2 * raid1.c : Multiple Devices driver for Linux
4 * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
6 * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
8 * RAID-1 management functions.
10 * Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000
12 * Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk>
13 * Various fixes by Neil Brown <neilb@cse.unsw.edu.au>
15 * Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support
16 * bitmapped intelligence in resync:
18 * - bitmap marked during normal i/o
19 * - bitmap used to skip nondirty blocks during sync
21 * Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology:
22 * - persistent bitmap code
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2, or (at your option)
29 * You should have received a copy of the GNU General Public License
30 * (for example /usr/src/linux/COPYING); if not, write to the Free
31 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
34 #include "dm-bio-list.h"
35 #include <linux/raid/raid1.h>
36 #include <linux/raid/bitmap.h>
40 #define PRINTK(x...) printk(x)
46 * Number of guaranteed r1bios in case of extreme VM load:
48 #define NR_RAID1_BIOS 256
51 static void unplug_slaves(mddev_t
*mddev
);
53 static void allow_barrier(conf_t
*conf
);
54 static void lower_barrier(conf_t
*conf
);
56 static void * r1bio_pool_alloc(gfp_t gfp_flags
, void *data
)
58 struct pool_info
*pi
= data
;
60 int size
= offsetof(r1bio_t
, bios
[pi
->raid_disks
]);
62 /* allocate a r1bio with room for raid_disks entries in the bios array */
63 r1_bio
= kzalloc(size
, gfp_flags
);
65 unplug_slaves(pi
->mddev
);
70 static void r1bio_pool_free(void *r1_bio
, void *data
)
75 #define RESYNC_BLOCK_SIZE (64*1024)
76 //#define RESYNC_BLOCK_SIZE PAGE_SIZE
77 #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
78 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
79 #define RESYNC_WINDOW (2048*1024)
81 static void * r1buf_pool_alloc(gfp_t gfp_flags
, void *data
)
83 struct pool_info
*pi
= data
;
89 r1_bio
= r1bio_pool_alloc(gfp_flags
, pi
);
91 unplug_slaves(pi
->mddev
);
96 * Allocate bios : 1 for reading, n-1 for writing
98 for (j
= pi
->raid_disks
; j
-- ; ) {
99 bio
= bio_alloc(gfp_flags
, RESYNC_PAGES
);
102 r1_bio
->bios
[j
] = bio
;
105 * Allocate RESYNC_PAGES data pages and attach them to
107 * If this is a user-requested check/repair, allocate
108 * RESYNC_PAGES for each bio.
110 if (test_bit(MD_RECOVERY_REQUESTED
, &pi
->mddev
->recovery
))
115 bio
= r1_bio
->bios
[j
];
116 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
117 page
= alloc_page(gfp_flags
);
121 bio
->bi_io_vec
[i
].bv_page
= page
;
124 /* If not user-requests, copy the page pointers to all bios */
125 if (!test_bit(MD_RECOVERY_REQUESTED
, &pi
->mddev
->recovery
)) {
126 for (i
=0; i
<RESYNC_PAGES
; i
++)
127 for (j
=1; j
<pi
->raid_disks
; j
++)
128 r1_bio
->bios
[j
]->bi_io_vec
[i
].bv_page
=
129 r1_bio
->bios
[0]->bi_io_vec
[i
].bv_page
;
132 r1_bio
->master_bio
= NULL
;
137 for (i
=0; i
< RESYNC_PAGES
; i
++)
138 for (j
=0 ; j
< pi
->raid_disks
; j
++)
139 safe_put_page(r1_bio
->bios
[j
]->bi_io_vec
[i
].bv_page
);
142 while ( ++j
< pi
->raid_disks
)
143 bio_put(r1_bio
->bios
[j
]);
144 r1bio_pool_free(r1_bio
, data
);
148 static void r1buf_pool_free(void *__r1_bio
, void *data
)
150 struct pool_info
*pi
= data
;
152 r1bio_t
*r1bio
= __r1_bio
;
154 for (i
= 0; i
< RESYNC_PAGES
; i
++)
155 for (j
= pi
->raid_disks
; j
-- ;) {
157 r1bio
->bios
[j
]->bi_io_vec
[i
].bv_page
!=
158 r1bio
->bios
[0]->bi_io_vec
[i
].bv_page
)
159 safe_put_page(r1bio
->bios
[j
]->bi_io_vec
[i
].bv_page
);
161 for (i
=0 ; i
< pi
->raid_disks
; i
++)
162 bio_put(r1bio
->bios
[i
]);
164 r1bio_pool_free(r1bio
, data
);
167 static void put_all_bios(conf_t
*conf
, r1bio_t
*r1_bio
)
171 for (i
= 0; i
< conf
->raid_disks
; i
++) {
172 struct bio
**bio
= r1_bio
->bios
+ i
;
173 if (*bio
&& *bio
!= IO_BLOCKED
)
179 static void free_r1bio(r1bio_t
*r1_bio
)
181 conf_t
*conf
= mddev_to_conf(r1_bio
->mddev
);
184 * Wake up any possible resync thread that waits for the device
189 put_all_bios(conf
, r1_bio
);
190 mempool_free(r1_bio
, conf
->r1bio_pool
);
193 static void put_buf(r1bio_t
*r1_bio
)
195 conf_t
*conf
= mddev_to_conf(r1_bio
->mddev
);
198 for (i
=0; i
<conf
->raid_disks
; i
++) {
199 struct bio
*bio
= r1_bio
->bios
[i
];
201 rdev_dec_pending(conf
->mirrors
[i
].rdev
, r1_bio
->mddev
);
204 mempool_free(r1_bio
, conf
->r1buf_pool
);
209 static void reschedule_retry(r1bio_t
*r1_bio
)
212 mddev_t
*mddev
= r1_bio
->mddev
;
213 conf_t
*conf
= mddev_to_conf(mddev
);
215 spin_lock_irqsave(&conf
->device_lock
, flags
);
216 list_add(&r1_bio
->retry_list
, &conf
->retry_list
);
218 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
220 wake_up(&conf
->wait_barrier
);
221 md_wakeup_thread(mddev
->thread
);
225 * raid_end_bio_io() is called when we have finished servicing a mirrored
226 * operation and are ready to return a success/failure code to the buffer
229 static void raid_end_bio_io(r1bio_t
*r1_bio
)
231 struct bio
*bio
= r1_bio
->master_bio
;
233 /* if nobody has done the final endio yet, do it now */
234 if (!test_and_set_bit(R1BIO_Returned
, &r1_bio
->state
)) {
235 PRINTK(KERN_DEBUG
"raid1: sync end %s on sectors %llu-%llu\n",
236 (bio_data_dir(bio
) == WRITE
) ? "write" : "read",
237 (unsigned long long) bio
->bi_sector
,
238 (unsigned long long) bio
->bi_sector
+
239 (bio
->bi_size
>> 9) - 1);
241 bio_endio(bio
, bio
->bi_size
,
242 test_bit(R1BIO_Uptodate
, &r1_bio
->state
) ? 0 : -EIO
);
248 * Update disk head position estimator based on IRQ completion info.
250 static inline void update_head_pos(int disk
, r1bio_t
*r1_bio
)
252 conf_t
*conf
= mddev_to_conf(r1_bio
->mddev
);
254 conf
->mirrors
[disk
].head_position
=
255 r1_bio
->sector
+ (r1_bio
->sectors
);
258 static int raid1_end_read_request(struct bio
*bio
, unsigned int bytes_done
, int error
)
260 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
261 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
263 conf_t
*conf
= mddev_to_conf(r1_bio
->mddev
);
268 mirror
= r1_bio
->read_disk
;
270 * this branch is our 'one mirror IO has finished' event handler:
272 update_head_pos(mirror
, r1_bio
);
274 if (uptodate
|| conf
->working_disks
<= 1) {
276 * Set R1BIO_Uptodate in our master bio, so that
277 * we will return a good error code for to the higher
278 * levels even if IO on some other mirrored buffer fails.
280 * The 'master' represents the composite IO operation to
281 * user-side. So if something waits for IO, then it will
282 * wait for the 'master' bio.
