hw_send_command(priv
, &cmd
);
5087 ipw2100_enable_adapter(priv
);
5090 priv
->frag_threshold
= threshold
;
5096 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5098 struct host_command cmd
= {
5099 .host_command
= SHORT_RETRY_LIMIT
,
5100 .host_command_sequence
= 0,
5101 .host_command_length
= 4
5105 cmd
.host_command_parameters
[0] = retry
;
5107 err
= ipw2100_hw_send_command(priv
, &cmd
);
5111 priv
->short_retry_limit
= retry
;
5116 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5118 struct host_command cmd
= {
5119 .host_command
= LONG_RETRY_LIMIT
,
5120 .host_command_sequence
= 0,
5121 .host_command_length
= 4
5125 cmd
.host_command_parameters
[0] = retry
;
5127 err
= ipw2100_hw_send_command(priv
, &cmd
);
5131 priv
->long_retry_limit
= retry
;
5136 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5139 struct host_command cmd
= {
5140 .host_command
= MANDATORY_BSSID
,
5141 .host_command_sequence
= 0,
5142 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5146 #ifdef CONFIG_IPW2100_DEBUG
5148 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5150 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5152 /* if BSSID is empty then we disable mandatory bssid mode */
5154 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5157 err
= ipw2100_disable_adapter(priv
);
5162 err
= ipw2100_hw_send_command(priv
, &cmd
);
5165 ipw2100_enable_adapter(priv
);
5170 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5172 struct host_command cmd
= {
5173 .host_command
= DISASSOCIATION_BSSID
,
5174 .host_command_sequence
= 0,
5175 .host_command_length
= ETH_ALEN
5180 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5183 /* The Firmware currently ignores the BSSID and just disassociates from
5184 * the currently associated AP -- but in the off chance that a future
5185 * firmware does use the BSSID provided here, we go ahead and try and
5186 * set it to the currently associated AP's BSSID */
5187 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5189 err
= ipw2100_hw_send_command(priv
, &cmd
);
5194 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5195 struct ipw2100_wpa_assoc_frame
*, int)
5196 __attribute__ ((unused
));
5198 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5199 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5202 struct host_command cmd
= {
5203 .host_command
= SET_WPA_IE
,
5204 .host_command_sequence
= 0,
5205 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5209 IPW_DEBUG_HC("SET_WPA_IE\n");
5212 err
= ipw2100_disable_adapter(priv
);
5217 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5218 sizeof(struct ipw2100_wpa_assoc_frame
));
5220 err
= ipw2100_hw_send_command(priv
, &cmd
);
5223 if (ipw2100_enable_adapter(priv
))
5230 struct security_info_params
{
5231 u32 allowed_ciphers
;
5234 u8 replay_counters_number
;
5235 u8 unicast_using_group
;
5238 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5241 int unicast_using_group
,
5244 struct host_command cmd
= {
5245 .host_command
= SET_SECURITY_INFORMATION
,
5246 .host_command_sequence
= 0,
5247 .host_command_length
= sizeof(struct security_info_params
)
5249 struct security_info_params
*security
=
5250 (struct security_info_params
*)&cmd
.host_command_parameters
;
5252 memset(security
, 0, sizeof(*security
));
5254 /* If shared key AP authentication is turned on, then we need to
5255 * configure the firmware to try and use it.
5257 * Actual data encryption/decryption is handled by the host. */
5258 security
->auth_mode
= auth_mode
;
5259 security
->unicast_using_group
= unicast_using_group
;
5261 switch (security_level
) {
5264 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5267 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5271 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5272 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5274 case SEC_LEVEL_2_CKIP
:
5275 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5276 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5279 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5280 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5285 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5286 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5288 security
->replay_counters_number
= 0;
5291 err
= ipw2100_disable_adapter(priv
);
5296 err
= ipw2100_hw_send_command(priv
, &cmd
);
5299 ipw2100_enable_adapter(priv
);
5304 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5306 struct host_command cmd
= {
5307 .host_command
= TX_POWER_INDEX
,
5308 .host_command_sequence
= 0,
5309 .host_command_length
= 4
5314 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5315 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5316 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5318 cmd
.host_command_parameters
[0] = tmp
;
5320 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5321 err
= ipw2100_hw_send_command(priv
, &cmd
);
5323 priv
->tx_power
= tx_power
;
5328 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5329 u32 interval
, int batch_mode
)
5331 struct host_command cmd
= {
5332 .host_command
= BEACON_INTERVAL
,
5333 .host_command_sequence
= 0,
5334 .host_command_length
= 4
5338 cmd
.host_command_parameters
[0] = interval
;
5340 IPW_DEBUG_INFO("enter\n");
5342 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5344 err
= ipw2100_disable_adapter(priv
);
5349 ipw2100_hw_send_command(priv
, &cmd
);
5352 err
= ipw2100_enable_adapter(priv
);
5358 IPW_DEBUG_INFO("exit\n");
5363 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5365 ipw2100_tx_initialize(priv
);
5366 ipw2100_rx_initialize(priv
);
5367 ipw2100_msg_initialize(priv
);
5370 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5372 ipw2100_tx_free(priv
);
5373 ipw2100_rx_free(priv
);
5374 ipw2100_msg_free(priv
);
5377 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5379 if (ipw2100_tx_allocate(priv
) ||
5380 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5386 ipw2100_tx_free(priv
);
5387 ipw2100_rx_free(priv
);
5388 ipw2100_msg_free(priv
);
5392 #define IPW_PRIVACY_CAPABLE 0x0008
5394 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5397 struct host_command cmd
= {
5398 .host_command
= WEP_FLAGS
,
5399 .host_command_sequence
= 0,
5400 .host_command_length
= 4
5404 cmd
.host_command_parameters
[0] = flags
;
5406 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5409 err
= ipw2100_disable_adapter(priv
);
5411 printk(KERN_ERR DRV_NAME
5412 ": %s: Could not disable adapter %d\n",
5413 priv
->net_dev
->name
, err
);
5418 /* send cmd to firmware */
5419 err
= ipw2100_hw_send_command(priv
, &cmd
);
5422 ipw2100_enable_adapter(priv
);
5427 struct ipw2100_wep_key
{
5433 /* Macros to ease up priting WEP keys */
5434 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5435 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5436 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5437 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5442 * @priv: struct to work on
5443 * @idx: index of the key we want to set
5444 * @key: ptr to the key data to set
5445 * @len: length of the buffer at @key
5446 * @batch_mode: FIXME perform the operation in batch mode, not
5447 * disabling the device.
5449 * @returns 0 if OK, < 0 errno code on error.
5451 * Fill out a command structure with the new wep key, length an
5452 * index and send it down the wire.
5454 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5455 int idx
, char *key
, int len
, int batch_mode
)
5457 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5458 struct host_command cmd
= {
5459 .host_command
= WEP_KEY_INFO
,
5460 .host_command_sequence
= 0,
5461 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5463 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5466 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5469 /* NOTE: We don't check cached values in case the firmware was reset
5470 * or some other problem is occurring. If the user is setting the key,
5471 * then we push the change */
5474 wep_key
->len
= keylen
;
5477 memcpy(wep_key
->key
, key
, len
);
5478 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5481 /* Will be optimized out on debug not being configured in */
5483 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5484 priv
->net_dev
->name
, wep_key
->idx
);
5485 else if (keylen
== 5)
5486 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5487 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5488 WEP_STR_64(wep_key
->key
));
5490 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5492 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5493 WEP_STR_128(wep_key
->key
));
5496 err
= ipw2100_disable_adapter(priv
);
5497 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5499 printk(KERN_ERR DRV_NAME
5500 ": %s: Could not disable adapter %d\n",
5501 priv
->net_dev
->name
, err
);
5506 /* send cmd to firmware */
5507 err
= ipw2100_hw_send_command(priv
, &cmd
);
5510 int err2
= ipw2100_enable_adapter(priv
);
5517 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5518 int idx
, int batch_mode
)
5520 struct host_command cmd
= {
5521 .host_command
= WEP_KEY_INDEX
,
5522 .host_command_sequence
= 0,
5523 .host_command_length
= 4,
5524 .host_command_parameters
= {idx
},
5528 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5530 if (idx
< 0 || idx
> 3)
5534 err
= ipw2100_disable_adapter(priv
);
5536 printk(KERN_ERR DRV_NAME
5537 ": %s: Could not disable adapter %d\n",
5538 priv
->net_dev
->name
, err
);
5543 /* send cmd to firmware */
5544 err
= ipw2100_hw_send_command(priv
, &cmd
);
5547 ipw2100_enable_adapter(priv
);
5552 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5554 int i
, err
, auth_mode
, sec_level
, use_group
;
5556 if (!(priv
->status
& STATUS_RUNNING
))
5560 err
= ipw2100_disable_adapter(priv
);
5565 if (!priv
->ieee
->sec
.enabled
) {
5567 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5570 auth_mode
= IPW_AUTH_OPEN
;
5571 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5572 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5573 auth_mode
= IPW_AUTH_SHARED
;
5574 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5575 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5578 sec_level
= SEC_LEVEL_0
;
5579 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5580 sec_level
= priv
->ieee
->sec
.level
;
5583 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5584 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5587 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5594 if (priv
->ieee
->sec
.enabled
) {
5595 for (i
= 0; i
< 4; i
++) {
5596 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5597 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5598 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5600 err
= ipw2100_set_key(priv
, i
,
5601 priv
->ieee
->sec
.keys
[i
],
5609 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5612 /* Always enable privacy so the Host can filter WEP packets if
5613 * encrypted data is sent up */
5615 ipw2100_set_wep_flags(priv
,
5617 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5621 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5625 ipw2100_enable_adapter(priv
);
5630 static void ipw2100_security_work(struct work_struct
*work
)
5632 struct ipw2100_priv
*priv
=
5633 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5635 /* If we happen to have reconnected before we get a chance to
5636 * process this, then update the security settings--which causes
5637 * a disassociation to occur */
5638 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5639 priv
->status
& STATUS_SECURITY_UPDATED
)
5640 ipw2100_configure_security(priv
, 0);
5643 static void shim__set_security(struct net_device
*dev
,
5644 struct libipw_security
*sec
)
5646 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5647 int i
, force_update
= 0;
5649 mutex_lock(&priv
->action_mutex
);
5650 if (!(priv
->status
& STATUS_INITIALIZED
))
5653 for (i
= 0; i
< 4; i
++) {
5654 if (sec
->flags
& (1 << i
)) {
5655 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5656 if (sec
->key_sizes
[i
] == 0)
5657 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5659 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5661 if (sec
->level
== SEC_LEVEL_1
) {
5662 priv
->ieee
->sec
.flags
|= (1 << i
);
5663 priv
->status
|= STATUS_SECURITY_UPDATED
;
5665 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5669 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5670 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5671 if (sec
->active_key
<= 3) {
5672 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5673 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5675 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5677 priv
->status
|= STATUS_SECURITY_UPDATED
;
5680 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5681 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5682 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5683 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5684 priv
->status
|= STATUS_SECURITY_UPDATED
;
5687 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5688 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5689 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5690 priv
->status
|= STATUS_SECURITY_UPDATED
;
5694 if (sec
->flags
& SEC_ENCRYPT
)
5695 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5697 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5698 priv
->ieee
->sec
.level
= sec
->level
;
5699 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5700 priv
->status
|= STATUS_SECURITY_UPDATED
;
5703 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5704 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5705 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5706 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5707 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5708 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5709 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5710 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5711 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5712 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5714 /* As a temporary work around to enable WPA until we figure out why
5715 * wpa_supplicant toggles the security capability of the driver, which
5716 * forces a disassocation with force_update...
