1 #ifndef _LINUX_ISICOM_H
2 #define _LINUX_ISICOM_H
4 /*#define ISICOM_DEBUG*/
5 /*#define ISICOM_DEBUG_DTR_RTS*/
9 * Firmware Loader definitions ...
12 #define __MultiTech ('M'<<8)
13 #define MIOCTL_LOAD_FIRMWARE (__MultiTech | 0x01)
14 #define MIOCTL_READ_FIRMWARE (__MultiTech | 0x02)
15 #define MIOCTL_XFER_CTRL (__MultiTech | 0x03)
16 #define MIOCTL_RESET_CARD (__MultiTech | 0x04)
21 unsigned short exec_segment
;
22 unsigned short exec_addr
;
26 int board
; /* Board to load */
32 int board
; /* Board to load */
35 unsigned short segment
;
36 unsigned char bin_data
[DATA_SIZE
];
44 #define ISILOAD_MISC_MINOR 155 /* /dev/isctl */
45 #define ISILOAD_NAME "ISILoad"
48 * ISICOM Driver definitions ...
52 #define ISICOM_NAME "ISICom"
59 #define VENDOR_ID 0x10b5
62 * These are now officially allocated numbers
65 #define ISICOM_NMAJOR 112 /* normal */
66 #define ISICOM_CMAJOR 113 /* callout */
67 #define ISICOM_MAGIC (('M' << 8) | 'T')
69 #define WAKEUP_CHARS 256 /* hard coded for now */
73 #define PORT_COUNT (BOARD_COUNT*16)
75 #define SERIAL_TYPE_NORMAL 1
79 #define ISICOM_CS5 0x0000
80 #define ISICOM_CS6 0x0001
81 #define ISICOM_CS7 0x0002
82 #define ISICOM_CS8 0x0003
86 #define ISICOM_1SB 0x0000
87 #define ISICOM_2SB 0x0004
91 #define ISICOM_NOPAR 0x0000
92 #define ISICOM_ODPAR 0x0008
93 #define ISICOM_EVPAR 0x0018
97 #define ISICOM_CTSRTS 0x03
98 #define ISICOM_INITIATE_XONXOFF 0x04
99 #define ISICOM_RESPOND_XONXOFF 0x08
101 #define InterruptTheCard(base) (outw(0,(base)+0xc))
102 #define ClearInterrupt(base) (inw((base)+0x0a))
104 #define BOARD(line) (((line) >> 4) & 0x3)
105 #define MIN(a, b) ( (a) < (b) ? (a) : (b) )
107 /* isi kill queue bitmap */
109 #define ISICOM_KILLTX 0x01
110 #define ISICOM_KILLRX 0x02
112 /* isi_board status bitmap */
114 #define FIRMWARE_LOADED 0x0001
115 #define BOARD_ACTIVE 0x0002
117 /* isi_port status bitmap */
119 #define ISI_CTS 0x1000
120 #define ISI_DSR 0x2000
121 #define ISI_RI 0x4000
122 #define ISI_DCD 0x8000
123 #define ISI_DTR 0x0100
124 #define ISI_RTS 0x0200
127 #define ISI_TXOK 0x0001
132 unsigned char port_count
;
133 unsigned short status
;
134 unsigned short port_status
; /* each bit represents a single port */
135 unsigned short shift_count
;
136 struct isi_port
* ports
;
142 unsigned short magic
;
147 unsigned short channel
;
148 unsigned short status
;
149 unsigned short closing_wait
;
150 struct isi_board
* card
;
151 struct tty_struct
* tty
;
152 wait_queue_head_t close_wait
;
153 wait_queue_head_t open_wait
;
154 struct work_struct hangup_tq
;
155 struct work_struct bh_tqueue
;
156 unsigned char * xmit_buf
;
164 * ISI Card specific ops ...
