[PATCH] slab: extract slab_{put|get}_obj

[linux-2.6/kvm.git] / drivers / macintosh / windfarm_pm91.c

/*
 * Windfarm PowerMac thermal control. SMU based 1 CPU desktop control loops
 *
 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
 *                    <benh@kernel.crashing.org>
 *
 * Released under the term of the GNU GPL v2.
 *
 * The algorithm used is the PID control algorithm, used the same
 * way the published Darwin code does, using the same values that
 * are present in the Darwin 8.2 snapshot property lists (note however
 * that none of the code has been re-used, it's a complete re-implementation
 *
 * The various control loops found in Darwin config file are:
 *
 * PowerMac9,1
 * ===========
 *
 * Has 3 control loops: CPU fans is similar to PowerMac8,1 (though it doesn't
 * try to play with other control loops fans). Drive bay is rather basic PID
 * with one sensor and one fan. Slots area is a bit different as the Darwin
 * driver is supposed to be capable of working in a special "AGP" mode which
 * involves the presence of an AGP sensor and an AGP fan (possibly on the
 * AGP card itself). I can't deal with that special mode as I don't have
 * access to those additional sensor/fans for now (though ultimately, it would
 * be possible to add sensor objects for them) so I'm only implementing the
 * basic PCI slot control loop
 */

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/kmod.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/sections.h>
#include <asm/smu.h>

#include "windfarm.h"
#include "windfarm_pid.h"

#define VERSION "0.4"

#undef DEBUG

#ifdef DEBUG
#define DBG(args...)    printk(args)
#else
#define DBG(args...)    do { } while(0)
#endif

/* define this to force CPU overtemp to 74 degree, useful for testing
 * the overtemp code
 */
#undef HACKED_OVERTEMP

static struct device *wf_smu_dev;

/* Controls & sensors */
static struct wf_sensor *sensor_cpu_power;
static struct wf_sensor *sensor_cpu_temp;
static struct wf_sensor *sensor_hd_temp;
static struct wf_sensor *sensor_slots_power;
static struct wf_control *fan_cpu_main;
static struct wf_control *fan_cpu_second;
static struct wf_control *fan_cpu_third;
static struct wf_control *fan_hd;
static struct wf_control *fan_slots;
static struct wf_control *cpufreq_clamp;

/* Set to kick the control loop into life */
static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok, wf_smu_started;

/* Failure handling.. could be nicer */
#define FAILURE_FAN             0x01
#define FAILURE_SENSOR          0x02
#define FAILURE_OVERTEMP        0x04

static unsigned int wf_smu_failure_state;
static int wf_smu_readjust, wf_smu_skipping;

/*
 * ****** CPU Fans Control Loop ******
 *
 */


#define WF_SMU_CPU_FANS_INTERVAL        1
#define WF_SMU_CPU_FANS_MAX_HISTORY     16

/* State data used by the cpu fans control loop
 */
struct wf_smu_cpu_fans_state {
        int                     ticks;
        s32                     cpu_setpoint;
        struct wf_cpu_pid_state pid;
};

static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;



/*
 * ****** Drive Fan Control Loop ******
 *
 */

struct wf_smu_drive_fans_state {
        int                     ticks;
        s32                     setpoint;
        struct wf_pid_state     pid;
};

static struct wf_smu_drive_fans_state *wf_smu_drive_fans;

/*
 * ****** Slots Fan Control Loop ******
 *
 */

struct wf_smu_slots_fans_state {
        int                     ticks;
        s32                     setpoint;
        struct wf_pid_state     pid;
};

static struct wf_smu_slots_fans_state *wf_smu_slots_fans;

/*
 * ***** Implementation *****
 *
 */


static void wf_smu_create_cpu_fans(void)
{
        struct wf_cpu_pid_param pid_param;
        struct smu_sdbp_header *hdr;
        struct smu_sdbp_cpupiddata *piddata;
        struct smu_sdbp_fvt *fvt;
        s32 tmax, tdelta, maxpow, powadj;

        /* First, locate the PID params in SMU SBD */
        hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
        if (hdr == 0) {
                printk(KERN_WARNING "windfarm: CPU PID fan config not found "
                       "max fan speed\n");
                goto fail;
        }
        piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];

