arch/powerpc/kernel/prom.c

   1 /*
   2  * Procedures for creating, accessing and interpreting the device tree.
   3  *
   4  * Paul Mackerras       August 1996.
   5  * Copyright (C) 1996-2005 Paul Mackerras.
   6  *
   7  *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
   8  *    {engebret|bergner}@us.ibm.com
   9  *
  10  *      This program is free software; you can redistribute it and/or
  11  *      modify it under the terms of the GNU General Public License
  12  *      as published by the Free Software Foundation; either version
  13  *      2 of the License, or (at your option) any later version.
  14  */
  15
  16 #undef DEBUG
  17
  18 #include <stdarg.h>
  19 #include <linux/kernel.h>
  20 #include <linux/string.h>
  21 #include <linux/init.h>
  22 #include <linux/threads.h>
  23 #include <linux/spinlock.h>
  24 #include <linux/types.h>
  25 #include <linux/pci.h>
  26 #include <linux/stringify.h>
  27 #include <linux/delay.h>
  28 #include <linux/initrd.h>
  29 #include <linux/bitops.h>
  30 #include <linux/module.h>
  31 #include <linux/kexec.h>
  32 #include <linux/debugfs.h>
  33 #include <linux/irq.h>
  34 #include <linux/memblock.h>
  35
  36 #include <asm/prom.h>
  37 #include <asm/rtas.h>
  38 #include <asm/page.h>
  39 #include <asm/processor.h>
  40 #include <asm/irq.h>
  41 #include <asm/io.h>
  42 #include <asm/kdump.h>
  43 #include <asm/smp.h>
  44 #include <asm/system.h>
  45 #include <asm/mmu.h>
  46 #include <asm/paca.h>
  47 #include <asm/pgtable.h>
  48 #include <asm/pci.h>
  49 #include <asm/iommu.h>
  50 #include <asm/btext.h>
  51 #include <asm/sections.h>
  52 #include <asm/machdep.h>
  53 #include <asm/pSeries_reconfig.h>
  54 #include <asm/pci-bridge.h>
  55 #include <asm/phyp_dump.h>
  56 #include <asm/kexec.h>
  57 #include <mm/mmu_decl.h>
  58
  59 #ifdef DEBUG
  60 #define DBG(fmt...) printk(KERN_ERR fmt)
  61 #else
  62 #define DBG(fmt...)
  63 #endif
  64
  65 #ifdef CONFIG_PPC64
  66 int __initdata iommu_is_off;
  67 int __initdata iommu_force_on;
  68 unsigned long tce_alloc_start, tce_alloc_end;
  69 u64 ppc64_rma_size;
  70 #endif
  71 static phys_addr_t first_memblock_size;
  72 static int __initdata boot_cpu_count;
  73
  74 static int __init early_parse_mem(char *p)
  75 {
  76         if (!p)
  77                 return 1;
  78
  79         memory_limit = PAGE_ALIGN(memparse(p, &p));
  80         DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
  81
  82         return 0;
  83 }
  84 early_param("mem", early_parse_mem);
  85
  86 /*
  87  * overlaps_initrd - check for overlap with page aligned extension of
  88  * initrd.
  89  */
  90 static inline int overlaps_initrd(unsigned long start, unsigned long size)
  91 {
  92 #ifdef CONFIG_BLK_DEV_INITRD
  93         if (!initrd_start)
  94                 return 0;
  95
  96         return  (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
  97                         start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
  98 #else
  99         return 0;
 100 #endif
 101 }
 102
 103 /**
 104  * move_device_tree - move tree to an unused area, if needed.
 105  *
 106  * The device tree may be allocated beyond our memory limit, or inside the
 107  * crash kernel region for kdump, or within the page aligned range of initrd.
 108  * If so, move it out of the way.
