Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wirel...

[linux-2.6/kmemtrace.git] / drivers / net / wireless / bcm43xx / bcm43xx.h

#ifndef BCM43xx_H_
#define BCM43xx_H_

#include <linux/hw_random.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/stringify.h>
#include <linux/pci.h>
#include <net/ieee80211.h>
#include <net/ieee80211softmac.h>
#include <asm/atomic.h>
#include <asm/io.h>


#include "bcm43xx_debugfs.h"
#include "bcm43xx_leds.h"


#define PFX                             KBUILD_MODNAME ": "

#define BCM43xx_SWITCH_CORE_MAX_RETRIES 50
#define BCM43xx_IRQWAIT_MAX_RETRIES     50

#define BCM43xx_IO_SIZE                 8192

/* Active Core PCI Configuration Register. */
#define BCM43xx_PCICFG_ACTIVE_CORE      0x80
/* SPROM control register. */
#define BCM43xx_PCICFG_SPROMCTL         0x88
/* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */
#define BCM43xx_PCICFG_ICR              0x94

/* MMIO offsets */
#define BCM43xx_MMIO_DMA0_REASON        0x20
#define BCM43xx_MMIO_DMA0_IRQ_MASK      0x24
#define BCM43xx_MMIO_DMA1_REASON        0x28
#define BCM43xx_MMIO_DMA1_IRQ_MASK      0x2C
#define BCM43xx_MMIO_DMA2_REASON        0x30
#define BCM43xx_MMIO_DMA2_IRQ_MASK      0x34
#define BCM43xx_MMIO_DMA3_REASON        0x38
#define BCM43xx_MMIO_DMA3_IRQ_MASK      0x3C
#define BCM43xx_MMIO_DMA4_REASON        0x40
#define BCM43xx_MMIO_DMA4_IRQ_MASK      0x44
#define BCM43xx_MMIO_DMA5_REASON        0x48
#define BCM43xx_MMIO_DMA5_IRQ_MASK      0x4C
#define BCM43xx_MMIO_STATUS_BITFIELD    0x120
#define BCM43xx_MMIO_STATUS2_BITFIELD   0x124
#define BCM43xx_MMIO_GEN_IRQ_REASON     0x128
#define BCM43xx_MMIO_GEN_IRQ_MASK       0x12C
#define BCM43xx_MMIO_RAM_CONTROL        0x130
#define BCM43xx_MMIO_RAM_DATA           0x134
#define BCM43xx_MMIO_PS_STATUS          0x140
#define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158
#define BCM43xx_MMIO_SHM_CONTROL        0x160
#define BCM43xx_MMIO_SHM_DATA           0x164
#define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166
#define BCM43xx_MMIO_XMITSTAT_0         0x170
#define BCM43xx_MMIO_XMITSTAT_1         0x174
#define BCM43xx_MMIO_REV3PLUS_TSF_LOW   0x180 /* core rev >= 3 only */
#define BCM43xx_MMIO_REV3PLUS_TSF_HIGH  0x184 /* core rev >= 3 only */

/* 32-bit DMA */
#define BCM43xx_MMIO_DMA32_BASE0        0x200
#define BCM43xx_MMIO_DMA32_BASE1        0x220
#define BCM43xx_MMIO_DMA32_BASE2        0x240
#define BCM43xx_MMIO_DMA32_BASE3        0x260
#define BCM43xx_MMIO_DMA32_BASE4        0x280
#define BCM43xx_MMIO_DMA32_BASE5        0x2A0
/* 64-bit DMA */
#define BCM43xx_MMIO_DMA64_BASE0        0x200
#define BCM43xx_MMIO_DMA64_BASE1        0x240
#define BCM43xx_MMIO_DMA64_BASE2        0x280
#define BCM43xx_MMIO_DMA64_BASE3        0x2C0
#define BCM43xx_MMIO_DMA64_BASE4        0x300
#define BCM43xx_MMIO_DMA64_BASE5        0x340
/* PIO */
#define BCM43xx_MMIO_PIO1_BASE          0x300
#define BCM43xx_MMIO_PIO2_BASE          0x310
#define BCM43xx_MMIO_PIO3_BASE          0x320
#define BCM43xx_MMIO_PIO4_BASE          0x330

#define BCM43xx_MMIO_PHY_VER            0x3E0
#define BCM43xx_MMIO_PHY_RADIO          0x3E2
#define BCM43xx_MMIO_ANTENNA            0x3E8
#define BCM43xx_MMIO_CHANNEL            0x3F0
#define BCM43xx_MMIO_CHANNEL_EXT        0x3F4
#define BCM43xx_MMIO_RADIO_CONTROL      0x3F6
#define BCM43xx_MMIO_RADIO_DATA_HIGH    0x3F8
#define BCM43xx_MMIO_RADIO_DATA_LOW     0x3FA
#define BCM43xx_MMIO_PHY_CONTROL        0x3FC
#define BCM43xx_MMIO_PHY_DATA           0x3FE
#define BCM43xx_MMIO_MACFILTER_CONTROL  0x420
#define BCM43xx_MMIO_MACFILTER_DATA     0x422
#define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A
#define BCM43xx_MMIO_GPIO_CONTROL       0x49C
#define BCM43xx_MMIO_GPIO_MASK          0x49E
#define BCM43xx_MMIO_TSF_0              0x632 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_1              0x634 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_2              0x636 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_3              0x638 /* core rev < 3 only */
#define BCM43xx_MMIO_RNG                0x65A
#define BCM43xx_MMIO_POWERUP_DELAY      0x6A8

