1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
34 #include <linux/interrupt.h>
35 #include <linux/kernel.h>
36 #include <linux/wait.h>
37 #include <linux/leds.h>
38 #include <linux/slab.h>
39 #include <net/ieee80211_radiotap.h>
41 #include "iwl-eeprom.h"
44 #include "iwl-debug.h"
45 #include "iwl-agn-hw.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49 #include "iwl-agn-tt.h"
51 #include "iwl-trans.h"
52 #include "iwl-shared.h"
56 /* CT-KILL constants */
57 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
58 #define CT_KILL_THRESHOLD 114 /* in Celsius */
59 #define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
61 /* Default noise level to report when noise measurement is not available.
62 * This may be because we're:
63 * 1) Not associated (4965, no beacon statistics being sent to driver)
64 * 2) Scanning (noise measurement does not apply to associated channel)
65 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
66 * Use default noise value of -127 ... this is below the range of measurable
67 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
68 * Also, -127 works better than 0 when averaging frames with/without
69 * noise info (e.g. averaging might be done in app); measured dBm values are
70 * always negative ... using a negative value as the default keeps all
71 * averages within an s8's (used in some apps) range of negative values. */
72 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
75 * RTS threshold here is total size [2347] minus 4 FCS bytes
77 * a value of 0 means RTS on all data/management packets
78 * a value > max MSDU size means no RTS
79 * else RTS for data/management frames where MPDU is larger
82 #define DEFAULT_RTS_THRESHOLD 2347U
83 #define MIN_RTS_THRESHOLD 0U
84 #define MAX_RTS_THRESHOLD 2347U
85 #define MAX_MSDU_SIZE 2304U
86 #define MAX_MPDU_SIZE 2346U
87 #define DEFAULT_BEACON_INTERVAL 200U
88 #define DEFAULT_SHORT_RETRY_LIMIT 7U
89 #define DEFAULT_LONG_RETRY_LIMIT 4U
91 #define IWL_NUM_SCAN_RATES (2)
94 * One for each channel, holds all channel setup data
95 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
98 struct iwl_channel_info
{
99 struct iwl_eeprom_channel eeprom
; /* EEPROM regulatory limit */
100 struct iwl_eeprom_channel ht40_eeprom
; /* EEPROM regulatory limit for
103 u8 channel
; /* channel number */
104 u8 flags
; /* flags copied from EEPROM */
105 s8 max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
106 s8 curr_txpow
; /* (dBm) regulatory/spectrum/user (not h/w) limit */
107 s8 min_power
; /* always 0 */
108 s8 scan_power
; /* (dBm) regul. eeprom, direct scans, any rate */
110 u8 group_index
; /* 0-4, maps channel to group1/2/3/4/5 */
111 u8 band_index
; /* 0-4, maps channel to band1/2/3/4/5 */
112 enum ieee80211_band band
;
114 /* HT40 channel info */
115 s8 ht40_max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
116 u8 ht40_flags
; /* flags copied from EEPROM */
117 u8 ht40_extension_channel
; /* HT_IE_EXT_CHANNEL_* */
121 * Minimum number of queues. MAX_NUM is defined in hw specific files.
122 * Set the minimum to accommodate
123 * - 4 standard TX queues
124 * - the command queue
126 * - the PAN multicast queue, and
127 * - the AUX (TX during scan dwell) queue.
129 #define IWL_MIN_NUM_QUEUES 11
132 * Command queue depends on iPAN support.
