?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/kvm.git] / drivers / scsi / eata_generic.h
blob34bce2c9e92e5bb3633b0b9d71e53a76cbd44d3c
1 /********************************************************
2 * Header file for eata_dma.c and eata_pio.c *
3 * Linux EATA SCSI drivers *
4 * (c) 1993-96 Michael Neuffer *
5 * mike@i-Connect.Net *
6 * neuffer@mail.uni-mainz.de *
7 *********************************************************
8 * last change: 96/08/14 *
9 ********************************************************/
10
11
12 #ifndef _EATA_GENERIC_H
13 #define _EATA_GENERIC_H
14
15
16
17 /*********************************************
18 * Misc. definitions *
19 *********************************************/
20
21 #ifndef TRUE
22 #define TRUE 1
23 #endif
24 #ifndef FALSE
25 #define FALSE 0
26 #endif
27
28 #define R_LIMIT 0x20000
29
30 #define MAXISA 4
31 #define MAXEISA 16
32 #define MAXPCI 16
33 #define MAXIRQ 16
34 #define MAXTARGET 16
35 #define MAXCHANNEL 3
36
37 #define IS_ISA 'I'
38 #define IS_EISA 'E'
39 #define IS_PCI 'P'
40
41 #define BROKEN_INQUIRY 1
42
43 #define BUSMASTER 0xff
44 #define PIO 0xfe
45
46 #define EATA_SIGNATURE 0x45415441 /* BIG ENDIAN coded "EATA" sig. */
47
48 #define DPT_ID1 0x12
49 #define DPT_ID2 0x14
50
51 #define ATT_ID1 0x06
52 #define ATT_ID2 0x94
53 #define ATT_ID3 0x0
54
55 #define NEC_ID1 0x38
56 #define NEC_ID2 0xa3
57 #define NEC_ID3 0x82
58
59
60 #define EATA_CP_SIZE 44
61
62 #define MAX_PCI_DEVICES 32 /* Maximum # Of Devices Per Bus */
63 #define MAX_METHOD_2 16 /* Max Devices For Method 2 */
64 #define MAX_PCI_BUS 16 /* Maximum # Of Busses Allowed */
65
66 #define SG_SIZE 64
67 #define SG_SIZE_BIG 252 /* max. 8096 elements, 64k */
68
69 #define UPPER_DEVICE_QUEUE_LIMIT 64 /* The limit we have to set for the
70 * device queue to keep the broken
71 * midlevel SCSI code from producing
72 * bogus timeouts
73 */
74
75 #define TYPE_DISK_QUEUE 16
76 #define TYPE_TAPE_QUEUE 4
77 #define TYPE_ROM_QUEUE 4
78 #define TYPE_OTHER_QUEUE 2
79
80 #define FREE 0
81 #define OK 0
82 #define NO_TIMEOUT 0
83 #define USED 1
84 #define TIMEOUT 2
85 #define RESET 4
86 #define LOCKED 8
87 #define ABORTED 16
88
89 #define READ 0
90 #define WRITE 1
91 #define OTHER 2
92
93 #define HD(cmd) ((hostdata *)&(cmd->device->host->hostdata))
94 #define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble))
95 #define SD(host) ((hostdata *)&(host->hostdata))
96
97 /***********************************************
98 * EATA Command & Register definitions *
99 ***********************************************/
100 #define PCI_REG_DPTconfig 0x40
101 #define PCI_REG_PumpModeAddress 0x44
102 #define PCI_REG_PumpModeData 0x48
103 #define PCI_REG_ConfigParam1 0x50
104 #define PCI_REG_ConfigParam2 0x54
105
106
107 #define EATA_CMD_PIO_SETUPTEST 0xc6
108 #define EATA_CMD_PIO_READ_CONFIG 0xf0
109 #define EATA_CMD_PIO_SET_CONFIG 0xf1
110 #define EATA_CMD_PIO_SEND_CP 0xf2
111 #define EATA_CMD_PIO_RECEIVE_SP 0xf3
112 #define EATA_CMD_PIO_TRUNC 0xf4
113
114 #define EATA_CMD_RESET 0xf9
115 #define EATA_CMD_IMMEDIATE 0xfa
116
117 #define EATA_CMD_DMA_READ_CONFIG 0xfd
118 #define EATA_CMD_DMA_SET_CONFIG 0xfe
119 #define EATA_CMD_DMA_SEND_CP 0xff
120
121 #define ECS_EMULATE_SENSE 0xd4
122
123 #define EATA_GENERIC_ABORT 0x00
124 #define EATA_SPECIFIC_RESET 0x01
125 #define EATA_BUS_RESET 0x02
126 #define EATA_SPECIFIC_ABORT 0x03
127 #define EATA_QUIET_INTR 0x04
128 #define EATA_COLD_BOOT_HBA 0x06 /* Only as a last resort */
129 #define EATA_FORCE_IO 0x07
130
131 #define HA_CTRLREG 0x206 /* control register for HBA */