5718 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5719 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5720 ipw2100_configure_security(priv
, 0);
5722 mutex_unlock(&priv
->action_mutex
);
5725 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5731 IPW_DEBUG_INFO("enter\n");
5733 err
= ipw2100_disable_adapter(priv
);
5736 #ifdef CONFIG_IPW2100_MONITOR
5737 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5738 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5742 IPW_DEBUG_INFO("exit\n");
5746 #endif /* CONFIG_IPW2100_MONITOR */
5748 err
= ipw2100_read_mac_address(priv
);
5752 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5756 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5760 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5761 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5766 err
= ipw2100_system_config(priv
, batch_mode
);
5770 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5774 /* Default to power mode OFF */
5775 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5779 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5783 if (priv
->config
& CFG_STATIC_BSSID
)
5784 bssid
= priv
->bssid
;
5787 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5791 if (priv
->config
& CFG_STATIC_ESSID
)
5792 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5795 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5799 err
= ipw2100_configure_security(priv
, batch_mode
);
5803 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5805 ipw2100_set_ibss_beacon_interval(priv
,
5806 priv
->beacon_interval
,
5811 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5817 err = ipw2100_set_fragmentation_threshold(
5818 priv, priv->frag_threshold, batch_mode);
5823 IPW_DEBUG_INFO("exit\n");
5828 /*************************************************************************
5830 * EXTERNALLY CALLED METHODS
5832 *************************************************************************/
5834 /* This method is called by the network layer -- not to be confused with
5835 * ipw2100_set_mac_address() declared above called by this driver (and this
5836 * method as well) to talk to the firmware */
5837 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5839 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5840 struct sockaddr
*addr
= p
;
5843 if (!is_valid_ether_addr(addr
->sa_data
))
5844 return -EADDRNOTAVAIL
;
5846 mutex_lock(&priv
->action_mutex
);
5848 priv
->config
|= CFG_CUSTOM_MAC
;
5849 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5851 err
= ipw2100_set_mac_address(priv
, 0);
5855 priv
->reset_backoff
= 0;
5856 mutex_unlock(&priv
->action_mutex
);
5857 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5861 mutex_unlock(&priv
->action_mutex
);
5865 static int ipw2100_open(struct net_device
*dev
)
5867 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5868 unsigned long flags
;
5869 IPW_DEBUG_INFO("dev->open\n");
5871 spin_lock_irqsave(&priv
->low_lock
, flags
);
5872 if (priv
->status
& STATUS_ASSOCIATED
) {
5873 netif_carrier_on(dev
);
5874 netif_start_queue(dev
);
5876 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5881 static int ipw2100_close(struct net_device
*dev
)
5883 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5884 unsigned long flags
;
5885 struct list_head
*element
;
5886 struct ipw2100_tx_packet
*packet
;
5888 IPW_DEBUG_INFO("enter\n");
5890 spin_lock_irqsave(&priv
->low_lock
, flags
);
5892 if (priv
->status
& STATUS_ASSOCIATED
)
5893 netif_carrier_off(dev
);
5894 netif_stop_queue(dev
);
5896 /* Flush the TX queue ... */
5897 while (!list_empty(&priv
->tx_pend_list
)) {
5898 element
= priv
->tx_pend_list
.next
;
5899 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5902 DEC_STAT(&priv
->tx_pend_stat
);
5904 libipw_txb_free(packet
->info
.d_struct
.txb
);
5905 packet
->info
.d_struct
.txb
= NULL
;
5907 list_add_tail(element
, &priv
->tx_free_list
);
5908 INC_STAT(&priv
->tx_free_stat
);
5910 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5912 IPW_DEBUG_INFO("exit\n");
5918 * TODO: Fix this function... its just wrong
5920 static void ipw2100_tx_timeout(struct net_device
*dev
)
5922 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5924 dev
->stats
.tx_errors
++;
5926 #ifdef CONFIG_IPW2100_MONITOR
5927 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5931 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5933 schedule_reset(priv
);
5936 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5938 /* This is called when wpa_supplicant loads and closes the driver
5940 priv
->ieee
->wpa_enabled
= value
;
5944 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5947 struct libipw_device
*ieee
= priv
->ieee
;
5948 struct libipw_security sec
= {
5949 .flags
= SEC_AUTH_MODE
,
5953 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5954 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5956 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5957 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5959 } else if (value
& IW_AUTH_ALG_LEAP
) {
5960 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5965 if (ieee
->set_security
)
5966 ieee
->set_security(ieee
->dev
, &sec
);
5973 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5974 char *wpa_ie
, int wpa_ie_len
)
5977 struct ipw2100_wpa_assoc_frame frame
;
5979 frame
.fixed_ie_mask
= 0;
5982 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5983 frame
.var_ie_len
= wpa_ie_len
;
5985 /* make sure WPA is enabled */
5986 ipw2100_wpa_enable(priv
, 1);
5987 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5990 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5991 struct ethtool_drvinfo
*info
)
5993 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5994 char fw_ver
[64], ucode_ver
[64];
5996 strcpy(info
->driver
, DRV_NAME
);
5997 strcpy(info
->version
, DRV_VERSION
);
5999 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
6000 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
6002 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
6003 fw_ver
, priv
->eeprom_version
, ucode_ver
);
6005 strcpy(info
->bus_info
, pci_name(priv
->pci_dev
));
6008 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
6010 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6011 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
6014 static const struct ethtool_ops ipw2100_ethtool_ops
= {
6015 .get_link
= ipw2100_ethtool_get_link
,
6016 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6019 static void ipw2100_hang_check(struct work_struct
*work
)
6021 struct ipw2100_priv
*priv
=
6022 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6023 unsigned long flags
;
6024 u32 rtc
= 0xa5a5a5a5;
6025 u32 len
= sizeof(rtc
);
6028 spin_lock_irqsave(&priv
->low_lock
, flags
);
6030 if (priv
->fatal_error
!= 0) {
6031 /* If fatal_error is set then we need to restart */
6032 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6033 priv
->net_dev
->name
);
6036 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6037 (rtc
== priv
->last_rtc
)) {
6038 /* Check if firmware is hung */
6039 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6040 priv
->net_dev
->name
);
6047 priv
->stop_hang_check
= 1;
6050 /* Restart the NIC */
6051 schedule_reset(priv
);
6054 priv
->last_rtc
= rtc
;
6056 if (!priv
->stop_hang_check
)
6057 queue_delayed_work(priv
->workqueue
, &priv
->hang_check
, HZ
/ 2);
6059 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6062 static void ipw2100_rf_kill(struct work_struct
*work
)
6064 struct ipw2100_priv
*priv
=
6065 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6066 unsigned long flags
;
6068 spin_lock_irqsave(&priv
->low_lock
, flags
);
6070 if (rf_kill_active(priv
)) {
6071 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6072 if (!priv
->stop_rf_kill
)
6073 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
6074 round_jiffies_relative(HZ
));
6078 /* RF Kill is now disabled, so bring the device back up */
6080 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6081 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6083 schedule_reset(priv
