drivers/s390/scsi/zfcp_ccw.c

   1 /*
   2  * This file is part of the zfcp device driver for
   3  * FCP adapters for IBM System z9 and zSeries.
   4  *
   5  * (C) Copyright IBM Corp. 2002, 2006
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2, or (at your option)
  10  * any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include "zfcp_ext.h"
  23
  24 #define ZFCP_LOG_AREA                   ZFCP_LOG_AREA_CONFIG
  25
  26 static int zfcp_ccw_probe(struct ccw_device *);
  27 static void zfcp_ccw_remove(struct ccw_device *);
  28 static int zfcp_ccw_set_online(struct ccw_device *);
  29 static int zfcp_ccw_set_offline(struct ccw_device *);
  30 static int zfcp_ccw_notify(struct ccw_device *, int);
  31 static void zfcp_ccw_shutdown(struct ccw_device *);
  32
  33 static struct ccw_device_id zfcp_ccw_device_id[] = {
  34         {CCW_DEVICE_DEVTYPE(ZFCP_CONTROL_UNIT_TYPE,
  35                             ZFCP_CONTROL_UNIT_MODEL,
  36                             ZFCP_DEVICE_TYPE,
  37                             ZFCP_DEVICE_MODEL)},
  38         {CCW_DEVICE_DEVTYPE(ZFCP_CONTROL_UNIT_TYPE,
  39                             ZFCP_CONTROL_UNIT_MODEL,
  40                             ZFCP_DEVICE_TYPE,
  41                             ZFCP_DEVICE_MODEL_PRIV)},
  42         {},
  43 };
  44
  45 static struct ccw_driver zfcp_ccw_driver = {
  46         .owner       = THIS_MODULE,
  47         .name        = ZFCP_NAME,
  48         .ids         = zfcp_ccw_device_id,
  49         .probe       = zfcp_ccw_probe,
  50         .remove      = zfcp_ccw_remove,
  51         .set_online  = zfcp_ccw_set_online,
  52         .set_offline = zfcp_ccw_set_offline,
  53         .notify      = zfcp_ccw_notify,
  54         .shutdown    = zfcp_ccw_shutdown,
  55 };
  56
  57 MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
  58
  59 /**
  60  * zfcp_ccw_probe - probe function of zfcp driver
  61  * @ccw_device: pointer to belonging ccw device
  62  *
  63  * This function gets called by the common i/o layer and sets up the initial
  64  * data structures for each fcp adapter, which was detected by the system.
  65  * Also the sysfs files for this adapter will be created by this function.
  66  * In addition the nameserver port will be added to the ports of the adapter
  67  * and its sysfs representation will be created too.
  68  */
  69 static int
  70 zfcp_ccw_probe(struct ccw_device *ccw_device)
  71 {
  72         struct zfcp_adapter *adapter;
  73         int retval = 0;
  74
  75         down(&zfcp_data.config_sema);
  76         adapter = zfcp_adapter_enqueue(ccw_device);
  77         if (!adapter)
  78                 retval = -EINVAL;
  79         else
  80                 ZFCP_LOG_DEBUG("Probed adapter %s\n",
  81                                zfcp_get_busid_by_adapter(adapter));
  82         up(&zfcp_data.config_sema);
  83         return retval;
  84 }
  85
  86 /**
  87  * zfcp_ccw_remove - remove function of zfcp driver
  88  * @ccw_device: pointer to belonging ccw device
  89  *
  90  * This function gets called by the common i/o layer and removes an adapter
  91  * from the system. Task of this function is to get rid of all units and
  92  * ports that belong to this adapter. And in addition all resources of this
  93  * adapter will be freed too.
  94  */
  95 static void
  96 zfcp_ccw_remove(struct ccw_device *ccw_device)
  97 {
  98         struct zfcp_adapter *adapter;
  99         struct zfcp_port *port, *p;
 100         struct zfcp_unit *unit, *u;
 101
 102         ccw_device_set_offline(ccw_device);
 103         down(&zfcp_data.config_sema);
 104         adapter = dev_get_drvdata(&ccw_device->dev);
 105
 106         ZFCP_LOG_DEBUG("Removing adapter %s\n",
 107                        zfcp_get_busid_by_adapter(adapter));
 108         write_lock_irq(&zfcp_data.config_lock);
 109         list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
 110                 list_for_each_entry_safe(unit, u, &port->unit_list_head, list) {
 111                         list_move(&unit->list, &port->unit_remove_lh);
 112                         atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
 113                                         &unit->status);
 114                 }
 115                 list_move(&port->list, &adapter->port_remove_lh);
 116                 atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
 117         }
 118         atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
 119         write_unlock_irq(&zfcp_data.config_lock);
 120
 121         list_for_each_entry_safe(port, p, &adapter->port_remove_lh, list) {
 122                 list_for_each_entry_safe(unit, u, &port->unit_remove_lh, list) {
 123                         zfcp_unit_dequeue(unit);
 124                 }
 125                 zfcp_port_dequeue(port);
 126         }
 127         zfcp_adapter_wait(adapter);
 128         zfcp_adapter_dequeue(adapter);
 129
 130         up(&zfcp_data.config_sema);
 131 }
 132
 133 /**
 134  * zfcp_ccw_set_online - set_online function of zfcp driver
 135  * @ccw_device: pointer to belonging ccw device
 136  *
 137  * This function gets called by the common i/o layer and sets an adapter
 138  * into state online. Setting an fcp device online means that it will be
 139  * registered with the SCSI stack, that the QDIO queues will be set up
 140  * and that the adapter will be opened (asynchronously).
