memstick: fix parsing of "assembly_date" attribute field

[linux-2.6/kvm.git] / drivers / net / ni52.c

/*
 * net-3-driver for the NI5210 card (i82586 Ethernet chip)
 *
 * This is an extension to the Linux operating system, and is covered by the
 * same GNU General Public License that covers that work.
 *
 * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
 * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
 *    [feel free to mail ....]
 *
 * when using as module: (no autoprobing!)
 *   compile with:
 *       gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ -DMODULE -c ni52.c
 *   run with e.g:
 *       insmod ni52.o io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
 *
 * CAN YOU PLEASE REPORT ME YOUR PERFORMANCE EXPERIENCES !!.
 *
 * If you find a bug, please report me:
 *   The kernel panic output and any kmsg from the ni52 driver
 *   the ni5210-driver-version and the linux-kernel version
 *   how many shared memory (memsize) on the netcard,
 *   bootprom: yes/no, base_addr, mem_start
 *   maybe the ni5210-card revision and the i82586 version
 *
 * autoprobe for: base_addr: 0x300,0x280,0x360,0x320,0x340
 *                mem_start: 0xd0000,0xd2000,0xc8000,0xca000,0xd4000,0xd6000,
 *                           0xd8000,0xcc000,0xce000,0xda000,0xdc000
 *
 * sources:
 *   skeleton.c from Donald Becker
 *
 * I have also done a look in the following sources: (mail me if you need them)
 *   crynwr-packet-driver by Russ Nelson
 *   Garret A. Wollman's (fourth) i82586-driver for BSD
 *   (before getting an i82596 (yes 596 not 586) manual, the existing drivers
 *    helped me a lot to understand this tricky chip.)
 *
 * Known Problems:
 *   The internal sysbus seems to be slow. So we often lose packets because of
 *   overruns while receiving from a fast remote host.
 *   This can slow down TCP connections. Maybe the newer ni5210 cards are
 *   better. My experience is, that if a machine sends with more than about
 *   500-600K/s the fifo/sysbus overflows.
 *
 * IMPORTANT NOTE:
 *   On fast networks, it's a (very) good idea to have 16K shared memory. With
 *   8K, we can store only 4 receive frames, so it can (easily) happen that a
 *   remote machine 'overruns' our system.
 *
 * Known i82586/card problems (I'm sure, there are many more!):
 *   Running the NOP-mode, the i82586 sometimes seems to forget to report
 *   every xmit-interrupt until we restart the CU.
 *   Another MAJOR bug is, that the RU sometimes seems to ignore the EL-Bit
 *   in the RBD-Struct which indicates an end of the RBD queue.
 *   Instead, the RU fetches another (randomly selected and
 *   usually used) RBD and begins to fill it. (Maybe, this happens only if
 *   the last buffer from the previous RFD fits exact into the queue and
 *   the next RFD can't fetch an initial RBD. Anyone knows more? )
 *
 * results from ftp performance tests with Linux 1.2.5
 *   send and receive about 350-400 KByte/s (peak up to 460 kbytes/s)
 *   sending in NOP-mode: peak performance up to 530K/s (but better don't
 *   run this mode)
 */

/*
 * 29.Sept.96: virt_to_bus changes for new memory scheme
 * 19.Feb.96: more Mcast changes, module support (MH)
 *
 * 18.Nov.95: Mcast changes (AC).
 *
 * 23.April.95: fixed(?) receiving problems by configuring a RFD more
 *              than the number of RBD's. Can maybe cause other problems.
 * 18.April.95: Added MODULE support (MH)
 * 17.April.95: MC related changes in init586() and set_multicast_list().
 *              removed use of 'jiffies' in init586() (MH)
 *
 * 19.Sep.94: Added Multicast support (not tested yet) (MH)
 *
 * 18.Sep.94: Workaround for 'EL-Bug'. Removed flexible RBD-handling.
 *            Now, every RFD has exact one RBD. (MH)
 *
 * 14.Sep.94: added promiscuous mode, a few cleanups (MH)
 *
 * 19.Aug.94: changed request_irq() parameter (MH)
 *
 * 20.July.94: removed cleanup bugs, removed a 16K-mem-probe-bug (MH)
 *
 * 19.July.94: lotsa cleanups .. (MH)
 *
 * 17.July.94: some patches ... verified to run with 1.1.29 (MH)
 *
 * 4.July.94: patches for Linux 1.1.24  (MH)
 *
 * 26.March.94: patches for Linux 1.0 and iomem-auto-probe (MH)
 *
 * 30.Sep.93: Added nop-chain .. driver now runs with only one Xmit-Buff,
 *                              too (MH)
 *
 * < 30.Sep.93: first versions
 */

static int debuglevel;  /* debug-printk 0: off 1: a few 2: more */
static int automatic_resume; /* experimental .. better should be zero */
static int rfdadd;      /* rfdadd=1 may be better for 8K MEM cards */
static int fifo = 0x8;  /* don't change */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/io.h>

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>

#include "ni52.h"

#define DRV_NAME "ni52"

#define DEBUG       /* debug on */
#define SYSBUSVAL 1 /* 8 Bit */

#define ni_attn586()  { outb(0, dev->base_addr + NI52_ATTENTION); }
#define ni_reset586() { outb(0, dev->base_addr + NI52_RESET); }
#define ni_disint()   { outb(0, dev->base_addr + NI52_INTDIS); }
#define ni_enaint()   { outb(0, dev->base_addr + NI52_INTENA); }

#define make32(ptr16) (p->memtop + (short) (ptr16))
#define make24(ptr32) ((unsigned long)(ptr32)) - p->base
#define make16(ptr32) ((unsigned short) ((unsigned long)(ptr32)\
                                        - (unsigned long) p->memtop))

/******************* how to calculate the buffers *****************************

  * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
  * --------------- in a different (more stable?) mode. Only in this mode it's
  *                 possible to configure the driver with 'NO_NOPCOMMANDS'

sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
sizeof(rfd) = 24; sizeof(rbd) = 12;
sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
sizeof(nop_cmd) = 8;