 109  */
 110 static void __init move_device_tree(void)
 111 {
 112         unsigned long start, size;
 113         void *p;
 114
 115         DBG("-> move_device_tree\n");
 116
 117         start = __pa(initial_boot_params);
 118         size = be32_to_cpu(initial_boot_params->totalsize);
 119
 120         if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
 121                         overlaps_crashkernel(start, size) ||
 122                         overlaps_initrd(start, size)) {
 123                 p = __va(memblock_alloc(size, PAGE_SIZE));
 124                 memcpy(p, initial_boot_params, size);
 125                 initial_boot_params = (struct boot_param_header *)p;
 126                 DBG("Moved device tree to 0x%p\n", p);
 127         }
 128
 129         DBG("<- move_device_tree\n");
 130 }
 131
 132 /*
 133  * ibm,pa-features is a per-cpu property that contains a string of
 134  * attribute descriptors, each of which has a 2 byte header plus up
 135  * to 254 bytes worth of processor attribute bits.  First header
 136  * byte specifies the number of bytes following the header.
 137  * Second header byte is an "attribute-specifier" type, of which
 138  * zero is the only currently-defined value.
 139  * Implementation:  Pass in the byte and bit offset for the feature
 140  * that we are interested in.  The function will return -1 if the
 141  * pa-features property is missing, or a 1/0 to indicate if the feature
 142  * is supported/not supported.  Note that the bit numbers are
 143  * big-endian to match the definition in PAPR.
 144  */
 145 static struct ibm_pa_feature {
 146         unsigned long   cpu_features;   /* CPU_FTR_xxx bit */
 147         unsigned long   mmu_features;   /* MMU_FTR_xxx bit */
 148         unsigned int    cpu_user_ftrs;  /* PPC_FEATURE_xxx bit */
 149         unsigned char   pabyte;         /* byte number in ibm,pa-features */
 150         unsigned char   pabit;          /* bit number (big-endian) */
 151         unsigned char   invert;         /* if 1, pa bit set => clear feature */
 152 } ibm_pa_features[] __initdata = {
 153         {0, 0, PPC_FEATURE_HAS_MMU,     0, 0, 0},
 154         {0, 0, PPC_FEATURE_HAS_FPU,     0, 1, 0},
 155         {0, MMU_FTR_SLB, 0,             0, 2, 0},
 156         {CPU_FTR_CTRL, 0, 0,            0, 3, 0},
 157         {CPU_FTR_NOEXECUTE, 0, 0,       0, 6, 0},
 158         {CPU_FTR_NODSISRALIGN, 0, 0,    1, 1, 1},
 159         {0, MMU_FTR_CI_LARGE_PAGE, 0,   1, 2, 0},
 160         {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
 161 };
 162
 163 static void __init scan_features(unsigned long node, unsigned char *ftrs,
 164                                  unsigned long tablelen,
 165                                  struct ibm_pa_feature *fp,
 166                                  unsigned long ft_size)
 167 {
 168         unsigned long i, len, bit;
 169
 170         /* find descriptor with type == 0 */
 171         for (;;) {
 172                 if (tablelen < 3)
 173                         return;
 174                 len = 2 + ftrs[0];
 175                 if (tablelen < len)
 176                         return;         /* descriptor 0 not found */
 177                 if (ftrs[1] == 0)
 178                         break;
 179                 tablelen -= len;
 180                 ftrs += len;
 181         }
 182
 183         /* loop over bits we know about */
 184         for (i = 0; i < ft_size; ++i, ++fp) {
 185                 if (fp->pabyte >= ftrs[0])
 186                         continue;
 187                 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
 188                 if (bit ^ fp->invert) {
 189                         cur_cpu_spec->cpu_features |= fp->cpu_features;
 190                         cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
 191                         cur_cpu_spec->mmu_features |= fp->mmu_features;
 192                 } else {
 193                         cur_cpu_spec->cpu_features &= ~fp->cpu_features;
 194                         cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
 195                         cur_cpu_spec->mmu_features &= ~fp->mmu_features;
 196                 }
 197         }
 198 }
 199
 200 static void __init check_cpu_pa_features(unsigned long node)
 201 {
 202         unsigned char *pa_ftrs;
 203         unsigned long tablelen;
 204
 205         pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
 206         if (pa_ftrs == NULL)
 207                 return;
 208
 209         scan_features(node, pa_ftrs, tablelen,
 210                       ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
 211 }
 212
 213 #ifdef CONFIG_PPC_STD_MMU_64
 214 static void __init check_cpu_slb_size(unsigned long node)
 215 {
 216         u32 *slb_size_ptr;
 217
