arch/arm/mach-omap1/board-fsample.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-fsample.c
   3  *
   4  * Modified from board-perseus2.c
   5  *
   6  * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
   7  * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/delay.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/nand.h>
  20 #include <linux/mtd/partitions.h>
  21 #include <linux/input.h>
  22 #include <linux/smc91x.h>
  23
  24 #include <mach/hardware.h>
  25 #include <asm/mach-types.h>
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/flash.h>
  28 #include <asm/mach/map.h>
  29
  30 #include <plat/tc.h>
  31 #include <mach/gpio.h>
  32 #include <plat/mux.h>
  33 #include <plat/fpga.h>
  34 #include <plat/keypad.h>
  35 #include <plat/common.h>
  36 #include <plat/board.h>
  37
  38 /* fsample is pretty close to p2-sample */
  39
  40 #define fsample_cpld_read(reg) __raw_readb(reg)
  41 #define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
  42
  43 #define FSAMPLE_CPLD_BASE    0xE8100000
  44 #define FSAMPLE_CPLD_SIZE    SZ_4K
  45 #define FSAMPLE_CPLD_START   0x05080000
  46
  47 #define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
  48 #define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
  49 #define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
  50 #define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
  51 #define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
  52 #define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
  53
  54 #define FSAMPLE_CPLD_BIT_BT_RESET         0
  55 #define FSAMPLE_CPLD_BIT_LCD_RESET        1
  56 #define FSAMPLE_CPLD_BIT_CAM_PWDN         2
  57 #define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
  58 #define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
  59 #define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
  60 #define FSAMPLE_CPLD_BIT_BACKLIGHT        6
  61 #define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
  62 #define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
  63 #define FSAMPLE_CPLD_BIT_OTG_RESET        9
  64
  65 #define fsample_cpld_set(bit) \
  66     fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
  67
  68 #define fsample_cpld_clear(bit) \
  69     fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
  70
  71 static int fsample_keymap[] = {
  72         KEY(0,0,KEY_UP),
  73         KEY(0,1,KEY_RIGHT),
  74         KEY(0,2,KEY_LEFT),
  75         KEY(0,3,KEY_DOWN),
  76         KEY(0,4,KEY_ENTER),
  77         KEY(1,0,KEY_F10),
  78         KEY(1,1,KEY_SEND),
  79         KEY(1,2,KEY_END),
  80         KEY(1,3,KEY_VOLUMEDOWN),
  81         KEY(1,4,KEY_VOLUMEUP),
  82         KEY(1,5,KEY_RECORD),
  83         KEY(2,0,KEY_F9),
  84         KEY(2,1,KEY_3),
  85         KEY(2,2,KEY_6),
  86         KEY(2,3,KEY_9),
  87         KEY(2,4,KEY_KPDOT),
  88         KEY(3,0,KEY_BACK),
  89         KEY(3,1,KEY_2),
  90         KEY(3,2,KEY_5),
  91         KEY(3,3,KEY_8),
  92         KEY(3,4,KEY_0),
  93         KEY(3,5,KEY_KPSLASH),
  94         KEY(4,0,KEY_HOME),
  95         KEY(4,1,KEY_1),
  96         KEY(4,2,KEY_4),
  97         KEY(4,3,KEY_7),
  98         KEY(4,4,KEY_KPASTERISK),
  99         KEY(4,5,KEY_POWER),
 100         0
 101 };
 102
 103 static struct smc91x_platdata smc91x_info = {
 104         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 105         .leda   = RPC_LED_100_10,
 106         .ledb   = RPC_LED_TX_RX,
 107 };
 108
 109 static struct resource smc91x_resources[] = {
 110         [0] = {
 111                 .start  = H2P2_DBG_FPGA_ETHR_START,     /* Physical */
 112                 .end    = H2P2_DBG_FPGA_ETHR_START + 0xf,
 113                 .flags  = IORESOURCE_MEM,
 114         },
 115         [1] = {
 116                 .start  = INT_7XX_MPU_EXT_NIRQ,
 117                 .end    = 0,
 118                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 119         },
 120 };
 121
 122 static struct mtd_partition nor_partitions[] = {
 123         /* bootloader (U-Boot, etc) in first sector */
 124         {
 125               .name             = "bootloader",
 126               .offset           = 0,
 127               .size             = SZ_128K,
 128               .mask_flags       = MTD_WRITEABLE, /* force read-only */
 129         },
 130         /* bootloader params in the next sector */