);
6085 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6089 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6092 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6094 static const struct net_device_ops ipw2100_netdev_ops
= {
6095 .ndo_open
= ipw2100_open
,
6096 .ndo_stop
= ipw2100_close
,
6097 .ndo_start_xmit
= libipw_xmit
,
6098 .ndo_change_mtu
= libipw_change_mtu
,
6099 .ndo_init
= ipw2100_net_init
,
6100 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6101 .ndo_set_mac_address
= ipw2100_set_address
,
6102 .ndo_validate_addr
= eth_validate_addr
,
6105 /* Look into using netdev destructor to shutdown libipw? */
6107 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6108 void __iomem
* base_addr
,
6109 unsigned long mem_start
,
6110 unsigned long mem_len
)
6112 struct ipw2100_priv
*priv
;
6113 struct net_device
*dev
;
6115 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6118 priv
= libipw_priv(dev
);
6119 priv
->ieee
= netdev_priv(dev
);
6120 priv
->pci_dev
= pci_dev
;
6121 priv
->net_dev
= dev
;
6123 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6124 priv
->ieee
->set_security
= shim__set_security
;
6126 priv
->ieee
->perfect_rssi
= -20;
6127 priv
->ieee
->worst_rssi
= -85;
6129 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6130 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6131 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6132 priv
->wireless_data
.libipw
= priv
->ieee
;
6133 dev
->wireless_data
= &priv
->wireless_data
;
6134 dev
->watchdog_timeo
= 3 * HZ
;
6137 dev
->base_addr
= (unsigned long)base_addr
;
6138 dev
->mem_start
= mem_start
;
6139 dev
->mem_end
= dev
->mem_start
+ mem_len
- 1;
6141 /* NOTE: We don't use the wireless_handlers hook
6142 * in dev as the system will start throwing WX requests
6143 * to us before we're actually initialized and it just
6144 * ends up causing problems. So, we just handle
6145 * the WX extensions through the ipw2100_ioctl interface */
6147 /* memset() puts everything to 0, so we only have explicitly set
6148 * those values that need to be something else */
6150 /* If power management is turned on, default to AUTO mode */
6151 priv
->power_mode
= IPW_POWER_AUTO
;
6153 #ifdef CONFIG_IPW2100_MONITOR
6154 priv
->config
|= CFG_CRC_CHECK
;
6156 priv
->ieee
->wpa_enabled
= 0;
6157 priv
->ieee
->drop_unencrypted
= 0;
6158 priv
->ieee
->privacy_invoked
= 0;
6159 priv
->ieee
->ieee802_1x
= 1;
6161 /* Set module parameters */
6162 switch (network_mode
) {
6164 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6166 #ifdef CONFIG_IPW2100_MONITOR
6168 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6173 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6178 priv
->status
|= STATUS_RF_KILL_SW
;
6181 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6182 priv
->config
|= CFG_STATIC_CHANNEL
;
6183 priv
->channel
= channel
;
6187 priv
->config
|= CFG_ASSOCIATE
;
6189 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6190 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6191 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6192 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6193 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6194 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6195 priv
->tx_rates
= DEFAULT_TX_RATES
;
6197 strcpy(priv
->nick
, "ipw2100");
6199 spin_lock_init(&priv
->low_lock
);
6200 mutex_init(&priv
->action_mutex
);
6201 mutex_init(&priv
->adapter_mutex
);
6203 init_waitqueue_head(&priv
->wait_command_queue
);
6205 netif_carrier_off(dev
);
6207 INIT_LIST_HEAD(&priv
->msg_free_list
);
6208 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6209 INIT_STAT(&priv
->msg_free_stat
);
6210 INIT_STAT(&priv
->msg_pend_stat
);
6212 INIT_LIST_HEAD(&priv
->tx_free_list
);
6213 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6214 INIT_STAT(&priv
->tx_free_stat
);
6215 INIT_STAT(&priv
->tx_pend_stat
);
6217 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6218 INIT_STAT(&priv
->fw_pend_stat
);
6220 priv
->workqueue
= create_workqueue(DRV_NAME
);
6222 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6223 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6224 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6225 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6226 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6227 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6228 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6230 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6231 ipw2100_irq_tasklet
, (unsigned long)priv
);
6233 /* NOTE: We do not start the deferred work for status checks yet */
6234 priv
->stop_rf_kill
= 1;
6235 priv
->stop_hang_check
= 1;
6240 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6241 const struct pci_device_id
*ent
)
6243 unsigned long mem_start
, mem_len
, mem_flags
;
6244 void __iomem
*base_addr
= NULL
;
6245 struct net_device
*dev
= NULL
;
6246 struct ipw2100_priv
*priv
= NULL
;
6251 IPW_DEBUG_INFO("enter\n");
6253 mem_start
= pci_resource_start(pci_dev
, 0);
6254 mem_len
= pci_resource_len(pci_dev
, 0);
6255 mem_flags
= pci_resource_flags(pci_dev
, 0);
6257 if ((mem_flags
& IORESOURCE_MEM
) != IORESOURCE_MEM
) {
6258 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6263 base_addr
= ioremap_nocache(mem_start
, mem_len
);
6265 printk(KERN_WARNING DRV_NAME
6266 "Error calling ioremap_nocache.\n");
6271 /* allocate and initialize our net_device */
6272 dev
= ipw2100_alloc_device(pci_dev
, base_addr
, mem_start
, mem_len
);
6274 printk(KERN_WARNING DRV_NAME
6275 "Error calling ipw2100_alloc_device.\n");
6280 /* set up PCI mappings for device */
6281 err
= pci_enable_device(pci_dev
);
6283 printk(KERN_WARNING DRV_NAME
6284 "Error calling pci_enable_device.\n");
6288 priv
= libipw_priv(dev
);
6290 pci_set_master(pci_dev
);
6291 pci_set_drvdata(pci_dev
, priv
);
6293 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6295 printk(KERN_WARNING DRV_NAME
6296 "Error calling pci_set_dma_mask.\n");
6297 pci_disable_device(pci_dev
);
6301 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6303 printk(KERN_WARNING DRV_NAME
6304 "Error calling pci_request_regions.\n");
6305 pci_disable_device(pci_dev
);
6309 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6310 * PCI Tx retries from interfering with C3 CPU state */
6311 pci_read_config_dword(pci_dev
, 0x40, &val
);
6312 if ((val
& 0x0000ff00) != 0)
6313 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6315 pci_set_power_state(pci_dev
, PCI_D0
);
6317 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6318 printk(KERN_WARNING DRV_NAME
6319 "Device not found via register read.\n");
6324 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6326 /* Force interrupts to be shut off on the device */
6327 priv
->status
|= STATUS_INT_ENABLED
;
6328 ipw2100_disable_interrupts(priv
);
6330 /* Allocate and initialize the Tx/Rx queues and lists */
6331 if (ipw2100_queues_allocate(priv
)) {
6332 printk(KERN_WARNING DRV_NAME
6333 "Error calling ipw2100_queues_allocate.\n");
6337 ipw2100_queues_initialize(priv
);
6339 err
= request_irq(pci_dev
->irq
,
6340 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6342 printk(KERN_WARNING DRV_NAME
6343 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6346 dev
->irq
= pci_dev
->irq
;
6348 IPW_DEBUG_INFO("Attempting to register device...\n");
6350 printk(KERN_INFO DRV_NAME
6351 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6353 /* Bring up the interface. Pre 0.46, after we registered the
6354 * network device we would call ipw2100_up. This introduced a race
6355 * condition with newer hotplug configurations (network was coming
6356 * up and making calls before the device was initialized).
6358 * If we called ipw2100_up before we registered the device, then the
6359 * device name wasn't registered. So, we instead use the net_dev->init
6360 * member to call a function that then just turns and calls ipw2100_up.