  * if you don't know the driver, better do not change these values: */

#define RECV_BUFF_SIZE 1524 /* slightly oversized */
#define XMIT_BUFF_SIZE 1524 /* slightly oversized */
#define NUM_XMIT_BUFFS 1    /* config for both, 8K and 16K shmem */
#define NUM_RECV_BUFFS_8  4 /* config for 8K shared mem */
#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */
#define NO_NOPCOMMANDS      /* only possible with NUM_XMIT_BUFFS=1 */

/**************************************************************************/


#define NI52_TOTAL_SIZE 16
#define NI52_ADDR0 0x02
#define NI52_ADDR1 0x07
#define NI52_ADDR2 0x01

static int     ni52_probe1(struct net_device *dev, int ioaddr);
static irqreturn_t ni52_interrupt(int irq, void *dev_id);
static int     ni52_open(struct net_device *dev);
static int     ni52_close(struct net_device *dev);
static int     ni52_send_packet(struct sk_buff *, struct net_device *);
static struct  net_device_stats *ni52_get_stats(struct net_device *dev);
static void    set_multicast_list(struct net_device *dev);
static void    ni52_timeout(struct net_device *dev);

/* helper-functions */
static int     init586(struct net_device *dev);
static int     check586(struct net_device *dev, char *where, unsigned size);
static void    alloc586(struct net_device *dev);
static void    startrecv586(struct net_device *dev);
static void   *alloc_rfa(struct net_device *dev, void *ptr);
static void    ni52_rcv_int(struct net_device *dev);
static void    ni52_xmt_int(struct net_device *dev);
static void    ni52_rnr_int(struct net_device *dev);

struct priv {
        struct net_device_stats stats;
        unsigned long base;
        char *memtop;
        spinlock_t spinlock;
        int reset;
        struct rfd_struct *rfd_last, *rfd_top, *rfd_first;
        struct scp_struct *scp;
        struct iscp_struct *iscp;
        struct scb_struct *scb;
        struct tbd_struct *xmit_buffs[NUM_XMIT_BUFFS];
#if (NUM_XMIT_BUFFS == 1)
        struct transmit_cmd_struct *xmit_cmds[2];
        struct nop_cmd_struct *nop_cmds[2];
#else
        struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];
        struct nop_cmd_struct *nop_cmds[NUM_XMIT_BUFFS];
#endif
        int nop_point, num_recv_buffs;
        char *xmit_cbuffs[NUM_XMIT_BUFFS];
        int xmit_count, xmit_last;
};

/* wait for command with timeout: */
static void wait_for_scb_cmd(struct net_device *dev)
{
        struct priv *p = dev->priv;
        int i;
        for (i = 0; i < 16384; i++) {
                if (readb(&p->scb->cmd_cuc) == 0)
                      break;
                udelay(4);
                if (i == 16383) {
                        printk(KERN_ERR "%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",
                                dev->name, readb(&p->scb->cmd_cuc), readb(&p->scb->cus));
                        if (!p->reset) {
                                p->reset = 1;
                                ni_reset586();
                        }
                }
        }
}

static void wait_for_scb_cmd_ruc(struct net_device *dev)
{
        struct priv *p = dev->priv;
        int i;
        for (i = 0; i < 16384; i++) {
                if (readb(&p->scb->cmd_ruc) == 0)
                        break;
                udelay(4);
                if (i == 16383) {
                        printk(KERN_ERR "%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",
                                dev->name, p->scb->cmd_ruc, p->scb->rus);
                        if (!p->reset) {
                                p->reset = 1;
                                ni_reset586();
                        }
                }
        }
}

static void wait_for_stat_compl(void *p)
{
        struct nop_cmd_struct *addr = p;
        int i;
        for (i = 0; i < 32767; i++) {
                if (readw(&((addr)->cmd_status)) & STAT_COMPL)
                        break;
                udelay(32);
        }
}

/**********************************************
 * close device
 */
static int ni52_close(struct net_device *dev)
{
        free_irq(dev->irq, dev);
        ni_reset586(); /* the hard way to stop the receiver */
        netif_stop_queue(dev);
        return 0;
}

/**********************************************
 * open device
 */
static int ni52_open(struct net_device *dev)
{
        int ret;

        ni_disint();
        alloc586(dev);
        init586(dev);
        startrecv586(dev);
        ni_enaint();

        ret = request_irq(dev->irq, &ni52_interrupt, 0, dev->name, dev);
        if (ret) {
                ni_reset586();
                return ret;
        }
        netif_start_queue(dev);
        return 0; /* most done by init */
}

/**********************************************
 * Check to see if there's an 82586 out there.
 */
static int check586(struct net_device *dev, char *where, unsigned size)
{
        struct priv pb;
        struct priv *p = /* (struct priv *) dev->priv*/ &pb;
        char *iscp_addrs[2];
        int i;

        p->base = (unsigned long) isa_bus_to_virt((unsigned long)where)
                                                        + size - 0x01000000;
        p->memtop = isa_bus_to_virt((unsigned long)where) + size;
        p->scp = (struct scp_struct *)(p->base + SCP_DEFAULT_ADDRESS);
        memset_io((char *)p->scp, 0, sizeof(struct scp_struct));
        for (i = 0; i < sizeof(struct scp_struct); i++)
                /* memory was writeable? */
                if (readb((char *)p->scp + i))
                        return 0;
        writeb(SYSBUSVAL, &p->scp->sysbus);     /* 1 = 8Bit-Bus, 0 = 16 Bit */
        if (readb(&p->scp->sysbus) != SYSBUSVAL)
                return 0;

        iscp_addrs[0] = isa_bus_to_virt((unsigned long)where);
        iscp_addrs[1] = (char *) p->scp - sizeof(struct iscp_struct);

        for (i = 0; i < 2; i++) {
                p->iscp = (struct iscp_struct *) iscp_addrs[i];
                memset_io((char *)p->iscp, 0, sizeof(struct iscp_struct));

                writel(make24(p->iscp), &p->scp->iscp);
                writeb(1, &p->iscp->busy);

                ni_reset586();
                ni_attn586();
                mdelay(32);     /* wait a while... */
                /* i82586 clears 'busy' after successful init */
                if (readb(&p->iscp->busy))
                        return 0;
        }
        return 1;
}