285 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
287 raid_end_bio_io(r1_bio
);
292 char b
[BDEVNAME_SIZE
];
293 if (printk_ratelimit())
294 printk(KERN_ERR
"raid1: %s: rescheduling sector %llu\n",
295 bdevname(conf
->mirrors
[mirror
].rdev
->bdev
,b
), (unsigned long long)r1_bio
->sector
);
296 reschedule_retry(r1_bio
);
299 rdev_dec_pending(conf
->mirrors
[mirror
].rdev
, conf
->mddev
);
303 static int raid1_end_write_request(struct bio
*bio
, unsigned int bytes_done
, int error
)
305 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
306 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
307 int mirror
, behind
= test_bit(R1BIO_BehindIO
, &r1_bio
->state
);
308 conf_t
*conf
= mddev_to_conf(r1_bio
->mddev
);
309 struct bio
*to_put
= NULL
;
314 for (mirror
= 0; mirror
< conf
->raid_disks
; mirror
++)
315 if (r1_bio
->bios
[mirror
] == bio
)
318 if (error
== -EOPNOTSUPP
&& test_bit(R1BIO_Barrier
, &r1_bio
->state
)) {
319 set_bit(BarriersNotsupp
, &conf
->mirrors
[mirror
].rdev
->flags
);
320 set_bit(R1BIO_BarrierRetry
, &r1_bio
->state
);
321 r1_bio
->mddev
->barriers_work
= 0;
324 * this branch is our 'one mirror IO has finished' event handler:
326 r1_bio
->bios
[mirror
] = NULL
;
329 md_error(r1_bio
->mddev
, conf
->mirrors
[mirror
].rdev
);
330 /* an I/O failed, we can't clear the bitmap */
331 set_bit(R1BIO_Degraded
, &r1_bio
->state
);
334 * Set R1BIO_Uptodate in our master bio, so that
335 * we will return a good error code for to the higher
336 * levels even if IO on some other mirrored buffer fails.
338 * The 'master' represents the composite IO operation to
339 * user-side. So if something waits for IO, then it will
340 * wait for the 'master' bio.
342 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
344 update_head_pos(mirror
, r1_bio
);
347 if (test_bit(WriteMostly
, &conf
->mirrors
[mirror
].rdev
->flags
))
348 atomic_dec(&r1_bio
->behind_remaining
);
350 /* In behind mode, we ACK the master bio once the I/O has safely
351 * reached all non-writemostly disks. Setting the Returned bit
352 * ensures that this gets done only once -- we don't ever want to
353 * return -EIO here, instead we'll wait */
355 if (atomic_read(&r1_bio
->behind_remaining
) >= (atomic_read(&r1_bio
->remaining
)-1) &&
356 test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
357 /* Maybe we can return now */
358 if (!test_and_set_bit(R1BIO_Returned
, &r1_bio
->state
)) {
359 struct bio
*mbio
= r1_bio
->master_bio
;
360 PRINTK(KERN_DEBUG
"raid1: behind end write sectors %llu-%llu\n",
361 (unsigned long long) mbio
->bi_sector
,
362 (unsigned long long) mbio
->bi_sector
+
363 (mbio
->bi_size
>> 9) - 1);
364 bio_endio(mbio
, mbio
->bi_size
, 0);
371 * Let's see if all mirrored write operations have finished
374 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
375 if (test_bit(R1BIO_BarrierRetry
, &r1_bio
->state
)) {
376 reschedule_retry(r1_bio
);
377 /* Don't dec_pending yet, we want to hold
378 * the reference over the retry
382 if (test_bit(R1BIO_BehindIO
, &r1_bio
->state
)) {
383 /* free extra copy of the data pages */
384 int i
= bio
->bi_vcnt
;
386 safe_put_page(bio
->bi_io_vec
[i
].bv_page
);
388 /* clear the bitmap if all writes complete successfully */
389 bitmap_endwrite(r1_bio
->mddev
->bitmap
, r1_bio
->sector
,
391 !test_bit(R1BIO_Degraded
, &r1_bio
->state
),
393 md_write_end(r1_bio
->mddev
);
394 raid_end_bio_io(r1_bio
);
397 rdev_dec_pending(conf
->mirrors
[mirror
].rdev
, conf
->mddev
);
407 * This routine returns the disk from which the requested read should
408 * be done. There is a per-array 'next expected sequential IO' sector
409 * number - if this matches on the next IO then we use the last disk.
410 * There is also a per-disk 'last know head position' sector that is
411 * maintained from IRQ contexts, both the normal and the resync IO
412 * completion handlers update this position correctly. If there is no
413 * perfect sequential match then we pick the disk whose head is closest.
415 * If there are 2 mirrors in the same 2 devices, performance degrades
416 * because position is mirror, not device based.
418 * The rdev for the device selected will have nr_pending incremented.
420 static int read_balance(conf_t
*conf
, r1bio_t
*r1_bio
)
422 const unsigned long this_sector
= r1_bio
->sector
;
423 int new_disk
= conf
->last_used
, disk
= new_disk
;
425 const int sectors
= r1_bio
->sectors
;
426 sector_t new_distance
, current_distance
;
431 * Check if we can balance. We can balance on the whole
432 * device if no resync is going on, or below the resync window.
433 * We take the first readable disk when above the resync window.
436 if (conf
->mddev
->recovery_cp
< MaxSector
&&
437 (this_sector
+ sectors
>= conf
->next_resync
)) {
438 /* Choose the first operation device, for consistancy */
441 for (rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
442 r1_bio
->bios
[new_disk
] == IO_BLOCKED
||
443 !rdev
|| !test_bit(In_sync
, &rdev
->flags
)
444 || test_bit(WriteMostly
, &rdev
->flags
);
445 rdev
= rcu_dereference(conf
->mirrors
[++new_disk
].rdev
)) {
447 if (rdev
&& test_bit(In_sync
, &rdev
->flags
) &&
448 r1_bio
->bios
[new_disk
] != IO_BLOCKED
)
449 wonly_disk
= new_disk
;
451 if (new_disk
== conf
->raid_disks
- 1) {
452 new_disk
= wonly_disk
;
460 /* make sure the disk is operational */
461 for (rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
462 r1_bio
->bios
[new_disk
] == IO_BLOCKED
||
463 !rdev
|| !test_bit(In_sync
, &rdev
->flags
) ||
464 test_bit(WriteMostly
, &rdev
->flags
);
465 rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
)) {
467 if (rdev
&& test_bit(In_sync
, &rdev
->flags
) &&
468 r1_bio
->bios
[new_disk
] != IO_BLOCKED
)
469 wonly_disk
= new_disk
;
472 new_disk
= conf
->raid_disks
;
474 if (new_disk
== disk
) {
475 new_disk
= wonly_disk
;
484 /* now disk == new_disk == starting point for search */
487 * Don't change to another disk for sequential reads:
489 if (conf
->next_seq_sect
== this_sector
)
491 if (this_sector
== conf
->mirrors
[new_disk
].head_position
)
494 current_distance
= abs(this_sector
- conf
->mirrors
[disk
].head_position
);
496 /* Find the disk whose head is closest */
500 disk
= conf
->raid_disks
;
503 rdev
= rcu_dereference(conf
->mirrors
[disk
].rdev
);
505 if (!rdev
|| r1_bio
->bios
[disk
] == IO_BLOCKED
||
506 !test_bit(In_sync
, &rdev
->flags
) ||
507 test_bit(WriteMostly
, &rdev
->flags
))
510 if (!atomic_read(&rdev
->nr_pending
)) {
514 new_distance
= abs(this_sector
- conf
->mirrors
[disk
].head_position
);
515 if (new_distance
< current_distance
) {
516 current_distance
= new_distance
;
519 } while (disk
!= conf
->last_used
);
525 rdev
= rcu_dereference(conf
->mirrors
[new_disk
].rdev
);
528 atomic_inc(&rdev
->nr_pending
);
529 if (!test_bit(In_sync
, &rdev
->flags
)) {
530 /* cannot risk returning a device that failed
531 * before we inc'ed nr_pending
533 rdev_dec_pending(rdev
, conf
->mddev
);
536 conf
->next_seq_sect
= this_sector
+ sectors
;
537 conf
->last_used
= new_disk
;
544 static void unplug_slaves(mddev_t
*mddev
)
546 conf_t
*conf
= mddev_to_conf(mddev
);
550 for (i
=0; i
<mddev
->raid_disks
; i
++) {
551 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
552 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
) && atomic_read(&rdev
->nr_pending
)) {
553 request_queue_t
*r_queue
= bdev_get_queue(rdev
->bdev
);
555 atomic_inc(&rdev
->nr_pending
);
558 if (r_queue
->unplug_fn
)
559 r_queue
->unplug_fn(r_queue
);
561 rdev_dec_pending(rdev
, mddev
);
568 static void raid1_unplug(request_queue_t
*q
)
570 mddev_t
*mddev
= q
->queuedata
;
572 unplug_slaves(mddev
);
573 md_wakeup_thread(mddev
->thread
);
576 static int raid1_issue_flush(request_queue_t
*q
, struct gendisk
*disk
,
577 sector_t
*error_sector
)
579 mddev_t
*mddev
= q
->queuedata
;
580 conf_t
*conf
= mddev_to_conf(mddev
);
584 for (i
=0; i
<mddev
->raid_disks
&& ret
== 0; i
++) {
585 mdk_rdev_t
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
586 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
587 struct block_device
*bdev
= rdev
->bdev
;
588 request_queue_t
*r_queue
= bdev_get_queue(bdev
);
590 if (!r_queue
->issue_flush_fn
)
593 atomic_inc(&rdev
->nr_pending
);
595 ret
= r_queue
->issue_flush_fn(r_queue
, bdev
->bd_disk
,
597 rdev_dec_pending(rdev
, mddev
);
607 * Sometimes we need to suspend IO while we do something else,
608 * either some resync/recovery, or reconfigure the array.