 218         slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
 219         if (slb_size_ptr != NULL) {
 220                 mmu_slb_size = *slb_size_ptr;
 221                 return;
 222         }
 223         slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
 224         if (slb_size_ptr != NULL) {
 225                 mmu_slb_size = *slb_size_ptr;
 226         }
 227 }
 228 #else
 229 #define check_cpu_slb_size(node) do { } while(0)
 230 #endif
 231
 232 static struct feature_property {
 233         const char *name;
 234         u32 min_value;
 235         unsigned long cpu_feature;
 236         unsigned long cpu_user_ftr;
 237 } feature_properties[] __initdata = {
 238 #ifdef CONFIG_ALTIVEC
 239         {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 240         {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 241 #endif /* CONFIG_ALTIVEC */
 242 #ifdef CONFIG_VSX
 243         /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
 244         {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
 245 #endif /* CONFIG_VSX */
 246 #ifdef CONFIG_PPC64
 247         {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
 248         {"ibm,purr", 1, CPU_FTR_PURR, 0},
 249         {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
 250 #endif /* CONFIG_PPC64 */
 251 };
 252
 253 #if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
 254 static inline void identical_pvr_fixup(unsigned long node)
 255 {
 256         unsigned int pvr;
 257         char *model = of_get_flat_dt_prop(node, "model", NULL);
 258
 259         /*
 260          * Since 440GR(x)/440EP(x) processors have the same pvr,
 261          * we check the node path and set bit 28 in the cur_cpu_spec
 262          * pvr for EP(x) processor version. This bit is always 0 in
 263          * the "real" pvr. Then we call identify_cpu again with
 264          * the new logical pvr to enable FPU support.
 265          */
 266         if (model && strstr(model, "440EP")) {
 267                 pvr = cur_cpu_spec->pvr_value | 0x8;
 268                 identify_cpu(0, pvr);
 269                 DBG("Using logical pvr %x for %s\n", pvr, model);
 270         }
 271 }
 272 #else
 273 #define identical_pvr_fixup(node) do { } while(0)
 274 #endif
 275
 276 static void __init check_cpu_feature_properties(unsigned long node)
 277 {
 278         unsigned long i;
 279         struct feature_property *fp = feature_properties;
 280         const u32 *prop;
 281
 282         for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
 283                 prop = of_get_flat_dt_prop(node, fp->name, NULL);
 284                 if (prop && *prop >= fp->min_value) {
 285                         cur_cpu_spec->cpu_features |= fp->cpu_feature;
 286                         cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
 287                 }
 288         }
 289 }
 290
 291 static int __init early_init_dt_scan_cpus(unsigned long node,
 292                                           const char *uname, int depth,
 293                                           void *data)
 294 {
 295         char *type = of_get_flat_dt_prop(node, "device_type", NULL);
 296         const u32 *prop;
 297         const u32 *intserv;
 298         int i, nthreads;
 299         unsigned long len;
 300         int found = -1;
 301         int found_thread = 0;
 302
 303         /* We are scanning "cpu" nodes only */
 304         if (type == NULL || strcmp(type, "cpu") != 0)
 305                 return 0;
 306
 307         /* Get physical cpuid */
 308         intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
 309         if (intserv) {
 310                 nthreads = len / sizeof(int);
 311         } else {
 312                 intserv = of_get_flat_dt_prop(node, "reg", NULL);
 313                 nthreads = 1;
 314         }
 315
 316         /*
 317          * Now see if any of these threads match our boot cpu.
 318          * NOTE: This must match the parsing done in smp_setup_cpu_maps.
 319          */
 320         for (i = 0; i < nthreads; i++) {
 321                 /*
 322                  * version 2 of the kexec param format adds the phys cpuid of
 323                  * booted proc.
 324                  */
 325                 if (initial_boot_params->version >= 2) {
 326                         if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
 327                                 found = boot_cpu_count;
 328                                 found_thread = i;
 329                         }
 330                 } else {
 331                         /*
 332                          * Check if it's the boot-cpu, set it's hw index now,
 333                          * unfortunately this format did not support booting
 334                          * off secondary threads.
