1 #ifndef _IEEE1394_HOSTS_H
2 #define _IEEE1394_HOSTS_H
4 #include <linux/device.h>
5 #include <linux/wait.h>
6 #include <linux/list.h>
7 #include <linux/timer.h>
8 #include <linux/skbuff.h>
10 #include <asm/semaphore.h>
12 #include "ieee1394_types.h"
20 struct list_head host_list
;
26 struct sk_buff_head pending_packet_queue
;
28 struct timer_list timeout
;
29 unsigned long timeout_interval
;
31 unsigned char iso_listen_count
[64];
33 int node_count
; /* number of identified nodes on this bus */
34 int selfid_count
; /* total number of SelfIDs received */
35 int nodes_active
; /* number of nodes with active link layer */
36 u8 speed
[ALL_NODES
]; /* speed between each node and local node */
38 nodeid_t node_id
; /* node ID of this host */
39 nodeid_t irm_id
; /* ID of this bus' isochronous resource manager */
40 nodeid_t busmgr_id
; /* ID of this bus' bus manager */
42 /* this nodes state */
43 unsigned in_bus_reset
:1;
44 unsigned is_shutdown
:1;
45 unsigned resume_packet_sent
:1;
47 /* this nodes' duties on the bus */
54 quadlet_t
*topology_map
;
56 struct csr_control csr
;
58 /* Per node tlabel pool allocation */
59 struct hpsb_tlabel_pool tpool
[ALL_NODES
];
61 struct hpsb_host_driver
*driver
;
68 struct class_device class_dev
;
70 int update_config_rom
;
71 struct work_struct delayed_reset
;
73 unsigned int config_roms
;
75 struct list_head addr_space
;
76 u64 low_addr_space
; /* upper bound of physical DMA area */
77 u64 middle_addr_space
; /* upper bound of posted write area */
83 /* Host is requested to reset its bus and cancel all outstanding async
84 * requests. If arg == 1, it shall also attempt to become root on the
85 * bus. Return void. */
88 /* Arg is void, return value is the hardware cycle counter value. */
91 /* Set the hardware cycle counter to the value in arg, return void.
92 * FIXME - setting is probably not required. */
95 /* Configure hardware for new bus ID in arg, return void. */
98 /* If arg true, start sending cycle start packets, stop if arg == 0.
102 /* Cancel all outstanding async requests without resetting the bus.
106 /* Start or stop receiving isochronous channel in arg. Return void.
107 * This acts as an optimization hint, hosts are not required not to
108 * listen on unrequested channels. */
114 /* rawiso API - see iso.h for the meanings of these commands
115 (they correspond exactly to the hpsb_iso_* API functions)
116 * INIT = allocate resources
117 * START = begin transmission/reception
118 * STOP = halt transmission/reception
119 * QUEUE/RELEASE = produce/consume packets
120 * SHUTDOWN = deallocate resources
130 RECV_LISTEN_CHANNEL
, /* multi-channel only */
131 RECV_UNLISTEN_CHANNEL
, /* multi-channel only */
132 RECV_SET_CHANNEL_MASK
, /* multi-channel only; arg is a *u64 */
141 /* 166 microsecond reset -- only type of reset available on
142 non-1394a capable controllers */
145 /* Short (arbitrated) reset -- only available on 1394a capable
149 /* Variants that set force_root before issueing the bus reset */
150 LONG_RESET_FORCE_ROOT
, SHORT_RESET_FORCE_ROOT
,
152 /* Variants that clear force_root before issueing the bus reset */
153 LONG_RESET_NO_FORCE_ROOT
, SHORT_RESET_NO_FORCE_ROOT
156 struct hpsb_host_driver
{
157 struct module
*owner
;
160 /* The hardware driver may optionally support a function that is used
161 * to set the hardware ConfigROM if the hardware supports handling
162 * reads to the ConfigROM on its own. */
163 void (*set_hw_config_rom
) (struct hpsb_host
*host
, quadlet_t
*config_rom
);
165 /* This function shall implement packet transmission based on
166 * packet->type. It shall CRC both parts of the packet (unless
167 * packet->type == raw) and do byte-swapping as necessary or instruct
168 * the hardware to do so. It can return immediately after the packet
169 * was queued for sending. After sending, hpsb_sent_packet() has to be
170 * called. Return 0 on success, negative errno on failure.
171 * NOTE: The function must be callable in interrupt context.
173 int (*transmit_packet
) (struct hpsb_host
*host
,
174 struct hpsb_packet
*packet
);
176 /* This function requests miscellanous services from the driver, see
177 * above for command codes and expected actions. Return -1 for unknown
178 * command, though that should never happen.
180 int (*devctl
) (struct hpsb_host
*host
, enum devctl_cmd command
, int arg
);
182 /* ISO transmission/reception functions. Return 0 on success, -1
183 * (or -EXXX errno code) on failure. If the low-level driver does not
184 * support the new ISO API, set isoctl to NULL.
186 int (*isoctl
) (struct hpsb_iso
*iso
, enum isoctl_cmd command
, unsigned long arg
);
188 /* This function is mainly to redirect local CSR reads/locks to the iso
189 * management registers (bus manager id, bandwidth available, channels
190 * available) to the hardware registers in OHCI. reg is 0,1,2,3 for bus
191 * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids
192 * as OHCI uses). data and compare are the new data and expected data
193 * respectively, return value is the old value.
195 quadlet_t (*hw_csr_reg
) (struct hpsb_host
*host
, int reg
,
196 quadlet_t data
, quadlet_t compare
);
200 struct hpsb_host
*hpsb_alloc_host(struct hpsb_host_driver
*drv
, size_t extra
,
202 int hpsb_add_host(struct hpsb_host
*host
);
203 void hpsb_remove_host(struct hpsb_host
*h
);
205 /* The following 2 functions are deprecated and will be removed when the
206 * raw1394/libraw1394 update is complete. */
207 int hpsb_update_config_rom(struct hpsb_host
*host
,
208 const quadlet_t
*new_rom
, size_t size
, unsigned char rom_version
);
209 int hpsb_get_config_rom(struct hpsb_host
*host
, quadlet_t
*buffer
,
210 size_t buffersize
, size_t *rom_size
, unsigned char *rom_version
);
212 /* Updates the configuration rom image of a host. rom_version must be the
213 * current version, otherwise it will fail with return value -1. If this
214 * host does not support config-rom-update, it will return -EINVAL.
215 * Return value 0 indicates success.
217 int hpsb_update_config_rom_image(struct hpsb_host
*host
);
219 #endif /* _IEEE1394_HOSTS_H */