        /* Get the FVT params for operating point 0 (the only supported one
         * for now) in order to get tmax
         */
        hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
        if (hdr) {
                fvt = (struct smu_sdbp_fvt *)&hdr[1];
                tmax = ((s32)fvt->maxtemp) << 16;
        } else
                tmax = 0x5e0000; /* 94 degree default */

        /* Alloc & initialize state */
        wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
                                  GFP_KERNEL);
        if (wf_smu_cpu_fans == NULL)
                goto fail;
        wf_smu_cpu_fans->ticks = 1;

        /* Fill PID params */
        pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
        pid_param.history_len = piddata->history_len;
        if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
                printk(KERN_WARNING "windfarm: History size overflow on "
                       "CPU control loop (%d)\n", piddata->history_len);
                pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
        }
        pid_param.gd = piddata->gd;
        pid_param.gp = piddata->gp;
        pid_param.gr = piddata->gr / pid_param.history_len;

        tdelta = ((s32)piddata->target_temp_delta) << 16;
        maxpow = ((s32)piddata->max_power) << 16;
        powadj = ((s32)piddata->power_adj) << 16;

        pid_param.tmax = tmax;
        pid_param.ttarget = tmax - tdelta;
        pid_param.pmaxadj = maxpow - powadj;

        pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
        pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);

        wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);

        DBG("wf: CPU Fan control initialized.\n");
        DBG("    ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
            FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
            pid_param.min, pid_param.max);

        return;

 fail:
        printk(KERN_WARNING "windfarm: CPU fan config not found\n"
               "for this machine model, max fan speed\n");

        if (cpufreq_clamp)
                wf_control_set_max(cpufreq_clamp);
        if (fan_cpu_main)
                wf_control_set_max(fan_cpu_main);
}

static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
{
        s32 new_setpoint, temp, power;
        int rc;

        if (--st->ticks != 0) {
                if (wf_smu_readjust)
                        goto readjust;
                return;
        }
        st->ticks = WF_SMU_CPU_FANS_INTERVAL;

        rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
        if (rc) {
                printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
                       rc);
                wf_smu_failure_state |= FAILURE_SENSOR;
                return;
        }

        rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
        if (rc) {
                printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
                       rc);
                wf_smu_failure_state |= FAILURE_SENSOR;
                return;
        }

        DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
            FIX32TOPRINT(temp), FIX32TOPRINT(power));

#ifdef HACKED_OVERTEMP
        if (temp > 0x4a0000)
                wf_smu_failure_state |= FAILURE_OVERTEMP;
#else
        if (temp > st->pid.param.tmax)
                wf_smu_failure_state |= FAILURE_OVERTEMP;
#endif
        new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);

        DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);

        if (st->cpu_setpoint == new_setpoint)
                return;
        st->cpu_setpoint = new_setpoint;
 readjust:
        if (fan_cpu_main && wf_smu_failure_state == 0) {
                rc = fan_cpu_main->ops->set_value(fan_cpu_main,
                                                  st->cpu_setpoint);
                if (rc) {
                        printk(KERN_WARNING "windfarm: CPU main fan"
                               " error %d\n", rc);
                        wf_smu_failure_state |= FAILURE_FAN;
                }
        }
        if (fan_cpu_second && wf_smu_failure_state == 0) {
                rc = fan_cpu_second->ops->set_value(fan_cpu_second,
                                                    st->cpu_setpoint);
                if (rc) {
                        printk(KERN_WARNING "windfarm: CPU second fan"
                               " error %d\n", rc);
                        wf_smu_failure_state |= FAILURE_FAN;
                }
        }
        if (fan_cpu_third && wf_smu_failure_state == 0) {
                rc = fan_cpu_main->ops->set_value(fan_cpu_third,
                                                  st->cpu_setpoint);
                if (rc) {
                        printk(KERN_WARNING "windfarm: CPU third fan"
                               " error %d\n", rc);
                        wf_smu_failure_state |= FAILURE_FAN;
                }
        }
}

static void wf_smu_create_drive_fans(void)
{
        struct wf_pid_param param = {
                .interval       = 5,
                .history_len    = 2,
                .gd             = 0x01e00000,
                .gp             = 0x00500000,
                .gr             = 0x00000000,
                .itarget        = 0x00200000,
        };