6361 * net_dev->init is called after name allocation but before the
6362 * notifier chain is called */
6363 err
= register_netdev(dev
);
6365 printk(KERN_WARNING DRV_NAME
6366 "Error calling register_netdev.\n");
6370 mutex_lock(&priv
->action_mutex
);
6373 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6375 /* perform this after register_netdev so that dev->name is set */
6376 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6380 /* If the RF Kill switch is disabled, go ahead and complete the
6381 * startup sequence */
6382 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6383 /* Enable the adapter - sends HOST_COMPLETE */
6384 if (ipw2100_enable_adapter(priv
)) {
6385 printk(KERN_WARNING DRV_NAME
6386 ": %s: failed in call to enable adapter.\n",
6387 priv
->net_dev
->name
);
6388 ipw2100_hw_stop_adapter(priv
);
6393 /* Start a scan . . . */
6394 ipw2100_set_scan_options(priv
);
6395 ipw2100_start_scan(priv
);
6398 IPW_DEBUG_INFO("exit\n");
6400 priv
->status
|= STATUS_INITIALIZED
;
6402 mutex_unlock(&priv
->action_mutex
);
6407 mutex_unlock(&priv
->action_mutex
);
6412 unregister_netdev(dev
);
6414 ipw2100_hw_stop_adapter(priv
);
6416 ipw2100_disable_interrupts(priv
);
6419 free_irq(dev
->irq
, priv
);
6421 ipw2100_kill_workqueue(priv
);
6423 /* These are safe to call even if they weren't allocated */
6424 ipw2100_queues_free(priv
);
6425 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6426 &ipw2100_attribute_group
);
6428 free_libipw(dev
, 0);
6429 pci_set_drvdata(pci_dev
, NULL
);
6435 pci_release_regions(pci_dev
);
6436 pci_disable_device(pci_dev
);
6441 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6443 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6444 struct net_device
*dev
;
6447 mutex_lock(&priv
->action_mutex
);
6449 priv
->status
&= ~STATUS_INITIALIZED
;
6451 dev
= priv
->net_dev
;
6452 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6453 &ipw2100_attribute_group
);
6456 if (ipw2100_firmware
.version
)
6457 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6459 /* Take down the hardware */
6462 /* Release the mutex so that the network subsystem can
6463 * complete any needed calls into the driver... */
6464 mutex_unlock(&priv
->action_mutex
);
6466 /* Unregister the device first - this results in close()
6467 * being called if the device is open. If we free storage
6468 * first, then close() will crash. */
6469 unregister_netdev(dev
);
6471 /* ipw2100_down will ensure that there is no more pending work
6472 * in the workqueue's, so we can safely remove them now. */
6473 ipw2100_kill_workqueue(priv
);
6475 ipw2100_queues_free(priv
);
6477 /* Free potential debugging firmware snapshot */
6478 ipw2100_snapshot_free(priv
);
6481 free_irq(dev
->irq
, priv
);
6484 iounmap((void __iomem
*)dev
->base_addr
);
6486 /* wiphy_unregister needs to be here, before free_libipw */
6487 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6488 kfree(priv
->ieee
->bg_band
.channels
);
6489 free_libipw(dev
, 0);
6492 pci_release_regions(pci_dev
);
6493 pci_disable_device(pci_dev
);
6495 IPW_DEBUG_INFO("exit\n");
6499 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6501 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6502 struct net_device
*dev
= priv
->net_dev
;
6504 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6506 mutex_lock(&priv
->action_mutex
);
6507 if (priv
->status
& STATUS_INITIALIZED
) {
6508 /* Take down the device; powers it off, etc. */
6512 /* Remove the PRESENT state of the device */
6513 netif_device_detach(dev
);
6515 pci_save_state(pci_dev
);
6516 pci_disable_device(pci_dev
);
6517 pci_set_power_state(pci_dev
, PCI_D3hot
);
6519 priv
->suspend_at
= get_seconds();
6521 mutex_unlock(&priv
->action_mutex
);
6526 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6528 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6529 struct net_device
*dev
= priv
->net_dev
;
6533 if (IPW2100_PM_DISABLED
)
6536 mutex_lock(&priv
->action_mutex
);
6538 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6540 pci_set_power_state(pci_dev
, PCI_D0
);
6541 err
= pci_enable_device(pci_dev
);
6543 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6545 mutex_unlock(&priv
->action_mutex
);
6548 pci_restore_state(pci_dev
);
6551 * Suspend/Resume resets the PCI configuration space, so we have to
6552 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6553 * from interfering with C3 CPU state. pci_restore_state won't help
6554 * here since it only restores the first 64 bytes pci config header.
6556 pci_read_config_dword(pci_dev
, 0x40, &val
);
6557 if ((val
& 0x0000ff00) != 0)
6558 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6560 /* Set the device back into the PRESENT state; this will also wake
6561 * the queue of needed */
6562 netif_device_attach(dev
);
6564 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6566 /* Bring the device back up */
6567 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6568 ipw2100_up(priv
, 0);
6570 mutex_unlock(&priv
->action_mutex
);
6576 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6578 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6580 /* Take down the device; powers it off, etc. */
6583 pci_disable_device(pci_dev
);
6586 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6588 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6589 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6590 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6591 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6592 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6593 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6594 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6595 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6596 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6597 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6598 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6599 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6600 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6601 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6603 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6604 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6605 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6606 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6607 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6609 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6610 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6611 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6612 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6613 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6614 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6615 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6617 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6619 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6620 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6621 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6622 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6623 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6624 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6625 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6627 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6628 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6629 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6630 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6631 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6632 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6634 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6638 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6640 static struct pci_driver ipw2100_pci_driver
= {
6642 .id_table
= ipw2100_pci_id_table
,
6643 .probe
= ipw2100_pci_init_one
,
6644 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6646 .suspend
= ipw2100_suspend
,
6647 .resume
= ipw2100_resume
,
6649 .shutdown
= ipw2100_shutdown
,
6653 * Initialize the ipw2100 driver/module
6655 * @returns 0 if ok, < 0 errno node con error.
6657 * Note: we cannot init the /proc stuff until the PCI driver is there,
6658 * or we risk an unlikely race condition on someone accessing
6659 * uninitialized data in the PCI dev struct through /proc.
6661 static int __init
ipw2100_init(void)
6665 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6666 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6668 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6669 PM_QOS_DEFAULT_VALUE
);
6671 ret
= pci_register_driver(&ipw2100_pci_driver
);
6675 #ifdef CONFIG_IPW2100_DEBUG
6676 ipw2100_debug_level
= debug
;
6677 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6678 &driver_attr_debug_level
);
6686 * Cleanup ipw2100 driver registration
6688 static void __exit
ipw2100_exit(void)
6690 /* FIXME: IPG: check that we have no instances of the devices open */
6691 #ifdef CONFIG_IPW2100_DEBUG
6692 driver_remove_file(&ipw2100_pci_driver
.driver
,
6693 &driver_attr_debug_level
);
6695 pci_unregister_driver(&ipw2100_pci_driver
);
6696 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6699 module_init(ipw2100_init
);
6700 module_exit(ipw2100_exit
);
6702 static int ipw2100_wx_get_name(struct net_device
*dev
,
6703 struct iw_request_info
*info
,
6704 union iwreq_data
*wrqu
, char *extra
)
6707 * This can be called at any time. No action lock required
6710 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6711 if (!(priv
->status
& STATUS_ASSOCIATED
))
6712 strcpy(wrqu
->name
, "unassociated");
6714 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6716 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6720 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6721 struct iw_request_info
*info
,
6722 union iwreq_data
*wrqu
, char *extra
)
6724 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6725 struct iw_freq
*fwrq
= &wrqu
->freq
;
6728 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6731 mutex_lock(&priv
->action_mutex
);
6732 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6737 /* if setting by freq convert to channel */
6739 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6740 int f
= fwrq
->m
/ 100000;
6743 while ((c
< REG_MAX_CHANNEL
) &&
6744 (f
!= ipw2100_frequencies
[c
]))
6747 /* hack to fall through */
6753 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6756 } else { /* Set the channel */
6757 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6758 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6762 mutex_unlock(&priv
->action_mutex
);
6766 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6767 struct iw_request_info
*info
,
6768 union iwreq_data
*wrqu
, char *extra
)
6771 * This can be called at any time. No action lock required
6774 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6778 /* If we are associated, trying to associate, or have a statically
6779 * configured CHANNEL then return that; otherwise return ANY */
6780 if (priv
->config
& CFG_STATIC_CHANNEL
||
6781 priv
->status
& STATUS_ASSOCIATED
)
6782 wrqu
->freq
.m
= priv
->channel
;
6786 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6791 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6792 struct iw_request_info
*info
,
6793 union iwreq_data
*wrqu
, char *extra
)
6795 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6798 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6800 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6803 mutex_lock(&priv
->action_mutex
);
6804 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6809 switch (wrqu
->mode
) {
6810 #ifdef CONFIG_IPW2100_MONITOR
6811 case IW_MODE_MONITOR
:
6812 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6814 #endif /* CONFIG_IPW2100_MONITOR */
6816 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6821 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6826 mutex_unlock(&priv
->action_mutex
);
6830 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6831 struct iw_request_info
*info
,
6832 union iwreq_data
*wrqu
, char *extra
)
6835 * This can be called at any time. No action lock required
6838 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6840 wrqu
->mode
= priv
->ieee
->iw_mode
;
6841 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6846 #define POWER_MODES 5
6848 /* Values are in microsecond */
6849 static const s32 timeout_duration
[POWER_MODES
] = {
6857 static const s32 period_duration
[POWER_MODES
] = {
6865 static int ipw2100_wx_get_range(struct net_device
*dev
,
6866 struct iw_request_info
*info
,
6867 union iwreq_data
*wrqu
, char *extra
)
6870 * This can be called at any time. No action lock required
6873 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6874 struct iw_range
*range
= (struct iw_range
*)extra
;
6878 wrqu
->data
.length
= sizeof(*range
);
6879 memset(range
, 0, sizeof(*range
));
6881 /* Let's try to keep this struct in the same order as in
6882 * linux/include/wireless.h
6885 /* TODO: See what values we can set, and remove the ones we can't
6886 * set, or fill them with some default data.
