2 * dv1394.c - DV input/output over IEEE 1394 on OHCI chips
3 * Copyright (C)2001 Daniel Maas <dmaas@dcine.com>
4 * receive by Dan Dennedy <dan@dennedy.org>
7 * video1394.c - video driver for OHCI 1394 boards
8 * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
28 I designed dv1394 as a "pipe" that you can use to shoot DV onto a
29 FireWire bus. In transmission mode, dv1394 does the following:
31 1. accepts contiguous frames of DV data from user-space, via write()
32 or mmap() (see dv1394.h for the complete API)
33 2. wraps IEC 61883 packets around the DV data, inserting
34 empty synchronization packets as necessary
35 3. assigns accurate SYT timestamps to the outgoing packets
36 4. shoots them out using the OHCI card's IT DMA engine
38 Thanks to Dan Dennedy, we now have a receive mode that does the following:
40 1. accepts raw IEC 61883 packets from the OHCI card
41 2. re-assembles the DV data payloads into contiguous frames,
42 discarding empty packets
43 3. sends the DV data to user-space via read() or mmap()
49 - tunable frame-drop behavior: either loop last frame, or halt transmission
51 - use a scatter/gather buffer for DMA programs (f->descriptor_pool)
52 so that we don't rely on allocating 64KB of contiguous kernel memory
53 via pci_alloc_consistent()
56 - during reception, better handling of dropped frames and continuity errors
57 - during reception, prevent DMA from bypassing the irq tasklets
58 - reduce irq rate during reception (1/250 packets).
59 - add many more internal buffers during reception with scatter/gather dma.
60 - add dbc (continuity) checking on receive, increment status.dropped_frames
62 - restart IT DMA after a bus reset
63 - safely obtain and release ISO Tx channels in cooperation with OHCI driver
64 - map received DIF blocks to their proper location in DV frame (ensure
65 recovery if dropped packet)
66 - handle bus resets gracefully (OHCI card seems to take care of this itself(!))
67 - do not allow resizing the user_buf once allocated; eliminate nuke_buffer_mappings
68 - eliminated #ifdef DV1394_DEBUG_LEVEL by inventing macros debug_printk and irq_printk
69 - added wmb() and mb() to places where PCI read/write ordering needs to be enforced
70 - set video->id correctly
71 - store video_cards in an array indexed by OHCI card ID, rather than a list
72 - implement DMA context allocation to cooperate with other users of the OHCI
73 - fix all XXX showstoppers
74 - disable IR/IT DMA interrupts on shutdown
75 - flush pci writes to the card by issuing a read
76 - character device dispatching
77 - switch over to the new kernel DMA API (pci_map_*()) (* needs testing on platforms with IOMMU!)
78 - keep all video_cards in a list (for open() via chardev), set file->private_data = video
79 - dv1394_poll should indicate POLLIN when receiving buffers are available
80 - add proc fs interface to set cip_n, cip_d, syt_offset, and video signal
81 - expose xmit and recv as separate devices (not exclusive)
82 - expose NTSC and PAL as separate devices (can be overridden)
86 #include <linux/kernel.h>
87 #include <linux/list.h>
88 #include <linux/slab.h>
89 #include <linux/interrupt.h>
90 #include <linux/wait.h>
91 #include <linux/errno.h>
92 #include <linux/module.h>
93 #include <linux/init.h>
94 #include <linux/pci.h>
96 #include <linux/poll.h>
97 #include <linux/smp_lock.h>
98 #include <linux/bitops.h>
99 #include <asm/byteorder.h>
100 #include <asm/atomic.h>
102 #include <asm/uaccess.h>
103 #include <linux/delay.h>
104 #include <asm/pgtable.h>
105 #include <asm/page.h>
106 #include <linux/sched.h>
107 #include <linux/types.h>
108 #include <linux/vmalloc.h>
109 #include <linux/string.h>
110 #include <linux/compat.h>
111 #include <linux/cdev.h>
113 #include "ieee1394.h"
114 #include "ieee1394_types.h"
117 #include "ieee1394_core.h"
118 #include "highlevel.h"
120 #include "dv1394-private.h"
122 #include "ohci1394.h"
125 0 - no debugging messages
126 1 - some debugging messages, but none during DMA frame transmission
127 2 - lots of messages, including during DMA frame transmission
128 (will cause undeflows if your machine is too slow!)
131 #define DV1394_DEBUG_LEVEL 0
133 /* for debugging use ONLY: allow more than one open() of the device */
134 /* #define DV1394_ALLOW_MORE_THAN_ONE_OPEN 1 */
136 #if DV1394_DEBUG_LEVEL >= 2
137 #define irq_printk( args... ) printk( args )
139 #define irq_printk( args... )
142 #if DV1394_DEBUG_LEVEL >= 1
143 #define debug_printk( args... ) printk( args)
145 #define debug_printk( args... )
148 /* issue a dummy PCI read to force the preceding write
149 to be posted to the PCI bus immediately */
151 static inline void flush_pci_write(struct ti_ohci
*ohci
)
154 reg_read(ohci
, OHCI1394_IsochronousCycleTimer
);
157 static void it_tasklet_func(unsigned long data
);
158 static void ir_tasklet_func(unsigned long data
);
161 static long dv1394_compat_ioctl(struct file
*file
, unsigned int cmd
,
167 /* list of all video_cards */
168 static LIST_HEAD(dv1394_cards
);
169 static DEFINE_SPINLOCK(dv1394_cards_lock
);
171 /* translate from a struct file* to the corresponding struct video_card* */
173 static inline struct video_card
* file_to_video_card(struct file
*file
)
175 return (struct video_card
*) file
->private_data
;
178 /*** FRAME METHODS *********************************************************/
180 static void frame_reset(struct frame
*f
)
182 f
->state
= FRAME_CLEAR
;
185 f
->frame_begin_timestamp
= NULL
;
186 f
->assigned_timestamp
= 0;
189 f
->mid_frame_timestamp
= NULL
;
190 f
->frame_end_timestamp
= NULL
;
191 f
->frame_end_branch
= NULL
;
194 static struct frame
* frame_new(unsigned int frame_num
, struct video_card
*video
)
196 struct frame
*f
= kmalloc(sizeof(*f
), GFP_KERNEL
);
201 f
->frame_num
= frame_num
;
203 f
->header_pool
= pci_alloc_consistent(f
->video
->ohci
->dev
, PAGE_SIZE
, &f
->header_pool_dma
);
204 if (!f
->header_pool
) {
205 printk(KERN_ERR
"dv1394: failed to allocate CIP header pool\n");
210 debug_printk("dv1394: frame_new: allocated CIP header pool at virt 0x%08lx (contig) dma 0x%08lx size %ld\n",
211 (unsigned long) f
->header_pool
, (unsigned long) f
->header_pool_dma
, PAGE_SIZE
);
213 f
->descriptor_pool_size
= MAX_PACKETS
* sizeof(struct DMA_descriptor_block
);
214 /* make it an even # of pages */
215 f
->descriptor_pool_size
+= PAGE_SIZE
- (f
->descriptor_pool_size
%PAGE_SIZE
);
217 f
->descriptor_pool
= pci_alloc_consistent(f
->video
->ohci
->dev
,
218 f
->descriptor_pool_size
,
219 &f
->descriptor_pool_dma
);
220 if (!f
->descriptor_pool
) {
221 pci_free_consistent(f
->video
->ohci
->dev
, PAGE_SIZE
, f
->header_pool
, f
->header_pool_dma
);
226 debug_printk("dv1394: frame_new: allocated DMA program memory at virt 0x%08lx (contig) dma 0x%08lx size %ld\n",
227 (unsigned long) f
->descriptor_pool
, (unsigned long) f
->descriptor_pool_dma
, f
->descriptor_pool_size
);
235 static void frame_delete(struct frame
*f
)
237 pci_free_consistent(f
->video
->ohci
->dev
, PAGE_SIZE
, f
->header_pool
, f
->header_pool_dma
);
238 pci_free_consistent(f
->video
->ohci
->dev
, f
->descriptor_pool_size
, f
->descriptor_pool
, f
->descriptor_pool_dma
);
246 frame_prepare() - build the DMA program for transmitting
248 Frame_prepare() must be called OUTSIDE the video->spinlock.
249 However, frame_prepare() must still be serialized, so
250 it should be called WITH the video->sem taken.
253 static void frame_prepare(struct video_card
*video
, unsigned int this_frame
)
255 struct frame
*f
= video
->frames
[this_frame
];
258 struct DMA_descriptor_block
*block
;
259 dma_addr_t block_dma
;
260 struct CIP_header
*cip
;
263 unsigned int n_descriptors
, full_packets
, packets_per_frame
, payload_size
;
265 /* these flags denote packets that need special attention */
266 int empty_packet
, first_packet
, last_packet
, mid_packet
;
268 u32
*branch_address
, *last_branch_address
= NULL
;
269 unsigned long data_p
;
270 int first_packet_empty
= 0;
271 u32 cycleTimer
, ct_sec
, ct_cyc
, ct_off
;
272 unsigned long irq_flags
;
274 irq_printk("frame_prepare( %d ) ---------------------\n", this_frame
);
280 if (video
->pal_or_ntsc
== DV1394_PAL
)
281 packets_per_frame
= DV1394_PAL_PACKETS_PER_FRAME
;
283 packets_per_frame
= DV1394_NTSC_PACKETS_PER_FRAME
;
285 while ( full_packets
< packets_per_frame
) {
286 empty_packet
= first_packet
= last_packet
= mid_packet
= 0;
288 data_p
= f
->data
+ full_packets
* 480;
290 /************************************************/
291 /* allocate a descriptor block and a CIP header */
292 /************************************************/
294 /* note: these should NOT cross a page boundary (DMA restriction) */
296 if (f
->n_packets
>= MAX_PACKETS
) {
297 printk(KERN_ERR
"dv1394: FATAL ERROR: max packet count exceeded\n");
301 /* the block surely won't cross a page boundary,
302 since an even number of descriptor_blocks fit on a page */
303 block
= &(f
->descriptor_pool
[f
->n_packets
]);
305 /* DMA address of the block = offset of block relative
306 to the kernel base address of the descriptor pool
307 + DMA base address of the descriptor pool */
308 block_dma
= ((unsigned long) block
- (unsigned long) f
->descriptor_pool
) + f
->descriptor_pool_dma
;
311 /* the whole CIP pool fits on one page, so no worries about boundaries */
312 if ( ((unsigned long) &(f
->header_pool
[f
->n_packets
]) - (unsigned long) f
->header_pool
)
314 printk(KERN_ERR
"dv1394: FATAL ERROR: no room to allocate CIP header\n");
318 cip
= &(f
->header_pool
[f
->n_packets
]);
320 /* DMA address of the CIP header = offset of cip
321 relative to kernel base address of the header pool
322 + DMA base address of the header pool */
323 cip_dma
= (unsigned long) cip
% PAGE_SIZE
+ f
->header_pool_dma
;
325 /* is this an empty packet? */
327 if (video
->cip_accum
> (video
->cip_d
- video
->cip_n
)) {
330 video
->cip_accum
-= (video
->cip_d
- video
->cip_n
);
333 video
->cip_accum
+= video
->cip_n
;
336 /* there are three important packets each frame:
338 the first packet in the frame - we ask the card to record the timestamp when
339 this packet is actually sent, so we can monitor
340 how accurate our timestamps are. Also, the first
341 packet serves as a semaphore to let us know that
342 it's OK to free the *previous* frame's DMA buffer
344 the last packet in the frame - this packet is used to detect buffer underflows.