        /* Alloc & initialize state */
        wf_smu_drive_fans = kmalloc(sizeof(struct wf_smu_drive_fans_state),
                                        GFP_KERNEL);
        if (wf_smu_drive_fans == NULL) {
                printk(KERN_WARNING "windfarm: Memory allocation error"
                       " max fan speed\n");
                goto fail;
        }
        wf_smu_drive_fans->ticks = 1;

        /* Fill PID params */
        param.additive = (fan_hd->type == WF_CONTROL_RPM_FAN);
        param.min = fan_hd->ops->get_min(fan_hd);
        param.max = fan_hd->ops->get_max(fan_hd);
        wf_pid_init(&wf_smu_drive_fans->pid, &param);

        DBG("wf: Drive Fan control initialized.\n");
        DBG("    itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
            FIX32TOPRINT(param.itarget), param.min, param.max);
        return;

 fail:
        if (fan_hd)
                wf_control_set_max(fan_hd);
}

static void wf_smu_drive_fans_tick(struct wf_smu_drive_fans_state *st)
{
        s32 new_setpoint, temp;
        int rc;

        if (--st->ticks != 0) {
                if (wf_smu_readjust)
                        goto readjust;
                return;
        }
        st->ticks = st->pid.param.interval;

        rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
        if (rc) {
                printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
                       rc);
                wf_smu_failure_state |= FAILURE_SENSOR;
                return;
        }

        DBG("wf_smu: Drive Fans tick ! HD temp: %d.%03d\n",
            FIX32TOPRINT(temp));

        if (temp > (st->pid.param.itarget + 0x50000))
                wf_smu_failure_state |= FAILURE_OVERTEMP;

        new_setpoint = wf_pid_run(&st->pid, temp);

        DBG("wf_smu: new_setpoint: %d\n", (int)new_setpoint);

        if (st->setpoint == new_setpoint)
                return;
        st->setpoint = new_setpoint;
 readjust:
        if (fan_hd && wf_smu_failure_state == 0) {
                rc = fan_hd->ops->set_value(fan_hd, st->setpoint);
                if (rc) {
                        printk(KERN_WARNING "windfarm: HD fan error %d\n",
                               rc);
                        wf_smu_failure_state |= FAILURE_FAN;
                }
        }
}

static void wf_smu_create_slots_fans(void)
{
        struct wf_pid_param param = {
                .interval       = 1,
                .history_len    = 8,
                .gd             = 0x00000000,
                .gp             = 0x00000000,
                .gr             = 0x00020000,
                .itarget        = 0x00000000
        };

        /* Alloc & initialize state */
        wf_smu_slots_fans = kmalloc(sizeof(struct wf_smu_slots_fans_state),
                                        GFP_KERNEL);
        if (wf_smu_slots_fans == NULL) {
                printk(KERN_WARNING "windfarm: Memory allocation error"
                       " max fan speed\n");
                goto fail;
        }
        wf_smu_slots_fans->ticks = 1;

        /* Fill PID params */
        param.additive = (fan_slots->type == WF_CONTROL_RPM_FAN);
        param.min = fan_slots->ops->get_min(fan_slots);
        param.max = fan_slots->ops->get_max(fan_slots);
        wf_pid_init(&wf_smu_slots_fans->pid, &param);

        DBG("wf: Slots Fan control initialized.\n");
        DBG("    itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
            FIX32TOPRINT(param.itarget), param.min, param.max);
        return;

 fail:
        if (fan_slots)
                wf_control_set_max(fan_slots);
}

static void wf_smu_slots_fans_tick(struct wf_smu_slots_fans_state *st)
{
        s32 new_setpoint, power;
        int rc;

        if (--st->ticks != 0) {
                if (wf_smu_readjust)
                        goto readjust;
                return;
        }
        st->ticks = st->pid.param.interval;

        rc = sensor_slots_power->ops->get_value(sensor_slots_power, &power);
        if (rc) {
                printk(KERN_WARNING "windfarm: Slots power sensor error %d\n",
                       rc);
                wf_smu_failure_state |= FAILURE_SENSOR;
                return;
        }