6889 /* ~5 Mb/s real (802.11b) */
6890 range
->throughput
= 5 * 1000 * 1000;
6892 // range->sensitivity; /* signal level threshold range */
6894 range
->max_qual
.qual
= 100;
6895 /* TODO: Find real max RSSI and stick here */
6896 range
->max_qual
.level
= 0;
6897 range
->max_qual
.noise
= 0;
6898 range
->max_qual
.updated
= 7; /* Updated all three */
6900 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6901 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6902 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6903 range
->avg_qual
.noise
= 0;
6904 range
->avg_qual
.updated
= 7; /* Updated all three */
6906 range
->num_bitrates
= RATE_COUNT
;
6908 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6909 range
->bitrate
[i
] = ipw2100_rates_11b
[i
];
6912 range
->min_rts
= MIN_RTS_THRESHOLD
;
6913 range
->max_rts
= MAX_RTS_THRESHOLD
;
6914 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6915 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6917 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6918 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6919 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6920 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6922 /* How to decode max/min PM period */
6923 range
->pmp_flags
= IW_POWER_PERIOD
;
6924 /* How to decode max/min PM period */
6925 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6926 /* What PM options are supported */
6927 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6929 range
->encoding_size
[0] = 5;
6930 range
->encoding_size
[1] = 13; /* Different token sizes */
6931 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6932 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6933 // range->encoding_login_index; /* token index for login token */
6935 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6936 range
->txpower_capa
= IW_TXPOW_DBM
;
6937 range
->num_txpower
= IW_MAX_TXPOWER
;
6938 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6941 ((IPW_TX_POWER_MAX_DBM
-
6942 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6943 range
->txpower
[i
] = level
/ 16;
6945 range
->txpower_capa
= 0;
6946 range
->num_txpower
= 0;
6949 /* Set the Wireless Extension versions */
6950 range
->we_version_compiled
= WIRELESS_EXT
;
6951 range
->we_version_source
= 18;
6953 // range->retry_capa; /* What retry options are supported */
6954 // range->retry_flags; /* How to decode max/min retry limit */
6955 // range->r_time_flags; /* How to decode max/min retry life */
6956 // range->min_retry; /* Minimal number of retries */
6957 // range->max_retry; /* Maximal number of retries */
6958 // range->min_r_time; /* Minimal retry lifetime */
6959 // range->max_r_time; /* Maximal retry lifetime */
6961 range
->num_channels
= FREQ_COUNT
;
6964 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6965 // TODO: Include only legal frequencies for some countries
6966 // if (local->channel_mask & (1 << i)) {
6967 range
->freq
[val
].i
= i
+ 1;
6968 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6969 range
->freq
[val
].e
= 1;
6972 if (val
== IW_MAX_FREQUENCIES
)
6975 range
->num_frequency
= val
;
6977 /* Event capability (kernel + driver) */
6978 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6979 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6980 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6982 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6983 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6985 IPW_DEBUG_WX("GET Range\n");
6990 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6991 struct iw_request_info
*info
,
6992 union iwreq_data
*wrqu
, char *extra
)
6994 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6997 static const unsigned char any
[] = {
6998 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
7000 static const unsigned char off
[] = {
7001 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
7005 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
7008 mutex_lock(&priv
->action_mutex
);
7009 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7014 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
7015 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
7016 /* we disable mandatory BSSID association */
7017 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7018 priv
->config
&= ~CFG_STATIC_BSSID
;
7019 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
7023 priv
->config
|= CFG_STATIC_BSSID
;
7024 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
7026 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
7028 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
7031 mutex_unlock(&priv
->action_mutex
);
7035 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7036 struct iw_request_info
*info
,
7037 union iwreq_data
*wrqu
, char *extra
)
7040 * This can be called at any time. No action lock required
7043 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7045 /* If we are associated, trying to associate, or have a statically
7046 * configured BSSID then return that; otherwise return ANY */
7047 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7048 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7049 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7051 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7053 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7057 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7058 struct iw_request_info
*info
,
7059 union iwreq_data
*wrqu
, char *extra
)
7061 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7062 char *essid
= ""; /* ANY */
7065 DECLARE_SSID_BUF(ssid
);
7067 mutex_lock(&priv
->action_mutex
);
7068 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7073 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7074 length
= wrqu
->essid
.length
;
7079 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7080 priv
->config
&= ~CFG_STATIC_ESSID
;
7081 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7085 length
= min(length
, IW_ESSID_MAX_SIZE
);
7087 priv
->config
|= CFG_STATIC_ESSID
;
7089 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7090 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7095 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7096 print_ssid(ssid
, essid
, length
), length
);
7098 priv
->essid_len
= length
;
7099 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7101 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7104 mutex_unlock(&priv
->action_mutex
);
7108 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7109 struct iw_request_info
*info
,
7110 union iwreq_data
*wrqu
, char *extra
)
7113 * This can be called at any time. No action lock required
7116 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7117 DECLARE_SSID_BUF(ssid
);
7119 /* If we are associated, trying to associate, or have a statically
7120 * configured ESSID then return that; otherwise return ANY */
7121 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7122 IPW_DEBUG_WX("Getting essid: '%s'\n",
7123 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7124 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7125 wrqu
->essid
.length
= priv
->essid_len
;
7126 wrqu
->essid
.flags
= 1; /* active */
7128 IPW_DEBUG_WX("Getting essid: ANY\n");
7129 wrqu
->essid
.length
= 0;
7130 wrqu
->essid
.flags
= 0; /* active */
7136 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7137 struct iw_request_info
*info
,
7138 union iwreq_data
*wrqu
, char *extra
)
7141 * This can be called at any time. No action lock required
7144 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7146 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7149 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7150 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7151 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7153 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7158 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7159 struct iw_request_info
*info
,
7160 union iwreq_data
*wrqu
, char *extra
)
7163 * This can be called at any time. No action lock required
7166 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7168 wrqu
->data
.length
= strlen(priv
->nick
);
7169 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7170 wrqu
->data
.flags
= 1; /* active */
7172 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7177 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7178 struct iw_request_info
*info
,
7179 union iwreq_data
*wrqu
, char *extra
)
7181 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7182 u32 target_rate
= wrqu
->bitrate
.value
;
7186 mutex_lock(&priv
->action_mutex
);
7187 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7194 if (target_rate
== 1000000 ||
7195 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7196 rate
|= TX_RATE_1_MBIT
;
7197 if (target_rate
== 2000000 ||
7198 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7199 rate
|= TX_RATE_2_MBIT
;
7200 if (target_rate
== 5500000 ||
7201 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7202 rate
|= TX_RATE_5_5_MBIT
;
7203 if (target_rate
== 11000000 ||
7204 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7205 rate
|= TX_RATE_11_MBIT
;
7207 rate
= DEFAULT_TX_RATES
;
7209 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7211 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7213 mutex_unlock(&priv
->action_mutex
);
7217 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7218 struct iw_request_info
*info
,
7219 union iwreq_data
*wrqu
, char *extra
)
7221 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7223 unsigned int len
= sizeof(val
);
7226 if (!(priv
->status
& STATUS_ENABLED
) ||
7227 priv
->status
& STATUS_RF_KILL_MASK
||
7228 !(priv
->status
& STATUS_ASSOCIATED
)) {
7229 wrqu
->bitrate
.value
= 0;
7233 mutex_lock(&priv
->action_mutex
);
7234 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7239 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7241 IPW_DEBUG_WX("failed querying ordinals.\n");
7245 switch (val
& TX_RATE_MASK
) {
7246 case TX_RATE_1_MBIT
:
7247 wrqu
->bitrate
.value
= 1000000;
7249 case TX_RATE_2_MBIT
:
7250 wrqu
->bitrate
.value
= 2000000;
7252 case TX_RATE_5_5_MBIT
:
7253 wrqu
->bitrate
.value
= 5500000;
7255 case TX_RATE_11_MBIT
:
7256 wrqu
->bitrate
.value
= 11000000;
7259 wrqu
->bitrate
.value
= 0;
7262 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7265 mutex_unlock(&priv
->action_mutex
);
7269 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7270 struct iw_request_info
*info
,
7271 union iwreq_data
*wrqu
, char *extra
)
7273 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7276 /* Auto RTS not yet supported */
7277 if (wrqu
->rts
.fixed
== 0)
7280 mutex_lock(&priv
->action_mutex
);
7281 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7286 if (wrqu
->rts
.disabled
)
7287 value
= priv
->rts_threshold
| RTS_DISABLED
;
7289 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7293 value
= wrqu
->rts
.value
;
7296 err
= ipw2100_set_rts_threshold(priv
, value
);
7298 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7300 mutex_unlock(&priv
->action_mutex
);
7304 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7305 struct iw_request_info
*info
,
7306 union iwreq_data
*wrqu
, char *extra
)
7309 * This can be called at any time. No action lock required
7312 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7314 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7315 wrqu
->rts
.fixed
= 1; /* no auto select */
7317 /* If RTS is set to the default value, then it is disabled */
7318 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7320 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7325 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7326 struct iw_request_info
*info
,
7327 union iwreq_data
*wrqu
, char *extra
)
7329 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7332 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7333 return -EINPROGRESS
;
7335 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7338 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7341 if (wrqu
->txpower
.fixed
== 0)
7342 value
= IPW_TX_POWER_DEFAULT
;
7344 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7345 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7348 value
= wrqu
->txpower
.value
;
7351 mutex_lock(&priv
->action_mutex
);
7352 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7357 err
= ipw2100_set_tx_power(priv
, value
);
7359 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7362 mutex_unlock(&priv
->action_mutex
);
7366 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7367 struct iw_request_info
*info
,
7368 union iwreq_data
*wrqu
, char *extra
)
7371 * This can be called at any time. No action lock required
7374 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7376 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7378 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7379 wrqu
->txpower
.fixed
= 0;
7380 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7382 wrqu
->txpower
.fixed
= 1;
7383 wrqu
->txpower
.value
= priv
->tx_power
;
7386 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7388 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7393 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7394 struct iw_request_info
*info
,
7395 union iwreq_data
*wrqu
, char *extra
)
7398 * This can be called at any time. No action lock required
7401 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7403 if (!wrqu
->frag
.fixed
)
7406 if (wrqu
->frag
.disabled
) {
7407 priv
->frag_threshold
|= FRAG_DISABLED
;
7408 priv
->ieee
->fts
= DEFAULT_FTS
;
7410 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7411 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7414 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7415 priv
->frag_threshold
= priv
->ieee
->fts
;
7418 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7423 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7424 struct iw_request_info
*info
,
7425 union iwreq_data
*wrqu
, char *extra
)
7428 * This can be called at any time. No action lock required
7431 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7432 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7433 wrqu
->frag
.fixed
= 0; /* no auto select */
7434 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7436 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7441 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7442 struct iw_request_info
*info
,
7443 union iwreq_data
*wrqu
, char *extra
)
7445 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7448 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7451 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7454 mutex_lock(&priv
->action_mutex
);
7455 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7460 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7461 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7462 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7467 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7468 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7469 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7474 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7476 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7478 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7481 mutex_unlock(&priv
->action_mutex
);
7485 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7486 struct iw_request_info
*info
,
7487 union iwreq_data
*wrqu
, char *extra
)
7490 * This can be called at any time. No action lock required
7493 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7495 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7497 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7500 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7501 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7502 wrqu
->retry
.value
= priv
->long_retry_limit
;
7505 (priv
->short_retry_limit
!=
7506 priv
->long_retry_limit
) ?