 141  */
 142 static int
 143 zfcp_ccw_set_online(struct ccw_device *ccw_device)
 144 {
 145         struct zfcp_adapter *adapter;
 146         int retval;
 147
 148         down(&zfcp_data.config_sema);
 149         adapter = dev_get_drvdata(&ccw_device->dev);
 150
 151         retval = zfcp_erp_thread_setup(adapter);
 152         if (retval) {
 153                 ZFCP_LOG_INFO("error: start of error recovery thread for "
 154                               "adapter %s failed\n",
 155                               zfcp_get_busid_by_adapter(adapter));
 156                 goto out;
 157         }
 158
 159         retval = zfcp_adapter_scsi_register(adapter);
 160         if (retval)
 161                 goto out_scsi_register;
 162
 163         /* initialize request counter */
 164         BUG_ON(!zfcp_reqlist_isempty(adapter));
 165         adapter->req_no = 0;
 166
 167         zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING,
 168                                        ZFCP_SET);
 169         zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED);
 170         zfcp_erp_wait(adapter);
 171         goto out;
 172
 173  out_scsi_register:
 174         zfcp_erp_thread_kill(adapter);
 175  out:
 176         up(&zfcp_data.config_sema);
 177         return retval;
 178 }
 179
 180 /**
 181  * zfcp_ccw_set_offline - set_offline function of zfcp driver
 182  * @ccw_device: pointer to belonging ccw device
 183  *
 184  * This function gets called by the common i/o layer and sets an adapter
 185  * into state offline.
 186  */
 187 static int
 188 zfcp_ccw_set_offline(struct ccw_device *ccw_device)
 189 {
 190         struct zfcp_adapter *adapter;
 191
 192         down(&zfcp_data.config_sema);
 193         adapter = dev_get_drvdata(&ccw_device->dev);
 194         zfcp_erp_adapter_shutdown(adapter, 0);
 195         zfcp_erp_wait(adapter);
 196         zfcp_erp_thread_kill(adapter);
 197         up(&zfcp_data.config_sema);
 198         return 0;
 199 }
 200
 201 /**
 202  * zfcp_ccw_notify
 203  * @ccw_device: pointer to belonging ccw device
 204  * @event: indicates if adapter was detached or attached
 205  *
 206  * This function gets called by the common i/o layer if an adapter has gone
 207  * or reappeared.
 208  */
 209 static int
 210 zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 211 {
 212         struct zfcp_adapter *adapter;
 213
 214         down(&zfcp_data.config_sema);
 215         adapter = dev_get_drvdata(&ccw_device->dev);
 216         switch (event) {
 217         case CIO_GONE:
 218                 ZFCP_LOG_NORMAL("adapter %s: device gone\n",
 219                                 zfcp_get_busid_by_adapter(adapter));
 220                 debug_text_event(adapter->erp_dbf,1,"dev_gone");
 221                 zfcp_erp_adapter_shutdown(adapter, 0);
 222                 break;
 223         case CIO_NO_PATH:
 224                 ZFCP_LOG_NORMAL("adapter %s: no path\n",
 225                                 zfcp_get_busid_by_adapter(adapter));
 226                 debug_text_event(adapter->erp_dbf,1,"no_path");
 227                 zfcp_erp_adapter_shutdown(adapter, 0);
 228                 break;
 229         case CIO_OPER:
 230                 ZFCP_LOG_NORMAL("adapter %s: operational again\n",
 231                                 zfcp_get_busid_by_adapter(adapter));
 232                 debug_text_event(adapter->erp_dbf,1,"dev_oper");
 233                 zfcp_erp_modify_adapter_status(adapter,
 234                                                ZFCP_STATUS_COMMON_RUNNING,
 235                                                ZFCP_SET);
 236                 zfcp_erp_adapter_reopen(adapter,
 237                                         ZFCP_STATUS_COMMON_ERP_FAILED);
 238                 break;
 239         }
 240         zfcp_erp_wait(adapter);
 241         up(&zfcp_data.config_sema);
 242         return 1;
 243 }
 244
 245 /**
 246  * zfcp_ccw_register - ccw register function
 247  *
 248  * Registers the driver at the common i/o layer. This function will be called
 249  * at module load time/system start.
 250  */
 251 int __init
 252 zfcp_ccw_register(void)
 253 {
 254         int retval;
 255
 256         retval = ccw_driver_register(&zfcp_ccw_driver);
 257         if (retval)
 258                 goto out;
 259         retval = zfcp_sysfs_driver_create_files(&zfcp_ccw_driver.driver);
 260         if (retval)
 261                 ccw_driver_unregister(&zfcp_ccw_driver);
 262  out:
 263         return retval;
 264 }
 265
 266 /**
 267  * zfcp_ccw_shutdown - gets called on reboot/shutdown
 268  *
 269  * Makes sure that QDIO queues are down when the system gets stopped.
 270  */
 271 static void
 272 zfcp_ccw_shutdown(struct ccw_device *cdev)
 273 {
 274         struct zfcp_adapter *adapter;
 275
 276         down(&zfcp_data.config_sema);
 277         adapter = dev_get_drvdata(&cdev->dev);
 278         zfcp_erp_adapter_shutdown(adapter, 0);
 279         zfcp_erp_wait(adapter);
 280         up(&zfcp_data.config_sema);
 281 }
 282
 283 #undef ZFCP_LOG_AREA