/* SPROM offsets. */
#define BCM43xx_SPROM_BASE              0x1000
#define BCM43xx_SPROM_BOARDFLAGS2       0x1c
#define BCM43xx_SPROM_IL0MACADDR        0x24
#define BCM43xx_SPROM_ET0MACADDR        0x27
#define BCM43xx_SPROM_ET1MACADDR        0x2a
#define BCM43xx_SPROM_ETHPHY            0x2d
#define BCM43xx_SPROM_BOARDREV          0x2e
#define BCM43xx_SPROM_PA0B0             0x2f
#define BCM43xx_SPROM_PA0B1             0x30
#define BCM43xx_SPROM_PA0B2             0x31
#define BCM43xx_SPROM_WL0GPIO0          0x32
#define BCM43xx_SPROM_WL0GPIO2          0x33
#define BCM43xx_SPROM_MAXPWR            0x34
#define BCM43xx_SPROM_PA1B0             0x35
#define BCM43xx_SPROM_PA1B1             0x36
#define BCM43xx_SPROM_PA1B2             0x37
#define BCM43xx_SPROM_IDL_TSSI_TGT      0x38
#define BCM43xx_SPROM_BOARDFLAGS        0x39
#define BCM43xx_SPROM_ANTENNA_GAIN      0x3a
#define BCM43xx_SPROM_VERSION           0x3f

/* BCM43xx_SPROM_BOARDFLAGS values */
#define BCM43xx_BFL_BTCOEXIST           0x0001 /* implements Bluetooth coexistance */
#define BCM43xx_BFL_PACTRL              0x0002 /* GPIO 9 controlling the PA */
#define BCM43xx_BFL_AIRLINEMODE         0x0004 /* implements GPIO 13 radio disable indication */
#define BCM43xx_BFL_RSSI                0x0008 /* software calculates nrssi slope. */
#define BCM43xx_BFL_ENETSPI             0x0010 /* has ephy roboswitch spi */
#define BCM43xx_BFL_XTAL_NOSLOW         0x0020 /* no slow clock available */
#define BCM43xx_BFL_CCKHIPWR            0x0040 /* can do high power CCK transmission */
#define BCM43xx_BFL_ENETADM             0x0080 /* has ADMtek switch */
#define BCM43xx_BFL_ENETVLAN            0x0100 /* can do vlan */
#define BCM43xx_BFL_AFTERBURNER         0x0200 /* supports Afterburner mode */
#define BCM43xx_BFL_NOPCI               0x0400 /* leaves PCI floating */
#define BCM43xx_BFL_FEM                 0x0800 /* supports the Front End Module */
#define BCM43xx_BFL_EXTLNA              0x1000 /* has an external LNA */
#define BCM43xx_BFL_HGPA                0x2000 /* had high gain PA */
#define BCM43xx_BFL_BTCMOD              0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
#define BCM43xx_BFL_ALTIQ               0x8000 /* alternate I/Q settings */

/* GPIO register offset, in both ChipCommon and PCI core. */
#define BCM43xx_GPIO_CONTROL            0x6c

/* SHM Routing */
#define BCM43xx_SHM_SHARED              0x0001
#define BCM43xx_SHM_WIRELESS            0x0002
#define BCM43xx_SHM_PCM                 0x0003
#define BCM43xx_SHM_HWMAC               0x0004
#define BCM43xx_SHM_UCODE               0x0300

/* MacFilter offsets. */
#define BCM43xx_MACFILTER_SELF          0x0000
#define BCM43xx_MACFILTER_ASSOC         0x0003

/* Chipcommon registers. */
#define BCM43xx_CHIPCOMMON_CAPABILITIES         0x04
#define BCM43xx_CHIPCOMMON_CTL                  0x28
#define BCM43xx_CHIPCOMMON_PLLONDELAY           0xB0
#define BCM43xx_CHIPCOMMON_FREFSELDELAY         0xB4
#define BCM43xx_CHIPCOMMON_SLOWCLKCTL           0xB8
#define BCM43xx_CHIPCOMMON_SYSCLKCTL            0xC0

/* PCI core specific registers. */
#define BCM43xx_PCICORE_BCAST_ADDR      0x50
#define BCM43xx_PCICORE_BCAST_DATA      0x54
#define BCM43xx_PCICORE_SBTOPCI2        0x108