/******************************************************************
 * set iscp at the right place, called by ni52_probe1 and open586.
 */
static void alloc586(struct net_device *dev)
{
        struct priv *p =        (struct priv *) dev->priv;

        ni_reset586();
        mdelay(32);

        spin_lock_init(&p->spinlock);

        p->scp  = (struct scp_struct *) (p->base + SCP_DEFAULT_ADDRESS);
        p->scb  = (struct scb_struct *) isa_bus_to_virt(dev->mem_start);
        p->iscp = (struct iscp_struct *)
                        ((char *)p->scp - sizeof(struct iscp_struct));

        memset_io(p->iscp, 0, sizeof(struct iscp_struct));
        memset_io(p->scp , 0, sizeof(struct scp_struct));

        writel(make24(p->iscp), &p->scp->iscp);
        writeb(SYSBUSVAL, &p->scp->sysbus);
        writew(make16(p->scb), &p->iscp->scb_offset);

        writeb(1, &p->iscp->busy);
        ni_reset586();
        ni_attn586();

        mdelay(32);

        if (readb(&p->iscp->busy))
                printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);

        p->reset = 0;

        memset_io((char *)p->scb, 0, sizeof(struct scb_struct));
}

/* set: io,irq,memstart,memend or set it when calling insmod */
static int irq = 9;
static int io = 0x300;
static long memstart;   /* e.g 0xd0000 */
static long memend;     /* e.g 0xd4000 */

/**********************************************
 * probe the ni5210-card
 */
struct net_device * __init ni52_probe(int unit)
{
        struct net_device *dev = alloc_etherdev(sizeof(struct priv));
        static int ports[] = {0x300, 0x280, 0x360 , 0x320 , 0x340, 0};
        int *port;
        int err = 0;

        if (!dev)
                return ERR_PTR(-ENOMEM);

        if (unit >= 0) {
                sprintf(dev->name, "eth%d", unit);
                netdev_boot_setup_check(dev);
                io = dev->base_addr;
                irq = dev->irq;
                memstart = dev->mem_start;
                memend = dev->mem_end;
        }

        if (io > 0x1ff) {       /* Check a single specified location. */
                err = ni52_probe1(dev, io);
        } else if (io > 0) {            /* Don't probe at all. */
                err = -ENXIO;
        } else {
                for (port = ports; *port && ni52_probe1(dev, *port) ; port++)
                        ;
                if (*port)
                        goto got_it;
#ifdef FULL_IO_PROBE
                for (io = 0x200; io < 0x400 && ni52_probe1(dev, io); io += 8)
                        ;
                if (io < 0x400)
                        goto got_it;
#endif
                err = -ENODEV;
        }
        if (err)
                goto out;
got_it:
        err = register_netdev(dev);
        if (err)
                goto out1;
        return dev;
out1:
        release_region(dev->base_addr, NI52_TOTAL_SIZE);
out:
        free_netdev(dev);
        return ERR_PTR(err);
}

static int __init ni52_probe1(struct net_device *dev, int ioaddr)
{
        int i, size, retval;

        dev->base_addr = ioaddr;
        dev->irq = irq;
        dev->mem_start = memstart;
        dev->mem_end = memend;

        if (!request_region(ioaddr, NI52_TOTAL_SIZE, DRV_NAME))
                return -EBUSY;

        if (!(inb(ioaddr+NI52_MAGIC1) == NI52_MAGICVAL1) ||
            !(inb(ioaddr+NI52_MAGIC2) == NI52_MAGICVAL2)) {
                retval = -ENODEV;
                goto out;
        }

        for (i = 0; i < ETH_ALEN; i++)
                dev->dev_addr[i] = inb(dev->base_addr+i);

        if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1
                 || dev->dev_addr[2] != NI52_ADDR2) {
                retval = -ENODEV;
                goto out;
        }

        printk(KERN_INFO "%s: NI5210 found at %#3lx, ",
                                dev->name, dev->base_addr);

        /*
         * check (or search) IO-Memory, 8K and 16K
         */
#ifdef MODULE
        size = dev->mem_end - dev->mem_start;
        if (size != 0x2000 && size != 0x4000) {
                printk("\n");
                printk(KERN_ERR "%s: Invalid memory size %d. Allowed is 0x2000 or 0x4000 bytes.\n", dev->name, size);
                retval = -ENODEV;
                goto out;
        }
        if (!check586(dev, (char *)dev->mem_start, size)) {
                printk(KERN_ERR "?memcheck, Can't find memory at 0x%lx with size %d!\n", dev->mem_start, size);
                retval = -ENODEV;
                goto out;
        }
#else
        if (dev->mem_start != 0) {
                /* no auto-mem-probe */
                size = 0x4000; /* check for 16K mem */
                if (!check586(dev, (char *) dev->mem_start, size)) {
                        size = 0x2000; /* check for 8K mem */
                        if (!check586(dev, (char *)dev->mem_start, size)) {
                                printk(KERN_ERR "?memprobe, Can't find memory at 0x%lx!\n", dev->mem_start);
                                retval = -ENODEV;
                                goto out;
                        }
                }
        } else {
                static const unsigned long memaddrs[] = {
                        0xc8000, 0xca000, 0xcc000, 0xce000, 0xd0000, 0xd2000,
                        0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0
                };
                for (i = 0;; i++) {
                        if (!memaddrs[i]) {
                                printk(KERN_ERR "?memprobe, Can't find io-memory!\n");
                                retval = -ENODEV;
                                goto out;
                        }
                        dev->mem_start = memaddrs[i];
                        size = 0x2000; /* check for 8K mem */
                        if (check586(dev, (char *)dev->mem_start, size))
                                /* 8K-check */
                                break;
                        size = 0x4000; /* check for 16K mem */
                        if (check586(dev, (char *)dev->mem_start, size))
                                /* 16K-check */
                                break;
                }
        }
        /* set mem_end showed by 'ifconfig' */
        dev->mem_end = dev->mem_start + size;
#endif

        memset((char *)dev->priv, 0, sizeof(struct priv));

        ((struct priv *)(dev->priv))->memtop =
                                isa_bus_to_virt(dev->mem_start) + size;
        ((struct priv *)(dev->priv))->base =  (unsigned long)
                        isa_bus_to_virt(dev->mem_start) + size - 0x01000000;
        alloc586(dev);