609 * To do this we raise a 'barrier'.
610 * The 'barrier' is a counter that can be raised multiple times
611 * to count how many activities are happening which preclude
613 * We can only raise the barrier if there is no pending IO.
614 * i.e. if nr_pending == 0.
615 * We choose only to raise the barrier if no-one is waiting for the
616 * barrier to go down. This means that as soon as an IO request
617 * is ready, no other operations which require a barrier will start
618 * until the IO request has had a chance.
620 * So: regular IO calls 'wait_barrier'. When that returns there
621 * is no backgroup IO happening, It must arrange to call
622 * allow_barrier when it has finished its IO.
623 * backgroup IO calls must call raise_barrier. Once that returns
624 * there is no normal IO happeing. It must arrange to call
625 * lower_barrier when the particular background IO completes.
627 #define RESYNC_DEPTH 32
629 static void raise_barrier(conf_t
*conf
)
631 spin_lock_irq(&conf
->resync_lock
);
633 /* Wait until no block IO is waiting */
634 wait_event_lock_irq(conf
->wait_barrier
, !conf
->nr_waiting
,
636 raid1_unplug(conf
->mddev
->queue
));
638 /* block any new IO from starting */
641 /* No wait for all pending IO to complete */
642 wait_event_lock_irq(conf
->wait_barrier
,
643 !conf
->nr_pending
&& conf
->barrier
< RESYNC_DEPTH
,
645 raid1_unplug(conf
->mddev
->queue
));
647 spin_unlock_irq(&conf
->resync_lock
);
650 static void lower_barrier(conf_t
*conf
)
653 spin_lock_irqsave(&conf
->resync_lock
, flags
);
655 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
656 wake_up(&conf
->wait_barrier
);
659 static void wait_barrier(conf_t
*conf
)
661 spin_lock_irq(&conf
->resync_lock
);
664 wait_event_lock_irq(conf
->wait_barrier
, !conf
->barrier
,
666 raid1_unplug(conf
->mddev
->queue
));
670 spin_unlock_irq(&conf
->resync_lock
);
673 static void allow_barrier(conf_t
*conf
)
676 spin_lock_irqsave(&conf
->resync_lock
, flags
);
678 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
679 wake_up(&conf
->wait_barrier
);
682 static void freeze_array(conf_t
*conf
)
684 /* stop syncio and normal IO and wait for everything to
686 * We increment barrier and nr_waiting, and then
687 * wait until barrier+nr_pending match nr_queued+2
689 spin_lock_irq(&conf
->resync_lock
);
692 wait_event_lock_irq(conf
->wait_barrier
,
693 conf
->barrier
+conf
->nr_pending
== conf
->nr_queued
+2,
695 raid1_unplug(conf
->mddev
->queue
));
696 spin_unlock_irq(&conf
->resync_lock
);
698 static void unfreeze_array(conf_t
*conf
)
700 /* reverse the effect of the freeze */
701 spin_lock_irq(&conf
->resync_lock
);
704 wake_up(&conf
->wait_barrier
);
705 spin_unlock_irq(&conf
->resync_lock
);
709 /* duplicate the data pages for behind I/O */
710 static struct page
**alloc_behind_pages(struct bio
*bio
)
713 struct bio_vec
*bvec
;
714 struct page
**pages
= kzalloc(bio
->bi_vcnt
* sizeof(struct page
*),
716 if (unlikely(!pages
))
719 bio_for_each_segment(bvec
, bio
, i
) {
720 pages
[i
] = alloc_page(GFP_NOIO
);
721 if (unlikely(!pages
[i
]))
723 memcpy(kmap(pages
[i
]) + bvec
->bv_offset
,
724 kmap(bvec
->bv_page
) + bvec
->bv_offset
, bvec
->bv_len
);
726 kunmap(bvec
->bv_page
);
733 for (i
= 0; i
< bio
->bi_vcnt
&& pages
[i
]; i
++)
736 PRINTK("%dB behind alloc failed, doing sync I/O\n", bio
->bi_size
);
740 static int make_request(request_queue_t
*q
, struct bio
* bio
)
742 mddev_t
*mddev
= q
->queuedata
;
743 conf_t
*conf
= mddev_to_conf(mddev
);
744 mirror_info_t
*mirror
;
746 struct bio
*read_bio
;
747 int i
, targets
= 0, disks
;
749 struct bitmap
*bitmap
= mddev
->bitmap
;
752 struct page
**behind_pages
= NULL
;
753 const int rw
= bio_data_dir(bio
);
757 * Register the new request and wait if the reconstruction
758 * thread has put up a bar for new requests.
759 * Continue immediately if no resync is active currently.
760 * We test barriers_work *after* md_write_start as md_write_start
761 * may cause the first superblock write, and that will check out
765 md_write_start(mddev
, bio
); /* wait on superblock update early */
767 if (unlikely(!mddev
->barriers_work
&& bio_barrier(bio
))) {
770 bio_endio(bio
, bio
->bi_size
, -EOPNOTSUPP
);
776 disk_stat_inc(mddev
->gendisk
, ios
[rw
]);
777 disk_stat_add(mddev
->gendisk
, sectors
[rw
], bio_sectors(bio
));
780 * make_request() can abort the operation when READA is being
781 * used and no empty request is available.