/* SBTOPCI2 values. */
#define BCM43xx_SBTOPCI2_PREFETCH       0x4
#define BCM43xx_SBTOPCI2_BURST          0x8
#define BCM43xx_SBTOPCI2_MEMREAD_MULTI  0x20

/* PCI-E core registers. */
#define BCM43xx_PCIECORE_REG_ADDR      0x0130
#define BCM43xx_PCIECORE_REG_DATA      0x0134
#define BCM43xx_PCIECORE_MDIO_CTL      0x0128
#define BCM43xx_PCIECORE_MDIO_DATA     0x012C

/* PCI-E registers. */
#define BCM43xx_PCIE_TLP_WORKAROUND    0x0004
#define BCM43xx_PCIE_DLLP_LINKCTL      0x0100

/* PCI-E MDIO bits. */
#define BCM43xx_PCIE_MDIO_ST   0x40000000
#define BCM43xx_PCIE_MDIO_WT   0x10000000
#define BCM43xx_PCIE_MDIO_DEV  22
#define BCM43xx_PCIE_MDIO_REG  18
#define BCM43xx_PCIE_MDIO_TA   0x00020000
#define BCM43xx_PCIE_MDIO_TC   0x0100

/* MDIO devices. */
#define BCM43xx_MDIO_SERDES_RX  0x1F

/* SERDES RX registers. */
#define BCM43xx_SERDES_RXTIMER  0x2
#define BCM43xx_SERDES_CDR      0x6
#define BCM43xx_SERDES_CDR_BW   0x7

/* Chipcommon capabilities. */
#define BCM43xx_CAPABILITIES_PCTL               0x00040000
#define BCM43xx_CAPABILITIES_PLLMASK            0x00030000
#define BCM43xx_CAPABILITIES_PLLSHIFT           16
#define BCM43xx_CAPABILITIES_FLASHMASK          0x00000700
#define BCM43xx_CAPABILITIES_FLASHSHIFT         8
#define BCM43xx_CAPABILITIES_EXTBUSPRESENT      0x00000040
#define BCM43xx_CAPABILITIES_UARTGPIO           0x00000020
#define BCM43xx_CAPABILITIES_UARTCLOCKMASK      0x00000018
#define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT     3
#define BCM43xx_CAPABILITIES_MIPSBIGENDIAN      0x00000004
#define BCM43xx_CAPABILITIES_NRUARTSMASK        0x00000003

/* PowerControl */
#define BCM43xx_PCTL_IN                 0xB0
#define BCM43xx_PCTL_OUT                0xB4
#define BCM43xx_PCTL_OUTENABLE          0xB8
#define BCM43xx_PCTL_XTAL_POWERUP       0x40
#define BCM43xx_PCTL_PLL_POWERDOWN      0x80

/* PowerControl Clock Modes */
#define BCM43xx_PCTL_CLK_FAST           0x00
#define BCM43xx_PCTL_CLK_SLOW           0x01
#define BCM43xx_PCTL_CLK_DYNAMIC        0x02

#define BCM43xx_PCTL_FORCE_SLOW         0x0800
#define BCM43xx_PCTL_FORCE_PLL          0x1000
#define BCM43xx_PCTL_DYN_XTAL           0x2000

/* COREIDs */
#define BCM43xx_COREID_CHIPCOMMON       0x800
#define BCM43xx_COREID_ILINE20          0x801
#define BCM43xx_COREID_SDRAM            0x803
#define BCM43xx_COREID_PCI              0x804
#define BCM43xx_COREID_MIPS             0x805
#define BCM43xx_COREID_ETHERNET         0x806
#define BCM43xx_COREID_V90              0x807
#define BCM43xx_COREID_USB11_HOSTDEV    0x80a
#define BCM43xx_COREID_IPSEC            0x80b
#define BCM43xx_COREID_PCMCIA           0x80d
#define BCM43xx_COREID_EXT_IF           0x80f
#define BCM43xx_COREID_80211            0x812
#define BCM43xx_COREID_MIPS_3302        0x816
#define BCM43xx_COREID_USB11_HOST       0x817
#define BCM43xx_COREID_USB11_DEV        0x818
#define BCM43xx_COREID_USB20_HOST       0x819
#define BCM43xx_COREID_USB20_DEV        0x81a
#define BCM43xx_COREID_SDIO_HOST        0x81b
#define BCM43xx_COREID_PCIE             0x820

/* Core Information Registers */
#define BCM43xx_CIR_BASE                0xf00
#define BCM43xx_CIR_SBTPSFLAG           (BCM43xx_CIR_BASE + 0x18)
#define BCM43xx_CIR_SBIMSTATE           (BCM43xx_CIR_BASE + 0x90)
#define BCM43xx_CIR_SBINTVEC            (BCM43xx_CIR_BASE + 0x94)
#define BCM43xx_CIR_SBTMSTATELOW        (BCM43xx_CIR_BASE + 0x98)
#define BCM43xx_CIR_SBTMSTATEHIGH       (BCM43xx_CIR_BASE + 0x9c)
#define BCM43xx_CIR_SBIMCONFIGLOW       (BCM43xx_CIR_BASE + 0xa8)
#define BCM43xx_CIR_SB_ID_HI            (BCM43xx_CIR_BASE + 0xfc)

