Merge remote branch 'airlied/drm-next' into drm-intel-next
[linux-2.6/kvm.git] / drivers / gpu / drm / i915 / i915_drv.c
blob2fa217862058d849fe3b5723cf578297777cbe53
1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
2 */
3 /*
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
6 * All Rights Reserved.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
18 * of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
31 #include "drmP.h"
32 #include "drm.h"
33 #include "i915_drm.h"
34 #include "i915_drv.h"
36 #include "drm_pciids.h"
37 #include <linux/console.h>
38 #include "drm_crtc_helper.h"
40 static int i915_modeset = -1;
41 module_param_named(modeset, i915_modeset, int, 0400);
43 unsigned int i915_fbpercrtc = 0;
44 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
46 unsigned int i915_powersave = 1;
47 module_param_named(powersave, i915_powersave, int, 0400);
49 static struct drm_driver driver;
51 static struct pci_device_id pciidlist[] = {
52 i915_PCI_IDS
55 #if defined(CONFIG_DRM_I915_KMS)
56 MODULE_DEVICE_TABLE(pci, pciidlist);
57 #endif
59 static int i915_suspend(struct drm_device *dev, pm_message_t state)
61 struct drm_i915_private *dev_priv = dev->dev_private;
63 if (!dev || !dev_priv) {
64 DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
65 DRM_ERROR("DRM not initialized, aborting suspend.\n");
66 return -ENODEV;
69 if (state.event == PM_EVENT_PRETHAW)
70 return 0;
72 pci_save_state(dev->pdev);
74 /* If KMS is active, we do the leavevt stuff here */
75 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
76 if (i915_gem_idle(dev))
77 dev_err(&dev->pdev->dev,
78 "GEM idle failed, resume may fail\n");
79 drm_irq_uninstall(dev);
82 i915_save_state(dev);
84 intel_opregion_free(dev, 1);
86 if (state.event == PM_EVENT_SUSPEND) {
87 /* Shut down the device */
88 pci_disable_device(dev->pdev);
89 pci_set_power_state(dev->pdev, PCI_D3hot);
92 /* Modeset on resume, not lid events */
93 dev_priv->modeset_on_lid = 0;
95 return 0;
98 static int i915_resume(struct drm_device *dev)
100 struct drm_i915_private *dev_priv = dev->dev_private;
101 int ret = 0;
103 if (pci_enable_device(dev->pdev))
104 return -1;
105 pci_set_master(dev->pdev);
107 i915_restore_state(dev);
109 intel_opregion_init(dev, 1);
111 /* KMS EnterVT equivalent */
112 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
113 mutex_lock(&dev->struct_mutex);
114 dev_priv->mm.suspended = 0;
116 ret = i915_gem_init_ringbuffer(dev);
117 if (ret != 0)
118 ret = -1;
119 mutex_unlock(&dev->struct_mutex);
121 drm_irq_install(dev);
123 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
124 /* Resume the modeset for every activated CRTC */
125 drm_helper_resume_force_mode(dev);
128 dev_priv->modeset_on_lid = 0;
130 return ret;
134 * i965_reset - reset chip after a hang
135 * @dev: drm device to reset
136 * @flags: reset domains
138 * Reset the chip. Useful if a hang is detected. Returns zero on successful
139 * reset or otherwise an error code.
141 * Procedure is fairly simple:
142 * - reset the chip using the reset reg
143 * - re-init context state
144 * - re-init hardware status page
145 * - re-init ring buffer
146 * - re-init interrupt state
147 * - re-init display
149 int i965_reset(struct drm_device *dev, u8 flags)
151 drm_i915_private_t *dev_priv = dev->dev_private;
152 unsigned long timeout;
153 u8 gdrst;
155 * We really should only reset the display subsystem if we actually
156 * need to
158 bool need_display = true;
160 mutex_lock(&dev->struct_mutex);
163 * Clear request list
165 i915_gem_retire_requests(dev);
167 if (need_display)
168 i915_save_display(dev);
170 if (IS_I965G(dev) || IS_G4X(dev)) {
172 * Set the domains we want to reset, then the reset bit (bit 0).
173 * Clear the reset bit after a while and wait for hardware status
174 * bit (bit 1) to be set
176 pci_read_config_byte(dev->pdev, GDRST, &gdrst);
177 pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0));
178 udelay(50);
179 pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe);
181 /* ...we don't want to loop forever though, 500ms should be plenty */
182 timeout = jiffies + msecs_to_jiffies(500);
183 do {
184 udelay(100);
185 pci_read_config_byte(dev->pdev, GDRST, &gdrst);
186 } while ((gdrst & 0x1) && time_after(timeout, jiffies));
188 if (gdrst & 0x1) {
189 WARN(true, "i915: Failed to reset chip\n");
190 mutex_unlock(&dev->struct_mutex);
191 return -EIO;
193 } else {
194 DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
195 return -ENODEV;
198 /* Ok, now get things going again... */
201 * Everything depends on having the GTT running, so we need to start
202 * there. Fortunately we don't need to do this unless we reset the
203 * chip at a PCI level.
205 * Next we need to restore the context, but we don't use those
206 * yet either...
208 * Ring buffer needs to be re-initialized in the KMS case, or if X
209 * was running at the time of the reset (i.e. we weren't VT
210 * switched away).