        /* set number of receive-buffs according to memsize */
        if (size == 0x2000)
                ((struct priv *) dev->priv)->num_recv_buffs = NUM_RECV_BUFFS_8;
        else
                ((struct priv *) dev->priv)->num_recv_buffs = NUM_RECV_BUFFS_16;

        printk(KERN_DEBUG "Memaddr: 0x%lx, Memsize: %d, ",
                                dev->mem_start, size);

        if (dev->irq < 2) {
                unsigned long irq_mask;

                irq_mask = probe_irq_on();
                ni_reset586();
                ni_attn586();

                mdelay(20);
                dev->irq = probe_irq_off(irq_mask);
                if (!dev->irq) {
                        printk("?autoirq, Failed to detect IRQ line!\n");
                        retval = -EAGAIN;
                        goto out;
                }
                printk("IRQ %d (autodetected).\n", dev->irq);
        } else {
                if (dev->irq == 2)
                        dev->irq = 9;
                printk("IRQ %d (assigned and not checked!).\n", dev->irq);
        }

        dev->open               = ni52_open;
        dev->stop               = ni52_close;
        dev->get_stats          = ni52_get_stats;
        dev->tx_timeout         = ni52_timeout;
        dev->watchdog_timeo     = HZ/20;
        dev->hard_start_xmit    = ni52_send_packet;
        dev->set_multicast_list = set_multicast_list;

        dev->if_port            = 0;

        return 0;
out:
        release_region(ioaddr, NI52_TOTAL_SIZE);
        return retval;
}

/**********************************************
 * init the chip (ni52-interrupt should be disabled?!)
 * needs a correct 'allocated' memory
 */

static int init586(struct net_device *dev)
{
        void *ptr;
        int i, result = 0;
        struct priv *p = (struct priv *)dev->priv;
        struct configure_cmd_struct *cfg_cmd;
        struct iasetup_cmd_struct *ias_cmd;
        struct tdr_cmd_struct *tdr_cmd;
        struct mcsetup_cmd_struct *mc_cmd;
        struct dev_mc_list *dmi = dev->mc_list;
        int num_addrs = dev->mc_count;

        ptr = (void *) ((char *)p->scb + sizeof(struct scb_struct));

        cfg_cmd = (struct configure_cmd_struct *)ptr; /* configure-command */
        writew(0, &cfg_cmd->cmd_status);
        writew(CMD_CONFIGURE | CMD_LAST, &cfg_cmd->cmd_cmd);
        writew(0xFFFF, &cfg_cmd->cmd_link);

        /* number of cfg bytes */
        writeb(0x0a, &cfg_cmd->byte_cnt);
        /* fifo-limit (8=tx:32/rx:64) */
        writeb(fifo, &cfg_cmd->fifo);
        /* hold or discard bad recv frames (bit 7) */
        writeb(0x40, &cfg_cmd->sav_bf);
        /* addr_len |!src_insert |pre-len |loopback */
        writeb(0x2e, &cfg_cmd->adr_len);
        writeb(0x00, &cfg_cmd->priority);
        writeb(0x60, &cfg_cmd->ifs);;
        writeb(0x00, &cfg_cmd->time_low);
        writeb(0xf2, &cfg_cmd->time_high);
        writeb(0x00, &cfg_cmd->promisc);;
        if (dev->flags & IFF_ALLMULTI) {
                int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
                if (num_addrs > len) {
                        printk(KERN_ERR "%s: switching to promisc. mode\n",
                                dev->name);
                        dev->flags |= IFF_PROMISC;
                }
        }
        if (dev->flags & IFF_PROMISC)
                writeb(0x01, &cfg_cmd->promisc);
        writeb(0x00, &cfg_cmd->carr_coll);
        writew(make16(cfg_cmd), &p->scb->cbl_offset);
        writew(0, &p->scb->cmd_ruc);

        writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
        ni_attn586();

        wait_for_stat_compl(cfg_cmd);

        if ((readw(&cfg_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
                                                        (STAT_COMPL|STAT_OK)) {
                printk(KERN_ERR "%s: configure command failed: %x\n",
                                dev->name, readw(&cfg_cmd->cmd_status));
                return 1;
        }

        /*
         * individual address setup
         */

        ias_cmd = (struct iasetup_cmd_struct *)ptr;

        writew(0, &ias_cmd->cmd_status);
        writew(CMD_IASETUP | CMD_LAST, &ias_cmd->cmd_cmd);
        writew(0xffff, &ias_cmd->cmd_link);

        memcpy_toio((char *)&ias_cmd->iaddr, (char *)dev->dev_addr, ETH_ALEN);

        writew(make16(ias_cmd), &p->scb->cbl_offset);

        writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
        ni_attn586();

        wait_for_stat_compl(ias_cmd);

        if ((readw(&ias_cmd->cmd_status) & (STAT_OK|STAT_COMPL)) !=
                                                        (STAT_OK|STAT_COMPL)) {
                printk(KERN_ERR "%s (ni52): individual address setup command failed: %04x\n", dev->name, readw(&ias_cmd->cmd_status));
                return 1;
        }

        /*
         * TDR, wire check .. e.g. no resistor e.t.c
         */

        tdr_cmd = (struct tdr_cmd_struct *)ptr;

        writew(0, &tdr_cmd->cmd_status);
        writew(CMD_TDR | CMD_LAST, &tdr_cmd->cmd_cmd);
        writew(0xffff, &tdr_cmd->cmd_link);
        writew(0, &tdr_cmd->status);

        writew(make16(tdr_cmd), &p->scb->cbl_offset);
        writeb(CUC_START, &p->scb->cmd_cuc); /* cmd.-unit start */
        ni_attn586();

        wait_for_stat_compl(tdr_cmd);

        if (!(readw(&tdr_cmd->cmd_status) & STAT_COMPL))
                printk(KERN_ERR "%s: Problems while running the TDR.\n",
                                dev->name);
        else {
                udelay(16);
                result = readw(&tdr_cmd->status);
                writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
                ni_attn586(); /* ack the interrupts */

                if (result & TDR_LNK_OK)
                        ;
                else if (result & TDR_XCVR_PRB)
                        printk(KERN_ERR "%s: TDR: Transceiver problem. Check the cable(s)!\n",
                                dev->name);
                else if (result & TDR_ET_OPN)
                        printk(KERN_ERR "%s: TDR: No correct termination %d clocks away.\n",
                                dev->name, result & TDR_TIMEMASK);
                else if (result & TDR_ET_SRT) {
                        /* time == 0 -> strange :-) */
                        if (result & TDR_TIMEMASK)
                                printk(KERN_ERR "%s: TDR: Detected a short circuit %d clocks away.\n",
                                        dev->name, result & TDR_TIMEMASK);
                } else
                        printk(KERN_ERR "%s: TDR: Unknown status %04x\n",
                                                dev->name, result);
        }

