Linux-2.6.12-rc2
[linux-2.6/kvm.git] / arch / alpha / kernel / pci.c
blob1f36bbd0ed5db64e88005d79be5c08d6be384998
1 /*
2 * linux/arch/alpha/kernel/pci.c
4 * Extruded from code written by
5 * Dave Rusling (david.rusling@reo.mts.dec.com)
6 * David Mosberger (davidm@cs.arizona.edu)
7 */
9 /* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
12 * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
13 * PCI-PCI bridges cleanup
15 #include <linux/config.h>
16 #include <linux/string.h>
17 #include <linux/pci.h>
18 #include <linux/init.h>
19 #include <linux/ioport.h>
20 #include <linux/kernel.h>
21 #include <linux/bootmem.h>
22 #include <linux/module.h>
23 #include <linux/cache.h>
24 #include <linux/slab.h>
25 #include <asm/machvec.h>
27 #include "proto.h"
28 #include "pci_impl.h"
32 * Some string constants used by the various core logics.
35 const char *const pci_io_names[] = {
36 "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
37 "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
40 const char *const pci_mem_names[] = {
41 "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
42 "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
45 const char pci_hae0_name[] = "HAE0";
47 /* Indicate whether we respect the PCI setup left by console. */
49 * Make this long-lived so that we know when shutting down
50 * whether we probed only or not.
52 int pci_probe_only;
55 * The PCI controller list.
58 struct pci_controller *hose_head, **hose_tail = &hose_head;
59 struct pci_controller *pci_isa_hose;
62 * Quirks.
65 static void __init
66 quirk_isa_bridge(struct pci_dev *dev)
68 dev->class = PCI_CLASS_BRIDGE_ISA << 8;
70 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
72 static void __init
73 quirk_cypress(struct pci_dev *dev)
75 /* The Notorious Cy82C693 chip. */
77 /* The Cypress IDE controller doesn't support native mode, but it
78 has programmable addresses of IDE command/control registers.
79 This violates PCI specifications, confuses the IDE subsystem and
80 causes resource conflicts between the primary HD_CMD register and
81 the floppy controller. Ugh. Fix that. */
82 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
83 dev->resource[0].flags = 0;
84 dev->resource[1].flags = 0;
87 /* The Cypress bridge responds on the PCI bus in the address range
88 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no
89 way to turn this off. The bridge also supports several extended
90 BIOS ranges (disabled after power-up), and some consoles do turn
91 them on. So if we use a large direct-map window, or a large SG
92 window, we must avoid the entire 0xfff00000-0xffffffff region. */
93 else if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
94 if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
95 __direct_map_size = 0xfff00000UL - __direct_map_base;
96 else {
97 struct pci_controller *hose = dev->sysdata;
98 struct pci_iommu_arena *pci = hose->sg_pci;
99 if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
100 pci->size = 0xfff00000UL - pci->dma_base;
104 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
106 /* Called for each device after PCI setup is done. */
107 static void __init
108 pcibios_fixup_final(struct pci_dev *dev)
110 unsigned int class = dev->class >> 8;
112 if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
113 dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
114 isa_bridge = dev;
117 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
119 /* Just declaring that the power-of-ten prefixes are actually the
120 power-of-two ones doesn't make it true :) */
121 #define KB 1024
122 #define MB (1024*KB)
123 #define GB (1024*MB)
125 void
126 pcibios_align_resource(void *data, struct resource *res,
127 unsigned long size, unsigned long align)
129 struct pci_dev *dev = data;
130 struct pci_controller *hose = dev->sysdata;
131 unsigned long alignto;
132 unsigned long start = res->start;
134 if (res->flags & IORESOURCE_IO) {
135 /* Make sure we start at our min on all hoses */
136 if (start - hose->io_space->start < PCIBIOS_MIN_IO)
137 start = PCIBIOS_MIN_IO + hose->io_space->start;
140 * Put everything into 0x00-0xff region modulo 0x400
142 if (start & 0x300)
143 start = (start + 0x3ff) & ~0x3ff;
145 else if (res->flags & IORESOURCE_MEM) {
146 /* Make sure we start at our min on all hoses */
147 if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
148 start = PCIBIOS_MIN_MEM + hose->mem_space->start;
151 * The following holds at least for the Low Cost
152 * Alpha implementation of the PCI interface:
154 * In sparse memory address space, the first
155 * octant (16MB) of every 128MB segment is
156 * aliased to the very first 16 MB of the
157 * address space (i.e., it aliases the ISA
158 * memory address space). Thus, we try to
159 * avoid allocating PCI devices in that range.
160 * Can be allocated in 2nd-7th octant only.
161 * Devices that need more than 112MB of
162 * address space must be accessed through
163 * dense memory space only!