134 #define IWL_DEFAULT_CMD_QUEUE_NUM 4
135 #define IWL_IPAN_CMD_QUEUE_NUM 9
137 #define IEEE80211_DATA_LEN 2304
138 #define IEEE80211_4ADDR_LEN 30
139 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
140 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
142 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
143 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
144 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
146 #define IWL_SUPPORTED_RATES_IE_LEN 8
148 #define IWL_INVALID_RATE 0xFF
149 #define IWL_INVALID_VALUE -1
151 union iwl_ht_rate_supp
{
159 #define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
160 #define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
161 #define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
162 #define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
163 #define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
164 #define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
165 #define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
168 * Maximal MPDU density for TX aggregation
174 #define CFG_HT_MPDU_DENSITY_2USEC (0x4)
175 #define CFG_HT_MPDU_DENSITY_4USEC (0x5)
176 #define CFG_HT_MPDU_DENSITY_8USEC (0x6)
177 #define CFG_HT_MPDU_DENSITY_16USEC (0x7)
178 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
179 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
180 #define CFG_HT_MPDU_DENSITY_MIN (0x1)
182 struct iwl_ht_config
{
183 bool single_chain_sufficient
;
184 enum ieee80211_smps_mode smps
; /* current smps mode */
188 struct iwl_qos_info
{
190 struct iwl_qosparam_cmd def_qos_parm
;
194 * Structure should be accessed with sta_lock held. When station addition
195 * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
196 * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
199 struct iwl_station_entry
{
200 struct iwl_addsta_cmd sta
;
202 struct iwl_link_quality_cmd
*lq
;
206 * iwl_station_priv: Driver's private station information
208 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
209 * in the structure for use by driver. This structure is places in that
212 struct iwl_station_priv
{
213 struct iwl_rxon_context
*ctx
;
214 struct iwl_lq_sta lq_sta
;
215 atomic_t pending_frames
;
223 * struct iwl_vif_priv - driver's private per-interface information
225 * When mac80211 allocates a virtual interface, it can allocate
226 * space for us to put data into.
228 struct iwl_vif_priv
{
229 struct iwl_rxon_context
*ctx
;
230 u8 ibss_bssid_sta_id
;
233 /* one for each uCode image (inst/data, boot/init/runtime) */
235 void *v_addr
; /* access by driver */
236 dma_addr_t p_addr
; /* access by card's busmaster DMA */
241 struct fw_desc code
, data
;
244 /* v1/v2 uCode file layout */
245 struct iwl_ucode_header
{
246 __le32 ver
; /* major/minor/API/serial */
249 __le32 inst_size
; /* bytes of runtime code */
250 __le32 data_size
; /* bytes of runtime data */
251 __le32 init_size
; /* bytes of init code */
252 __le32 init_data_size
; /* bytes of init data */
253 __le32 boot_size
; /* bytes of bootstrap code */
254 u8 data
[0]; /* in same order as sizes */
257 __le32 build
; /* build number */
258 __le32 inst_size
; /* bytes of runtime code */
259 __le32 data_size
; /* bytes of runtime data */
260 __le32 init_size
; /* bytes of init code */
261 __le32 init_data_size
; /* bytes of init data */
262 __le32 boot_size
; /* bytes of bootstrap code */
263 u8 data
[0]; /* in same order as sizes */
269 * new TLV uCode file layout
271 * The new TLV file format contains TLVs, that each specify
272 * some piece of data. To facilitate "groups", for example
273 * different instruction image with different capabilities,
274 * bundled with the same init image, an alternative mechanism
276 * When the alternative field is 0, that means that the item
277 * is always valid. When it is non-zero, then it is only
278 * valid in conjunction with items of the same alternative,
279 * in which case the driver (user) selects one alternative
283 enum iwl_ucode_tlv_type
{
284 IWL_UCODE_TLV_INVALID
= 0, /* unused */
285 IWL_UCODE_TLV_INST
= 1,
286 IWL_UCODE_TLV_DATA
= 2,
287 IWL_UCODE_TLV_INIT
= 3,
288 IWL_UCODE_TLV_INIT_DATA
= 4,
289 IWL_UCODE_TLV_BOOT
= 5,
290 IWL_UCODE_TLV_PROBE_MAX_LEN
= 6, /* a u32 value */
291 IWL_UCODE_TLV_PAN
= 7,
292 IWL_UCODE_TLV_RUNT_EVTLOG_PTR
= 8,
293 IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
= 9,
294 IWL_UCODE_TLV_RUNT_ERRLOG_PTR
= 10,
295 IWL_UCODE_TLV_INIT_EVTLOG_PTR
= 11,
296 IWL_UCODE_TLV_INIT_EVTLOG_SIZE
= 12,
297 IWL_UCODE_TLV_INIT_ERRLOG_PTR
= 13,
298 IWL_UCODE_TLV_ENHANCE_SENS_TBL
= 14,
299 IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
= 15,
300 IWL_UCODE_TLV_WOWLAN_INST
= 16,
301 IWL_UCODE_TLV_WOWLAN_DATA
= 17,
302 IWL_UCODE_TLV_FLAGS
= 18,
306 * enum iwl_ucode_tlv_flag - ucode API flags
307 * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
308 * was a separate TLV but moved here to save space.
