7 # To see a list of typical targets execute "make help"
8 # More info can be located in ./README
9 # Comments in this file are targeted only to the developer, do not
10 # expect to learn how to build the kernel reading this file.
12 # Do not print "Entering directory ..."
13 MAKEFLAGS
+= --no-print-directory
15 # We are using a recursive build, so we need to do a little thinking
16 # to get the ordering right.
18 # Most importantly: sub-Makefiles should only ever modify files in
19 # their own directory. If in some directory we have a dependency on
20 # a file in another dir (which doesn't happen often, but it's of
21 # unavoidable when linking the built-in.o targets which finally
22 # turn into vmlinux), we will call a sub make in that other dir, and
23 # after that we are sure that everything which is in that other dir
26 # The only cases where we need to modify files which have global
27 # effects are thus separated out and done before the recursive
28 # descending is started. They are now explicitly listed as the
31 # To put more focus on warnings, be less verbose as default
32 # Use 'make V=1' to see the full commands
35 ifeq ("$(origin V)", "command line")
43 # Call sparse as part of compilation of C files
44 # Use 'make C=1' to enable sparse checking
47 ifeq ("$(origin C)", "command line")
48 KBUILD_CHECKSRC
= $(C
)
51 ifndef KBUILD_CHECKSRC
55 # kbuild supports saving output files in a separate directory.
56 # To locate output files in a separate directory two syntax'es are supported.
57 # In both cases the working directory must be the root of the kernel src.
59 # Use "make O=dir/to/store/output/files/"
61 # 2) Set KBUILD_OUTPUT
62 # Set the environment variable KBUILD_OUTPUT to point to the directory
63 # where the output files shall be placed.
64 # export KBUILD_OUTPUT=dir/to/store/output/files/
67 # The O= assigment takes precedence over the KBUILD_OUTPUT environment variable.
70 # KBUILD_SRC is set on invocation of make in OBJ directory
71 # KBUILD_SRC is not intended to be used by the regular user (for now)
74 # OK, Make called in directory where kernel src resides
75 # Do we want to locate output files in a separate directory?
77 ifeq ("$(origin O)", "command line")
82 # That's our default target when none is given on the command line
86 ifneq ($(KBUILD_OUTPUT
),)
87 # Invoke a second make in the output directory, passing relevant variables
88 # check that the output directory actually exists
89 saved-output
:= $(KBUILD_OUTPUT
)
90 KBUILD_OUTPUT
:= $(shell cd
$(KBUILD_OUTPUT
) && /bin
/pwd
)
91 $(if
$(wildcard $(KBUILD_OUTPUT
)),, \
92 $(error output directory
"$(saved-output)" does not exist
))
94 .PHONY
: $(MAKECMDGOALS
)
96 $(filter-out all,$(MAKECMDGOALS
)) all:
97 $(if
$(KBUILD_VERBOSE
:1=),@
)$(MAKE
) -C
$(KBUILD_OUTPUT
) \
98 KBUILD_SRC
=$(CURDIR
) KBUILD_VERBOSE
=$(KBUILD_VERBOSE
) \
99 KBUILD_CHECK
=$(KBUILD_CHECK
) -f
$(CURDIR
)/Makefile
$@
101 # Leave processing to above invocation of make
103 endif # ifneq ($(KBUILD_OUTPUT),)
104 endif # ifeq ($(KBUILD_SRC),)
106 # We process the rest of the Makefile if this is the final invocation of make
107 ifeq ($(skip-makefile
),)
109 srctree
:= $(if
$(KBUILD_SRC
),$(KBUILD_SRC
),$(CURDIR
))
111 # FIXME - TOPDIR is obsolete, use srctree/objtree
118 export srctree objtree VPATH TOPDIR
120 KERNELRELEASE
=$(VERSION
).
$(PATCHLEVEL
).
$(SUBLEVEL
)$(EXTRAVERSION
)
122 # SUBARCH tells the usermode build what the underlying arch is. That is set
123 # first, and if a usermode build is happening, the "ARCH=um" on the command
124 # line overrides the setting of ARCH below. If a native build is happening,
125 # then ARCH is assigned, getting whatever value it gets normally, and
126 # SUBARCH is subsequently ignored.
128 SUBARCH
:= $(shell uname
-m | sed
-e s
/i
.86/i386
/ -e s
/sun4u
/sparc64
/ \
129 -e s
/arm.
