1 /*********************************************************************
3 * sir_kthread.c: dedicated thread to process scheduled
4 * sir device setup requests
6 * Copyright (c) 2002 Martin Diehl
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 ********************************************************************/
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/version.h>
18 #include <linux/init.h>
19 #include <linux/smp_lock.h>
20 #include <linux/completion.h>
21 #include <linux/delay.h>
23 #include <net/irda/irda.h>
27 /**************************************************************************
29 * kIrDAd kernel thread and config state machine
33 struct irda_request_queue
{
34 struct list_head request_list
;
37 struct completion exit
;
38 wait_queue_head_t kick
, done
;
42 static struct irda_request_queue irda_rq_queue
;
44 static int irda_queue_request(struct irda_request
*rq
)
49 if (!test_and_set_bit(0, &rq
->pending
)) {
50 spin_lock_irqsave(&irda_rq_queue
.lock
, flags
);
51 list_add_tail(&rq
->lh_request
, &irda_rq_queue
.request_list
);
52 wake_up(&irda_rq_queue
.kick
);
53 atomic_inc(&irda_rq_queue
.num_pending
);
54 spin_unlock_irqrestore(&irda_rq_queue
.lock
, flags
);
60 static void irda_request_timer(unsigned long data
)
62 struct irda_request
*rq
= (struct irda_request
*)data
;
65 spin_lock_irqsave(&irda_rq_queue
.lock
, flags
);
66 list_add_tail(&rq
->lh_request
, &irda_rq_queue
.request_list
);
67 wake_up(&irda_rq_queue
.kick
);
68 spin_unlock_irqrestore(&irda_rq_queue
.lock
, flags
);
71 static int irda_queue_delayed_request(struct irda_request
*rq
, unsigned long delay
)
74 struct timer_list
*timer
= &rq
->timer
;
76 if (!test_and_set_bit(0, &rq
->pending
)) {
77 timer
->expires
= jiffies
+ delay
;
78 timer
->function
= irda_request_timer
;
79 timer
->data
= (unsigned long)rq
;
80 atomic_inc(&irda_rq_queue
.num_pending
);
87 static void run_irda_queue(void)
90 struct list_head
*entry
, *tmp
;
91 struct irda_request
*rq
;
93 spin_lock_irqsave(&irda_rq_queue
.lock
, flags
);
94 list_for_each_safe(entry
, tmp
, &irda_rq_queue
.request_list
) {
95 rq
= list_entry(entry
, struct irda_request
, lh_request
);
97 spin_unlock_irqrestore(&irda_rq_queue
.lock
, flags
);
99 clear_bit(0, &rq
->pending
);
102 if (atomic_dec_and_test(&irda_rq_queue
.num_pending
))
103 wake_up(&irda_rq_queue
.done
);
105 spin_lock_irqsave(&irda_rq_queue
.lock
, flags
);
107 spin_unlock_irqrestore(&irda_rq_queue
.lock
, flags
);
110 static int irda_thread(void *startup
)
112 DECLARE_WAITQUEUE(wait
, current
);
116 irda_rq_queue
.thread
= current
;
118 complete((struct completion
*)startup
);
120 while (irda_rq_queue
.thread
!= NULL
) {
122 /* We use TASK_INTERRUPTIBLE, rather than
123 * TASK_UNINTERRUPTIBLE. Andrew Morton made this
124 * change ; he told me that it is safe, because "signal
125 * blocking is now handled in daemonize()", he added
126 * that the problem is that "uninterruptible sleep
127 * contributes to load average", making user worry.