309 * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
310 * treats good CRC threshold as a boolean
311 * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
312 * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
314 enum iwl_ucode_tlv_flag
{
315 IWL_UCODE_TLV_FLAGS_PAN
= BIT(0),
316 IWL_UCODE_TLV_FLAGS_NEWSCAN
= BIT(1),
317 IWL_UCODE_TLV_FLAGS_MFP
= BIT(2),
318 IWL_UCODE_TLV_FLAGS_P2P
= BIT(3),
321 struct iwl_ucode_tlv
{
322 __le16 type
; /* see above */
323 __le16 alternative
; /* see comment */
324 __le32 length
; /* not including type/length fields */
328 #define IWL_TLV_UCODE_MAGIC 0x0a4c5749
330 struct iwl_tlv_ucode_header
{
332 * The TLV style ucode header is distinguished from
333 * the v1/v2 style header by first four bytes being
334 * zero, as such is an invalid combination of
335 * major/minor/API/serial versions.
339 u8 human_readable
[64];
340 __le32 ver
; /* major/minor/API/serial */
342 __le64 alternatives
; /* bitmask of valid alternatives */
344 * The data contained herein has a TLV layout,
345 * see above for the TLV header and types.
346 * Note that each TLV is padded to a length
347 * that is a multiple of 4 for alignment.
352 struct iwl_sensitivity_ranges
{
359 u16 auto_corr_min_ofdm
;
360 u16 auto_corr_min_ofdm_mrc
;
361 u16 auto_corr_min_ofdm_x1
;
362 u16 auto_corr_min_ofdm_mrc_x1
;
364 u16 auto_corr_max_ofdm
;
365 u16 auto_corr_max_ofdm_mrc
;
366 u16 auto_corr_max_ofdm_x1
;
367 u16 auto_corr_max_ofdm_mrc_x1
;
369 u16 auto_corr_max_cck
;
370 u16 auto_corr_max_cck_mrc
;
371 u16 auto_corr_min_cck
;
372 u16 auto_corr_min_cck_mrc
;
374 u16 barker_corr_th_min
;
375 u16 barker_corr_th_min_mrc
;
380 #define KELVIN_TO_CELSIUS(x) ((x)-273)
381 #define CELSIUS_TO_KELVIN(x) ((x)+273)
384 /******************************************************************************
386 * Functions implemented in core module which are forward declared here
387 * for use by iwl-[4-5].c
389 * NOTE: The implementation of these functions are not hardware specific
390 * which is why they are in the core module files.