        /*
         * Multicast setup
         */
        if (num_addrs && !(dev->flags & IFF_PROMISC)) {
                mc_cmd = (struct mcsetup_cmd_struct *) ptr;
                writew(0, &mc_cmd->cmd_status);
                writew(CMD_MCSETUP | CMD_LAST, &mc_cmd->cmd_cmd);
                writew(0xffff, &mc_cmd->cmd_link);
                writew(num_addrs * 6, &mc_cmd->mc_cnt);

                for (i = 0; i < num_addrs; i++, dmi = dmi->next)
                        memcpy_toio((char *) mc_cmd->mc_list[i],
                                                        dmi->dmi_addr, 6);

                writew(make16(mc_cmd), &p->scb->cbl_offset);
                writeb(CUC_START, &p->scb->cmd_cuc);
                ni_attn586();

                wait_for_stat_compl(mc_cmd);

                if ((readw(&mc_cmd->cmd_status) & (STAT_COMPL|STAT_OK))
                                                 != (STAT_COMPL|STAT_OK))
                        printk(KERN_ERR "%s: Can't apply multicast-address-list.\n", dev->name);
        }

        /*
         * alloc nop/xmit-cmds
         */
#if (NUM_XMIT_BUFFS == 1)
        for (i = 0; i < 2; i++) {
                p->nop_cmds[i] = (struct nop_cmd_struct *)ptr;
                writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
                writew(0, &p->nop_cmds[i]->cmd_status);
                writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
                ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
        }
#else
        for (i = 0; i < NUM_XMIT_BUFFS; i++) {
                p->nop_cmds[i] = (struct nop_cmd_struct *)ptr;
                writew(CMD_NOP, &p->nop_cmds[i]->cmd_cmd);
                writew(0, &p->nop_cmds[i]->cmd_status);
                writew(make16(p->nop_cmds[i]), &p->nop_cmds[i]->cmd_link);
                ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
        }
#endif

        ptr = alloc_rfa(dev, (void *)ptr); /* init receive-frame-area */

        /*
         * alloc xmit-buffs / init xmit_cmds
         */
        for (i = 0; i < NUM_XMIT_BUFFS; i++) {
                /* Transmit cmd/buff 0 */
                p->xmit_cmds[i] = (struct transmit_cmd_struct *)ptr;
                ptr = (char *) ptr + sizeof(struct transmit_cmd_struct);
                p->xmit_cbuffs[i] = (char *)ptr; /* char-buffs */
                ptr = (char *) ptr + XMIT_BUFF_SIZE;
                p->xmit_buffs[i] = (struct tbd_struct *)ptr; /* TBD */
                ptr = (char *) ptr + sizeof(struct tbd_struct);
                if ((void *)ptr > (void *)p->iscp) {
                        printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n",
                                dev->name);
                        return 1;
                }
                memset_io((char *)(p->xmit_cmds[i]), 0,
                                        sizeof(struct transmit_cmd_struct));
                memset_io((char *)(p->xmit_buffs[i]), 0,
                                        sizeof(struct tbd_struct));
                writew(make16(p->nop_cmds[(i+1)%NUM_XMIT_BUFFS]),
                                        &p->xmit_cmds[i]->cmd_link);
                writew(STAT_COMPL, &p->xmit_cmds[i]->cmd_status);
                writew(CMD_XMIT|CMD_INT, &p->xmit_cmds[i]->cmd_cmd);
                writew(make16(p->xmit_buffs[i]), &p->xmit_cmds[i]->tbd_offset);
                writew(0xffff, &p->xmit_buffs[i]->next);
                writel(make24(p->xmit_cbuffs[i]), &p->xmit_buffs[i]->buffer);
        }

        p->xmit_count = 0;
        p->xmit_last    = 0;
#ifndef NO_NOPCOMMANDS
        p->nop_point    = 0;
#endif

         /*
                * 'start transmitter'
                */
#ifndef NO_NOPCOMMANDS
        writew(make16(p->nop_cmds[0]), &p->scb->cbl_offset);
        writeb(CUC_START, &p->scb->cmd_cuc);
        ni_attn586();
        wait_for_scb_cmd(dev);
#else
        writew(make16(p->xmit_cmds[0]), &p->xmit_cmds[0]->cmd_link);
        writew(CMD_XMIT | CMD_SUSPEND | CMD_INT, &p->xmit_cmds[0]->cmd_cmd);
#endif

        /*
         * ack. interrupts
         */
        writeb(readb(&p->scb->cus) & STAT_MASK, &p->scb->cmd_cuc);
        ni_attn586();
        udelay(16);

        ni_enaint();

        return 0;
}

/******************************************************
 * This is a helper routine for ni52_rnr_int() and init586().
 * It sets up the Receive Frame Area (RFA).
 */

static void *alloc_rfa(struct net_device *dev, void *ptr)
{
        struct rfd_struct *rfd = (struct rfd_struct *)ptr;
        struct rbd_struct *rbd;
        int i;
        struct priv *p = (struct priv *) dev->priv;

        memset_io((char *) rfd, 0,
                sizeof(struct rfd_struct) * (p->num_recv_buffs + rfdadd));
        p->rfd_first = rfd;

        for (i = 0; i < (p->num_recv_buffs + rfdadd); i++) {
                writew(make16(rfd + (i+1) % (p->num_recv_buffs+rfdadd)),
                        &rfd[i].next);
                writew(0xffff, &rfd[i].rbd_offset);
        }
        /* RU suspend */
        writeb(RFD_SUSP, &rfd[p->num_recv_buffs-1+rfdadd].last);

        ptr = (void *) (rfd + (p->num_recv_buffs + rfdadd));

        rbd = (struct rbd_struct *) ptr;
        ptr = (void *) (rbd + p->num_recv_buffs);