129 set_task_state(current
, TASK_INTERRUPTIBLE
);
130 add_wait_queue(&irda_rq_queue
.kick
, &wait
);
131 if (list_empty(&irda_rq_queue
.request_list
))
134 __set_task_state(current
, TASK_RUNNING
);
135 remove_wait_queue(&irda_rq_queue
.kick
, &wait
);
137 /* make swsusp happy with our thread */
138 if (current
->flags
& PF_FREEZE
)
139 refrigerator(PF_FREEZE
);
144 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
147 complete_and_exit(&irda_rq_queue
.exit
, 0);
153 static void flush_irda_queue(void)
155 if (atomic_read(&irda_rq_queue
.num_pending
)) {
157 DECLARE_WAITQUEUE(wait
, current
);
159 if (!list_empty(&irda_rq_queue
.request_list
))
162 set_task_state(current
, TASK_UNINTERRUPTIBLE
);
163 add_wait_queue(&irda_rq_queue
.done
, &wait
);
164 if (atomic_read(&irda_rq_queue
.num_pending
))
167 __set_task_state(current
, TASK_RUNNING
);
168 remove_wait_queue(&irda_rq_queue
.done
, &wait
);
172 /* substate handler of the config-fsm to handle the cases where we want
173 * to wait for transmit completion before changing the port configuration
176 static int irda_tx_complete_fsm(struct sir_dev
*dev
)
178 struct sir_fsm
*fsm
= &dev
->fsm
;
179 unsigned next_state
, delay
;
183 next_state
= fsm
->substate
; /* default: stay in current substate */
186 switch(fsm
->substate
) {
188 case SIRDEV_STATE_WAIT_XMIT
:
189 if (dev
->drv
->chars_in_buffer
)
190 bytes_left
= dev
->drv
->chars_in_buffer(dev
);
194 next_state
= SIRDEV_STATE_WAIT_UNTIL_SENT
;
198 if (dev
->speed
> 115200)
199 delay
= (bytes_left
*8*10000) / (dev
->speed
/100);
200 else if (dev
->speed
> 0)
201 delay
= (bytes_left
*10*10000) / (dev
->speed
/100);
204 /* expected delay (usec) until remaining bytes are sent */
210 /* sleep some longer delay (msec) */
211 delay
= (delay
+999) / 1000;
214 case SIRDEV_STATE_WAIT_UNTIL_SENT
:
215 /* block until underlaying hardware buffer are empty */
216 if (dev
->drv
->wait_until_sent
)
217 dev
->drv
->wait_until_sent(dev
);
218 next_state
= SIRDEV_STATE_TX_DONE
;
221 case SIRDEV_STATE_TX_DONE
:
225 IRDA_ERROR("%s - undefined state\n", __FUNCTION__
);
228 fsm
->substate
= next_state
;
229 } while (delay
== 0);
234 * Function irda_config_fsm
236 * State machine to handle the configuration of the device (and attached dongle, if any).
237 * This handler is scheduled for execution in kIrDAd context, so we can sleep.
238 * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
239 * long. Instead, for longer delays we start a timer to reschedule us later.
240 * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
241 * Both must be unlocked/restarted on completion - but only on final exit.
244 static void irda_config_fsm(void *data
)
246 struct sir_dev
*dev
= data
;
247 struct sir_fsm
*fsm
= &dev
->fsm
;
252 IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__
, jiffies
);
255 IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
256 __FUNCTION__
, fsm
->state
, fsm
->substate
);
258 next_state
= fsm
->state
;
263 case SIRDEV_STATE_DONGLE_OPEN
:
264 if (dev
->dongle_drv
!= NULL
) {
265 ret
= sirdev_put_dongle(dev
);
267 fsm
->result
= -EINVAL
;
268 next_state
= SIRDEV_STATE_ERROR
;
273 /* Initialize dongle */
274 ret
= sirdev_get_dongle(dev
, fsm
->param
);
277 next_state
= SIRDEV_STATE_ERROR
;
281 /* Dongles are powered through the modem control lines which
282 * were just set during open. Before resetting, let's wait for
283 * the power to stabilize. This is what some dongle drivers did
284 * in open before, while others didn't - should be safe anyway.
288 fsm
->substate
= SIRDEV_STATE_DONGLE_RESET
;
289 next_state
= SIRDEV_STATE_DONGLE_RESET
;
295 case SIRDEV_STATE_DONGLE_CLOSE
:
296 /* shouldn't we just treat this as success=? */
297 if (dev
->dongle_drv
== NULL
) {
298 fsm
->result
= -EINVAL
;
299 next_state
= SIRDEV_STATE_ERROR
;
303 ret
= sirdev_put_dongle(dev
);
306 next_state
= SIRDEV_STATE_ERROR
;
309 next_state
= SIRDEV_STATE_DONE
;
312 case SIRDEV_STATE_SET_DTR_RTS
:
313 ret
= sirdev_set_dtr_rts(dev
,
314 (fsm
->param
&0x02) ? TRUE
: FALSE