166 /* Align to multiple of size of minimum base. */
167 alignto = max(0x1000UL, align);
168 start = ALIGN(start, alignto);
169 if (hose->sparse_mem_base && size <= 7 * 16*MB) {
170 if (((start / (16*MB)) & 0x7) == 0) {
171 start &= ~(128*MB - 1);
172 start += 16*MB;
173 start = ALIGN(start, alignto);
175 if (start/(128*MB) != (start + size - 1)/(128*MB)) {
176 start &= ~(128*MB - 1);
177 start += (128 + 16)*MB;
178 start = ALIGN(start, alignto);
183 res->start = start;
185 #undef KB
186 #undef MB
187 #undef GB
189 static int __init
190 pcibios_init(void)
192 if (alpha_mv.init_pci)
193 alpha_mv.init_pci();
194 return 0;
197 subsys_initcall(pcibios_init);
199 char * __init
200 pcibios_setup(char *str)
202 return str;
205 #ifdef ALPHA_RESTORE_SRM_SETUP
206 static struct pdev_srm_saved_conf *srm_saved_configs;
208 void __init
209 pdev_save_srm_config(struct pci_dev *dev)
211 struct pdev_srm_saved_conf *tmp;
212 static int printed = 0;
214 if (!alpha_using_srm || pci_probe_only)
215 return;
217 if (!printed) {
218 printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
219 printed = 1;
222 tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
223 if (!tmp) {
224 printk(KERN_ERR "%s: kmalloc() failed!\n", __FUNCTION__);
225 return;
227 tmp->next = srm_saved_configs;
228 tmp->dev = dev;
230 pci_save_state(dev);
232 srm_saved_configs = tmp;
235 void
236 pci_restore_srm_config(void)
238 struct pdev_srm_saved_conf *tmp;
240 /* No need to restore if probed only. */
241 if (pci_probe_only)
242 return;
244 /* Restore SRM config. */
245 for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
246 pci_restore_state(tmp->dev);
249 #endif
251 void __init
252 pcibios_fixup_resource(struct resource *res, struct resource *root)
254 res->start += root->start;
255 res->end += root->start;
258 void __init
259 pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus)
261 /* Update device resources. */
262 struct pci_controller *hose = (struct pci_controller *)bus->sysdata;
263 int i;
265 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
266 if (!dev->resource[i].start)
267 continue;
268 if (dev->resource[i].flags & IORESOURCE_IO)
269 pcibios_fixup_resource(&dev->resource[i],
270 hose->io_space);
271 else if (dev->resource[i].flags & IORESOURCE_MEM)
272 pcibios_fixup_resource(&dev->resource[i],
273 hose->mem_space);
277 void __init
278 pcibios_fixup_bus(struct pci_bus *bus)
280 /* Propagate hose info into the subordinate devices. */
282 struct pci_controller *hose = bus->sysdata;
283 struct pci_dev *dev = bus->self;
285 if (!dev) {
286 /* Root bus. */
287 u32 pci_mem_end;
288 u32 sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
289 unsigned long end;
291 bus->resource[0] = hose->io_space;
292 bus->resource[1] = hose->mem_space;
294 /* Adjust hose mem_space limit to prevent PCI allocations
295 in the iommu windows. */
296 pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
297 end = hose->mem_space->start + pci_mem_end;
298 if (hose->mem_space->end > end)
299 hose->mem_space->end = end;
300 } else if (pci_probe_only &&
301 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
302 pci_read_bridge_bases(bus);
303 pcibios_fixup_device_resources(dev, bus);
306 list_for_each_entry(dev, &bus->devices, bus_list) {
307 pdev_save_srm_config(dev);
308 if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
309 pcibios_fixup_device_resources(dev, bus);
313 void __init
314 pcibios_update_irq(struct pci_dev *dev, int irq)
316 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
319 /* Most Alphas have straight-forward swizzling needs. */
321 u8 __init
322 common_swizzle(struct pci_dev *dev, u8 *pinp)
324 u8 pin = *pinp;
326 while (dev->bus->parent) {
327 pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
328 /* Move up the chain of bridges. */
329 dev = dev->bus->self;
331 *pinp = pin;
333 /* The slot is the slot of the last bridge. */
334 return PCI_SLOT(dev->devfn);
337 void __devinit
338 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
339 struct resource *res)
341 struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
342 unsigned long offset = 0;
344 if (res->flags & IORESOURCE_IO)
345 offset = hose->io_space->start;
346 else if (res->flags & IORESOURCE_MEM)
347 offset = hose->mem_space->start;
349 region->start = res->start - offset;
350 region->end = res->end - offset;
353 #ifdef CONFIG_HOTPLUG
354 EXPORT_SYMBOL(pcibios_resource_to_bus);
355 #endif
358 pcibios_enable_device(struct pci_dev *dev, int mask)
360 u16 cmd, oldcmd;
361 int i;
363 pci_read_config_word(dev, PCI_COMMAND, &cmd);
364 oldcmd = cmd;
366 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
367 struct resource *res = &dev->resource[i];
369 if (res->flags & IORESOURCE_IO)
370 cmd |= PCI_COMMAND_IO;
371 else if (res->flags & IORESOURCE_MEM)
372 cmd |= PCI_COMMAND_MEMORY;
375 if (cmd != oldcmd) {
376 printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
377 pci_name(dev), cmd);
378 /* Enable the appropriate bits in the PCI command register. */
379 pci_write_config_word(dev, PCI_COMMAND, cmd);
381 return 0;
385 * If we set up a device for bus mastering, we need to check the latency
386 * timer as certain firmware forgets to set it properly, as seen
387 * on SX164 and LX164 with SRM.