/* Mask to get the Backplane Flag Number from SBTPSFLAG. */
#define BCM43xx_BACKPLANE_FLAG_NR_MASK  0x3f

/* SBIMCONFIGLOW values/masks. */
#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK         0x00000007
#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT        0
#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK         0x00000070
#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT        4
#define BCM43xx_SBIMCONFIGLOW_CONNID_MASK               0x00ff0000
#define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT              16

/* sbtmstatelow state flags */
#define BCM43xx_SBTMSTATELOW_RESET              0x01
#define BCM43xx_SBTMSTATELOW_REJECT             0x02
#define BCM43xx_SBTMSTATELOW_CLOCK              0x10000
#define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK   0x20000

/* sbtmstatehigh state flags */
#define BCM43xx_SBTMSTATEHIGH_SERROR            0x00000001
#define BCM43xx_SBTMSTATEHIGH_BUSY              0x00000004
#define BCM43xx_SBTMSTATEHIGH_TIMEOUT           0x00000020
#define BCM43xx_SBTMSTATEHIGH_COREFLAGS         0x1FFF0000
#define BCM43xx_SBTMSTATEHIGH_DMA64BIT          0x10000000
#define BCM43xx_SBTMSTATEHIGH_GATEDCLK          0x20000000
#define BCM43xx_SBTMSTATEHIGH_BISTFAILED        0x40000000
#define BCM43xx_SBTMSTATEHIGH_BISTCOMPLETE      0x80000000

/* sbimstate flags */
#define BCM43xx_SBIMSTATE_IB_ERROR              0x20000
#define BCM43xx_SBIMSTATE_TIMEOUT               0x40000

/* PHYVersioning */
#define BCM43xx_PHYTYPE_A               0x00
#define BCM43xx_PHYTYPE_B               0x01
#define BCM43xx_PHYTYPE_G               0x02

/* PHYRegisters */
#define BCM43xx_PHY_ILT_A_CTRL          0x0072
#define BCM43xx_PHY_ILT_A_DATA1         0x0073
#define BCM43xx_PHY_ILT_A_DATA2         0x0074
#define BCM43xx_PHY_G_LO_CONTROL        0x0810
#define BCM43xx_PHY_ILT_G_CTRL          0x0472
#define BCM43xx_PHY_ILT_G_DATA1         0x0473
#define BCM43xx_PHY_ILT_G_DATA2         0x0474
#define BCM43xx_PHY_A_PCTL              0x007B
#define BCM43xx_PHY_G_PCTL              0x0029
#define BCM43xx_PHY_A_CRS               0x0029
#define BCM43xx_PHY_RADIO_BITFIELD      0x0401
#define BCM43xx_PHY_G_CRS               0x0429
#define BCM43xx_PHY_NRSSILT_CTRL        0x0803
#define BCM43xx_PHY_NRSSILT_DATA        0x0804

/* RadioRegisters */
#define BCM43xx_RADIOCTL_ID             0x01

/* StatusBitField */
#define BCM43xx_SBF_MAC_ENABLED         0x00000001
#define BCM43xx_SBF_2                   0x00000002 /*FIXME: fix name*/
#define BCM43xx_SBF_CORE_READY          0x00000004
#define BCM43xx_SBF_400                 0x00000400 /*FIXME: fix name*/
#define BCM43xx_SBF_4000                0x00004000 /*FIXME: fix name*/
#define BCM43xx_SBF_8000                0x00008000 /*FIXME: fix name*/
#define BCM43xx_SBF_XFER_REG_BYTESWAP   0x00010000
#define BCM43xx_SBF_MODE_NOTADHOC       0x00020000
#define BCM43xx_SBF_MODE_AP             0x00040000
#define BCM43xx_SBF_RADIOREG_LOCK       0x00080000
#define BCM43xx_SBF_MODE_MONITOR        0x00400000
#define BCM43xx_SBF_MODE_PROMISC        0x01000000
#define BCM43xx_SBF_PS1                 0x02000000
#define BCM43xx_SBF_PS2                 0x04000000
#define BCM43xx_SBF_NO_SSID_BCAST       0x08000000
#define BCM43xx_SBF_TIME_UPDATE         0x10000000
#define BCM43xx_SBF_80000000            0x80000000 /*FIXME: fix name*/

/* Microcode */
#define BCM43xx_UCODE_REVISION          0x0000
#define BCM43xx_UCODE_PATCHLEVEL        0x0002
#define BCM43xx_UCODE_DATE              0x0004
#define BCM43xx_UCODE_TIME              0x0006
#define BCM43xx_UCODE_STATUS            0x0040

/* MicrocodeFlagsBitfield (addr + lo-word values?)*/
#define BCM43xx_UCODEFLAGS_OFFSET       0x005E

