rename DECLARE_PCI_DEVICE_TABLE to DEFINE_PCI_DEVICE_TABLE
[linux-2.6/kvm.git] / drivers / ssb / driver_pcicore.c
blob74b9a8aea52b12bbbf721a9c6f623ac2d09655b3
1 /*
2 * Sonics Silicon Backplane
3 * Broadcom PCI-core driver
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
8 * Licensed under the GNU/GPL. See COPYING for details.
9 */
11 #include <linux/ssb/ssb.h>
12 #include <linux/pci.h>
13 #include <linux/delay.h>
14 #include <linux/ssb/ssb_embedded.h>
16 #include "ssb_private.h"
19 static inline
20 u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
22 return ssb_read32(pc->dev, offset);
25 static inline
26 void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
28 ssb_write32(pc->dev, offset, value);
31 static inline
32 u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset)
34 return ssb_read16(pc->dev, offset);
37 static inline
38 void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value)
40 ssb_write16(pc->dev, offset, value);
43 /**************************************************
44 * Code for hostmode operation.
45 **************************************************/
47 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
49 #include <asm/paccess.h>
50 /* Probe a 32bit value on the bus and catch bus exceptions.
51 * Returns nonzero on a bus exception.
52 * This is MIPS specific */
53 #define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
55 /* Assume one-hot slot wiring */
56 #define SSB_PCI_SLOT_MAX 16
58 /* Global lock is OK, as we won't have more than one extpci anyway. */
59 static DEFINE_SPINLOCK(cfgspace_lock);
60 /* Core to access the external PCI config space. Can only have one. */
61 static struct ssb_pcicore *extpci_core;
63 static u32 ssb_pcicore_pcibus_iobase = 0x100;
64 static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
66 int pcibios_plat_dev_init(struct pci_dev *d)
68 struct resource *res;
69 int pos, size;
70 u32 *base;
72 ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
73 pci_name(d));
75 /* Fix up resource bases */
76 for (pos = 0; pos < 6; pos++) {
77 res = &d->resource[pos];
78 if (res->flags & IORESOURCE_IO)
79 base = &ssb_pcicore_pcibus_iobase;
80 else
81 base = &ssb_pcicore_pcibus_membase;
82 res->flags |= IORESOURCE_PCI_FIXED;
83 if (res->end) {
84 size = res->end - res->start + 1;
85 if (*base & (size - 1))
86 *base = (*base + size) & ~(size - 1);
87 res->start = *base;
88 res->end = res->start + size - 1;
89 *base += size;
90 pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
92 /* Fix up PCI bridge BAR0 only */
93 if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
94 break;
96 /* Fix up interrupt lines */
97 d->irq = ssb_mips_irq(extpci_core->dev) + 2;
98 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
100 return 0;
103 static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
105 u8 lat;
107 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
108 return;
110 ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
112 /* Enable PCI bridge bus mastering and memory space */
113 pci_set_master(dev);
114 if (pcibios_enable_device(dev, ~0) < 0) {
115 ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
116 return;
119 /* Enable PCI bridge BAR1 prefetch and burst */
120 pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
122 /* Make sure our latency is high enough to handle the devices behind us */
123 lat = 168;
124 ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
125 pci_name(dev), lat);
126 pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
128 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
130 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
132 return ssb_mips_irq(extpci_core->dev) + 2;
135 static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
136 unsigned int bus, unsigned int dev,
137 unsigned int func, unsigned int off)
139 u32 addr = 0;
140 u32 tmp;
142 /* We do only have one cardbus device behind the bridge. */
143 if (pc->cardbusmode && (dev >= 1))
144 goto out;
146 if (bus == 0) {
147 /* Type 0 transaction */
148 if (unlikely(dev >= SSB_PCI_SLOT_MAX))
149 goto out;
150 /* Slide the window */
151 tmp = SSB_PCICORE_SBTOPCI_CFG0;
152 tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK);