392 * Naming convention --
393 * iwl_ <-- Is part of iwlwifi
394 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
396 ****************************************************************************/
397 extern void iwl_update_chain_flags(struct iwl_priv
*priv
);
398 extern const u8 iwl_bcast_addr
[ETH_ALEN
];
400 #define IWL_OPERATION_MODE_AUTO 0
401 #define IWL_OPERATION_MODE_HT_ONLY 1
402 #define IWL_OPERATION_MODE_MIXED 2
403 #define IWL_OPERATION_MODE_20MHZ 3
405 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
407 /* Sensitivity and chain noise calibration */
408 #define INITIALIZATION_VALUE 0xFFFF
409 #define IWL_CAL_NUM_BEACONS 16
410 #define MAXIMUM_ALLOWED_PATHLOSS 15
412 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
414 #define MAX_FA_OFDM 50
415 #define MIN_FA_OFDM 5
416 #define MAX_FA_CCK 50
419 #define AUTO_CORR_STEP_OFDM 1
421 #define AUTO_CORR_STEP_CCK 3
422 #define AUTO_CORR_MAX_TH_CCK 160
425 #define NRG_STEP_CCK 2
427 #define MAX_NUMBER_CCK_NO_FA 100
429 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
434 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
435 #define ALL_BAND_FILTER 0xFF00
436 #define IN_BAND_FILTER 0xFF
437 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
439 #define NRG_NUM_PREV_STAT_L 20
440 #define NUM_RX_CHAINS 3
442 enum iwlagn_false_alarm_state
{
445 IWL_FA_GOOD_RANGE
= 2,
448 enum iwlagn_chain_noise_state
{
449 IWL_CHAIN_NOISE_ALIVE
= 0, /* must be 0 */
450 IWL_CHAIN_NOISE_ACCUMULATE
,
451 IWL_CHAIN_NOISE_CALIBRATED
,
452 IWL_CHAIN_NOISE_DONE
,
458 * defines the order in which results of initial calibrations
459 * should be sent to the runtime uCode
466 IWL_CALIB_TX_IQ_PERD
,
468 IWL_CALIB_TEMP_OFFSET
,
472 /* Opaque calibration results */
473 struct iwl_calib_result
{
478 /* Sensitivity calib data */
479 struct iwl_sensitivity_data
{
481 u32 auto_corr_ofdm_mrc
;
482 u32 auto_corr_ofdm_x1
;
483 u32 auto_corr_ofdm_mrc_x1
;
485 u32 auto_corr_cck_mrc
;
487 u32 last_bad_plcp_cnt_ofdm
;
488 u32 last_fa_cnt_ofdm
;
489 u32 last_bad_plcp_cnt_cck
;
495 u8 nrg_silence_rssi
[NRG_NUM_PREV_STAT_L
];
500 s32 nrg_auto_corr_silence_diff
;
501 u32 num_in_cck_no_fa
;
504 u16 barker_corr_th_min
;
505 u16 barker_corr_th_min_mrc
;
509 /* Chain noise (differential Rx gain) calib data */
510 struct iwl_chain_noise_data
{
519 u8 disconn_array
[NUM_RX_CHAINS
];
520 u8 delta_gain_code
[NUM_RX_CHAINS
];
525 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
526 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
529 MEASUREMENT_READY
= (1 << 0),
530 MEASUREMENT_ACTIVE
= (1 << 1),
534 NVM_DEVICE_TYPE_EEPROM
= 0,
539 * Two types of OTP memory access modes
540 * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
541 * based on physical memory addressing
542 * IWL_OTP_ACCESS_RELATIVE - relative address mode,
543 * based on logical memory addressing
545 enum iwl_access_mode
{
546 IWL_OTP_ACCESS_ABSOLUTE
,
547 IWL_OTP_ACCESS_RELATIVE
,
551 * enum iwl_pa_type - Power Amplifier type
552 * @IWL_PA_SYSTEM: based on uCode configuration
553 * @IWL_PA_INTERNAL: use Internal only
560 /* reply_tx_statistics (for _agn devices) */
561 struct reply_tx_error_statistics
{
567 u32 int_crossed_retry
;
583 u32 sta_color_mismatch
;
587 /* reply_agg_tx_statistics (for _agn devices) */
588 struct reply_agg_tx_error_statistics
{
595 u32 last_sent_bt_kill
;
604 /* management statistics */
605 enum iwl_mgmt_stats
{
606 MANAGEMENT_ASSOC_REQ
= 0,
607 MANAGEMENT_ASSOC_RESP
,