 335                          */
 336                         if (of_get_flat_dt_prop(node,
 337                                         "linux,boot-cpu", NULL) != NULL)
 338                                 found = boot_cpu_count;
 339                 }
 340 #ifdef CONFIG_SMP
 341                 /* logical cpu id is always 0 on UP kernels */
 342                 boot_cpu_count++;
 343 #endif
 344         }
 345
 346         if (found >= 0) {
 347                 DBG("boot cpu: logical %d physical %d\n", found,
 348                         intserv[found_thread]);
 349                 boot_cpuid = found;
 350                 set_hard_smp_processor_id(found, intserv[found_thread]);
 351
 352                 /*
 353                  * PAPR defines "logical" PVR values for cpus that
 354                  * meet various levels of the architecture:
 355                  * 0x0f000001   Architecture version 2.04
 356                  * 0x0f000002   Architecture version 2.05
 357                  * If the cpu-version property in the cpu node contains
 358                  * such a value, we call identify_cpu again with the
 359                  * logical PVR value in order to use the cpu feature
 360                  * bits appropriate for the architecture level.
 361                  *
 362                  * A POWER6 partition in "POWER6 architected" mode
 363                  * uses the 0x0f000002 PVR value; in POWER5+ mode
 364                  * it uses 0x0f000001.
 365                  */
 366                 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
 367                 if (prop && (*prop & 0xff000000) == 0x0f000000)
 368                         identify_cpu(0, *prop);
 369
 370                 identical_pvr_fixup(node);
 371         }
 372
 373         check_cpu_feature_properties(node);
 374         check_cpu_pa_features(node);
 375         check_cpu_slb_size(node);
 376
 377 #ifdef CONFIG_PPC_PSERIES
 378         if (nthreads > 1)
 379                 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
 380         else
 381                 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
 382 #endif
 383
 384         return 0;
 385 }
 386
 387 int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
 388                                          int depth, void *data)
 389 {
 390         unsigned long *lprop;
 391
 392         /* Use common scan routine to determine if this is the chosen node */
 393         if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
 394                 return 0;
 395
 396 #ifdef CONFIG_PPC64
 397         /* check if iommu is forced on or off */
 398         if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
 399                 iommu_is_off = 1;
 400         if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
 401                 iommu_force_on = 1;
 402 #endif
 403
 404         /* mem=x on the command line is the preferred mechanism */
 405         lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
 406         if (lprop)
 407                 memory_limit = *lprop;
 408
 409 #ifdef CONFIG_PPC64
 410         lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
 411         if (lprop)
 412                 tce_alloc_start = *lprop;
 413         lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
 414         if (lprop)
 415                 tce_alloc_end = *lprop;
 416 #endif
 417
 418 #ifdef CONFIG_KEXEC
 419         lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
 420         if (lprop)
 421                 crashk_res.start = *lprop;
 422
 423         lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
 424         if (lprop)
 425                 crashk_res.end = crashk_res.start + *lprop - 1;
 426 #endif
 427
 428         /* break now */
 429         return 1;
 430 }
 431
 432 #ifdef CONFIG_PPC_PSERIES
 433 /*
 434  * Interpret the ibm,dynamic-memory property in the
 435  * /ibm,dynamic-reconfiguration-memory node.
 436  * This contains a list of memory blocks along with NUMA affinity
 437  * information.
 438  */
 439 static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 440 {
 441         __be32 *dm, *ls, *usm;
 442         unsigned long l, n, flags;
 443         u64 base, size, memblock_size;
 444         unsigned int is_kexec_kdump = 0, rngs;
 445
 446         ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 447         if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 448                 return 0;
 449         memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 450
 451         dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
 452         if (dm == NULL || l < sizeof(__be32))
 453                 return 0;
 454
 455         n = *dm++;      /* number of entries */
 456         if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
 457                 return 0;
 458
 459         /* check if this is a kexec/kdump kernel. */
 460         usm = of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
 461                                                  &l);
 462         if (usm != NULL)
 463                 is_kexec_kdump = 1;
 464
 465         for (; n != 0; --n) {
 466                 base = dt_mem_next_cell(dt_root_addr_cells, &dm);
 467                 flags = dm[3];
 468                 /* skip DRC index, pad, assoc. list index, flags */
 469                 dm += 4;
 470                 /* skip this block if the reserved bit is set in flags (0x80)
 471                    or if the block is not assigned to this partition (0x8) */
 472                 if ((flags & 0x80) || !(flags & 0x8))
 473                         continue;
 474                 size = memblock_size;
 475                 rngs = 1;
 476                 if (is_kexec_kdump) {
 477                         /*
 478                          * For each memblock in ibm,dynamic-memory, a corresponding
 479                          * entry in linux,drconf-usable-memory property contains
 480                          * a counter 'p' followed by 'p' (base, size) duple.
