drivers/hwmon/gl520sm.c

   1 /*
   2  * gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware
   3  *             monitoring
   4  * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
   5  *                           Kyösti Mälkki <kmalkki@cc.hut.fi>
   6  * Copyright (c) 2005   Maarten Deprez <maartendeprez@users.sourceforge.net>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  *
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/init.h>
  26 #include <linux/slab.h>
  27 #include <linux/jiffies.h>
  28 #include <linux/i2c.h>
  29 #include <linux/hwmon.h>
  30 #include <linux/hwmon-sysfs.h>
  31 #include <linux/hwmon-vid.h>
  32 #include <linux/err.h>
  33 #include <linux/mutex.h>
  34 #include <linux/sysfs.h>
  35
  36 /* Type of the extra sensor */
  37 static unsigned short extra_sensor_type;
  38 module_param(extra_sensor_type, ushort, 0);
  39 MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
  40
  41 /* Addresses to scan */
  42 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
  43
  44 /*
  45  * Many GL520 constants specified below
  46  * One of the inputs can be configured as either temp or voltage.
  47  * That's why _TEMP2 and _IN4 access the same register
  48  */
  49
  50 /* The GL520 registers */
  51 #define GL520_REG_CHIP_ID               0x00
  52 #define GL520_REG_REVISION              0x01
  53 #define GL520_REG_CONF                  0x03
  54 #define GL520_REG_MASK                  0x11
  55
  56 #define GL520_REG_VID_INPUT             0x02
  57
  58 static const u8 GL520_REG_IN_INPUT[]    = { 0x15, 0x14, 0x13, 0x0d, 0x0e };
  59 static const u8 GL520_REG_IN_LIMIT[]    = { 0x0c, 0x09, 0x0a, 0x0b };
  60 static const u8 GL520_REG_IN_MIN[]      = { 0x0c, 0x09, 0x0a, 0x0b, 0x18 };
  61 static const u8 GL520_REG_IN_MAX[]      = { 0x0c, 0x09, 0x0a, 0x0b, 0x17 };
  62
  63 static const u8 GL520_REG_TEMP_INPUT[]          = { 0x04, 0x0e };
  64 static const u8 GL520_REG_TEMP_MAX[]            = { 0x05, 0x17 };
  65 static const u8 GL520_REG_TEMP_MAX_HYST[]       = { 0x06, 0x18 };
  66
  67 #define GL520_REG_FAN_INPUT             0x07
  68 #define GL520_REG_FAN_MIN               0x08
  69 #define GL520_REG_FAN_DIV               0x0f
  70 #define GL520_REG_FAN_OFF               GL520_REG_FAN_DIV
  71
  72 #define GL520_REG_ALARMS                0x12
  73 #define GL520_REG_BEEP_MASK             0x10
  74 #define GL520_REG_BEEP_ENABLE           GL520_REG_CONF
  75
  76 /*
  77  * Function declarations
  78  */
  79
  80 static int gl520_probe(struct i2c_client *client,
  81                        const struct i2c_device_id *id);
  82 static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info);
  83 static void gl520_init_client(struct i2c_client *client);
  84 static int gl520_remove(struct i2c_client *client);
  85 static int gl520_read_value(struct i2c_client *client, u8 reg);
  86 static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value);
  87 static struct gl520_data *gl520_update_device(struct device *dev);
  88
  89 /* Driver data */
  90 static const struct i2c_device_id gl520_id[] = {
  91         { "gl520sm", 0 },
  92         { }
  93 };
  94 MODULE_DEVICE_TABLE(i2c, gl520_id);
  95
  96 static struct i2c_driver gl520_driver = {
  97         .class          = I2C_CLASS_HWMON,
  98         .driver = {
  99                 .name   = "gl520sm",
 100         },
 101         .probe          = gl520_probe,
 102         .remove         = gl520_remove,
 103         .id_table       = gl520_id,
 104         .detect         = gl520_detect,
 105         .address_list   = normal_i2c,
 106 };
 107
 108 /* Client data */
 109 struct gl520_data {
 110         struct device *hwmon_dev;
 111         struct mutex update_lock;
 112         char valid;             /* zero until the following fields are valid */
 113         unsigned long last_updated;     /* in jiffies */
 114
 115         u8 vid;
 116         u8 vrm;
 117         u8 in_input[5];         /* [0] = VVD */
 118         u8 in_min[5];           /* [0] = VDD */
 119         u8 in_max[5];           /* [0] = VDD */
 120         u8 fan_input[2];
 121         u8 fan_min[2];
 122         u8 fan_div[2];
 123         u8 fan_off;
 124         u8 temp_input[2];
 125         u8 temp_max[2];
 126         u8 temp_max_hyst[2];
 127         u8 alarms;
 128         u8 beep_enable;
 129         u8 beep_mask;
 130         u8 alarm_mask;
 131         u8 two_temps;
 132 };
 133
 134 /*
 135  * Sysfs stuff
 136  */
 137
 138 static ssize_t get_cpu_vid(struct device *dev, struct device_attribute *attr,
 139                            char *buf)
 140 {
 141         struct gl520_data *data = gl520_update_device(dev);
 142         return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
 143 }
 144 static DEVICE_ATTR(cpu0_vid, S_IRUGO, get_cpu_vid, NULL);