345 if this is the last ready frame, the last DMA block
346 will have a branch back to the beginning of the frame
347 (so that the card will re-send the frame on underflow).
348 if this branch gets taken, we know that at least one
349 frame has been dropped. When the next frame is ready,
350 the branch is pointed to its first packet, and the
351 semaphore is disabled.
353 a "mid" packet slightly before the end of the frame - this packet should trigger
354 an interrupt so we can go and assign a timestamp to the first packet
355 in the next frame. We don't use the very last packet in the frame
356 for this purpose, because that would leave very little time to set
357 the timestamp before DMA starts on the next frame.
360 if (f
->n_packets
== 0) {
362 } else if ( full_packets
== (packets_per_frame
-1) ) {
364 } else if (f
->n_packets
== packets_per_frame
) {
369 /********************/
370 /* setup CIP header */
371 /********************/
373 /* the timestamp will be written later from the
374 mid-frame interrupt handler. For now we just
375 store the address of the CIP header(s) that
378 /* first packet in the frame needs a timestamp */
382 first_packet_empty
= 1;
384 } else if (first_packet_empty
&& (f
->n_packets
== 1) ) {
385 /* if the first packet was empty, the second
386 packet's CIP header also needs a timestamp */
391 /* the node ID number of the OHCI card */
392 reg_read(video
->ohci
, OHCI1394_NodeID
) & 0x3F,
393 video
->continuity_counter
,
395 0xFFFF /* the timestamp is filled in later */);
397 /* advance counter, only for full packets */
398 if ( ! empty_packet
)
399 video
->continuity_counter
++;
401 /******************************/
402 /* setup DMA descriptor block */
403 /******************************/
405 /* first descriptor - OUTPUT_MORE_IMMEDIATE, for the controller's IT header */
406 fill_output_more_immediate( &(block
->u
.out
.omi
), 1, video
->channel
, 0, payload_size
);
409 /* second descriptor - OUTPUT_LAST for CIP header */
410 fill_output_last( &(block
->u
.out
.u
.empty
.ol
),
412 /* want completion status on all interesting packets */
413 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
415 /* want interrupts on all interesting packets */
416 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
418 sizeof(struct CIP_header
), /* data size */
422 f
->frame_begin_timestamp
= &(block
->u
.out
.u
.empty
.ol
.q
[3]);
424 f
->mid_frame_timestamp
= &(block
->u
.out
.u
.empty
.ol
.q
[3]);
425 else if (last_packet
) {
426 f
->frame_end_timestamp
= &(block
->u
.out
.u
.empty
.ol
.q
[3]);
427 f
->frame_end_branch
= &(block
->u
.out
.u
.empty
.ol
.q
[2]);
430 branch_address
= &(block
->u
.out
.u
.empty
.ol
.q
[2]);
433 f
->first_n_descriptors
= n_descriptors
;
435 } else { /* full packet */
437 /* second descriptor - OUTPUT_MORE for CIP header */
438 fill_output_more( &(block
->u
.out
.u
.full
.om
),
439 sizeof(struct CIP_header
), /* data size */
443 /* third (and possibly fourth) descriptor - for DV data */
444 /* the 480-byte payload can cross a page boundary; if so,
445 we need to split it into two DMA descriptors */
447 /* does the 480-byte data payload cross a page boundary? */
448 if ( (PAGE_SIZE
- ((unsigned long)data_p
% PAGE_SIZE
) ) < 480 ) {
450 /* page boundary crossed */
452 fill_output_more( &(block
->u
.out
.u
.full
.u
.cross
.om
),
453 /* data size - how much of data_p fits on the first page */
454 PAGE_SIZE
- (data_p
% PAGE_SIZE
),
456 /* DMA address of data_p */
457 dma_region_offset_to_bus(&video
->dv_buf
,
458 data_p
- (unsigned long) video
->dv_buf
.kvirt
));
460 fill_output_last( &(block
->u
.out
.u
.full
.u
.cross
.ol
),
462 /* want completion status on all interesting packets */
463 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
465 /* want interrupt on all interesting packets */
466 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
468 /* data size - remaining portion of data_p */
469 480 - (PAGE_SIZE
- (data_p
% PAGE_SIZE
)),
471 /* DMA address of data_p + PAGE_SIZE - (data_p % PAGE_SIZE) */
472 dma_region_offset_to_bus(&video
->dv_buf
,
473 data_p
+ PAGE_SIZE
- (data_p
% PAGE_SIZE
) - (unsigned long) video
->dv_buf
.kvirt
));
476 f
->frame_begin_timestamp
= &(block
->u
.out
.u
.full
.u
.cross
.ol
.q
[3]);
478 f
->mid_frame_timestamp
= &(block
->u
.out
.u
.full
.u
.cross
.ol
.q
[3]);
479 else if (last_packet
) {
480 f
->frame_end_timestamp
= &(block
->u
.out
.u
.full
.u
.cross
.ol
.q
[3]);
481 f
->frame_end_branch
= &(block
->u
.out
.u
.full
.u
.cross
.ol
.q
[2]);
484 branch_address
= &(block
->u
.out
.u
.full
.u
.cross
.ol
.q
[2]);
488 f
->first_n_descriptors
= n_descriptors
;
493 /* fits on one page */
495 fill_output_last( &(block
->u
.out
.u
.full
.u
.nocross
.ol
),
497 /* want completion status on all interesting packets */
498 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
500 /* want interrupt on all interesting packets */
501 (first_packet
|| mid_packet
|| last_packet
) ? 1 : 0,
503 480, /* data size (480 bytes of DV data) */
506 /* DMA address of data_p */
507 dma_region_offset_to_bus(&video
->dv_buf
,
508 data_p
- (unsigned long) video
->dv_buf
.kvirt
));
511 f
->frame_begin_timestamp
= &(block
->u
.out
.u
.full
.u
.nocross
.ol
.q
[3]);
513 f
->mid_frame_timestamp
= &(block
->u
.out
.u
.full
.u
.nocross
.ol
.q
[3]);
514 else if (last_packet
) {
515 f
->frame_end_timestamp
= &(block
->u
.out
.u
.full
.u
.nocross
.ol
.q
[3]);
516 f
->frame_end_branch
= &(block
->u
.out
.u
.full
.u
.nocross
.ol
.q
[2]);
519 branch_address
= &(block
->u
.out
.u
.full
.u
.nocross
.ol
.q
[2]);
523 f
->first_n_descriptors
= n_descriptors
;
529 /* link this descriptor block into the DMA program by filling in
530 the branch address of the previous block */
532 /* note: we are not linked into the active DMA chain yet */
534 if (last_branch_address
) {
535 *(last_branch_address
) = cpu_to_le32(block_dma
| n_descriptors
);
538 last_branch_address
= branch_address
;
545 /* when we first assemble a new frame, set the final branch
546 to loop back up to the top */
547 *(f
->frame_end_branch
) = cpu_to_le32(f
->descriptor_pool_dma
| f
->first_n_descriptors
);
549 /* make the latest version of this frame visible to the PCI card */
550 dma_region_sync_for_device(&video
->dv_buf
, f
->data
- (unsigned long) video
->dv_buf
.kvirt
, video
->frame_size
);
552 /* lock against DMA interrupt */
553 spin_lock_irqsave(&video
->spinlock
, irq_flags
);
555 f
->state
= FRAME_READY
;
557 video
->n_clear_frames
--;
559 last_frame
= video
->first_clear_frame
- 1;
560 if (last_frame
== -1)
561 last_frame
= video
->n_frames
-1;
563 video
->first_clear_frame
= (video
->first_clear_frame
+ 1) % video
->n_frames
;
565 irq_printk(" frame %d prepared, active_frame = %d, n_clear_frames = %d, first_clear_frame = %d\n last=%d\n",
566 this_frame
, video
->active_frame
, video
->n_clear_frames
, video
->first_clear_frame
, last_frame
);
568 irq_printk(" begin_ts %08lx mid_ts %08lx end_ts %08lx end_br %08lx\n",
569 (unsigned long) f
->frame_begin_timestamp
,
570 (unsigned long) f
->mid_frame_timestamp
,
571 (unsigned long) f
->frame_end_timestamp
,
572 (unsigned long) f
->frame_end_branch
);
574 if (video
->active_frame
!= -1) {
576 /* if DMA is already active, we are almost done */
577 /* just link us onto the active DMA chain */
578 if (video
->frames
[last_frame
]->frame_end_branch
) {
581 /* point the previous frame's tail to this frame's head */
582 *(video
->frames
[last_frame
]->frame_end_branch
) = cpu_to_le32(f
->descriptor_pool_dma
| f
->first_n_descriptors
);
584 /* this write MUST precede the next one, or we could silently drop frames */
587 /* disable the want_status semaphore on the last packet */
588 temp
= le32_to_cpu(*(video
->frames
[last_frame
]->frame_end_branch
- 2));
590 *(video
->frames
[last_frame
]->frame_end_branch
- 2) = cpu_to_le32(temp
);
592 /* flush these writes to memory ASAP */
593 flush_pci_write(video
->ohci
);
596 ideally the writes should be "atomic": if
597 the OHCI card reads the want_status flag in
598 between them, we'll falsely report a
599 dropped frame. Hopefully this window is too
600 small to really matter, and the consequence
601 is rather harmless. */
604 irq_printk(" new frame %d linked onto DMA chain\n", this_frame
);
607 printk(KERN_ERR
"dv1394: last frame not ready???\n");
612 u32 transmit_sec
, transmit_cyc
;
615 /* DMA is stopped, so this is the very first frame */
616 video
->active_frame
= this_frame
;
618 /* set CommandPtr to address and size of first descriptor block */
619 reg_write(video
->ohci
, video
->ohci_IsoXmitCommandPtr
,
620 video
->frames
[video
->active_frame
]->descriptor_pool_dma
|
621 f
->first_n_descriptors
);
623 /* assign a timestamp based on the current cycle time...