 481                          * Now read the counter from
 482                          * linux,drconf-usable-memory property
 483                          */
 484                         rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
 485                         if (!rngs) /* there are no (base, size) duple */
 486                                 continue;
 487                 }
 488                 do {
 489                         if (is_kexec_kdump) {
 490                                 base = dt_mem_next_cell(dt_root_addr_cells,
 491                                                          &usm);
 492                                 size = dt_mem_next_cell(dt_root_size_cells,
 493                                                          &usm);
 494                         }
 495                         if (iommu_is_off) {
 496                                 if (base >= 0x80000000ul)
 497                                         continue;
 498                                 if ((base + size) > 0x80000000ul)
 499                                         size = 0x80000000ul - base;
 500                         }
 501                         memblock_add(base, size);
 502                 } while (--rngs);
 503         }
 504         memblock_dump_all();
 505         return 0;
 506 }
 507 #else
 508 #define early_init_dt_scan_drconf_memory(node)  0
 509 #endif /* CONFIG_PPC_PSERIES */
 510
 511 static int __init early_init_dt_scan_memory_ppc(unsigned long node,
 512                                                 const char *uname,
 513                                                 int depth, void *data)
 514 {
 515         if (depth == 1 &&
 516             strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
 517                 return early_init_dt_scan_drconf_memory(node);
 518
 519         return early_init_dt_scan_memory(node, uname, depth, data);
 520 }
 521
 522 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 523 {
 524 #ifdef CONFIG_PPC64
 525         if (iommu_is_off) {
 526                 if (base >= 0x80000000ul)
 527                         return;
 528                 if ((base + size) > 0x80000000ul)
 529                         size = 0x80000000ul - base;
 530         }
 531 #endif
 532         /* Keep track of the beginning of memory -and- the size of
 533          * the very first block in the device-tree as it represents
 534          * the RMA on ppc64 server
 535          */
 536         if (base < memstart_addr) {
 537                 memstart_addr = base;
 538                 first_memblock_size = size;
 539         }
 540
 541         /* Add the chunk to the MEMBLOCK list */
 542         memblock_add(base, size);
 543 }
 544
 545 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 546 {
 547         return __va(memblock_alloc(size, align));
 548 }
 549
 550 #ifdef CONFIG_BLK_DEV_INITRD
 551 void __init early_init_dt_setup_initrd_arch(unsigned long start,
 552                 unsigned long end)
 553 {
 554         initrd_start = (unsigned long)__va(start);
 555         initrd_end = (unsigned long)__va(end);
 556         initrd_below_start_ok = 1;
 557 }
 558 #endif
 559
 560 static void __init early_reserve_mem(void)
 561 {
 562         u64 base, size;
 563         u64 *reserve_map;
 564         unsigned long self_base;
 565         unsigned long self_size;
 566
 567         reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
 568                                         initial_boot_params->off_mem_rsvmap);
 569
 570         /* before we do anything, lets reserve the dt blob */
 571         self_base = __pa((unsigned long)initial_boot_params);
 572         self_size = initial_boot_params->totalsize;
 573         memblock_reserve(self_base, self_size);
 574
 575 #ifdef CONFIG_BLK_DEV_INITRD
 576         /* then reserve the initrd, if any */
 577         if (initrd_start && (initrd_end > initrd_start))
 578                 memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
 579                         _ALIGN_UP(initrd_end, PAGE_SIZE) -
 580                         _ALIGN_DOWN(initrd_start, PAGE_SIZE));
 581 #endif /* CONFIG_BLK_DEV_INITRD */
 582
 583 #ifdef CONFIG_PPC32
 584         /*
 585          * Handle the case where we might be booting from an old kexec
 586          * image that setup the mem_rsvmap as pairs of 32-bit values
 587          */
 588         if (*reserve_map > 0xffffffffull) {
 589                 u32 base_32, size_32;
 590                 u32 *reserve_map_32 = (u32 *)reserve_map;
 591
 592                 while (1) {
 593                         base_32 = *(reserve_map_32++);
 594                         size_32 = *(reserve_map_32++);
 595                         if (size_32 == 0)
 596                                 break;