132 #define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */
133 #define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processor */
134 #define HA_CTRL_8HEADS 0x08 /* CTRLREG: set for drives with*
135 * >=8 heads (WD1003 rudimentary :-) */
136
137 #define HA_WCOMMAND 0x07 /* command register offset */
138 #define HA_WIFC 0x06 /* immediate command offset */
139 #define HA_WCODE 0x05
140 #define HA_WCODE2 0x04
141 #define HA_WDMAADDR 0x02 /* DMA address LSB offset */
142 #define HA_RAUXSTAT 0x08 /* aux status register offset*/
143 #define HA_RSTATUS 0x07 /* status register offset */
144 #define HA_RDATA 0x00 /* data register (16bit) */
145 #define HA_WDATA 0x00 /* data register (16bit) */
146
147 #define HA_ABUSY 0x01 /* aux busy bit */
148 #define HA_AIRQ 0x02 /* aux IRQ pending bit */
149 #define HA_SERROR 0x01 /* pr. command ended in error*/
150 #define HA_SMORE 0x02 /* more data soon to come */
151 #define HA_SCORR 0x04 /* data corrected */
152 #define HA_SDRQ 0x08 /* data request active */
153 #define HA_SSC 0x10 /* seek complete */
154 #define HA_SFAULT 0x20 /* write fault */
155 #define HA_SREADY 0x40 /* drive ready */
156 #define HA_SBUSY 0x80 /* drive busy */
157 #define HA_SDRDY HA_SSC+HA_SREADY+HA_SDRQ
158
159 /**********************************************
160 * Message definitions *
161 **********************************************/
162
163 #define HA_NO_ERROR 0x00 /* No Error */
164 #define HA_ERR_SEL_TO 0x01 /* Selection Timeout */
165 #define HA_ERR_CMD_TO 0x02 /* Command Timeout */
166 #define HA_BUS_RESET 0x03 /* SCSI Bus Reset Received */
167 #define HA_INIT_POWERUP 0x04 /* Initial Controller Power-up */
168 #define HA_UNX_BUSPHASE 0x05 /* Unexpected Bus Phase */
169 #define HA_UNX_BUS_FREE 0x06 /* Unexpected Bus Free */
170 #define HA_BUS_PARITY 0x07 /* Bus Parity Error */
171 #define HA_SCSI_HUNG 0x08 /* SCSI Hung */
172 #define HA_UNX_MSGRJCT 0x09 /* Unexpected Message Rejected */
173 #define HA_RESET_STUCK 0x0a /* SCSI Bus Reset Stuck */
174 #define HA_RSENSE_FAIL 0x0b /* Auto Request-Sense Failed */
175 #define HA_PARITY_ERR 0x0c /* Controller Ram Parity Error */
176 #define HA_CP_ABORT_NA 0x0d /* Abort Message sent to non-active cmd */
177 #define HA_CP_ABORTED 0x0e /* Abort Message sent to active cmd */
178 #define HA_CP_RESET_NA 0x0f /* Reset Message sent to non-active cmd */
179 #define HA_CP_RESET 0x10 /* Reset Message sent to active cmd */
180 #define HA_ECC_ERR 0x11 /* Controller Ram ECC Error */
181 #define HA_PCI_PARITY 0x12 /* PCI Parity Error */
182 #define HA_PCI_MABORT 0x13 /* PCI Master Abort */
183 #define HA_PCI_TABORT 0x14 /* PCI Target Abort */
184 #define HA_PCI_STABORT 0x15 /* PCI Signaled Target Abort */
185
186 /**********************************************
187 * Other definitions *
188 **********************************************/
189
190 struct reg_bit { /* reading this one will clear the interrupt */
191 __u8 error:1; /* previous command ended in an error */
192 __u8 more:1; /* more DATA coming soon, poll BSY & DRQ (PIO) */
193 __u8 corr:1; /* data read was successfully corrected with ECC*/
194 __u8 drq:1; /* data request active */
195 __u8 sc:1; /* seek complete */
196 __u8 fault:1; /* write fault */
197 __u8 ready:1; /* drive ready */
198 __u8 busy:1; /* controller busy */
199 };
200
201 struct reg_abit { /* reading this won't clear the interrupt */
202 __u8 abusy:1; /* auxiliary busy */
203 __u8 irq:1; /* set when drive interrupt is asserted */
204 __u8 dummy:6;
205 };
206
207 struct eata_register { /* EATA register set */