7507 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7509 wrqu
->retry
.value
= priv
->short_retry_limit
;
7512 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7517 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7518 struct iw_request_info
*info
,
7519 union iwreq_data
*wrqu
, char *extra
)
7521 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7524 mutex_lock(&priv
->action_mutex
);
7525 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7530 IPW_DEBUG_WX("Initiating scan...\n");
7532 priv
->user_requested_scan
= 1;
7533 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7534 IPW_DEBUG_WX("Start scan failed.\n");
7536 /* TODO: Mark a scan as pending so when hardware initialized
7541 mutex_unlock(&priv
->action_mutex
);
7545 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7546 struct iw_request_info
*info
,
7547 union iwreq_data
*wrqu
, char *extra
)
7550 * This can be called at any time. No action lock required
7553 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7554 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7558 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7560 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7561 struct iw_request_info
*info
,
7562 union iwreq_data
*wrqu
, char *key
)
7565 * No check of STATUS_INITIALIZED required
7568 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7569 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7572 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7573 struct iw_request_info
*info
,
7574 union iwreq_data
*wrqu
, char *key
)
7577 * This can be called at any time. No action lock required
7580 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7581 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7584 static int ipw2100_wx_set_power(struct net_device
*dev
,
7585 struct iw_request_info
*info
,
7586 union iwreq_data
*wrqu
, char *extra
)
7588 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7591 mutex_lock(&priv
->action_mutex
);
7592 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7597 if (wrqu
->power
.disabled
) {
7598 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7599 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7600 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7604 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7605 case IW_POWER_ON
: /* If not specified */
7606 case IW_POWER_MODE
: /* If set all mask */
7607 case IW_POWER_ALL_R
: /* If explicitly state all */
7609 default: /* Otherwise we don't support it */
7610 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7616 /* If the user hasn't specified a power management mode yet, default
7618 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7619 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7621 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7624 mutex_unlock(&priv
->action_mutex
);
7629 static int ipw2100_wx_get_power(struct net_device
*dev
,
7630 struct iw_request_info
*info
,
7631 union iwreq_data
*wrqu
, char *extra
)
7634 * This can be called at any time. No action lock required
7637 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7639 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7640 wrqu
->power
.disabled
= 1;
7642 wrqu
->power
.disabled
= 0;
7643 wrqu
->power
.flags
= 0;
7646 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7656 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7657 struct iw_request_info
*info
,
7658 union iwreq_data
*wrqu
, char *extra
)
7661 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7662 struct libipw_device
*ieee
= priv
->ieee
;
7665 if (!ieee
->wpa_enabled
)
7668 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7669 (wrqu
->data
.length
&& extra
== NULL
))
7672 if (wrqu
->data
.length
) {
7673 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7677 kfree(ieee
->wpa_ie
);
7679 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7681 kfree(ieee
->wpa_ie
);
7682 ieee
->wpa_ie
= NULL
;
7683 ieee
->wpa_ie_len
= 0;
7686 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7692 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7693 struct iw_request_info
*info
,
7694 union iwreq_data
*wrqu
, char *extra
)
7696 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7697 struct libipw_device
*ieee
= priv
->ieee
;
7699 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7700 wrqu
->data
.length
= 0;
7704 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7707 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7708 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7714 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7715 struct iw_request_info
*info
,
7716 union iwreq_data
*wrqu
, char *extra
)
7718 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7719 struct libipw_device
*ieee
= priv
->ieee
;
7720 struct iw_param
*param
= &wrqu
->param
;
7721 struct lib80211_crypt_data
*crypt
;
7722 unsigned long flags
;
7725 switch (param
->flags
& IW_AUTH_INDEX
) {
7726 case IW_AUTH_WPA_VERSION
:
7727 case IW_AUTH_CIPHER_PAIRWISE
:
7728 case IW_AUTH_CIPHER_GROUP
:
7729 case IW_AUTH_KEY_MGMT
:
7731 * ipw2200 does not use these parameters
7735 case IW_AUTH_TKIP_COUNTERMEASURES
:
7736 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7737 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7740 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7743 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7745 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7747 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7751 case IW_AUTH_DROP_UNENCRYPTED
:{
7754 * wpa_supplicant calls set_wpa_enabled when the driver
7755 * is loaded and unloaded, regardless of if WPA is being
7756 * used. No other calls are made which can be used to
7757 * determine if encryption will be used or not prior to
7758 * association being expected. If encryption is not being
7759 * used, drop_unencrypted is set to false, else true -- we
7760 * can use this to determine if the CAP_PRIVACY_ON bit should
7763 struct libipw_security sec
= {
7764 .flags
= SEC_ENABLED
,
7765 .enabled
= param
->value
,
7767 priv
->ieee
->drop_unencrypted
= param
->value
;
7768 /* We only change SEC_LEVEL for open mode. Others
7769 * are set by ipw_wpa_set_encryption.
7771 if (!param
->value
) {
7772 sec
.flags
|= SEC_LEVEL
;
7773 sec
.level
= SEC_LEVEL_0
;
7775 sec
.flags
|= SEC_LEVEL
;
7776 sec
.level
= SEC_LEVEL_1
;
7778 if (priv
->ieee
->set_security
)
7779 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7783 case IW_AUTH_80211_AUTH_ALG
:
7784 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7787 case IW_AUTH_WPA_ENABLED
:
7788 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7791 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7792 ieee
->ieee802_1x
= param
->value
;
7795 //case IW_AUTH_ROAMING_CONTROL:
7796 case IW_AUTH_PRIVACY_INVOKED
:
7797 ieee
->privacy_invoked
= param
->value
;
7807 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7808 struct iw_request_info
*info
,
7809 union iwreq_data
*wrqu
, char *extra
)
7811 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7812 struct libipw_device
*ieee
= priv
->ieee
;
7813 struct lib80211_crypt_data
*crypt
;
7814 struct iw_param
*param
= &wrqu
->param
;
7817 switch (param
->flags
& IW_AUTH_INDEX
) {
7818 case IW_AUTH_WPA_VERSION
:
7819 case IW_AUTH_CIPHER_PAIRWISE
:
7820 case IW_AUTH_CIPHER_GROUP
:
7821 case IW_AUTH_KEY_MGMT
:
7823 * wpa_supplicant will control these internally
7828 case IW_AUTH_TKIP_COUNTERMEASURES
:
7829 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7830 if (!crypt
|| !crypt
->ops
->get_flags
) {
7831 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7832 "crypt not set!\n");
7836 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7837 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7841 case IW_AUTH_DROP_UNENCRYPTED
:
7842 param
->value
= ieee
->drop_unencrypted
;
7845 case IW_AUTH_80211_AUTH_ALG
:
7846 param
->value
= priv
->ieee
->sec
.auth_mode
;
7849 case IW_AUTH_WPA_ENABLED
:
7850 param
->value
= ieee
->wpa_enabled
;
7853 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7854 param
->value
= ieee
->ieee802_1x
;
7857 case IW_AUTH_ROAMING_CONTROL
:
7858 case IW_AUTH_PRIVACY_INVOKED
:
7859 param
->value
= ieee
->privacy_invoked
;
7868 /* SIOCSIWENCODEEXT */
7869 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7870 struct iw_request_info
*info
,
7871 union iwreq_data
*wrqu
, char *extra
)
7873 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7874 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7877 /* SIOCGIWENCODEEXT */
7878 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7879 struct iw_request_info
*info
,
7880 union iwreq_data
*wrqu
, char *extra
)
7882 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7883 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7887 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7888 struct iw_request_info
*info
,
7889 union iwreq_data
*wrqu
, char *extra
)