784 r1_bio
= mempool_alloc(conf
->r1bio_pool
, GFP_NOIO
);
786 r1_bio
->master_bio
= bio
;
787 r1_bio
->sectors
= bio
->bi_size
>> 9;
789 r1_bio
->mddev
= mddev
;
790 r1_bio
->sector
= bio
->bi_sector
;
794 * read balancing logic:
796 int rdisk
= read_balance(conf
, r1_bio
);
799 /* couldn't find anywhere to read from */
800 raid_end_bio_io(r1_bio
);
803 mirror
= conf
->mirrors
+ rdisk
;
805 r1_bio
->read_disk
= rdisk
;
807 read_bio
= bio_clone(bio
, GFP_NOIO
);
809 r1_bio
->bios
[rdisk
] = read_bio
;
811 read_bio
->bi_sector
= r1_bio
->sector
+ mirror
->rdev
->data_offset
;
812 read_bio
->bi_bdev
= mirror
->rdev
->bdev
;
813 read_bio
->bi_end_io
= raid1_end_read_request
;
814 read_bio
->bi_rw
= READ
;
815 read_bio
->bi_private
= r1_bio
;
817 generic_make_request(read_bio
);
824 /* first select target devices under spinlock and
825 * inc refcount on their rdev. Record them by setting
828 disks
= conf
->raid_disks
;
830 { static int first
=1;
831 if (first
) printk("First Write sector %llu disks %d\n",
832 (unsigned long long)r1_bio
->sector
, disks
);
837 for (i
= 0; i
< disks
; i
++) {
838 if ((rdev
=rcu_dereference(conf
->mirrors
[i
].rdev
)) != NULL
&&
839 !test_bit(Faulty
, &rdev
->flags
)) {
840 atomic_inc(&rdev
->nr_pending
);
841 if (test_bit(Faulty
, &rdev
->flags
)) {
842 rdev_dec_pending(rdev
, mddev
);
843 r1_bio
->bios
[i
] = NULL
;
845 r1_bio
->bios
[i
] = bio
;
848 r1_bio
->bios
[i
] = NULL
;
852 BUG_ON(targets
== 0); /* we never fail the last device */
854 if (targets
< conf
->raid_disks
) {
855 /* array is degraded, we will not clear the bitmap
856 * on I/O completion (see raid1_end_write_request) */
857 set_bit(R1BIO_Degraded
, &r1_bio
->state
);
860 /* do behind I/O ? */
862 atomic_read(&bitmap
->behind_writes
) < bitmap
->max_write_behind
&&
863 (behind_pages
= alloc_behind_pages(bio
)) != NULL
)
864 set_bit(R1BIO_BehindIO
, &r1_bio
->state
);
866 atomic_set(&r1_bio
->remaining
, 0);
867 atomic_set(&r1_bio
->behind_remaining
, 0);
869 do_barriers
= bio_barrier(bio
);
871 set_bit(R1BIO_Barrier
, &r1_bio
->state
);
874 for (i
= 0; i
< disks
; i
++) {
876 if (!r1_bio
->bios
[i
])
879 mbio
= bio_clone(bio
, GFP_NOIO
);
880 r1_bio
->bios
[i
] = mbio
;
882 mbio
->bi_sector
= r1_bio
->sector
+ conf
->mirrors
[i
].rdev
->data_offset
;
883 mbio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
884 mbio
->bi_end_io
= raid1_end_write_request
;
885 mbio
->bi_rw
= WRITE
| do_barriers
;
886 mbio
->bi_private
= r1_bio
;
889 struct bio_vec
*bvec
;
892 /* Yes, I really want the '__' version so that
893 * we clear any unused pointer in the io_vec, rather
894 * than leave them unchanged. This is important
895 * because when we come to free the pages, we won't
896 * know the originial bi_idx, so we just free
899 __bio_for_each_segment(bvec
, mbio
, j
, 0)
900 bvec
->bv_page
= behind_pages
[j
];
901 if (test_bit(WriteMostly
, &conf
->mirrors
[i
].rdev
->flags
))
902 atomic_inc(&r1_bio
->behind_remaining
);
905 atomic_inc(&r1_bio
->remaining
);
907 bio_list_add(&bl
, mbio
);
909 kfree(behind_pages
); /* the behind pages are attached to the bios now */
911 bitmap_startwrite(bitmap
, bio
->bi_sector
, r1_bio
->sectors
,
912 test_bit(R1BIO_BehindIO
, &r1_bio
->state
));
913 spin_lock_irqsave(&conf
->device_lock
, flags
);
914 bio_list_merge(&conf
->pending_bio_list
, &bl
);
917 blk_plug_device(mddev
->queue
);
918 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
921 while ((bio
= bio_list_pop(&bl
)) != NULL
)
922 generic_make_request(bio
);
928 static void status(struct seq_file
*seq
, mddev_t
*mddev
)
930 conf_t
*conf
= mddev_to_conf(mddev
);
933 seq_printf(seq
, " [%d/%d] [", conf
->raid_disks
,
934 conf
->working_disks
);
935 for (i
= 0; i
< conf
->raid_disks
; i
++)
936 seq_printf(seq
, "%s",
937 conf
->mirrors
[i
].rdev
&&
938 test_bit(In_sync
, &conf
->mirrors
[i
].rdev
->flags
) ? "U" : "_");
939 seq_printf(seq
, "]");
943 static void error(mddev_t
*mddev
, mdk_rdev_t
*rdev
)
945 char b
[BDEVNAME_SIZE
];
946 conf_t
*conf
= mddev_to_conf(mddev
);
949 * If it is not operational, then we have already marked it as dead
950 * else if it is the last working disks, ignore the error, let the
951 * next level up know.
952 * else mark the drive as failed
954 if (test_bit(In_sync
, &rdev
->flags
)
955 && conf
->working_disks
== 1)
957 * Don't fail the drive, act as though we were just a
958 * normal single drive
961 if (test_bit(In_sync
, &rdev
->flags
)) {
963 conf
->working_disks
--;
965 * if recovery is running, make sure it aborts.
967 set_bit(MD_RECOVERY_ERR
, &mddev
->recovery
);
969 clear_bit(In_sync
, &rdev
->flags
);
970 set_bit(Faulty
, &rdev
->flags
);
972 printk(KERN_ALERT
"raid1: Disk failure on %s, disabling device. \n"
973 " Operation continuing on %d devices\n",
974 bdevname(rdev
->bdev
,b
), conf
->working_disks
);
977 static void print_conf(conf_t
*conf
)
982 printk("RAID1 conf printout:\n");
987 printk(" --- wd:%d rd:%d\n", conf
->working_disks
,
990 for (i
= 0; i
< conf
->raid_disks
; i
++) {
991 char b
[BDEVNAME_SIZE
];
992 tmp
= conf
->mirrors
+ i
;
994 printk(" disk %d, wo:%d, o:%d, dev:%s\n",
995 i
, !test_bit(In_sync
, &tmp
->rdev
->flags
), !test_bit(Faulty
, &tmp
->rdev
->flags
),
996 bdevname(tmp
->rdev
->bdev
,b
));
1000 static void close_sync(conf_t
*conf
)
1003 allow_barrier(conf
);
1005 mempool_destroy(conf
->r1buf_pool
);
1006 conf
->r1buf_pool
= NULL
;
1009 static int raid1_spare_active(mddev_t
*mddev
)
1012 conf_t
*conf
= mddev
->private;
1016 * Find all failed disks within the RAID1 configuration
1017 * and mark them readable
1019 for (i
= 0; i
< conf
->raid_disks
; i
++) {
1020 tmp
= conf
->mirrors
+ i
;
1022 && !test_bit(Faulty
, &tmp
->rdev
->flags
)
1023 && !test_bit(In_sync
, &tmp
->rdev
->flags
)) {
1024 conf
->working_disks
++;
1026 set_bit(In_sync
, &tmp
->rdev
->flags
);
1035 static int raid1_add_disk(mddev_t
*mddev
, mdk_rdev_t
*rdev
)
1037 conf_t
*conf
= mddev
->private;
1042 for (mirror
=0; mirror
< mddev
->raid_disks
; mirror
++)
1043 if ( !(p
=conf
->mirrors
+mirror
)->rdev
) {
1045 blk_queue_stack_limits(mddev
->queue
,
1046 rdev
->bdev
->bd_disk
->queue
);
1047 /* as we don't honour merge_bvec_fn, we must never risk
1048 * violating it, so limit ->max_sector to one PAGE, as
1049 * a one page request is never in violation.
1051 if (rdev
->bdev
->bd_disk
->queue
->merge_bvec_fn
&&
1052 mddev
->queue
->max_sectors
> (PAGE_SIZE
>>9))
1053 blk_queue_max_sectors(mddev
->queue
, PAGE_SIZE
>>9);
1055 p
->head_position
= 0;
1056 rdev
->raid_disk
= mirror
;
1058 /* As all devices are equivalent, we don't need a full recovery
1059 * if this was recently any drive of the array
1061 if (rdev
->saved_raid_disk
< 0)
1063 rcu_assign_pointer(p
->rdev
, rdev
);
1071 static int raid1_remove_disk(mddev_t
*mddev
, int number
)
1073 conf_t
*conf
= mddev
->private;
1076 mirror_info_t
*p
= conf
->mirrors
+ number
;
1081 if (test_bit(In_sync
, &rdev
->flags
) ||
1082 atomic_read(&rdev
->nr_pending
)) {
1088 if (atomic_read(&rdev
->nr_pending
)) {
1089 /* lost the race, try later */
1101 static int end_sync_read(struct bio
*bio
, unsigned int bytes_done
, int error
)
1103 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
1109 for (i
=r1_bio
->mddev
->raid_disks
; i
--; )
1110 if (r1_bio
->bios
[i
] == bio
)
1113 update_head_pos(i
, r1_bio
);
1115 * we have read a block, now it needs to be re-written,
1116 * or re-read if the read failed.
