[NET]: Move hardware header operations out of netdevice.
[linux-2.6/kmemtrace.git] / drivers / net / wan / hdlc_cisco.c
blob038a6e748bbffdcfdd39bca117709f65f5510bb0
1 /*
2 * Generic HDLC support routines for Linux
3 * Cisco HDLC support
5 * Copyright (C) 2000 - 2006 Krzysztof Halasa <khc@pm.waw.pl>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of version 2 of the GNU General Public License
9 * as published by the Free Software Foundation.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/slab.h>
15 #include <linux/poll.h>
16 #include <linux/errno.h>
17 #include <linux/if_arp.h>
18 #include <linux/init.h>
19 #include <linux/skbuff.h>
20 #include <linux/pkt_sched.h>
21 #include <linux/inetdevice.h>
22 #include <linux/lapb.h>
23 #include <linux/rtnetlink.h>
24 #include <linux/hdlc.h>
26 #undef DEBUG_HARD_HEADER
28 #define CISCO_MULTICAST 0x8F /* Cisco multicast address */
29 #define CISCO_UNICAST 0x0F /* Cisco unicast address */
30 #define CISCO_KEEPALIVE 0x8035 /* Cisco keepalive protocol */
31 #define CISCO_SYS_INFO 0x2000 /* Cisco interface/system info */
32 #define CISCO_ADDR_REQ 0 /* Cisco address request */
33 #define CISCO_ADDR_REPLY 1 /* Cisco address reply */
34 #define CISCO_KEEPALIVE_REQ 2 /* Cisco keepalive request */
37 struct hdlc_header {
38 u8 address;
39 u8 control;
40 __be16 protocol;
41 }__attribute__ ((packed));
44 struct cisco_packet {
45 __be32 type; /* code */
46 __be32 par1;
47 __be32 par2;
48 __be16 rel; /* reliability */
49 __be32 time;
50 }__attribute__ ((packed));
51 #define CISCO_PACKET_LEN 18
52 #define CISCO_BIG_PACKET_LEN 20
55 struct cisco_state {
56 cisco_proto settings;
58 struct timer_list timer;
59 unsigned long last_poll;
60 int up;
61 int request_sent;
62 u32 txseq; /* TX sequence number */
63 u32 rxseq; /* RX sequence number */
67 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr);
70 static inline struct cisco_state * state(hdlc_device *hdlc)
72 return(struct cisco_state *)(hdlc->state);
76 static int cisco_hard_header(struct sk_buff *skb, struct net_device *dev,
77 u16 type, const void *daddr, const void *saddr,
78 unsigned int len)
80 struct hdlc_header *data;
81 #ifdef DEBUG_HARD_HEADER
82 printk(KERN_DEBUG "%s: cisco_hard_header called\n", dev->name);
83 #endif
85 skb_push(skb, sizeof(struct hdlc_header));
86 data = (struct hdlc_header*)skb->data;
87 if (type == CISCO_KEEPALIVE)
88 data->address = CISCO_MULTICAST;
89 else
90 data->address = CISCO_UNICAST;
91 data->control = 0;
92 data->protocol = htons(type);
94 return sizeof(struct hdlc_header);
99 static void cisco_keepalive_send(struct net_device *dev, u32 type,
100 __be32 par1, __be32 par2)
102 struct sk_buff *skb;
103 struct cisco_packet *data;
105 skb = dev_alloc_skb(sizeof(struct hdlc_header) +
106 sizeof(struct cisco_packet));
107 if (!skb) {
108 printk(KERN_WARNING
109 "%s: Memory squeeze on cisco_keepalive_send()\n",
110 dev->name);
111 return;
113 skb_reserve(skb, 4);
114 cisco_hard_header(skb, dev, CISCO_KEEPALIVE, NULL, NULL, 0);
115 data = (struct cisco_packet*)(skb->data + 4);
117 data->type = htonl(type);
118 data->par1 = par1;
119 data->par2 = par2;
120 data->rel = __constant_htons(0xFFFF);
121 /* we will need do_div here if 1000 % HZ != 0 */
122 data->time = htonl((jiffies - INITIAL_JIFFIES) * (1000 / HZ));
124 skb_put(skb, sizeof(struct cisco_packet));
125 skb->priority = TC_PRIO_CONTROL;
126 skb->dev = dev;