208 __u8 data_reg[2]; /* R, couldn't figure this one out */
209 __u8 cp_addr[4]; /* W, CP address register */
210 union {
211 __u8 command; /* W, command code: [read|set] conf, send CP*/
212 struct reg_bit status; /* R, see register_bit1 */
213 __u8 statusbyte;
214 } ovr;
215 struct reg_abit aux_stat; /* R, see register_bit2 */
216 };
217
218 struct get_conf { /* Read Configuration Array */
219 __u32 len; /* Should return 0x22, 0x24, etc */
220 __u32 signature; /* Signature MUST be "EATA" */
221 __u8 version2:4,
222 version:4; /* EATA Version level */
223 __u8 OCS_enabled:1, /* Overlap Command Support enabled */
224 TAR_support:1, /* SCSI Target Mode supported */
225 TRNXFR:1, /* Truncate Transfer Cmd not necessary *
226 * Only used in PIO Mode */
227 MORE_support:1, /* MORE supported (only PIO Mode) */
228 DMA_support:1, /* DMA supported Driver uses only *
229 * this mode */
230 DMA_valid:1, /* DRQ value in Byte 30 is valid */
231 ATA:1, /* ATA device connected (not supported) */
232 HAA_valid:1; /* Hostadapter Address is valid */
233
234 __u16 cppadlen; /* Number of pad bytes send after CD data *
235 * set to zero for DMA commands */
236 __u8 scsi_id[4]; /* SCSI ID of controller 2-0 Byte 0 res. *
237 * if not, zero is returned */
238 __u32 cplen; /* CP length: number of valid cp bytes */
239 __u32 splen; /* Number of bytes returned after *
240 * Receive SP command */
241 __u16 queuesiz; /* max number of queueable CPs */
242 __u16 dummy;
243 __u16 SGsiz; /* max number of SG table entries */
244 __u8 IRQ:4, /* IRQ used this HA */
245 IRQ_TR:1, /* IRQ Trigger: 0=edge, 1=level */
246 SECOND:1, /* This is a secondary controller */
247 DMA_channel:2; /* DRQ index, DRQ is 2comp of DRQX */
248 __u8 sync; /* device at ID 7 tru 0 is running in *
249 * synchronous mode, this will disappear */
250 __u8 DSBLE:1, /* ISA i/o addressing is disabled */
251 FORCADR:1, /* i/o address has been forced */
252 SG_64K:1,
253 SG_UAE:1,
254 :4;
255 __u8 MAX_ID:5, /* Max number of SCSI target IDs */
256 MAX_CHAN:3; /* Number of SCSI busses on HBA */
257 __u8 MAX_LUN; /* Max number of LUNs */
258 __u8 :3,
259 AUTOTRM:1,
260 M1_inst:1,
261 ID_qest:1, /* Raidnum ID is questionable */
262 is_PCI:1, /* HBA is PCI */
263 is_EISA:1; /* HBA is EISA */
264 __u8 RAIDNUM; /* unique HBA identifier */
265 __u8 unused[474];
266 };
267
268 struct eata_sg_list
269 {
270 __u32 data;
271 __u32 len;
272 };
273
274 struct eata_ccb { /* Send Command Packet structure */
275
276 __u8 SCSI_Reset:1, /* Cause a SCSI Bus reset on the cmd */
277 HBA_Init:1, /* Cause Controller to reinitialize */
278 Auto_Req_Sen:1, /* Do Auto Request Sense on errors */
279 scatter:1, /* Data Ptr points to a SG Packet */
280 Resrvd:1, /* RFU */
281 Interpret:1, /* Interpret the SCSI cdb of own use */
282 DataOut:1, /* Data Out phase with command */
283 DataIn:1; /* Data In phase with command */
284 __u8 reqlen; /* Request Sense Length *
285 * Valid if Auto_Req_Sen=1 */
286 __u8 unused[3];
287 __u8 FWNEST:1, /* send cmd to phys RAID component */
288 unused2:7;
289 __u8 Phsunit:1, /* physical unit on mirrored pair */
290 I_AT:1, /* inhibit address translation */
291 I_HBA_C:1, /* HBA inhibit caching */
292 unused3:5;
293
294 __u8 cp_id:5, /* SCSI Device ID of target */
295 cp_channel:3; /* SCSI Channel # of HBA */
296 __u8 cp_lun:3,
297 :2,
298 cp_luntar:1, /* CP is for target ROUTINE */
299 cp_dispri:1, /* Grant disconnect privilege */
300 cp_identify:1; /* Always TRUE */
301 __u8 cp_msg1; /* Message bytes 0-3 */
302 __u8 cp_msg2;
