kmemtrace: SLOB hooks.
[linux-2.6/kmemtrace.git] / drivers / net / myri_sbus.c
blob656a260fc956b1cf52912da2b3c8aa108d7154c9
1 /* myri_sbus.c: MyriCOM MyriNET SBUS card driver.
3 * Copyright (C) 1996, 1999, 2006 David S. Miller (davem@davemloft.net)
4 */
6 static char version[] =
7 "myri_sbus.c:v2.0 June 23, 2006 David S. Miller (davem@davemloft.net)\n";
9 #include <linux/module.h>
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/fcntl.h>
14 #include <linux/interrupt.h>
15 #include <linux/ioport.h>
16 #include <linux/in.h>
17 #include <linux/slab.h>
18 #include <linux/string.h>
19 #include <linux/delay.h>
20 #include <linux/init.h>
21 #include <linux/netdevice.h>
22 #include <linux/etherdevice.h>
23 #include <linux/skbuff.h>
24 #include <linux/bitops.h>
26 #include <net/dst.h>
27 #include <net/arp.h>
28 #include <net/sock.h>
29 #include <net/ipv6.h>
31 #include <asm/system.h>
32 #include <asm/io.h>
33 #include <asm/dma.h>
34 #include <asm/byteorder.h>
35 #include <asm/idprom.h>
36 #include <asm/sbus.h>
37 #include <asm/openprom.h>
38 #include <asm/oplib.h>
39 #include <asm/auxio.h>
40 #include <asm/pgtable.h>
41 #include <asm/irq.h>
43 #include "myri_sbus.h"
44 #include "myri_code.h"
46 /* #define DEBUG_DETECT */
47 /* #define DEBUG_IRQ */
48 /* #define DEBUG_TRANSMIT */
49 /* #define DEBUG_RECEIVE */
50 /* #define DEBUG_HEADER */
52 #ifdef DEBUG_DETECT
53 #define DET(x) printk x
54 #else
55 #define DET(x)
56 #endif
58 #ifdef DEBUG_IRQ
59 #define DIRQ(x) printk x
60 #else
61 #define DIRQ(x)
62 #endif
64 #ifdef DEBUG_TRANSMIT
65 #define DTX(x) printk x
66 #else
67 #define DTX(x)
68 #endif
70 #ifdef DEBUG_RECEIVE
71 #define DRX(x) printk x
72 #else
73 #define DRX(x)
74 #endif
76 #ifdef DEBUG_HEADER
77 #define DHDR(x) printk x
78 #else
79 #define DHDR(x)
80 #endif
82 static void myri_reset_off(void __iomem *lp, void __iomem *cregs)
84 /* Clear IRQ mask. */
85 sbus_writel(0, lp + LANAI_EIMASK);
87 /* Turn RESET function off. */
88 sbus_writel(CONTROL_ROFF, cregs + MYRICTRL_CTRL);
91 static void myri_reset_on(void __iomem *cregs)
93 /* Enable RESET function. */
94 sbus_writel(CONTROL_RON, cregs + MYRICTRL_CTRL);
96 /* Disable IRQ's. */
97 sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL);
100 static void myri_disable_irq(void __iomem *lp, void __iomem *cregs)
102 sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL);
103 sbus_writel(0, lp + LANAI_EIMASK);
104 sbus_writel(ISTAT_HOST, lp + LANAI_ISTAT);
107 static void myri_enable_irq(void __iomem *lp, void __iomem *cregs)
109 sbus_writel(CONTROL_EIRQ, cregs + MYRICTRL_CTRL);
110 sbus_writel(ISTAT_HOST, lp + LANAI_EIMASK);
113 static inline void bang_the_chip(struct myri_eth *mp)
115 struct myri_shmem __iomem *shmem = mp->shmem;
116 void __iomem *cregs = mp->cregs;
118 sbus_writel(1, &shmem->send);
119 sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL);
122 static int myri_do_handshake(struct myri_eth *mp)
124 struct myri_shmem __iomem *shmem = mp->shmem;
125 void __iomem *cregs = mp->cregs;
126 struct myri_channel __iomem *chan = &shmem->channel;
127 int tick = 0;
129 DET(("myri_do_handshake: "));
130 if (sbus_readl(&chan->state) == STATE_READY) {
131 DET(("Already STATE_READY, failed.\n"));
132 return -1; /* We're hosed... */
135 myri_disable_irq(mp->lregs, cregs);
137 while (tick++ < 25) {
138 u32 softstate;
140 /* Wake it up. */
141 DET(("shakedown, CONTROL_WON, "));
142 sbus_writel(1, &shmem->shakedown);
143 sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL);
145 softstate = sbus_readl(&chan->state);
146 DET(("chanstate[%08x] ", softstate));
147 if (softstate == STATE_READY) {
148 DET(("wakeup successful, "));
149 break;
152 if (softstate != STATE_WFN) {
153 DET(("not WFN setting that, "));
154 sbus_writel(STATE_WFN, &chan->state);
157 udelay(20);
160 myri_enable_irq(mp->lregs, cregs);
162 if (tick > 25) {
163 DET(("25 ticks we lose, failure.\n"));
164 return -1;
166 DET(("success\n"));
167 return 0;
170 static int __devinit myri_load_lanai(struct myri_eth *mp)
172 struct net_device *dev = mp->dev;
173 struct myri_shmem __iomem *shmem = mp->shmem;
174 void __iomem *rptr;
175 int i;
177 myri_disable_irq(mp->lregs, mp->cregs);
178 myri_reset_on(mp->cregs);
180 rptr = mp->lanai;
181 for (i = 0; i < mp->eeprom.ramsz; i++)
182 sbus_writeb(0, rptr + i);
184 if (mp->eeprom.cpuvers >= CPUVERS_3_0)
185 sbus_writel(mp->eeprom.cval, mp->lregs + LANAI_CVAL);
187 /* Load executable code. */
188 for (i = 0; i < sizeof(lanai4_code); i++)
189 sbus_writeb(lanai4_code[i], rptr + (lanai4_code_off * 2) + i);