         /* clr descriptors */
        memset_io((char *)rbd, 0,
                        sizeof(struct rbd_struct) * (p->num_recv_buffs));

        for (i = 0; i < p->num_recv_buffs; i++) {
                writew(make16(rbd + (i+1) % p->num_recv_buffs), &rbd[i].next);
                writew(RECV_BUFF_SIZE, &rbd[i].size);
                writel(make24(ptr), &rbd[i].buffer);
                ptr = (char *) ptr + RECV_BUFF_SIZE;
        }
        p->rfd_top      = p->rfd_first;
        p->rfd_last = p->rfd_first + (p->num_recv_buffs - 1 + rfdadd);

        writew(make16(p->rfd_first), &p->scb->rfa_offset);
        writew(make16(rbd), &p->rfd_first->rbd_offset);

        return ptr;
}


/**************************************************
 * Interrupt Handler ...
 */

static irqreturn_t ni52_interrupt(int irq, void *dev_id)
{
        struct net_device *dev = dev_id;
        unsigned int stat;
        int cnt = 0;
        struct priv *p;

        p = (struct priv *) dev->priv;

        if (debuglevel > 1)
                printk("I");

        spin_lock(&p->spinlock);

        wait_for_scb_cmd(dev); /* wait for last command */

        while ((stat = readb(&p->scb->cus) & STAT_MASK)) {
                writeb(stat, &p->scb->cmd_cuc);
                ni_attn586();

                if (stat & STAT_FR)      /* received a frame */
                        ni52_rcv_int(dev);

                if (stat & STAT_RNR) { /* RU went 'not ready' */
                        printk("(R)");
                        if (readb(&p->scb->rus) & RU_SUSPEND) {
                                /* special case: RU_SUSPEND */
                                wait_for_scb_cmd(dev);
                                p->scb->cmd_ruc = RUC_RESUME;
                                ni_attn586();
                                wait_for_scb_cmd_ruc(dev);
                        } else {
                                printk(KERN_ERR "%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",
                                        dev->name, stat, readb(&p->scb->rus));
                                ni52_rnr_int(dev);
                        }
                }

                /* Command with I-bit set complete */
                if (stat & STAT_CX)
                         ni52_xmt_int(dev);

#ifndef NO_NOPCOMMANDS
                if (stat & STAT_CNA) {  /* CU went 'not ready' */
                        if (netif_running(dev))
                                printk(KERN_ERR "%s: oops! CU has left active state. stat: %04x/%02x.\n",
                                        dev->name, stat, readb(&p->scb->cus));
                }
#endif

                if (debuglevel > 1)
                        printk("%d", cnt++);

                /* Wait for ack. (ni52_xmt_int can be faster than ack!!) */
                wait_for_scb_cmd(dev);
                if (p->scb->cmd_cuc) {   /* timed out? */
                        printk(KERN_ERR "%s: Acknowledge timed out.\n",
                                dev->name);
                        ni_disint();
                        break;
                }
        }
        spin_unlock(&p->spinlock);

        if (debuglevel > 1)
                printk("i");
        return IRQ_HANDLED;
}

/*******************************************************
 * receive-interrupt
 */

static void ni52_rcv_int(struct net_device *dev)
{
        int status, cnt = 0;
        unsigned short totlen;
        struct sk_buff *skb;
        struct rbd_struct *rbd;
        struct priv *p = (struct priv *)dev->priv;

        if (debuglevel > 0)
                printk("R");

        for (; (status = readb(&p->rfd_top->stat_high)) & RFD_COMPL;) {
                rbd = (struct rbd_struct *) make32(p->rfd_top->rbd_offset);
                if (status & RFD_OK) { /* frame received without error? */
                        totlen = readw(&rbd->status);
                        if (totlen & RBD_LAST) {
                                /* the first and the last buffer? */
                                totlen &= RBD_MASK; /* length of this frame */
                                writew(0x00, &rbd->status);
                                skb = (struct sk_buff *)dev_alloc_skb(totlen+2);
                                if (skb != NULL) {
                                        skb_reserve(skb, 2);
                                        skb_put(skb, totlen);
                                        skb_copy_to_linear_data(skb, (char *)p->base + (unsigned long) rbd->buffer, totlen);
                                        skb->protocol = eth_type_trans(skb, dev);
                                        netif_rx(skb);
                                        dev->last_rx = jiffies;
                                        p->stats.rx_packets++;
                                        p->stats.rx_bytes += totlen;
                                } else
                                        p->stats.rx_dropped++;
                        } else {
                                int rstat;
                                 /* free all RBD's until RBD_LAST is set */
                                totlen = 0;
                                while (!((rstat = readw(&rbd->status)) & RBD_LAST)) {
                                        totlen += rstat & RBD_MASK;
                                        if (!rstat) {
                                                printk(KERN_ERR "%s: Whoops .. no end mark in RBD list\n", dev->name);
                                                break;
                                        }
                                        writew(0, &rbd->status);
                                        rbd = (struct rbd_struct *) make32(readl(&rbd->next));
                                }
                                totlen += rstat & RBD_MASK;
                                writew(0, &rbd->status);
                                printk(KERN_ERR "%s: received oversized frame! length: %d\n",
                                        dev->name, totlen);
                                p->stats.rx_dropped++;
                         }
                } else {/* frame !(ok), only with 'save-bad-frames' */
                        printk(KERN_ERR "%s: oops! rfd-error-status: %04x\n",
                                dev->name, status);
                        p->stats.rx_errors++;
                }
                writeb(0, &p->rfd_top->stat_high);
                writeb(RFD_SUSP, &p->rfd_top->last); /* maybe exchange by RFD_LAST */
                writew(0xffff, &p->rfd_top->rbd_offset);
                writeb(0, &p->rfd_last->last);  /* delete RFD_SUSP      */
                p->rfd_last = p->rfd_top;
                p->rfd_top = (struct rfd_struct *) make32(p->rfd_top->next); /* step to next RFD */
                writew(make16(p->rfd_top), &p->scb->rfa_offset);

                if (debuglevel > 0)
                        printk("%d", cnt++);
        }

        if (automatic_resume) {
                wait_for_scb_cmd(dev);
                writeb(RUC_RESUME, &p->scb->cmd_ruc);
                ni_attn586();
                wait_for_scb_cmd_ruc(dev);
        }