 145
 146 #define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
 147 #define VDD_TO_REG(val) SENSORS_LIMIT((((val) * 4 + 47) / 95), 0, 255)
 148
 149 #define IN_FROM_REG(val) ((val) * 19)
 150 #define IN_TO_REG(val) SENSORS_LIMIT((((val) + 9) / 19), 0, 255)
 151
 152 static ssize_t get_in_input(struct device *dev, struct device_attribute *attr,
 153                             char *buf)
 154 {
 155         int n = to_sensor_dev_attr(attr)->index;
 156         struct gl520_data *data = gl520_update_device(dev);
 157         u8 r = data->in_input[n];
 158
 159         if (n == 0)
 160                 return sprintf(buf, "%d\n", VDD_FROM_REG(r));
 161         else
 162                 return sprintf(buf, "%d\n", IN_FROM_REG(r));
 163 }
 164
 165 static ssize_t get_in_min(struct device *dev, struct device_attribute *attr,
 166                           char *buf)
 167 {
 168         int n = to_sensor_dev_attr(attr)->index;
 169         struct gl520_data *data = gl520_update_device(dev);
 170         u8 r = data->in_min[n];
 171
 172         if (n == 0)
 173                 return sprintf(buf, "%d\n", VDD_FROM_REG(r));
 174         else
 175                 return sprintf(buf, "%d\n", IN_FROM_REG(r));
 176 }
 177
 178 static ssize_t get_in_max(struct device *dev, struct device_attribute *attr,
 179                           char *buf)
 180 {
 181         int n = to_sensor_dev_attr(attr)->index;
 182         struct gl520_data *data = gl520_update_device(dev);
 183         u8 r = data->in_max[n];
 184
 185         if (n == 0)
 186                 return sprintf(buf, "%d\n", VDD_FROM_REG(r));
 187         else
 188                 return sprintf(buf, "%d\n", IN_FROM_REG(r));
 189 }
 190
 191 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
 192                           const char *buf, size_t count)
 193 {
 194         struct i2c_client *client = to_i2c_client(dev);
 195         struct gl520_data *data = i2c_get_clientdata(client);
 196         int n = to_sensor_dev_attr(attr)->index;
 197         u8 r;
 198         long v;
 199         int err;
 200
 201         err = kstrtol(buf, 10, &v);
 202         if (err)
 203                 return err;
 204
 205         mutex_lock(&data->update_lock);
 206
 207         if (n == 0)
 208                 r = VDD_TO_REG(v);
 209         else
 210                 r = IN_TO_REG(v);
 211
 212         data->in_min[n] = r;
 213
 214         if (n < 4)
 215                 gl520_write_value(client, GL520_REG_IN_MIN[n],
 216                                   (gl520_read_value(client, GL520_REG_IN_MIN[n])
 217                                    & ~0xff) | r);
 218         else
 219                 gl520_write_value(client, GL520_REG_IN_MIN[n], r);
 220
 221         mutex_unlock(&data->update_lock);
 222         return count;
 223 }
 224
 225 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
 226                           const char *buf, size_t count)
 227 {
 228         struct i2c_client *client = to_i2c_client(dev);
 229         struct gl520_data *data = i2c_get_clientdata(client);
 230         int n = to_sensor_dev_attr(attr)->index;
 231         u8 r;
 232         long v;
 233         int err;
 234
 235         err = kstrtol(buf, 10, &v);
 236         if (err)
 237                 return err;
 238
 239         if (n == 0)
 240                 r = VDD_TO_REG(v);
 241         else
 242                 r = IN_TO_REG(v);
 243
 244         mutex_lock(&data->update_lock);
 245
 246         data->in_max[n] = r;
 247
 248         if (n < 4)
 249                 gl520_write_value(client, GL520_REG_IN_MAX[n],
 250                                   (gl520_read_value(client, GL520_REG_IN_MAX[n])
 251                                    & ~0xff00) | (r << 8));
 252         else
 253                 gl520_write_value(client, GL520_REG_IN_MAX[n], r);
 254
 255         mutex_unlock(&data->update_lock);
 256         return count;
 257 }
 258
 259 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, get_in_input, NULL, 0);
 260 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, get_in_input, NULL, 1);
 261 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, get_in_input, NULL, 2);
 262 static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, get_in_input, NULL, 3);
 263 static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, get_in_input, NULL, 4);
 264 static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR,
 265                 get_in_min, set_in_min, 0);
 266 static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR,
 267                 get_in_min, set_in_min, 1);
 268 static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR,
 269                 get_in_min, set_in_min, 2);
 270 static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO | S_IWUSR,