7891 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7892 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7895 reason
= cpu_to_le16(mlme
->reason_code
);
7897 switch (mlme
->cmd
) {
7898 case IW_MLME_DEAUTH
:
7902 case IW_MLME_DISASSOC
:
7903 ipw2100_disassociate_bssid(priv
);
7917 #ifdef CONFIG_IPW2100_MONITOR
7918 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7919 struct iw_request_info
*info
,
7920 union iwreq_data
*wrqu
, char *extra
)
7922 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7923 int *parms
= (int *)extra
;
7924 int enable
= (parms
[0] > 0);
7927 mutex_lock(&priv
->action_mutex
);
7928 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7934 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7935 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7938 priv
->channel
= parms
[1];
7939 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7941 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7942 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7945 mutex_unlock(&priv
->action_mutex
);
7949 static int ipw2100_wx_reset(struct net_device
*dev
,
7950 struct iw_request_info
*info
,
7951 union iwreq_data
*wrqu
, char *extra
)
7953 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7954 if (priv
->status
& STATUS_INITIALIZED
)
7955 schedule_reset(priv
);
7961 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7962 struct iw_request_info
*info
,
7963 union iwreq_data
*wrqu
, char *extra
)
7965 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7966 int err
= 0, mode
= *(int *)extra
;
7968 mutex_lock(&priv
->action_mutex
);
7969 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7974 if ((mode
< 0) || (mode
> POWER_MODES
))
7975 mode
= IPW_POWER_AUTO
;
7977 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7978 err
= ipw2100_set_power_mode(priv
, mode
);
7980 mutex_unlock(&priv
->action_mutex
);
7984 #define MAX_POWER_STRING 80
7985 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7986 struct iw_request_info
*info
,
7987 union iwreq_data
*wrqu
, char *extra
)
7990 * This can be called at any time. No action lock required
7993 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7994 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7995 s32 timeout
, period
;
7997 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7998 snprintf(extra
, MAX_POWER_STRING
,
7999 "Power save level: %d (Off)", level
);
8002 case IPW_POWER_MODE_CAM
:
8003 snprintf(extra
, MAX_POWER_STRING
,
8004 "Power save level: %d (None)", level
);
8006 case IPW_POWER_AUTO
:
8007 snprintf(extra
, MAX_POWER_STRING
,
8008 "Power save level: %d (Auto)", level
);
8011 timeout
= timeout_duration
[level
- 1] / 1000;
8012 period
= period_duration
[level
- 1] / 1000;
8013 snprintf(extra
, MAX_POWER_STRING
,
8014 "Power save level: %d "
8015 "(Timeout %dms, Period %dms)",
8016 level
, timeout
, period
);
8020 wrqu
->data
.length
= strlen(extra
) + 1;
8025 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
8026 struct iw_request_info
*info
,
8027 union iwreq_data
*wrqu
, char *extra
)
8029 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8030 int err
, mode
= *(int *)extra
;
8032 mutex_lock(&priv
->action_mutex
);
8033 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8039 priv
->config
|= CFG_LONG_PREAMBLE
;
8041 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8047 err
= ipw2100_system_config(priv
, 0);
8050 mutex_unlock(&priv
->action_mutex
);
8054 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8055 struct iw_request_info
*info
,
8056 union iwreq_data
*wrqu
, char *extra
)
8059 * This can be called at any time. No action lock required
8062 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8064 if (priv
->config
& CFG_LONG_PREAMBLE
)
8065 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8067 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8072 #ifdef CONFIG_IPW2100_MONITOR
8073 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8074 struct iw_request_info
*info
,
8075 union iwreq_data
*wrqu
, char *extra
)
8077 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8078 int err
, mode
= *(int *)extra
;
8080 mutex_lock(&priv
->action_mutex
);
8081 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8087 priv
->config
|= CFG_CRC_CHECK
;
8089 priv
->config
&= ~CFG_CRC_CHECK
;
8097 mutex_unlock(&priv
->action_mutex
);
8101 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8102 struct iw_request_info
*info
,
8103 union iwreq_data
*wrqu
, char *extra
)
8106 * This can be called at any time. No action lock required
8109 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8111 if (priv
->config
& CFG_CRC_CHECK
)
8112 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8114 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8118 #endif /* CONFIG_IPW2100_MONITOR */
8120 static iw_handler ipw2100_wx_handlers
[] = {
8121 NULL
, /* SIOCSIWCOMMIT */
8122 ipw2100_wx_get_name
, /* SIOCGIWNAME */
8123 NULL
, /* SIOCSIWNWID */
8124 NULL
, /* SIOCGIWNWID */
8125 ipw2100_wx_set_freq
, /* SIOCSIWFREQ */
8126 ipw2100_wx_get_freq
, /* SIOCGIWFREQ */
8127 ipw2100_wx_set_mode
, /* SIOCSIWMODE */
8128 ipw2100_wx_get_mode
, /* SIOCGIWMODE */
8129 NULL
, /* SIOCSIWSENS */
8130 NULL
, /* SIOCGIWSENS */
8131 NULL
, /* SIOCSIWRANGE */
8132 ipw2100_wx_get_range
, /* SIOCGIWRANGE */
8133 NULL
, /* SIOCSIWPRIV */
8134 NULL
, /* SIOCGIWPRIV */
8135 NULL
, /* SIOCSIWSTATS */
8136 NULL
, /* SIOCGIWSTATS */
8137 NULL
, /* SIOCSIWSPY */
8138 NULL
, /* SIOCGIWSPY */
8139 NULL
, /* SIOCGIWTHRSPY */
8140 NULL
, /* SIOCWIWTHRSPY */
8141 ipw2100_wx_set_wap
, /* SIOCSIWAP */
8142 ipw2100_wx_get_wap
, /* SIOCGIWAP */
8143 ipw2100_wx_set_mlme
, /* SIOCSIWMLME */
8144 NULL
, /* SIOCGIWAPLIST -- deprecated */
8145 ipw2100_wx_set_scan
, /* SIOCSIWSCAN */
8146 ipw2100_wx_get_scan
, /* SIOCGIWSCAN */
8147 ipw2100_wx_set_essid
, /* SIOCSIWESSID */
8148 ipw2100_wx_get_essid
, /* SIOCGIWESSID */
8149 ipw2100_wx_set_nick
, /* SIOCSIWNICKN */
8150 ipw2100_wx_get_nick
, /* SIOCGIWNICKN */
8151 NULL
, /* -- hole -- */
8152 NULL
, /* -- hole -- */
8153 ipw2100_wx_set_rate
, /* SIOCSIWRATE */
8154 ipw2100_wx_get_rate
, /* SIOCGIWRATE */
8155 ipw2100_wx_set_rts
, /* SIOCSIWRTS */
8156 ipw2100_wx_get_rts
, /* SIOCGIWRTS */
8157 ipw2100_wx_set_frag
, /* SIOCSIWFRAG */
8158 ipw2100_wx_get_frag
, /* SIOCGIWFRAG */
8159 ipw2100_wx_set_txpow
, /* SIOCSIWTXPOW */
8160 ipw2100_wx_get_txpow
, /* SIOCGIWTXPOW */
8161 ipw2100_wx_set_retry
, /* SIOCSIWRETRY */
8162 ipw2100_wx_get_retry
, /* SIOCGIWRETRY */
8163 ipw2100_wx_set_encode
, /* SIOCSIWENCODE */
8164 ipw2100_wx_get_encode
, /* SIOCGIWENCODE */
8165 ipw2100_wx_set_power
, /* SIOCSIWPOWER */
8166 ipw2100_wx_get_power
, /* SIOCGIWPOWER */
8167 NULL
, /* -- hole -- */
8168 NULL
, /* -- hole -- */
8169 ipw2100_wx_set_genie
, /* SIOCSIWGENIE */
8170 ipw2100_wx_get_genie
, /* SIOCGIWGENIE */
8171 ipw2100_wx_set_auth
, /* SIOCSIWAUTH */
8172 ipw2100_wx_get_auth
, /* SIOCGIWAUTH */
8173 ipw2100_wx_set_encodeext
, /* SIOCSIWENCODEEXT */
8174 ipw2100_wx_get_encodeext
, /* SIOCGIWENCODEEXT */
8175 NULL
, /* SIOCSIWPMKSA */
8178 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8179 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8180 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8181 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8182 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8183 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8184 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8185 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8187 static const struct iw_priv_args ipw2100_private_args
[] = {
8189 #ifdef CONFIG_IPW2100_MONITOR
8191 IPW2100_PRIV_SET_MONITOR
,
8192 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8195 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8196 #endif /* CONFIG_IPW2100_MONITOR */
8199 IPW2100_PRIV_SET_POWER
,
8200 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8202 IPW2100_PRIV_GET_POWER
,
8203 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8206 IPW2100_PRIV_SET_LONGPREAMBLE
,
8207 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8209 IPW2100_PRIV_GET_LONGPREAMBLE
,
8210 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8211 #ifdef CONFIG_IPW2100_MONITOR
8213 IPW2100_PRIV_SET_CRC_CHECK
,
8214 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8216 IPW2100_PRIV_GET_CRC_CHECK
,
8217 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8218 #endif /* CONFIG_IPW2100_MONITOR */
8221 static iw_handler ipw2100_private_handler
[] = {
8222 #ifdef CONFIG_IPW2100_MONITOR
8223 ipw2100_wx_set_promisc
,
8225 #else /* CONFIG_IPW2100_MONITOR */
8228 #endif /* CONFIG_IPW2100_MONITOR */
8229 ipw2100_wx_set_powermode
,
8230 ipw2100_wx_get_powermode
,
8231 ipw2100_wx_set_preamble
,
8232 ipw2100_wx_get_preamble
,
8233 #ifdef CONFIG_IPW2100_MONITOR
8234 ipw2100_wx_set_crc_check
,
8235 ipw2100_wx_get_crc_check
,
8236 #else /* CONFIG_IPW2100_MONITOR */
8239 #endif /* CONFIG_IPW2100_MONITOR */
8243 * Get wireless statistics.