191 /* Load data segment. */
192 for (i = 0; i < sizeof(lanai4_data); i++)
193 sbus_writeb(lanai4_data[i], rptr + (lanai4_data_off * 2) + i);
195 /* Set device address. */
196 sbus_writeb(0, &shmem->addr[0]);
197 sbus_writeb(0, &shmem->addr[1]);
198 for (i = 0; i < 6; i++)
199 sbus_writeb(dev->dev_addr[i],
200 &shmem->addr[i + 2]);
202 /* Set SBUS bursts and interrupt mask. */
203 sbus_writel(((mp->myri_bursts & 0xf8) >> 3), &shmem->burst);
204 sbus_writel(SHMEM_IMASK_RX, &shmem->imask);
206 /* Release the LANAI. */
207 myri_disable_irq(mp->lregs, mp->cregs);
208 myri_reset_off(mp->lregs, mp->cregs);
209 myri_disable_irq(mp->lregs, mp->cregs);
211 /* Wait for the reset to complete. */
212 for (i = 0; i < 5000; i++) {
213 if (sbus_readl(&shmem->channel.state) != STATE_READY)
214 break;
215 else
216 udelay(10);
219 if (i == 5000)
220 printk(KERN_ERR "myricom: Chip would not reset after firmware load.\n");
222 i = myri_do_handshake(mp);
223 if (i)
224 printk(KERN_ERR "myricom: Handshake with LANAI failed.\n");
226 if (mp->eeprom.cpuvers == CPUVERS_4_0)
227 sbus_writel(0, mp->lregs + LANAI_VERS);
229 return i;
232 static void myri_clean_rings(struct myri_eth *mp)
234 struct sendq __iomem *sq = mp->sq;
235 struct recvq __iomem *rq = mp->rq;
236 int i;
238 sbus_writel(0, &rq->tail);
239 sbus_writel(0, &rq->head);
240 for (i = 0; i < (RX_RING_SIZE+1); i++) {
241 if (mp->rx_skbs[i] != NULL) {
242 struct myri_rxd __iomem *rxd = &rq->myri_rxd[i];
243 u32 dma_addr;
245 dma_addr = sbus_readl(&rxd->myri_scatters[0].addr);
246 sbus_unmap_single(mp->myri_sdev, dma_addr, RX_ALLOC_SIZE, SBUS_DMA_FROMDEVICE);
247 dev_kfree_skb(mp->rx_skbs[i]);
248 mp->rx_skbs[i] = NULL;
252 mp->tx_old = 0;
253 sbus_writel(0, &sq->tail);
254 sbus_writel(0, &sq->head);
255 for (i = 0; i < TX_RING_SIZE; i++) {
256 if (mp->tx_skbs[i] != NULL) {
257 struct sk_buff *skb = mp->tx_skbs[i];
258 struct myri_txd __iomem *txd = &sq->myri_txd[i];
259 u32 dma_addr;
261 dma_addr = sbus_readl(&txd->myri_gathers[0].addr);
262 sbus_unmap_single(mp->myri_sdev, dma_addr, (skb->len + 3) & ~3, SBUS_DMA_TODEVICE);
263 dev_kfree_skb(mp->tx_skbs[i]);
264 mp->tx_skbs[i] = NULL;
269 static void myri_init_rings(struct myri_eth *mp, int from_irq)
271 struct recvq __iomem *rq = mp->rq;
272 struct myri_rxd __iomem *rxd = &rq->myri_rxd[0];
273 struct net_device *dev = mp->dev;
274 gfp_t gfp_flags = GFP_KERNEL;
275 int i;
277 if (from_irq || in_interrupt())
278 gfp_flags = GFP_ATOMIC;
280 myri_clean_rings(mp);
281 for (i = 0; i < RX_RING_SIZE; i++) {
282 struct sk_buff *skb = myri_alloc_skb(RX_ALLOC_SIZE, gfp_flags);
283 u32 dma_addr;
285 if (!skb)
286 continue;
287 mp->rx_skbs[i] = skb;
288 skb->dev = dev;
289 skb_put(skb, RX_ALLOC_SIZE);
291 dma_addr = sbus_map_single(mp->myri_sdev, skb->data, RX_ALLOC_SIZE, SBUS_DMA_FROMDEVICE);
292 sbus_writel(dma_addr, &rxd[i].myri_scatters[0].addr);
293 sbus_writel(RX_ALLOC_SIZE, &rxd[i].myri_scatters[0].len);
294 sbus_writel(i, &rxd[i].ctx);
295 sbus_writel(1, &rxd[i].num_sg);
297 sbus_writel(0, &rq->head);
298 sbus_writel(RX_RING_SIZE, &rq->tail);
301 static int myri_init(struct myri_eth *mp, int from_irq)
303 myri_init_rings(mp, from_irq);
304 return 0;
307 static void myri_is_not_so_happy(struct myri_eth *mp)
311 #ifdef DEBUG_HEADER
312 static void dump_ehdr(struct ethhdr *ehdr)
314 DECLARE_MAC_BUF(mac);
315 DECLARE_MAC_BUF(mac2);
316 printk("ehdr[h_dst(%s)"
317 "h_source(%s)"
318 "h_proto(%04x)]\n",
319 print_mac(mac, ehdr->h_dest), print_mac(mac2, ehdr->h_source),
320 ehdr->h_proto);
323 static void dump_ehdr_and_myripad(unsigned char *stuff)
325 struct ethhdr *ehdr = (struct ethhdr *) (stuff + 2);
327 printk("pad[%02x:%02x]", stuff[0], stuff[1]);
328 dump_ehdr(ehdr);
330 #endif
332 static void myri_tx(struct myri_eth *mp, struct net_device *dev)
334 struct sendq __iomem *sq= mp->sq;
335 int entry = mp->tx_old;
336 int limit = sbus_readl(&sq->head);
338 DTX(("entry[%d] limit[%d] ", entry, limit));
339 if (entry == limit)
340 return;
341 while (entry != limit) {
342 struct sk_buff *skb = mp->tx_skbs[entry];
343 u32 dma_addr;
345 DTX(("SKB[%d] ", entry));
346 dma_addr = sbus_readl(&sq->myri_txd[entry].myri_gathers[0].addr);
347 sbus_unmap_single(mp->myri_sdev, dma_addr, skb->len, SBUS_DMA_TODEVICE);
348 dev_kfree_skb(skb);
349 mp->tx_skbs[entry] = NULL;
350 dev->stats.tx_packets++;
351 entry = NEXT_TX(entry);
353 mp->tx_old = entry;
356 /* Determine the packet's protocol ID. The rule here is that we
357 * assume 802.3 if the type field is short enough to be a length.