 597                         /* skip if the reservation is for the blob */
 598                         if (base_32 == self_base && size_32 == self_size)
 599                                 continue;
 600                         DBG("reserving: %x -> %x\n", base_32, size_32);
 601                         memblock_reserve(base_32, size_32);
 602                 }
 603                 return;
 604         }
 605 #endif
 606         while (1) {
 607                 base = *(reserve_map++);
 608                 size = *(reserve_map++);
 609                 if (size == 0)
 610                         break;
 611                 DBG("reserving: %llx -> %llx\n", base, size);
 612                 memblock_reserve(base, size);
 613         }
 614 }
 615
 616 #ifdef CONFIG_PHYP_DUMP
 617 /**
 618  * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
 619  *
 620  * Function to find the largest size we need to reserve
 621  * during early boot process.
 622  *
 623  * It either looks for boot param and returns that OR
 624  * returns larger of 256 or 5% rounded down to multiples of 256MB.
 625  *
 626  */
 627 static inline unsigned long phyp_dump_calculate_reserve_size(void)
 628 {
 629         unsigned long tmp;
 630
 631         if (phyp_dump_info->reserve_bootvar)
 632                 return phyp_dump_info->reserve_bootvar;
 633
 634         /* divide by 20 to get 5% of value */
 635         tmp = memblock_end_of_DRAM();
 636         do_div(tmp, 20);
 637
 638         /* round it down in multiples of 256 */
 639         tmp = tmp & ~0x0FFFFFFFUL;
 640
 641         return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
 642 }
 643
 644 /**
 645  * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
 646  *
 647  * This routine may reserve memory regions in the kernel only
 648  * if the system is supported and a dump was taken in last
 649  * boot instance or if the hardware is supported and the
 650  * scratch area needs to be setup. In other instances it returns
 651  * without reserving anything. The memory in case of dump being
 652  * active is freed when the dump is collected (by userland tools).
 653  */
 654 static void __init phyp_dump_reserve_mem(void)
 655 {
 656         unsigned long base, size;
 657         unsigned long variable_reserve_size;
 658
 659         if (!phyp_dump_info->phyp_dump_configured) {
 660                 printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
 661                 return;
 662         }
 663
 664         if (!phyp_dump_info->phyp_dump_at_boot) {
 665                 printk(KERN_INFO "Phyp-dump disabled at boot time\n");
 666                 return;
 667         }
 668
 669         variable_reserve_size = phyp_dump_calculate_reserve_size();
 670
 671         if (phyp_dump_info->phyp_dump_is_active) {
 672                 /* Reserve *everything* above RMR.Area freed by userland tools*/
 673                 base = variable_reserve_size;
 674                 size = memblock_end_of_DRAM() - base;
 675
 676                 /* XXX crashed_ram_end is wrong, since it may be beyond
 677                  * the memory_limit, it will need to be adjusted. */
 678                 memblock_reserve(base, size);
 679
 680                 phyp_dump_info->init_reserve_start = base;
 681                 phyp_dump_info->init_reserve_size = size;
 682         } else {
 683                 size = phyp_dump_info->cpu_state_size +
 684                         phyp_dump_info->hpte_region_size +
 685                         variable_reserve_size;
 686                 base = memblock_end_of_DRAM() - size;
 687                 memblock_reserve(base, size);
 688                 phyp_dump_info->init_reserve_start = base;
 689                 phyp_dump_info->init_reserve_size = size;
 690         }
 691 }
 692 #else
 693 static inline void __init phyp_dump_reserve_mem(void) {}
 694 #endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
 695
 696 void __init early_init_devtree(void *params)
 697 {
 698         phys_addr_t limit;
 699
 700         DBG(" -> early_init_devtree(%p)\n", params);
 701
 702         /* Setup flat device-tree pointer */
 703         initial_boot_params = params;
 704
 705 #ifdef CONFIG_PPC_RTAS
 706         /* Some machines might need RTAS info for debugging, grab it now. */
 707         of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 708 #endif
 709
 710 #ifdef CONFIG_PHYP_DUMP
 711         /* scan tree to see if dump occurred during last boot */
 712         of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
 713 #endif
 714
 715         /* Retrieve various informations from the /chosen node of the
 716          * device-tree, including the platform type, initrd location and
 717          * size, TCE reserve, and more ...