167 static inline void raise_dtr(struct isi_port
* port
)
169 struct isi_board
* card
= port
->card
;
170 unsigned short base
= card
->base
;
171 unsigned char channel
= port
->channel
;
173 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
175 printk(KERN_WARNING
"ISICOM: Card found busy in raise_dtr.\n");
178 #ifdef ISICOM_DEBUG_DTR_RTS
179 printk(KERN_DEBUG
"ISICOM: raise_dtr.\n");
181 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
183 InterruptTheCard(base
);
184 port
->status
|= ISI_DTR
;
187 static inline void drop_dtr(struct isi_port
* port
)
189 struct isi_board
* card
= port
->card
;
190 unsigned short base
= card
->base
;
191 unsigned char channel
= port
->channel
;
193 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
195 printk(KERN_WARNING
"ISICOM: Card found busy in drop_dtr.\n");
198 #ifdef ISICOM_DEBUG_DTR_RTS
199 printk(KERN_DEBUG
"ISICOM: drop_dtr.\n");
201 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
203 InterruptTheCard(base
);
204 port
->status
&= ~ISI_DTR
;
206 static inline void raise_rts(struct isi_port
* port
)
208 struct isi_board
* card
= port
->card
;
209 unsigned short base
= card
->base
;
210 unsigned char channel
= port
->channel
;
212 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
214 printk(KERN_WARNING
"ISICOM: Card found busy in raise_rts.\n");
217 #ifdef ISICOM_DEBUG_DTR_RTS
218 printk(KERN_DEBUG
"ISICOM: raise_rts.\n");
220 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
222 InterruptTheCard(base
);
223 port
->status
|= ISI_RTS
;
225 static inline void drop_rts(struct isi_port
* port
)
227 struct isi_board
* card
= port
->card
;
228 unsigned short base
= card
->base
;
229 unsigned char channel
= port
->channel
;
231 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
233 printk(KERN_WARNING
"ISICOM: Card found busy in drop_rts.\n");
236 #ifdef ISICOM_DEBUG_DTR_RTS
237 printk(KERN_DEBUG
"ISICOM: drop_rts.\n");
239 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
241 InterruptTheCard(base
);
242 port
->status
&= ~ISI_RTS
;
244 static inline void raise_dtr_rts(struct isi_port
* port
)
246 struct isi_board
* card
= port
->card
;
247 unsigned short base
= card
->base
;
248 unsigned char channel
= port
->channel
;
250 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
252 printk(KERN_WARNING
"ISICOM: Card found busy in raise_dtr_rts.\n");
255 #ifdef ISICOM_DEBUG_DTR_RTS
256 printk(KERN_DEBUG
"ISICOM: raise_dtr_rts.\n");
258 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
260 InterruptTheCard(base
);
261 port
->status
|= (ISI_DTR
| ISI_RTS
);
263 static inline void drop_dtr_rts(struct isi_port
* port
)
265 struct isi_board
* card
= port
->card
;
266 unsigned short base
= card
->base
;
267 unsigned char channel
= port
->channel
;
269 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
271 printk(KERN_WARNING
"ISICOM: Card found busy in drop_dtr_rts.\n");
274 #ifdef ISICOM_DEBUG_DTR_RTS
275 printk(KERN_DEBUG
"ISICOM: drop_dtr_rts.\n");
277 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
279 InterruptTheCard(base
);
280 port
->status
&= ~(ISI_RTS
| ISI_DTR
);
283 static inline void kill_queue(struct isi_port
* port
, short queue
)
285 struct isi_board
* card
= port
->card
;
286 unsigned short base
= card
->base
;
287 unsigned char channel
= port
->channel
;
289 while(((inw(base
+0x0e) & 0x01) == 0) && (wait
-- > 0));
291 printk(KERN_WARNING
"ISICOM: Card found busy in kill_queue.\n");
295 printk(KERN_DEBUG
"ISICOM: kill_queue 0x%x.\n", queue
);
297 outw(0x8000 | (channel
<< card
->shift_count
) | 0x02 , base
);
298 outw((queue
<< 8) | 0x06, base
);
299 InterruptTheCard(base
);
302 #endif /* __KERNEL__ */
304 #endif /* ISICOM_H */