608 MANAGEMENT_REASSOC_REQ
,
609 MANAGEMENT_REASSOC_RESP
,
610 MANAGEMENT_PROBE_REQ
,
611 MANAGEMENT_PROBE_RESP
,
620 /* control statistics */
621 enum iwl_ctrl_stats
{
622 CONTROL_BACK_REQ
= 0,
633 struct traffic_stats
{
634 #ifdef CONFIG_IWLWIFI_DEBUGFS
635 u32 mgmt
[MANAGEMENT_MAX
];
636 u32 ctrl
[CONTROL_MAX
];
643 * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
644 * to perform continuous uCode event logging operation if enabled
646 #define UCODE_TRACE_PERIOD (100)
649 * iwl_event_log: current uCode event log position
651 * @ucode_trace: enable/disable ucode continuous trace timer
652 * @num_wraps: how many times the event buffer wraps
653 * @next_entry: the entry just before the next one that uCode would fill
654 * @non_wraps_count: counter for no wrap detected when dump ucode events
655 * @wraps_once_count: counter for wrap once detected when dump ucode events
656 * @wraps_more_count: counter for wrap more than once detected
657 * when dump ucode events
659 struct iwl_event_log
{
664 int wraps_once_count
;
665 int wraps_more_count
;
669 * This is the threshold value of plcp error rate per 100mSecs. It is
670 * used to set and check for the validity of plcp_delta.
672 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (1)
673 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50)
674 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100)
675 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200)
676 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255)
677 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE (0)
679 #define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3)
680 #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
682 /* TX queue watchdog timeouts in mSecs */
683 #define IWL_DEF_WD_TIMEOUT (2000)
684 #define IWL_LONG_WD_TIMEOUT (10000)
685 #define IWL_MAX_WD_TIMEOUT (120000)
687 /* BT Antenna Coupling Threshold (dB) */
688 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35)
690 /* Firmware reload counter and Timestamp */
691 #define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */
692 #define IWL_MAX_CONTINUE_RELOAD_CNT 4
701 struct iwl_force_reset
{
702 int reset_request_count
;
703 int reset_success_count
;
704 int reset_reject_count
;
705 unsigned long reset_duration
;
706 unsigned long last_force_reset_jiffies
;
709 /* extend beacon time format bit shifting */
712 * bits 31:22 - extended
713 * bits 21:0 - interval
715 #define IWLAGN_EXT_BEACON_TIME_POS 22
718 * struct iwl_notification_wait - notification wait entry
719 * @list: list head for global list
720 * @fn: function called with the notification
723 * This structure is not used directly, to wait for a
724 * notification declare it on the stack, and call
725 * iwlagn_init_notification_wait() with appropriate
726 * parameters. Then do whatever will cause the ucode
727 * to notify the driver, and to wait for that then
728 * call iwlagn_wait_notification().
730 * Each notification is one-shot. If at some point we
731 * need to support multi-shot notifications (which
732 * can't be allocated on the stack) we need to modify
735 struct iwl_notification_wait
{
736 struct list_head list
;
738 void (*fn
)(struct iwl_priv
*priv
, struct iwl_rx_packet
*pkt
,
743 bool triggered
, aborted
;
746 struct iwl_rxon_context
{
747 struct ieee80211_vif
*vif
;
750 * We could use the vif to indicate active, but we
751 * also need it to be active during disabling when
752 * we already removed the vif for type setting.