 718          */
 719         of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
 720
 721         /* Scan memory nodes and rebuild MEMBLOCKs */
 722         memblock_init();
 723
 724         of_scan_flat_dt(early_init_dt_scan_root, NULL);
 725         of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 726         setup_initial_memory_limit(memstart_addr, first_memblock_size);
 727
 728         /* Save command line for /proc/cmdline and then parse parameters */
 729         strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 730         parse_early_param();
 731
 732         /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
 733         memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 734         /* If relocatable, reserve first 32k for interrupt vectors etc. */
 735         if (PHYSICAL_START > MEMORY_START)
 736                 memblock_reserve(MEMORY_START, 0x8000);
 737         reserve_kdump_trampoline();
 738         reserve_crashkernel();
 739         early_reserve_mem();
 740         phyp_dump_reserve_mem();
 741
 742         limit = memory_limit;
 743         if (! limit) {
 744                 phys_addr_t memsize;
 745
 746                 /* Ensure that total memory size is page-aligned, because
 747                  * otherwise mark_bootmem() gets upset. */
 748                 memblock_analyze();
 749                 memsize = memblock_phys_mem_size();
 750                 if ((memsize & PAGE_MASK) != memsize)
 751                         limit = memsize & PAGE_MASK;
 752         }
 753         memblock_enforce_memory_limit(limit);
 754
 755         memblock_analyze();
 756         memblock_dump_all();
 757
 758         DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 759
 760         /* We may need to relocate the flat tree, do it now.
 761          * FIXME .. and the initrd too? */
 762         move_device_tree();
 763
 764         allocate_pacas();
 765
 766         DBG("Scanning CPUs ...\n");
 767
 768         /* Retrieve CPU related informations from the flat tree
 769          * (altivec support, boot CPU ID, ...)
 770          */
 771         of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
 772
 773 #if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
 774         /* We'll later wait for secondaries to check in; there are
 775          * NCPUS-1 non-boot CPUs  :-)
 776          */
 777         spinning_secondaries = boot_cpu_count - 1;
 778 #endif
 779
 780         DBG(" <- early_init_devtree()\n");
 781 }
 782
 783 /*******
 784  *
 785  * New implementation of the OF "find" APIs, return a refcounted
 786  * object, call of_node_put() when done.  The device tree and list
 787  * are protected by a rw_lock.
 788  *
 789  * Note that property management will need some locking as well,
 790  * this isn't dealt with yet.
 791  *
 792  *******/
 793
 794 /**
 795  *      of_find_next_cache_node - Find a node's subsidiary cache
 796  *      @np:    node of type "cpu" or "cache"
 797  *
 798  *      Returns a node pointer with refcount incremented, use
 799  *      of_node_put() on it when done.  Caller should hold a reference
 800  *      to np.
 801  */
 802 struct device_node *of_find_next_cache_node(struct device_node *np)
 803 {
 804         struct device_node *child;
 805         const phandle *handle;
 806
 807         handle = of_get_property(np, "l2-cache", NULL);
 808         if (!handle)
 809                 handle = of_get_property(np, "next-level-cache", NULL);
 810
 811         if (handle)
 812                 return of_find_node_by_phandle(*handle);
 813
 814         /* OF on pmac has nodes instead of properties named "l2-cache"
 815          * beneath CPU nodes.