153 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp);
154 /* Calculate the address */
155 addr = SSB_PCI_CFG;
156 addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK);
157 addr |= (func << 8);
158 addr |= (off & ~3);
159 } else {
160 /* Type 1 transaction */
161 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
162 SSB_PCICORE_SBTOPCI_CFG1);
163 /* Calculate the address */
164 addr = SSB_PCI_CFG;
165 addr |= (bus << 16);
166 addr |= (dev << 11);
167 addr |= (func << 8);
168 addr |= (off & ~3);
170 out:
171 return addr;
174 static int ssb_extpci_read_config(struct ssb_pcicore *pc,
175 unsigned int bus, unsigned int dev,
176 unsigned int func, unsigned int off,
177 void *buf, int len)
179 int err = -EINVAL;
180 u32 addr, val;
181 void __iomem *mmio;
183 SSB_WARN_ON(!pc->hostmode);
184 if (unlikely(len != 1 && len != 2 && len != 4))
185 goto out;
186 addr = get_cfgspace_addr(pc, bus, dev, func, off);
187 if (unlikely(!addr))
188 goto out;
189 err = -ENOMEM;
190 mmio = ioremap_nocache(addr, len);
191 if (!mmio)
192 goto out;
194 if (mips_busprobe32(val, mmio)) {
195 val = 0xffffffff;
196 goto unmap;
199 val = readl(mmio);
200 val >>= (8 * (off & 3));
202 switch (len) {
203 case 1:
204 *((u8 *)buf) = (u8)val;
205 break;
206 case 2:
207 *((u16 *)buf) = (u16)val;
208 break;
209 case 4:
210 *((u32 *)buf) = (u32)val;
211 break;
213 err = 0;
214 unmap:
215 iounmap(mmio);
216 out:
217 return err;
220 static int ssb_extpci_write_config(struct ssb_pcicore *pc,
221 unsigned int bus, unsigned int dev,
222 unsigned int func, unsigned int off,
223 const void *buf, int len)
225 int err = -EINVAL;
226 u32 addr, val = 0;
227 void __iomem *mmio;
229 SSB_WARN_ON(!pc->hostmode);
230 if (unlikely(len != 1 && len != 2 && len != 4))
231 goto out;
232 addr = get_cfgspace_addr(pc, bus, dev, func, off);
233 if (unlikely(!addr))
234 goto out;
235 err = -ENOMEM;
236 mmio = ioremap_nocache(addr, len);
237 if (!mmio)
238 goto out;
240 if (mips_busprobe32(val, mmio)) {
241 val = 0xffffffff;
242 goto unmap;
245 switch (len) {
246 case 1:
247 val = readl(mmio);
248 val &= ~(0xFF << (8 * (off & 3)));
249 val |= *((const u8 *)buf) << (8 * (off & 3));
250 break;
251 case 2:
252 val = readl(mmio);
253 val &= ~(0xFFFF << (8 * (off & 3)));
254 val |= *((const u16 *)buf) << (8 * (off & 3));
255 break;
256 case 4:
257 val = *((const u32 *)buf);
258 break;
260 writel(val, mmio);
262 err = 0;
263 unmap:
264 iounmap(mmio);
265 out:
266 return err;
269 static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn,
270 int reg, int size, u32 *val)
272 unsigned long flags;
273 int err;
275 spin_lock_irqsave(&cfgspace_lock, flags);
276 err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn),
277 PCI_FUNC(devfn), reg, val, size);
278 spin_unlock_irqrestore(&cfgspace_lock, flags);
280 return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
283 static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn,
284 int reg, int size, u32 val)
286 unsigned long flags;
287 int err;
289 spin_lock_irqsave(&cfgspace_lock, flags);
290 err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn),
291 PCI_FUNC(devfn), reg, &val, size);
292 spin_unlock_irqrestore(&cfgspace_lock, flags);
294 return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
297 static struct pci_ops ssb_pcicore_pciops = {
298 .read = ssb_pcicore_read_config,
299 .write = ssb_pcicore_write_config,
302 static struct resource ssb_pcicore_mem_resource = {
303 .name = "SSB PCIcore external memory",
304 .start = SSB_PCI_DMA,
305 .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
306 .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED,
309 static struct resource ssb_pcicore_io_resource = {
310 .name = "SSB PCIcore external I/O",
311 .start = 0x100,
312 .end = 0x7FF,
313 .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED,
316 static struct pci_controller ssb_pcicore_controller = {
317 .pci_ops = &ssb_pcicore_pciops,
318 .io_resource = &ssb_pcicore_io_resource,
319 .mem_resource = &ssb_pcicore_mem_resource,
320 .mem_offset = 0x24000000,
323 static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
325 u32 val;
327 if (WARN_ON(extpci_core))
328 return;
329 extpci_core = pc;
331 ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
