Merge branch 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel...
[linux-2.6/cjktty.git] / arch / x86 / kernel / io_apic.c
blob74917658b004aea2eb08dca5c5c9ba8a775eb81e
1 /*
2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
15 * Fixes
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
18 * and Rolf G. Tews
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
23 #include <linux/mm.h>
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/compiler.h>
31 #include <linux/acpi.h>
32 #include <linux/module.h>
33 #include <linux/sysdev.h>
34 #include <linux/msi.h>
35 #include <linux/htirq.h>
36 #include <linux/freezer.h>
37 #include <linux/kthread.h>
38 #include <linux/jiffies.h> /* time_after() */
39 #ifdef CONFIG_ACPI
40 #include <acpi/acpi_bus.h>
41 #endif
42 #include <linux/bootmem.h>
43 #include <linux/dmar.h>
44 #include <linux/hpet.h>
46 #include <asm/idle.h>
47 #include <asm/io.h>
48 #include <asm/smp.h>
49 #include <asm/desc.h>
50 #include <asm/proto.h>
51 #include <asm/acpi.h>
52 #include <asm/dma.h>
53 #include <asm/timer.h>
54 #include <asm/i8259.h>
55 #include <asm/nmi.h>
56 #include <asm/msidef.h>
57 #include <asm/hypertransport.h>
58 #include <asm/setup.h>
59 #include <asm/irq_remapping.h>
60 #include <asm/hpet.h>
61 #include <asm/uv/uv_hub.h>
62 #include <asm/uv/uv_irq.h>
64 #include <mach_ipi.h>
65 #include <mach_apic.h>
66 #include <mach_apicdef.h>
68 #define __apicdebuginit(type) static type __init
71 * Is the SiS APIC rmw bug present ?
72 * -1 = don't know, 0 = no, 1 = yes
74 int sis_apic_bug = -1;
76 static DEFINE_SPINLOCK(ioapic_lock);
77 static DEFINE_SPINLOCK(vector_lock);
80 * # of IRQ routing registers
82 int nr_ioapic_registers[MAX_IO_APICS];
84 /* I/O APIC entries */
85 struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
86 int nr_ioapics;
88 /* MP IRQ source entries */
89 struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
91 /* # of MP IRQ source entries */
92 int mp_irq_entries;
94 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
95 int mp_bus_id_to_type[MAX_MP_BUSSES];
96 #endif
98 DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
100 int skip_ioapic_setup;
102 static int __init parse_noapic(char *str)
104 /* disable IO-APIC */
105 disable_ioapic_setup();
106 return 0;
108 early_param("noapic", parse_noapic);
110 struct irq_pin_list;
113 * This is performance-critical, we want to do it O(1)
115 * the indexing order of this array favors 1:1 mappings
116 * between pins and IRQs.
119 struct irq_pin_list {
120 int apic, pin;
121 struct irq_pin_list *next;
124 static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
126 struct irq_pin_list *pin;
127 int node;
129 node = cpu_to_node(cpu);
131 pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
132 printk(KERN_DEBUG " alloc irq_2_pin on cpu %d node %d\n", cpu, node);
134 return pin;
137 struct irq_cfg {
138 struct irq_pin_list *irq_2_pin;
139 cpumask_t domain;
140 cpumask_t old_domain;
141 unsigned move_cleanup_count;
142 u8 vector;
143 u8 move_in_progress : 1;
144 #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
145 u8 move_desc_pending : 1;
146 #endif
149 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
150 #ifdef CONFIG_SPARSE_IRQ
151 static struct irq_cfg irq_cfgx[] = {
152 #else
153 static struct irq_cfg irq_cfgx[NR_IRQS] = {
154 #endif
155 [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, },
156 [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, },
157 [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, },
158 [3] = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR, },
159 [4] = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR, },
160 [5] = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR, },
161 [6] = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR, },
162 [7] = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR, },
163 [8] = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR, },
164 [9] = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR, },
165 [10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
166 [11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
167 [12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
168 [13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
169 [14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
170 [15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
173 int __init arch_early_irq_init(void)
175 struct irq_cfg *cfg;
176 struct irq_desc *desc;
177 int count;
178 int i;
180 cfg = irq_cfgx;
181 count = ARRAY_SIZE(irq_cfgx);
183 for (i = 0; i < count; i++) {
184 desc = irq_to_desc(i);
185 desc->chip_data = &cfg[i];
188 return 0;
191 #ifdef CONFIG_SPARSE_IRQ
192 static struct irq_cfg *irq_cfg(unsigned int irq)
194 struct irq_cfg *cfg = NULL;
195 struct irq_desc *desc;
197 desc = irq_to_desc(irq);
198 if (desc)
199 cfg = desc->chip_data;
201 return cfg;
204 static struct irq_cfg *get_one_free_irq_cfg(int cpu)
206 struct irq_cfg *cfg;
207 int node;
209 node = cpu_to_node(cpu);
211 cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
212 printk(KERN_DEBUG " alloc irq_cfg on cpu %d node %d\n", cpu, node);
214 return cfg;
217 int arch_init_chip_data(struct irq_desc *desc, int cpu)
219 struct irq_cfg *cfg;
221 cfg = desc->chip_data;
222 if (!cfg) {
223 desc->chip_data = get_one_free_irq_cfg(cpu);
224 if (!desc->chip_data) {
225 printk(KERN_ERR "can not alloc irq_cfg\n");
226 BUG_ON(1);
230 return 0;
233 #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
235 static void
236 init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
238 struct irq_pin_list *old_entry, *head, *tail, *entry;
240 cfg->irq_2_pin = NULL;
241 old_entry = old_cfg->irq_2_pin;
242 if (!old_entry)
243 return;
245 entry = get_one_free_irq_2_pin(cpu);
246 if (!entry)
247 return;
249 entry->apic = old_entry->apic;
250 entry->pin = old_entry->pin;
251 head = entry;
252 tail = entry;
253 old_entry = old_entry->next;
254 while (old_entry) {
255 entry = get_one_free_irq_2_pin(cpu);
256 if (!entry) {
257 entry = head;
258 while (entry) {
259 head = entry->next;
260 kfree(entry);
261 entry = head;
263 /* still use the old one */
264 return;
266 entry->apic = old_entry->apic;
267 entry->pin = old_entry->pin;
268 tail->next = entry;
269 tail = entry;
270 old_entry = old_entry->next;
273 tail->next = NULL;
274 cfg->irq_2_pin = head;
277 static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg)
279 struct irq_pin_list *entry, *next;
281 if (old_cfg->irq_2_pin == cfg->irq_2_pin)
282 return;
284 entry = old_cfg->irq_2_pin;
286 while (entry) {
287 next = entry->next;
288 kfree(entry);
289 entry = next;
291 old_cfg->irq_2_pin = NULL;
294 void arch_init_copy_chip_data(struct irq_desc *old_desc,
295 struct irq_desc *desc, int cpu)
297 struct irq_cfg *cfg;
298 struct irq_cfg *old_cfg;
300 cfg = get_one_free_irq_cfg(cpu);
302 if (!cfg)
303 return;
305 desc->chip_data = cfg;
307 old_cfg = old_desc->chip_data;
309 memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
311 init_copy_irq_2_pin(old_cfg, cfg, cpu);
314 static void free_irq_cfg(struct irq_cfg *old_cfg)
316 kfree(old_cfg);
319 void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
321 struct irq_cfg *old_cfg, *cfg;
323 old_cfg = old_desc->chip_data;
324 cfg = desc->chip_data;
326 if (old_cfg == cfg)
327 return;
329 if (old_cfg) {
330 free_irq_2_pin(old_cfg, cfg);
331 free_irq_cfg(old_cfg);
332 old_desc->chip_data = NULL;
336 static void set_extra_move_desc(struct irq_desc *desc, cpumask_t mask)
338 struct irq_cfg *cfg = desc->chip_data;
340 if (!cfg->move_in_progress) {
341 /* it means that domain is not changed */
342 if (!cpus_intersects(desc->affinity, mask))
343 cfg->move_desc_pending = 1;
346 #endif
348 #else
349 static struct irq_cfg *irq_cfg(unsigned int irq)
351 return irq < nr_irqs ? irq_cfgx + irq : NULL;
354 #endif
356 #ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
357 static inline void set_extra_move_desc(struct irq_desc *desc, cpumask_t mask)
360 #endif
362 struct io_apic {
363 unsigned int index;
364 unsigned int unused[3];
365 unsigned int data;
368 static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
370 return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
371 + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
374 static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
376 struct io_apic __iomem *io_apic = io_apic_base(apic);
377 writel(reg, &io_apic->index);
378 return readl(&io_apic->data);
381 static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
383 struct io_apic __iomem *io_apic = io_apic_base(apic);
384 writel(reg, &io_apic->index);
385 writel(value, &io_apic->data);
389 * Re-write a value: to be used for read-modify-write
390 * cycles where the read already set up the index register.
392 * Older SiS APIC requires we rewrite the index register
394 static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
396 struct io_apic __iomem *io_apic = io_apic_base(apic);
398 if (sis_apic_bug)
399 writel(reg, &io_apic->index);
400 writel(value, &io_apic->data);
403 static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
405 struct irq_pin_list *entry;
406 unsigned long flags;
408 spin_lock_irqsave(&ioapic_lock, flags);
409 entry = cfg->irq_2_pin;
410 for (;;) {
411 unsigned int reg;
412 int pin;
414 if (!entry)
415 break;
416 pin = entry->pin;
417 reg = io_apic_read(entry->apic, 0x10 + pin*2);
418 /* Is the remote IRR bit set? */
419 if (reg & IO_APIC_REDIR_REMOTE_IRR) {
420 spin_unlock_irqrestore(&ioapic_lock, flags);
421 return true;
423 if (!entry->next)
424 break;
425 entry = entry->next;
427 spin_unlock_irqrestore(&ioapic_lock, flags);
429 return false;
432 union entry_union {
433 struct { u32 w1, w2; };
434 struct IO_APIC_route_entry entry;
437 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
439 union entry_union eu;
440 unsigned long flags;
441 spin_lock_irqsave(&ioapic_lock, flags);
442 eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
443 eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
444 spin_unlock_irqrestore(&ioapic_lock, flags);
445 return eu.entry;
449 * When we write a new IO APIC routing entry, we need to write the high
450 * word first! If the mask bit in the low word is clear, we will enable
451 * the interrupt, and we need to make sure the entry is fully populated
452 * before that happens.