#define BCM43xx_UCODEFLAG_AUTODIV       0x0001
#define BCM43xx_UCODEFLAG_UNKBGPHY      0x0002
#define BCM43xx_UCODEFLAG_UNKBPHY       0x0004
#define BCM43xx_UCODEFLAG_UNKGPHY       0x0020
#define BCM43xx_UCODEFLAG_UNKPACTRL     0x0040
#define BCM43xx_UCODEFLAG_JAPAN         0x0080

/* Hardware Radio Enable masks */
#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)

/* Generic-Interrupt reasons. */
#define BCM43xx_IRQ_READY               (1 << 0)
#define BCM43xx_IRQ_BEACON              (1 << 1)
#define BCM43xx_IRQ_PS                  (1 << 2)
#define BCM43xx_IRQ_REG124              (1 << 5)
#define BCM43xx_IRQ_PMQ                 (1 << 6)
#define BCM43xx_IRQ_PIO_WORKAROUND      (1 << 8)
#define BCM43xx_IRQ_XMIT_ERROR          (1 << 11)
#define BCM43xx_IRQ_RX                  (1 << 15)
#define BCM43xx_IRQ_SCAN                (1 << 16)
#define BCM43xx_IRQ_NOISE               (1 << 18)
#define BCM43xx_IRQ_XMIT_STATUS         (1 << 29)

#define BCM43xx_IRQ_ALL                 0xffffffff
#define BCM43xx_IRQ_INITIAL             (BCM43xx_IRQ_PS |               \
                                         BCM43xx_IRQ_REG124 |           \
                                         BCM43xx_IRQ_PMQ |              \
                                         BCM43xx_IRQ_XMIT_ERROR |       \
                                         BCM43xx_IRQ_RX |               \
                                         BCM43xx_IRQ_SCAN |             \
                                         BCM43xx_IRQ_NOISE |            \
                                         BCM43xx_IRQ_XMIT_STATUS)
                                         

/* Initial default iw_mode */
#define BCM43xx_INITIAL_IWMODE                  IW_MODE_INFRA

/* Bus type PCI. */
#define BCM43xx_BUSTYPE_PCI     0
/* Bus type Silicone Backplane Bus. */
#define BCM43xx_BUSTYPE_SB      1
/* Bus type PCMCIA. */
#define BCM43xx_BUSTYPE_PCMCIA  2

/* Threshold values. */
#define BCM43xx_MIN_RTS_THRESHOLD               1U
#define BCM43xx_MAX_RTS_THRESHOLD               2304U
#define BCM43xx_DEFAULT_RTS_THRESHOLD           BCM43xx_MAX_RTS_THRESHOLD

#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT       7
#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT        4

/* FIXME: the next line is a guess as to what the maximum RSSI value might be */
#define RX_RSSI_MAX                             60

/* Max size of a security key */
#define BCM43xx_SEC_KEYSIZE                     16
/* Security algorithms. */
enum {
        BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
        BCM43xx_SEC_ALGO_WEP,
        BCM43xx_SEC_ALGO_UNKNOWN,
        BCM43xx_SEC_ALGO_AES,
        BCM43xx_SEC_ALGO_WEP104,
        BCM43xx_SEC_ALGO_TKIP,
};

#ifdef assert
# undef assert
#endif
#ifdef CONFIG_BCM43XX_DEBUG
#define assert(expr) \
        do {                                                                    \
                if (unlikely(!(expr))) {                                        \
                printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n",   \
                        #expr, __FILE__, __LINE__, __FUNCTION__);               \
                }                                                               \
        } while (0)
#else
#define assert(expr)    do { /* nothing */ } while (0)
#endif

/* rate limited printk(). */
#ifdef printkl
# undef printkl
#endif
#define printkl(f, x...)  do { if (printk_ratelimit()) printk(f ,##x); } while (0)
/* rate limited printk() for debugging */
#ifdef dprintkl
# undef dprintkl
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define dprintkl               printkl
#else
# define dprintkl(f, x...)      do { /* nothing */ } while (0)
#endif

/* Helper macro for if branches.
 * An if branch marked with this macro is only taken in DEBUG mode.
 * Example:
 *      if (DEBUG_ONLY(foo == bar)) {
 *              do something
 *      }
 *      In DEBUG mode, the branch will be taken if (foo == bar).
 *      In non-DEBUG mode, the branch will never be taken.
 */
#ifdef DEBUG_ONLY
# undef DEBUG_ONLY
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define DEBUG_ONLY(x)  (x)
#else
# define DEBUG_ONLY(x)  0
#endif

/* debugging printk() */
#ifdef dprintk
# undef dprintk
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define dprintk(f, x...)  do { printk(f ,##x); } while (0)
#else
# define dprintk(f, x...)  do { /* nothing */ } while (0)
#endif


struct net_device;
struct pci_dev;
struct bcm43xx_dmaring;
struct bcm43xx_pioqueue;

struct bcm43xx_initval {
        u16 offset;
        u16 size;
        u32 value;
} __attribute__((__packed__));