127 skb_reset_network_header(skb);
129 dev_queue_xmit(skb);
134 static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
136 struct hdlc_header *data = (struct hdlc_header*)skb->data;
138 if (skb->len < sizeof(struct hdlc_header))
139 return __constant_htons(ETH_P_HDLC);
141 if (data->address != CISCO_MULTICAST &&
142 data->address != CISCO_UNICAST)
143 return __constant_htons(ETH_P_HDLC);
145 switch(data->protocol) {
146 case __constant_htons(ETH_P_IP):
147 case __constant_htons(ETH_P_IPX):
148 case __constant_htons(ETH_P_IPV6):
149 skb_pull(skb, sizeof(struct hdlc_header));
150 return data->protocol;
151 default:
152 return __constant_htons(ETH_P_HDLC);
157 static int cisco_rx(struct sk_buff *skb)
159 struct net_device *dev = skb->dev;
160 hdlc_device *hdlc = dev_to_hdlc(dev);
161 struct hdlc_header *data = (struct hdlc_header*)skb->data;
162 struct cisco_packet *cisco_data;
163 struct in_device *in_dev;
164 __be32 addr, mask;
166 if (skb->len < sizeof(struct hdlc_header))
167 goto rx_error;
169 if (data->address != CISCO_MULTICAST &&
170 data->address != CISCO_UNICAST)
171 goto rx_error;
173 switch(ntohs(data->protocol)) {
174 case CISCO_SYS_INFO:
175 /* Packet is not needed, drop it. */
176 dev_kfree_skb_any(skb);
177 return NET_RX_SUCCESS;
179 case CISCO_KEEPALIVE:
180 if ((skb->len != sizeof(struct hdlc_header) +
181 CISCO_PACKET_LEN) &&
182 (skb->len != sizeof(struct hdlc_header) +
183 CISCO_BIG_PACKET_LEN)) {
184 printk(KERN_INFO "%s: Invalid length of Cisco control"
185 " packet (%d bytes)\n", dev->name, skb->len);
186 goto rx_error;
189 cisco_data = (struct cisco_packet*)(skb->data + sizeof
190 (struct hdlc_header));
192 switch(ntohl (cisco_data->type)) {
193 case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */
194 in_dev = dev->ip_ptr;
195 addr = 0;
196 mask = __constant_htonl(~0); /* is the mask correct? */
198 if (in_dev != NULL) {
199 struct in_ifaddr **ifap = &in_dev->ifa_list;
201 while (*ifap != NULL) {
202 if (strcmp(dev->name,
203 (*ifap)->ifa_label) == 0) {
204 addr = (*ifap)->ifa_local;
205 mask = (*ifap)->ifa_mask;
206 break;
208 ifap = &(*ifap)->ifa_next;
211 cisco_keepalive_send(dev, CISCO_ADDR_REPLY,
212 addr, mask);
214 dev_kfree_skb_any(skb);
215 return NET_RX_SUCCESS;
217 case CISCO_ADDR_REPLY:
218 printk(KERN_INFO "%s: Unexpected Cisco IP address "
219 "reply\n", dev->name);
220 goto rx_error;
222 case CISCO_KEEPALIVE_REQ:
223 state(hdlc)->rxseq = ntohl(cisco_data->par1);
224 if (state(hdlc)->request_sent &&
225 ntohl(cisco_data->par2) == state(hdlc)->txseq) {
226 state(hdlc)->last_poll = jiffies;
227 if (!state(hdlc)->up) {
228 u32 sec, min, hrs, days;
229 sec = ntohl(cisco_data->time) / 1000;
230 min = sec / 60; sec -= min * 60;
231 hrs = min / 60; min -= hrs * 60;
232 days = hrs / 24; hrs -= days * 24;
233 printk(KERN_INFO "%s: Link up (peer "
234 "uptime %ud%uh%um%us)\n",
235 dev->name, days, hrs,
236 min, sec);
237 netif_dormant_off(dev);
238 state(hdlc)->up = 1;
242 dev_kfree_skb_any(skb);
243 return NET_RX_SUCCESS;
244 } /* switch(keepalive type) */
245 } /* switch(protocol) */
247 printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name,
248 ntohs(data->protocol));
249 dev_kfree_skb_any(skb);
250 return NET_RX_DROP;
252 rx_error:
253 dev_to_desc(dev)->stats.rx_errors++; /* Mark error */
254 dev_kfree_skb_any(skb);
255 return NET_RX_DROP;
260 static void cisco_timer(unsigned long arg)