454 static void
455 __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
457 union entry_union eu;
458 eu.entry = e;
459 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
460 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
463 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
465 unsigned long flags;
466 spin_lock_irqsave(&ioapic_lock, flags);
467 __ioapic_write_entry(apic, pin, e);
468 spin_unlock_irqrestore(&ioapic_lock, flags);
472 * When we mask an IO APIC routing entry, we need to write the low
473 * word first, in order to set the mask bit before we change the
474 * high bits!
476 static void ioapic_mask_entry(int apic, int pin)
478 unsigned long flags;
479 union entry_union eu = { .entry.mask = 1 };
481 spin_lock_irqsave(&ioapic_lock, flags);
482 io_apic_write(apic, 0x10 + 2*pin, eu.w1);
483 io_apic_write(apic, 0x11 + 2*pin, eu.w2);
484 spin_unlock_irqrestore(&ioapic_lock, flags);
487 #ifdef CONFIG_SMP
488 static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
490 int apic, pin;
491 struct irq_pin_list *entry;
492 u8 vector = cfg->vector;
494 entry = cfg->irq_2_pin;
495 for (;;) {
496 unsigned int reg;
498 if (!entry)
499 break;
501 apic = entry->apic;
502 pin = entry->pin;
503 #ifdef CONFIG_INTR_REMAP
505 * With interrupt-remapping, destination information comes
506 * from interrupt-remapping table entry.
508 if (!irq_remapped(irq))
509 io_apic_write(apic, 0x11 + pin*2, dest);
510 #else
511 io_apic_write(apic, 0x11 + pin*2, dest);
512 #endif
513 reg = io_apic_read(apic, 0x10 + pin*2);
514 reg &= ~IO_APIC_REDIR_VECTOR_MASK;
515 reg |= vector;
516 io_apic_modify(apic, 0x10 + pin*2, reg);
517 if (!entry->next)
518 break;
519 entry = entry->next;
523 static int assign_irq_vector(int irq, struct irq_cfg *cfg, cpumask_t mask);
525 static void set_ioapic_affinity_irq_desc(struct irq_desc *desc, cpumask_t mask)
527 struct irq_cfg *cfg;
528 unsigned long flags;
529 unsigned int dest;
530 cpumask_t tmp;
531 unsigned int irq;
533 cpus_and(tmp, mask, cpu_online_map);
534 if (cpus_empty(tmp))
535 return;
537 irq = desc->irq;
538 cfg = desc->chip_data;
539 if (assign_irq_vector(irq, cfg, mask))
540 return;
542 set_extra_move_desc(desc, mask);
544 cpus_and(tmp, cfg->domain, mask);
545 dest = cpu_mask_to_apicid(tmp);
547 * Only the high 8 bits are valid.
549 dest = SET_APIC_LOGICAL_ID(dest);
551 spin_lock_irqsave(&ioapic_lock, flags);
552 __target_IO_APIC_irq(irq, dest, cfg);
553 desc->affinity = mask;
554 spin_unlock_irqrestore(&ioapic_lock, flags);
557 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
559 struct irq_desc *desc;
561 desc = irq_to_desc(irq);
563 set_ioapic_affinity_irq_desc(desc, mask);
565 #endif /* CONFIG_SMP */
568 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
569 * shared ISA-space IRQs, so we have to support them. We are super
570 * fast in the common case, and fast for shared ISA-space IRQs.
572 static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
574 struct irq_pin_list *entry;
576 entry = cfg->irq_2_pin;
577 if (!entry) {
578 entry = get_one_free_irq_2_pin(cpu);
579 if (!entry) {
580 printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
581 apic, pin);
582 return;
584 cfg->irq_2_pin = entry;
585 entry->apic = apic;
586 entry->pin = pin;
587 return;
590 while (entry->next) {
591 /* not again, please */
592 if (entry->apic == apic && entry->pin == pin)
593 return;
595 entry = entry->next;
598 entry->next = get_one_free_irq_2_pin(cpu);
599 entry = entry->next;
600 entry->apic = apic;
601 entry->pin = pin;
605 * Reroute an IRQ to a different pin.
607 static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
608 int oldapic, int oldpin,
609 int newapic, int newpin)
611 struct irq_pin_list *entry = cfg->irq_2_pin;
612 int replaced = 0;
614 while (entry) {
615 if (entry->apic == oldapic && entry->pin == oldpin) {
616 entry->apic = newapic;
617 entry->pin = newpin;
618 replaced = 1;
619 /* every one is different, right? */
620 break;
622 entry = entry->next;
625 /* why? call replace before add? */
626 if (!replaced)
627 add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
630 static inline void io_apic_modify_irq(struct irq_cfg *cfg,
631 int mask_and, int mask_or,
632 void (*final)(struct irq_pin_list *entry))
634 int pin;
635 struct irq_pin_list *entry;
637 for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
638 unsigned int reg;
639 pin = entry->pin;
640 reg = io_apic_read(entry->apic, 0x10 + pin * 2);
641 reg &= mask_and;
642 reg |= mask_or;
643 io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
644 if (final)
645 final(entry);
649 static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
651 io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
654 #ifdef CONFIG_X86_64
655 void io_apic_sync(struct irq_pin_list *entry)
658 * Synchronize the IO-APIC and the CPU by doing
659 * a dummy read from the IO-APIC
661 struct io_apic __iomem *io_apic;
662 io_apic = io_apic_base(entry->apic);
663 readl(&io_apic->data);
666 static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
668 io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
670 #else /* CONFIG_X86_32 */
671 static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
673 io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
676 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
678 io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
679 IO_APIC_REDIR_MASKED, NULL);
682 static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
684 io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
685 IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
687 #endif /* CONFIG_X86_32 */
689 static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
691 struct irq_cfg *cfg = desc->chip_data;
692 unsigned long flags;
694 BUG_ON(!cfg);
696 spin_lock_irqsave(&ioapic_lock, flags);
697 __mask_IO_APIC_irq(cfg);
698 spin_unlock_irqrestore(&ioapic_lock, flags);
701 static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
703 struct irq_cfg *cfg = desc->chip_data;
704 unsigned long flags;
706 spin_lock_irqsave(&ioapic_lock, flags);
707 __unmask_IO_APIC_irq(cfg);
708 spin_unlock_irqrestore(&ioapic_lock, flags);
711 static void mask_IO_APIC_irq(unsigned int irq)
713 struct irq_desc *desc = irq_to_desc(irq);
715 mask_IO_APIC_irq_desc(desc);
717 static void unmask_IO_APIC_irq(unsigned int irq)
719 struct irq_desc *desc = irq_to_desc(irq);
721 unmask_IO_APIC_irq_desc(desc);
724 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
726 struct IO_APIC_route_entry entry;
728 /* Check delivery_mode to be sure we're not clearing an SMI pin */
729 entry = ioapic_read_entry(apic, pin);
730 if (entry.delivery_mode == dest_SMI)
731 return;
733 * Disable it in the IO-APIC irq-routing table:
735 ioapic_mask_entry(apic, pin);
738 static void clear_IO_APIC (void)
740 int apic, pin;
742 for (apic = 0; apic < nr_ioapics; apic++)
743 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
744 clear_IO_APIC_pin(apic, pin);
747 #if !defined(CONFIG_SMP) && defined(CONFIG_X86_32)
748 void send_IPI_self(int vector)
750 unsigned int cfg;
753 * Wait for idle.
755 apic_wait_icr_idle();
756 cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL;
758 * Send the IPI. The write to APIC_ICR fires this off.
760 apic_write(APIC_ICR, cfg);
762 #endif /* !CONFIG_SMP && CONFIG_X86_32*/
764 #ifdef CONFIG_X86_32
766 * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
767 * specific CPU-side IRQs.
770 #define MAX_PIRQS 8
771 static int pirq_entries [MAX_PIRQS];
772 static int pirqs_enabled;
774 static int __init ioapic_pirq_setup(char *str)
776 int i, max;
777 int ints[MAX_PIRQS+1];
779 get_options(str, ARRAY_SIZE(ints), ints);
781 for (i = 0; i < MAX_PIRQS; i++)
782 pirq_entries[i] = -1;
784 pirqs_enabled = 1;
785 apic_printk(APIC_VERBOSE, KERN_INFO
786 "PIRQ redirection, working around broken MP-BIOS.\n");
787 max = MAX_PIRQS;
788 if (ints[0] < MAX_PIRQS)
789 max = ints[0];
791 for (i = 0; i < max; i++) {
792 apic_printk(APIC_VERBOSE, KERN_DEBUG
793 "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
795 * PIRQs are mapped upside down, usually.
797 pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
799 return 1;
802 __setup("pirq=", ioapic_pirq_setup);
803 #endif /* CONFIG_X86_32 */
805 #ifdef CONFIG_INTR_REMAP
806 /* I/O APIC RTE contents at the OS boot up */
807 static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
810 * Saves and masks all the unmasked IO-APIC RTE's
812 int save_mask_IO_APIC_setup(void)
814 union IO_APIC_reg_01 reg_01;
815 unsigned long flags;
816 int apic, pin;
819 * The number of IO-APIC IRQ registers (== #pins):
821 for (apic = 0; apic < nr_ioapics; apic++) {
822 spin_lock_irqsave(&ioapic_lock, flags);
823 reg_01.raw = io_apic_read(apic, 1);
824 spin_unlock_irqrestore(&ioapic_lock, flags);
825 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
828 for (apic = 0; apic < nr_ioapics; apic++) {
829 early_ioapic_entries[apic] =
830 kzalloc(sizeof(struct IO_APIC_route_entry) *
831 nr_ioapic_registers[apic], GFP_KERNEL);
832 if (!early_ioapic_entries[apic])
833 goto nomem;
836 for (apic = 0; apic < nr_ioapics; apic++)
837 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
838 struct IO_APIC_route_entry entry;
840 entry = early_ioapic_entries[apic][pin] =
841 ioapic_read_entry(apic, pin);
842 if (!entry.mask) {
843 entry.mask = 1;
844 ioapic_write_entry(apic, pin, entry);
848 return 0;
850 nomem:
851 while (apic >= 0)
852 kfree(early_ioapic_entries[apic--]);
853 memset(early_ioapic_entries, 0,
854 ARRAY_SIZE(early_ioapic_entries));
856 return -ENOMEM;
859 void restore_IO_APIC_setup(void)
861 int apic, pin;
863 for (apic = 0; apic < nr_ioapics; apic++) {
864 if (!early_ioapic_entries[apic])
865 break;
866 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
867 ioapic_write_entry(apic, pin,
868 early_ioapic_entries[apic][pin]);
869 kfree(early_ioapic_entries[apic]);
870 early_ioapic_entries[apic] = NULL;
874 void reinit_intr_remapped_IO_APIC(int intr_remapping)
877 * for now plain restore of previous settings.