        DBG("wf_smu: Slots Fans tick ! Slots power: %d.%03d\n",
            FIX32TOPRINT(power));

#if 0 /* Check what makes a good overtemp condition */
        if (power > (st->pid.param.itarget + 0x50000))
                wf_smu_failure_state |= FAILURE_OVERTEMP;
#endif

        new_setpoint = wf_pid_run(&st->pid, power);

        DBG("wf_smu: new_setpoint: %d\n", (int)new_setpoint);

        if (st->setpoint == new_setpoint)
                return;
        st->setpoint = new_setpoint;
 readjust:
        if (fan_slots && wf_smu_failure_state == 0) {
                rc = fan_slots->ops->set_value(fan_slots, st->setpoint);
                if (rc) {
                        printk(KERN_WARNING "windfarm: Slots fan error %d\n",
                               rc);
                        wf_smu_failure_state |= FAILURE_FAN;
                }
        }
}


/*
 * ****** Attributes ******
 *
 */

#define BUILD_SHOW_FUNC_FIX(name, data)                         \
static ssize_t show_##name(struct device *dev,                  \
                           struct device_attribute *attr,       \
                           char *buf)                           \
{                                                               \
        ssize_t r;                                              \
        s32 val = 0;                                            \
        data->ops->get_value(data, &val);                       \
        r = sprintf(buf, "%d.%03d", FIX32TOPRINT(val));         \
        return r;                                               \
}                                                               \
static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);


#define BUILD_SHOW_FUNC_INT(name, data)                         \
static ssize_t show_##name(struct device *dev,                  \
                           struct device_attribute *attr,       \
                           char *buf)                           \
{                                                               \
        s32 val = 0;                                            \
        data->ops->get_value(data, &val);                       \
        return sprintf(buf, "%d", val);                         \
}                                                               \
static DEVICE_ATTR(name,S_IRUGO,show_##name, NULL);

BUILD_SHOW_FUNC_INT(cpu_fan, fan_cpu_main);
BUILD_SHOW_FUNC_INT(hd_fan, fan_hd);
BUILD_SHOW_FUNC_INT(slots_fan, fan_slots);

BUILD_SHOW_FUNC_FIX(cpu_temp, sensor_cpu_temp);
BUILD_SHOW_FUNC_FIX(cpu_power, sensor_cpu_power);
BUILD_SHOW_FUNC_FIX(hd_temp, sensor_hd_temp);
BUILD_SHOW_FUNC_FIX(slots_power, sensor_slots_power);

/*
 * ****** Setup / Init / Misc ... ******
 *
 */

static void wf_smu_tick(void)
{
        unsigned int last_failure = wf_smu_failure_state;
        unsigned int new_failure;

        if (!wf_smu_started) {
                DBG("wf: creating control loops !\n");
                wf_smu_create_drive_fans();
                wf_smu_create_slots_fans();
                wf_smu_create_cpu_fans();
                wf_smu_started = 1;
        }

        /* Skipping ticks */
        if (wf_smu_skipping && --wf_smu_skipping)
                return;

        wf_smu_failure_state = 0;
        if (wf_smu_drive_fans)
                wf_smu_drive_fans_tick(wf_smu_drive_fans);
        if (wf_smu_slots_fans)
                wf_smu_slots_fans_tick(wf_smu_slots_fans);
        if (wf_smu_cpu_fans)
                wf_smu_cpu_fans_tick(wf_smu_cpu_fans);

        wf_smu_readjust = 0;
        new_failure = wf_smu_failure_state & ~last_failure;

        /* If entering failure mode, clamp cpufreq and ramp all
         * fans to full speed.
         */
        if (wf_smu_failure_state && !last_failure) {
                if (cpufreq_clamp)
                        wf_control_set_max(cpufreq_clamp);
                if (fan_cpu_main)
                        wf_control_set_max(fan_cpu_main);
                if (fan_cpu_second)
                        wf_control_set_max(fan_cpu_second);
                if (fan_cpu_third)
                        wf_control_set_max(fan_cpu_third);
                if (fan_hd)
                        wf_control_set_max(fan_hd);
                if (fan_slots)
                        wf_control_set_max(fan_slots);
        }