1117 * We don't do much here, just schedule handling by raid1d
1119 if (test_bit(BIO_UPTODATE
, &bio
->bi_flags
))
1120 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
1122 if (atomic_dec_and_test(&r1_bio
->remaining
))
1123 reschedule_retry(r1_bio
);
1127 static int end_sync_write(struct bio
*bio
, unsigned int bytes_done
, int error
)
1129 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
1130 r1bio_t
* r1_bio
= (r1bio_t
*)(bio
->bi_private
);
1131 mddev_t
*mddev
= r1_bio
->mddev
;
1132 conf_t
*conf
= mddev_to_conf(mddev
);
1139 for (i
= 0; i
< conf
->raid_disks
; i
++)
1140 if (r1_bio
->bios
[i
] == bio
) {
1145 int sync_blocks
= 0;
1146 sector_t s
= r1_bio
->sector
;
1147 long sectors_to_go
= r1_bio
->sectors
;
1148 /* make sure these bits doesn't get cleared. */
1150 bitmap_end_sync(mddev
->bitmap
, r1_bio
->sector
,
1153 sectors_to_go
-= sync_blocks
;
1154 } while (sectors_to_go
> 0);
1155 md_error(mddev
, conf
->mirrors
[mirror
].rdev
);
1158 update_head_pos(mirror
, r1_bio
);
1160 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
1161 md_done_sync(mddev
, r1_bio
->sectors
, uptodate
);
1167 static void sync_request_write(mddev_t
*mddev
, r1bio_t
*r1_bio
)
1169 conf_t
*conf
= mddev_to_conf(mddev
);
1171 int disks
= conf
->raid_disks
;
1172 struct bio
*bio
, *wbio
;
1174 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1177 if (test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1178 /* We have read all readable devices. If we haven't
1179 * got the block, then there is no hope left.
1180 * If we have, then we want to do a comparison
1181 * and skip the write if everything is the same.
1182 * If any blocks failed to read, then we need to
1183 * attempt an over-write
1186 if (!test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
1187 for (i
=0; i
<mddev
->raid_disks
; i
++)
1188 if (r1_bio
->bios
[i
]->bi_end_io
== end_sync_read
)
1189 md_error(mddev
, conf
->mirrors
[i
].rdev
);
1191 md_done_sync(mddev
, r1_bio
->sectors
, 1);
1195 for (primary
=0; primary
<mddev
->raid_disks
; primary
++)
1196 if (r1_bio
->bios
[primary
]->bi_end_io
== end_sync_read
&&
1197 test_bit(BIO_UPTODATE
, &r1_bio
->bios
[primary
]->bi_flags
)) {
1198 r1_bio
->bios
[primary
]->bi_end_io
= NULL
;
1199 rdev_dec_pending(conf
->mirrors
[primary
].rdev
, mddev
);
1202 r1_bio
->read_disk
= primary
;
1203 for (i
=0; i
<mddev
->raid_disks
; i
++)
1204 if (r1_bio
->bios
[i
]->bi_end_io
== end_sync_read
&&
1205 test_bit(BIO_UPTODATE
, &r1_bio
->bios
[i
]->bi_flags
)) {
1207 int vcnt
= r1_bio
->sectors
>> (PAGE_SHIFT
- 9);
1208 struct bio
*pbio
= r1_bio
->bios
[primary
];
1209 struct bio
*sbio
= r1_bio
->bios
[i
];
1210 for (j
= vcnt
; j
-- ; )
1211 if (memcmp(page_address(pbio
->bi_io_vec
[j
].bv_page
),
1212 page_address(sbio
->bi_io_vec
[j
].bv_page
),
1216 mddev
->resync_mismatches
+= r1_bio
->sectors
;
1217 if (j
< 0 || test_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
)) {
1218 sbio
->bi_end_io
= NULL
;
1219 rdev_dec_pending(conf
->mirrors
[i
].rdev
, mddev
);
1221 /* fixup the bio for reuse */
1222 sbio
->bi_vcnt
= vcnt
;
1223 sbio
->bi_size
= r1_bio
->sectors
<< 9;
1225 sbio
->bi_phys_segments
= 0;
1226 sbio
->bi_hw_segments
= 0;
1227 sbio
->bi_hw_front_size
= 0;
1228 sbio
->bi_hw_back_size
= 0;
1229 sbio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
1230 sbio
->bi_flags
|= 1 << BIO_UPTODATE
;
1231 sbio
->bi_next
= NULL
;
1232 sbio
->bi_sector
= r1_bio
->sector
+
1233 conf
->mirrors
[i
].rdev
->data_offset
;
1234 sbio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
1238 if (!test_bit(R1BIO_Uptodate
, &r1_bio
->state
)) {
1239 /* ouch - failed to read all of that.
1240 * Try some synchronous reads of other devices to get
1241 * good data, much like with normal read errors. Only
1242 * read into the pages we already have so they we don't
1243 * need to re-issue the read request.
1244 * We don't need to freeze the array, because being in an
1245 * active sync request, there is no normal IO, and
1246 * no overlapping syncs.
1248 sector_t sect
= r1_bio
->sector
;
1249 int sectors
= r1_bio
->sectors
;
1254 int d
= r1_bio
->read_disk
;
1258 if (s
> (PAGE_SIZE
>>9))
1261 if (r1_bio
->bios
[d
]->bi_end_io
== end_sync_read
) {
1262 rdev
= conf
->mirrors
[d
].rdev
;
1263 if (sync_page_io(rdev
->bdev
,
1264 sect
+ rdev
->data_offset
,
1266 bio
->bi_io_vec
[idx
].bv_page
,
1273 if (d
== conf
->raid_disks
)
1275 } while (!success
&& d
!= r1_bio
->read_disk
);
1279 /* write it back and re-read */
1280 set_bit(R1BIO_Uptodate
, &r1_bio
->state
);
1281 while (d
!= r1_bio
->read_disk
) {
1283 d
= conf
->raid_disks
;
1285 if (r1_bio
->bios
[d
]->bi_end_io
!= end_sync_read
)
1287 rdev
= conf
->mirrors
[d
].rdev
;
1288 atomic_add(s
, &rdev
->corrected_errors
);
1289 if (sync_page_io(rdev
->bdev
,
1290 sect
+ rdev
->data_offset
,
1292 bio
->bi_io_vec
[idx
].bv_page
,
1294 md_error(mddev
, rdev
);
1297 while (d
!= r1_bio
->read_disk
) {
1299 d
= conf
->raid_disks
;
1301 if (r1_bio
->bios
[d
]->bi_end_io
!= end_sync_read
)
1303 rdev
= conf
->mirrors
[d
].rdev
;
1304 if (sync_page_io(rdev
->bdev
,
1305 sect
+ rdev
->data_offset
,
1307 bio
->bi_io_vec
[idx
].bv_page
,
1309 md_error(mddev
, rdev
);
1312 char b
[BDEVNAME_SIZE
];
1313 /* Cannot read from anywhere, array is toast */
1314 md_error(mddev
, conf
->mirrors
[r1_bio
->read_disk
].rdev
);
1315 printk(KERN_ALERT
"raid1: %s: unrecoverable I/O read error"
1316 " for block %llu\n",
1317 bdevname(bio
->bi_bdev
,b
),
1318 (unsigned long long)r1_bio
->sector
);
1319 md_done_sync(mddev
, r1_bio
->sectors
, 0);
1332 atomic_set(&r1_bio
->remaining
, 1);
1333 for (i
= 0; i
< disks
; i
++) {
1334 wbio
= r1_bio
->bios
[i
];
1335 if (wbio
->bi_end_io
== NULL
||
1336 (wbio
->bi_end_io
== end_sync_read
&&
1337 (i
== r1_bio
->read_disk
||
1338 !test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
))))
1341 wbio
->bi_rw
= WRITE
;
1342 wbio
->bi_end_io
= end_sync_write
;
1343 atomic_inc(&r1_bio
->remaining
);
1344 md_sync_acct(conf
->mirrors
[i
].rdev
->bdev
, wbio
->bi_size
>> 9);
1346 generic_make_request(wbio
);
1349 if (atomic_dec_and_test(&r1_bio
->remaining
)) {
1350 /* if we're here, all write(s) have completed, so clean up */
1351 md_done_sync(mddev
, r1_bio
->sectors
, 1);
1357 * This is a kernel thread which:
1359 * 1. Retries failed read operations on working mirrors.