,
315 (fsm
->param
&0x01) ? TRUE
: FALSE
);
316 next_state
= SIRDEV_STATE_DONE
;
319 case SIRDEV_STATE_SET_SPEED
:
320 fsm
->substate
= SIRDEV_STATE_WAIT_XMIT
;
321 next_state
= SIRDEV_STATE_DONGLE_CHECK
;
324 case SIRDEV_STATE_DONGLE_CHECK
:
325 ret
= irda_tx_complete_fsm(dev
);
328 next_state
= SIRDEV_STATE_ERROR
;
331 if ((delay
=ret
) != 0)
334 if (dev
->dongle_drv
) {
335 fsm
->substate
= SIRDEV_STATE_DONGLE_RESET
;
336 next_state
= SIRDEV_STATE_DONGLE_RESET
;
339 dev
->speed
= fsm
->param
;
340 next_state
= SIRDEV_STATE_PORT_SPEED
;
344 case SIRDEV_STATE_DONGLE_RESET
:
345 if (dev
->dongle_drv
->reset
) {
346 ret
= dev
->dongle_drv
->reset(dev
);
349 next_state
= SIRDEV_STATE_ERROR
;
355 if ((delay
=ret
) == 0) {
356 /* set serial port according to dongle default speed */
357 if (dev
->drv
->set_speed
)
358 dev
->drv
->set_speed(dev
, dev
->speed
);
359 fsm
->substate
= SIRDEV_STATE_DONGLE_SPEED
;
360 next_state
= SIRDEV_STATE_DONGLE_SPEED
;
364 case SIRDEV_STATE_DONGLE_SPEED
:
365 if (dev
->dongle_drv
->reset
) {
366 ret
= dev
->dongle_drv
->set_speed(dev
, fsm
->param
);
369 next_state
= SIRDEV_STATE_ERROR
;
375 if ((delay
=ret
) == 0)
376 next_state
= SIRDEV_STATE_PORT_SPEED
;
379 case SIRDEV_STATE_PORT_SPEED
:
380 /* Finally we are ready to change the serial port speed */
381 if (dev
->drv
->set_speed
)
382 dev
->drv
->set_speed(dev
, dev
->speed
);
384 next_state
= SIRDEV_STATE_DONE
;
387 case SIRDEV_STATE_DONE
:
388 /* Signal network layer so it can send more frames */
389 netif_wake_queue(dev
->netdev
);
390 next_state
= SIRDEV_STATE_COMPLETE
;
394 IRDA_ERROR("%s - undefined state\n", __FUNCTION__
);
395 fsm
->result
= -EINVAL
;
398 case SIRDEV_STATE_ERROR
:
399 IRDA_ERROR("%s - error: %d\n", __FUNCTION__
, fsm
->result
);
401 #if 0 /* don't enable this before we have netdev->tx_timeout to recover */
402 netif_stop_queue(dev
->netdev
);
404 netif_wake_queue(dev
->netdev
);
408 case SIRDEV_STATE_COMPLETE
:
409 /* config change finished, so we are not busy any longer */
410 sirdev_enable_rx(dev
);
414 fsm
->state
= next_state
;
417 irda_queue_delayed_request(&fsm
->rq
, msecs_to_jiffies(delay
));
420 /* schedule some device configuration task for execution by kIrDAd
421 * on behalf of the above state machine.
422 * can be called from process or interrupt/tasklet context.
425 int sirdev_schedule_request(struct sir_dev
*dev
, int initial_state
, unsigned param
)
427 struct sir_fsm
*fsm
= &dev
->fsm
;
430 IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__
, initial_state
, param
);
432 if (down_trylock(&fsm
->sem
)) {
433 if (in_interrupt() || in_atomic() || irqs_disabled()) {
434 IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__
);
440 if (fsm
->state
== SIRDEV_STATE_DEAD
) {
441 /* race with sirdev_close should never happen */
442 IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__
);
444 return -ESTALE
; /* or better EPIPE? */
447 xmit_was_down
= netif_queue_stopped(dev
->netdev
);
448 netif_stop_queue(dev
->netdev
);
449 atomic_set(&dev
->enable_rx
, 0);
451 fsm
->state
= initial_state
;
455 INIT_LIST_HEAD(&fsm
->rq
.lh_request
);
457 fsm
->rq
.func
= irda_config_fsm
;
460 if (!irda_queue_request(&fsm
->rq
)) { /* returns 0 on error! */
461 atomic_set(&dev
->enable_rx
, 1);
463 netif_wake_queue(dev
->netdev
);
470 int __init
irda_thread_create(void)
472 struct completion startup
;
475 spin_lock_init(&irda_rq_queue
.lock
);
476 irda_rq_queue
.thread
= NULL
;
477 INIT_LIST_HEAD(&irda_rq_queue
.request_list
);
478 init_waitqueue_head(&irda_rq_queue
.kick
);
479 init_waitqueue_head(&irda_rq_queue
.done
);
480 atomic_set(&irda_rq_queue
.num_pending
, 0);
482 init_completion(&startup
);
483 pid
= kernel_thread(irda_thread
, &startup
, CLONE_FS
|CLONE_FILES
);
487 wait_for_completion(&startup
);
492 void __exit
irda_thread_join(void)
494 if (irda_rq_queue
.thread
) {
496 init_completion(&irda_rq_queue
.exit
);
497 irda_rq_queue
.thread
= NULL
;
498 wake_up(&irda_rq_queue
.kick
);
499 wait_for_completion(&irda_rq_queue
.exit
);