 271                 get_in_min, set_in_min, 3);
 272 static SENSOR_DEVICE_ATTR(in4_min, S_IRUGO | S_IWUSR,
 273                 get_in_min, set_in_min, 4);
 274 static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR,
 275                 get_in_max, set_in_max, 0);
 276 static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR,
 277                 get_in_max, set_in_max, 1);
 278 static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR,
 279                 get_in_max, set_in_max, 2);
 280 static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO | S_IWUSR,
 281                 get_in_max, set_in_max, 3);
 282 static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR,
 283                 get_in_max, set_in_max, 4);
 284
 285 #define DIV_FROM_REG(val) (1 << (val))
 286 #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div))))
 287 #define FAN_TO_REG(val, div) ((val) <= 0 ? 0 : \
 288         SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, \
 289                       255))
 290
 291 static ssize_t get_fan_input(struct device *dev, struct device_attribute *attr,
 292                              char *buf)
 293 {
 294         int n = to_sensor_dev_attr(attr)->index;
 295         struct gl520_data *data = gl520_update_device(dev);
 296
 297         return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n],
 298                                                  data->fan_div[n]));
 299 }
 300
 301 static ssize_t get_fan_min(struct device *dev, struct device_attribute *attr,
 302                            char *buf)
 303 {
 304         int n = to_sensor_dev_attr(attr)->index;
 305         struct gl520_data *data = gl520_update_device(dev);
 306
 307         return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n],
 308                                                  data->fan_div[n]));
 309 }
 310
 311 static ssize_t get_fan_div(struct device *dev, struct device_attribute *attr,
 312                            char *buf)
 313 {
 314         int n = to_sensor_dev_attr(attr)->index;
 315         struct gl520_data *data = gl520_update_device(dev);
 316
 317         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n]));
 318 }
 319
 320 static ssize_t get_fan_off(struct device *dev, struct device_attribute *attr,
 321                            char *buf)
 322 {
 323         struct gl520_data *data = gl520_update_device(dev);
 324         return sprintf(buf, "%d\n", data->fan_off);
 325 }
 326
 327 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 328                            const char *buf, size_t count)
 329 {
 330         struct i2c_client *client = to_i2c_client(dev);
 331         struct gl520_data *data = i2c_get_clientdata(client);
 332         int n = to_sensor_dev_attr(attr)->index;
 333         u8 r;
 334         unsigned long v;
 335         int err;
 336
 337         err = kstrtoul(buf, 10, &v);
 338         if (err)
 339                 return err;
 340
 341         mutex_lock(&data->update_lock);
 342         r = FAN_TO_REG(v, data->fan_div[n]);
 343         data->fan_min[n] = r;
 344
 345         if (n == 0)
 346                 gl520_write_value(client, GL520_REG_FAN_MIN,
 347                                   (gl520_read_value(client, GL520_REG_FAN_MIN)
 348                                    & ~0xff00) | (r << 8));
 349         else
 350                 gl520_write_value(client, GL520_REG_FAN_MIN,
 351                                   (gl520_read_value(client, GL520_REG_FAN_MIN)
 352                                    & ~0xff) | r);
 353
 354         data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
 355         if (data->fan_min[n] == 0)
 356                 data->alarm_mask &= (n == 0) ? ~0x20 : ~0x40;
 357         else
 358                 data->alarm_mask |= (n == 0) ? 0x20 : 0x40;
 359         data->beep_mask &= data->alarm_mask;
 360         gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
 361
 362         mutex_unlock(&data->update_lock);
 363         return count;
 364 }
 365
 366 static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 367                            const char *buf, size_t count)
 368 {
 369         struct i2c_client *client = to_i2c_client(dev);
 370         struct gl520_data *data = i2c_get_clientdata(client);
 371         int n = to_sensor_dev_attr(attr)->index;
 372         u8 r;
 373         unsigned long v;
 374         int err;
 375
 376         err = kstrtoul(buf, 10, &v);
 377         if (err)
 378                 return err;
 379
 380         switch (v) {
 381         case 1:
 382                 r = 0;
 383                 break;
 384         case 2:
 385                 r = 1;
 386                 break;
 387         case 4:
 388                 r = 2;
 389                 break;