389 void
390 pcibios_set_master(struct pci_dev *dev)
392 u8 lat;
393 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
394 if (lat >= 16) return;
395 printk("PCI: Setting latency timer of device %s to 64\n",
396 pci_name(dev));
397 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
400 static void __init
401 pcibios_claim_one_bus(struct pci_bus *b)
403 struct pci_dev *dev;
404 struct pci_bus *child_bus;
406 list_for_each_entry(dev, &b->devices, bus_list) {
407 int i;
409 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
410 struct resource *r = &dev->resource[i];
412 if (r->parent || !r->start || !r->flags)
413 continue;
414 pci_claim_resource(dev, i);
418 list_for_each_entry(child_bus, &b->children, node)
419 pcibios_claim_one_bus(child_bus);
422 static void __init
423 pcibios_claim_console_setup(void)
425 struct pci_bus *b;
427 list_for_each_entry(b, &pci_root_buses, node)
428 pcibios_claim_one_bus(b);
431 void __init
432 common_init_pci(void)
434 struct pci_controller *hose;
435 struct pci_bus *bus;
436 int next_busno;
437 int need_domain_info = 0;
439 /* Scan all of the recorded PCI controllers. */
440 for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
441 bus = pci_scan_bus(next_busno, alpha_mv.pci_ops, hose);
442 hose->bus = bus;
443 hose->need_domain_info = need_domain_info;
444 next_busno = bus->subordinate + 1;
445 /* Don't allow 8-bit bus number overflow inside the hose -
446 reserve some space for bridges. */
447 if (next_busno > 224) {
448 next_busno = 0;
449 need_domain_info = 1;
453 if (pci_probe_only)
454 pcibios_claim_console_setup();
456 pci_assign_unassigned_resources();
457 pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
461 struct pci_controller * __init
462 alloc_pci_controller(void)
464 struct pci_controller *hose;
466 hose = alloc_bootmem(sizeof(*hose));
468 *hose_tail = hose;
469 hose_tail = &hose->next;
471 return hose;
474 struct resource * __init
475 alloc_resource(void)
477 struct resource *res;
479 res = alloc_bootmem(sizeof(*res));
481 return res;
485 /* Provide information on locations of various I/O regions in physical
486 memory. Do this on a per-card basis so that we choose the right hose. */
488 asmlinkage long
489 sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
491 struct pci_controller *hose;
492 struct pci_dev *dev;
494 /* from hose or from bus.devfn */
495 if (which & IOBASE_FROM_HOSE) {
496 for(hose = hose_head; hose; hose = hose->next)
497 if (hose->index == bus) break;
498 if (!hose) return -ENODEV;
499 } else {
500 /* Special hook for ISA access. */
501 if (bus == 0 && dfn == 0) {
502 hose = pci_isa_hose;
503 } else {
504 dev = pci_find_slot(bus, dfn);
505 if (!dev)
506 return -ENODEV;
507 hose = dev->sysdata;
511 switch (which & ~IOBASE_FROM_HOSE) {
512 case IOBASE_HOSE:
513 return hose->index;
514 case IOBASE_SPARSE_MEM:
515 return hose->sparse_mem_base;
516 case IOBASE_DENSE_MEM:
517 return hose->dense_mem_base;
518 case IOBASE_SPARSE_IO:
519 return hose->sparse_io_base;
520 case IOBASE_DENSE_IO:
521 return hose->dense_io_base;
522 case IOBASE_ROOT_BUS:
523 return hose->bus->number;
526 return -EOPNOTSUPP;
529 /* Create an __iomem token from a PCI BAR. Copied from lib/iomap.c with
530 no changes, since we don't want the other things in that object file. */
532 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
534 unsigned long start = pci_resource_start(dev, bar);
535 unsigned long len = pci_resource_len(dev, bar);
536 unsigned long flags = pci_resource_flags(dev, bar);
538 if (!len || !start)
539 return NULL;
540 if (maxlen && len > maxlen)
541 len = maxlen;
542 if (flags & IORESOURCE_IO)
543 return ioport_map(start, len);
544 if (flags & IORESOURCE_MEM) {
545 /* Not checking IORESOURCE_CACHEABLE because alpha does
546 not distinguish between ioremap and ioremap_nocache. */
547 return ioremap(start, len);
549 return NULL;
552 /* Destroy that token. Not copied from lib/iomap.c. */
554 void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
556 if (__is_mmio(addr))
557 iounmap(addr);
560 EXPORT_SYMBOL(pci_iomap);
561 EXPORT_SYMBOL(pci_iounmap);