*/arm
/ -e s
/sa110
/arm
/ \
130 -e s
/s390x
/s390
/ -e s
/parisc64
/parisc
/ )
132 # Cross compiling and selecting different set of gcc/bin-utils
133 # ---------------------------------------------------------------------------
135 # When performing cross compilation for other architectures ARCH shall be set
136 # to the target architecture. (See arch/* for the possibilities).
137 # ARCH can be set during invocation of make:
139 # Another way is to have ARCH set in the environment.
140 # The default ARCH is the host where make is executed.
142 # CROSS_COMPILE specify the prefix used for all executables used
143 # during compilation. Only gcc and related bin-utils executables
144 # are prefixed with $(CROSS_COMPILE).
145 # CROSS_COMPILE can be set on the command line
146 # make CROSS_COMPILE=ia64-linux-
147 # Alternatively CROSS_COMPILE can be set in the environment.
148 # Default value for CROSS_COMPILE is not to prefix executables
149 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
154 # Architecture as present in compile.h
155 UTS_MACHINE
:= $(ARCH
)
157 # SHELL used by kbuild
158 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
159 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
160 else echo sh
; fi
; fi
)
164 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
167 # Decide whether to build built-in, modular, or both.
168 # Normally, just do built-in.
173 # If we have only "make modules", don't compile built-in objects.
174 # When we're building modules with modversions, we need to consider
175 # the built-in objects during the descend as well, in order to
176 # make sure the checksums are uptodate before we record them.
178 ifeq ($(MAKECMDGOALS
),modules
)
179 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
182 # If we have "make <whatever> modules", compile modules
183 # in addition to whatever we do anyway.
184 # Just "make" or "make all" shall build modules as well
186 ifneq ($(filter all modules
,$(MAKECMDGOALS
)),)
190 ifeq ($(MAKECMDGOALS
),)
194 export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
195 export KBUILD_CHECKSRC KBUILD_SRC
198 # ---------------------------------------------------------------------------
200 # Normally, we echo the whole command before executing it. By making
201 # that echo $($(quiet)$(cmd)), we now have the possibility to set
202 # $(quiet) to choose other forms of output instead, e.g.
204 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
205 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
207 # If $(quiet) is empty, the whole command will be printed.
208 # If it is set to "quiet_", only the short version will be printed.
209 # If it is set to "silent_", nothing wil be printed at all, since
210 # the variable $(silent_cmd_cc_o_c) doesn't exist.
212 # A simple variant is to prefix commands with $(Q) - that's usefull
213 # for commands that shall be hidden in non-verbose mode.
217 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
218 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
220 ifeq ($(KBUILD_VERBOSE
),1)
228 # If the user is running make -s (silent mode), suppress echoing of
231 ifneq ($(findstring s
,$(MAKEFLAGS
)),)
235 check_gcc
= $(shell if
$(CC
) $(CFLAGS
) $(1) -S
-o
/dev
/null
-xc
/dev
/null
> /dev
/null
2>&1; then echo
"$(1)"; else echo
"$(2)"; fi
;)
237 export quiet Q KBUILD_VERBOSE check_gcc
239 # Look for make include files relative to root of kernel src
240 MAKEFLAGS
+= --include-dir
=$(srctree
)
242 # For maximum performance (+ possibly random breakage, uncomment
247 # Make variables (CC, etc...)
249 AS
= $(CROSS_COMPILE
)as
250 LD
= $(CROSS_COMPILE
)ld
251 CC
= $(CROSS_COMPILE
)gcc
253 AR
= $(CROSS_COMPILE
)ar
254 NM
= $(CROSS_COMPILE
)nm
255 STRIP
= $(CROSS_COMPILE
)strip
256 OBJCOPY
= $(CROSS_COMPILE
)objcopy
257 OBJDUMP
= $(CROSS_COMPILE
)objdump
259 RPM
:= $(shell if
[ -x
"/usr/bin/rpmbuild" ]; then echo rpmbuild
; \
261 GENKSYMS
= scripts
/genksyms
/genksyms
262 DEPMOD
= /sbin
/depmod
263 KALLSYMS
= scripts
/kallsyms
267 CFLAGS_MODULE
= $(MODFLAGS
)
268 AFLAGS_MODULE
= $(MODFLAGS
)
273 NOSTDINC_FLAGS
= -nostdinc
-iwithprefix
include
275 CPPFLAGS
:= -D__KERNEL__
-Iinclude \
276 $(if
$(KBUILD_SRC
),-Iinclude2
-I
$(srctree
)/include)
278 CFLAGS
:= -Wall
-Wstrict-prototypes
-Wno-trigraphs
-O2 \
279 -fno-strict-aliasing
-fno-common
280 AFLAGS
:= -D__ASSEMBLY__
282 export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
283 CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
284 CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
285 HOSTCXX HOSTCXXFLAGS LDFLAGS_BLOB LDFLAGS_MODULE CHECK
287 export CPPFLAGS NOSTDINC_FLAGS OBJCOPYFLAGS LDFLAGS
288 export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
289 export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
291 export MODVERDIR
:= .tmp_versions
293 # The temporary file to save gcc -MD generated dependencies must not
296 depfile
= $(subst $(comma
),_
,$(@D
)/.