 390         case 8:
 391                 r = 3;
 392                 break;
 393         default:
 394                 dev_err(&client->dev,
 395         "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v);
 396                 return -EINVAL;
 397         }
 398
 399         mutex_lock(&data->update_lock);
 400         data->fan_div[n] = r;
 401
 402         if (n == 0)
 403                 gl520_write_value(client, GL520_REG_FAN_DIV,
 404                                   (gl520_read_value(client, GL520_REG_FAN_DIV)
 405                                    & ~0xc0) | (r << 6));
 406         else
 407                 gl520_write_value(client, GL520_REG_FAN_DIV,
 408                                   (gl520_read_value(client, GL520_REG_FAN_DIV)
 409                                    & ~0x30) | (r << 4));
 410
 411         mutex_unlock(&data->update_lock);
 412         return count;
 413 }
 414
 415 static ssize_t set_fan_off(struct device *dev, struct device_attribute *attr,
 416                            const char *buf, size_t count)
 417 {
 418         struct i2c_client *client = to_i2c_client(dev);
 419         struct gl520_data *data = i2c_get_clientdata(client);
 420         u8 r;
 421         unsigned long v;
 422         int err;
 423
 424         err = kstrtoul(buf, 10, &v);
 425         if (err)
 426                 return err;
 427
 428         r = (v ? 1 : 0);
 429
 430         mutex_lock(&data->update_lock);
 431         data->fan_off = r;
 432         gl520_write_value(client, GL520_REG_FAN_OFF,
 433                           (gl520_read_value(client, GL520_REG_FAN_OFF)
 434                            & ~0x0c) | (r << 2));
 435         mutex_unlock(&data->update_lock);
 436         return count;
 437 }
 438
 439 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan_input, NULL, 0);
 440 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan_input, NULL, 1);
 441 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 442                 get_fan_min, set_fan_min, 0);
 443 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 444                 get_fan_min, set_fan_min, 1);
 445 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
 446                 get_fan_div, set_fan_div, 0);
 447 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
 448                 get_fan_div, set_fan_div, 1);
 449 static DEVICE_ATTR(fan1_off, S_IRUGO | S_IWUSR,
 450                 get_fan_off, set_fan_off);
 451
 452 #define TEMP_FROM_REG(val) (((val) - 130) * 1000)
 453 #define TEMP_TO_REG(val) SENSORS_LIMIT(((((val) < 0 ? \
 454                         (val) - 500 : (val) + 500) / 1000) + 130), 0, 255)
 455
 456 static ssize_t get_temp_input(struct device *dev, struct device_attribute *attr,
 457                               char *buf)
 458 {
 459         int n = to_sensor_dev_attr(attr)->index;
 460         struct gl520_data *data = gl520_update_device(dev);
 461
 462         return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n]));
 463 }
 464
 465 static ssize_t get_temp_max(struct device *dev, struct device_attribute *attr,
 466                             char *buf)
 467 {
 468         int n = to_sensor_dev_attr(attr)->index;
 469         struct gl520_data *data = gl520_update_device(dev);
 470
 471         return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n]));
 472 }
 473
 474 static ssize_t get_temp_max_hyst(struct device *dev,
 475                                  struct device_attribute *attr, char *buf)
 476 {
 477         int n = to_sensor_dev_attr(attr)->index;
 478         struct gl520_data *data = gl520_update_device(dev);
 479
 480         return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n]));
 481 }
 482
 483 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 484                             const char *buf, size_t count)
 485 {
 486         struct i2c_client *client = to_i2c_client(dev);
 487         struct gl520_data *data = i2c_get_clientdata(client);
 488         int n = to_sensor_dev_attr(attr)->index;
 489         long v;
 490         int err;
 491
 492         err = kstrtol(buf, 10, &v);
 493         if (err)
 494                 return err;
 495
 496         mutex_lock(&data->update_lock);
 497         data->temp_max[n] = TEMP_TO_REG(v);
 498         gl520_write_value(client, GL520_REG_TEMP_MAX[n], data->temp_max[n]);
 499         mutex_unlock(&data->update_lock);
 500         return count;
 501 }
 502
 503 static ssize_t set_temp_max_hyst(struct device *dev, struct device_attribute
 504                                  *attr, const char *buf, size_t count)
 505 {
 506         struct i2c_client *client = to_i2c_client(dev);
 507         struct gl520_data *data = i2c_get_clientdata(client);
 508         int n = to_sensor_dev_attr(attr)->index;