 816          */
 817         if (!strcmp(np->type, "cpu"))
 818                 for_each_child_of_node(np, child)
 819                         if (!strcmp(child->type, "cache"))
 820                                 return child;
 821
 822         return NULL;
 823 }
 824
 825 #ifdef CONFIG_PPC_PSERIES
 826 /*
 827  * Fix up the uninitialized fields in a new device node:
 828  * name, type and pci-specific fields
 829  */
 830
 831 static int of_finish_dynamic_node(struct device_node *node)
 832 {
 833         struct device_node *parent = of_get_parent(node);
 834         int err = 0;
 835         const phandle *ibm_phandle;
 836
 837         node->name = of_get_property(node, "name", NULL);
 838         node->type = of_get_property(node, "device_type", NULL);
 839
 840         if (!node->name)
 841                 node->name = "<NULL>";
 842         if (!node->type)
 843                 node->type = "<NULL>";
 844
 845         if (!parent) {
 846                 err = -ENODEV;
 847                 goto out;
 848         }
 849
 850         /* We don't support that function on PowerMac, at least
 851          * not yet
 852          */
 853         if (machine_is(powermac))
 854                 return -ENODEV;
 855
 856         /* fix up new node's phandle field */
 857         if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
 858                 node->phandle = *ibm_phandle;
 859
 860 out:
 861         of_node_put(parent);
 862         return err;
 863 }
 864
 865 static int prom_reconfig_notifier(struct notifier_block *nb,
 866                                   unsigned long action, void *node)
 867 {
 868         int err;
 869
 870         switch (action) {
 871         case PSERIES_RECONFIG_ADD:
 872                 err = of_finish_dynamic_node(node);
 873                 if (err < 0)
 874                         printk(KERN_ERR "finish_node returned %d\n", err);
 875                 break;
 876         default:
 877                 err = 0;
 878                 break;
 879         }
 880         return notifier_from_errno(err);
 881 }
 882
 883 static struct notifier_block prom_reconfig_nb = {
 884         .notifier_call = prom_reconfig_notifier,
 885         .priority = 10, /* This one needs to run first */
 886 };
 887
 888 static int __init prom_reconfig_setup(void)
 889 {
 890         return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
 891 }
 892 __initcall(prom_reconfig_setup);
 893 #endif
 894
 895 /* Find the device node for a given logical cpu number, also returns the cpu
 896  * local thread number (index in ibm,interrupt-server#s) if relevant and
 897  * asked for (non NULL)
 898  */
 899 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
 900 {
 901         int hardid;
 902         struct device_node *np;
 903
 904         hardid = get_hard_smp_processor_id(cpu);
 905
 906         for_each_node_by_type(np, "cpu") {
 907                 const u32 *intserv;
 908                 unsigned int plen, t;
 909
 910                 /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
 911                  * fallback to "reg" property and assume no threads
 912                  */
 913                 intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
 914                                 &plen);
 915                 if (intserv == NULL) {
 916                         const u32 *reg = of_get_property(np, "reg", NULL);
 917                         if (reg == NULL)
 918                                 continue;
 919                         if (*reg == hardid) {
 920                                 if (thread)
 921                                         *thread = 0;
 922                                 return np;
 923                         }
 924                 } else {
 925                         plen /= sizeof(u32);
 926                         for (t = 0; t < plen; t++) {
 927                                 if (hardid == intserv[t]) {
 928                                         if (thread)
 929                                                 *thread = t;
 930                                         return np;
 931                                 }
 932                         }
 933                 }
 934         }
 935         return NULL;
 936 }
 937 EXPORT_SYMBOL(of_get_cpu_node);
 938
 939 #if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
 940 static struct debugfs_blob_wrapper flat_dt_blob;
 941
 942 static int __init export_flat_device_tree(void)
 943 {
 944         struct dentry *d;
 945
 946         flat_dt_blob.data = initial_boot_params;
 947         flat_dt_blob.size = initial_boot_params->totalsize;
 948
 949         d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
 950                                 powerpc_debugfs_root, &flat_dt_blob);
 951         if (!d)
 952                 return 1;
 953
 954         return 0;
 955 }
 956 __initcall(export_flat_device_tree);
 957 #endif