#ifdef WAIT_4_BUSY
        {
                int i;
                for (i = 0; i < 1024; i++) {
                        if (p->rfd_top->status)
                                break;
                        udelay(16);
                        if (i == 1023)
                                printk(KERN_ERR "%s: RU hasn't fetched next RFD (not busy/complete)\n", dev->name);
                }
        }
#endif
        if (debuglevel > 0)
                printk("r");
}

/**********************************************************
 * handle 'Receiver went not ready'.
 */

static void ni52_rnr_int(struct net_device *dev)
{
        struct priv *p = (struct priv *) dev->priv;

        p->stats.rx_errors++;

        wait_for_scb_cmd(dev);          /* wait for the last cmd, WAIT_4_FULLSTAT?? */
        writeb(RUC_ABORT, &p->scb->cmd_ruc); /* usually the RU is in the 'no resource'-state .. abort it now. */
        ni_attn586();
        wait_for_scb_cmd_ruc(dev);              /* wait for accept cmd. */

        alloc_rfa(dev, (char *)p->rfd_first);
        /* maybe add a check here, before restarting the RU */
        startrecv586(dev); /* restart RU */

        printk(KERN_ERR "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->rus);

}

/**********************************************************
 * handle xmit - interrupt
 */

static void ni52_xmt_int(struct net_device *dev)
{
        int status;
        struct priv *p = (struct priv *) dev->priv;

        if (debuglevel > 0)
                printk("X");

        status = readw(&p->xmit_cmds[p->xmit_last]->cmd_status);
        if (!(status & STAT_COMPL))
                printk(KERN_ERR "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);

        if (status & STAT_OK) {
                p->stats.tx_packets++;
                p->stats.collisions += (status & TCMD_MAXCOLLMASK);
        } else {
                p->stats.tx_errors++;
                if (status & TCMD_LATECOLL) {
                        printk(KERN_ERR "%s: late collision detected.\n",
                                dev->name);
                        p->stats.collisions++;
                } else if (status & TCMD_NOCARRIER) {
                        p->stats.tx_carrier_errors++;
                        printk(KERN_ERR "%s: no carrier detected.\n",
                                dev->name);
                } else if (status & TCMD_LOSTCTS)
                        printk(KERN_ERR "%s: loss of CTS detected.\n",
                                dev->name);
                else if (status & TCMD_UNDERRUN) {
                        p->stats.tx_fifo_errors++;
                        printk(KERN_ERR "%s: DMA underrun detected.\n",
                                dev->name);
                } else if (status & TCMD_MAXCOLL) {
                        printk(KERN_ERR "%s: Max. collisions exceeded.\n",
                                dev->name);
                        p->stats.collisions += 16;
                }
        }
#if (NUM_XMIT_BUFFS > 1)
        if ((++p->xmit_last) == NUM_XMIT_BUFFS)
                p->xmit_last = 0;
#endif
        netif_wake_queue(dev);
}

/***********************************************************
 * (re)start the receiver
 */

static void startrecv586(struct net_device *dev)
{
        struct priv *p = (struct priv *) dev->priv;

        wait_for_scb_cmd(dev);
        wait_for_scb_cmd_ruc(dev);
        writew(make16(p->rfd_first), &p->scb->rfa_offset);
        writeb(RUC_START, &p->scb->cmd_ruc);
        ni_attn586();           /* start cmd. */
        wait_for_scb_cmd_ruc(dev);
        /* wait for accept cmd. (no timeout!!) */
}

static void ni52_timeout(struct net_device *dev)
{
        struct priv *p = (struct priv *) dev->priv;
#ifndef NO_NOPCOMMANDS
        if (readb(&p->scb->cus) & CU_ACTIVE) { /* COMMAND-UNIT active? */
                netif_wake_queue(dev);
#ifdef DEBUG
                printk(KERN_ERR "%s: strange ... timeout with CU active?!?\n",
                        dev->name);
                printk(KERN_ERR "%s: X0: %04x N0: %04x N1: %04x %d\n",
                        dev->name, (int)p->xmit_cmds[0]->cmd_status,
                        readw(&p->nop_cmds[0]->cmd_status),
                        readw(&p->nop_cmds[1]->cmd_status),
                        p->nop_point);
#endif
                writeb(CUC_ABORT, &p->scb->cmd_cuc);
                ni_attn586();
                wait_for_scb_cmd(dev);
                writew(make16(p->nop_cmds[p->nop_point]), &p->scb->cbl_offset);
                writeb(CUC_START, &p->scb->cmd_cuc);
                ni_attn586();
                wait_for_scb_cmd(dev);
                dev->trans_start = jiffies;
                return 0;
        }
#endif
        {
#ifdef DEBUG
                printk(KERN_ERR "%s: xmitter timed out, try to restart! stat: %02x\n",
                                dev->name, readb(&p->scb->cus));
                printk(KERN_ERR "%s: command-stats: %04x %04x\n",
                                dev->name,
                                readw(&p->xmit_cmds[0]->cmd_status),
                                readw(&p->xmit_cmds[1]->cmd_status));
                printk(KERN_ERR "%s: check, whether you set the right interrupt number!\n",
                                dev->name);
#endif
                ni52_close(dev);
                ni52_open(dev);
        }
        dev->trans_start = jiffies;
}

/******************************************************
 * send frame
 */

static int ni52_send_packet(struct sk_buff *skb, struct net_device *dev)
{
        int len, i;
#ifndef NO_NOPCOMMANDS
        int next_nop;
#endif
        struct priv *p = (struct priv *) dev->priv;

        if (skb->len > XMIT_BUFF_SIZE) {
                printk(KERN_ERR "%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n", dev->name, XMIT_BUFF_SIZE, skb->len);
                return 0;
        }

        netif_stop_queue(dev);

        skb_copy_from_linear_data(skb, (char *)p->xmit_cbuffs[p->xmit_count],
                                                        skb->len);
        len = skb->len;
        if (len < ETH_ZLEN) {
                len = ETH_ZLEN;
                memset((char *)p->xmit_cbuffs[p->xmit_count]+skb->len, 0,
                                                        len - skb->len);
        }