303 __u8 cp_msg3;
304 __u8 cp_cdb[12]; /* Command Descriptor Block */
305 __u32 cp_datalen; /* Data Transfer Length *
306 * If scatter=1 len of sg package */
307 void *cp_viraddr; /* address of this ccb */
308 __u32 cp_dataDMA; /* Data Address, if scatter=1 *
309 * address of scatter packet */
310 __u32 cp_statDMA; /* address for Status Packet */
311 __u32 cp_reqDMA; /* Request Sense Address, used if *
312 * CP command ends with error */
313 /* Additional CP info begins here */
314 __u32 timestamp; /* Needed to measure command latency */
315 __u32 timeout;
316 __u8 sizeindex;
317 __u8 rw_latency;
318 __u8 retries;
319 __u8 status; /* status of this queueslot */
320 struct scsi_cmnd *cmd; /* address of cmd */
321 struct eata_sg_list *sg_list;
322 };
323
324
325 struct eata_sp {
326 __u8 hba_stat:7, /* HBA status */
327 EOC:1; /* True if command finished */
328 __u8 scsi_stat; /* Target SCSI status */
329 __u8 reserved[2];
330 __u32 residue_len; /* Number of bytes not transferred */
331 struct eata_ccb *ccb; /* Address set in COMMAND PACKET */
332 __u8 msg[12];
333 };
334
335 typedef struct hstd {
336 __u8 vendor[9];
337 __u8 name[18];
338 __u8 revision[6];
339 __u8 EATA_revision;
340 __u32 firmware_revision;
341 __u8 HBA_number;
342 __u8 bustype; /* bustype of HBA */
343 __u8 channel; /* # of avail. scsi channels */
344 __u8 state; /* state of HBA */
345 __u8 primary; /* true if primary */
346 __u8 more_support:1, /* HBA supports MORE flag */
347 immediate_support:1, /* HBA supports IMMEDIATE CMDs*/
348 broken_INQUIRY:1; /* This is an EISA HBA with *
349 * broken INQUIRY */
350 __u8 do_latency; /* Latency measurement flag */
351 __u32 reads[13];
352 __u32 writes[13];
353 __u32 reads_lat[12][4];
354 __u32 writes_lat[12][4];
355 __u32 all_lat[4];
356 __u8 resetlevel[MAXCHANNEL];
357 __u32 last_ccb; /* Last used ccb */
358 __u32 cplen; /* size of CP in words */
359 __u16 cppadlen; /* pad length of cp in words */
360 __u16 queuesize;
361 __u16 sgsize; /* # of entries in the SG list*/
362 __u16 devflags; /* bits set for detected devices */
363 __u8 hostid; /* SCSI ID of HBA */
364 __u8 moresupport; /* HBA supports MORE flag */
365 struct Scsi_Host *next;
366 struct Scsi_Host *prev;
367 struct eata_sp sp; /* status packet */
368 struct eata_ccb ccb[0]; /* ccb array begins here */
369 }hostdata;
370
371 /* structure for max. 2 emulated drives */
372 struct drive_geom_emul {
373 __u8 trans; /* translation flag 1=transl */
374 __u8 channel; /* SCSI channel number */
375 __u8 HBA; /* HBA number (prim/sec) */
376 __u8 id; /* drive id */
377 __u8 lun; /* drive lun */
378 __u32 heads; /* number of heads */
379 __u32 sectors; /* number of sectors */
380 __u32 cylinder; /* number of cylinders */
381 };
382
383 struct geom_emul {
384 __u8 bios_drives; /* number of emulated drives */
385 struct drive_geom_emul drv[2]; /* drive structures */
386 };
387
388 #endif /* _EATA_GENERIC_H */
389
390 /*
391 * Overrides for Emacs so that we almost follow Linus's tabbing style.
392 * Emacs will notice this stuff at the end of the file and automatically
393 * adjust the settings for this buffer only. This must remain at the end
394 * of the file.
395 * ---------------------------------------------------------------------------
396 * Local variables:
397 * c-indent-level: 4
398 * c-brace-imaginary-offset: 0
399 * c-brace-offset: -4
400 * c-argdecl-indent: 4
401 * c-label-offset: -4
402 * c-continued-statement-offset: 4
403 * c-continued-brace-offset: 0
404 * tab-width: 8
405 * End:
406 */
kernel-based virtual machine