 131         {
 132               .name             = "params",
 133               .offset           = MTDPART_OFS_APPEND,
 134               .size             = SZ_128K,
 135               .mask_flags       = 0,
 136         },
 137         /* kernel */
 138         {
 139               .name             = "kernel",
 140               .offset           = MTDPART_OFS_APPEND,
 141               .size             = SZ_2M,
 142               .mask_flags       = 0
 143         },
 144         /* rest of flash is a file system */
 145         {
 146               .name             = "rootfs",
 147               .offset           = MTDPART_OFS_APPEND,
 148               .size             = MTDPART_SIZ_FULL,
 149               .mask_flags       = 0
 150         },
 151 };
 152
 153 static struct flash_platform_data nor_data = {
 154         .map_name       = "cfi_probe",
 155         .width          = 2,
 156         .parts          = nor_partitions,
 157         .nr_parts       = ARRAY_SIZE(nor_partitions),
 158 };
 159
 160 static struct resource nor_resource = {
 161         .start          = OMAP_CS0_PHYS,
 162         .end            = OMAP_CS0_PHYS + SZ_32M - 1,
 163         .flags          = IORESOURCE_MEM,
 164 };
 165
 166 static struct platform_device nor_device = {
 167         .name           = "omapflash",
 168         .id             = 0,
 169         .dev            = {
 170                 .platform_data  = &nor_data,
 171         },
 172         .num_resources  = 1,
 173         .resource       = &nor_resource,
 174 };
 175
 176 static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 177 {
 178         struct nand_chip *this = mtd->priv;
 179         unsigned long mask;
 180
 181         if (cmd == NAND_CMD_NONE)
 182                 return;
 183
 184         mask = (ctrl & NAND_CLE) ? 0x02 : 0;
 185         if (ctrl & NAND_ALE)
 186                 mask |= 0x04;
 187         writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
 188 }
 189
 190 #define FSAMPLE_NAND_RB_GPIO_PIN        62
 191
 192 static int nand_dev_ready(struct mtd_info *mtd)
 193 {
 194         return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
 195 }
 196
 197 static const char *part_probes[] = { "cmdlinepart", NULL };
 198
 199 static struct platform_nand_data nand_data = {
 200         .chip   = {
 201                 .nr_chips               = 1,
 202                 .chip_offset            = 0,
 203                 .options                = NAND_SAMSUNG_LP_OPTIONS,
 204                 .part_probe_types       = part_probes,
 205         },
 206         .ctrl   = {
 207                 .cmd_ctrl       = nand_cmd_ctl,
 208                 .dev_ready      = nand_dev_ready,
 209         },
 210 };
 211
 212 static struct resource nand_resource = {
 213         .start          = OMAP_CS3_PHYS,
 214         .end            = OMAP_CS3_PHYS + SZ_4K - 1,
 215         .flags          = IORESOURCE_MEM,
 216 };
 217
 218 static struct platform_device nand_device = {
 219         .name           = "gen_nand",
 220         .id             = 0,
 221         .dev            = {
 222                 .platform_data  = &nand_data,
 223         },
 224         .num_resources  = 1,
 225         .resource       = &nand_resource,
 226 };
 227
 228 static struct platform_device smc91x_device = {
 229         .name           = "smc91x",
 230         .id             = 0,
 231         .dev    = {
 232                 .platform_data  = &smc91x_info,
 233         },
 234         .num_resources  = ARRAY_SIZE(smc91x_resources),
 235         .resource       = smc91x_resources,
 236 };
 237
 238 static struct resource kp_resources[] = {
 239         [0] = {
 240                 .start  = INT_7XX_MPUIO_KEYPAD,
 241                 .end    = INT_7XX_MPUIO_KEYPAD,
 242                 .flags  = IORESOURCE_IRQ,
 243         },
 244 };
 245
 246 static struct omap_kp_platform_data kp_data = {
 247         .rows           = 8,
 248         .cols           = 8,
 249         .keymap         = fsample_keymap,
 250         .keymapsize     = ARRAY_SIZE(fsample_keymap),
 251         .delay          = 4,
 252 };
 253
 254 static struct platform_device kp_device = {
 255         .name           = "omap-keypad",
 256         .id             = -1,
 257         .dev            = {
 258                 .platform_data = &kp_data,