754 bool always_active
, is_active
;
756 bool ht_need_multiple_chains
;
758 enum iwl_rxon_context_id ctxid
;
760 u32 interface_modes
, exclusive_interface_modes
;
761 u8 unused_devtype
, ap_devtype
, ibss_devtype
, station_devtype
;
764 * We declare this const so it can only be
765 * changed via explicit cast within the
766 * routines that actually update the physical
769 const struct iwl_rxon_cmd active
;
770 struct iwl_rxon_cmd staging
;
772 struct iwl_rxon_time_cmd timing
;
774 struct iwl_qos_info qos_data
;
776 u8 bcast_sta_id
, ap_sta_id
;
778 u8 rxon_cmd
, rxon_assoc_cmd
, rxon_timing_cmd
;
782 struct iwl_wep_key wep_keys
[WEP_KEYS_MAX
];
785 __le32 station_flags
;
790 bool non_gf_sta_present
;
792 bool enabled
, is_40mhz
;
793 u8 extension_chan_offset
;
799 bool last_tx_rejected
;
804 IWL_SCAN_RADIO_RESET
,
808 enum iwlagn_ucode_type
{
815 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
816 struct iwl_testmode_trace
{
829 /*data shared among all the driver's layers */
830 struct iwl_shared _shrd
;
831 struct iwl_shared
*shrd
;
833 /* ieee device used by generic ieee processing code */
834 struct ieee80211_hw
*hw
;
835 struct ieee80211_channel
*ieee_channels
;
836 struct ieee80211_rate
*ieee_rates
;
837 struct kmem_cache
*tx_cmd_pool
;
840 enum ieee80211_band band
;
842 void (*pre_rx_handler
)(struct iwl_priv
*priv
,
843 struct iwl_rx_mem_buffer
*rxb
);
844 int (*rx_handlers
[REPLY_MAX
])(struct iwl_priv
*priv
,
845 struct iwl_rx_mem_buffer
*rxb
,
846 struct iwl_device_cmd
*cmd
);
848 struct ieee80211_supported_band bands
[IEEE80211_NUM_BANDS
];
850 /* spectrum measurement report caching */
851 struct iwl_spectrum_notification measure_report
;
852 u8 measurement_status
;
854 /* ucode beacon time */
855 u32 ucode_beacon_time
;
856 int missed_beacon_threshold
;
858 /* track IBSS manager (last beacon) status */
861 /* jiffies when last recovery from statistics was performed */
862 unsigned long rx_statistics_jiffies
;
865 u32 rx_handlers_stats
[REPLY_MAX
];
868 struct iwl_force_reset force_reset
[IWL_MAX_FORCE_RESET
];
870 /* firmware reload counter and timestamp */
871 unsigned long reload_jiffies
;
874 /* we allocate array of iwl_channel_info for NIC's valid channels.
875 * Access via channel # using indirect index array */
876 struct iwl_channel_info
*channel_info
; /* channel info array */
877 u8 channel_count
; /* # of channels */
879 /* thermal calibration */
880 s32 temperature
; /* Celsius */
881 s32 last_temperature
;
883 /* init calibration results */
884 struct iwl_calib_result calib_results
[IWL_CALIB_MAX
];
886 /* Scan related variables */
887 unsigned long scan_start
;
888 unsigned long scan_start_tsf
;
890 enum ieee80211_band scan_band
;
891 struct cfg80211_scan_request
*scan_request
;
892 struct ieee80211_vif
*scan_vif
;
893 enum iwl_scan_type scan_type
;
894 u8 scan_tx_ant
[IEEE80211_NUM_BANDS
];
897 /* max number of station keys */
900 bool new_scan_threshold_behaviour
;
902 /* EEPROM MAC addresses */
903 struct mac_address addresses
[2];
905 /* uCode images, save to reload in case of failure */
906 int fw_index
; /* firmware we're trying to load */
907 u32 ucode_ver
; /* version of ucode, copy of
910 struct fw_img ucode_rt
;
911 struct fw_img ucode_init
;
912 struct fw_img ucode_wowlan
;
914 enum iwlagn_ucode_type ucode_type
;
915 u8 ucode_write_complete
