[ARM] 3396/2: AT91RM9200 Platform devices update
[linux-2.6/kvm.git] / include / asm-arm / arch-at91rm9200 / board.h
blob4fdef13d01d4a4ce5b80ebf359019ea4f4251d34
1 /*
2 * include/asm-arm/arch-at91rm9200/board.h
4 * Copyright (C) 2005 HP Labs
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 * These are data structures found in platform_device.dev.platform_data,
23 * and describing board-specfic data needed by drivers. For example,
24 * which pin is used for a given GPIO role.
26 * In 2.6, drivers should strongly avoid board-specific knowledge so
27 * that supporting new boards normally won't require driver patches.
28 * Most board-specific knowledge should be in arch/.../board-*.c files.
31 #ifndef __ASM_ARCH_BOARD_H
32 #define __ASM_ARCH_BOARD_H
34 /* Clocks */
35 extern unsigned long at91_master_clock;
37 /* Serial Port */
38 extern int at91_serial_map[AT91_NR_UART];
39 extern int at91_console_port;
41 #include <linux/mtd/partitions.h>
43 /* USB Device */
44 struct at91_udc_data {
45 u8 vbus_pin; /* high == host powering us */
46 u8 pullup_pin; /* high == D+ pulled up */
48 extern void __init at91_add_device_udc(struct at91_udc_data *data);
50 /* Compact Flash */
51 struct at91_cf_data {
52 u8 irq_pin; /* I/O IRQ */
53 u8 det_pin; /* Card detect */
54 u8 vcc_pin; /* power switching */
55 u8 rst_pin; /* card reset */
57 extern void __init at91_add_device_cf(struct at91_cf_data *data);
59 /* MMC / SD */
60 struct at91_mmc_data {
61 u8 det_pin; /* card detect IRQ */
62 unsigned is_b:1; /* uses B side (vs A) */
63 unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
64 u8 wp_pin; /* (SD) writeprotect detect */
65 u8 vcc_pin; /* power switching (high == on) */
67 extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
69 /* Ethernet */
70 struct at91_eth_data {
71 u8 phy_irq_pin; /* PHY IRQ */
72 u8 is_rmii; /* using RMII interface? */
74 extern void __init at91_add_device_eth(struct at91_eth_data *data);
76 /* USB Host */
77 struct at91_usbh_data {
78 u8 ports; /* number of ports on root hub */
80 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
82 /* NAND / SmartMedia */
83 struct at91_nand_data {
84 u8 enable_pin; /* chip enable */
85 u8 det_pin; /* card detect */
86 u8 rdy_pin; /* ready/busy */
87 u8 ale; /* address line number connected to ALE */
88 u8 cle; /* address line number connected to CLE */
89 struct mtd_partition* (*partition_info)(int, int*);
91 extern void __init at91_add_device_nand(struct at91_nand_data *data);
93 /* I2C*/
94 void __init at91_add_device_i2c(void);
96 /* RTC */
97 void __init at91_add_device_rtc(void);
99 /* LEDs */
100 extern u8 at91_leds_cpu;
101 extern u8 at91_leds_timer;
102 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
104 #endif