 509         long v;
 510         int err;
 511
 512         err = kstrtol(buf, 10, &v);
 513         if (err)
 514                 return err;
 515
 516         mutex_lock(&data->update_lock);
 517         data->temp_max_hyst[n] = TEMP_TO_REG(v);
 518         gl520_write_value(client, GL520_REG_TEMP_MAX_HYST[n],
 519                           data->temp_max_hyst[n]);
 520         mutex_unlock(&data->update_lock);
 521         return count;
 522 }
 523
 524 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, get_temp_input, NULL, 0);
 525 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, get_temp_input, NULL, 1);
 526 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
 527                 get_temp_max, set_temp_max, 0);
 528 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR,
 529                 get_temp_max, set_temp_max, 1);
 530 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
 531                 get_temp_max_hyst, set_temp_max_hyst, 0);
 532 static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR,
 533                 get_temp_max_hyst, set_temp_max_hyst, 1);
 534
 535 static ssize_t get_alarms(struct device *dev, struct device_attribute *attr,
 536                           char *buf)
 537 {
 538         struct gl520_data *data = gl520_update_device(dev);
 539         return sprintf(buf, "%d\n", data->alarms);
 540 }
 541
 542 static ssize_t get_beep_enable(struct device *dev, struct device_attribute
 543                                *attr, char *buf)
 544 {
 545         struct gl520_data *data = gl520_update_device(dev);
 546         return sprintf(buf, "%d\n", data->beep_enable);
 547 }
 548
 549 static ssize_t get_beep_mask(struct device *dev, struct device_attribute *attr,
 550                              char *buf)
 551 {
 552         struct gl520_data *data = gl520_update_device(dev);
 553         return sprintf(buf, "%d\n", data->beep_mask);
 554 }
 555
 556 static ssize_t set_beep_enable(struct device *dev, struct device_attribute
 557                                *attr, const char *buf, size_t count)
 558 {
 559         struct i2c_client *client = to_i2c_client(dev);
 560         struct gl520_data *data = i2c_get_clientdata(client);
 561         u8 r;
 562         unsigned long v;
 563         int err;
 564
 565         err = kstrtoul(buf, 10, &v);
 566         if (err)
 567                 return err;
 568
 569         r = (v ? 0 : 1);
 570
 571         mutex_lock(&data->update_lock);
 572         data->beep_enable = !r;
 573         gl520_write_value(client, GL520_REG_BEEP_ENABLE,
 574                           (gl520_read_value(client, GL520_REG_BEEP_ENABLE)
 575                            & ~0x04) | (r << 2));
 576         mutex_unlock(&data->update_lock);
 577         return count;
 578 }
 579
 580 static ssize_t set_beep_mask(struct device *dev, struct device_attribute *attr,
 581                              const char *buf, size_t count)
 582 {
 583         struct i2c_client *client = to_i2c_client(dev);
 584         struct gl520_data *data = i2c_get_clientdata(client);
 585         unsigned long r;
 586         int err;
 587
 588         err = kstrtoul(buf, 10, &r);
 589         if (err)
 590                 return err;
 591
 592         mutex_lock(&data->update_lock);
 593         r &= data->alarm_mask;
 594         data->beep_mask = r;
 595         gl520_write_value(client, GL520_REG_BEEP_MASK, r);
 596         mutex_unlock(&data->update_lock);
 597         return count;
 598 }
 599
 600 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 601 static DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
 602                 get_beep_enable, set_beep_enable);
 603 static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
 604                 get_beep_mask, set_beep_mask);
 605
 606 static ssize_t get_alarm(struct device *dev, struct device_attribute *attr,
 607                          char *buf)
 608 {
 609         int bit_nr = to_sensor_dev_attr(attr)->index;
 610         struct gl520_data *data = gl520_update_device(dev);
 611
 612         return sprintf(buf, "%d\n", (data->alarms >> bit_nr) & 1);
 613 }
 614
 615 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, get_alarm, NULL, 0);
 616 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, get_alarm, NULL, 1);
 617 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, get_alarm, NULL, 2);
 618 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, get_alarm, NULL, 3);
 619 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, get_alarm, NULL, 4);
 620 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, get_alarm, NULL, 5);
 621 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, get_alarm, NULL, 6);
 622 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, get_alarm, NULL, 7);