$(@F
).d
)
298 # Files to ignore in find ... statements
300 RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o
-name CVS \
) -prune
-o
301 RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn
--exclude CVS
303 # ===========================================================================
304 # Rules shared between *config targets and build targets
306 # Helpers built in scripts/
308 scripts
/docproc scripts
/split-include
: scripts
;
310 .PHONY
: scripts scripts
/fixdep
312 $(Q
)$(MAKE
) $(build
)=scripts
315 $(Q
)$(MAKE
) $(build
)=scripts
$@
318 # To make sure we do not include .config for any of the *config targets
319 # catch them early, and hand them over to scripts/kconfig/Makefile
320 # It is allowed to specify more targets when calling make, including
321 # mixing *config targets and build targets.
322 # For example 'make oldconfig all'.
323 # Detect when mixed targets is specified, and make a second invocation
324 # of make so .config is not included in this case either (for *config).
326 no-dot-config-targets
:= clean mrproper
distclean \
327 cscope TAGS
tags help
%docs
check%
333 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
334 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
339 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
341 ifneq ($(filter-out config
%config
,$(MAKECMDGOALS
)),)
346 ifeq ($(mixed-targets
),1)
347 # ===========================================================================
348 # We're called with mixed targets (*config and build targets).
349 # Handle them one by one.
352 $(Q
)$(MAKE
) -C
$(srctree
) KBUILD_SRC
= $@
355 ifeq ($(config-targets
),1)
356 # ===========================================================================
357 # *config targets only - make sure prerequisites are updated, and descend
358 # in scripts/kconfig to make the *config target
360 %config
: scripts
/fixdep FORCE
361 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
362 config
: scripts
/fixdep FORCE
363 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
366 # ===========================================================================
367 # Build targets only - this includes vmlinux, arch specific targets, clean
368 # targets and others. In general all targets except *config targets.
370 # That's our default target when none is given on the command line
371 # Note that 'modules' will be added as a prerequisite as well,
372 # in the CONFIG_MODULES part below
376 # Objects we will link into vmlinux / subdirs we need to visit
378 drivers-y
:= drivers
/ sound
/
384 ifeq ($(dot-config
),1)
385 # In this section, we need .config
387 # Read in dependencies to all Kconfig* files, make sure to run
388 # oldconfig if changes are detected.
393 # If .config needs to be updated, it will be done via the dependency
394 # that autoconf has on .config.