 259         },
 260         .num_resources  = ARRAY_SIZE(kp_resources),
 261         .resource       = kp_resources,
 262 };
 263
 264 static struct platform_device lcd_device = {
 265         .name           = "lcd_p2",
 266         .id             = -1,
 267 };
 268
 269 static struct platform_device *devices[] __initdata = {
 270         &nor_device,
 271         &nand_device,
 272         &smc91x_device,
 273         &kp_device,
 274         &lcd_device,
 275 };
 276
 277 static struct omap_lcd_config fsample_lcd_config __initdata = {
 278         .ctrl_name      = "internal",
 279 };
 280
 281 static struct omap_board_config_kernel fsample_config[] = {
 282         { OMAP_TAG_LCD,         &fsample_lcd_config },
 283 };
 284
 285 static void __init omap_fsample_init(void)
 286 {
 287         if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 288                 BUG();
 289         gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
 290
 291         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 292         omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 293
 294         platform_add_devices(devices, ARRAY_SIZE(devices));
 295
 296         omap_board_config = fsample_config;
 297         omap_board_config_size = ARRAY_SIZE(fsample_config);
 298         omap_serial_init();
 299         omap_register_i2c_bus(1, 100, NULL, 0);
 300 }
 301
 302 static void __init fsample_init_smc91x(void)
 303 {
 304         fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
 305         mdelay(50);
 306         fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 307                    H2P2_DBG_FPGA_LAN_RESET);
 308         mdelay(50);
 309 }
 310
 311 static void __init omap_fsample_init_irq(void)
 312 {
 313         omap1_init_common_hw();
 314         omap_init_irq();
 315         omap_gpio_init();
 316         fsample_init_smc91x();
 317 }
 318
 319 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 320 static struct map_desc omap_fsample_io_desc[] __initdata = {
 321         {
 322                 .virtual        = H2P2_DBG_FPGA_BASE,
 323                 .pfn            = __phys_to_pfn(H2P2_DBG_FPGA_START),
 324                 .length         = H2P2_DBG_FPGA_SIZE,
 325                 .type           = MT_DEVICE
 326         },
 327         {
 328                 .virtual        = FSAMPLE_CPLD_BASE,
 329                 .pfn            = __phys_to_pfn(FSAMPLE_CPLD_START),
 330                 .length         = FSAMPLE_CPLD_SIZE,
 331                 .type           = MT_DEVICE
 332         }
 333 };
 334
 335 static void __init omap_fsample_map_io(void)
 336 {
 337         omap1_map_common_io();
 338         iotable_init(omap_fsample_io_desc,
 339                      ARRAY_SIZE(omap_fsample_io_desc));
 340
 341         /* Early, board-dependent init */
 342
 343         /*
 344          * Hold GSM Reset until needed
 345          */
 346         omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 347
 348         /*
 349          * UARTs -> done automagically by 8250 driver
 350          */
 351
 352         /*
 353          * CSx timings, GPIO Mux ... setup
 354          */
 355
 356         /* Flash: CS0 timings setup */
 357         omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
 358         omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 359
 360         /*
 361          * Ethernet support through the debug board
 362          * CS1 timings setup
 363          */
 364         omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
 365         omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 366
 367         /*
 368          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 369          * It is used as the Ethernet controller interrupt
 370          */
 371         omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 372 }
 373
 374 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 375 /* Maintainer: Brian Swetland <swetland@google.com> */
 376         .phys_io        = 0xfff00000,
 377         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 378         .boot_params    = 0x10000100,
 379         .map_io         = omap_fsample_map_io,
 380         .init_irq       = omap_fsample_init_irq,
 381         .init_machine   = omap_fsample_init,
 382         .timer          = &omap_timer,
 383 MACHINE_END