/* Values for bcm430x_sprominfo.locale */
enum {
        BCM43xx_LOCALE_WORLD = 0,
        BCM43xx_LOCALE_THAILAND,
        BCM43xx_LOCALE_ISRAEL,
        BCM43xx_LOCALE_JORDAN,
        BCM43xx_LOCALE_CHINA,
        BCM43xx_LOCALE_JAPAN,
        BCM43xx_LOCALE_USA_CANADA_ANZ,
        BCM43xx_LOCALE_EUROPE,
        BCM43xx_LOCALE_USA_LOW,
        BCM43xx_LOCALE_JAPAN_HIGH,
        BCM43xx_LOCALE_ALL,
        BCM43xx_LOCALE_NONE,
};

#define BCM43xx_SPROM_SIZE      64 /* in 16-bit words. */
struct bcm43xx_sprominfo {
        u16 boardflags2;
        u8 il0macaddr[6];
        u8 et0macaddr[6];
        u8 et1macaddr[6];
        u8 et0phyaddr:5;
        u8 et1phyaddr:5;
        u8 et0mdcport:1;
        u8 et1mdcport:1;
        u8 boardrev;
        u8 locale:4;
        u8 antennas_aphy:2;
        u8 antennas_bgphy:2;
        u16 pa0b0;
        u16 pa0b1;
        u16 pa0b2;
        u8 wl0gpio0;
        u8 wl0gpio1;
        u8 wl0gpio2;
        u8 wl0gpio3;
        u8 maxpower_aphy;
        u8 maxpower_bgphy;
        u16 pa1b0;
        u16 pa1b1;
        u16 pa1b2;
        u8 idle_tssi_tgt_aphy;
        u8 idle_tssi_tgt_bgphy;
        u16 boardflags;
        u16 antennagain_aphy;
        u16 antennagain_bgphy;
};

/* Value pair to measure the LocalOscillator. */
struct bcm43xx_lopair {
        s8 low;
        s8 high;
        u8 used:1;
};
#define BCM43xx_LO_COUNT        (14*4)

struct bcm43xx_phyinfo {
        /* Hardware Data */
        u8 version;
        u8 type;
        u8 rev;
        u16 antenna_diversity;
        u16 savedpctlreg;
        u16 minlowsig[2];
        u16 minlowsigpos[2];
        u8 connected:1,
           calibrated:1,
           is_locked:1, /* used in bcm43xx_phy_{un}lock() */
           dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */
        /* LO Measurement Data.
         * Use bcm43xx_get_lopair() to get a value.
         */
        struct bcm43xx_lopair *_lo_pairs;

        /* TSSI to dBm table in use */
        const s8 *tssi2dbm;
        /* idle TSSI value */
        s8 idle_tssi;

        /* Values from bcm43xx_calc_loopback_gain() */
        u16 loopback_gain[2];

        /* PHY lock for core.rev < 3
         * This lock is only used by bcm43xx_phy_{un}lock()
         */
        spinlock_t lock;

        /* Firmware. */
        const struct firmware *ucode;
        const struct firmware *pcm;
        const struct firmware *initvals0;
        const struct firmware *initvals1;
};


struct bcm43xx_radioinfo {
        u16 manufact;
        u16 version;
        u8 revision;

        /* Desired TX power in dBm Q5.2 */
        u16 txpower_desired;
        /* TX Power control values. */
        union {
                /* B/G PHY */
                struct {
                        u16 baseband_atten;
                        u16 radio_atten;
                        u16 txctl1;
                        u16 txctl2;
                };
                /* A PHY */
                struct {
                        u16 txpwr_offset;
                };
        };

        /* Current Interference Mitigation mode */
        int interfmode;
        /* Stack of saved values from the Interference Mitigation code.
         * Each value in the stack is layed out as follows:
         * bit 0-11:  offset
         * bit 12-15: register ID
         * bit 16-32: value
         * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
         */
#define BCM43xx_INTERFSTACK_SIZE        26
        u32 interfstack[BCM43xx_INTERFSTACK_SIZE];

        /* Saved values from the NRSSI Slope calculation */
        s16 nrssi[2];
        s32 nrssislope;
        /* In memory nrssi lookup table. */
        s8 nrssi_lt[64];

        /* current channel */
        u8 channel;
        u8 initial_channel;

        u16 lofcal;

        u16 initval;

        u8 enabled:1;
        /* ACI (adjacent channel interference) flags. */
        u8 aci_enable:1,
           aci_wlan_automatic:1,
           aci_hw_rssi:1;
};

/* Data structures for DMA transmission, per 80211 core. */
struct bcm43xx_dma {
        struct bcm43xx_dmaring *tx_ring0;
        struct bcm43xx_dmaring *tx_ring1;
        struct bcm43xx_dmaring *tx_ring2;
        struct bcm43xx_dmaring *tx_ring3;
        struct bcm43xx_dmaring *tx_ring4;
        struct bcm43xx_dmaring *tx_ring5;

        struct bcm43xx_dmaring *rx_ring0;
        struct bcm43xx_dmaring *rx_ring3; /* only available on core.rev < 5 */
};