        /* If leaving failure mode, unclamp cpufreq and readjust
         * all fans on next iteration
         */
        if (!wf_smu_failure_state && last_failure) {
                if (cpufreq_clamp)
                        wf_control_set_min(cpufreq_clamp);
                wf_smu_readjust = 1;
        }

        /* Overtemp condition detected, notify and start skipping a couple
         * ticks to let the temperature go down
         */
        if (new_failure & FAILURE_OVERTEMP) {
                wf_set_overtemp();
                wf_smu_skipping = 2;
        }

        /* We only clear the overtemp condition if overtemp is cleared
         * _and_ no other failure is present. Since a sensor error will
         * clear the overtemp condition (can't measure temperature) at
         * the control loop levels, but we don't want to keep it clear
         * here in this case
         */
        if (new_failure == 0 && last_failure & FAILURE_OVERTEMP)
                wf_clear_overtemp();
}


static void wf_smu_new_control(struct wf_control *ct)
{
        if (wf_smu_all_controls_ok)
                return;

        if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-rear-fan-0")) {
                if (wf_get_control(ct) == 0) {
                        fan_cpu_main = ct;
                        device_create_file(wf_smu_dev, &dev_attr_cpu_fan);
                }
        }

        if (fan_cpu_second == NULL && !strcmp(ct->name, "cpu-rear-fan-1")) {
                if (wf_get_control(ct) == 0)
                        fan_cpu_second = ct;
        }

        if (fan_cpu_third == NULL && !strcmp(ct->name, "cpu-front-fan-0")) {
                if (wf_get_control(ct) == 0)
                        fan_cpu_third = ct;
        }

        if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
                if (wf_get_control(ct) == 0)
                        cpufreq_clamp = ct;
        }

        if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
                if (wf_get_control(ct) == 0) {
                        fan_hd = ct;
                        device_create_file(wf_smu_dev, &dev_attr_hd_fan);
                }
        }

        if (fan_slots == NULL && !strcmp(ct->name, "slots-fan")) {
                if (wf_get_control(ct) == 0) {
                        fan_slots = ct;
                        device_create_file(wf_smu_dev, &dev_attr_slots_fan);
                }
        }

        if (fan_cpu_main && (fan_cpu_second || fan_cpu_third) && fan_hd &&
            fan_slots && cpufreq_clamp)
                wf_smu_all_controls_ok = 1;
}

static void wf_smu_new_sensor(struct wf_sensor *sr)
{
        if (wf_smu_all_sensors_ok)
                return;

        if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
                if (wf_get_sensor(sr) == 0) {
                        sensor_cpu_power = sr;
                        device_create_file(wf_smu_dev, &dev_attr_cpu_power);
                }
        }

        if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
                if (wf_get_sensor(sr) == 0) {
                        sensor_cpu_temp = sr;
                        device_create_file(wf_smu_dev, &dev_attr_cpu_temp);
                }
        }

        if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
                if (wf_get_sensor(sr) == 0) {
                        sensor_hd_temp = sr;
                        device_create_file(wf_smu_dev, &dev_attr_hd_temp);
                }
        }

        if (sensor_slots_power == NULL && !strcmp(sr->name, "slots-power")) {
                if (wf_get_sensor(sr) == 0) {
                        sensor_slots_power = sr;
                        device_create_file(wf_smu_dev, &dev_attr_slots_power);
                }
        }

        if (sensor_cpu_power && sensor_cpu_temp &&
            sensor_hd_temp && sensor_slots_power)
                wf_smu_all_sensors_ok = 1;
}