1360 * 2. Updates the raid superblock when problems encounter.
1361 * 3. Performs writes following reads for array syncronising.
1364 static void raid1d(mddev_t
*mddev
)
1368 unsigned long flags
;
1369 conf_t
*conf
= mddev_to_conf(mddev
);
1370 struct list_head
*head
= &conf
->retry_list
;
1374 md_check_recovery(mddev
);
1377 char b
[BDEVNAME_SIZE
];
1378 spin_lock_irqsave(&conf
->device_lock
, flags
);
1380 if (conf
->pending_bio_list
.head
) {
1381 bio
= bio_list_get(&conf
->pending_bio_list
);
1382 blk_remove_plug(mddev
->queue
);
1383 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1384 /* flush any pending bitmap writes to disk before proceeding w/ I/O */
1385 if (bitmap_unplug(mddev
->bitmap
) != 0)
1386 printk("%s: bitmap file write failed!\n", mdname(mddev
));
1388 while (bio
) { /* submit pending writes */
1389 struct bio
*next
= bio
->bi_next
;
1390 bio
->bi_next
= NULL
;
1391 generic_make_request(bio
);
1399 if (list_empty(head
))
1401 r1_bio
= list_entry(head
->prev
, r1bio_t
, retry_list
);
1402 list_del(head
->prev
);
1404 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1406 mddev
= r1_bio
->mddev
;
1407 conf
= mddev_to_conf(mddev
);
1408 if (test_bit(R1BIO_IsSync
, &r1_bio
->state
)) {
1409 sync_request_write(mddev
, r1_bio
);
1411 } else if (test_bit(R1BIO_BarrierRetry
, &r1_bio
->state
)) {
1412 /* some requests in the r1bio were BIO_RW_BARRIER
1413 * requests which failed with -EOPNOTSUPP. Hohumm..
1414 * Better resubmit without the barrier.
1415 * We know which devices to resubmit for, because
1416 * all others have had their bios[] entry cleared.
1419 clear_bit(R1BIO_BarrierRetry
, &r1_bio
->state
);
1420 clear_bit(R1BIO_Barrier
, &r1_bio
->state
);
1421 for (i
=0; i
< conf
->raid_disks
; i
++)
1422 if (r1_bio
->bios
[i
])
1423 atomic_inc(&r1_bio
->remaining
);
1424 for (i
=0; i
< conf
->raid_disks
; i
++)
1425 if (r1_bio
->bios
[i
]) {
1426 struct bio_vec
*bvec
;
1429 bio
= bio_clone(r1_bio
->master_bio
, GFP_NOIO
);
1430 /* copy pages from the failed bio, as
1431 * this might be a write-behind device */
1432 __bio_for_each_segment(bvec
, bio
, j
, 0)
1433 bvec
->bv_page
= bio_iovec_idx(r1_bio
->bios
[i
], j
)->bv_page
;
1434 bio_put(r1_bio
->bios
[i
]);
1435 bio
->bi_sector
= r1_bio
->sector
+
1436 conf
->mirrors
[i
].rdev
->data_offset
;
1437 bio
->bi_bdev
= conf
->mirrors
[i
].rdev
->bdev
;
1438 bio
->bi_end_io
= raid1_end_write_request
;
1440 bio
->bi_private
= r1_bio
;
1441 r1_bio
->bios
[i
] = bio
;
1442 generic_make_request(bio
);
1447 /* we got a read error. Maybe the drive is bad. Maybe just
1448 * the block and we can fix it.
1449 * We freeze all other IO, and try reading the block from
1450 * other devices. When we find one, we re-write
1451 * and check it that fixes the read error.
1452 * This is all done synchronously while the array is
1455 sector_t sect
= r1_bio
->sector
;
1456 int sectors
= r1_bio
->sectors
;
1458 if (mddev
->ro
== 0) while(sectors
) {
1460 int d
= r1_bio
->read_disk
;
1463 if (s
> (PAGE_SIZE
>>9))
1467 rdev
= conf
->mirrors
[d
].rdev
;
1469 test_bit(In_sync
, &rdev
->flags
) &&
1470 sync_page_io(rdev
->bdev
,
1471 sect
+ rdev
->data_offset
,
1473 conf
->tmppage
, READ
))
1477 if (d
== conf
->raid_disks
)
1480 } while (!success
&& d
!= r1_bio
->read_disk
);
1483 /* write it back and re-read */
1485 while (d
!= r1_bio
->read_disk
) {
1487 d
= conf
->raid_disks
;
1489 rdev
= conf
->mirrors
[d
].rdev
;
1490 atomic_add(s
, &rdev
->corrected_errors
);
1492 test_bit(In_sync
, &rdev
->flags
)) {
1493 if (sync_page_io(rdev
->bdev
,
1494 sect
+ rdev
->data_offset
,
1495 s
<<9, conf
->tmppage
, WRITE
) == 0)
1496 /* Well, this device is dead */
1497 md_error(mddev
, rdev
);
1501 while (d
!= r1_bio
->read_disk
) {
1503 d
= conf
->raid_disks
;
1505 rdev
= conf
->mirrors
[d
].rdev
;
1507 test_bit(In_sync
, &rdev
->flags
)) {
1508 if (sync_page_io(rdev
->bdev
,
1509 sect
+ rdev
->data_offset
,
1510 s
<<9, conf
->tmppage
, READ
) == 0)
1511 /* Well, this device is dead */
1512 md_error(mddev
, rdev
);
1516 /* Cannot read from anywhere -- bye bye array */
1517 md_error(mddev
, conf
->mirrors
[r1_bio
->read_disk
].rdev
);
1524 unfreeze_array(conf
);
1526 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1527 if ((disk
=read_balance(conf
, r1_bio
)) == -1) {
1528 printk(KERN_ALERT
"raid1: %s: unrecoverable I/O"
1529 " read error for block %llu\n",
1530 bdevname(bio
->bi_bdev
,b
),
1531 (unsigned long long)r1_bio
->sector
);
1532 raid_end_bio_io(r1_bio
);
1534 r1_bio
->bios
[r1_bio
->read_disk
] =
1535 mddev
->ro
? IO_BLOCKED
: NULL
;
1536 r1_bio
->read_disk
= disk
;
1538 bio
= bio_clone(r1_bio
->master_bio
, GFP_NOIO
);
1539 r1_bio
->bios
[r1_bio
->read_disk
] = bio
;
1540 rdev
= conf
->mirrors
[disk
].rdev
;
1541 if (printk_ratelimit())
1542 printk(KERN_ERR
"raid1: %s: redirecting sector %llu to"
1543 " another mirror\n",
1544 bdevname(rdev
->bdev
,b
),
1545 (unsigned long long)r1_bio
->sector
);
1546 bio
->bi_sector
= r1_bio
->sector
+ rdev
->data_offset
;
1547 bio
->bi_bdev
= rdev
->bdev
;
1548 bio
->bi_end_io
= raid1_end_read_request
;
1550 bio
->bi_private
= r1_bio
;
1552 generic_make_request(bio
);
1556 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1558 unplug_slaves(mddev
);
1562 static int init_resync(conf_t
*conf
)
1566 buffs
= RESYNC_WINDOW
/ RESYNC_BLOCK_SIZE
;
1567 BUG_ON(conf
->r1buf_pool
);
1568 conf
->r1buf_pool
= mempool_create(buffs
, r1buf_pool_alloc
, r1buf_pool_free
,
1570 if (!conf
->r1buf_pool
)
1572 conf
->next_resync
= 0;
1577 * perform a "sync" on one "block"
1579 * We need to make sure that no normal I/O request - particularly write
1580 * requests - conflict with active sync requests.
1582 * This is achieved by tracking pending requests and a 'barrier' concept
1583 * that can be installed to exclude normal IO requests.
1586 static sector_t
sync_request(mddev_t
*mddev
, sector_t sector_nr
, int *skipped
, int go_faster
)
1588 conf_t
*conf
= mddev_to_conf(mddev
);
1591 sector_t max_sector
, nr_sectors
;
1595 int write_targets
= 0, read_targets
= 0;
1597 int still_degraded
= 0;
1599 if (!conf
->r1buf_pool
)
1602 printk("sync start - bitmap %p\n", mddev->bitmap);
1604 if (init_resync(conf
))
1608 max_sector
= mddev
->size
<< 1;
1609 if (sector_nr
>= max_sector
) {
1610 /* If we aborted, we need to abort the
1611 * sync on the 'current' bitmap chunk (there will
1612 * only be one in raid1 resync.