/* Data structures for PIO transmission, per 80211 core. */
struct bcm43xx_pio {
        struct bcm43xx_pioqueue *queue0;
        struct bcm43xx_pioqueue *queue1;
        struct bcm43xx_pioqueue *queue2;
        struct bcm43xx_pioqueue *queue3;
};

#define BCM43xx_MAX_80211_CORES         2

#ifdef CONFIG_BCM947XX
#define core_offset(bcm) (bcm)->current_core_offset
#else
#define core_offset(bcm) 0
#endif

/* Generic information about a core. */
struct bcm43xx_coreinfo {
        u8 available:1,
           enabled:1,
           initialized:1;
        /** core_rev revision number */
        u8 rev;
        /** Index number for _switch_core() */
        u8 index;
        /** core_id ID number */
        u16 id;
        /** Core-specific data. */
        void *priv;
};

/* Additional information for each 80211 core. */
struct bcm43xx_coreinfo_80211 {
        /* PHY device. */
        struct bcm43xx_phyinfo phy;
        /* Radio device. */
        struct bcm43xx_radioinfo radio;
        union {
                /* DMA context. */
                struct bcm43xx_dma dma;
                /* PIO context. */
                struct bcm43xx_pio pio;
        };
};

/* Context information for a noise calculation (Link Quality). */
struct bcm43xx_noise_calculation {
        struct bcm43xx_coreinfo *core_at_start;
        u8 channel_at_start;
        u8 calculation_running:1;
        u8 nr_samples;
        s8 samples[8][4];
};

struct bcm43xx_stats {
        u8 noise;
        struct iw_statistics wstats;
        /* Store the last TX/RX times here for updating the leds. */
        unsigned long last_tx;
        unsigned long last_rx;
};

struct bcm43xx_key {
        u8 enabled:1;
        u8 algorithm;
};

/* Driver initialization status. */
enum {
        BCM43xx_STAT_UNINIT,            /* Uninitialized. */
        BCM43xx_STAT_INITIALIZING,      /* init_board() in progress. */
        BCM43xx_STAT_INITIALIZED,       /* Fully operational. */
        BCM43xx_STAT_SHUTTINGDOWN,      /* free_board() in progress. */
        BCM43xx_STAT_RESTARTING,        /* controller_restart() called. */
};
#define bcm43xx_status(bcm)             atomic_read(&(bcm)->init_status)
#define bcm43xx_set_status(bcm, stat)   do {                    \
                atomic_set(&(bcm)->init_status, (stat));        \
                smp_wmb();                                      \
                                        } while (0)

/*    *** THEORY OF LOCKING ***
 *
 * We have two different locks in the bcm43xx driver.
 * => bcm->mutex:    General sleeping mutex. Protects struct bcm43xx_private
 *                   and the device registers. This mutex does _not_ protect
 *                   against concurrency from the IRQ handler.
 * => bcm->irq_lock: IRQ spinlock. Protects against IRQ handler concurrency.
 *
 * Please note that, if you only take the irq_lock, you are not protected
 * against concurrency from the periodic work handlers.
 * Most times you want to take _both_ locks.
 */

struct bcm43xx_private {
        struct ieee80211_device *ieee;
        struct ieee80211softmac_device *softmac;

        struct net_device *net_dev;
        struct pci_dev *pci_dev;
        unsigned int irq;

        void __iomem *mmio_addr;

        spinlock_t irq_lock;
        struct mutex mutex;

        /* Driver initialization status BCM43xx_STAT_*** */
        atomic_t init_status;

        u16 was_initialized:1,          /* for PCI suspend/resume. */
            __using_pio:1,              /* Internal, use bcm43xx_using_pio(). */
            bad_frames_preempt:1,       /* Use "Bad Frames Preemption" (default off) */
            reg124_set_0x4:1,           /* Some variable to keep track of IRQ stuff. */
            short_preamble:1,           /* TRUE, if short preamble is enabled. */
            firmware_norelease:1,       /* Do not release the firmware. Used on suspend. */
            radio_hw_enable:1;          /* TRUE if radio is hardware enabled */

        struct bcm43xx_stats stats;

        /* Bus type we are connected to.
         * This is currently always BCM43xx_BUSTYPE_PCI
         */
        u8 bustype;
        u64 dma_mask;

        u16 board_vendor;
        u16 board_type;
        u16 board_revision;

        u16 chip_id;
        u8 chip_rev;
        u8 chip_package;

        struct bcm43xx_sprominfo sprom;
#define BCM43xx_NR_LEDS         4
        struct bcm43xx_led leds[BCM43xx_NR_LEDS];
        spinlock_t leds_lock;