624 We'll tell the card to begin DMA 100 cycles from now,
625 and assign a timestamp 103 cycles from now */
627 cycleTimer
= reg_read(video
->ohci
, OHCI1394_IsochronousCycleTimer
);
629 ct_sec
= cycleTimer
>> 25;
630 ct_cyc
= (cycleTimer
>> 12) & 0x1FFF;
631 ct_off
= cycleTimer
& 0xFFF;
633 transmit_sec
= ct_sec
;
634 transmit_cyc
= ct_cyc
+ 100;
636 transmit_sec
+= transmit_cyc
/8000;
637 transmit_cyc
%= 8000;
640 ts_cyc
= transmit_cyc
+ 3;
643 f
->assigned_timestamp
= (ts_cyc
&0xF) << 12;
645 /* now actually write the timestamp into the appropriate CIP headers */
647 f
->cip_syt1
->b
[6] = f
->assigned_timestamp
>> 8;
648 f
->cip_syt1
->b
[7] = f
->assigned_timestamp
& 0xFF;
651 f
->cip_syt2
->b
[6] = f
->assigned_timestamp
>> 8;
652 f
->cip_syt2
->b
[7] = f
->assigned_timestamp
& 0xFF;
655 /* --- start DMA --- */
657 /* clear all bits in ContextControl register */
659 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlClear
, 0xFFFFFFFF);
662 /* the OHCI card has the ability to start ISO transmission on a
663 particular cycle (start-on-cycle). This way we can ensure that
664 the first DV frame will have an accurate timestamp.
666 However, start-on-cycle only appears to work if the OHCI card
667 is cycle master! Since the consequences of messing up the first
668 timestamp are minimal*, just disable start-on-cycle for now.
670 * my DV deck drops the first few frames before it "locks in;"
671 so the first frame having an incorrect timestamp is inconsequential.
675 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlSet
,
676 (1 << 31) /* enable start-on-cycle */
677 | ( (transmit_sec
& 0x3) << 29)
678 | (transmit_cyc
<< 16));
682 video
->dma_running
= 1;
684 /* set the 'run' bit */
685 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlSet
, 0x8000);
686 flush_pci_write(video
->ohci
);
688 /* --- DMA should be running now --- */
690 debug_printk(" Cycle = %4u ContextControl = %08x CmdPtr = %08x\n",
691 (reg_read(video
->ohci
, OHCI1394_IsochronousCycleTimer
) >> 12) & 0x1FFF,
692 reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
),
693 reg_read(video
->ohci
, video
->ohci_IsoXmitCommandPtr
));
695 debug_printk(" DMA start - current cycle %4u, transmit cycle %4u (%2u), assigning ts cycle %2u\n",
696 ct_cyc
, transmit_cyc
, transmit_cyc
& 0xF, ts_cyc
& 0xF);
698 #if DV1394_DEBUG_LEVEL >= 2
700 /* check if DMA is really running */
705 if (reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
) & (1 << 10)) {
706 printk("DMA ACTIVE after %d msec\n", i
);
712 printk("set = %08x, cmdPtr = %08x\n",
713 reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
),
714 reg_read(video
->ohci
, video
->ohci_IsoXmitCommandPtr
)
717 if ( ! (reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
) & (1 << 10)) ) {
718 printk("DMA did NOT go active after 20ms, event = %x\n",
719 reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
) & 0x1F);
721 printk("DMA is RUNNING!\n");
728 spin_unlock_irqrestore(&video
->spinlock
, irq_flags
);
733 /*** RECEIVE FUNCTIONS *****************************************************/
736 frame method put_packet
738 map and copy the packet data to its location in the frame
739 based upon DIF section and sequence
743 frame_put_packet (struct frame
*f
, struct packet
*p
)
745 int section_type
= p
->data
[0] >> 5; /* section type is in bits 5 - 7 */
746 int dif_sequence
= p
->data
[1] >> 4; /* dif sequence number is in bits 4 - 7 */
747 int dif_block
= p
->data
[2];
750 if (dif_sequence
> 11 || dif_block
> 149) return;
752 switch (section_type
) {
753 case 0: /* 1 Header block */
754 memcpy( (void *) f
->data
+ dif_sequence
* 150 * 80, p
->data
, 480);
757 case 1: /* 2 Subcode blocks */
758 memcpy( (void *) f
->data
+ dif_sequence
* 150 * 80 + (1 + dif_block
) * 80, p
->data
, 480);
761 case 2: /* 3 VAUX blocks */
762 memcpy( (void *) f
->data
+ dif_sequence
* 150 * 80 + (3 + dif_block
) * 80, p
->data
, 480);
765 case 3: /* 9 Audio blocks interleaved with video */
766 memcpy( (void *) f
->data
+ dif_sequence
* 150 * 80 + (6 + dif_block
* 16) * 80, p
->data
, 480);
769 case 4: /* 135 Video blocks interleaved with audio */
770 memcpy( (void *) f
->data
+ dif_sequence
* 150 * 80 + (7 + (dif_block
/ 15) + dif_block
) * 80, p
->data
, 480);
773 default: /* we can not handle any other data */
779 static void start_dma_receive(struct video_card
*video
)
781 if (video
->first_run
== 1) {
782 video
->first_run
= 0;
784 /* start DMA once all of the frames are READY */
785 video
->n_clear_frames
= 0;
786 video
->first_clear_frame
= -1;
787 video
->current_packet
= 0;
788 video
->active_frame
= 0;
790 /* reset iso recv control register */
791 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlClear
, 0xFFFFFFFF);
794 /* clear bufferFill, set isochHeader and speed (0=100) */
795 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, 0x40000000);
797 /* match on all tags, listen on channel */
798 reg_write(video
->ohci
, video
->ohci_IsoRcvContextMatch
, 0xf0000000 | video
->channel
);
800 /* address and first descriptor block + Z=1 */
801 reg_write(video
->ohci
, video
->ohci_IsoRcvCommandPtr
,
802 video
->frames
[0]->descriptor_pool_dma
| 1); /* Z=1 */
805 video
->dma_running
= 1;
808 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, 0x8000);
809 flush_pci_write(video
->ohci
);
811 debug_printk("dv1394: DMA started\n");
813 #if DV1394_DEBUG_LEVEL >= 2
817 for (i
= 0; i
< 1000; ++i
) {
819 if (reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & (1 << 10)) {
820 printk("DMA ACTIVE after %d msec\n", i
);
824 if ( reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & (1 << 11) ) {
825 printk("DEAD, event = %x\n",
826 reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & 0x1F);
828 printk("RUNNING!\n");
831 } else if ( reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & (1 << 11) ) {
832 debug_printk("DEAD, event = %x\n",
833 reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & 0x1F);
836 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, (1 << 12));
842 receive_packets() - build the DMA program for receiving
845 static void receive_packets(struct video_card
*video
)
847 struct DMA_descriptor_block
*block
= NULL
;
848 dma_addr_t block_dma
= 0;
849 struct packet
*data
= NULL
;
850 dma_addr_t data_dma
= 0;
851 u32
*last_branch_address
= NULL
;
852 unsigned long irq_flags
;
853 int want_interrupt
= 0;
854 struct frame
*f
= NULL
;
857 spin_lock_irqsave(&video
->spinlock
, irq_flags
);
859 for (j
= 0; j
< video
->n_frames
; j
++) {
862 if (j
> 0 && f
!= NULL
&& f
->frame_end_branch
!= NULL
)
863 *(f
->frame_end_branch
) = cpu_to_le32(video
->frames
[j
]->descriptor_pool_dma
| 1); /* set Z=1 */
865 f
= video
->frames
[j
];
867 for (i
= 0; i
< MAX_PACKETS
; i
++) {
868 /* locate a descriptor block and packet from the buffer */
869 block
= &(f
->descriptor_pool
[i
]);
870 block_dma
= ((unsigned long) block
- (unsigned long) f
->descriptor_pool
) + f
->descriptor_pool_dma
;
872 data
= ((struct packet
*)video
->packet_buf
.kvirt
) + f
->frame_num
* MAX_PACKETS
+ i
;
873 data_dma
= dma_region_offset_to_bus( &video
->packet_buf
,
874 ((unsigned long) data
- (unsigned long) video
->packet_buf
.kvirt
) );
876 /* setup DMA descriptor block */
877 want_interrupt
= ((i
% (MAX_PACKETS
/2)) == 0 || i
== (MAX_PACKETS
-1));
878 fill_input_last( &(block
->u
.in
.il
), want_interrupt
, 512, data_dma
);
880 /* link descriptors */
881 last_branch_address
= f
->frame_end_branch
;
883 if (last_branch_address
!= NULL
)
884 *(last_branch_address
) = cpu_to_le32(block_dma
| 1); /* set Z=1 */
886 f
->frame_end_branch
= &(block
->u
.in
.il
.q
[2]);
891 spin_unlock_irqrestore(&video
->spinlock
, irq_flags
);
897 /*** MANAGEMENT FUNCTIONS **************************************************/
899 static int do_dv1394_init(struct video_card
*video
, struct dv1394_init
*init
)
901 unsigned long flags
, new_buf_size
;
904 int retval
= -EINVAL
;
906 debug_printk("dv1394: initialising %d\n", video
->id
);
907 if (init
->api_version
!= DV1394_API_VERSION
)
910 /* first sanitize all the parameters */
911 if ( (init
->n_frames
< 2) || (init
->n_frames
> DV1394_MAX_FRAMES
) )
914 if ( (init
->format
!= DV1394_NTSC
) && (init
->format
!= DV1394_PAL
) )
917 if ( (init
->syt_offset
== 0) || (init
->syt_offset
> 50) )
918 /* default SYT offset is 3 cycles */
919 init
->syt_offset
= 3;
921 if ( (init
->channel
> 63) || (init
->channel
< 0) )
924 chan_mask
= (u64
)1 << init
->channel
;
926 /* calculate what size DMA buffer is needed */
927 if (init
->format
== DV1394_NTSC
)
928 new_buf_size
= DV1394_NTSC_FRAME_SIZE
* init
->n_frames
;
930 new_buf_size
= DV1394_PAL_FRAME_SIZE
* init
->n_frames
;
932 /* round up to PAGE_SIZE */
933 if (new_buf_size
% PAGE_SIZE
) new_buf_size
+= PAGE_SIZE
- (new_buf_size
% PAGE_SIZE
);
935 /* don't allow the user to allocate the DMA buffer more than once */
936 if (video
->dv_buf
.kvirt
&& video
->dv_buf_size
!= new_buf_size
) {
937 printk("dv1394: re-sizing the DMA buffer is not allowed\n");
941 /* shutdown the card if it's currently active */
942 /* (the card should not be reset if the parameters are screwy) */
944 do_dv1394_shutdown(video
, 0);
946 /* try to claim the ISO channel */
947 spin_lock_irqsave(&video
->ohci
->IR_channel_lock
, flags
);
948 if (video
->ohci
->ISO_channel_usage
& chan_mask
) {
949 spin_unlock_irqrestore(&video
->ohci
->IR_channel_lock
, flags
);
953 video