212 if (drm_core_check_feature(dev, DRIVER_MODESET) ||
213 !dev_priv->mm.suspended) {
214 drm_i915_ring_buffer_t *ring = &dev_priv->ring;
215 struct drm_gem_object *obj = ring->ring_obj;
216 struct drm_i915_gem_object *obj_priv = obj->driver_private;
217 dev_priv->mm.suspended = 0;
219 /* Stop the ring if it's running. */
220 I915_WRITE(PRB0_CTL, 0);
221 I915_WRITE(PRB0_TAIL, 0);
222 I915_WRITE(PRB0_HEAD, 0);
224 /* Initialize the ring. */
225 I915_WRITE(PRB0_START, obj_priv->gtt_offset);
226 I915_WRITE(PRB0_CTL,
227 ((obj->size - 4096) & RING_NR_PAGES) |
228 RING_NO_REPORT |
229 RING_VALID);
230 if (!drm_core_check_feature(dev, DRIVER_MODESET))
231 i915_kernel_lost_context(dev);
232 else {
233 ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
234 ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
235 ring->space = ring->head - (ring->tail + 8);
236 if (ring->space < 0)
237 ring->space += ring->Size;
240 mutex_unlock(&dev->struct_mutex);
241 drm_irq_uninstall(dev);
242 drm_irq_install(dev);
243 mutex_lock(&dev->struct_mutex);
247 * Display needs restore too...
249 if (need_display)
250 i915_restore_display(dev);
252 mutex_unlock(&dev->struct_mutex);
253 return 0;
257 static int __devinit
258 i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
260 return drm_get_dev(pdev, ent, &driver);
263 static void
264 i915_pci_remove(struct pci_dev *pdev)
266 struct drm_device *dev = pci_get_drvdata(pdev);
268 drm_put_dev(dev);
271 static int
272 i915_pci_suspend(struct pci_dev *pdev, pm_message_t state)
274 struct drm_device *dev = pci_get_drvdata(pdev);
276 return i915_suspend(dev, state);
279 static int
280 i915_pci_resume(struct pci_dev *pdev)
282 struct drm_device *dev = pci_get_drvdata(pdev);
284 return i915_resume(dev);
287 static struct vm_operations_struct i915_gem_vm_ops = {
288 .fault = i915_gem_fault,
289 .open = drm_gem_vm_open,
290 .close = drm_gem_vm_close,
293 static struct drm_driver driver = {
294 /* don't use mtrr's here, the Xserver or user space app should
295 * deal with them for intel hardware.
297 .driver_features =
298 DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
299 DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
300 .load = i915_driver_load,
301 .unload = i915_driver_unload,
302 .open = i915_driver_open,
303 .lastclose = i915_driver_lastclose,
304 .preclose = i915_driver_preclose,
305 .postclose = i915_driver_postclose,
306 .suspend = i915_suspend,
307 .resume = i915_resume,
308 .device_is_agp = i915_driver_device_is_agp,
309 .enable_vblank = i915_enable_vblank,
310 .disable_vblank = i915_disable_vblank,
311 .irq_preinstall = i915_driver_irq_preinstall,
312 .irq_postinstall = i915_driver_irq_postinstall,
313 .irq_uninstall = i915_driver_irq_uninstall,
314 .irq_handler = i915_driver_irq_handler,
315 .reclaim_buffers = drm_core_reclaim_buffers,
316 .get_map_ofs = drm_core_get_map_ofs,
317 .get_reg_ofs = drm_core_get_reg_ofs,
318 .master_create = i915_master_create,
319 .master_destroy = i915_master_destroy,
320 #if defined(CONFIG_DEBUG_FS)
321 .debugfs_init = i915_debugfs_init,
322 .debugfs_cleanup = i915_debugfs_cleanup,
323 #endif
324 .gem_init_object = i915_gem_init_object,
325 .gem_free_object = i915_gem_free_object,
326 .gem_vm_ops = &i915_gem_vm_ops,
327 .ioctls = i915_ioctls,
328 .fops = {
329 .owner = THIS_MODULE,
330 .open = drm_open,
331 .release = drm_release,
332 .ioctl = drm_ioctl,
333 .mmap = drm_gem_mmap,
334 .poll = drm_poll,
335 .fasync = drm_fasync,
336 .read = drm_read,
337 #ifdef CONFIG_COMPAT
338 .compat_ioctl = i915_compat_ioctl,
339 #endif
342 .pci_driver = {
343 .name = DRIVER_NAME,
344 .id_table = pciidlist,
345 .probe = i915_pci_probe,
346 .remove = i915_pci_remove,
347 #ifdef CONFIG_PM
348 .resume = i915_pci_resume,
349 .suspend = i915_pci_suspend,
350 #endif
353 .name = DRIVER_NAME,
354 .desc = DRIVER_DESC,
355 .date = DRIVER_DATE,
356 .major = DRIVER_MAJOR,
357 .minor = DRIVER_MINOR,
358 .patchlevel = DRIVER_PATCHLEVEL,
361 static int __init i915_init(void)
363 driver.num_ioctls = i915_max_ioctl;
365 i915_gem_shrinker_init();
368 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
369 * explicitly disabled with the module pararmeter.
371 * Otherwise, just follow the parameter (defaulting to off).
373 * Allow optional vga_text_mode_force boot option to override
374 * the default behavior.
376 #if defined(CONFIG_DRM_I915_KMS)
377 if (i915_modeset != 0)
378 driver.driver_features |= DRIVER_MODESET;
379 #endif
380 if (i915_modeset == 1)
381 driver.driver_features |= DRIVER_MODESET;
383 #ifdef CONFIG_VGA_CONSOLE
384 if (vgacon_text_force() && i915_modeset == -1)
385 driver.driver_features &= ~DRIVER_MODESET;
386 #endif
388 return drm_init(&driver);
391 static void __exit i915_exit(void)
393 i915_gem_shrinker_exit();
394 drm_exit(&driver);
397 module_init(i915_init);
398 module_exit(i915_exit);
400 MODULE_AUTHOR(DRIVER_AUTHOR);
401 MODULE_DESCRIPTION(DRIVER_DESC);
402 MODULE_LICENSE("GPL and additional rights");