395 # To avoid any implicit rule to kick in, define an empty command
398 # If .config is newer than include/linux/autoconf.h, someone tinkered
399 # with it and forgot to run make oldconfig
400 include/linux
/autoconf.h
: .config
401 $(Q
)$(MAKE
) -f
$(srctree
)/Makefile silentoldconfig
405 include $(srctree
)/arch
/$(ARCH
)/Makefile
407 # Let architecture Makefiles change CPPFLAGS if needed
408 CFLAGS
:= $(CPPFLAGS
) $(CFLAGS
)
409 AFLAGS
:= $(CPPFLAGS
) $(AFLAGS
)
411 core-y
+= kernel
/ mm
/ fs
/ ipc
/ security
/ crypto
/
413 SUBDIRS
+= $(patsubst %/,%,$(filter %/, $(init-y
) $(init-m
) \
414 $(core-y
) $(core-m
) $(drivers-y
) $(drivers-m
) \
415 $(net-y
) $(net-m
) $(libs-y
) $(libs-m
)))
417 ALL_SUBDIRS
:= $(sort $(SUBDIRS
) $(patsubst %/,%,$(filter %/, \
419 $(core-n
) $(core-
) $(drivers-n
) $(drivers-
) \
420 $(net-n
) $(net-
) $(libs-n
) $(libs-
))))
422 init-y
:= $(patsubst %/, %/built-in.o
, $(init-y
))
423 core-y
:= $(patsubst %/, %/built-in.o
, $(core-y
))
424 drivers-y
:= $(patsubst %/, %/built-in.o
, $(drivers-y
))
425 net-y
:= $(patsubst %/, %/built-in.o
, $(net-y
))
426 libs-y1
:= $(patsubst %/, %/lib.a
, $(libs-y
))
427 libs-y2
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
428 libs-y
:= $(libs-y1
) $(libs-y2
)
430 # Here goes the main Makefile
431 # ---------------------------------------------------------------------------
434 ifndef CONFIG_FRAME_POINTER
435 CFLAGS
+= -fomit-frame-pointer
438 ifdef CONFIG_DEBUG_INFO
442 # warn about C99 declaration after statement
443 CFLAGS
+= $(call check_gcc
,-Wdeclaration-after-statement
,)
446 # INSTALL_PATH specifies where to place the updated kernel and system map
447 # images. Uncomment if you want to place them anywhere other than root.
450 #export INSTALL_PATH=/boot
453 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
454 # relocations required by build roots. This is not defined in the
455 # makefile but the arguement can be passed to make if needed.
458 MODLIB
:= $(INSTALL_MOD_PATH
)/lib
/modules
/$(KERNELRELEASE
)
462 # ---------------------------------------------------------------------------
464 # This is a bit tricky: If we need to relink vmlinux, we want
465 # the version number incremented, which means recompile init/version.o
466 # and relink init/init.o. However, we cannot do this during the
467 # normal descending-into-subdirs phase, since at that time
468 # we cannot yet know if we will need to relink vmlinux.
469 # So we descend into init/ inside the rule for vmlinux again.
471 vmlinux-objs
:= $(head-y
) $(init-y
) $(core-y
) $(libs-y
) $(drivers-y
) $(net-y
)
473 quiet_cmd_vmlinux__
= LD
$@
475 $(LD
) $(LDFLAGS
) $(LDFLAGS_vmlinux
) $(head-y
) $(init-y
) \
482 $(filter .tmp_kallsyms
%,$^
) \
486 # set -e makes the rule exit immediately on error
488 define rule_vmlinux__
490 $(if
$(filter .tmp_kallsyms
%,$^
),, \
491 echo
' GEN .version'; \
492 .
$(srctree
)/scripts
/mkversion
> .tmp_version
; \
493 mv
-f .tmp_version .version
; \
494 $(MAKE
) $(build
)=init
; \
496 $(if
$($(quiet
)cmd_vmlinux__
), \
497 echo
' $($(quiet)cmd_vmlinux__)' &&) \
499 echo
'cmd_$@ := $(cmd_vmlinux__)' > $(@D
)/.
$(@F
).cmd
504 $(NM
) $@ | grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' |
sort > System.map
507 LDFLAGS_vmlinux
+= -T arch
/$(ARCH
)/kernel
/vmlinux.lds.s
509 # Generate section listing all symbols and add it into vmlinux
510 # It's a three stage process:
511 # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
513 # Running kallsyms on that gives us .tmp_kallsyms1.o with
515 # o .tmp_vmlinux2 now has a __kallsyms section of the right size,
516 # but due to the added section, some addresses have shifted
517 # From here, we generate a correct .tmp_kallsyms2.o
518 # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
520 ifdef CONFIG_KALLSYMS
522 kallsyms.o
:= .tmp_kallsyms2.o
524 quiet_cmd_kallsyms
= KSYM
$@
525 cmd_kallsyms
= $(NM
) -n
$< |
$(KALLSYMS
) > $@
527 .tmp_kallsyms1.o .tmp_kallsyms2.o
: %.o
: %.S scripts FORCE
528 $(call if_changed_dep
,as_o_S
)
530 .tmp_kallsyms
%.S
: .tmp_vmlinux
%
533 .tmp_vmlinux1
: $(vmlinux-objs
) arch
/$(ARCH
)/kernel
/vmlinux.lds.s FORCE
534 +$(call if_changed_rule
,vmlinux__
)
536 .tmp_vmlinux2
: $(vmlinux-objs
) .tmp_kallsyms1.o arch
/$(ARCH
)/kernel
/vmlinux.lds.s FORCE
537 $(call if_changed_rule
,vmlinux__
)
541 # Finally the vmlinux rule
543 vmlinux
: $(vmlinux-objs
) $(kallsyms.o
) arch
/$(ARCH
)/kernel
/vmlinux.lds.s FORCE
544 $(call if_changed_rule
,vmlinux
)
546 # The actual objects are generated when descending,
547 # make sure no implicit rule kicks in
549 $(sort $(vmlinux-objs
)) arch
/$(ARCH
)/kernel
/vmlinux.lds.s
: $(SUBDIRS
) ;
551 # Handle descending into subdirectories listed in $(SUBDIRS)
554 $(SUBDIRS
): prepare-all
555 $(Q
)$(MAKE
) $(build
)=$@
557 # Things we need to do before we recursively start building the kernel
558 # or the modules are listed in "prepare-all".