->ohci
->ISO_channel_usage
|= chan_mask
;
954 spin_unlock_irqrestore(&video
->ohci
->IR_channel_lock
, flags
);
956 video
->channel
= init
->channel
;
958 /* initialize misc. fields of video */
959 video
->n_frames
= init
->n_frames
;
960 video
->pal_or_ntsc
= init
->format
;
962 video
->cip_accum
= 0;
963 video
->continuity_counter
= 0;
965 video
->active_frame
= -1;
966 video
->first_clear_frame
= 0;
967 video
->n_clear_frames
= video
->n_frames
;
968 video
->dropped_frames
= 0;
970 video
->write_off
= 0;
972 video
->first_run
= 1;
973 video
->current_packet
= -1;
974 video
->first_frame
= 0;
976 if (video
->pal_or_ntsc
== DV1394_NTSC
) {
977 video
->cip_n
= init
->cip_n
!= 0 ? init
->cip_n
: CIP_N_NTSC
;
978 video
->cip_d
= init
->cip_d
!= 0 ? init
->cip_d
: CIP_D_NTSC
;
979 video
->frame_size
= DV1394_NTSC_FRAME_SIZE
;
981 video
->cip_n
= init
->cip_n
!= 0 ? init
->cip_n
: CIP_N_PAL
;
982 video
->cip_d
= init
->cip_d
!= 0 ? init
->cip_d
: CIP_D_PAL
;
983 video
->frame_size
= DV1394_PAL_FRAME_SIZE
;
986 video
->syt_offset
= init
->syt_offset
;
988 /* find and claim DMA contexts on the OHCI card */
990 if (video
->ohci_it_ctx
== -1) {
991 ohci1394_init_iso_tasklet(&video
->it_tasklet
, OHCI_ISO_TRANSMIT
,
992 it_tasklet_func
, (unsigned long) video
);
994 if (ohci1394_register_iso_tasklet(video
->ohci
, &video
->it_tasklet
) < 0) {
995 printk(KERN_ERR
"dv1394: could not find an available IT DMA context\n");
1000 video
->ohci_it_ctx
= video
->it_tasklet
.context
;
1001 debug_printk("dv1394: claimed IT DMA context %d\n", video
->ohci_it_ctx
);
1004 if (video
->ohci_ir_ctx
== -1) {
1005 ohci1394_init_iso_tasklet(&video
->ir_tasklet
, OHCI_ISO_RECEIVE
,
1006 ir_tasklet_func
, (unsigned long) video
);
1008 if (ohci1394_register_iso_tasklet(video
->ohci
, &video
->ir_tasklet
) < 0) {
1009 printk(KERN_ERR
"dv1394: could not find an available IR DMA context\n");
1013 video
->ohci_ir_ctx
= video
->ir_tasklet
.context
;
1014 debug_printk("dv1394: claimed IR DMA context %d\n", video
->ohci_ir_ctx
);
1017 /* allocate struct frames */
1018 for (i
= 0; i
< init
->n_frames
; i
++) {
1019 video
->frames
[i
] = frame_new(i
, video
);
1021 if (!video
->frames
[i
]) {
1022 printk(KERN_ERR
"dv1394: Cannot allocate frame structs\n");
1028 if (!video
->dv_buf
.kvirt
) {
1029 /* allocate the ringbuffer */
1030 retval
= dma_region_alloc(&video
->dv_buf
, new_buf_size
, video
->ohci
->dev
, PCI_DMA_TODEVICE
);
1034 video
->dv_buf_size
= new_buf_size
;
1036 debug_printk("dv1394: Allocated %d frame buffers, total %u pages (%u DMA pages), %lu bytes\n",
1037 video
->n_frames
, video
->dv_buf
.n_pages
,
1038 video
->dv_buf
.n_dma_pages
, video
->dv_buf_size
);
1041 /* set up the frame->data pointers */
1042 for (i
= 0; i
< video
->n_frames
; i
++)
1043 video
->frames
[i
]->data
= (unsigned long) video
->dv_buf
.kvirt
+ i
* video
->frame_size
;
1045 if (!video
->packet_buf
.kvirt
) {
1046 /* allocate packet buffer */
1047 video
->packet_buf_size
= sizeof(struct packet
) * video
->n_frames
* MAX_PACKETS
;
1048 if (video
->packet_buf_size
% PAGE_SIZE
)
1049 video
->packet_buf_size
+= PAGE_SIZE
- (video
->packet_buf_size
% PAGE_SIZE
);
1051 retval
= dma_region_alloc(&video
->packet_buf
, video
->packet_buf_size
,
1052 video
->ohci
->dev
, PCI_DMA_FROMDEVICE
);
1056 debug_printk("dv1394: Allocated %d packets in buffer, total %u pages (%u DMA pages), %lu bytes\n",
1057 video
->n_frames
*MAX_PACKETS
, video
->packet_buf
.n_pages
,
1058 video
->packet_buf
.n_dma_pages
, video
->packet_buf_size
);
1061 /* set up register offsets for IT context */
1062 /* IT DMA context registers are spaced 16 bytes apart */
1063 video
->ohci_IsoXmitContextControlSet
= OHCI1394_IsoXmitContextControlSet
+16*video
->ohci_it_ctx
;
1064 video
->ohci_IsoXmitContextControlClear
= OHCI1394_IsoXmitContextControlClear
+16*video
->ohci_it_ctx
;
1065 video
->ohci_IsoXmitCommandPtr
= OHCI1394_IsoXmitCommandPtr
+16*video
->ohci_it_ctx
;
1067 /* enable interrupts for IT context */
1068 reg_write(video
->ohci
, OHCI1394_IsoXmitIntMaskSet
, (1 << video
->ohci_it_ctx
));
1069 debug_printk("dv1394: interrupts enabled for IT context %d\n", video
->ohci_it_ctx
);
1071 /* set up register offsets for IR context */
1072 /* IR DMA context registers are spaced 32 bytes apart */
1073 video
->ohci_IsoRcvContextControlSet
= OHCI1394_IsoRcvContextControlSet
+32*video
->ohci_ir_ctx
;
1074 video
->ohci_IsoRcvContextControlClear
= OHCI1394_IsoRcvContextControlClear
+32*video
->ohci_ir_ctx
;
1075 video
->ohci_IsoRcvCommandPtr
= OHCI1394_IsoRcvCommandPtr
+32*video
->ohci_ir_ctx
;
1076 video
->ohci_IsoRcvContextMatch
= OHCI1394_IsoRcvContextMatch
+32*video
->ohci_ir_ctx
;
1078 /* enable interrupts for IR context */
1079 reg_write(video
->ohci
, OHCI1394_IsoRecvIntMaskSet
, (1 << video
->ohci_ir_ctx
) );
1080 debug_printk("dv1394: interrupts enabled for IR context %d\n", video
->ohci_ir_ctx
);
1085 do_dv1394_shutdown(video
, 1);
1089 /* if the user doesn't bother to call ioctl(INIT) before starting
1090 mmap() or read()/write(), just give him some default values */
1092 static int do_dv1394_init_default(struct video_card
*video
)
1094 struct dv1394_init init
;
1096 init
.api_version
= DV1394_API_VERSION
;
1097 init
.n_frames
= DV1394_MAX_FRAMES
/ 4;
1098 init
.channel
= video
->channel
;
1099 init
.format
= video
->pal_or_ntsc
;
1100 init
.cip_n
= video
->cip_n
;
1101 init
.cip_d
= video
->cip_d
;
1102 init
.syt_offset
= video
->syt_offset
;
1104 return do_dv1394_init(video
, &init
);
1107 /* do NOT call from interrupt context */
1108 static void stop_dma(struct video_card
*video
)
1110 unsigned long flags
;
1114 spin_lock_irqsave(&video
->spinlock
, flags
);
1116 video
->dma_running
= 0;
1118 if ( (video
->ohci_it_ctx
== -1) && (video
->ohci_ir_ctx
== -1) )
1121 /* stop DMA if in progress */
1122 if ( (video
->active_frame
!= -1) ||
1123 (reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlClear
) & (1 << 10)) ||
1124 (reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlClear
) & (1 << 10)) ) {
1126 /* clear the .run bits */
1127 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlClear
, (1 << 15));
1128 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlClear
, (1 << 15));
1129 flush_pci_write(video
->ohci
);
1131 video
->active_frame
= -1;
1132 video
->first_run
= 1;
1134 /* wait until DMA really stops */
1138 /* wait 0.1 millisecond */
1141 if ( (reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlClear
) & (1 << 10)) ||
1142 (reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlClear
) & (1 << 10)) ) {
1144 debug_printk("dv1394: stop_dma: DMA not stopped yet\n" );
1147 debug_printk("dv1394: stop_dma: DMA stopped safely after %d ms\n", i
/10);
1155 printk(KERN_ERR
"dv1394: stop_dma: DMA still going after %d ms!\n", i
/10);
1159 debug_printk("dv1394: stop_dma: already stopped.\n");
1162 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1167 static void do_dv1394_shutdown(struct video_card
*video
, int free_dv_buf
)
1171 debug_printk("dv1394: shutdown...\n");
1173 /* stop DMA if in progress */
1176 /* release the DMA contexts */
1177 if (video
->ohci_it_ctx
!= -1) {
1178 video
->ohci_IsoXmitContextControlSet
= 0;
1179 video
->ohci_IsoXmitContextControlClear
= 0;
1180 video
->ohci_IsoXmitCommandPtr
= 0;
1182 /* disable interrupts for IT context */
1183 reg_write(video
->ohci
, OHCI1394_IsoXmitIntMaskClear
, (1 << video
->ohci_it_ctx
));
1185 /* remove tasklet */
1186 ohci1394_unregister_iso_tasklet(video
->ohci
, &video
->it_tasklet
);
1187 debug_printk("dv1394: IT context %d released\n", video
->ohci_it_ctx
);
1188 video
->ohci_it_ctx
= -1;
1191 if (video
->ohci_ir_ctx
!= -1) {
1192 video
->ohci_IsoRcvContextControlSet
= 0;
1193 video
->ohci_IsoRcvContextControlClear
= 0;
1194 video
->ohci_IsoRcvCommandPtr
= 0;
1195 video
->ohci_IsoRcvContextMatch
= 0;
1197 /* disable interrupts for IR context */
1198 reg_write(video
->ohci
, OHCI1394_IsoRecvIntMaskClear
, (1 << video
->ohci_ir_ctx
));
1200 /* remove tasklet */
1201 ohci1394_unregister_iso_tasklet(video
->ohci
, &video
->ir_tasklet
);
1202 debug_printk("dv1394: IR context %d released\n", video
->ohci_ir_ctx
);
1203 video
->ohci_ir_ctx
= -1;
1206 /* release the ISO channel */
1207 if (video
->channel
!= -1) {
1209 unsigned long flags
;
1211 chan_mask
= (u64
)1 << video
->channel
;
1213 spin_lock_irqsave(&video
->ohci
->IR_channel_lock
, flags
);
1214 video
->ohci
->ISO_channel_usage
&= ~(chan_mask
);
1215 spin_unlock_irqrestore(&video
->ohci
->IR_channel_lock
, flags
);
1217 video
->channel
= -1;
1220 /* free the frame structs */
1221 for (i
= 0; i
< DV1394_MAX_FRAMES
; i
++) {
1222 if (video
->frames
[i
])
1223 frame_delete(video
->frames
[i
]);
1224 video
->frames
[i
] = NULL
;
1227 video
->n_frames
= 0;
1229 /* we can't free the DMA buffer unless it is guaranteed that
1230 no more user-space mappings exist */
1233 dma_region_free(&video
->dv_buf
);
1234 video
->dv_buf_size
= 0;
1237 /* free packet buffer */
1238 dma_region_free(&video
->packet_buf
);
1239 video
->packet_buf_size
= 0;
1241 debug_printk("dv1394: shutdown OK\n");
1245 **********************************
1246 *** MMAP() THEORY OF OPERATION ***
1247 **********************************
1249 The ringbuffer cannot be re-allocated or freed while
1250 a user program maintains a mapping of it. (note that a mapping
1251 can persist even after the device fd is closed!)