358 * This is normal practice and works for any 'now in use' protocol.
360 static __be16 myri_type_trans(struct sk_buff *skb, struct net_device *dev)
362 struct ethhdr *eth;
363 unsigned char *rawp;
365 skb_set_mac_header(skb, MYRI_PAD_LEN);
366 skb_pull(skb, dev->hard_header_len);
367 eth = eth_hdr(skb);
369 #ifdef DEBUG_HEADER
370 DHDR(("myri_type_trans: "));
371 dump_ehdr(eth);
372 #endif
373 if (*eth->h_dest & 1) {
374 if (memcmp(eth->h_dest, dev->broadcast, ETH_ALEN)==0)
375 skb->pkt_type = PACKET_BROADCAST;
376 else
377 skb->pkt_type = PACKET_MULTICAST;
378 } else if (dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
379 if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN))
380 skb->pkt_type = PACKET_OTHERHOST;
383 if (ntohs(eth->h_proto) >= 1536)
384 return eth->h_proto;
386 rawp = skb->data;
388 /* This is a magic hack to spot IPX packets. Older Novell breaks
389 * the protocol design and runs IPX over 802.3 without an 802.2 LLC
390 * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
391 * won't work for fault tolerant netware but does for the rest.
393 if (*(unsigned short *)rawp == 0xFFFF)
394 return htons(ETH_P_802_3);
396 /* Real 802.2 LLC */
397 return htons(ETH_P_802_2);
400 static void myri_rx(struct myri_eth *mp, struct net_device *dev)
402 struct recvq __iomem *rq = mp->rq;
403 struct recvq __iomem *rqa = mp->rqack;
404 int entry = sbus_readl(&rqa->head);
405 int limit = sbus_readl(&rqa->tail);
406 int drops;
408 DRX(("entry[%d] limit[%d] ", entry, limit));
409 if (entry == limit)
410 return;
411 drops = 0;
412 DRX(("\n"));
413 while (entry != limit) {
414 struct myri_rxd __iomem *rxdack = &rqa->myri_rxd[entry];
415 u32 csum = sbus_readl(&rxdack->csum);
416 int len = sbus_readl(&rxdack->myri_scatters[0].len);
417 int index = sbus_readl(&rxdack->ctx);
418 struct myri_rxd __iomem *rxd = &rq->myri_rxd[sbus_readl(&rq->tail)];
419 struct sk_buff *skb = mp->rx_skbs[index];
421 /* Ack it. */
422 sbus_writel(NEXT_RX(entry), &rqa->head);
424 /* Check for errors. */
425 DRX(("rxd[%d]: %p len[%d] csum[%08x] ", entry, rxd, len, csum));
426 sbus_dma_sync_single_for_cpu(mp->myri_sdev,
427 sbus_readl(&rxd->myri_scatters[0].addr),
428 RX_ALLOC_SIZE, SBUS_DMA_FROMDEVICE);
429 if (len < (ETH_HLEN + MYRI_PAD_LEN) || (skb->data[0] != MYRI_PAD_LEN)) {
430 DRX(("ERROR["));
431 dev->stats.rx_errors++;
432 if (len < (ETH_HLEN + MYRI_PAD_LEN)) {
433 DRX(("BAD_LENGTH] "));
434 dev->stats.rx_length_errors++;
435 } else {
436 DRX(("NO_PADDING] "));
437 dev->stats.rx_frame_errors++;
440 /* Return it to the LANAI. */
441 drop_it:
442 drops++;
443 DRX(("DROP "));
444 dev->stats.rx_dropped++;
445 sbus_dma_sync_single_for_device(mp->myri_sdev,
446 sbus_readl(&rxd->myri_scatters[0].addr),
447 RX_ALLOC_SIZE,
448 SBUS_DMA_FROMDEVICE);
449 sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
450 sbus_writel(index, &rxd->ctx);
451 sbus_writel(1, &rxd->num_sg);
452 sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
453 goto next;
456 DRX(("len[%d] ", len));
457 if (len > RX_COPY_THRESHOLD) {
458 struct sk_buff *new_skb;
459 u32 dma_addr;
461 DRX(("BIGBUFF "));
462 new_skb = myri_alloc_skb(RX_ALLOC_SIZE, GFP_ATOMIC);
463 if (new_skb == NULL) {
464 DRX(("skb_alloc(FAILED) "));
465 goto drop_it;
467 sbus_unmap_single(mp->myri_sdev,
468 sbus_readl(&rxd->myri_scatters[0].addr),
469 RX_ALLOC_SIZE,
470 SBUS_DMA_FROMDEVICE);
471 mp->rx_skbs[index] = new_skb;
472 new_skb->dev = dev;
473 skb_put(new_skb, RX_ALLOC_SIZE);
474 dma_addr = sbus_map_single(mp->myri_sdev,
475 new_skb->data,
476 RX_ALLOC_SIZE,
477 SBUS_DMA_FROMDEVICE);
478 sbus_writel(dma_addr, &rxd->myri_scatters[0].addr);
479 sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
480 sbus_writel(index, &rxd->ctx);
481 sbus_writel(1, &rxd->num_sg);
482 sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
484 /* Trim the original skb for the netif. */
485 DRX(("trim(%d) ", len));
486 skb_trim(skb, len);
487 } else {
488 struct sk_buff *copy_skb = dev_alloc_skb(len);
490 DRX(("SMALLBUFF "));
491 if (copy_skb == NULL) {
492 DRX(("dev_alloc_skb(FAILED) "));
493 goto drop_it;
495 /* DMA sync already done above. */
496 copy_skb->dev = dev;
497 DRX(("resv_and_put "));
498 skb_put(copy_skb, len);