559 # A multi level approach is used. prepare1 is updated first, then prepare0.
560 # prepare-all is the collection point for the prepare targets.
562 .PHONY
: prepare-all prepare prepare0 prepare1
564 # prepare1 is used to check if we are building in a separate output directory,
566 # 1) Check that make has not been executed in the kernel src $(srctree)
567 # 2) Create the include2 directory, used for the second asm symlink
570 ifneq ($(KBUILD_SRC
),)
571 @echo
' Using $(srctree) as source for kernel'
572 $(Q
)if
[ -h
$(srctree
)/include/asm
-o
-f
$(srctree
)/.config
]; then \
573 echo
" $(srctree) is not clean, please run 'make mrproper'";\
574 echo
" in the '$(srctree)' directory.";\
577 $(Q
)if
[ ! -d include2
]; then mkdir
-p include2
; fi
;
578 $(Q
)ln
-fsn
$(srctree
)/include/asm-
$(ARCH
) include2
/asm
581 prepare0
: prepare1
include/linux
/version.h
include/asm
include/config
/MARKER
583 ifeq ($(origin SUBDIRS
),file
)
584 $(Q
)rm -rf
$(MODVERDIR
)
586 @echo
'*** Warning: Overriding SUBDIRS on the command line can cause'
587 @echo
'*** inconsistencies'
590 $(if
$(CONFIG_MODULES
),$(Q
)mkdir
-p
$(MODVERDIR
))
592 # All the preparing..
593 prepare-all
: prepare0 prepare
595 # Leave this as default for preprocessing vmlinux.lds.S, which is now
596 # done in arch/$(ARCH)/kernel/Makefile
598 export AFLAGS_vmlinux.lds.o
+= -P
-C
-U
$(ARCH
)
601 # ---------------------------------------------------------------------------
603 %.s
: %.c scripts FORCE
604 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
605 %.i
: %.c scripts FORCE
606 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
607 %.o
: %.c scripts FORCE
608 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
609 %/: scripts prepare FORCE
610 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) $(build
)=$(@D
)
611 %.lst
: %.c scripts FORCE
612 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
613 %.s
: %.S scripts FORCE
614 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
615 %.o
: %.S scripts FORCE
616 $(Q
)$(MAKE
) $(build
)=$(@D
) $@
618 # FIXME: The asm symlink changes when $(ARCH) changes. That's
619 # hard to detect, but I suppose "make mrproper" is a good idea
620 # before switching between archs anyway.
623 @echo
' SYMLINK $@ -> include/asm-$(ARCH)'
624 $(Q
)if
[ ! -d
include ]; then mkdir
-p
include; fi
;
625 @ln
-fsn asm-
$(ARCH
) $@
627 # Split autoconf.h into include/linux/config/*
629 include/config
/MARKER
: scripts
/split-include
include/linux
/autoconf.h
630 @echo
' SPLIT include/linux/autoconf.h -> include/config/*'
631 @scripts
/split-include
include/linux
/autoconf.h
include/config
634 # Generate some files
635 # ---------------------------------------------------------------------------
637 # version.h changes when $(KERNELRELEASE) etc change, as defined in
642 define filechk_version.h
643 if expr length
"$(KERNELRELEASE)" \
> $(uts_len
) >/dev
/null
; then \
644 echo
'"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
647 (echo \
#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
648 echo \
#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
649 echo
'#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
653 include/linux
/version.h
: Makefile
654 $(call filechk
,version.h
)
656 # ---------------------------------------------------------------------------
660 @echo
'*** Warning: make $@ is unnecessary now.'
662 # ---------------------------------------------------------------------------
667 # By default, build modules as well
674 modules
: $(SUBDIRS
) $(if
$(KBUILD_BUILTIN
),vmlinux
)
675 @echo
' Building modules, stage 2.';
676 $(Q
)$(MAKE
) -rR
-f
$(srctree
)/scripts
/Makefile.modpost
680 .PHONY
: modules_install
681 modules_install
: _modinst_ _modinst_post
685 @if
[ -z
"`$(DEPMOD) -V | grep module-init-tools`" ]; then \
686 echo
"Warning: you may need to install module-init-tools"; \
687 echo
"See http://www.codemonkey.org.uk/post-halloween-2.5.txt";\
690 @
rm -rf
$(MODLIB
)/kernel
691 @
rm -f
$(MODLIB
)/build
692 @mkdir
-p
$(MODLIB
)/kernel
693 @ln
-s
$(TOPDIR
) $(MODLIB
)/build
694 $(Q
)$(MAKE
) -rR
-f
$(srctree
)/scripts
/Makefile.modinst
696 # If System.map exists, run depmod. This deliberately does not have a
697 # dependency on System.map since that would run the dependency tree on
698 # vmlinux. This depmod is only for convenience to give the initial
699 # boot a modules.dep even before / is mounted read-write. However the
700 # boot script depmod is the master version.
701 ifeq "$(strip $(INSTALL_MOD_PATH))" ""
704 depmod_opts
:= -b
$(INSTALL_MOD_PATH
) -r
706 .PHONY
: _modinst_post
707 _modinst_post
: _modinst_
708 if
[ -r System.map
]; then
$(DEPMOD
) -ae
-F System.map
$(depmod_opts
) $(KERNELRELEASE
); fi
710 else # CONFIG_MODULES
712 # Modules not configured
713 # ---------------------------------------------------------------------------
715 modules modules_install
: FORCE
717 @echo
"The present kernel configuration has modules disabled."
718 @echo
"Type 'make config' and enable loadable module support."
719 @echo
"Then build a kernel with module support enabled."
723 endif # CONFIG_MODULES
725 # Generate asm-offsets.h
726 # ---------------------------------------------------------------------------
728 define filechk_gen-asm-offsets
730 echo
"#ifndef __ASM_OFFSETS_H__"; \
731 echo
"#define __ASM_OFFSETS_H__"; \
733 echo
" * DO NOT MODIFY."; \
735 echo
" * This file was generated by arch/$(ARCH)/Makefile"; \
739 sed
-ne
"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
746 # Cleaning is done on three levels.
747 # make clean Delete all automatically generated files, including
748 # tools and firmware.
749 # make mrproper Delete the current configuration, and related files
750 # Any core files spread around are deleted as well
751 # make distclean Remove editor backup files, patch leftover files and the like
753 # Files removed with 'make clean'
754 CLEAN_FILES
+= vmlinux System.map MC
*
756 # Files removed with 'make mrproper'
758 include/linux
/autoconf.h
include/linux
/version.h \
759 .version .config .config.old config.in config.old \
762 .hdepend
include/linux
/modversions.h \
763 tags TAGS cscope
* kernel.spec \
766 # Directories removed with 'make mrproper'
771 include/linux
/modules \
774 # clean - Delete all intermediate files
776 clean-dirs
+= $(addprefix _clean_
,$(ALL_SUBDIRS
) Documentation
/DocBook scripts
)
777 .PHONY
: $(clean-dirs
) clean archclean mrproper archmrproper
distclean
779 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
781 quiet_cmd_rmclean
= RM
$$(CLEAN_FILES
)
782 cmd_rmclean
= rm -f
$(CLEAN_FILES
)
783 clean: archclean
$(clean-dirs
)
785 @find .
$(RCS_FIND_IGNORE
) \
786 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
787 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
) \
788 -type f
-print | xargs
rm -f
790 # mrproper - delete configuration + modules + core files
792 quiet_cmd_mrproper
= RM
$$(MRPROPER_DIRS
) + $$(MRPROPER_FILES
)
793 cmd_mrproper
= rm -rf
$(MRPROPER_DIRS
) && rm -f
$(MRPROPER_FILES
)
794 mrproper
distclean: clean archmrproper
795 @echo
' Making $@ in the srctree'
796 @find .
$(RCS_FIND_IGNORE
) \
797 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
798 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
799 -o
-name
'.*.rej' -o
-size
0 \
800 -o
-name
'*%' -o
-name
'.*.cmd' -o
-name
'core' \
) \
801 -type f
-print | xargs
rm -f
804 # Generate tags for editors
805 # ---------------------------------------------------------------------------
808 ( find .
$(RCS_FIND_IGNORE
) \
809 \
( -name
include -o
-name arch \
) -prune
-o \
810 -name
'*.[chS]' -print; \
811 find arch
/$(ARCH
) $(RCS_FIND_IGNORE
) \
812 -name
'*.[chS]' -print; \
813 find
include $(RCS_FIND_IGNORE
) \
814 \
( -name config
-o
-name
'asm-*' \
) -prune \
815 -o
-name
'*.[chS]' -print; \
816 find
include/asm-
$(ARCH
) $(RCS_FIND_IGNORE
) \
817 -name
'*.[chS]' -print; \
818 find
include/asm-generic
$(RCS_FIND_IGNORE
) \
819 -name
'*.[chS]' -print )
822 quiet_cmd_cscope
= MAKE
$@
823 cmd_cscope
= $(all-sources
) | cscope
-k
-b
-i
-
825 quiet_cmd_TAGS
= MAKE
$@
826 cmd_TAGS
= $(all-sources
) | etags
-
828 # Exuberant ctags works better with -I
830 quiet_cmd_tags
= MAKE
$@
833 CTAGSF
=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
834 $(all-sources
) | xargs ctags
$$CTAGSF -a
847 # ---------------------------------------------------------------------------
851 # Remove hyphens since they have special meaning in RPM filenames
852 KERNELPATH
=kernel-
$(subst -,,$(KERNELRELEASE
))
854 # If you do a make spec before packing the tarball you can rpm -ta it
857 $(CONFIG_SHELL
) $(srctree
)/scripts
/mkspec
> $(objtree
)/kernel.spec
859 # a) Build a tar ball
860 # b) generate an rpm from it
861 # c) and pack the result
862 # - Use /. to avoid tar packing just the symlink
867 ln
-sf
$(srctree
) $(KERNELPATH
) ; \
868 tar -cvz
$(RCS_TAR_IGNORE
) -f
$(KERNELPATH
).
tar.gz
$(KERNELPATH
)/.
; \
872 $(CONFIG_SHELL
) $(srctree
)/scripts
/mkversion
> $(objtree
)/.tmp_version
;\
873 mv
-f
$(objtree
)/.tmp_version
$(objtree
)/.version
;
875 $(RPM
) -ta ..
/$(KERNELPATH
).
tar.gz
876 rm ..
/$(KERNELPATH
).
tar.gz
878 # Brief documentation of the typical targets used
879 # ---------------------------------------------------------------------------
882 @echo
'Cleaning targets:'
883 @echo
' clean - remove most generated files but keep the config'
884 @echo
' mrproper - remove all generated files + config + various backup files'
886 @echo
'Configuration targets:'
887 @
$(MAKE
) -f
$(srctree
)/scripts
/kconfig
/Makefile help
889 @echo
'Other generic targets:'
890 @echo
' all - Build all targets marked with [*]'
891 @echo
'* vmlinux - Build the bare kernel'
892 @echo
'* modules - Build all modules'
893 @echo
' modules_install - Install all modules'
894 @echo
' dir/ - Build all files in dir and below'
895 @echo
' dir/file.[ois] - Build specified target only'
896 @echo
' rpm - Build a kernel as an RPM package'
897 @echo
' tags/TAGS - Generate tags file for editors'
899 @echo
'Documentation targets:'
900 @
$(MAKE
) -f
$(srctree
)/Documentation
/DocBook
/Makefile dochelp
902 @echo
'Architecture specific targets ($(ARCH)):'
903 @
$(if
$(archhelp
),$(archhelp
),\
904 echo
' No architecture specific help defined for $(ARCH)')
906 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
907 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
908 @echo
' make C=1 [targets] Check all c source with checker tool'
910 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
911 @echo
'For further info see the ./README file'
914 # Documentation targets