; /* the image write is complete */
916 char firmware_name
[25];
918 struct iwl_rxon_context contexts
[NUM_IWL_RXON_CTX
];
920 __le16 switch_channel
;
923 u32 error_event_table
;
930 struct iwl_sensitivity_data sensitivity_data
;
931 struct iwl_chain_noise_data chain_noise_data
;
932 bool enhance_sensitivity_table
;
933 __le16 sensitivity_tbl
[HD_TABLE_SIZE
];
934 __le16 enhance_sensitivity_tbl
[ENHANCE_HD_TABLE_ENTRIES
];
936 struct iwl_ht_config current_ht_config
;
938 /* Rate scaling data */
941 int activity_timer_active
;
943 /* counts mgmt, ctl, and data packets */
944 struct traffic_stats tx_stats
;
945 struct traffic_stats rx_stats
;
947 struct iwl_power_mgr power_data
;
948 struct iwl_tt_mgmt thermal_throttle
;
950 /* station table variables */
952 struct iwl_station_entry stations
[IWLAGN_STATION_COUNT
];
953 unsigned long ucode_key_table
;
955 u8 mac80211_registered
;
957 /* Indication if ieee80211_ops->open has been called */
960 /* eeprom -- this is in the card's little endian byte order */
963 struct iwl_eeprom_calib_info
*calib_info
;
965 enum nl80211_iftype iw_mode
;
967 /* Last Rx'd beacon timestamp */
972 struct statistics_general_common common
;
973 struct statistics_rx_non_phy rx_non_phy
;
974 struct statistics_rx_phy rx_ofdm
;
975 struct statistics_rx_ht_phy rx_ofdm_ht
;
976 struct statistics_rx_phy rx_cck
;
977 struct statistics_tx tx
;
978 #ifdef CONFIG_IWLWIFI_DEBUGFS
979 struct statistics_bt_activity bt_activity
;
980 __le32 num_bt_kills
, accum_num_bt_kills
;
983 #ifdef CONFIG_IWLWIFI_DEBUGFS
985 struct statistics_general_common common
;
986 struct statistics_rx_non_phy rx_non_phy
;
987 struct statistics_rx_phy rx_ofdm
;
988 struct statistics_rx_ht_phy rx_ofdm_ht
;
989 struct statistics_rx_phy rx_cck
;
990 struct statistics_tx tx
;
991 struct statistics_bt_activity bt_activity
;
992 } accum_stats
, delta_stats
, max_delta_stats
;
996 * reporting the number of tids has AGG on. 0 means
1001 struct iwl_rx_phy_res last_phy_res
;
1002 bool last_phy_res_valid
;
1004 struct completion firmware_loading_complete
;
1006 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
1007 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
1010 * chain noise reset and gain commands are the
1011 * two extra calibration commands follows the standard
1012 * phy calibration commands
1014 u8 phy_calib_chain_noise_reset_cmd
;
1015 u8 phy_calib_chain_noise_gain_cmd
;
1017 /* counts reply_tx error */
1018 struct reply_tx_error_statistics reply_tx_stats
;
1019 struct reply_agg_tx_error_statistics reply_agg_tx_stats
;
1020 /* notification wait support */
1021 struct list_head notif_waits
;
1022 spinlock_t notif_wait_lock
;
1023 wait_queue_head_t notif_waitq
;
1025 /* remain-on-channel offload support */
1026 struct ieee80211_channel
*hw_roc_channel
;
1027 struct delayed_work hw_roc_disable_work
;
1028 enum nl80211_channel_type hw_roc_chantype
;
1029 int hw_roc_duration
;
1030 bool hw_roc_setup
, hw_roc_start_notified
;
1035 u8 bt_traffic_load
, last_bt_traffic_load
;
1036 bool bt_ch_announce
;
1037 bool bt_full_concurrent
;
1038 bool bt_ant_couple_ok
;
1039 __le32 kill_ack_mask
;
1040 __le32 kill_cts_mask
;
1044 u16 dynamic_frag_thresh
;
1045 u8 bt_ci_compliance
;
1046 struct work_struct bt_traffic_change_work
;
1047 bool bt_enable_pspoll
;
1048 struct iwl_rxon_context
*cur_rssi_ctx
;
1051 struct work_struct restart
;
1052 struct work_struct scan_completed
;
1053 struct work_struct abort_scan
;
1055 struct work_struct beacon_update
;
1056 struct iwl_rxon_context
*beacon_ctx
;
1057 struct sk_buff
*beacon_skb
;
1060 struct work_struct tt_work
;
1061 struct work_struct ct_enter
;
1062 struct work_struct ct_exit
;
1063 struct work_struct start_internal_scan
;
1064 struct work_struct tx_flush
;
1065 struct work_struct bt_full_concurrency
;
1066 struct work_struct bt_runtime_config
;
1068 struct delayed_work scan_check
;
1071 s8 tx_power_user_lmt
;
1072 s8 tx_power_device_lmt
;
1073 s8 tx_power_lmt_in_half_dbm
; /* max tx power in half-dBm format */
1076 #ifdef CONFIG_IWLWIFI_DEBUGFS
1082 struct dentry
*debugfs_dir
;
1083 u32 dbgfs_sram_offset
, dbgfs_sram_len
;
1086 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1088 struct work_struct txpower_work
;
1089 u32 disable_sens_cal
;
1090 u32 disable_chain_noise_cal
;
1091 struct work_struct run_time_calib_work
;
1092 struct timer_list statistics_periodic
;
1093 struct timer_list ucode_trace
;
1094 struct timer_list watchdog
;
1096 struct iwl_event_log event_log
;
1098 struct led_classdev led
;
1099 unsigned long blink_on
, blink_off
;
1100 bool led_registered
;
1101 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
1102 struct iwl_testmode_trace testmode_trace
;
1106 /* WoWLAN GTK rekey data */
1107 u8 kck
[NL80211_KCK_LEN
], kek
[NL80211_KEK_LEN
];
1109 __le16 last_seq_ctl
;
1110 bool have_rekey_data
;
1113 extern struct iwl_mod_params iwlagn_mod_params
;
1115 static inline struct iwl_rxon_context
*
1116 iwl_rxon_ctx_from_vif(struct ieee80211_vif
*vif
)
1118 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
1120 return vif_priv
->ctx
;
1123 #define for_each_context(priv, ctx) \
1124 for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \
1125 ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \
1126 if (priv->shrd->valid_contexts & BIT(ctx->ctxid))
1128 static inline int iwl_is_associated_ctx(struct iwl_rxon_context
*ctx
)
1130 return (ctx
->active
.filter_flags
& RXON_FILTER_ASSOC_MSK
) ? 1 : 0;
1133 static inline int iwl_is_associated(struct iwl_priv
*priv
,
1134 enum iwl_rxon_context_id ctxid
)
1136 return iwl_is_associated_ctx(&priv
->contexts
[ctxid
]);
1139 static inline int iwl_is_any_associated(struct iwl_priv
*priv
)
1141 struct iwl_rxon_context
*ctx
;
1142 for_each_context(priv
, ctx
)
1143 if (iwl_is_associated_ctx(ctx
))
1148 static inline int is_channel_valid(const struct iwl_channel_info
*ch_info
)
1150 if (ch_info
== NULL
)
1152 return (ch_info
->flags
& EEPROM_CHANNEL_VALID
) ? 1 : 0;
1155 static inline int is_channel_radar(const struct iwl_channel_info
*ch_info
)
1157 return (ch_info
->flags
& EEPROM_CHANNEL_RADAR
) ? 1 : 0;
1160 static inline u8
is_channel_a_band(const struct iwl_channel_info
*ch_info
)
1162 return ch_info
->band
== IEEE80211_BAND_5GHZ
;
1165 static inline u8
is_channel_bg_band(const struct iwl_channel_info
*ch_info
)
1167 return ch_info
->band
== IEEE80211_BAND_2GHZ
;
1170 static inline int is_channel_passive(const struct iwl_channel_info
*ch
)
1172 return (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
)) ? 1 : 0;
1175 static inline int is_channel_ibss(const struct iwl_channel_info
*ch
)
1177 return ((ch
->flags
& EEPROM_CHANNEL_IBSS
)) ? 1 : 0;
1180 #endif /* __iwl_dev_h__ */