262 struct net_device *dev = (struct net_device *)arg;
263 hdlc_device *hdlc = dev_to_hdlc(dev);
265 if (state(hdlc)->up &&
266 time_after(jiffies, state(hdlc)->last_poll +
267 state(hdlc)->settings.timeout * HZ)) {
268 state(hdlc)->up = 0;
269 printk(KERN_INFO "%s: Link down\n", dev->name);
270 netif_dormant_on(dev);
273 cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
274 htonl(++state(hdlc)->txseq),
275 htonl(state(hdlc)->rxseq));
276 state(hdlc)->request_sent = 1;
277 state(hdlc)->timer.expires = jiffies +
278 state(hdlc)->settings.interval * HZ;
279 state(hdlc)->timer.function = cisco_timer;
280 state(hdlc)->timer.data = arg;
281 add_timer(&state(hdlc)->timer);
286 static void cisco_start(struct net_device *dev)
288 hdlc_device *hdlc = dev_to_hdlc(dev);
289 state(hdlc)->up = 0;
290 state(hdlc)->request_sent = 0;
291 state(hdlc)->txseq = state(hdlc)->rxseq = 0;
293 init_timer(&state(hdlc)->timer);
294 state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/
295 state(hdlc)->timer.function = cisco_timer;
296 state(hdlc)->timer.data = (unsigned long)dev;
297 add_timer(&state(hdlc)->timer);
302 static void cisco_stop(struct net_device *dev)
304 hdlc_device *hdlc = dev_to_hdlc(dev);
305 del_timer_sync(&state(hdlc)->timer);
306 netif_dormant_on(dev);
307 state(hdlc)->up = 0;
308 state(hdlc)->request_sent = 0;
312 static struct hdlc_proto proto = {
313 .start = cisco_start,
314 .stop = cisco_stop,
315 .type_trans = cisco_type_trans,
316 .ioctl = cisco_ioctl,
317 .module = THIS_MODULE,
320 static const struct header_ops cisco_header_ops = {
321 .create = cisco_hard_header,
324 static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
326 cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco;
327 const size_t size = sizeof(cisco_proto);
328 cisco_proto new_settings;
329 hdlc_device *hdlc = dev_to_hdlc(dev);
330 int result;
332 switch (ifr->ifr_settings.type) {
333 case IF_GET_PROTO:
334 if (dev_to_hdlc(dev)->proto != &proto)
335 return -EINVAL;
336 ifr->ifr_settings.type = IF_PROTO_CISCO;
337 if (ifr->ifr_settings.size < size) {
338 ifr->ifr_settings.size = size; /* data size wanted */
339 return -ENOBUFS;
341 if (copy_to_user(cisco_s, &state(hdlc)->settings, size))
342 return -EFAULT;
343 return 0;
345 case IF_PROTO_CISCO:
346 if(!capable(CAP_NET_ADMIN))
347 return -EPERM;
349 if(dev->flags & IFF_UP)
350 return -EBUSY;
352 if (copy_from_user(&new_settings, cisco_s, size))
353 return -EFAULT;
355 if (new_settings.interval < 1 ||
356 new_settings.timeout < 2)
357 return -EINVAL;
359 result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
360 if (result)
361 return result;
363 result = attach_hdlc_protocol(dev, &proto, cisco_rx,
364 sizeof(struct cisco_state));
365 if (result)
366 return result;
368 memcpy(&state(hdlc)->settings, &new_settings, size);
369 dev->hard_start_xmit = hdlc->xmit;
370 dev->header_ops = &cisco_header_ops;
371 dev->type = ARPHRD_CISCO;
372 netif_dormant_on(dev);
373 return 0;
376 return -EINVAL;
380 static int __init mod_init(void)
382 register_hdlc_protocol(&proto);
383 return 0;
388 static void __exit mod_exit(void)
390 unregister_hdlc_protocol(&proto);
394 module_init(mod_init);
395 module_exit(mod_exit);
397 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
398 MODULE_DESCRIPTION("Cisco HDLC protocol support for generic HDLC");
399 MODULE_LICENSE("GPL v2");