        /* The currently active core. */
        struct bcm43xx_coreinfo *current_core;
#ifdef CONFIG_BCM947XX
        /** current core memory offset */
        u32 current_core_offset;
#endif
        struct bcm43xx_coreinfo *active_80211_core;
        /* coreinfo structs for all possible cores follow.
         * Note that a core might not exist.
         * So check the coreinfo flags before using it.
         */
        struct bcm43xx_coreinfo core_chipcommon;
        struct bcm43xx_coreinfo core_pci;
        struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ];
        /* Additional information, specific to the 80211 cores. */
        struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ];
        /* Number of available 80211 cores. */
        int nr_80211_available;

        u32 chipcommon_capabilities;

        /* Reason code of the last interrupt. */
        u32 irq_reason;
        u32 dma_reason[6];
        /* saved irq enable/disable state bitfield. */
        u32 irq_savedstate;
        /* Link Quality calculation context. */
        struct bcm43xx_noise_calculation noisecalc;
        /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
        int mac_suspended;

        /* Threshold values. */
        //TODO: The RTS thr has to be _used_. Currently, it is only set via WX.
        u32 rts_threshold;

        /* Interrupt Service Routine tasklet (bottom-half) */
        struct tasklet_struct isr_tasklet;

        /* Periodic tasks */
        struct delayed_work periodic_work;
        unsigned int periodic_state;

        struct work_struct restart_work;

        /* Informational stuff. */
        char nick[IW_ESSID_MAX_SIZE + 1];

        /* encryption/decryption */
        u16 security_offset;
        struct bcm43xx_key key[54];
        u8 default_key_idx;

        /* Random Number Generator. */
        struct hwrng rng;
        char rng_name[20 + 1];

        /* Debugging stuff follows. */
#ifdef CONFIG_BCM43XX_DEBUG
        struct bcm43xx_dfsentry *dfsentry;
#endif
};


static inline
struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
{
        return ieee80211softmac_priv(dev);
}

struct device;

static inline
struct bcm43xx_private * dev_to_bcm(struct device *dev)
{
        struct net_device *net_dev;
        struct bcm43xx_private *bcm;

        net_dev = dev_get_drvdata(dev);
        bcm = bcm43xx_priv(net_dev);

        return bcm;
}


/* Helper function, which returns a boolean.
 * TRUE, if PIO is used; FALSE, if DMA is used.
 */
#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
        return bcm->__using_pio;
}
#elif defined(CONFIG_BCM43XX_DMA)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
        return 0;
}
#elif defined(CONFIG_BCM43XX_PIO)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
        return 1;
}
#else
# error "Using neither DMA nor PIO? Confused..."
#endif

/* Helper functions to access data structures private to the 80211 cores.
 * Note that we _must_ have an 80211 core mapped when calling
 * any of these functions.
 */
static inline
struct bcm43xx_coreinfo_80211 *
bcm43xx_current_80211_priv(struct bcm43xx_private *bcm)
{
        assert(bcm->current_core->id == BCM43xx_COREID_80211);
        return bcm->current_core->priv;
}
static inline
struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm)
{
        assert(bcm43xx_using_pio(bcm));
        return &(bcm43xx_current_80211_priv(bcm)->pio);
}
static inline
struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm)
{
        assert(!bcm43xx_using_pio(bcm));
        return &(bcm43xx_current_80211_priv(bcm)->dma);
}
static inline
struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm)
{
        return &(bcm43xx_current_80211_priv(bcm)->phy);
}
static inline
struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm)
{
        return &(bcm43xx_current_80211_priv(bcm)->radio);
}


static inline
struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy,
                                           u16 radio_attenuation,
                                           u16 baseband_attenuation)
{
        return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2));
}


static inline
u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
{
        return ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
}

static inline
void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
{
        iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
}

static inline
u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
{
        return ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
}

static inline
void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
{
        iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
}

static inline
int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value)
{
        return pci_read_config_word(bcm->pci_dev, offset, value);
}

static inline
int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value)
{
        return pci_read_config_dword(bcm->pci_dev, offset, value);
}

static inline
int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value)
{
        return pci_write_config_word(bcm->pci_dev, offset, value);
}

static inline
int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value)
{
        return pci_write_config_dword(bcm->pci_dev, offset, value);
}

/** Limit a value between two limits */
#ifdef limit_value
# undef limit_value
#endif
#define limit_value(value, min, max)  \
        ({                                              \
                typeof(value) __value = (value);        \
                typeof(value) __min = (min);            \
                typeof(value) __max = (max);            \
                if (__value < __min)                    \
                        __value = __min;                \
                else if (__value > __max)               \
                        __value = __max;                \
                __value;                                \
        })

/** Helpers to print MAC addresses. */
#define BCM43xx_MACFMT          "%02x:%02x:%02x:%02x:%02x:%02x"
#define BCM43xx_MACARG(x)       ((u8*)(x))[0], ((u8*)(x))[1], \
                                ((u8*)(x))[2], ((u8*)(x))[3], \
                                ((u8*)(x))[4], ((u8*)(x))[5]

#endif /* BCM43xx_H_ */