1253 So, only let the user process allocate the DMA buffer once.
1254 To resize or deallocate it, you must close the device file
1257 Previously Dan M. hacked out a scheme that allowed the DMA
1258 buffer to change by forcefully unmapping it from the user's
1259 address space. It was prone to error because it's very hard to
1260 track all the places the buffer could have been mapped (we
1261 would have had to walk the vma list of every process in the
1262 system to be sure we found all the mappings!). Instead, we
1263 force the user to choose one buffer size and stick with
1264 it. This small sacrifice is worth the huge reduction in
1265 error-prone code in dv1394.
1268 static int dv1394_mmap(struct file
*file
, struct vm_area_struct
*vma
)
1270 struct video_card
*video
= file_to_video_card(file
);
1271 int retval
= -EINVAL
;
1273 /* serialize mmap */
1276 if ( ! video_card_initialized(video
) ) {
1277 retval
= do_dv1394_init_default(video
);
1282 retval
= dma_region_mmap(&video
->dv_buf
, file
, vma
);
1288 /*** DEVICE FILE INTERFACE *************************************************/
1290 /* no need to serialize, multiple threads OK */
1291 static unsigned int dv1394_poll(struct file
*file
, struct poll_table_struct
*wait
)
1293 struct video_card
*video
= file_to_video_card(file
);
1294 unsigned int mask
= 0;
1295 unsigned long flags
;
1297 poll_wait(file
, &video
->waitq
, wait
);
1299 spin_lock_irqsave(&video
->spinlock
, flags
);
1300 if ( video
->n_frames
== 0 ) {
1302 } else if ( video
->active_frame
== -1 ) {
1303 /* nothing going on */
1306 /* any clear/ready buffers? */
1307 if (video
->n_clear_frames
>0)
1308 mask
|= POLLOUT
| POLLIN
;
1310 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1315 static int dv1394_fasync(int fd
, struct file
*file
, int on
)
1317 /* I just copied this code verbatim from Alan Cox's mouse driver example
1318 (Documentation/DocBook/) */
1320 struct video_card
*video
= file_to_video_card(file
);
1322 int retval
= fasync_helper(fd
, file
, on
, &video
->fasync
);
1329 static ssize_t
dv1394_write(struct file
*file
, const char __user
*buffer
, size_t count
, loff_t
*ppos
)
1331 struct video_card
*video
= file_to_video_card(file
);
1332 DECLARE_WAITQUEUE(wait
, current
);
1335 unsigned long flags
;
1338 /* serialize this to prevent multi-threaded mayhem */
1339 if (file
->f_flags
& O_NONBLOCK
) {
1340 if (down_trylock(&video
->sem
))
1343 if (down_interruptible(&video
->sem
))
1344 return -ERESTARTSYS
;
1347 if ( !video_card_initialized(video
) ) {
1348 ret
= do_dv1394_init_default(video
);
1356 add_wait_queue(&video
->waitq
, &wait
);
1360 /* must set TASK_INTERRUPTIBLE *before* checking for free
1361 buffers; otherwise we could miss a wakeup if the interrupt
1362 fires between the check and the schedule() */
1364 set_current_state(TASK_INTERRUPTIBLE
);
1366 spin_lock_irqsave(&video
->spinlock
, flags
);
1368 target_frame
= video
->first_clear_frame
;
1370 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1372 if (video
->frames
[target_frame
]->state
== FRAME_CLEAR
) {
1374 /* how much room is left in the target frame buffer */
1375 cnt
= video
->frame_size
- (video
->write_off
- target_frame
* video
->frame_size
);
1378 /* buffer is already used */
1386 /* no room left, gotta wait */
1387 if (file
->f_flags
& O_NONBLOCK
) {
1392 if (signal_pending(current
)) {
1400 continue; /* start over from 'while(count > 0)...' */
1403 if (copy_from_user(video
->dv_buf
.kvirt
+ video
->write_off
, buffer
, cnt
)) {
1409 video
->write_off
= (video
->write_off
+ cnt
) % (video
->n_frames
* video
->frame_size
);
1415 if (video
->write_off
== video
->frame_size
* ((target_frame
+ 1) % video
->n_frames
))
1416 frame_prepare(video
, target_frame
);
1419 remove_wait_queue(&video
->waitq
, &wait
);
1420 set_current_state(TASK_RUNNING
);
1426 static ssize_t
dv1394_read(struct file
*file
, char __user
*buffer
, size_t count
, loff_t
*ppos
)
1428 struct video_card
*video
= file_to_video_card(file
);
1429 DECLARE_WAITQUEUE(wait
, current
);
1432 unsigned long flags
;
1435 /* serialize this to prevent multi-threaded mayhem */
1436 if (file
->f_flags
& O_NONBLOCK
) {
1437 if (down_trylock(&video
->sem
))
1440 if (down_interruptible(&video
->sem
))
1441 return -ERESTARTSYS
;
1444 if ( !video_card_initialized(video
) ) {
1445 ret
= do_dv1394_init_default(video
);
1450 video
->continuity_counter
= -1;
1452 receive_packets(video
);
1454 start_dma_receive(video
);
1458 add_wait_queue(&video
->waitq
, &wait
);
1462 /* must set TASK_INTERRUPTIBLE *before* checking for free
1463 buffers; otherwise we could miss a wakeup if the interrupt
1464 fires between the check and the schedule() */
1466 set_current_state(TASK_INTERRUPTIBLE
);
1468 spin_lock_irqsave(&video
->spinlock
, flags
);
1470 target_frame
= video
->first_clear_frame
;
1472 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1474 if (target_frame
>= 0 &&
1475 video
->n_clear_frames
> 0 &&
1476 video
->frames
[target_frame
]->state
== FRAME_CLEAR
) {
1478 /* how much room is left in the target frame buffer */
1479 cnt
= video
->frame_size
- (video
->write_off
- target_frame
* video
->frame_size
);
1482 /* buffer is already used */
1490 /* no room left, gotta wait */
1491 if (file
->f_flags
& O_NONBLOCK
) {
1496 if (signal_pending(current
)) {
1504 continue; /* start over from 'while(count > 0)...' */
1507 if (copy_to_user(buffer
, video
->dv_buf
.kvirt
+ video
->write_off
, cnt
)) {
1513 video
->write_off
= (video
->write_off
+ cnt
) % (video
->n_frames
* video
->frame_size
);
1519 if (video
->write_off
== video
->frame_size
* ((target_frame
+ 1) % video
->n_frames
)) {
1520 spin_lock_irqsave(&video
->spinlock
, flags
);
1521 video
->n_clear_frames
--;
1522 video
->first_clear_frame
= (video
->first_clear_frame
+ 1) % video
->n_frames
;
1523 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1527 remove_wait_queue(&video
->waitq
, &wait
);
1528 set_current_state(TASK_RUNNING
);
1534 /*** DEVICE IOCTL INTERFACE ************************************************/
1536 static long dv1394_ioctl(struct file
*file
, unsigned int cmd
, unsigned long arg
)
1538 struct video_card
*video
;
1539 unsigned long flags
;
1541 void __user
*argp
= (void __user
*)arg
;
1543 DECLARE_WAITQUEUE(wait
, current
);
1546 video
= file_to_video_card(file
);
1548 /* serialize this to prevent multi-threaded mayhem */
1549 if (file
->f_flags
& O_NONBLOCK
) {
1550 if (down_trylock(&video
->sem
)) {
1555 if (down_interruptible(&video
->sem
)) {
1557 return -ERESTARTSYS
;
1563 case DV1394_IOC_SUBMIT_FRAMES
: {
1564 unsigned int n_submit
;
1566 if ( !video_card_initialized(video
) ) {
1567 ret
= do_dv1394_init_default(video
);
1572 n_submit
= (unsigned int) arg
;
1574 if (n_submit
> video
->n_frames
) {
1579 while (n_submit
> 0) {
1581 add_wait_queue(&video
->waitq
, &wait
);
1582 set_current_state(TASK_INTERRUPTIBLE
);
1584 spin_lock_irqsave(&video
->spinlock
, flags
);
1586 /* wait until video->first_clear_frame is really CLEAR */
1587 while (video
->frames
[video
->first_clear_frame
]->state
!= FRAME_CLEAR
) {
1589 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1591 if (signal_pending(current
)) {
1592 remove_wait_queue(&video
->waitq
, &wait
);
1593 set_current_state(TASK_RUNNING
);
1599 set_current_state(TASK_INTERRUPTIBLE
);
1601 spin_lock_irqsave(&video
->spinlock
, flags
);
1603 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1605 remove_wait_queue(&video
->waitq
, &wait
);
1606 set_current_state(TASK_RUNNING
);
1608 frame_prepare(video
, video
->first_clear_frame
);
1617 case DV1394_IOC_WAIT_FRAMES
: {
1618 unsigned int n_wait
;
1620 if ( !video_card_initialized(video
) ) {
1625 n_wait
= (unsigned int) arg
;
1627 /* since we re-run the last frame on underflow, we will
1628 never actually have n_frames clear frames; at most only
1631 if (n_wait
> (video
->n_frames
-1) ) {
1636 add_wait_queue(&video
->waitq
, &wait
);
1637 set_current_state(TASK_INTERRUPTIBLE
);
1639 spin_lock_irqsave(&video
->spinlock
, flags
);
1641 while (video
->n_clear_frames
< n_wait
) {
1643 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1645 if (signal_pending(current
)) {
1646 remove_wait_queue(&video
->waitq
, &wait
);
1647 set_current_state(TASK_RUNNING
);
1653 set_current_state(TASK_INTERRUPTIBLE
);
1655 spin_lock_irqsave(&video
->spinlock
, flags
);
1658 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1660 remove_wait_queue(&video
->waitq
, &wait
);
1661 set_current_state(TASK_RUNNING
);
1666 case DV1394_IOC_RECEIVE_FRAMES
: {
1667 unsigned int n_recv
;
1669 if ( !video_card_initialized(video
) ) {
1674 n_recv
= (unsigned int) arg
;
1676 /* at least one frame must be active */
1677 if (n_recv
> (video
->n_frames
-1) ) {
1682 spin_lock_irqsave(&video
->spinlock
, flags
);
1684 /* release the clear frames */
1685 video
->n_clear_frames
-= n_recv
;
1687 /* advance the clear frame cursor */
1688 video
->first_clear_frame
= (video
->first_clear_frame
+ n_recv
) % video
->n_frames
;
1690 /* reset dropped_frames */
1691 video
->dropped_frames
= 0;
1693 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1699 case DV1394_IOC_START_RECEIVE
: {
1700 if ( !video_card_initialized(video
) ) {
1701 ret
= do_dv1394_init_default(video
);
1706 video
->continuity_counter
= -1;
1708 receive_packets(video
);
1710 start_dma_receive(video
);
1716 case DV1394_IOC_INIT
: {
1717 struct dv1394_init init
;
1719 ret
= do_dv1394_init_default(video
);
1721 if (copy_from_user(&init
, argp
, sizeof(init
))) {
1725 ret
= do_dv1394_init(video
, &init
);
1730 case DV1394_IOC_SHUTDOWN
:
1731 do_dv1394_shutdown(video
, 0);
1736 case DV1394_IOC_GET_STATUS
: {
1737 struct dv1394_status status
;
1739 if ( !video_card_initialized(video
) ) {
1744 status
.init
.api_version
= DV1394_API_VERSION
;
1745 status
.init
.channel
= video
->channel
;
1746 status
.init
.n_frames
= video
->n_frames
;
1747 status
.init
.format
= video
->pal_or_ntsc
;
1748 status
.init
.cip_n
= video
->cip_n
;
1749 status
.init
.cip_d
= video
->cip_d
;
1750 status
.init
.syt_offset
= video
->syt_offset
;
1752 status
.first_clear_frame
= video
->first_clear_frame
;
1754 /* the rest of the fields need to be locked against the interrupt */
1755 spin_lock_irqsave(&video
->spinlock
, flags
);
1757 status
.active_frame
= video
->active_frame
;
1758 status
.n_clear_frames
= video
->n_clear_frames
;
1760 status
.dropped_frames
= video
->dropped_frames
;
1762 /* reset dropped_frames */
1763 video
->dropped_frames
= 0;
1765 spin_unlock_irqrestore(&video
->spinlock
, flags
);
1767 if (copy_to_user(argp
, &status
, sizeof(status
))) {
1786 /*** DEVICE FILE INTERFACE CONTINUED ***************************************/
1788 static int dv1394_open(struct inode
*inode
, struct file
*file
)
1790 struct video_card
*video
= NULL
;
1792 if (file
->private_data
) {
1793 video
= (struct video_card
*) file
->private_data
;
1796 /* look up the card by ID */
1797 unsigned long flags
;
1799 spin_lock_irqsave(&dv1394_cards_lock
, flags
);
1800 if (!list_empty(&dv1394_cards
)) {
1801 struct video_card
*p
;
1802 list_for_each_entry(p
, &dv1394_cards
, list
) {
1803 if ((p
->id
) == ieee1394_file_to_instance(file
)) {
1809 spin_unlock_irqrestore(&dv1394_cards_lock
, flags
);
1812 debug_printk("dv1394: OHCI card %d not found", ieee1394_file_to_instance(file
));
1816 file
->private_data
= (void*) video
;
1819 #ifndef DV1394_ALLOW_MORE_THAN_ONE_OPEN
1821 if ( test_and_set_bit(0, &video
->open
) ) {
1822 /* video is already open by someone else */
1832 static int dv1394_release(struct inode
*inode
, struct file
*file
)
1834 struct video_card
*video
= file_to_video_card(file
);
1836 /* OK to free the DMA buffer, no more mappings can exist */
1837 do_dv1394_shutdown(video
, 1);
1839 /* clean up async I/O users */
1840 dv1394_fasync(-1, file
, 0);
1842 /* give someone else a turn */
1843 clear_bit(0, &video
->open
);
1849 /*** DEVICE DRIVER HANDLERS ************************************************/
1851 static void it_tasklet_func(unsigned long data
)
1854 struct video_card
*video
= (struct video_card
*) data
;
1856 spin_lock(&video
->spinlock
);
1858 if (!video
->dma_running
)
1861 irq_printk("ContextControl = %08x, CommandPtr = %08x\n",
1862 reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
),
1863 reg_read(video
->ohci
, video
->ohci_IsoXmitCommandPtr
)
1867 if ( (video
->ohci_it_ctx
!= -1) &&
1868 (reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
) & (1 << 10)) ) {
1871 unsigned int frame
, i
;
1874 if (video
->active_frame
== -1)
1877 frame
= video
->active_frame
;
1879 /* check all the DMA-able frames */
1880 for (i
= 0; i
< video
->n_frames
; i
++, frame
= (frame
+1) % video
->n_frames
) {
1882 irq_printk("IRQ checking frame %d...", frame
);
1883 f
= video
->frames
[frame
];
1884 if (f
->state
!= FRAME_READY
) {
1885 irq_printk("clear, skipping\n");
1886 /* we don't own this frame */
1890 irq_printk("DMA\n");
1892 /* check the frame begin semaphore to see if we can free the previous frame */
1893 if ( *(f
->frame_begin_timestamp
) ) {
1895 struct frame
*prev_f
;
1899 /* don't reset, need this later *(f->frame_begin_timestamp) = 0; */
1900 irq_printk(" BEGIN\n");
1902 prev_frame
= frame
- 1;
1903 if (prev_frame
== -1)
1904 prev_frame
+= video
->n_frames
;
1905 prev_f
= video
->frames
[prev_frame
];
1907 /* make sure we can actually garbage collect
1909 if ( (prev_f
->state
== FRAME_READY
) &&
1910 prev_f
->done
&& (!f
->done
) )
1912 frame_reset(prev_f
);
1913 video
->n_clear_frames
++;
1915 video
->active_frame
= frame
;
1917 irq_printk(" BEGIN - freeing previous frame %d, new active frame is %d\n", prev_frame
, frame
);
1919 irq_printk(" BEGIN - can't free yet\n");
1926 /* see if we need to set the timestamp for the next frame */
1927 if ( *(f
->mid_frame_timestamp
) ) {
1928 struct frame
*next_frame
;
1929 u32 begin_ts
, ts_cyc
, ts_off
;
1931 *(f
->mid_frame_timestamp
) = 0;
1933 begin_ts
= le32_to_cpu(*(f
->frame_begin_timestamp
));
1935 irq_printk(" MIDDLE - first packet was sent at cycle %4u (%2u), assigned timestamp was (%2u) %4u\n",
1936 begin_ts
& 0x1FFF, begin_ts
& 0xF,
1937 f
->assigned_timestamp
>> 12, f
->assigned_timestamp
& 0xFFF);
1939 /* prepare next frame and assign timestamp */
1940 next_frame
= video
->frames
[ (frame
+1) % video
->n_frames
];
1942 if (next_frame
->state
== FRAME_READY
) {
1943 irq_printk(" MIDDLE - next frame is ready, good\n");
1945 debug_printk("dv1394: Underflow! At least one frame has been dropped.\n");
1949 /* set the timestamp to the timestamp of the last frame sent,
1950 plus the length of the last frame sent, plus the syt latency */
1951 ts_cyc
= begin_ts
& 0xF;
1952 /* advance one frame, plus syt latency (typically 2-3) */
1953 ts_cyc
+= f
->n_packets
+ video
->syt_offset
;
1957 ts_cyc
+= ts_off
/3072;
1960 next_frame
->assigned_timestamp
= ((ts_cyc
&0xF) << 12) + ts_off
;
1961 if (next_frame
->cip_syt1
) {
1962 next_frame
->cip_syt1
->b
[6] = next_frame
->assigned_timestamp
>> 8;
1963 next_frame
->cip_syt1
->b
[7] = next_frame
->assigned_timestamp
& 0xFF;
1965 if (next_frame
->cip_syt2
) {
1966 next_frame
->cip_syt2
->b
[6] = next_frame
->assigned_timestamp
>> 8;
1967 next_frame
->cip_syt2
->b
[7] = next_frame
->assigned_timestamp
& 0xFF;
1972 /* see if the frame looped */
1973 if ( *(f
->frame_end_timestamp
) ) {
1975 *(f
->frame_end_timestamp
) = 0;
1977 debug_printk(" END - the frame looped at least once\n");
1979 video
->dropped_frames
++;
1982 } /* for (each frame) */
1986 kill_fasync(&video
->fasync
, SIGIO
, POLL_OUT
);
1988 /* wake readers/writers/ioctl'ers */
1989 wake_up_interruptible(&video
->waitq
);
1993 spin_unlock(&video
->spinlock
);
1996 static void ir_tasklet_func(unsigned long data
)
1999 struct video_card
*video
= (struct video_card
*) data
;
2001 spin_lock(&video
->spinlock
);
2003 if (!video
->dma_running
)
2006 if ( (video
->ohci_ir_ctx
!= -1) &&
2007 (reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
) & (1 << 10)) ) {
2009 int sof
=0; /* start-of-frame flag */
2011 u16 packet_length
, packet_time
;
2013 struct DMA_descriptor_block
*block
= NULL
;
2017 struct DMA_descriptor_block
*next
= NULL
;
2018 dma_addr_t next_dma
= 0;
2019 struct DMA_descriptor_block
*prev
= NULL
;
2021 /* loop over all descriptors in all frames */
2022 for (i
= 0; i
< video
->n_frames
*MAX_PACKETS
; i
++) {
2023 struct packet
*p
= dma_region_i(&video
->packet_buf
, struct packet
, video
->current_packet
);
2025 /* make sure we are seeing the latest changes to p */
2026 dma_region_sync_for_cpu(&video
->packet_buf
,
2027 (unsigned long) p
- (unsigned long) video
->packet_buf
.kvirt
,
2028 sizeof(struct packet
));
2030 packet_length
= le16_to_cpu(p
->data_length
);
2031 packet_time
= le16_to_cpu(p
->timestamp
);
2033 irq_printk("received packet %02d, timestamp=%04x, length=%04x, sof=%02x%02x\n", video
->current_packet
,
2034 packet_time
, packet_length
,
2035 p
->data
[0], p
->data
[1]);
2037 /* get the descriptor based on packet_buffer cursor */
2038 f
= video
->frames
[video
->current_packet
/ MAX_PACKETS
];
2039 block
= &(f
->descriptor_pool
[video
->current_packet
% MAX_PACKETS
]);
2040 xferstatus
= le32_to_cpu(block
->u
.in
.il
.q
[3]) >> 16;
2042 irq_printk("ir_tasklet_func: xferStatus/resCount [%d] = 0x%08x\n", i
, le32_to_cpu(block
->u
.in
.il
.q
[3]) );
2044 /* get the current frame */
2045 f
= video
->frames
[video
->active_frame
];
2047 /* exclude empty packet */
2048 if (packet_length
> 8 && xferstatus
== 0x11) {
2049 /* check for start of frame */
2050 /* DRD> Changed to check section type ([0]>>5==0)
2051 and dif sequence ([1]>>4==0) */
2052 sof
= ( (p
->data
[0] >> 5) == 0 && (p
->data
[1] >> 4) == 0);
2054 dbc
= (int) (p
->cip_h1
>> 24);
2055 if ( video
->continuity_counter
!= -1 && dbc
> ((video
->continuity_counter
+ 1) % 256) )
2057 printk(KERN_WARNING
"dv1394: discontinuity detected, dropping all frames\n" );
2058 video
->dropped_frames
+= video
->n_clear_frames
+ 1;
2059 video
->first_frame
= 0;
2060 video
->n_clear_frames
= 0;
2061 video
->first_clear_frame
= -1;
2063 video
->continuity_counter
= dbc
;
2065 if (!video
->first_frame
) {
2067 video
->first_frame
= 1;
2071 /* close current frame */
2072 frame_reset(f
); /* f->state = STATE_CLEAR */
2073 video
->n_clear_frames
++;
2074 if (video
->n_clear_frames
> video
->n_frames
) {
2075 video
->dropped_frames
++;
2076 printk(KERN_WARNING
"dv1394: dropped a frame during reception\n" );
2077 video
->n_clear_frames
= video
->n_frames
-1;
2078 video
->first_clear_frame
= (video
->first_clear_frame
+ 1) % video
->n_frames
;
2080 if (video
->first_clear_frame
== -1)
2081 video
->first_clear_frame
= video
->active_frame
;
2083 /* get the next frame */
2084 video
->active_frame
= (video
->active_frame
+ 1) % video
->n_frames
;
2085 f
= video
->frames
[video
->active_frame
];
2086 irq_printk(" frame received, active_frame = %d, n_clear_frames = %d, first_clear_frame = %d\n",
2087 video
->active_frame
, video
->n_clear_frames
, video
->first_clear_frame
);
2089 if (video
->first_frame
) {
2091 /* open next frame */
2092 f
->state
= FRAME_READY
;
2095 /* copy to buffer */
2096 if (f
->n_packets
> (video
->frame_size
/ 480)) {
2097 printk(KERN_ERR
"frame buffer overflow during receive\n");
2100 frame_put_packet(f
, p
);
2105 /* stop, end of ready packets */
2106 else if (xferstatus
== 0) {
2110 /* reset xferStatus & resCount */
2111 block
->u
.in
.il
.q
[3] = cpu_to_le32(512);
2113 /* terminate dma chain at this (next) packet */
2114 next_i
= video
->current_packet
;
2115 f
= video
->frames
[next_i
/ MAX_PACKETS
];
2116 next
= &(f
->descriptor_pool
[next_i
% MAX_PACKETS
]);
2117 next_dma
= ((unsigned long) block
- (unsigned long) f
->descriptor_pool
) + f
->descriptor_pool_dma
;
2118 next
->u
.in
.il
.q
[0] |= 3 << 20; /* enable interrupt */
2119 next
->u
.in
.il
.q
[2] = 0; /* disable branch */
2121 /* link previous to next */
2122 prev_i
= (next_i
== 0) ? (MAX_PACKETS
* video
->n_frames
- 1) : (next_i
- 1);
2123 f
= video
->frames
[prev_i
/ MAX_PACKETS
];
2124 prev
= &(f
->descriptor_pool
[prev_i
% MAX_PACKETS
]);
2125 if (prev_i
% (MAX_PACKETS
/2)) {
2126 prev
->u
.in
.il
.q
[0] &= ~(3 << 20); /* no interrupt */
2128 prev
->u
.in
.il
.q
[0] |= 3 << 20; /* enable interrupt */
2130 prev
->u
.in
.il
.q
[2] = cpu_to_le32(next_dma
| 1); /* set Z=1 */
2133 /* wake up DMA in case it fell asleep */
2134 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, (1 << 12));
2136 /* advance packet_buffer cursor */
2137 video
->current_packet
= (video
->current_packet
+ 1) % (MAX_PACKETS
* video
->n_frames
);
2139 } /* for all packets */
2141 wake
= 1; /* why the hell not? */
2143 } /* receive interrupt */
2146 kill_fasync(&video
->fasync
, SIGIO
, POLL_IN
);
2148 /* wake readers/writers/ioctl'ers */
2149 wake_up_interruptible(&video
->waitq
);
2153 spin_unlock(&video
->spinlock
);
2156 static struct cdev dv1394_cdev
;
2157 static struct file_operations dv1394_fops
=
2159 .owner
= THIS_MODULE
,
2160 .poll
= dv1394_poll
,
2161 .unlocked_ioctl
= dv1394_ioctl
,
2162 #ifdef CONFIG_COMPAT
2163 .compat_ioctl
= dv1394_compat_ioctl
,
2165 .mmap
= dv1394_mmap
,
2166 .open
= dv1394_open
,
2167 .write
= dv1394_write
,
2168 .read
= dv1394_read
,
2169 .release
= dv1394_release
,
2170 .fasync
= dv1394_fasync
,
2174 /*** HOTPLUG STUFF **********************************************************/
2176 * Export information about protocols/devices supported by this driver.
2178 static struct ieee1394_device_id dv1394_id_table
[] = {
2180 .match_flags
= IEEE1394_MATCH_SPECIFIER_ID
| IEEE1394_MATCH_VERSION
,
2181 .specifier_id
= AVC_UNIT_SPEC_ID_ENTRY
& 0xffffff,
2182 .version
= AVC_SW_VERSION_ENTRY
& 0xffffff
2187 MODULE_DEVICE_TABLE(ieee1394
, dv1394_id_table
);
2189 static struct hpsb_protocol_driver dv1394_driver
= {
2190 .name
= "DV/1394 Driver",
2191 .id_table
= dv1394_id_table
,
2194 .bus
= &ieee1394_bus_type
,
2199 /*** IEEE1394 HPSB CALLBACKS ***********************************************/
2201 static int dv1394_init(struct ti_ohci
*ohci
, enum pal_or_ntsc format
, enum modes mode
)
2203 struct video_card
*video
;
2204 unsigned long flags
;
2207 video
= kzalloc(sizeof(*video
), GFP_KERNEL
);
2209 printk(KERN_ERR
"dv1394: cannot allocate video_card\n");
2214 /* lower 2 bits of id indicate which of four "plugs"
2216 video
->id
= ohci
->host
->id
<< 2;
2217 if (format
== DV1394_NTSC
)
2220 video
->id
|= 2 + mode
;
2222 video
->ohci_it_ctx
= -1;
2223 video
->ohci_ir_ctx
= -1;
2225 video
->ohci_IsoXmitContextControlSet
= 0;
2226 video
->ohci_IsoXmitContextControlClear
= 0;
2227 video
->ohci_IsoXmitCommandPtr
= 0;
2229 video
->ohci_IsoRcvContextControlSet
= 0;
2230 video
->ohci_IsoRcvContextControlClear
= 0;
2231 video
->ohci_IsoRcvCommandPtr
= 0;
2232 video
->ohci_IsoRcvContextMatch
= 0;
2234 video
->n_frames
= 0; /* flag that video is not initialized */
2235 video
->channel
= 63; /* default to broadcast channel */
2236 video
->active_frame
= -1;
2238 /* initialize the following */
2239 video
->pal_or_ntsc
= format
;
2240 video
->cip_n
= 0; /* 0 = use builtin default */
2242 video
->syt_offset
= 0;
2245 for (i
= 0; i
< DV1394_MAX_FRAMES
; i
++)
2246 video
->frames
[i
] = NULL
;
2248 dma_region_init(&video
->dv_buf
);
2249 video
->dv_buf_size
= 0;
2250 dma_region_init(&video
->packet_buf
);
2251 video
->packet_buf_size
= 0;
2253 clear_bit(0, &video
->open
);
2254 spin_lock_init(&video
->spinlock
);
2255 video
->dma_running
= 0;
2256 init_MUTEX(&video
->sem
);
2257 init_waitqueue_head(&video
->waitq
);
2258 video
->fasync
= NULL
;
2260 spin_lock_irqsave(&dv1394_cards_lock
, flags
);
2261 INIT_LIST_HEAD(&video
->list
);
2262 list_add_tail(&video
->list
, &dv1394_cards
);
2263 spin_unlock_irqrestore(&dv1394_cards_lock
, flags
);
2265 debug_printk("dv1394: dv1394_init() OK on ID %d\n", video
->id
);
2269 static void dv1394_un_init(struct video_card
*video
)
2271 /* obviously nobody has the driver open at this point */
2272 do_dv1394_shutdown(video
, 1);
2277 static void dv1394_remove_host (struct hpsb_host
*host
)
2279 struct video_card
*video
;
2280 unsigned long flags
;
2283 /* We only work with the OHCI-1394 driver */
2284 if (strcmp(host
->driver
->name
, OHCI1394_DRIVER_NAME
))
2287 /* find the corresponding video_cards */
2289 struct video_card
*tmp_vid
;
2293 spin_lock_irqsave(&dv1394_cards_lock
, flags
);
2294 list_for_each_entry(tmp_vid
, &dv1394_cards
, list
) {
2295 if ((tmp_vid
->id
>> 2) == id
) {
2296 list_del(&tmp_vid
->list
);
2301 spin_unlock_irqrestore(&dv1394_cards_lock
, flags
);
2304 dv1394_un_init(video
);
2305 } while (video
!= NULL
);
2307 class_device_destroy(hpsb_protocol_class
,
2308 MKDEV(IEEE1394_MAJOR
, IEEE1394_MINOR_BLOCK_DV1394
* 16 + (id
<<2)));
2311 static void dv1394_add_host (struct hpsb_host
*host
)
2313 struct ti_ohci
*ohci
;
2316 /* We only work with the OHCI-1394 driver */
2317 if (strcmp(host
->driver
->name
, OHCI1394_DRIVER_NAME
))
2320 ohci
= (struct ti_ohci
*)host
->hostdata
;
2322 class_device_create(hpsb_protocol_class
, NULL
, MKDEV(
2323 IEEE1394_MAJOR
, IEEE1394_MINOR_BLOCK_DV1394
* 16 + (id
<<2)),
2324 NULL
, "dv1394-%d", id
);
2326 dv1394_init(ohci
, DV1394_NTSC
, MODE_RECEIVE
);
2327 dv1394_init(ohci
, DV1394_NTSC
, MODE_TRANSMIT
);
2328 dv1394_init(ohci
, DV1394_PAL
, MODE_RECEIVE
);
2329 dv1394_init(ohci
, DV1394_PAL
, MODE_TRANSMIT
);
2333 /* Bus reset handler. In the event of a bus reset, we may need to
2334 re-start the DMA contexts - otherwise the user program would
2335 end up waiting forever.