878 * TBD: In the case of OS enabling interrupt-remapping,
879 * IO-APIC RTE's need to be setup to point to interrupt-remapping
880 * table entries. for now, do a plain restore, and wait for
881 * the setup_IO_APIC_irqs() to do proper initialization.
883 restore_IO_APIC_setup();
885 #endif
888 * Find the IRQ entry number of a certain pin.
890 static int find_irq_entry(int apic, int pin, int type)
892 int i;
894 for (i = 0; i < mp_irq_entries; i++)
895 if (mp_irqs[i].mp_irqtype == type &&
896 (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
897 mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
898 mp_irqs[i].mp_dstirq == pin)
899 return i;
901 return -1;
905 * Find the pin to which IRQ[irq] (ISA) is connected
907 static int __init find_isa_irq_pin(int irq, int type)
909 int i;
911 for (i = 0; i < mp_irq_entries; i++) {
912 int lbus = mp_irqs[i].mp_srcbus;
914 if (test_bit(lbus, mp_bus_not_pci) &&
915 (mp_irqs[i].mp_irqtype == type) &&
916 (mp_irqs[i].mp_srcbusirq == irq))
918 return mp_irqs[i].mp_dstirq;
920 return -1;
923 static int __init find_isa_irq_apic(int irq, int type)
925 int i;
927 for (i = 0; i < mp_irq_entries; i++) {
928 int lbus = mp_irqs[i].mp_srcbus;
930 if (test_bit(lbus, mp_bus_not_pci) &&
931 (mp_irqs[i].mp_irqtype == type) &&
932 (mp_irqs[i].mp_srcbusirq == irq))
933 break;
935 if (i < mp_irq_entries) {
936 int apic;
937 for(apic = 0; apic < nr_ioapics; apic++) {
938 if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
939 return apic;
943 return -1;
947 * Find a specific PCI IRQ entry.
948 * Not an __init, possibly needed by modules
950 static int pin_2_irq(int idx, int apic, int pin);
952 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
954 int apic, i, best_guess = -1;
956 apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
957 bus, slot, pin);
958 if (test_bit(bus, mp_bus_not_pci)) {
959 apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
960 return -1;
962 for (i = 0; i < mp_irq_entries; i++) {
963 int lbus = mp_irqs[i].mp_srcbus;
965 for (apic = 0; apic < nr_ioapics; apic++)
966 if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
967 mp_irqs[i].mp_dstapic == MP_APIC_ALL)
968 break;
970 if (!test_bit(lbus, mp_bus_not_pci) &&
971 !mp_irqs[i].mp_irqtype &&
972 (bus == lbus) &&
973 (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
974 int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
976 if (!(apic || IO_APIC_IRQ(irq)))
977 continue;
979 if (pin == (mp_irqs[i].mp_srcbusirq & 3))
980 return irq;
982 * Use the first all-but-pin matching entry as a
983 * best-guess fuzzy result for broken mptables.
985 if (best_guess < 0)
986 best_guess = irq;
989 return best_guess;
992 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
994 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
996 * EISA Edge/Level control register, ELCR
998 static int EISA_ELCR(unsigned int irq)
1000 if (irq < NR_IRQS_LEGACY) {
1001 unsigned int port = 0x4d0 + (irq >> 3);
1002 return (inb(port) >> (irq & 7)) & 1;
1004 apic_printk(APIC_VERBOSE, KERN_INFO
1005 "Broken MPtable reports ISA irq %d\n", irq);
1006 return 0;
1009 #endif
1011 /* ISA interrupts are always polarity zero edge triggered,
1012 * when listed as conforming in the MP table. */
1014 #define default_ISA_trigger(idx) (0)
1015 #define default_ISA_polarity(idx) (0)
1017 /* EISA interrupts are always polarity zero and can be edge or level
1018 * trigger depending on the ELCR value. If an interrupt is listed as
1019 * EISA conforming in the MP table, that means its trigger type must
1020 * be read in from the ELCR */
1022 #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
1023 #define default_EISA_polarity(idx) default_ISA_polarity(idx)
1025 /* PCI interrupts are always polarity one level triggered,
1026 * when listed as conforming in the MP table. */
1028 #define default_PCI_trigger(idx) (1)
1029 #define default_PCI_polarity(idx) (1)
1031 /* MCA interrupts are always polarity zero level triggered,
1032 * when listed as conforming in the MP table. */
1034 #define default_MCA_trigger(idx) (1)
1035 #define default_MCA_polarity(idx) default_ISA_polarity(idx)
1037 static int MPBIOS_polarity(int idx)
1039 int bus = mp_irqs[idx].mp_srcbus;
1040 int polarity;
1043 * Determine IRQ line polarity (high active or low active):
1045 switch (mp_irqs[idx].mp_irqflag & 3)
1047 case 0: /* conforms, ie. bus-type dependent polarity */
1048 if (test_bit(bus, mp_bus_not_pci))
1049 polarity = default_ISA_polarity(idx);
1050 else
1051 polarity = default_PCI_polarity(idx);
1052 break;
1053 case 1: /* high active */
1055 polarity = 0;
1056 break;
1058 case 2: /* reserved */
1060 printk(KERN_WARNING "broken BIOS!!\n");
1061 polarity = 1;
1062 break;
1064 case 3: /* low active */
1066 polarity = 1;
1067 break;
1069 default: /* invalid */
1071 printk(KERN_WARNING "broken BIOS!!\n");
1072 polarity = 1;
1073 break;
1076 return polarity;
1079 static int MPBIOS_trigger(int idx)
1081 int bus = mp_irqs[idx].mp_srcbus;
1082 int trigger;
1085 * Determine IRQ trigger mode (edge or level sensitive):
1087 switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
1089 case 0: /* conforms, ie. bus-type dependent */
1090 if (test_bit(bus, mp_bus_not_pci))
1091 trigger = default_ISA_trigger(idx);
1092 else
1093 trigger = default_PCI_trigger(idx);
1094 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
1095 switch (mp_bus_id_to_type[bus]) {
1096 case MP_BUS_ISA: /* ISA pin */
1098 /* set before the switch */
1099 break;
1101 case MP_BUS_EISA: /* EISA pin */
1103 trigger = default_EISA_trigger(idx);
1104 break;
1106 case MP_BUS_PCI: /* PCI pin */
1108 /* set before the switch */
1109 break;
1111 case MP_BUS_MCA: /* MCA pin */
1113 trigger = default_MCA_trigger(idx);
1114 break;
1116 default:
1118 printk(KERN_WARNING "broken BIOS!!\n");
1119 trigger = 1;
1120 break;
1123 #endif
1124 break;
1125 case 1: /* edge */
1127 trigger = 0;
1128 break;
1130 case 2: /* reserved */
1132 printk(KERN_WARNING "broken BIOS!!\n");
1133 trigger = 1;
1134 break;
1136 case 3: /* level */
1138 trigger = 1;
1139 break;
1141 default: /* invalid */
1143 printk(KERN_WARNING "broken BIOS!!\n");
1144 trigger = 0;
1145 break;
1148 return trigger;
1151 static inline int irq_polarity(int idx)
1153 return MPBIOS_polarity(idx);
1156 static inline int irq_trigger(int idx)
1158 return MPBIOS_trigger(idx);
1161 int (*ioapic_renumber_irq)(int ioapic, int irq);
1162 static int pin_2_irq(int idx, int apic, int pin)
1164 int irq, i;
1165 int bus = mp_irqs[idx].mp_srcbus;
1168 * Debugging check, we are in big trouble if this message pops up!
1170 if (mp_irqs[idx].mp_dstirq != pin)
1171 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
1173 if (test_bit(bus, mp_bus_not_pci)) {
1174 irq = mp_irqs[idx].mp_srcbusirq;
1175 } else {
1177 * PCI IRQs are mapped in order
1179 i = irq = 0;
1180 while (i < apic)
1181 irq += nr_ioapic_registers[i++];
1182 irq += pin;
1184 * For MPS mode, so far only needed by ES7000 platform
1186 if (ioapic_renumber_irq)
1187 irq = ioapic_renumber_irq(apic, irq);
1190 #ifdef CONFIG_X86_32
1192 * PCI IRQ command line redirection. Yes, limits are hardcoded.
1194 if ((pin >= 16) && (pin <= 23)) {
1195 if (pirq_entries[pin-16] != -1) {
1196 if (!pirq_entries[pin-16]) {
1197 apic_printk(APIC_VERBOSE, KERN_DEBUG
1198 "disabling PIRQ%d\n", pin-16);
1199 } else {
1200 irq = pirq_entries[pin-16];
1201 apic_printk(APIC_VERBOSE, KERN_DEBUG
1202 "using PIRQ%d -> IRQ %d\n",
1203 pin-16, irq);
1207 #endif
1209 return irq;
1212 void lock_vector_lock(void)
1214 /* Used to the online set of cpus does not change
1215 * during assign_irq_vector.
1217 spin_lock(&vector_lock);
1220 void unlock_vector_lock(void)
1222 spin_unlock(&vector_lock);
1225 static int __assign_irq_vector(int irq, struct irq_cfg *cfg, cpumask_t mask)
1228 * NOTE! The local APIC isn't very good at handling
1229 * multiple interrupts at the same interrupt level.
1230 * As the interrupt level is determined by taking the
1231 * vector number and shifting that right by 4, we
1232 * want to spread these out a bit so that they don't
1233 * all fall in the same interrupt level.
1235 * Also, we've got to be careful not to trash gate
1236 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1238 static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
1239 unsigned int old_vector;
1240 int cpu;
1242 if ((cfg->move_in_progress) || cfg->move_cleanup_count)
1243 return -EBUSY;
1245 /* Only try and allocate irqs on cpus that are present */
1246 cpus_and(mask, mask, cpu_online_map);
1248 old_vector = cfg->vector;
1249 if (old_vector) {
1250 cpumask_t tmp;
1251 cpus_and(tmp, cfg->domain, mask);
1252 if (!cpus_empty(tmp))
1253 return 0;
1256 for_each_cpu_mask_nr(cpu, mask) {
1257 cpumask_t domain, new_mask;
1258 int new_cpu;
1259 int vector, offset;
1261 domain = vector_allocation_domain(cpu);
1262 cpus_and(new_mask, domain, cpu_online_map);
1264 vector = current_vector;
1265 offset = current_offset;
1266 next:
1267 vector += 8;
1268 if (vector >= first_system_vector) {
1269 /* If we run out of vectors on large boxen, must share them. */
1270 offset = (offset + 1) % 8;
1271 vector = FIRST_DEVICE_VECTOR + offset;
1273 if (unlikely(current_vector == vector))
1274 continue;
1275 #ifdef CONFIG_X86_64
1276 if (vector == IA32_SYSCALL_VECTOR)
1277 goto next;
1278 #else
1279 if (vector == SYSCALL_VECTOR)
1280 goto next;
1281 #endif
1282 for_each_cpu_mask_nr(new_cpu, new_mask)
1283 if (per_cpu(vector_irq, new_cpu)[vector] != -1)
1284 goto next;
1285 /* Found one! */
1286 current_vector = vector;
1287 current_offset = offset;
1288 if (old_vector) {
1289 cfg->move_in_progress = 1;
1290 cfg->old_domain = cfg->domain;
1292 for_each_cpu_mask_nr(new_cpu, new_mask)
1293 per_cpu(vector_irq, new_cpu)[vector] = irq;
1294 cfg->vector = vector;
1295 cfg->domain = domain;
1296 return 0;
1298 return -ENOSPC;
1301 static int assign_irq_vector(int irq, struct irq_cfg *cfg, cpumask_t mask)
1303 int err;
1304 unsigned long flags;
1306 spin_lock_irqsave(&vector_lock, flags);
1307 err = __assign_irq_vector(irq, cfg, mask);
1308 spin_unlock_irqrestore(&vector_lock, flags);
1309 return err;
1312 static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
1314 cpumask_t mask;
1315 int cpu, vector;
1317 BUG_ON(!cfg->vector);
1319 vector = cfg->vector;
1320 cpus_and(mask, cfg->domain, cpu_online_map);
1321 for_each_cpu_mask_nr(cpu, mask)
1322 per_cpu(vector_irq, cpu)[vector] = -1;
1324 cfg->vector = 0;
1325 cpus_clear(cfg->domain);
1327 if (likely(!cfg->move_in_progress))
1328 return;
1329 cpus_and(mask, cfg->old_domain, cpu_online_map);
1330 for_each_cpu_mask_nr(cpu, mask) {
1331 for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
1332 vector++) {
1333 if (per_cpu(vector_irq, cpu)[vector] != irq)
1334 continue;
1335 per_cpu(vector_irq, cpu)[vector] = -1;
1336 break;
1339 cfg->move_in_progress = 0;
1342 void __setup_vector_irq(int cpu)
1344 /* Initialize vector_irq on a new cpu */
1345 /* This function must be called with vector_lock held */
1346 int irq, vector;
1347 struct irq_cfg *cfg;
1348 struct irq_desc *desc;
1350 /* Mark the inuse vectors */
1351 for_each_irq_desc(irq, desc) {
1352 cfg = desc->chip_data;
1353 if (!cpu_isset(cpu, cfg->domain))
1354 continue;
1355 vector = cfg->vector;
1356 per_cpu(vector_irq, cpu)[vector] = irq;
1358 /* Mark the free vectors */
1359 for (vector = 0; vector < NR_VECTORS; ++vector) {
1360 irq = per_cpu(vector_irq, cpu)[vector];
1361 if (irq < 0)
1362 continue;
1364 cfg = irq_cfg(irq);
1365 if (!cpu_isset(cpu, cfg->domain))
1366 per_cpu(vector_irq, cpu)[vector] = -1;
1370 static struct irq_chip ioapic_chip;
1371 #ifdef CONFIG_INTR_REMAP
1372 static struct irq_chip ir_ioapic_chip;
1373 #endif
1375 #define IOAPIC_AUTO -1
1376 #define IOAPIC_EDGE 0
1377 #define IOAPIC_LEVEL 1
1379 #ifdef CONFIG_X86_32
1380 static inline int IO_APIC_irq_trigger(int irq)
1382 int apic, idx, pin;
1384 for (apic = 0; apic < nr_ioapics; apic++) {
1385 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1386 idx = find_irq_entry(apic, pin, mp_INT);
1387 if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin)))
1388 return irq_trigger(idx);
1392 * nonexistent IRQs are edge default
1394 return 0;
1396 #else
1397 static inline int IO_APIC_irq_trigger(int irq)
1399 return 1;
1401 #endif
1403 static void ioapic_register_intr(int irq, struct irq_desc *desc, unsigned long trigger)
1406 if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1407 trigger == IOAPIC_LEVEL)
1408 desc->status |= IRQ_LEVEL;
1409 else
1410 desc->status &= ~IRQ_LEVEL;
1412 #ifdef CONFIG_INTR_REMAP
1413 if (irq_remapped(irq)) {
1414 desc->status |= IRQ_MOVE_PCNTXT;
1415 if (trigger)
1416 set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
1417 handle_fasteoi_irq,
1418 "fasteoi");
1419 else
1420 set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
1421 handle_edge_irq, "edge");
1422 return;
1424 #endif
1425 if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
1426 trigger == IOAPIC_LEVEL)
1427 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1428 handle_fasteoi_irq,
1429 "fasteoi");
1430 else
1431 set_irq_chip_and_handler_name(irq, &ioapic_chip,
1432 handle_edge_irq, "edge");
1435 static int setup_ioapic_entry(int apic, int irq,
1436 struct IO_APIC_route_entry *entry,
1437 unsigned int destination, int trigger,
1438 int polarity, int vector)
1441 * add it to the IO-APIC irq-routing table:
1443 memset(entry,0,sizeof(*entry));
1445 #ifdef CONFIG_INTR_REMAP
1446 if (intr_remapping_enabled) {
1447 struct intel_iommu *iommu = map_ioapic_to_ir(apic);
1448 struct irte irte;
1449 struct IR_IO_APIC_route_entry *ir_entry =
1450 (struct IR_IO_APIC_route_entry *) entry;
1451 int index;
1453 if (!iommu)
1454 panic("No mapping iommu for ioapic %d\n", apic);
1456 index = alloc_irte(iommu, irq, 1);
1457 if (index < 0)
1458 panic("Failed to allocate IRTE for ioapic %d\n", apic);
1460 memset(&irte, 0, sizeof(irte));
1462 irte.present = 1;
1463 irte.dst_mode = INT_DEST_MODE;
1464 irte.trigger_mode = trigger;
1465 irte.dlvry_mode = INT_DELIVERY_MODE;
1466 irte.vector = vector;
1467 irte.dest_id = IRTE_DEST(destination);
1469 modify_irte(irq, &irte);
1471 ir_entry->index2 = (index >> 15) & 0x1;
1472 ir_entry->zero = 0;
1473 ir_entry->format = 1;
1474 ir_entry->index = (index & 0x7fff);
1475 } else
1476 #endif
1478 entry->delivery_mode = INT_DELIVERY_MODE;
1479 entry->dest_mode = INT_DEST_MODE;
1480 entry->dest = destination;
1483 entry->mask = 0; /* enable IRQ */
1484 entry->trigger = trigger;
1485 entry->polarity = polarity;
1486 entry->vector = vector;
1488 /* Mask level triggered irqs.
1489 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
1491 if (trigger)
1492 entry->mask = 1;
1493 return 0;
1496 static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_desc *desc,
1497 int trigger, int polarity)
1499 struct irq_cfg *cfg;
1500 struct IO_APIC_route_entry entry;
1501 cpumask_t mask;
1503 if (!IO_APIC_IRQ(irq))
1504 return;
1506 cfg = desc->chip_data;
1508 mask = TARGET_CPUS;
1509 if (assign_irq_vector(irq, cfg, mask))
1510 return;
1512 cpus_and(mask, cfg->domain, mask);
1514 apic_printk(APIC_VERBOSE,KERN_DEBUG
1515 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
1516 "IRQ %d Mode:%i Active:%i)\n",
1517 apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
1518 irq, trigger, polarity);
1521 if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
1522 cpu_mask_to_apicid(mask), trigger, polarity,
1523 cfg->vector)) {
1524 printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
1525 mp_ioapics[apic].mp_apicid, pin);
1526 __clear_irq_vector(irq, cfg);
1527 return;
1530 ioapic_register_intr(irq, desc, trigger);
1531 if (irq < NR_IRQS_LEGACY)
1532 disable_8259A_irq(irq);
1534 ioapic_write_entry(apic, pin, entry);
1537 static void __init setup_IO_APIC_irqs(void)
1539 int apic, pin, idx, irq;
1540 int notcon = 0;
1541 struct irq_desc *desc;
1542 struct irq_cfg *cfg;
1543 int cpu = boot_cpu_id;
1545 apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
1547 for (apic = 0; apic < nr_ioapics; apic++) {
1548 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1550 idx = find_irq_entry(apic, pin, mp_INT);
1551 if (idx == -1) {
1552 if (!notcon) {
1553 notcon = 1;
1554 apic_printk(APIC_VERBOSE,
1555 KERN_DEBUG " %d-%d",
1556 mp_ioapics[apic].mp_apicid,
1557 pin);
1558 } else
1559 apic_printk(APIC_VERBOSE, " %d-%d",
1560 mp_ioapics[apic].mp_apicid,
1561 pin);
1562 continue;
1564 if (notcon) {
1565 apic_printk(APIC_VERBOSE,
1566 " (apicid-pin) not connected\n");
1567 notcon = 0;
1570 irq = pin_2_irq(idx, apic, pin);
1571 #ifdef CONFIG_X86_32
1572 if (multi_timer_check(apic, irq))
1573 continue;
1574 #endif
1575 desc = irq_to_desc_alloc_cpu(irq, cpu);
1576 if (!desc) {
1577 printk(KERN_INFO "can not get irq_desc for %d\n", irq);
1578 continue;
1580 cfg = desc->chip_data;
1581 add_pin_to_irq_cpu(cfg, cpu, apic, pin);
1583 setup_IO_APIC_irq(apic, pin, irq, desc,
1584 irq_trigger(idx), irq_polarity(idx));
1588 if (notcon)
1589 apic_printk(APIC_VERBOSE,
1590 " (apicid-pin) not connected\n");
1594 * Set up the timer pin, possibly with the 8259A-master behind.
1596 static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin,
1597 int vector)
1599 struct IO_APIC_route_entry entry;
1601 #ifdef CONFIG_INTR_REMAP
1602 if (intr_remapping_enabled)
1603 return;
1604 #endif
1606 memset(&entry, 0, sizeof(entry));
1609 * We use logical delivery to get the timer IRQ
1610 * to the first CPU.
1612 entry.dest_mode = INT_DEST_MODE;
1613 entry.mask = 1; /* mask IRQ now */
1614 entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
1615 entry.delivery_mode = INT_DELIVERY_MODE;
1616 entry.polarity = 0;
1617 entry.trigger = 0;
1618 entry.vector = vector;
1621 * The timer IRQ doesn't have to know that behind the
1622 * scene we may have a 8259A-master in AEOI mode ...
1624 set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
1627 * Add it to the IO-APIC irq-routing table:
1629 ioapic_write_entry(apic, pin, entry);
1633 __apicdebuginit(void) print_IO_APIC(void)
1635 int apic, i;
1636 union IO_APIC_reg_00 reg_00;
1637 union IO_APIC_reg_01 reg_01;
1638 union IO_APIC_reg_02 reg_02;
1639 union IO_APIC_reg_03 reg_03;
1640 unsigned long flags;
1641 struct irq_cfg *cfg;
1642 struct irq_desc *desc;
1643 unsigned int irq;
1645 if (apic_verbosity == APIC_QUIET)
1646 return;
1648 printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
1649 for (i = 0; i < nr_ioapics; i++)
1650 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
1651 mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
1654 * We are a bit conservative about what we expect. We have to
1655 * know about every hardware change ASAP.
1657 printk(KERN_INFO "testing the IO APIC.......................\n");
1659 for (apic = 0; apic < nr_ioapics; apic++) {
1661 spin_lock_irqsave(&ioapic_lock, flags);
1662 reg_00.raw = io_apic_read(apic, 0);
1663 reg_01.raw = io_apic_read(apic, 1);
1664 if (reg_01.bits.version >= 0x10)
1665 reg_02.raw = io_apic_read(apic, 2);
1666 if (reg_01.bits.version >= 0x20)
1667 reg_03.raw = io_apic_read(apic, 3);
1668 spin_unlock_irqrestore(&ioapic_lock, flags);
1670 printk("\n");
1671 printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
1672 printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
1673 printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
1674 printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
1675 printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS);
1677 printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
1678 printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries);
1680 printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ);
1681 printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version);
1684 * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02,
1685 * but the value of reg_02 is read as the previous read register
1686 * value, so ignore it if reg_02 == reg_01.
1688 if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) {
1689 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
1690 printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration);
1694 * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02
1695 * or reg_03, but the value of reg_0[23] is read as the previous read
1696 * register value, so ignore it if reg_03 == reg_0[12].
1698 if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw &&
1699 reg_03.raw != reg_01.raw) {
1700 printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw);
1701 printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT);
1704 printk(KERN_DEBUG ".... IRQ redirection table:\n");
1706 printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
1707 " Stat Dmod Deli Vect: \n");
1709 for (i = 0; i <= reg_01.bits.entries; i++) {
1710 struct IO_APIC_route_entry entry;
1712 entry = ioapic_read_entry(apic, i);
1714 printk(KERN_DEBUG " %02x %03X ",
1716 entry.dest
1719 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1720 entry.mask,
1721 entry.trigger,
1722 entry.irr,
1723 entry.polarity,
1724 entry.delivery_status,
1725 entry.dest_mode,
1726 entry.delivery_mode,
1727 entry.vector
1731 printk(KERN_DEBUG "IRQ to pin mappings:\n");
1732 for_each_irq_desc(irq, desc) {
1733 struct irq_pin_list *entry;
1735 cfg = desc->chip_data;
1736 entry = cfg->irq_2_pin;
1737 if (!entry)
1738 continue;
1739 printk(KERN_DEBUG "IRQ%d ", irq);
1740 for (;;) {
1741 printk("-> %d:%d", entry->apic, entry->pin);
1742 if (!entry->next)
1743 break;
1744 entry = entry->next;
1746 printk("\n");
1749 printk(KERN_INFO ".................................... done.\n");
1751 return;
1754 __apicdebuginit(void) print_APIC_bitfield(int base)
1756 unsigned int v;
1757 int i, j;
1759 if (apic_verbosity == APIC_QUIET)
1760 return;
1762 printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
1763 for (i = 0; i < 8; i++) {
1764 v = apic_read(base + i*0x10);
1765 for (j = 0; j < 32; j++) {
1766 if (v & (1<<j))
1767 printk("1");
1768 else
1769 printk("0");
1771 printk("\n");
1775 __apicdebuginit(void) print_local_APIC(void *dummy)
1777 unsigned int v, ver, maxlvt;
1778 u64 icr;
1780 if (apic_verbosity == APIC_QUIET)
1781 return;
1783 printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
1784 smp_processor_id(), hard_smp_processor_id());
1785 v = apic_read(APIC_ID);
1786 printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
1787 v = apic_read(APIC_LVR);
1788 printk(KERN_INFO "... APIC VERSION: %08x\n", v);
1789 ver = GET_APIC_VERSION(v);
1790 maxlvt = lapic_get_maxlvt();
1792 v = apic_read(APIC_TASKPRI);
1793 printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
1795 if (APIC_INTEGRATED(ver)) { /* !82489DX */
1796 if (!APIC_XAPIC(ver)) {
1797 v = apic_read(APIC_ARBPRI);
1798 printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
1799 v & APIC_ARBPRI_MASK);
1801 v = apic_read(APIC_PROCPRI);
1802 printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
1806 * Remote read supported only in the 82489DX and local APIC for
1807 * Pentium processors.
1809 if (!APIC_INTEGRATED(ver) || maxlvt == 3) {
1810 v = apic_read(APIC_RRR);
1811 printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
1814 v = apic_read(APIC_LDR);
1815 printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
1816 if (!x2apic_enabled()) {
1817 v = apic_read(APIC_DFR);
1818 printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
1820 v = apic_read(APIC_SPIV);
1821 printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
1823 printk(KERN_DEBUG "... APIC ISR field:\n");
1824 print_APIC_bitfield(APIC_ISR);
1825 printk(KERN_DEBUG "... APIC TMR field:\n");
1826 print_APIC_bitfield(APIC_TMR);
1827 printk(KERN_DEBUG "... APIC IRR field:\n");
1828 print_APIC_bitfield(APIC_IRR);
1830 if (APIC_INTEGRATED(ver)) { /* !82489DX */
1831 if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
1832 apic_write(APIC_ESR, 0);
1834 v = apic_read(APIC_ESR);
1835 printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
1838 icr = apic_icr_read();
1839 printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
1840 printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
1842 v = apic_read(APIC_LVTT);
1843 printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
1845 if (maxlvt > 3) { /* PC is LVT#4. */
1846 v = apic_read(APIC_LVTPC);
1847 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
1849 v = apic_read(APIC_LVT0);
1850 printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
1851 v = apic_read(APIC_LVT1);
1852 printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
1854 if (maxlvt > 2) { /* ERR is LVT#3. */
1855 v = apic_read(APIC_LVTERR);
1856 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
1859 v = apic_read(APIC_TMICT);
1860 printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
1861 v = apic_read(APIC_TMCCT);
1862 printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
1863 v = apic_read(APIC_TDCR);
1864 printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
1865 printk("\n");
1868 __apicdebuginit(void) print_all_local_APICs(void)
1870 int cpu;
1872 preempt_disable();
1873 for_each_online_cpu(cpu)
1874 smp_call_function_single(cpu, print_local_APIC, NULL, 1);
1875 preempt_enable();
1878 __apicdebuginit(void) print_PIC(void)
1880 unsigned int v;
1881 unsigned long flags;
1883 if (apic_verbosity == APIC_QUIET)
1884 return;
1886 printk(KERN_DEBUG "\nprinting PIC contents\n");
1888 spin_lock_irqsave(&i8259A_lock, flags);
1890 v = inb(0xa1) << 8 | inb(0x21);
1891 printk(KERN_DEBUG "... PIC IMR: %04x\n", v);
1893 v = inb(0xa0) << 8 | inb(0x20);
1894 printk(KERN_DEBUG "... PIC IRR: %04x\n", v);
1896 outb(0x0b,0xa0);
1897 outb(0x0b,0x20);
1898 v = inb(0xa0) << 8 | inb(0x20);
1899 outb(0x0a,0xa0);
1900 outb(0x0a,0x20);
1902 spin_unlock_irqrestore(&i8259A_lock, flags);
1904 printk(KERN_DEBUG "... PIC ISR: %04x\n", v);
1906 v = inb(0x4d1) << 8 | inb(0x4d0);
1907 printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1910 __apicdebuginit(int) print_all_ICs(void)
1912 print_PIC();
1913 print_all_local_APICs();
1914 print_IO_APIC();
1916 return 0;
1919 fs_initcall(print_all_ICs);
1922 /* Where if anywhere is the i8259 connect in external int mode */
1923 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
1925 void __init enable_IO_APIC(void)
1927 union IO_APIC_reg_01 reg_01;
1928 int i8259_apic, i8259_pin;
1929 int apic;
1930 unsigned long flags;
1932 #ifdef CONFIG_X86_32
1933 int i;
1934 if (!pirqs_enabled)
1935 for (i = 0; i < MAX_PIRQS; i++)
1936 pirq_entries[i] = -1;
1937 #endif
1940 * The number of IO-APIC IRQ registers (== #pins):
1942 for (apic = 0; apic < nr_ioapics; apic++) {
1943 spin_lock_irqsave(&ioapic_lock, flags);
1944 reg_01.raw = io_apic_read(apic, 1);
1945 spin_unlock_irqrestore(&ioapic_lock, flags);
1946 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1948 for(apic = 0; apic < nr_ioapics; apic++) {
1949 int pin;
1950 /* See if any of the pins is in ExtINT mode */
1951 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1952 struct IO_APIC_route_entry entry;
1953 entry = ioapic_read_entry(apic, pin);
1955 /* If the interrupt line is enabled and in ExtInt mode
1956 * I have found the pin where the i8259 is connected.
1958 if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1959 ioapic_i8259.apic = apic;
1960 ioapic_i8259.pin = pin;
1961 goto found_i8259;
1965 found_i8259:
1966 /* Look to see what if the MP table has reported the ExtINT */
1967 /* If we could not find the appropriate pin by looking at the ioapic
1968 * the i8259 probably is not connected the ioapic but give the
1969 * mptable a chance anyway.
1971 i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
1972 i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1973 /* Trust the MP table if nothing is setup in the hardware */
1974 if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1975 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1976 ioapic_i8259.pin = i8259_pin;
1977 ioapic_i8259.apic = i8259_apic;
1979 /* Complain if the MP table and the hardware disagree */
1980 if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1981 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1983 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1987 * Do not trust the IO-APIC being empty at bootup
1989 clear_IO_APIC();
1993 * Not an __init, needed by the reboot code
1995 void disable_IO_APIC(void)
1998 * Clear the IO-APIC before rebooting:
2000 clear_IO_APIC();
2003 * If the i8259 is routed through an IOAPIC
2004 * Put that IOAPIC in virtual wire mode
2005 * so legacy interrupts can be delivered.
2007 if (ioapic_i8259.pin != -1) {
2008 struct IO_APIC_route_entry entry;
2010 memset(&entry, 0, sizeof(entry));
2011 entry.mask = 0; /* Enabled */
2012 entry.trigger = 0; /* Edge */
2013 entry.irr = 0;
2014 entry.polarity = 0; /* High */
2015 entry.delivery_status = 0;
2016 entry.dest_mode = 0; /* Physical */
2017 entry.delivery_mode = dest_ExtINT; /* ExtInt */
2018 entry.vector = 0;
2019 entry.dest = read_apic_id();
2022 * Add it to the IO-APIC irq-routing table:
2024 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
2027 disconnect_bsp_APIC(ioapic_i8259.pin != -1);
2030 #ifdef CONFIG_X86_32
2032 * function to set the IO-APIC physical IDs based on the
2033 * values stored in the MPC table.
2035 * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
2038 static void __init setup_ioapic_ids_from_mpc(void)
2040 union IO_APIC_reg_00 reg_00;
2041 physid_mask_t phys_id_present_map;
2042 int apic;
2043 int i;
2044 unsigned char old_id;
2045 unsigned long flags;
2047 if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
2048 return;
2051 * Don't check I/O APIC IDs for xAPIC systems. They have
2052 * no meaning without the serial APIC bus.
2054 if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
2055 || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
2056 return;
2058 * This is broken; anything with a real cpu count has to
2059 * circumvent this idiocy regardless.
2061 phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map);
2064 * Set the IOAPIC ID to the value stored in the MPC table.
2066 for (apic = 0; apic < nr_ioapics; apic++) {
2068 /* Read the register 0 value */
2069 spin_lock_irqsave(&ioapic_lock, flags);
2070 reg_00.raw = io_apic_read(apic, 0);
2071 spin_unlock_irqrestore(&ioapic_lock, flags);
2073 old_id = mp_ioapics[apic].mp_apicid;
2075 if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
2076 printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
2077 apic, mp_ioapics[apic].mp_apicid);
2078 printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
2079 reg_00.bits.ID);
2080 mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
2084 * Sanity check, is the ID really free? Every APIC in a
2085 * system must have a unique ID or we get lots of nice
2086 * 'stuck on smp_invalidate_needed IPI wait' messages.
2088 if (check_apicid_used(phys_id_present_map,
2089 mp_ioapics[apic].mp_apicid)) {
2090 printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
2091 apic, mp_ioapics[apic].mp_apicid);
2092 for (i = 0; i < get_physical_broadcast(); i++)
2093 if (!physid_isset(i, phys_id_present_map))
2094 break;
2095 if (i >= get_physical_broadcast())
2096 panic("Max APIC ID exceeded!\n");
2097 printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
2099 physid_set(i, phys_id_present_map);
2100 mp_ioapics[apic].mp_apicid = i;
2101 } else {
2102 physid_mask_t tmp;
2103 tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
2104 apic_printk(APIC_VERBOSE, "Setting %d in the "
2105 "phys_id_present_map\n",
2106 mp_ioapics[apic].mp_apicid);
2107 physids_or(phys_id_present_map, phys_id_present_map, tmp);
2112 * We need to adjust the IRQ routing table
2113 * if the ID changed.
2115 if (old_id != mp_ioapics[apic].mp_apicid)
2116 for (i = 0; i < mp_irq_entries; i++)
2117 if (mp_irqs[i].mp_dstapic == old_id)
2118 mp_irqs[i].mp_dstapic
2119 = mp_ioapics[apic].mp_apicid;
2122 * Read the right value from the MPC table and
2123 * write it into the ID register.
2125 apic_printk(APIC_VERBOSE, KERN_INFO
2126 "...changing IO-APIC physical APIC ID to %d ...",
2127 mp_ioapics[apic].mp_apicid);
2129 reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
2130 spin_lock_irqsave(&ioapic_lock, flags);
2131 io_apic_write(apic, 0, reg_00.raw);
2132 spin_unlock_irqrestore(&ioapic_lock, flags);
2135 * Sanity check
2137 spin_lock_irqsave(&ioapic_lock, flags);
2138 reg_00.raw = io_apic_read(apic, 0);
2139 spin_unlock_irqrestore(&ioapic_lock, flags);
2140 if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
2141 printk("could not set ID!\n");
2142 else
2143 apic_printk(APIC_VERBOSE, " ok.\n");
2146 #endif
2148 int no_timer_check __initdata;
2150 static int __init notimercheck(char *s)
2152 no_timer_check = 1;
2153 return 1;
2155 __setup("no_timer_check", notimercheck);
2158 * There is a nasty bug in some older SMP boards, their mptable lies
2159 * about the timer IRQ. We do the following to work around the situation:
2161 * - timer IRQ defaults to IO-APIC IRQ
2162 * - if this function detects that timer IRQs are defunct, then we fall
2163 * back to ISA timer IRQs
2165 static int __init timer_irq_works(void)
2167 unsigned long t1 = jiffies;
2168 unsigned long flags;
2170 if (no_timer_check)
2171 return 1;
2173 local_save_flags(flags);
2174 local_irq_enable();
2175 /* Let ten ticks pass... */
2176 mdelay((10 * 1000) / HZ);
2177 local_irq_restore(flags);
2180 * Expect a few ticks at least, to be sure some possible
2181 * glue logic does not lock up after one or two first
2182 * ticks in a non-ExtINT mode. Also the local APIC
2183 * might have cached one ExtINT interrupt. Finally, at
2184 * least one tick may be lost due to delays.
2187 /* jiffies wrap? */
2188 if (time_after(jiffies, t1 + 4))
2189 return 1;
2190 return 0;
2194 * In the SMP+IOAPIC case it might happen that there are an unspecified
2195 * number of pending IRQ events unhandled. These cases are very rare,
2196 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
2197 * better to do it this way as thus we do not have to be aware of
2198 * 'pending' interrupts in the IRQ path, except at this point.
2201 * Edge triggered needs to resend any interrupt
2202 * that was delayed but this is now handled in the device
2203 * independent code.
2207 * Starting up a edge-triggered IO-APIC interrupt is
2208 * nasty - we need to make sure that we get the edge.
2209 * If it is already asserted for some reason, we need
2210 * return 1 to indicate that is was pending.
2212 * This is not complete - we should be able to fake
2213 * an edge even if it isn't on the 8259A...
2216 static unsigned int startup_ioapic_irq(unsigned int irq)
2218 int was_pending = 0;
2219 unsigned long flags;
2220 struct irq_cfg *cfg;
2222 spin_lock_irqsave(&ioapic_lock, flags);
2223 if (irq < NR_IRQS_LEGACY) {
2224 disable_8259A_irq(irq);
2225 if (i8259A_irq_pending(irq))
2226 was_pending = 1;
2228 cfg = irq_cfg(irq);
2229 __unmask_IO_APIC_irq(cfg);
2230 spin_unlock_irqrestore(&ioapic_lock, flags);
2232 return was_pending;
2235 #ifdef CONFIG_X86_64
2236 static int ioapic_retrigger_irq(unsigned int irq)
2239 struct irq_cfg *cfg = irq_cfg(irq);
2240 unsigned long flags;
2242 spin_lock_irqsave(&vector_lock, flags);
2243 send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
2244 spin_unlock_irqrestore(&vector_lock, flags);
2246 return 1;
2248 #else
2249 static int ioapic_retrigger_irq(unsigned int irq)
2251 send_IPI_self(irq_cfg(irq)->vector);
2253 return 1;
2255 #endif
2258 * Level and edge triggered IO-APIC interrupts need different handling,
2259 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
2260 * handled with the level-triggered descriptor, but that one has slightly
2261 * more overhead. Level-triggered interrupts cannot be handled with the
2262 * edge-triggered handler, without risking IRQ storms and other ugly
2263 * races.
2266 #ifdef CONFIG_SMP
2268 #ifdef CONFIG_INTR_REMAP
2269 static void ir_irq_migration(struct work_struct *work);
2271 static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
2274 * Migrate the IO-APIC irq in the presence of intr-remapping.
2276 * For edge triggered, irq migration is a simple atomic update(of vector
2277 * and cpu destination) of IRTE and flush the hardware cache.
2279 * For level triggered, we need to modify the io-apic RTE aswell with the update
2280 * vector information, along with modifying IRTE with vector and destination.
2281 * So irq migration for level triggered is little bit more complex compared to
2282 * edge triggered migration. But the good news is, we use the same algorithm
2283 * for level triggered migration as we have today, only difference being,
2284 * we now initiate the irq migration from process context instead of the
2285 * interrupt context.
2287 * In future, when we do a directed EOI (combined with cpu EOI broadcast
2288 * suppression) to the IO-APIC, level triggered irq migration will also be
2289 * as simple as edge triggered migration and we can do the irq migration
2290 * with a simple atomic update to IO-APIC RTE.
2292 static void migrate_ioapic_irq_desc(struct irq_desc *desc, cpumask_t mask)
2294 struct irq_cfg *cfg;
2295 cpumask_t tmp, cleanup_mask;
2296 struct irte irte;
2297 int modify_ioapic_rte;
2298 unsigned int dest;
2299 unsigned long flags;
2300 unsigned int irq;
2302 cpus_and(tmp, mask, cpu_online_map);
2303 if (cpus_empty(tmp))
2304 return;
2306 irq = desc->irq;
2307 if (get_irte(irq, &irte))
2308 return;
2310 cfg = desc->chip_data;
2311 if (assign_irq_vector(irq, cfg, mask))
2312 return;
2314 set_extra_move_desc(desc, mask);
2316 cpus_and(tmp, cfg->domain, mask);
2317 dest = cpu_mask_to_apicid(tmp);
2319 modify_ioapic_rte = desc->status & IRQ_LEVEL;
2320 if (modify_ioapic_rte) {
2321 spin_lock_irqsave(&ioapic_lock, flags);
2322 __target_IO_APIC_irq(irq, dest, cfg);
2323 spin_unlock_irqrestore(&ioapic_lock, flags);
2326 irte.vector = cfg->vector;
2327 irte.dest_id = IRTE_DEST(dest);
2330 * Modified the IRTE and flushes the Interrupt entry cache.
2332 modify_irte(irq, &irte);
2334 if (cfg->move_in_progress) {
2335 cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
2336 cfg->move_cleanup_count = cpus_weight(cleanup_mask);
2337 send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
2338 cfg->move_in_progress = 0;
2341 desc->affinity = mask;
2344 static int migrate_irq_remapped_level_desc(struct irq_desc *desc)
2346 int ret = -1;
2347 struct irq_cfg *cfg = desc->chip_data;
2349 mask_IO_APIC_irq_desc(desc);
2351 if (io_apic_level_ack_pending(cfg)) {
2353 * Interrupt in progress. Migrating irq now will change the
2354 * vector information in the IO-APIC RTE and that will confuse
2355 * the EOI broadcast performed by cpu.
2356 * So, delay the irq migration to the next instance.
2358 schedule_delayed_work(&ir_migration_work, 1);
2359 goto unmask;
2362 /* everthing is clear. we have right of way */
2363 migrate_ioapic_irq_desc(desc, desc->pending_mask);
2365 ret = 0;
2366 desc->status &= ~IRQ_MOVE_PENDING;
2367 cpus_clear(desc->pending_mask);
2369 unmask:
2370 unmask_IO_APIC_irq_desc(desc);
2372 return ret;
2375 static void ir_irq_migration(struct work_struct *work)
2377 unsigned int irq;
2378 struct irq_desc *desc;
2380 for_each_irq_desc(irq, desc) {
2381 if (desc->status & IRQ_MOVE_PENDING) {
2382 unsigned long flags;
2384 spin_lock_irqsave(&desc->lock, flags);
2385 if (!desc->chip->set_affinity ||
2386 !(desc->status & IRQ_MOVE_PENDING)) {
2387 desc->status &= ~IRQ_MOVE_PENDING;
2388 spin_unlock_irqrestore(&desc->lock, flags);
2389 continue;
2392 desc->chip->set_affinity(irq, desc->pending_mask);
2393 spin_unlock_irqrestore(&desc->lock, flags);
2399 * Migrates the IRQ destination in the process context.
2401 static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, cpumask_t mask)
2403 if (desc->status & IRQ_LEVEL) {
2404 desc->status |= IRQ_MOVE_PENDING;
2405 desc->pending_mask = mask;
2406 migrate_irq_remapped_level_desc(desc);
2407 return;
2410 migrate_ioapic_irq_desc(desc, mask);
2412 static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
2414 struct irq_desc *desc = irq_to_desc(irq);
2416 set_ir_ioapic_affinity_irq_desc(desc, mask);
2418 #endif
2420 asmlinkage void smp_irq_move_cleanup_interrupt(void)
2422 unsigned vector, me;
2424 ack_APIC_irq();
2425 exit_idle();
2426 irq_enter();
2428 me = smp_processor_id();
2429 for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
2430 unsigned int irq;
2431 struct irq_desc *desc;
2432 struct irq_cfg *cfg;
2433 irq = __get_cpu_var(vector_irq)[vector];
2435 if (irq == -1)
2436 continue;
2438 desc = irq_to_desc(irq);
2439 if (!desc)
2440 continue;
2442 cfg = irq_cfg(irq);
2443 spin_lock(&desc->lock);
2444 if (!cfg->move_cleanup_count)
2445 goto unlock;
2447 if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
2448 goto unlock;
2450 __get_cpu_var(vector_irq)[vector] = -1;
2451 cfg->move_cleanup_count--;
2452 unlock:
2453 spin_unlock(&desc->lock);
2456 irq_exit();
2459 static void irq_complete_move(struct irq_desc **descp)
2461 struct irq_desc *desc = *descp;
2462 struct irq_cfg *cfg = desc->chip_data;
2463 unsigned vector, me;
2465 if (likely(!cfg->move_in_progress)) {
2466 #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
2467 if (likely(!cfg->move_desc_pending))
2468 return;
2470 /* domain has not changed, but affinity did */
2471 me = smp_processor_id();
2472 if (cpu_isset(me, desc->affinity)) {
2473 *descp = desc = move_irq_desc(desc, me);
2474 /* get the new one */
2475 cfg = desc->chip_data;
2476 cfg->move_desc_pending = 0;
2478 #endif
2479 return;
2482 vector = ~get_irq_regs()->orig_ax;
2483 me = smp_processor_id();
2484 if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
2485 cpumask_t cleanup_mask;
2487 #ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
2488 *descp = desc = move_irq_desc(desc, me);
2489 /* get the new one */
2490 cfg = desc->chip_data;
2491 #endif
2493 cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
2494 cfg->move_cleanup_count = cpus_weight(cleanup_mask);
2495 send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
2496 cfg->move_in_progress = 0;
2499 #else
2500 static inline void irq_complete_move(struct irq_desc **descp) {}
2501 #endif
2503 #ifdef CONFIG_INTR_REMAP
2504 static void ack_x2apic_level(unsigned int irq)
2506 ack_x2APIC_irq();
2509 static void ack_x2apic_edge(unsigned int irq)
2511 ack_x2APIC_irq();
2514 #endif
2516 static void ack_apic_edge(unsigned int irq)
2518 struct irq_desc *desc = irq_to_desc(irq);
2520 irq_complete_move(&desc);
2521 move_native_irq(irq);
2522 ack_APIC_irq();
2525 atomic_t irq_mis_count;
2527 static void ack_apic_level(unsigned int irq)
2529 struct irq_desc *desc = irq_to_desc(irq);
2531 #ifdef CONFIG_X86_32
2532 unsigned long v;
2533 int i;
2534 #endif
2535 struct irq_cfg *cfg;
2536 int do_unmask_irq = 0;
2538 irq_complete_move(&desc);
2539 #ifdef CONFIG_GENERIC_PENDING_IRQ
2540 /* If we are moving the irq we need to mask it */
2541 if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
2542 do_unmask_irq = 1;
2543 mask_IO_APIC_irq_desc(desc);
2545 #endif
2547 #ifdef CONFIG_X86_32
2549 * It appears there is an erratum which affects at least version 0x11
2550 * of I/O APIC (that's the 82093AA and cores integrated into various
2551 * chipsets). Under certain conditions a level-triggered interrupt is
2552 * erroneously delivered as edge-triggered one but the respective IRR
2553 * bit gets set nevertheless. As a result the I/O unit expects an EOI
2554 * message but it will never arrive and further interrupts are blocked
2555 * from the source. The exact reason is so far unknown, but the
2556 * phenomenon was observed when two consecutive interrupt requests
2557 * from a given source get delivered to the same CPU and the source is
2558 * temporarily disabled in between.
2560 * A workaround is to simulate an EOI message manually. We achieve it
2561 * by setting the trigger mode to edge and then to level when the edge
2562 * trigger mode gets detected in the TMR of a local APIC for a
2563 * level-triggered interrupt. We mask the source for the time of the
2564 * operation to prevent an edge-triggered interrupt escaping meanwhile.
2565 * The idea is from Manfred Spraul. --macro
2567 cfg = desc->chip_data;
2568 i = cfg->vector;
2570 v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
2571 #endif
2574 * We must acknowledge the irq before we move it or the acknowledge will
2575 * not propagate properly.
2577 ack_APIC_irq();
2579 /* Now we can move and renable the irq */
2580 if (unlikely(do_unmask_irq)) {
2581 /* Only migrate the irq if the ack has been received.
2583 * On rare occasions the broadcast level triggered ack gets
2584 * delayed going to ioapics, and if we reprogram the
2585 * vector while Remote IRR is still set the irq will never
2586 * fire again.
2588 * To prevent this scenario we read the Remote IRR bit
2589 * of the ioapic. This has two effects.
2590 * - On any sane system the read of the ioapic will
2591 * flush writes (and acks) going to the ioapic from
2592 * this cpu.
2593 * - We get to see if the ACK has actually been delivered.
2595 * Based on failed experiments of reprogramming the
2596 * ioapic entry from outside of irq context starting
2597 * with masking the ioapic entry and then polling until
2598 * Remote IRR was clear before reprogramming the
2599 * ioapic I don't trust the Remote IRR bit to be
2600 * completey accurate.
2602 * However there appears to be no other way to plug
2603 * this race, so if the Remote IRR bit is not
2604 * accurate and is causing problems then it is a hardware bug
2605 * and you can go talk to the chipset vendor about it.