332 /* Reset devices on the external PCI bus */
333 val = SSB_PCICORE_CTL_RST_OE;
334 val |= SSB_PCICORE_CTL_CLK_OE;
335 pcicore_write32(pc, SSB_PCICORE_CTL, val);
336 val |= SSB_PCICORE_CTL_CLK; /* Clock on */
337 pcicore_write32(pc, SSB_PCICORE_CTL, val);
338 udelay(150); /* Assertion time demanded by the PCI standard */
339 val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
340 pcicore_write32(pc, SSB_PCICORE_CTL, val);
341 val = SSB_PCICORE_ARBCTL_INTERN;
342 pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
343 udelay(1); /* Assertion time demanded by the PCI standard */
345 if (pc->dev->bus->has_cardbus_slot) {
346 ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
347 pc->cardbusmode = 1;
348 /* GPIO 1 resets the bridge */
349 ssb_gpio_out(pc->dev->bus, 1, 1);
350 ssb_gpio_outen(pc->dev->bus, 1, 1);
351 pcicore_write16(pc, SSB_PCICORE_SPROM(0),
352 pcicore_read16(pc, SSB_PCICORE_SPROM(0))
353 | 0x0400);
356 /* 64MB I/O window */
357 pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
358 SSB_PCICORE_SBTOPCI_IO);
359 /* 64MB config space */
360 pcicore_write32(pc, SSB_PCICORE_SBTOPCI1,
361 SSB_PCICORE_SBTOPCI_CFG0);
362 /* 1GB memory window */
363 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
364 SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
366 /* Enable PCI bridge BAR0 prefetch and burst */
367 val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
368 ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
369 /* Clear error conditions */
370 val = 0;
371 ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2);
373 /* Enable PCI interrupts */
374 pcicore_write32(pc, SSB_PCICORE_IMASK,
375 SSB_PCICORE_IMASK_INTA);
377 /* Ok, ready to run, register it to the system.
378 * The following needs change, if we want to port hostmode
379 * to non-MIPS platform. */
380 ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000);
381 set_io_port_base(ssb_pcicore_controller.io_map_base);
382 /* Give some time to the PCI controller to configure itself with the new
383 * values. Not waiting at this point causes crashes of the machine. */
384 mdelay(10);
385 register_pci_controller(&ssb_pcicore_controller);
388 static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
390 struct ssb_bus *bus = pc->dev->bus;
391 u16 chipid_top;
392 u32 tmp;
394 chipid_top = (bus->chip_id & 0xFF00);
395 if (chipid_top != 0x4700 &&
396 chipid_top != 0x5300)
397 return 0;
399 if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
400 return 0;
402 /* The 200-pin BCM4712 package does not bond out PCI. Even when
403 * PCI is bonded out, some boards may leave the pins floating. */
404 if (bus->chip_id == 0x4712) {
405 if (bus->chip_package == SSB_CHIPPACK_BCM4712S)
406 return 0;
407 if (bus->chip_package == SSB_CHIPPACK_BCM4712M)
408 return 0;
410 if (bus->chip_id == 0x5350)
411 return 0;
413 return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
415 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
418 /**************************************************
419 * Generic and Clientmode operation code.
420 **************************************************/
422 static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
424 /* Disable PCI interrupts. */
425 ssb_write32(pc->dev, SSB_INTVEC, 0);
428 void ssb_pcicore_init(struct ssb_pcicore *pc)
430 struct ssb_device *dev = pc->dev;
431 struct ssb_bus *bus;
433 if (!dev)
434 return;
435 bus = dev->bus;
436 if (!ssb_device_is_enabled(dev))
437 ssb_device_enable(dev, 0);
439 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
440 pc->hostmode = pcicore_is_in_hostmode(pc);
441 if (pc->hostmode)
442 ssb_pcicore_init_hostmode(pc);
443 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
444 if (!pc->hostmode)
445 ssb_pcicore_init_clientmode(pc);
448 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
450 pcicore_write32(pc, 0x130, address);
451 return pcicore_read32(pc, 0x134);
454 static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data)
456 pcicore_write32(pc, 0x130, address);
457 pcicore_write32(pc, 0x134, data);
460 static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
461 u8 address, u16 data)
463 const u16 mdio_control = 0x128;
464 const u16 mdio_data = 0x12C;