 623 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, get_alarm, NULL, 7);
 624
 625 static ssize_t get_beep(struct device *dev, struct device_attribute *attr,
 626                         char *buf)
 627 {
 628         int bitnr = to_sensor_dev_attr(attr)->index;
 629         struct gl520_data *data = gl520_update_device(dev);
 630
 631         return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1);
 632 }
 633
 634 static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
 635                         const char *buf, size_t count)
 636 {
 637         struct i2c_client *client = to_i2c_client(dev);
 638         struct gl520_data *data = i2c_get_clientdata(client);
 639         int bitnr = to_sensor_dev_attr(attr)->index;
 640         unsigned long bit;
 641
 642         int err;
 643
 644         err = kstrtoul(buf, 10, &bit);
 645         if (err)
 646                 return err;
 647         if (bit & ~1)
 648                 return -EINVAL;
 649
 650         mutex_lock(&data->update_lock);
 651         data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
 652         if (bit)
 653                 data->beep_mask |= (1 << bitnr);
 654         else
 655                 data->beep_mask &= ~(1 << bitnr);
 656         gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
 657         mutex_unlock(&data->update_lock);
 658         return count;
 659 }
 660
 661 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 0);
 662 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 1);
 663 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 2);
 664 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 3);
 665 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 4);
 666 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 5);
 667 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 6);
 668 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 7);
 669 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, get_beep, set_beep, 7);
 670
 671 static struct attribute *gl520_attributes[] = {
 672         &dev_attr_cpu0_vid.attr,
 673
 674         &sensor_dev_attr_in0_input.dev_attr.attr,
 675         &sensor_dev_attr_in0_min.dev_attr.attr,
 676         &sensor_dev_attr_in0_max.dev_attr.attr,
 677         &sensor_dev_attr_in0_alarm.dev_attr.attr,
 678         &sensor_dev_attr_in0_beep.dev_attr.attr,
 679         &sensor_dev_attr_in1_input.dev_attr.attr,
 680         &sensor_dev_attr_in1_min.dev_attr.attr,
 681         &sensor_dev_attr_in1_max.dev_attr.attr,
 682         &sensor_dev_attr_in1_alarm.dev_attr.attr,
 683         &sensor_dev_attr_in1_beep.dev_attr.attr,
 684         &sensor_dev_attr_in2_input.dev_attr.attr,
 685         &sensor_dev_attr_in2_min.dev_attr.attr,
 686         &sensor_dev_attr_in2_max.dev_attr.attr,
 687         &sensor_dev_attr_in2_alarm.dev_attr.attr,
 688         &sensor_dev_attr_in2_beep.dev_attr.attr,
 689         &sensor_dev_attr_in3_input.dev_attr.attr,
 690         &sensor_dev_attr_in3_min.dev_attr.attr,
 691         &sensor_dev_attr_in3_max.dev_attr.attr,
 692         &sensor_dev_attr_in3_alarm.dev_attr.attr,
 693         &sensor_dev_attr_in3_beep.dev_attr.attr,
 694
 695         &sensor_dev_attr_fan1_input.dev_attr.attr,
 696         &sensor_dev_attr_fan1_min.dev_attr.attr,
 697         &sensor_dev_attr_fan1_div.dev_attr.attr,
 698         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
 699         &sensor_dev_attr_fan1_beep.dev_attr.attr,
 700         &dev_attr_fan1_off.attr,
 701         &sensor_dev_attr_fan2_input.dev_attr.attr,
 702         &sensor_dev_attr_fan2_min.dev_attr.attr,
 703         &sensor_dev_attr_fan2_div.dev_attr.attr,
 704         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
 705         &sensor_dev_attr_fan2_beep.dev_attr.attr,
 706
 707         &sensor_dev_attr_temp1_input.dev_attr.attr,
 708         &sensor_dev_attr_temp1_max.dev_attr.attr,
 709         &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
 710         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 711         &sensor_dev_attr_temp1_beep.dev_attr.attr,
 712
 713         &dev_attr_alarms.attr,
 714         &dev_attr_beep_enable.attr,
 715         &dev_attr_beep_mask.attr,
 716         NULL
 717 };
 718
 719 static const struct attribute_group gl520_group = {
 720         .attrs = gl520_attributes,
 721 };
 722
 723 static struct attribute *gl520_attributes_in4[] = {
 724         &sensor_dev_attr_in4_input.dev_attr.attr,
 725         &sensor_dev_attr_in4_min.dev_attr.attr,
 726         &sensor_dev_attr_in4_max.dev_attr.attr,
 727         &sensor_dev_attr_in4_alarm.dev_attr.attr,
 728         &sensor_dev_attr_in4_beep.dev_attr.attr,
 729         NULL
 730 };
 731
 732 static struct attribute *gl520_attributes_temp2[] = {
 733         &sensor_dev_attr_temp2_input.dev_attr.attr,