499 skb_copy_from_linear_data(skb, copy_skb->data, len);
501 /* Reuse original ring buffer. */
502 DRX(("reuse "));
503 sbus_dma_sync_single_for_device(mp->myri_sdev,
504 sbus_readl(&rxd->myri_scatters[0].addr),
505 RX_ALLOC_SIZE,
506 SBUS_DMA_FROMDEVICE);
507 sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
508 sbus_writel(index, &rxd->ctx);
509 sbus_writel(1, &rxd->num_sg);
510 sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
512 skb = copy_skb;
515 /* Just like the happy meal we get checksums from this card. */
516 skb->csum = csum;
517 skb->ip_summed = CHECKSUM_UNNECESSARY; /* XXX */
519 skb->protocol = myri_type_trans(skb, dev);
520 DRX(("prot[%04x] netif_rx ", skb->protocol));
521 netif_rx(skb);
523 dev->last_rx = jiffies;
524 dev->stats.rx_packets++;
525 dev->stats.rx_bytes += len;
526 next:
527 DRX(("NEXT\n"));
528 entry = NEXT_RX(entry);
532 static irqreturn_t myri_interrupt(int irq, void *dev_id)
534 struct net_device *dev = (struct net_device *) dev_id;
535 struct myri_eth *mp = (struct myri_eth *) dev->priv;
536 void __iomem *lregs = mp->lregs;
537 struct myri_channel __iomem *chan = &mp->shmem->channel;
538 unsigned long flags;
539 u32 status;
540 int handled = 0;
542 spin_lock_irqsave(&mp->irq_lock, flags);
544 status = sbus_readl(lregs + LANAI_ISTAT);
545 DIRQ(("myri_interrupt: status[%08x] ", status));
546 if (status & ISTAT_HOST) {
547 u32 softstate;
549 handled = 1;
550 DIRQ(("IRQ_DISAB "));
551 myri_disable_irq(lregs, mp->cregs);
552 softstate = sbus_readl(&chan->state);
553 DIRQ(("state[%08x] ", softstate));
554 if (softstate != STATE_READY) {
555 DIRQ(("myri_not_so_happy "));
556 myri_is_not_so_happy(mp);
558 DIRQ(("\nmyri_rx: "));
559 myri_rx(mp, dev);
560 DIRQ(("\nistat=ISTAT_HOST "));
561 sbus_writel(ISTAT_HOST, lregs + LANAI_ISTAT);
562 DIRQ(("IRQ_ENAB "));
563 myri_enable_irq(lregs, mp->cregs);
565 DIRQ(("\n"));
567 spin_unlock_irqrestore(&mp->irq_lock, flags);
569 return IRQ_RETVAL(handled);
572 static int myri_open(struct net_device *dev)
574 struct myri_eth *mp = (struct myri_eth *) dev->priv;
576 return myri_init(mp, in_interrupt());
579 static int myri_close(struct net_device *dev)
581 struct myri_eth *mp = (struct myri_eth *) dev->priv;
583 myri_clean_rings(mp);
584 return 0;
587 static void myri_tx_timeout(struct net_device *dev)
589 struct myri_eth *mp = (struct myri_eth *) dev->priv;
591 printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
593 dev->stats.tx_errors++;
594 myri_init(mp, 0);
595 netif_wake_queue(dev);
598 static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev)
600 struct myri_eth *mp = (struct myri_eth *) dev->priv;
601 struct sendq __iomem *sq = mp->sq;
602 struct myri_txd __iomem *txd;
603 unsigned long flags;
604 unsigned int head, tail;
605 int len, entry;
606 u32 dma_addr;
608 DTX(("myri_start_xmit: "));
610 myri_tx(mp, dev);
612 netif_stop_queue(dev);
614 /* This is just to prevent multiple PIO reads for TX_BUFFS_AVAIL. */
615 head = sbus_readl(&sq->head);
616 tail = sbus_readl(&sq->tail);
618 if (!TX_BUFFS_AVAIL(head, tail)) {
619 DTX(("no buffs available, returning 1\n"));
620 return 1;
623 spin_lock_irqsave(&mp->irq_lock, flags);
625 DHDR(("xmit[skbdata(%p)]\n", skb->data));
626 #ifdef DEBUG_HEADER
627 dump_ehdr_and_myripad(((unsigned char *) skb->data));
628 #endif
630 /* XXX Maybe this can go as well. */
631 len = skb->len;
632 if (len & 3) {
633 DTX(("len&3 "));
634 len = (len + 4) & (~3);
637 entry = sbus_readl(&sq->tail);
639 txd = &sq->myri_txd[entry];
640 mp->tx_skbs[entry] = skb;
642 /* Must do this before we sbus map it. */
643 if (skb->data[MYRI_PAD_LEN] & 0x1) {
644 sbus_writew(0xffff, &txd->addr[0]);
645 sbus_writew(0xffff, &txd->addr[1]);
646 sbus_writew(0xffff, &txd->addr[2]);
647 sbus_writew(0xffff, &txd->addr[3]);
648 } else {
649 sbus_writew(0xffff, &txd->addr[0]);
650 sbus_writew((skb->data[0] << 8) | skb->data[1], &txd->addr[1]);
651 sbus_writew((skb->data[2] << 8) | skb->data[3], &txd->addr[2]);
652 sbus_writew((skb->data[4] << 8) | skb->data[5], &txd->addr[3]);
655 dma_addr = sbus_map_single(mp->myri_sdev, skb->data, len, SBUS_DMA_TODEVICE);
656 sbus_writel(dma_addr, &txd->myri_gathers[0].addr);
657 sbus_writel(len, &txd->myri_gathers[0].len);
658 sbus_writel(1, &txd->num_sg);
659 sbus_writel(KERNEL_CHANNEL, &txd->chan);
660 sbus_writel(len, &txd->len);
661 sbus_writel((u32)-1, &txd->csum_off);
662 sbus_writel(0, &txd->csum_field);
664 sbus_writel(NEXT_TX(entry), &sq->tail);
665 DTX(("BangTheChip "));
666 bang_the_chip(mp);
668 DTX(("tbusy=0, returning 0\n"));
669 netif_start_queue(dev);
670 spin_unlock_irqrestore(&mp->irq_lock, flags);
671 return 0;
674 /* Create the MyriNet MAC header for an arbitrary protocol layer
676 * saddr=NULL means use device source address
677 * daddr=NULL means leave destination address (eg unresolved arp)
679 static int myri_header(struct sk_buff *skb, struct net_device *dev,
680 unsigned short type, const void *daddr,
681 const void *saddr, unsigned len)
683 struct ethhdr *eth = (struct ethhdr *) skb_push(skb, ETH_HLEN);
684 unsigned char *pad = (unsigned char *) skb_push(skb, MYRI_PAD_LEN);
686 #ifdef DEBUG_HEADER
687 DHDR(("myri_header: pad[%02x,%02x] ", pad[0], pad[1]));
688 dump_ehdr(eth);
689 #endif
691 /* Set the MyriNET padding identifier. */
692 pad[0] = MYRI_PAD_LEN;
693 pad[1] = 0xab;
695 /* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
696 * in here instead. It is up to the 802.2 layer to carry protocol information.
698 if (type != ETH_P_802_3)
699 eth->h_proto = htons(type);
700 else
701 eth->h_proto = htons(len);
703 /* Set the source hardware address. */
704 if (saddr)
705 memcpy(eth->h_source, saddr, dev->addr_len);
706 else
707 memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
709 /* Anyway, the loopback-device should never use this function... */
710 if (dev->flags & IFF_LOOPBACK) {
711 int i;
712 for (i = 0; i < dev->addr_len; i++)
713 eth->h_dest[i] = 0;
714 return(dev->hard_header_len);
717 if (daddr) {
718 memcpy(eth->h_dest, daddr, dev->addr_len);
719 return dev->hard_header_len;
721 return -dev->hard_header_len;
724 /* Rebuild the MyriNet MAC header. This is called after an ARP
725 * (or in future other address resolution) has completed on this
726 * sk_buff. We now let ARP fill in the other fields.
728 static int myri_rebuild_header(struct sk_buff *skb)
730 unsigned char *pad = (unsigned char *) skb->data;
731 struct ethhdr *eth = (struct ethhdr *) (pad + MYRI_PAD_LEN);
732 struct net_device *dev = skb->dev;
734 #ifdef DEBUG_HEADER
735 DHDR(("myri_rebuild_header: pad[%02x,%02x] ", pad[0], pad[1]));
736 dump_ehdr(eth);
737 #endif
739 /* Refill MyriNet padding identifiers, this is just being anal. */
740 pad[0] = MYRI_PAD_LEN;
741 pad[1] = 0xab;
743 switch (eth->h_proto)
745 #ifdef CONFIG_INET
746 case __constant_htons(ETH_P_IP):
747 return arp_find(eth->h_dest, skb);
748 #endif
750 default:
751 printk(KERN_DEBUG
752 "%s: unable to resolve type %X addresses.\n",
753 dev->name, (int)eth->h_proto);
755 memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
756 return 0;
757 break;
760 return 0;
763 static int myri_header_cache(const struct neighbour *neigh, struct hh_cache *hh)
765 unsigned short type = hh->hh_type;
766 unsigned char *pad;
767 struct ethhdr *eth;
768 const struct net_device *dev = neigh->dev;
770 pad = ((unsigned char *) hh->hh_data) +
771 HH_DATA_OFF(sizeof(*eth) + MYRI_PAD_LEN);
772 eth = (struct ethhdr *) (pad + MYRI_PAD_LEN);
774 if (type == htons(ETH_P_802_3))
775 return -1;
777 /* Refill MyriNet padding identifiers, this is just being anal. */
778 pad[0] = MYRI_PAD_LEN;
779 pad[1] = 0xab;
781 eth->h_proto = type;
782 memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
783 memcpy(eth->h_dest, neigh->ha, dev->addr_len);
784 hh->hh_len = 16;
785 return 0;
789 /* Called by Address Resolution module to notify changes in address. */
790 void myri_header_cache_update(struct hh_cache *hh,
791 const struct net_device *dev,
792 const unsigned char * haddr)
794 memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
795 haddr, dev->addr_len);
798 static int myri_change_mtu(struct net_device *dev, int new_mtu)
800 if ((new_mtu < (ETH_HLEN + MYRI_PAD_LEN)) || (new_mtu > MYRINET_MTU))
801 return -EINVAL;
802 dev->mtu = new_mtu;
803 return 0;
806 static void myri_set_multicast(struct net_device *dev)
808 /* Do nothing, all MyriCOM nodes transmit multicast frames
809 * as broadcast packets...
813 static inline void set_boardid_from_idprom(struct myri_eth *mp, int num)
815 mp->eeprom.id[0] = 0;
816 mp->eeprom.id[1] = idprom->id_machtype;
817 mp->eeprom.id[2] = (idprom->id_sernum >> 16) & 0xff;
818 mp->eeprom.id[3] = (idprom->id_sernum >> 8) & 0xff;
819 mp->eeprom.id[4] = (idprom->id_sernum >> 0) & 0xff;
820 mp->eeprom.id[5] = num;
823 static inline void determine_reg_space_size(struct myri_eth *mp)
825 switch(mp->eeprom.cpuvers) {
826 case CPUVERS_2_3:
827 case CPUVERS_3_0:
828 case CPUVERS_3_1:
829 case CPUVERS_3_2:
830 mp->reg_size = (3 * 128 * 1024) + 4096;
831 break;
833 case CPUVERS_4_0:
834 case CPUVERS_4_1:
835 mp->reg_size = ((4096<<1) + mp->eeprom.ramsz);
836 break;
838 case CPUVERS_4_2:
839 case CPUVERS_5_0:
840 default:
841 printk("myricom: AIEEE weird cpu version %04x assuming pre4.0\n",
842 mp->eeprom.cpuvers);
843 mp->reg_size = (3 * 128 * 1024) + 4096;
847 #ifdef DEBUG_DETECT
848 static void dump_eeprom(struct myri_eth *mp)
850 printk("EEPROM: clockval[%08x] cpuvers[%04x] "
851 "id[%02x,%02x,%02x,%02x,%02x,%02x]\n",
852 mp->eeprom.cval, mp->eeprom.cpuvers,
853 mp->eeprom.id[0], mp->eeprom.id[1], mp->eeprom.id[2],
854 mp->eeprom.id[3], mp->eeprom.id[4], mp->eeprom.id[5]);
855 printk("EEPROM: ramsz[%08x]\n", mp->eeprom.ramsz);
856 printk("EEPROM: fvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
857 mp->eeprom.fvers[0], mp->eeprom.fvers[1], mp->eeprom.fvers[2],
858 mp->eeprom.fvers[3], mp->eeprom.fvers[4], mp->eeprom.fvers[5],
859 mp->eeprom.fvers[6], mp->eeprom.fvers[7]);
860 printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
861 mp->eeprom.fvers[8], mp->eeprom.fvers[9], mp->eeprom.fvers[10],
862 mp->eeprom.fvers[11], mp->eeprom.fvers[12], mp->eeprom.fvers[13],
863 mp->eeprom.fvers[14], mp->eeprom.fvers[15]);
864 printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
865 mp->eeprom.fvers[16], mp->eeprom.fvers[17], mp->eeprom.fvers[18],
866 mp->eeprom.fvers[19], mp->eeprom.fvers[20], mp->eeprom.fvers[21],
867 mp->eeprom.fvers[22], mp->eeprom.fvers[23]);
868 printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n",
869 mp->eeprom.fvers[24], mp->eeprom.fvers[25], mp->eeprom.fvers[26],
870 mp->eeprom.fvers[27], mp->eeprom.fvers[28], mp->eeprom.fvers[29],
871 mp->eeprom.fvers[30], mp->eeprom.fvers[31]);
872 printk("EEPROM: mvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
873 mp->eeprom.mvers[0], mp->eeprom.mvers[1], mp->eeprom.mvers[2],
874 mp->eeprom.mvers[3], mp->eeprom.mvers[4], mp->eeprom.mvers[5],
875 mp->eeprom.mvers[6], mp->eeprom.mvers[7]);
876 printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n",
877 mp->eeprom.mvers[8], mp->eeprom.mvers[9], mp->eeprom.mvers[10],
878 mp->eeprom.mvers[11], mp->eeprom.mvers[12], mp->eeprom.mvers[13],
879 mp->eeprom.mvers[14], mp->eeprom.mvers[15]);
880 printk("EEPROM: dlval[%04x] brd_type[%04x] bus_type[%04x] prod_code[%04x]\n",
881 mp->eeprom.dlval, mp->eeprom.brd_type, mp->eeprom.bus_type,
882 mp->eeprom.prod_code);
883 printk("EEPROM: serial_num[%08x]\n", mp->eeprom.serial_num);
885 #endif
887 static const struct header_ops myri_header_ops = {
888 .create = myri_header,
889 .rebuild = myri_rebuild_header,
890 .cache = myri_header_cache,
891 .cache_update = myri_header_cache_update,
894 static int __devinit myri_ether_init(struct sbus_dev *sdev)
896 static int num;
897 static unsigned version_printed;
898 struct net_device *dev;
899 struct myri_eth *mp;
900 unsigned char prop_buf[32];
901 int i;
902 DECLARE_MAC_BUF(mac);
904 DET(("myri_ether_init(%p,%d):\n", sdev, num));
905 dev = alloc_etherdev(sizeof(struct myri_eth));
907 if (!dev)
908 return -ENOMEM;
910 if (version_printed++ == 0)
911 printk(version);
913 SET_NETDEV_DEV(dev, &sdev->ofdev.dev);
915 mp = (struct myri_eth *) dev->priv;
916 spin_lock_init(&mp->irq_lock);
917 mp->myri_sdev = sdev;
919 /* Clean out skb arrays. */
920 for (i = 0; i < (RX_RING_SIZE + 1); i++)
921 mp->rx_skbs[i] = NULL;
923 for (i = 0; i < TX_RING_SIZE; i++)
924 mp->tx_skbs[i] = NULL;
926 /* First check for EEPROM information. */
927 i = prom_getproperty(sdev->prom_node, "myrinet-eeprom-info",
928 (char *)&mp->eeprom, sizeof(struct myri_eeprom));
929 DET(("prom_getprop(myrinet-eeprom-info) returns %d\n", i));
930 if (i == 0 || i == -1) {
931 /* No eeprom property, must cook up the values ourselves. */
932 DET(("No EEPROM: "));
933 mp->eeprom.bus_type = BUS_TYPE_SBUS;
934 mp->eeprom.cpuvers = prom_getintdefault(sdev->prom_node,"cpu_version",0);
935 mp->eeprom.cval = prom_getintdefault(sdev->prom_node,"clock_value",0);
936 mp->eeprom.ramsz = prom_getintdefault(sdev->prom_node,"sram_size",0);
937 DET(("cpuvers[%d] cval[%d] ramsz[%d]\n", mp->eeprom.cpuvers,
938 mp->eeprom.cval, mp->eeprom.ramsz));
939 if (mp->eeprom.cpuvers == 0) {
940 DET(("EEPROM: cpuvers was zero, setting to %04x\n",CPUVERS_2_3));
941 mp->eeprom.cpuvers = CPUVERS_2_3;
943 if (mp->eeprom.cpuvers < CPUVERS_3_0) {
944 DET(("EEPROM: cpuvers < CPUVERS_3_0, clockval set to zero.\n"));
945 mp->eeprom.cval = 0;
947 if (mp->eeprom.ramsz == 0) {
948 DET(("EEPROM: ramsz == 0, setting to 128k\n"));
949 mp->eeprom.ramsz = (128 * 1024);
951 i = prom_getproperty(sdev->prom_node, "myrinet-board-id",
952 &prop_buf[0], 10);
953 DET(("EEPROM: prom_getprop(myrinet-board-id) returns %d\n", i));
954 if ((i != 0) && (i != -1))
955 memcpy(&mp->eeprom.id[0], &prop_buf[0], 6);
956 else
957 set_boardid_from_idprom(mp, num);
958 i = prom_getproperty(sdev->prom_node, "fpga_version",
959 &mp->eeprom.fvers[0], 32);
960 DET(("EEPROM: prom_getprop(fpga_version) returns %d\n", i));
961 if (i == 0 || i == -1)
962 memset(&mp->eeprom.fvers[0], 0, 32);
964 if (mp->eeprom.cpuvers == CPUVERS_4_1) {
965 DET(("EEPROM: cpuvers CPUVERS_4_1, "));
966 if (mp->eeprom.ramsz == (128 * 1024)) {
967 DET(("ramsize 128k, setting to 256k, "));
968 mp->eeprom.ramsz = (256 * 1024);
970 if ((mp->eeprom.cval==0x40414041)||(mp->eeprom.cval==0x90449044)){
971 DET(("changing cval from %08x to %08x ",
972 mp->eeprom.cval, 0x50e450e4));
973 mp->eeprom.cval = 0x50e450e4;
975 DET(("\n"));
978 #ifdef DEBUG_DETECT
979 dump_eeprom(mp);
980 #endif
982 for (i = 0; i < 6; i++)
983 dev->dev_addr[i] = mp->eeprom.id[i];
985 determine_reg_space_size(mp);
987 /* Map in the MyriCOM register/localram set. */
988 if (mp->eeprom.cpuvers < CPUVERS_4_0) {
989 /* XXX Makes no sense, if control reg is non-existant this
990 * XXX driver cannot function at all... maybe pre-4.0 is
991 * XXX only a valid version for PCI cards? Ask feldy...
993 DET(("Mapping regs for cpuvers < CPUVERS_4_0\n"));
994 mp->regs = sbus_ioremap(&sdev->resource[0], 0,
995 mp->reg_size, "MyriCOM Regs");
996 if (!mp->regs) {
997 printk("MyriCOM: Cannot map MyriCOM registers.\n");
998 goto err;
1000 mp->lanai = mp->regs + (256 * 1024);
1001 mp->lregs = mp->lanai + (0x10000 * 2);
1002 } else {
1003 DET(("Mapping regs for cpuvers >= CPUVERS_4_0\n"));
1004 mp->cregs = sbus_ioremap(&sdev->resource[0], 0,
1005 PAGE_SIZE, "MyriCOM Control Regs");
1006 mp->lregs = sbus_ioremap(&sdev->resource[0], (256 * 1024),
1007 PAGE_SIZE, "MyriCOM LANAI Regs");
1008 mp->lanai =
1009 sbus_ioremap(&sdev->resource[0], (512 * 1024),
1010 mp->eeprom.ramsz, "MyriCOM SRAM");
1012 DET(("Registers mapped: cregs[%p] lregs[%p] lanai[%p]\n",
1013 mp->cregs, mp->lregs, mp->lanai));
1015 if (mp->eeprom.cpuvers >= CPUVERS_4_0)
1016 mp->shmem_base = 0xf000;
1017 else
1018 mp->shmem_base = 0x8000;
1020 DET(("Shared memory base is %04x, ", mp->shmem_base));
1022 mp->shmem = (struct myri_shmem __iomem *)
1023 (mp->lanai + (mp->shmem_base * 2));
1024 DET(("shmem mapped at %p\n", mp->shmem));
1026 mp->rqack = &mp->shmem->channel.recvqa;
1027 mp->rq = &mp->shmem->channel.recvq;
1028 mp->sq = &mp->shmem->channel.sendq;
1030 /* Reset the board. */
1031 DET(("Resetting LANAI\n"));
1032 myri_reset_off(mp->lregs, mp->cregs);
1033 myri_reset_on(mp->cregs);
1035 /* Turn IRQ's off. */
1036 myri_disable_irq(mp->lregs, mp->cregs);
1038 /* Reset once more. */
1039 myri_reset_on(mp->cregs);
1041 /* Get the supported DVMA burst sizes from our SBUS. */
1042 mp->myri_bursts = prom_getintdefault(mp->myri_sdev->bus->prom_node,
1043 "burst-sizes", 0x00);
1045 if (!sbus_can_burst64(sdev))
1046 mp->myri_bursts &= ~(DMA_BURST64);
1048 DET(("MYRI bursts %02x\n", mp->myri_bursts));
1050 /* Encode SBUS interrupt level in second control register. */
1051 i = prom_getint(sdev->prom_node, "interrupts");
1052 if (i == 0)
1053 i = 4;
1054 DET(("prom_getint(interrupts)==%d, irqlvl set to %04x\n",
1055 i, (1 << i)));
1057 sbus_writel((1 << i), mp->cregs + MYRICTRL_IRQLVL);
1059 mp->dev = dev;
1060 dev->open = &myri_open;
1061 dev->stop = &myri_close;
1062 dev->hard_start_xmit = &myri_start_xmit;
1063 dev->tx_timeout = &myri_tx_timeout;
1064 dev->watchdog_timeo = 5*HZ;
1065 dev->set_multicast_list = &myri_set_multicast;
1066 dev->irq = sdev->irqs[0];
1068 /* Register interrupt handler now. */
1069 DET(("Requesting MYRIcom IRQ line.\n"));
1070 if (request_irq(dev->irq, &myri_interrupt,
1071 IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
1072 printk("MyriCOM: Cannot register interrupt handler.\n");
1073 goto err;
1076 dev->mtu = MYRINET_MTU;
1077 dev->change_mtu = myri_change_mtu;
1078 dev->header_ops = &myri_header_ops;
1080 dev->hard_header_len = (ETH_HLEN + MYRI_PAD_LEN);
1082 /* Load code onto the LANai. */
1083 DET(("Loading LANAI firmware\n"));
1084 myri_load_lanai(mp);
1086 if (register_netdev(dev)) {
1087 printk("MyriCOM: Cannot register device.\n");
1088 goto err_free_irq;
1091 dev_set_drvdata(&sdev->ofdev.dev, mp);
1093 num++;
1095 printk("%s: MyriCOM MyriNET Ethernet %s\n",
1096 dev->name, print_mac(mac, dev->dev_addr));
1098 return 0;
1100 err_free_irq:
1101 free_irq(dev->irq, dev);
1102 err:
1103 /* This will also free the co-allocated 'dev->priv' */
1104 free_netdev(dev);
1105 return -ENODEV;
1109 static int __devinit myri_sbus_probe(struct of_device *dev, const struct of_device_id *match)
1111 struct sbus_dev *sdev = to_sbus_device(&dev->dev);
1113 return myri_ether_init(sdev);
1116 static int __devexit myri_sbus_remove(struct of_device *dev)
1118 struct myri_eth *mp = dev_get_drvdata(&dev->dev);
1119 struct net_device *net_dev = mp->dev;
1121 unregister_netdevice(net_dev);
1123 free_irq(net_dev->irq, net_dev);
1125 if (mp->eeprom.cpuvers < CPUVERS_4_0) {
1126 sbus_iounmap(mp->regs, mp->reg_size);
1127 } else {
1128 sbus_iounmap(mp->cregs, PAGE_SIZE);
1129 sbus_iounmap(mp->lregs, (256 * 1024));
1130 sbus_iounmap(mp->lanai, (512 * 1024));
1133 free_netdev(net_dev);
1135 dev_set_drvdata(&dev->dev, NULL);
1137 return 0;
1140 static struct of_device_id myri_sbus_match[] = {
1142 .name = "MYRICOM,mlanai",
1145 .name = "myri",
1150 MODULE_DEVICE_TABLE(of, myri_sbus_match);
1152 static struct of_platform_driver myri_sbus_driver = {
1153 .name = "myri",
1154 .match_table = myri_sbus_match,
1155 .probe = myri_sbus_probe,
1156 .remove = __devexit_p(myri_sbus_remove),
1159 static int __init myri_sbus_init(void)
1161 return of_register_driver(&myri_sbus_driver, &sbus_bus_type);
1164 static void __exit myri_sbus_exit(void)
1166 of_unregister_driver(&myri_sbus_driver);
1169 module_init(myri_sbus_init);
1170 module_exit(myri_sbus_exit);
1172 MODULE_LICENSE("GPL");