465 u32 v;
466 int i;
468 v = 0x80; /* Enable Preamble Sequence */
469 v |= 0x2; /* MDIO Clock Divisor */
470 pcicore_write32(pc, mdio_control, v);
472 v = (1 << 30); /* Start of Transaction */
473 v |= (1 << 28); /* Write Transaction */
474 v |= (1 << 17); /* Turnaround */
475 v |= (u32)device << 22;
476 v |= (u32)address << 18;
477 v |= data;
478 pcicore_write32(pc, mdio_data, v);
479 /* Wait for the device to complete the transaction */
480 udelay(10);
481 for (i = 0; i < 10; i++) {
482 v = pcicore_read32(pc, mdio_control);
483 if (v & 0x100 /* Trans complete */)
484 break;
485 msleep(1);
487 pcicore_write32(pc, mdio_control, 0);
490 static void ssb_broadcast_value(struct ssb_device *dev,
491 u32 address, u32 data)
493 /* This is used for both, PCI and ChipCommon core, so be careful. */
494 BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR);
495 BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA);
497 ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address);
498 ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */
499 ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data);
500 ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */
503 static void ssb_commit_settings(struct ssb_bus *bus)
505 struct ssb_device *dev;
507 dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
508 if (WARN_ON(!dev))
509 return;
510 /* This forces an update of the cached registers. */
511 ssb_broadcast_value(dev, 0xFD8, 0);
514 int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
515 struct ssb_device *dev)
517 struct ssb_device *pdev = pc->dev;
518 struct ssb_bus *bus;
519 int err = 0;
520 u32 tmp;
522 might_sleep();
524 if (!pdev)
525 goto out;
526 bus = pdev->bus;
528 /* Enable interrupts for this device. */
529 if (bus->host_pci &&
530 ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
531 u32 coremask;
533 /* Calculate the "coremask" for the device. */
534 coremask = (1 << dev->core_index);
536 err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
537 if (err)
538 goto out;
539 tmp |= coremask << 8;
540 err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp);
541 if (err)
542 goto out;
543 } else {
544 u32 intvec;
546 intvec = ssb_read32(pdev, SSB_INTVEC);
547 if ((bus->chip_id & 0xFF00) == 0x4400) {
548 /* Workaround: On the BCM44XX the BPFLAG routing
549 * bit is wrong. Use a hardcoded constant. */
550 intvec |= 0x00000002;
551 } else {
552 tmp = ssb_read32(dev, SSB_TPSFLAG);
553 tmp &= SSB_TPSFLAG_BPFLAG;
554 intvec |= tmp;
556 ssb_write32(pdev, SSB_INTVEC, intvec);
559 /* Setup PCIcore operation. */
560 if (pc->setup_done)
561 goto out;
562 if (pdev->id.coreid == SSB_DEV_PCI) {
563 tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
564 tmp |= SSB_PCICORE_SBTOPCI_PREF;
565 tmp |= SSB_PCICORE_SBTOPCI_BURST;
566 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
568 if (pdev->id.revision < 5) {
569 tmp = ssb_read32(pdev, SSB_IMCFGLO);
570 tmp &= ~SSB_IMCFGLO_SERTO;
571 tmp |= 2;
572 tmp &= ~SSB_IMCFGLO_REQTO;
573 tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT;
574 ssb_write32(pdev, SSB_IMCFGLO, tmp);
575 ssb_commit_settings(bus);
576 } else if (pdev->id.revision >= 11) {
577 tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2);
578 tmp |= SSB_PCICORE_SBTOPCI_MRM;
579 pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
581 } else {
582 WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
583 //TODO: Better make defines for all these magic PCIE values.
584 if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
585 /* TLP Workaround register. */
586 tmp = ssb_pcie_read(pc, 0x4);
587 tmp |= 0x8;
588 ssb_pcie_write(pc, 0x4, tmp);
590 if (pdev->id.revision == 0) {
591 const u8 serdes_rx_device = 0x1F;
593 ssb_pcie_mdio_write(pc, serdes_rx_device,
594 2 /* Timer */, 0x8128);
595 ssb_pcie_mdio_write(pc, serdes_rx_device,
596 6 /* CDR */, 0x0100);
597 ssb_pcie_mdio_write(pc, serdes_rx_device,
598 7 /* CDR BW */, 0x1466);
599 } else if (pdev->id.revision == 1) {
600 /* DLLP Link Control register. */
601 tmp = ssb_pcie_read(pc, 0x100);
602 tmp |= 0x40;
603 ssb_pcie_write(pc, 0x100, tmp);
606 pc->setup_done = 1;
607 out:
608 return err;
610 EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable);