NOMMU: Remove an extraneous no_printk()

[linux-2.6/cjktty.git] / drivers / scsi / aacraid / comminit.c

/*
 *      Adaptec AAC series RAID controller driver
 *      (c) Copyright 2001 Red Hat Inc.
 *
 * based on the old aacraid driver that is..
 * Adaptec aacraid device driver for Linux.
 *
 * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Module Name:
 *  comminit.c
 *
 * Abstract: This supports the initialization of the host adapter commuication interface.
 *    This is a platform dependent module for the pci cyclone board.
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mm.h>
#include <scsi/scsi_host.h>

#include "aacraid.h"

struct aac_common aac_config = {
        .irq_mod = 1
};

static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long commsize, unsigned long commalign)
{
        unsigned char *base;
        unsigned long size, align;
        const unsigned long fibsize = 4096;
        const unsigned long printfbufsiz = 256;
        struct aac_init *init;
        dma_addr_t phys;
        unsigned long aac_max_hostphysmempages;

        size = fibsize + sizeof(struct aac_init) + commsize + commalign + printfbufsiz;

 
        base = pci_alloc_consistent(dev->pdev, size, &phys);

        if(base == NULL)
        {
                printk(KERN_ERR "aacraid: unable to create mapping.\n");
                return 0;
        }
        dev->comm_addr = (void *)base;
        dev->comm_phys = phys;
        dev->comm_size = size;
        
        dev->init = (struct aac_init *)(base + fibsize);
        dev->init_pa = phys + fibsize;

        init = dev->init;

        init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
        if (dev->max_fib_size != sizeof(struct hw_fib))
                init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
        init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
        init->fsrev = cpu_to_le32(dev->fsrev);

        /*
         *      Adapter Fibs are the first thing allocated so that they
         *      start page aligned
         */
        dev->aif_base_va = (struct hw_fib *)base;
        
        init->AdapterFibsVirtualAddress = 0;
        init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
        init->AdapterFibsSize = cpu_to_le32(fibsize);
        init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
        /*
         * number of 4k pages of host physical memory. The aacraid fw needs
         * this number to be less than 4gb worth of pages. New firmware doesn't
         * have any issues with the mapping system, but older Firmware did, and
         * had *troubles* dealing with the math overloading past 32 bits, thus
         * we must limit this field.
         */
        aac_max_hostphysmempages = dma_get_required_mask(&dev->pdev->dev) >> 12;
        if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES)
                init->HostPhysMemPages = cpu_to_le32(aac_max_hostphysmempages);
        else
                init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);

        init->InitFlags = 0;
        if (dev->comm_interface == AAC_COMM_MESSAGE) {
                init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
                dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
        }
        init->InitFlags |= cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
                                       INITFLAGS_DRIVER_SUPPORTS_PM);
        init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
        init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
        init->MaxFibSize = cpu_to_le32(dev->max_fib_size);

        /*
         * Increment the base address by the amount already used
         */
        base = base + fibsize + sizeof(struct aac_init);
        phys = (dma_addr_t)((ulong)phys + fibsize + sizeof(struct aac_init));
        /*
         *      Align the beginning of Headers to commalign
         */
        align = (commalign - ((uintptr_t)(base) & (commalign - 1)));
        base = base + align;
        phys = phys + align;
        /*
         *      Fill in addresses of the Comm Area Headers and Queues
         */
        *commaddr = base;
        init->CommHeaderAddress = cpu_to_le32((u32)phys);
        /*
         *      Increment the base address by the size of the CommArea
         */
        base = base + commsize;
        phys = phys + commsize;
        /*
         *       Place the Printf buffer area after the Fast I/O comm area.
         */
        dev->printfbuf = (void *)base;
        init->printfbuf = cpu_to_le32(phys);
        init->printfbufsiz = cpu_to_le32(printfbufsiz);
        memset(base, 0, printfbufsiz);
        return 1;
}
    
static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
{
        q->numpending = 0;
        q->dev = dev;
        init_waitqueue_head(&q->cmdready);
        INIT_LIST_HEAD(&q->cmdq);
        init_waitqueue_head(&q->qfull);
        spin_lock_init(&q->lockdata);
        q->lock = &q->lockdata;
        q->headers.producer = (__le32 *)mem;
        q->headers.consumer = (__le32 *)(mem+1);
        *(q->headers.producer) = cpu_to_le32(qsize);
        *(q->headers.consumer) = cpu_to_le32(qsize);
        q->entries = qsize;
}