 734         &sensor_dev_attr_temp2_max.dev_attr.attr,
 735         &sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
 736         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
 737         &sensor_dev_attr_temp2_beep.dev_attr.attr,
 738         NULL
 739 };
 740
 741 static const struct attribute_group gl520_group_in4 = {
 742         .attrs = gl520_attributes_in4,
 743 };
 744
 745 static const struct attribute_group gl520_group_temp2 = {
 746         .attrs = gl520_attributes_temp2,
 747 };
 748
 749
 750 /*
 751  * Real code
 752  */
 753
 754 /* Return 0 if detection is successful, -ENODEV otherwise */
 755 static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info)
 756 {
 757         struct i2c_adapter *adapter = client->adapter;
 758
 759         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 760                                      I2C_FUNC_SMBUS_WORD_DATA))
 761                 return -ENODEV;
 762
 763         /* Determine the chip type. */
 764         if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
 765             ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
 766             ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
 767                 dev_dbg(&client->dev, "Unknown chip type, skipping\n");
 768                 return -ENODEV;
 769         }
 770
 771         strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
 772
 773         return 0;
 774 }
 775
 776 static int gl520_probe(struct i2c_client *client,
 777                        const struct i2c_device_id *id)
 778 {
 779         struct gl520_data *data;
 780         int err;
 781
 782         data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL);
 783         if (!data) {
 784                 err = -ENOMEM;
 785                 goto exit;
 786         }
 787
 788         i2c_set_clientdata(client, data);
 789         mutex_init(&data->update_lock);
 790
 791         /* Initialize the GL520SM chip */
 792         gl520_init_client(client);
 793
 794         /* Register sysfs hooks */
 795         err = sysfs_create_group(&client->dev.kobj, &gl520_group);
 796         if (err)
 797                 goto exit_free;
 798
 799         if (data->two_temps)
 800                 err = sysfs_create_group(&client->dev.kobj, &gl520_group_temp2);
 801         else
 802                 err = sysfs_create_group(&client->dev.kobj, &gl520_group_in4);
 803
 804         if (err)
 805                 goto exit_remove_files;
 806
 807         data->hwmon_dev = hwmon_device_register(&client->dev);
 808         if (IS_ERR(data->hwmon_dev)) {
 809                 err = PTR_ERR(data->hwmon_dev);
 810                 goto exit_remove_files;
 811         }
 812
 813         return 0;
 814
 815 exit_remove_files:
 816         sysfs_remove_group(&client->dev.kobj, &gl520_group);
 817         sysfs_remove_group(&client->dev.kobj, &gl520_group_in4);
 818         sysfs_remove_group(&client->dev.kobj, &gl520_group_temp2);
 819 exit_free:
 820         kfree(data);
 821 exit:
 822         return err;
 823 }
 824
 825
 826 /* Called when we have found a new GL520SM. */
 827 static void gl520_init_client(struct i2c_client *client)
 828 {
 829         struct gl520_data *data = i2c_get_clientdata(client);
 830         u8 oldconf, conf;
 831
 832         conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
 833
 834         data->alarm_mask = 0xff;
 835         data->vrm = vid_which_vrm();
 836
 837         if (extra_sensor_type == 1)
 838                 conf &= ~0x10;
 839         else if (extra_sensor_type == 2)
 840                 conf |= 0x10;
 841         data->two_temps = !(conf & 0x10);
 842
 843         /* If IRQ# is disabled, we can safely force comparator mode */
 844         if (!(conf & 0x20))
 845                 conf &= 0xf7;
 846
 847         /* Enable monitoring if needed */
 848         conf |= 0x40;
 849
 850         if (conf != oldconf)
 851                 gl520_write_value(client, GL520_REG_CONF, conf);
 852
 853         gl520_update_device(&(client->dev));
 854
 855         if (data->fan_min[0] == 0)
 856                 data->alarm_mask &= ~0x20;
 857         if (data->fan_min[1] == 0)
 858                 data->alarm_mask &= ~0x40;
 859
 860         data->beep_mask &= data->alarm_mask;
 861         gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
 862 }
 863
 864 static int gl520_remove(struct i2c_client *client)
 865 {
 866         struct gl520_data *data = i2c_get_clientdata(client);
 867
 868         hwmon_device_unregister(data->hwmon_dev);
 869         sysfs_remove_group(&client->dev.kobj, &gl520_group);
 870         sysfs_remove_group(&client->dev.kobj, &gl520_group_in4);
 871         sysfs_remove_group(&client->dev.kobj, &gl520_group_temp2);
 872
 873         kfree(data);