static int wf_smu_notify(struct notifier_block *self,
                               unsigned long event, void *data)
{
        switch(event) {
        case WF_EVENT_NEW_CONTROL:
                DBG("wf: new control %s detected\n",
                    ((struct wf_control *)data)->name);
                wf_smu_new_control(data);
                wf_smu_readjust = 1;
                break;
        case WF_EVENT_NEW_SENSOR:
                DBG("wf: new sensor %s detected\n",
                    ((struct wf_sensor *)data)->name);
                wf_smu_new_sensor(data);
                break;
        case WF_EVENT_TICK:
                if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
                        wf_smu_tick();
        }

        return 0;
}

static struct notifier_block wf_smu_events = {
        .notifier_call  = wf_smu_notify,
};

static int wf_init_pm(void)
{
        printk(KERN_INFO "windfarm: Initializing for Desktop G5 model\n");

        return 0;
}

static int wf_smu_probe(struct device *ddev)
{
        wf_smu_dev = ddev;

        wf_register_client(&wf_smu_events);

        return 0;
}

static int wf_smu_remove(struct device *ddev)
{
        wf_unregister_client(&wf_smu_events);

        /* XXX We don't have yet a guarantee that our callback isn't
         * in progress when returning from wf_unregister_client, so
         * we add an arbitrary delay. I'll have to fix that in the core
         */
        msleep(1000);

        /* Release all sensors */
        /* One more crappy race: I don't think we have any guarantee here
         * that the attribute callback won't race with the sensor beeing
         * disposed of, and I'm not 100% certain what best way to deal
         * with that except by adding locks all over... I'll do that
         * eventually but heh, who ever rmmod this module anyway ?
         */
        if (sensor_cpu_power) {
                device_remove_file(wf_smu_dev, &dev_attr_cpu_power);
                wf_put_sensor(sensor_cpu_power);
        }
        if (sensor_cpu_temp) {
                device_remove_file(wf_smu_dev, &dev_attr_cpu_temp);
                wf_put_sensor(sensor_cpu_temp);
        }
        if (sensor_hd_temp) {
                device_remove_file(wf_smu_dev, &dev_attr_hd_temp);
                wf_put_sensor(sensor_hd_temp);
        }
        if (sensor_slots_power) {
                device_remove_file(wf_smu_dev, &dev_attr_slots_power);
                wf_put_sensor(sensor_slots_power);
        }

        /* Release all controls */
        if (fan_cpu_main) {
                device_remove_file(wf_smu_dev, &dev_attr_cpu_fan);
                wf_put_control(fan_cpu_main);
        }
        if (fan_cpu_second)
                wf_put_control(fan_cpu_second);
        if (fan_cpu_third)
                wf_put_control(fan_cpu_third);
        if (fan_hd) {
                device_remove_file(wf_smu_dev, &dev_attr_hd_fan);
                wf_put_control(fan_hd);
        }
        if (fan_slots) {
                device_remove_file(wf_smu_dev, &dev_attr_slots_fan);
                wf_put_control(fan_slots);
        }
        if (cpufreq_clamp)
                wf_put_control(cpufreq_clamp);

        /* Destroy control loops state structures */
        if (wf_smu_slots_fans)
                kfree(wf_smu_cpu_fans);
        if (wf_smu_drive_fans)
                kfree(wf_smu_cpu_fans);
        if (wf_smu_cpu_fans)
                kfree(wf_smu_cpu_fans);

        wf_smu_dev = NULL;

        return 0;
}

static struct device_driver wf_smu_driver = {
        .name = "windfarm",
        .bus = &platform_bus_type,
        .probe = wf_smu_probe,
        .remove = wf_smu_remove,
};


static int __init wf_smu_init(void)
{
        int rc = -ENODEV;

        if (machine_is_compatible("PowerMac9,1"))
                rc = wf_init_pm();

        if (rc == 0) {
#ifdef MODULE
                request_module("windfarm_smu_controls");
                request_module("windfarm_smu_sensors");
                request_module("windfarm_lm75_sensor");

#endif /* MODULE */
                driver_register(&wf_smu_driver);
        }

        return rc;
}

static void __exit wf_smu_exit(void)
{

        driver_unregister(&wf_smu_driver);
}


module_init(wf_smu_init);
module_exit(wf_smu_exit);

MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("Thermal control logic for PowerMac9,1");
MODULE_LICENSE("GPL");