1613 * We can find the current addess in mddev->curr_resync
1615 if (mddev
->curr_resync
< max_sector
) /* aborted */
1616 bitmap_end_sync(mddev
->bitmap
, mddev
->curr_resync
,
1618 else /* completed sync */
1621 bitmap_close_sync(mddev
->bitmap
);
1626 /* before building a request, check if we can skip these blocks..
1627 * This call the bitmap_start_sync doesn't actually record anything
1629 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
, &sync_blocks
, 1) &&
1630 !conf
->fullsync
&& !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1631 /* We can skip this block, and probably several more */
1636 * If there is non-resync activity waiting for a turn,
1637 * and resync is going fast enough,
1638 * then let it though before starting on this new sync request.
1640 if (!go_faster
&& conf
->nr_waiting
)
1641 msleep_interruptible(1000);
1643 raise_barrier(conf
);
1645 conf
->next_resync
= sector_nr
;
1647 r1_bio
= mempool_alloc(conf
->r1buf_pool
, GFP_NOIO
);
1650 * If we get a correctably read error during resync or recovery,
1651 * we might want to read from a different device. So we
1652 * flag all drives that could conceivably be read from for READ,
1653 * and any others (which will be non-In_sync devices) for WRITE.
1654 * If a read fails, we try reading from something else for which READ
1658 r1_bio
->mddev
= mddev
;
1659 r1_bio
->sector
= sector_nr
;
1661 set_bit(R1BIO_IsSync
, &r1_bio
->state
);
1663 for (i
=0; i
< conf
->raid_disks
; i
++) {
1665 bio
= r1_bio
->bios
[i
];
1667 /* take from bio_init */
1668 bio
->bi_next
= NULL
;
1669 bio
->bi_flags
|= 1 << BIO_UPTODATE
;
1673 bio
->bi_phys_segments
= 0;
1674 bio
->bi_hw_segments
= 0;
1676 bio
->bi_end_io
= NULL
;
1677 bio
->bi_private
= NULL
;
1679 rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
1681 test_bit(Faulty
, &rdev
->flags
)) {
1684 } else if (!test_bit(In_sync
, &rdev
->flags
)) {
1686 bio
->bi_end_io
= end_sync_write
;
1689 /* may need to read from here */
1691 bio
->bi_end_io
= end_sync_read
;
1692 if (test_bit(WriteMostly
, &rdev
->flags
)) {
1701 atomic_inc(&rdev
->nr_pending
);
1702 bio
->bi_sector
= sector_nr
+ rdev
->data_offset
;
1703 bio
->bi_bdev
= rdev
->bdev
;
1704 bio
->bi_private
= r1_bio
;
1709 r1_bio
->read_disk
= disk
;
1711 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) && read_targets
> 0)
1712 /* extra read targets are also write targets */
1713 write_targets
+= read_targets
-1;
1715 if (write_targets
== 0 || read_targets
== 0) {
1716 /* There is nowhere to write, so all non-sync
1717 * drives must be failed - so we are finished
1719 sector_t rv
= max_sector
- sector_nr
;
1729 int len
= PAGE_SIZE
;
1730 if (sector_nr
+ (len
>>9) > max_sector
)
1731 len
= (max_sector
- sector_nr
) << 9;
1734 if (sync_blocks
== 0) {
1735 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
,
1736 &sync_blocks
, still_degraded
) &&
1738 !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
))
1740 BUG_ON(sync_blocks
< (PAGE_SIZE
>>9));
1741 if (len
> (sync_blocks
<<9))
1742 len
= sync_blocks
<<9;
1745 for (i
=0 ; i
< conf
->raid_disks
; i
++) {
1746 bio
= r1_bio
->bios
[i
];
1747 if (bio
->bi_end_io
) {
1748 page
= bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
;
1749 if (bio_add_page(bio
, page
, len
, 0) == 0) {
1751 bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
= page
;
1754 bio
= r1_bio
->bios
[i
];
1755 if (bio
->bi_end_io
==NULL
)
1757 /* remove last page from this bio */
1759 bio
->bi_size
-= len
;
1760 bio
->bi_flags
&= ~(1<< BIO_SEG_VALID
);
1766 nr_sectors
+= len
>>9;
1767 sector_nr
+= len
>>9;
1768 sync_blocks
-= (len
>>9);
1769 } while (r1_bio
->bios
[disk
]->bi_vcnt
< RESYNC_PAGES
);
1771 r1_bio
->sectors
= nr_sectors
;
1773 /* For a user-requested sync, we read all readable devices and do a
1776 if (test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
)) {
1777 atomic_set(&r1_bio
->remaining
, read_targets
);
1778 for (i
=0; i
<conf
->raid_disks
; i
++) {
1779 bio
= r1_bio
->bios
[i
];
1780 if (bio
->bi_end_io
== end_sync_read
) {
1781 md_sync_acct(conf
->mirrors
[i
].rdev
->bdev
, nr_sectors
);
1782 generic_make_request(bio
);
1786 atomic_set(&r1_bio
->remaining
, 1);
1787 bio
= r1_bio
->bios
[r1_bio
->read_disk
];
1788 md_sync_acct(conf
->mirrors
[r1_bio
->read_disk
].rdev
->bdev
,
1790 generic_make_request(bio
);
1797 static int run(mddev_t
*mddev
)
1801 mirror_info_t
*disk
;
1803 struct list_head
*tmp
;
1805 if (mddev
->level
!= 1) {
1806 printk("raid1: %s: raid level not set to mirroring (%d)\n",
1807 mdname(mddev
), mddev
->level
);
1810 if (mddev
->reshape_position
!= MaxSector
) {
1811 printk("raid1: %s: reshape_position set but not supported\n",
1816 * copy the already verified devices into our private RAID1
1817 * bookkeeping area. [whatever we allocate in run(),
1818 * should be freed in stop()]
1820 conf
= kzalloc(sizeof(conf_t
), GFP_KERNEL
);
1821 mddev
->private = conf
;
1825 conf
->mirrors
= kzalloc(sizeof(struct mirror_info
)*mddev
->raid_disks
,
1830 conf
->tmppage
= alloc_page(GFP_KERNEL
);
1834 conf
->poolinfo
= kmalloc(sizeof(*conf
->poolinfo
), GFP_KERNEL
);
1835 if (!conf
->poolinfo
)
1837 conf
->poolinfo
->mddev
= mddev
;
1838 conf
->poolinfo
->raid_disks
= mddev
->raid_disks
;
1839 conf
->r1bio_pool
= mempool_create(NR_RAID1_BIOS
, r1bio_pool_alloc
,
1842 if (!conf
->r1bio_pool
)
1845 ITERATE_RDEV(mddev
, rdev
, tmp
) {
1846 disk_idx
= rdev
->raid_disk
;
1847 if (disk_idx
>= mddev
->raid_disks
1850 disk
= conf
->mirrors
+ disk_idx
;
1854 blk_queue_stack_limits(mddev
->queue
,
1855 rdev
->bdev
->bd_disk
->queue
);
1856 /* as we don't honour merge_bvec_fn, we must never risk
1857 * violating it, so limit ->max_sector to one PAGE, as
1858 * a one page request is never in violation.
1860 if (rdev
->bdev
->bd_disk
->queue
->merge_bvec_fn
&&
1861 mddev
->queue
->max_sectors
> (PAGE_SIZE
>>9))
1862 blk_queue_max_sectors(mddev
->queue
, PAGE_SIZE
>>9);
1864 disk
->head_position
= 0;
1865 if (!test_bit(Faulty
, &rdev
->flags
) && test_bit(In_sync
, &rdev
->flags
))
1866 conf
->working_disks
++;
1868 conf
->raid_disks
= mddev
->raid_disks
;
1869 conf
->mddev
= mddev
;
1870 spin_lock_init(&conf
->device_lock
);
1871 INIT_LIST_HEAD(&conf
->retry_list
);
1872 if (conf
->working_disks
== 1)
1873 mddev
->recovery_cp
= MaxSector
;
1875 spin_lock_init(&conf
->resync_lock
);
1876 init_waitqueue_head(&conf
->wait_barrier
);
1878 bio_list_init(&conf
->pending_bio_list
);
1879 bio_list_init(&conf
->flushing_bio_list
);
1881 if (!conf
->working_disks
) {
1882 printk(KERN_ERR
"raid1: no operational mirrors for %s\n",
1887 mddev
->degraded
= 0;
1888 for (i
= 0; i
< conf
->raid_disks
; i
++) {
1890 disk
= conf
->mirrors
+ i
;
1893 disk
->head_position
= 0;
1899 * find the first working one and use it as a starting point
1900 * to read balancing.