#if (NUM_XMIT_BUFFS == 1)
#       ifdef NO_NOPCOMMANDS

#ifdef DEBUG
        if (p->scb->cus & CU_ACTIVE) {
                printk(KERN_ERR "%s: Hmmm .. CU is still running and we wanna send a new packet.\n", dev->name);
                printk(KERN_ERR "%s: stat: %04x %04x\n",
                                dev->name, readb(&p->scb->cus),
                                readw(&p->xmit_cmds[0]->cmd_status));
        }
#endif
        writew(TBD_LAST | len, &p->xmit_buffs[0]->size);;
        for (i = 0; i < 16; i++) {
                writew(0, &p->xmit_cmds[0]->cmd_status);
                wait_for_scb_cmd(dev);
                if ((readb(&p->scb->cus) & CU_STATUS) == CU_SUSPEND)
                        writeb(CUC_RESUME, &p->scb->cmd_cuc);
                else {
                        writew(make16(p->xmit_cmds[0]), &p->scb->cbl_offset);
                        writeb(CUC_START, &p->scb->cmd_cuc);
                }
                ni_attn586();
                dev->trans_start = jiffies;
                if (!i)
                        dev_kfree_skb(skb);
                wait_for_scb_cmd(dev);
                /* test it, because CU sometimes doesn't start immediately */
                if (readb(&p->scb->cus) & CU_ACTIVE)
                        break;
                if (readw(&p->xmit_cmds[0]->cmd_status))
                        break;
                if (i == 15)
                        printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
        }
#       else
        next_nop = (p->nop_point + 1) & 0x1;
        writew(TBD_LAST | len, &p->xmit_buffs[0]->size);
        writew(make16(p->nop_cmds[next_nop]), &p->xmit_cmds[0]->cmd_link);
        writew(make16(p->nop_cmds[next_nop]),
                                &p->nop_cmds[next_nop]->cmd_link);
        writew(0, &p->xmit_cmds[0]->cmd_status);
        writew(0, &p->nop_cmds[next_nop]->cmd_status);

        writew(make16(p->xmit_cmds[0]), &p->nop_cmds[p->nop_point]->cmd_link);
        dev->trans_start = jiffies;
        p->nop_point = next_nop;
        dev_kfree_skb(skb);
#       endif
#else
        writew(TBD_LAST | len, &p->xmit_buffs[p->xmit_count]->size);
        next_nop = p->xmit_count + 1
        if (next_nop == NUM_XMIT_BUFFS)
                next_nop = 0;
        writew(0, &p->xmit_cmds[p->xmit_count]->cmd_status);
        /* linkpointer of xmit-command already points to next nop cmd */
        writew(make16(p->nop_cmds[next_nop]),
                                &p->nop_cmds[next_nop]->cmd_link);
        writew(0, &p->nop_cmds[next_nop]->cmd_status);
        writew(make16(p->xmit_cmds[p->xmit_count]),
                                &p->nop_cmds[p->xmit_count]->cmd_link);
        dev->trans_start = jiffies;
        p->xmit_count = next_nop;
        {
                unsigned long flags;
                spin_lock_irqsave(&p->spinlock);
                if (p->xmit_count != p->xmit_last)
                        netif_wake_queue(dev);
                spin_unlock_irqrestore(&p->spinlock);
        }
        dev_kfree_skb(skb);
#endif
        return 0;
}

/*******************************************
 * Someone wanna have the statistics
 */

static struct net_device_stats *ni52_get_stats(struct net_device *dev)
{
        struct priv *p = (struct priv *) dev->priv;
        unsigned short crc, aln, rsc, ovrn;

        /* Get error-statistics from the ni82586 */
        crc = readw(&p->scb->crc_errs);
        writew(0, &p->scb->crc_errs);
        aln = readw(&p->scb->aln_errs);
        writew(0, &p->scb->aln_errs);
        rsc = readw(&p->scb->rsc_errs);
        writew(0, &p->scb->rsc_errs);
        ovrn = readw(&p->scb->ovrn_errs);
        writew(0, &p->scb->ovrn_errs);

        p->stats.rx_crc_errors += crc;
        p->stats.rx_fifo_errors += ovrn;
        p->stats.rx_frame_errors += aln;
        p->stats.rx_dropped += rsc;

        return &p->stats;
}

/********************************************************
 * Set MC list ..
 */

static void set_multicast_list(struct net_device *dev)
{
        netif_stop_queue(dev);
        ni_disint();
        alloc586(dev);
        init586(dev);
        startrecv586(dev);
        ni_enaint();
        netif_wake_queue(dev);
}

#ifdef MODULE
static struct net_device *dev_ni52;

module_param(io, int, 0);
module_param(irq, int, 0);
module_param(memstart, long, 0);
module_param(memend, long, 0);
MODULE_PARM_DESC(io, "NI5210 I/O base address,required");
MODULE_PARM_DESC(irq, "NI5210 IRQ number,required");
MODULE_PARM_DESC(memstart, "NI5210 memory base address,required");
MODULE_PARM_DESC(memend, "NI5210 memory end address,required");

int __init init_module(void)
{
        if (io <= 0x0 || !memend || !memstart || irq < 2) {
                printk(KERN_ERR "ni52: Autoprobing not allowed for modules.\n");
                printk(KERN_ERR "ni52: Set symbols 'io' 'irq' 'memstart' and 'memend'\n");
                return -ENODEV;
        }
        dev_ni52 = ni52_probe(-1);
        if (IS_ERR(dev_ni52))
                return PTR_ERR(dev_ni52);
        return 0;
}

void __exit cleanup_module(void)
{
        unregister_netdev(dev_ni52);
        release_region(dev_ni52->base_addr, NI52_TOTAL_SIZE);
        free_netdev(dev_ni52);
}
#endif /* MODULE */

MODULE_LICENSE("GPL");

/*
 * END: linux/drivers/net/ni52.c
 */