 874         return 0;
 875 }
 876
 877
 878 /*
 879  * Registers 0x07 to 0x0c are word-sized, others are byte-sized
 880  * GL520 uses a high-byte first convention
 881  */
 882 static int gl520_read_value(struct i2c_client *client, u8 reg)
 883 {
 884         if ((reg >= 0x07) && (reg <= 0x0c))
 885                 return i2c_smbus_read_word_swapped(client, reg);
 886         else
 887                 return i2c_smbus_read_byte_data(client, reg);
 888 }
 889
 890 static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
 891 {
 892         if ((reg >= 0x07) && (reg <= 0x0c))
 893                 return i2c_smbus_write_word_swapped(client, reg, value);
 894         else
 895                 return i2c_smbus_write_byte_data(client, reg, value);
 896 }
 897
 898
 899 static struct gl520_data *gl520_update_device(struct device *dev)
 900 {
 901         struct i2c_client *client = to_i2c_client(dev);
 902         struct gl520_data *data = i2c_get_clientdata(client);
 903         int val, i;
 904
 905         mutex_lock(&data->update_lock);
 906
 907         if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 908
 909                 dev_dbg(&client->dev, "Starting gl520sm update\n");
 910
 911                 data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
 912                 data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
 913                 data->vid = gl520_read_value(client,
 914                                              GL520_REG_VID_INPUT) & 0x1f;
 915
 916                 for (i = 0; i < 4; i++) {
 917                         data->in_input[i] = gl520_read_value(client,
 918                                                         GL520_REG_IN_INPUT[i]);
 919                         val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]);
 920                         data->in_min[i] = val & 0xff;
 921                         data->in_max[i] = (val >> 8) & 0xff;
 922                 }
 923
 924                 val = gl520_read_value(client, GL520_REG_FAN_INPUT);
 925                 data->fan_input[0] = (val >> 8) & 0xff;
 926                 data->fan_input[1] = val & 0xff;
 927
 928                 val = gl520_read_value(client, GL520_REG_FAN_MIN);
 929                 data->fan_min[0] = (val >> 8) & 0xff;
 930                 data->fan_min[1] = val & 0xff;
 931
 932                 data->temp_input[0] = gl520_read_value(client,
 933                                                 GL520_REG_TEMP_INPUT[0]);
 934                 data->temp_max[0] = gl520_read_value(client,
 935                                                 GL520_REG_TEMP_MAX[0]);
 936                 data->temp_max_hyst[0] = gl520_read_value(client,
 937                                                 GL520_REG_TEMP_MAX_HYST[0]);
 938
 939                 val = gl520_read_value(client, GL520_REG_FAN_DIV);
 940                 data->fan_div[0] = (val >> 6) & 0x03;
 941                 data->fan_div[1] = (val >> 4) & 0x03;
 942                 data->fan_off = (val >> 2) & 0x01;
 943
 944                 data->alarms &= data->alarm_mask;
 945
 946                 val = gl520_read_value(client, GL520_REG_CONF);
 947                 data->beep_enable = !((val >> 2) & 1);
 948
 949                 /* Temp1 and Vin4 are the same input */
 950                 if (data->two_temps) {
 951                         data->temp_input[1] = gl520_read_value(client,
 952                                                 GL520_REG_TEMP_INPUT[1]);
 953                         data->temp_max[1] = gl520_read_value(client,
 954                                                 GL520_REG_TEMP_MAX[1]);
 955                         data->temp_max_hyst[1] = gl520_read_value(client,
 956                                                 GL520_REG_TEMP_MAX_HYST[1]);
 957                 } else {
 958                         data->in_input[4] = gl520_read_value(client,
 959                                                 GL520_REG_IN_INPUT[4]);
 960                         data->in_min[4] = gl520_read_value(client,
 961                                                 GL520_REG_IN_MIN[4]);
 962                         data->in_max[4] = gl520_read_value(client,
 963                                                 GL520_REG_IN_MAX[4]);
 964                 }
 965
 966                 data->last_updated = jiffies;
 967                 data->valid = 1;
 968         }
 969
 970         mutex_unlock(&data->update_lock);
 971
 972         return data;
 973 }
 974
 975 module_i2c_driver(gl520_driver);
 976
 977 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
 978         "Kyösti Mälkki <kmalkki@cc.hut.fi>, "
 979         "Maarten Deprez <maartendeprez@users.sourceforge.net>");
 980 MODULE_DESCRIPTION("GL520SM driver");
 981 MODULE_LICENSE("GPL");