1902 for (j
= 0; j
< conf
->raid_disks
&&
1903 (!conf
->mirrors
[j
].rdev
||
1904 !test_bit(In_sync
, &conf
->mirrors
[j
].rdev
->flags
)) ; j
++)
1906 conf
->last_used
= j
;
1909 mddev
->thread
= md_register_thread(raid1d
, mddev
, "%s_raid1");
1910 if (!mddev
->thread
) {
1912 "raid1: couldn't allocate thread for %s\n",
1918 "raid1: raid set %s active with %d out of %d mirrors\n",
1919 mdname(mddev
), mddev
->raid_disks
- mddev
->degraded
,
1922 * Ok, everything is just fine now
1924 mddev
->array_size
= mddev
->size
;
1926 mddev
->queue
->unplug_fn
= raid1_unplug
;
1927 mddev
->queue
->issue_flush_fn
= raid1_issue_flush
;
1932 printk(KERN_ERR
"raid1: couldn't allocate memory for %s\n",
1937 if (conf
->r1bio_pool
)
1938 mempool_destroy(conf
->r1bio_pool
);
1939 kfree(conf
->mirrors
);
1940 safe_put_page(conf
->tmppage
);
1941 kfree(conf
->poolinfo
);
1943 mddev
->private = NULL
;
1949 static int stop(mddev_t
*mddev
)
1951 conf_t
*conf
= mddev_to_conf(mddev
);
1952 struct bitmap
*bitmap
= mddev
->bitmap
;
1953 int behind_wait
= 0;
1955 /* wait for behind writes to complete */
1956 while (bitmap
&& atomic_read(&bitmap
->behind_writes
) > 0) {
1958 printk(KERN_INFO
"raid1: behind writes in progress on device %s, waiting to stop (%d)\n", mdname(mddev
), behind_wait
);
1959 set_current_state(TASK_UNINTERRUPTIBLE
);
1960 schedule_timeout(HZ
); /* wait a second */
1961 /* need to kick something here to make sure I/O goes? */
1964 md_unregister_thread(mddev
->thread
);
1965 mddev
->thread
= NULL
;
1966 blk_sync_queue(mddev
->queue
); /* the unplug fn references 'conf'*/
1967 if (conf
->r1bio_pool
)
1968 mempool_destroy(conf
->r1bio_pool
);
1969 kfree(conf
->mirrors
);
1970 kfree(conf
->poolinfo
);
1972 mddev
->private = NULL
;
1976 static int raid1_resize(mddev_t
*mddev
, sector_t sectors
)
1978 /* no resync is happening, and there is enough space
1979 * on all devices, so we can resize.
1980 * We need to make sure resync covers any new space.
1981 * If the array is shrinking we should possibly wait until
1982 * any io in the removed space completes, but it hardly seems
1985 mddev
->array_size
= sectors
>>1;
1986 set_capacity(mddev
->gendisk
, mddev
->array_size
<< 1);
1988 if (mddev
->array_size
> mddev
->size
&& mddev
->recovery_cp
== MaxSector
) {
1989 mddev
->recovery_cp
= mddev
->size
<< 1;
1990 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
1992 mddev
->size
= mddev
->array_size
;
1993 mddev
->resync_max_sectors
= sectors
;
1997 static int raid1_reshape(mddev_t
*mddev
)
2000 * 1/ resize the r1bio_pool
2001 * 2/ resize conf->mirrors
2003 * We allocate a new r1bio_pool if we can.
2004 * Then raise a device barrier and wait until all IO stops.
2005 * Then resize conf->mirrors and swap in the new r1bio pool.
2007 * At the same time, we "pack" the devices so that all the missing
2008 * devices have the higher raid_disk numbers.
2010 mempool_t
*newpool
, *oldpool
;
2011 struct pool_info
*newpoolinfo
;
2012 mirror_info_t
*newmirrors
;
2013 conf_t
*conf
= mddev_to_conf(mddev
);
2014 int cnt
, raid_disks
;
2018 /* Cannot change chunk_size, layout, or level */
2019 if (mddev
->chunk_size
!= mddev
->new_chunk
||
2020 mddev
->layout
!= mddev
->new_layout
||
2021 mddev
->level
!= mddev
->new_level
) {
2022 mddev
->new_chunk
= mddev
->chunk_size
;
2023 mddev
->new_layout
= mddev
->layout
;
2024 mddev
->new_level
= mddev
->level
;
2028 raid_disks
= mddev
->raid_disks
+ mddev
->delta_disks
;
2030 if (raid_disks
< conf
->raid_disks
) {
2032 for (d
= 0; d
< conf
->raid_disks
; d
++)
2033 if (conf
->mirrors
[d
].rdev
)
2035 if (cnt
> raid_disks
)
2039 newpoolinfo
= kmalloc(sizeof(*newpoolinfo
), GFP_KERNEL
);
2042 newpoolinfo
->mddev
= mddev
;
2043 newpoolinfo
->raid_disks
= raid_disks
;
2045 newpool
= mempool_create(NR_RAID1_BIOS
, r1bio_pool_alloc
,
2046 r1bio_pool_free
, newpoolinfo
);
2051 newmirrors
= kzalloc(sizeof(struct mirror_info
) * raid_disks
, GFP_KERNEL
);
2054 mempool_destroy(newpool
);
2058 raise_barrier(conf
);
2060 /* ok, everything is stopped */
2061 oldpool
= conf
->r1bio_pool
;
2062 conf
->r1bio_pool
= newpool
;
2064 for (d
=d2
=0; d
< conf
->raid_disks
; d
++)
2065 if (conf
->mirrors
[d
].rdev
) {
2066 conf
->mirrors
[d
].rdev
->raid_disk
= d2
;
2067 newmirrors
[d2
++].rdev
= conf
->mirrors
[d
].rdev
;
2069 kfree(conf
->mirrors
);
2070 conf
->mirrors
= newmirrors
;
2071 kfree(conf
->poolinfo
);
2072 conf
->poolinfo
= newpoolinfo
;
2074 mddev
->degraded
+= (raid_disks
- conf
->raid_disks
);
2075 conf
->raid_disks
= mddev
->raid_disks
= raid_disks
;
2076 mddev
->delta_disks
= 0;
2078 conf
->last_used
= 0; /* just make sure it is in-range */
2079 lower_barrier(conf
);
2081 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
2082 md_wakeup_thread(mddev
->thread
);
2084 mempool_destroy(oldpool
);
2088 static void raid1_quiesce(mddev_t
*mddev
, int state
)
2090 conf_t
*conf
= mddev_to_conf(mddev
);
2094 raise_barrier(conf
);
2097 lower_barrier(conf
);
2103 static struct mdk_personality raid1_personality
=
2107 .owner
= THIS_MODULE
,
2108 .make_request
= make_request
,
2112 .error_handler
= error
,
2113 .hot_add_disk
= raid1_add_disk
,
2114 .hot_remove_disk
= raid1_remove_disk
,
2115 .spare_active
= raid1_spare_active
,
2116 .sync_request
= sync_request
,
2117 .resize
= raid1_resize
,
2118 .check_reshape
= raid1_reshape
,
2119 .quiesce
= raid1_quiesce
,
2122 static int __init
raid_init(void)
2124 return register_md_personality(&raid1_personality
);
2127 static void raid_exit(void)
2129 unregister_md_personality(&raid1_personality
);
2132 module_init(raid_init
);
2133 module_exit(raid_exit
);
2134 MODULE_LICENSE("GPL");
2135 MODULE_ALIAS("md-personality-3"); /* RAID1 */
2136 MODULE_ALIAS("md-raid1");
2137 MODULE_ALIAS("md-level-1");