/**
 *      aac_send_shutdown               -       shutdown an adapter
 *      @dev: Adapter to shutdown
 *
 *      This routine will send a VM_CloseAll (shutdown) request to the adapter.
 */

int aac_send_shutdown(struct aac_dev * dev)
{
        struct fib * fibctx;
        struct aac_close *cmd;
        int status;

        fibctx = aac_fib_alloc(dev);
        if (!fibctx)
                return -ENOMEM;
        aac_fib_init(fibctx);

        cmd = (struct aac_close *) fib_data(fibctx);

        cmd->command = cpu_to_le32(VM_CloseAll);
        cmd->cid = cpu_to_le32(0xffffffff);

        status = aac_fib_send(ContainerCommand,
                          fibctx,
                          sizeof(struct aac_close),
                          FsaNormal,
                          -2 /* Timeout silently */, 1,
                          NULL, NULL);

        if (status >= 0)
                aac_fib_complete(fibctx);
        /* FIB should be freed only after getting the response from the F/W */
        if (status != -ERESTARTSYS)
                aac_fib_free(fibctx);
        return status;
}

/**
 *      aac_comm_init   -       Initialise FSA data structures
 *      @dev:   Adapter to initialise
 *
 *      Initializes the data structures that are required for the FSA commuication
 *      interface to operate. 
 *      Returns
 *              1 - if we were able to init the commuication interface.
 *              0 - If there were errors initing. This is a fatal error.
 */
 
static int aac_comm_init(struct aac_dev * dev)
{
        unsigned long hdrsize = (sizeof(u32) * NUMBER_OF_COMM_QUEUES) * 2;
        unsigned long queuesize = sizeof(struct aac_entry) * TOTAL_QUEUE_ENTRIES;
        u32 *headers;
        struct aac_entry * queues;
        unsigned long size;
        struct aac_queue_block * comm = dev->queues;
        /*
         *      Now allocate and initialize the zone structures used as our 
         *      pool of FIB context records.  The size of the zone is based
         *      on the system memory size.  We also initialize the mutex used
         *      to protect the zone.
         */
        spin_lock_init(&dev->fib_lock);

        /*
         *      Allocate the physically contiguous space for the commuication
         *      queue headers. 
         */

        size = hdrsize + queuesize;

        if (!aac_alloc_comm(dev, (void * *)&headers, size, QUEUE_ALIGNMENT))
                return -ENOMEM;

        queues = (struct aac_entry *)(((ulong)headers) + hdrsize);

        /* Adapter to Host normal priority Command queue */ 
        comm->queue[HostNormCmdQueue].base = queues;
        aac_queue_init(dev, &comm->queue[HostNormCmdQueue], headers, HOST_NORM_CMD_ENTRIES);
        queues += HOST_NORM_CMD_ENTRIES;
        headers += 2;

        /* Adapter to Host high priority command queue */
        comm->queue[HostHighCmdQueue].base = queues;
        aac_queue_init(dev, &comm->queue[HostHighCmdQueue], headers, HOST_HIGH_CMD_ENTRIES);
    
        queues += HOST_HIGH_CMD_ENTRIES;
        headers +=2;

        /* Host to adapter normal priority command queue */
        comm->queue[AdapNormCmdQueue].base = queues;
        aac_queue_init(dev, &comm->queue[AdapNormCmdQueue], headers, ADAP_NORM_CMD_ENTRIES);
    
        queues += ADAP_NORM_CMD_ENTRIES;
        headers += 2;

        /* host to adapter high priority command queue */
        comm->queue[AdapHighCmdQueue].base = queues;
        aac_queue_init(dev, &comm->queue[AdapHighCmdQueue], headers, ADAP_HIGH_CMD_ENTRIES);
    
        queues += ADAP_HIGH_CMD_ENTRIES;
        headers += 2;

        /* adapter to host normal priority response queue */
        comm->queue[HostNormRespQueue].base = queues;
        aac_queue_init(dev, &comm->queue[HostNormRespQueue], headers, HOST_NORM_RESP_ENTRIES);
        queues += HOST_NORM_RESP_ENTRIES;
        headers += 2;

        /* adapter to host high priority response queue */
        comm->queue[HostHighRespQueue].base = queues;
        aac_queue_init(dev, &comm->queue[HostHighRespQueue], headers, HOST_HIGH_RESP_ENTRIES);
   
        queues += HOST_HIGH_RESP_ENTRIES;
        headers += 2;

        /* host to adapter normal priority response queue */
        comm->queue[AdapNormRespQueue].base = queues;
        aac_queue_init(dev, &comm->queue[AdapNormRespQueue], headers, ADAP_NORM_RESP_ENTRIES);

        queues += ADAP_NORM_RESP_ENTRIES;
        headers += 2;
        
        /* host to adapter high priority response queue */ 
        comm->queue[AdapHighRespQueue].base = queues;
        aac_queue_init(dev, &comm->queue[AdapHighRespQueue], headers, ADAP_HIGH_RESP_ENTRIES);

        comm->queue[AdapNormCmdQueue].lock = comm->queue[HostNormRespQueue].lock;
        comm->queue[AdapHighCmdQueue].lock = comm->queue[HostHighRespQueue].lock;
        comm->queue[AdapNormRespQueue].lock = comm->queue[HostNormCmdQueue].lock;
        comm->queue[AdapHighRespQueue].lock = comm->queue[HostHighCmdQueue].lock;

        return 0;
}

struct aac_dev *aac_init_adapter(struct aac_dev *dev)
{
        u32 status[5];
        struct Scsi_Host * host = dev->scsi_host_ptr;

        /*
         *      Check the preferred comm settings, defaults from template.
         */
        dev->management_fib_count = 0;
        spin_lock_init(&dev->manage_lock);
        dev->max_fib_size = sizeof(struct hw_fib);
        dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
                - sizeof(struct aac_fibhdr)
                - sizeof(struct aac_write) + sizeof(struct sgentry))
                        / sizeof(struct sgentry);
        dev->comm_interface = AAC_COMM_PRODUCER;
        dev->raw_io_64 = 0;
        if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
                0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
                        (status[0] == 0x00000001)) {
                if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64))
                        dev->raw_io_64 = 1;
                if (dev->a_ops.adapter_comm &&
                    (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)))
                        dev->comm_interface = AAC_COMM_MESSAGE;
                if ((dev->comm_interface == AAC_COMM_MESSAGE) &&
                    (status[2] > dev->base_size)) {
                        aac_adapter_ioremap(dev, 0);
                        dev->base_size = status[2];
                        if (aac_adapter_ioremap(dev, status[2])) {
                                /* remap failed, go back ... */
                                dev->comm_interface = AAC_COMM_PRODUCER;
                                if (aac_adapter_ioremap(dev, AAC_MIN_FOOTPRINT_SIZE)) {
                                        printk(KERN_WARNING
                                          "aacraid: unable to map adapter.\n");
                                        return NULL;
                                }
                        }
                }
        }
        if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
          0, 0, 0, 0, 0, 0,
          status+0, status+1, status+2, status+3, status+4))
         && (status[0] == 0x00000001)) {
                /*
                 *      status[1] >> 16         maximum command size in KB
                 *      status[1] & 0xFFFF      maximum FIB size
                 *      status[2] >> 16         maximum SG elements to driver
                 *      status[2] & 0xFFFF      maximum SG elements from driver
                 *      status[3] & 0xFFFF      maximum number FIBs outstanding
                 */
                host->max_sectors = (status[1] >> 16) << 1;
                dev->max_fib_size = status[1] & 0xFFFF;
                host->sg_tablesize = status[2] >> 16;
                dev->sg_tablesize = status[2] & 0xFFFF;
                host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
                /*
                 *      NOTE:
                 *      All these overrides are based on a fixed internal
                 *      knowledge and understanding of existing adapters,
                 *      acbsize should be set with caution.
                 */
                if (acbsize == 512) {
                        host->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
                        dev->max_fib_size = 512;
                        dev->sg_tablesize = host->sg_tablesize
                          = (512 - sizeof(struct aac_fibhdr)
                            - sizeof(struct aac_write) + sizeof(struct sgentry))
                             / sizeof(struct sgentry);
                        host->can_queue = AAC_NUM_IO_FIB;
                } else if (acbsize == 2048) {
                        host->max_sectors = 512;
                        dev->max_fib_size = 2048;
                        host->sg_tablesize = 65;
                        dev->sg_tablesize = 81;
                        host->can_queue = 512 - AAC_NUM_MGT_FIB;
                } else if (acbsize == 4096) {
                        host->max_sectors = 1024;
                        dev->max_fib_size = 4096;
                        host->sg_tablesize = 129;
                        dev->sg_tablesize = 166;
                        host->can_queue = 256 - AAC_NUM_MGT_FIB;
                } else if (acbsize == 8192) {
                        host->max_sectors = 2048;
                        dev->max_fib_size = 8192;
                        host->sg_tablesize = 257;
                        dev->sg_tablesize = 337;
                        host->can_queue = 128 - AAC_NUM_MGT_FIB;
                } else if (acbsize > 0) {
                        printk("Illegal acbsize=%d ignored\n", acbsize);
                }
        }
        {

                if (numacb > 0) {
                        if (numacb < host->can_queue)
                                host->can_queue = numacb;
                        else
                                printk("numacb=%d ignored\n", numacb);
                }
        }

        /*
         *      Ok now init the communication subsystem
         */

        dev->queues = kzalloc(sizeof(struct aac_queue_block), GFP_KERNEL);
        if (dev->queues == NULL) {
                printk(KERN_ERR "Error could not allocate comm region.\n");
                return NULL;
        }

        if (aac_comm_init(dev)<0){
                kfree(dev->queues);
                return NULL;
        }
        /*
         *      Initialize the list of fibs
         */
        if (aac_fib_setup(dev) < 0) {
                kfree(dev->queues);
                return NULL;
        }
                
        INIT_LIST_HEAD(&dev->fib_list);

        return dev;
}