915 # ---------------------------------------------------------------------------
916 %docs
: scripts
/docproc FORCE
917 $(Q
)$(MAKE
) $(build
)=Documentation
/DocBook
$@
919 # Scripts to check various things for consistency
920 # ---------------------------------------------------------------------------
923 find
* $(RCS_FIND_IGNORE
) \
924 -name
'*.[hcS]' -type f
-print |
sort \
925 | xargs
$(PERL
) -w scripts
/checkconfig.pl
928 find
* $(RCS_FIND_IGNORE
) \
929 -name
'*.[hcS]' -type f
-print |
sort \
930 | xargs
$(PERL
) -w scripts
/checkincludes.pl
933 find
* $(RCS_FIND_IGNORE
) \
934 -name
'*.[hcS]' -type f
-print |
sort \
935 | xargs
$(PERL
) -w scripts
/checkversion.pl
937 endif #ifeq ($(config-targets),1)
938 endif #ifeq ($(mixed-targets),1)
940 # FIXME Should go into a make.lib or something
941 # ===========================================================================
943 a_flags
= -Wp
,-MD
,$(depfile
) $(AFLAGS
) $(AFLAGS_KERNEL
) \
944 $(NOSTDINC_FLAGS
) $(CPPFLAGS
) \
945 $(modkern_aflags
) $(EXTRA_AFLAGS
) $(AFLAGS_
$(*F
).o
)
947 quiet_cmd_as_o_S
= AS
$@
948 cmd_as_o_S
= $(CC
) $(a_flags
) -c
-o
$@
$<
950 # read all saved command lines
952 targets
:= $(wildcard $(sort $(targets
)))
953 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
955 ifneq ($(cmd_files
),)
956 $(cmd_files
): ; # Do not try to update included dependency files
960 # execute the command and also postprocess generated .d dependencies
963 if_changed_dep
= $(if
$(strip $?
$(filter-out FORCE
$(wildcard $^
),$^
)\
964 $(filter-out $(cmd_
$(1)),$(cmd_
$@
))\
965 $(filter-out $(cmd_
$@
),$(cmd_
$(1)))),\
967 $(if
$($(quiet
)cmd_
$(1)),echo
' $(subst ','\'',$($(quiet
)cmd_
$(1)))';) \
969 scripts/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D
)/.
$(@F
).tmp
; \
971 mv
-f
$(@D
)/.
$(@F
).tmp
$(@D
)/.
$(@F
).cmd
)
973 # Usage: $(call if_changed_rule,foo)
974 # will check if $(cmd_foo) changed, or any of the prequisites changed,
975 # and if so will execute $(rule_foo)
977 if_changed_rule
= $(if
$(strip $? \
978 $(filter-out $(cmd_
$(1)),$(cmd_
$(@F
)))\
979 $(filter-out $(cmd_
$(@F
)),$(cmd_
$(1)))),\
982 # If quiet is set, only print short version of command
984 cmd
= @
$(if
$($(quiet
)cmd_
$(1)),echo
' $($(quiet)cmd_$(1))' &&) $(cmd_
$(1))
986 # filechk is used to check if the content of a generated file is updated.
988 # define filechk_sample
989 # echo $KERNELRELEASE
991 # version.h : Makefile
992 # $(call filechk,sample)
993 # The rule defined shall write to stdout the content of the new file.
994 # The existing file will be compared with the new one.
995 # - If no file exist it is created
996 # - If the content differ the new file is used
997 # - If they are equal no change, and no timestamp update
1002 mkdir
-p
$(dir $@
); \
1003 $(filechk_
$(1)) < $< > $@.tmp
; \
1004 if
[ -r
$@
] && cmp
-s
$@
$@.tmp
; then \
1012 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
1014 # $(Q)$(MAKE) $(build)=dir
1015 build
:= -f
$(if
$(KBUILD_SRC
),$(srctree
)/)scripts
/Makefile.build obj
1017 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1019 # $(Q)$(MAKE) $(clean)=dir
1020 clean := -f
$(if
$(KBUILD_SRC
),$(srctree
)/)scripts
/Makefile.
clean obj
1022 # $(call descend,<dir>,<target>)
1023 # Recursively call a sub-make in <dir> with target <target>
1024 # Usage is deprecated, because make does not see this as an invocation of make.
1025 descend
=$(Q
)$(MAKE
) -f
$(if
$(KBUILD_SRC
),$(srctree
)/)scripts
/Makefile.build obj
=$(1) $(2)
1027 endif # skip-makefile