8244 * Called by /proc/net/wireless
8245 * Also called by SIOCGIWSTATS
8247 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8262 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8263 struct iw_statistics
*wstats
;
8264 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8265 u32 ord_len
= sizeof(u32
);
8268 return (struct iw_statistics
*)NULL
;
8270 wstats
= &priv
->wstats
;
8272 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8273 * ipw2100_wx_wireless_stats seems to be called before fw is
8274 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8275 * and associated; if not associcated, the values are all meaningless
8276 * anyway, so set them all to NULL and INVALID */
8277 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8278 wstats
->miss
.beacon
= 0;
8279 wstats
->discard
.retries
= 0;
8280 wstats
->qual
.qual
= 0;
8281 wstats
->qual
.level
= 0;
8282 wstats
->qual
.noise
= 0;
8283 wstats
->qual
.updated
= 7;
8284 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8285 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8289 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8290 &missed_beacons
, &ord_len
))
8291 goto fail_get_ordinal
;
8293 /* If we don't have a connection the quality and level is 0 */
8294 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8295 wstats
->qual
.qual
= 0;
8296 wstats
->qual
.level
= 0;
8298 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8300 goto fail_get_ordinal
;
8301 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8303 rssi_qual
= rssi
* POOR
/ 10;
8305 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8307 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8309 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8312 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8315 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8316 &tx_retries
, &ord_len
))
8317 goto fail_get_ordinal
;
8319 if (tx_retries
> 75)
8320 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8321 else if (tx_retries
> 70)
8322 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8323 else if (tx_retries
> 65)
8324 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8325 else if (tx_retries
> 50)
8326 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8329 tx_qual
= (50 - tx_retries
) *
8330 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8332 if (missed_beacons
> 50)
8333 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8334 else if (missed_beacons
> 40)
8335 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8337 else if (missed_beacons
> 32)
8338 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8340 else if (missed_beacons
> 20)
8341 beacon_qual
= (32 - missed_beacons
) *
8342 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8344 beacon_qual
= (20 - missed_beacons
) *
8345 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8347 quality
= min(tx_qual
, rssi_qual
);
8348 quality
= min(beacon_qual
, quality
);
8350 #ifdef CONFIG_IPW2100_DEBUG
8351 if (beacon_qual
== quality
)
8352 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8353 else if (tx_qual
== quality
)
8354 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8355 else if (quality
!= 100)
8356 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8358 IPW_DEBUG_WX("Quality not clamped.\n");
8361 wstats
->qual
.qual
= quality
;
8362 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8365 wstats
->qual
.noise
= 0;
8366 wstats
->qual
.updated
= 7;
8367 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8369 /* FIXME: this is percent and not a # */
8370 wstats
->miss
.beacon
= missed_beacons
;
8372 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8373 &tx_failures
, &ord_len
))
8374 goto fail_get_ordinal
;
8375 wstats
->discard
.retries
= tx_failures
;
8380 IPW_DEBUG_WX("failed querying ordinals.\n");
8382 return (struct iw_statistics
*)NULL
;
8385 static struct iw_handler_def ipw2100_wx_handler_def
= {
8386 .standard
= ipw2100_wx_handlers
,
8387 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8388 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8389 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8390 .private = (iw_handler
*) ipw2100_private_handler
,
8391 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8392 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8395 static void ipw2100_wx_event_work(struct work_struct
*work
)
8397 struct ipw2100_priv
*priv
=
8398 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8399 union iwreq_data wrqu
;
8400 unsigned int len
= ETH_ALEN
;
8402 if (priv
->status
& STATUS_STOPPING
)
8405 mutex_lock(&priv
->action_mutex
);
8407 IPW_DEBUG_WX("enter\n");
8409 mutex_unlock(&priv
->action_mutex
);
8411 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8413 /* Fetch BSSID from the hardware */
8414 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8415 priv
->status
& STATUS_RF_KILL_MASK
||
8416 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8417 &priv
->bssid
, &len
)) {
8418 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8420 /* We now have the BSSID, so can finish setting to the full
8421 * associated state */
8422 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8423 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8424 priv
->status
&= ~STATUS_ASSOCIATING
;
8425 priv
->status
|= STATUS_ASSOCIATED
;
8426 netif_carrier_on(priv
->net_dev
);
8427 netif_wake_queue(priv
->net_dev
);
8430 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8431 IPW_DEBUG_WX("Configuring ESSID\n");
8432 mutex_lock(&priv
->action_mutex
);
8433 /* This is a disassociation event, so kick the firmware to
8434 * look for another AP */
8435 if (priv
->config
& CFG_STATIC_ESSID
)
8436 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8439 ipw2100_set_essid(priv
, NULL
, 0, 0);
8440 mutex_unlock(&priv
->action_mutex
);
8443 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8446 #define IPW2100_FW_MAJOR_VERSION 1
8447 #define IPW2100_FW_MINOR_VERSION 3
8449 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8450 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8452 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8453 IPW2100_FW_MAJOR_VERSION)
8455 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8456 "." __stringify(IPW2100_FW_MINOR_VERSION)
8458 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8462 BINARY FIRMWARE HEADER FORMAT
8466 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8469 C fw_len firmware data
8470 12 + fw_len uc_len microcode data
8474 struct ipw2100_fw_header
{
8477 unsigned int fw_size
;
8478 unsigned int uc_size
;
8481 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8483 struct ipw2100_fw_header
*h
=
8484 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8486 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8487 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8488 "(detected version id of %u). "
8489 "See Documentation/networking/README.ipw2100\n",
8494 fw
->version
= h
->version
;
8495 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8496 fw
->fw
.size
= h
->fw_size
;
8497 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8498 fw
->uc
.size
= h
->uc_size
;
8503 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8504 struct ipw2100_fw
*fw
)
8509 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8510 priv
->net_dev
->name
);
8512 switch (priv
->ieee
->iw_mode
) {
8514 fw_name
= IPW2100_FW_NAME("-i");
8516 #ifdef CONFIG_IPW2100_MONITOR
8517 case IW_MODE_MONITOR
:
8518 fw_name
= IPW2100_FW_NAME("-p");
8523 fw_name
= IPW2100_FW_NAME("");
8527 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8530 printk(KERN_ERR DRV_NAME
": "
8531 "%s: Firmware '%s' not available or load failed.\n",
8532 priv
->net_dev
->name
, fw_name
);
8535 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8536 fw
->fw_entry
->size
);
8538 ipw2100_mod_firmware_load(fw
);
8543 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8544 #ifdef CONFIG_IPW2100_MONITOR
8545 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8547 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8549 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8550 struct ipw2100_fw
*fw
)
8554 release_firmware(fw
->fw_entry
);
8555 fw
->fw_entry
= NULL
;
8558 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8561 char ver
[MAX_FW_VERSION_LEN
];
8562 u32 len
= MAX_FW_VERSION_LEN
;
8565 /* firmware version is an ascii string (max len of 14) */
8566 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8571 for (i
= 0; i
< len
; i
++)
8577 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8581 u32 len
= sizeof(ver
);
8582 /* microcode version is a 32 bit integer */
8583 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8585 return snprintf(buf
, max
, "%08X", ver
);
8589 * On exit, the firmware will have been freed from the fw list
8591 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8593 /* firmware is constructed of N contiguous entries, each entry is
8597 * 0 4 address to write to
8598 * 4 2 length of data run
8604 const unsigned char *firmware_data
= fw
->fw
.data
;
8605 unsigned int firmware_data_left
= fw
->fw
.size
;
8607 while (firmware_data_left
> 0) {
8608 addr
= *(u32
*) (firmware_data
);
8610 firmware_data_left
-= 4;
8612 len
= *(u16
*) (firmware_data
);
8614 firmware_data_left
-= 2;
8617 printk(KERN_ERR DRV_NAME
": "
8618 "Invalid firmware run-length of %d bytes\n",
8623 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8624 firmware_data
+= len
;
8625 firmware_data_left
-= len
;
8631 struct symbol_alive_response
{
8640 u16 clock_settle_time
; // 1us LSB
8641 u16 powerup_settle_time
; // 1us LSB
8642 u16 hop_settle_time
; // 1us LSB
8643 u8 date
[3]; // month, day, year
8644 u8 time
[2]; // hours, minutes
8648 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8649 struct ipw2100_fw
*fw
)
8651 struct net_device
*dev
= priv
->net_dev
;
8652 const unsigned char *microcode_data
= fw
->uc
.data
;
8653 unsigned int microcode_data_left
= fw
->uc
.size
;
8654 void __iomem
*reg
= (void __iomem
*)dev
->base_addr
;
8656 struct symbol_alive_response response
;
8660 /* Symbol control */
8661 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8663 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8667 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8669 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8672 /* EN_CS_ACCESS bit to reset control store pointer */
8673 write_nic_byte(dev
, 0x210000, 0x40);
8675 write_nic_byte(dev
, 0x210000, 0x0);
8677 write_nic_byte(dev
, 0x210000, 0x40);
8680 /* copy microcode from buffer into Symbol */
8682 while (microcode_data_left
> 0) {
8683 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8684 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8685 microcode_data_left
-= 2;
8688 /* EN_CS_ACCESS bit to reset the control store pointer */
8689 write_nic_byte(dev
, 0x210000, 0x0);
8692 /* Enable System (Reg 0)
8693 * first enable causes garbage in RX FIFO */
8694 write_nic_byte(dev
, 0x210000, 0x0);
8696 write_nic_byte(dev
, 0x210000, 0x80);
8699 /* Reset External Baseband Reg */
8700 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8702 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8705 /* HW Config (Reg 5) */
8706 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8708 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8711 /* Enable System (Reg 0)
8712 * second enable should be OK */
8713 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8715 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8717 /* check Symbol is enabled - upped this from 5 as it wasn't always
8718 * catching the update */
8719 for (i
= 0; i
< 10; i
++) {
8722 /* check Dino is enabled bit */
8723 read_nic_byte(dev
, 0x210000, &data
);
8729 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8734 /* Get Symbol alive response */
8735 for (i
= 0; i
< 30; i
++) {
8736 /* Read alive response structure */
8738 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8739 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8741 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8747 printk(KERN_ERR DRV_NAME
8748 ": %s: No response from Symbol - hw not alive\n",
8750 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));