2338 static void dv1394_host_reset(struct hpsb_host
*host
)
2340 struct ti_ohci
*ohci
;
2341 struct video_card
*video
= NULL
, *tmp_vid
;
2342 unsigned long flags
;
2344 /* We only work with the OHCI-1394 driver */
2345 if (strcmp(host
->driver
->name
, OHCI1394_DRIVER_NAME
))
2348 ohci
= (struct ti_ohci
*)host
->hostdata
;
2351 /* find the corresponding video_cards */
2352 spin_lock_irqsave(&dv1394_cards_lock
, flags
);
2353 list_for_each_entry(tmp_vid
, &dv1394_cards
, list
) {
2354 if ((tmp_vid
->id
>> 2) == host
->id
) {
2359 spin_unlock_irqrestore(&dv1394_cards_lock
, flags
);
2365 spin_lock_irqsave(&video
->spinlock
, flags
);
2367 if (!video
->dma_running
)
2370 /* check IT context */
2371 if (video
->ohci_it_ctx
!= -1) {
2374 ctx
= reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
);
2376 /* if (RUN but not ACTIVE) */
2377 if ( (ctx
& (1<<15)) &&
2378 !(ctx
& (1<<10)) ) {
2380 debug_printk("dv1394: IT context stopped due to bus reset; waking it up\n");
2382 /* to be safe, assume a frame has been dropped. User-space programs
2383 should handle this condition like an underflow. */
2384 video
->dropped_frames
++;
2386 /* for some reason you must clear, then re-set the RUN bit to restart DMA */
2389 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlClear
, (1 << 15));
2390 flush_pci_write(video
->ohci
);
2393 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlSet
, (1 << 15));
2394 flush_pci_write(video
->ohci
);
2396 /* set the WAKE bit (just in case; this isn't strictly necessary) */
2397 reg_write(video
->ohci
, video
->ohci_IsoXmitContextControlSet
, (1 << 12));
2398 flush_pci_write(video
->ohci
);
2400 irq_printk("dv1394: AFTER IT restart ctx 0x%08x ptr 0x%08x\n",
2401 reg_read(video
->ohci
, video
->ohci_IsoXmitContextControlSet
),
2402 reg_read(video
->ohci
, video
->ohci_IsoXmitCommandPtr
));
2406 /* check IR context */
2407 if (video
->ohci_ir_ctx
!= -1) {
2410 ctx
= reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
);
2412 /* if (RUN but not ACTIVE) */
2413 if ( (ctx
& (1<<15)) &&
2414 !(ctx
& (1<<10)) ) {
2416 debug_printk("dv1394: IR context stopped due to bus reset; waking it up\n");
2418 /* to be safe, assume a frame has been dropped. User-space programs
2419 should handle this condition like an overflow. */
2420 video
->dropped_frames
++;
2422 /* for some reason you must clear, then re-set the RUN bit to restart DMA */
2423 /* XXX this doesn't work for me, I can't get IR DMA to restart :[ */
2426 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlClear
, (1 << 15));
2427 flush_pci_write(video
->ohci
);
2430 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, (1 << 15));
2431 flush_pci_write(video
->ohci
);
2433 /* set the WAKE bit (just in case; this isn't strictly necessary) */
2434 reg_write(video
->ohci
, video
->ohci_IsoRcvContextControlSet
, (1 << 12));
2435 flush_pci_write(video
->ohci
);
2437 irq_printk("dv1394: AFTER IR restart ctx 0x%08x ptr 0x%08x\n",
2438 reg_read(video
->ohci
, video
->ohci_IsoRcvContextControlSet
),
2439 reg_read(video
->ohci
, video
->ohci_IsoRcvCommandPtr
));
2444 spin_unlock_irqrestore(&video
->spinlock
, flags
);
2446 /* wake readers/writers/ioctl'ers */
2447 wake_up_interruptible(&video
->waitq
);
2450 static struct hpsb_highlevel dv1394_highlevel
= {
2452 .add_host
= dv1394_add_host
,
2453 .remove_host
= dv1394_remove_host
,
2454 .host_reset
= dv1394_host_reset
,
2457 #ifdef CONFIG_COMPAT
2459 #define DV1394_IOC32_INIT _IOW('#', 0x06, struct dv1394_init32)
2460 #define DV1394_IOC32_GET_STATUS _IOR('#', 0x0c, struct dv1394_status32)
2462 struct dv1394_init32
{
2472 struct dv1394_status32
{
2473 struct dv1394_init32 init
;
2475 u32 first_clear_frame
;
2480 /* RED-PEN: this should use compat_alloc_userspace instead */
2482 static int handle_dv1394_init(struct file
*file
, unsigned int cmd
, unsigned long arg
)
2484 struct dv1394_init32 dv32
;
2485 struct dv1394_init dv
;
2486 mm_segment_t old_fs
;
2489 if (file
->f_op
->unlocked_ioctl
!= dv1394_ioctl
)
2492 if (copy_from_user(&dv32
, (void __user
*)arg
, sizeof(dv32
)))
2495 dv
.api_version
= dv32
.api_version
;
2496 dv
.channel
= dv32
.channel
;
2497 dv
.n_frames
= dv32
.n_frames
;
2498 dv
.format
= dv32
.format
;
2499 dv
.cip_n
= (unsigned long)dv32
.cip_n
;
2500 dv
.cip_d
= (unsigned long)dv32
.cip_d
;
2501 dv
.syt_offset
= dv32
.syt_offset
;
2505 ret
= dv1394_ioctl(file
, DV1394_IOC_INIT
, (unsigned long)&dv
);
2511 static int handle_dv1394_get_status(struct file
*file
, unsigned int cmd
, unsigned long arg
)
2513 struct dv1394_status32 dv32
;
2514 struct dv1394_status dv
;
2515 mm_segment_t old_fs
;
2518 if (file
->f_op
->unlocked_ioctl
!= dv1394_ioctl
)
2523 ret
= dv1394_ioctl(file
, DV1394_IOC_GET_STATUS
, (unsigned long)&dv
);
2527 dv32
.init
.api_version
= dv
.init
.api_version
;
2528 dv32
.init
.channel
= dv
.init
.channel
;
2529 dv32
.init
.n_frames
= dv
.init
.n_frames
;
2530 dv32
.init
.format
= dv
.init
.format
;
2531 dv32
.init
.cip_n
= (u32
)dv
.init
.cip_n
;
2532 dv32
.init
.cip_d
= (u32
)dv
.init
.cip_d
;
2533 dv32
.init
.syt_offset
= dv
.init
.syt_offset
;
2534 dv32
.active_frame
= dv
.active_frame
;
2535 dv32
.first_clear_frame
= dv
.first_clear_frame
;
2536 dv32
.n_clear_frames
= dv
.n_clear_frames
;
2537 dv32
.dropped_frames
= dv
.dropped_frames
;
2539 if (copy_to_user((struct dv1394_status32 __user
*)arg
, &dv32
, sizeof(dv32
)))
2548 static long dv1394_compat_ioctl(struct file
*file
, unsigned int cmd
,
2552 case DV1394_IOC_SHUTDOWN
:
2553 case DV1394_IOC_SUBMIT_FRAMES
:
2554 case DV1394_IOC_WAIT_FRAMES
:
2555 case DV1394_IOC_RECEIVE_FRAMES
:
2556 case DV1394_IOC_START_RECEIVE
:
2557 return dv1394_ioctl(file
, cmd
, arg
);
2559 case DV1394_IOC32_INIT
:
2560 return handle_dv1394_init(file
, cmd
, arg
);
2561 case DV1394_IOC32_GET_STATUS
:
2562 return handle_dv1394_get_status(file
, cmd
, arg
);
2564 return -ENOIOCTLCMD
;
2568 #endif /* CONFIG_COMPAT */
2571 /*** KERNEL MODULE HANDLERS ************************************************/
2573 MODULE_AUTHOR("Dan Maas <dmaas@dcine.com>, Dan Dennedy <dan@dennedy.org>");
2574 MODULE_DESCRIPTION("driver for DV input/output on OHCI board");
2575 MODULE_SUPPORTED_DEVICE("dv1394");
2576 MODULE_LICENSE("GPL");
2578 static void __exit
dv1394_exit_module(void)
2580 hpsb_unregister_protocol(&dv1394_driver
);
2581 hpsb_unregister_highlevel(&dv1394_highlevel
);
2582 cdev_del(&dv1394_cdev
);
2585 static int __init
dv1394_init_module(void)
2589 cdev_init(&dv1394_cdev
, &dv1394_fops
);
2590 dv1394_cdev
.owner
= THIS_MODULE
;
2591 kobject_set_name(&dv1394_cdev
.kobj
, "dv1394");
2592 ret
= cdev_add(&dv1394_cdev
, IEEE1394_DV1394_DEV
, 16);
2594 printk(KERN_ERR
"dv1394: unable to register character device\n");
2598 hpsb_register_highlevel(&dv1394_highlevel
);
2600 ret
= hpsb_register_protocol(&dv1394_driver
);
2602 printk(KERN_ERR
"dv1394: failed to register protocol\n");
2603 hpsb_unregister_highlevel(&dv1394_highlevel
);
2604 cdev_del(&dv1394_cdev
);
2611 module_init(dv1394_init_module
);
2612 module_exit(dv1394_exit_module
);