2607 cfg = desc->chip_data;
2608 if (!io_apic_level_ack_pending(cfg))
2609 move_masked_irq(irq);
2610 unmask_IO_APIC_irq_desc(desc);
2613 #ifdef CONFIG_X86_32
2614 if (!(v & (1 << (i & 0x1f)))) {
2615 atomic_inc(&irq_mis_count);
2616 spin_lock(&ioapic_lock);
2617 __mask_and_edge_IO_APIC_irq(cfg);
2618 __unmask_and_level_IO_APIC_irq(cfg);
2619 spin_unlock(&ioapic_lock);
2621 #endif
2624 static struct irq_chip ioapic_chip __read_mostly = {
2625 .name = "IO-APIC",
2626 .startup = startup_ioapic_irq,
2627 .mask = mask_IO_APIC_irq,
2628 .unmask = unmask_IO_APIC_irq,
2629 .ack = ack_apic_edge,
2630 .eoi = ack_apic_level,
2631 #ifdef CONFIG_SMP
2632 .set_affinity = set_ioapic_affinity_irq,
2633 #endif
2634 .retrigger = ioapic_retrigger_irq,
2637 #ifdef CONFIG_INTR_REMAP
2638 static struct irq_chip ir_ioapic_chip __read_mostly = {
2639 .name = "IR-IO-APIC",
2640 .startup = startup_ioapic_irq,
2641 .mask = mask_IO_APIC_irq,
2642 .unmask = unmask_IO_APIC_irq,
2643 .ack = ack_x2apic_edge,
2644 .eoi = ack_x2apic_level,
2645 #ifdef CONFIG_SMP
2646 .set_affinity = set_ir_ioapic_affinity_irq,
2647 #endif
2648 .retrigger = ioapic_retrigger_irq,
2650 #endif
2652 static inline void init_IO_APIC_traps(void)
2654 int irq;
2655 struct irq_desc *desc;
2656 struct irq_cfg *cfg;
2659 * NOTE! The local APIC isn't very good at handling
2660 * multiple interrupts at the same interrupt level.
2661 * As the interrupt level is determined by taking the
2662 * vector number and shifting that right by 4, we
2663 * want to spread these out a bit so that they don't
2664 * all fall in the same interrupt level.
2666 * Also, we've got to be careful not to trash gate
2667 * 0x80, because int 0x80 is hm, kind of importantish. ;)
2669 for_each_irq_desc(irq, desc) {
2670 cfg = desc->chip_data;
2671 if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) {
2673 * Hmm.. We don't have an entry for this,
2674 * so default to an old-fashioned 8259
2675 * interrupt if we can..
2677 if (irq < NR_IRQS_LEGACY)
2678 make_8259A_irq(irq);
2679 else
2680 /* Strange. Oh, well.. */
2681 desc->chip = &no_irq_chip;
2687 * The local APIC irq-chip implementation:
2690 static void mask_lapic_irq(unsigned int irq)
2692 unsigned long v;
2694 v = apic_read(APIC_LVT0);
2695 apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
2698 static void unmask_lapic_irq(unsigned int irq)
2700 unsigned long v;
2702 v = apic_read(APIC_LVT0);
2703 apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
2706 static void ack_lapic_irq(unsigned int irq)
2708 ack_APIC_irq();
2711 static struct irq_chip lapic_chip __read_mostly = {
2712 .name = "local-APIC",
2713 .mask = mask_lapic_irq,
2714 .unmask = unmask_lapic_irq,
2715 .ack = ack_lapic_irq,
2718 static void lapic_register_intr(int irq, struct irq_desc *desc)
2720 desc->status &= ~IRQ_LEVEL;
2721 set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq,
2722 "edge");
2725 static void __init setup_nmi(void)
2728 * Dirty trick to enable the NMI watchdog ...
2729 * We put the 8259A master into AEOI mode and
2730 * unmask on all local APICs LVT0 as NMI.
2732 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
2733 * is from Maciej W. Rozycki - so we do not have to EOI from
2734 * the NMI handler or the timer interrupt.
2736 apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
2738 enable_NMI_through_LVT0();
2740 apic_printk(APIC_VERBOSE, " done.\n");
2744 * This looks a bit hackish but it's about the only one way of sending
2745 * a few INTA cycles to 8259As and any associated glue logic. ICR does
2746 * not support the ExtINT mode, unfortunately. We need to send these
2747 * cycles as some i82489DX-based boards have glue logic that keeps the
2748 * 8259A interrupt line asserted until INTA. --macro
2750 static inline void __init unlock_ExtINT_logic(void)
2752 int apic, pin, i;
2753 struct IO_APIC_route_entry entry0, entry1;
2754 unsigned char save_control, save_freq_select;
2756 pin = find_isa_irq_pin(8, mp_INT);
2757 if (pin == -1) {
2758 WARN_ON_ONCE(1);
2759 return;
2761 apic = find_isa_irq_apic(8, mp_INT);
2762 if (apic == -1) {
2763 WARN_ON_ONCE(1);
2764 return;
2767 entry0 = ioapic_read_entry(apic, pin);
2768 clear_IO_APIC_pin(apic, pin);
2770 memset(&entry1, 0, sizeof(entry1));
2772 entry1.dest_mode = 0; /* physical delivery */
2773 entry1.mask = 0; /* unmask IRQ now */
2774 entry1.dest = hard_smp_processor_id();
2775 entry1.delivery_mode = dest_ExtINT;
2776 entry1.polarity = entry0.polarity;
2777 entry1.trigger = 0;
2778 entry1.vector = 0;
2780 ioapic_write_entry(apic, pin, entry1);
2782 save_control = CMOS_READ(RTC_CONTROL);
2783 save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
2784 CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
2785 RTC_FREQ_SELECT);
2786 CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
2788 i = 100;
2789 while (i-- > 0) {
2790 mdelay(10);
2791 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
2792 i -= 10;
2795 CMOS_WRITE(save_control, RTC_CONTROL);
2796 CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
2797 clear_IO_APIC_pin(apic, pin);
2799 ioapic_write_entry(apic, pin, entry0);
2802 static int disable_timer_pin_1 __initdata;
2803 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
2804 static int __init disable_timer_pin_setup(char *arg)
2806 disable_timer_pin_1 = 1;
2807 return 0;
2809 early_param("disable_timer_pin_1", disable_timer_pin_setup);
2811 int timer_through_8259 __initdata;
2814 * This code may look a bit paranoid, but it's supposed to cooperate with
2815 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
2816 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
2817 * fanatically on his truly buggy board.
2819 * FIXME: really need to revamp this for all platforms.
2821 static inline void __init check_timer(void)
2823 struct irq_desc *desc = irq_to_desc(0);
2824 struct irq_cfg *cfg = desc->chip_data;
2825 int cpu = boot_cpu_id;
2826 int apic1, pin1, apic2, pin2;
2827 unsigned long flags;
2828 unsigned int ver;
2829 int no_pin1 = 0;
2831 local_irq_save(flags);
2833 ver = apic_read(APIC_LVR);
2834 ver = GET_APIC_VERSION(ver);
2837 * get/set the timer IRQ vector:
2839 disable_8259A_irq(0);
2840 assign_irq_vector(0, cfg, TARGET_CPUS);
2843 * As IRQ0 is to be enabled in the 8259A, the virtual
2844 * wire has to be disabled in the local APIC. Also
2845 * timer interrupts need to be acknowledged manually in
2846 * the 8259A for the i82489DX when using the NMI
2847 * watchdog as that APIC treats NMIs as level-triggered.
2848 * The AEOI mode will finish them in the 8259A
2849 * automatically.
2851 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
2852 init_8259A(1);
2853 #ifdef CONFIG_X86_32
2854 timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
2855 #endif
2857 pin1 = find_isa_irq_pin(0, mp_INT);
2858 apic1 = find_isa_irq_apic(0, mp_INT);
2859 pin2 = ioapic_i8259.pin;
2860 apic2 = ioapic_i8259.apic;
2862 apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
2863 "apic1=%d pin1=%d apic2=%d pin2=%d\n",
2864 cfg->vector, apic1, pin1, apic2, pin2);
2867 * Some BIOS writers are clueless and report the ExtINTA
2868 * I/O APIC input from the cascaded 8259A as the timer
2869 * interrupt input. So just in case, if only one pin
2870 * was found above, try it both directly and through the
2871 * 8259A.
2873 if (pin1 == -1) {
2874 #ifdef CONFIG_INTR_REMAP
2875 if (intr_remapping_enabled)
2876 panic("BIOS bug: timer not connected to IO-APIC");
2877 #endif
2878 pin1 = pin2;
2879 apic1 = apic2;
2880 no_pin1 = 1;
2881 } else if (pin2 == -1) {
2882 pin2 = pin1;
2883 apic2 = apic1;
2886 if (pin1 != -1) {
2888 * Ok, does IRQ0 through the IOAPIC work?
2890 if (no_pin1) {
2891 add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
2892 setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
2894 unmask_IO_APIC_irq_desc(desc);
2895 if (timer_irq_works()) {
2896 if (nmi_watchdog == NMI_IO_APIC) {
2897 setup_nmi();
2898 enable_8259A_irq(0);
2900 if (disable_timer_pin_1 > 0)
2901 clear_IO_APIC_pin(0, pin1);
2902 goto out;
2904 #ifdef CONFIG_INTR_REMAP
2905 if (intr_remapping_enabled)
2906 panic("timer doesn't work through Interrupt-remapped IO-APIC");
2907 #endif
2908 clear_IO_APIC_pin(apic1, pin1);
2909 if (!no_pin1)
2910 apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
2911 "8254 timer not connected to IO-APIC\n");
2913 apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
2914 "(IRQ0) through the 8259A ...\n");
2915 apic_printk(APIC_QUIET, KERN_INFO
2916 "..... (found apic %d pin %d) ...\n", apic2, pin2);
2918 * legacy devices should be connected to IO APIC #0
2920 replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
2921 setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
2922 unmask_IO_APIC_irq_desc(desc);
2923 enable_8259A_irq(0);
2924 if (timer_irq_works()) {
2925 apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
2926 timer_through_8259 = 1;
2927 if (nmi_watchdog == NMI_IO_APIC) {
2928 disable_8259A_irq(0);
2929 setup_nmi();
2930 enable_8259A_irq(0);
2932 goto out;
2935 * Cleanup, just in case ...
2937 disable_8259A_irq(0);
2938 clear_IO_APIC_pin(apic2, pin2);
2939 apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
2942 if (nmi_watchdog == NMI_IO_APIC) {
2943 apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
2944 "through the IO-APIC - disabling NMI Watchdog!\n");
2945 nmi_watchdog = NMI_NONE;
2947 #ifdef CONFIG_X86_32
2948 timer_ack = 0;
2949 #endif
2951 apic_printk(APIC_QUIET, KERN_INFO
2952 "...trying to set up timer as Virtual Wire IRQ...\n");
2954 lapic_register_intr(0, desc);
2955 apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
2956 enable_8259A_irq(0);
2958 if (timer_irq_works()) {
2959 apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
2960 goto out;
2962 disable_8259A_irq(0);
2963 apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
2964 apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
2966 apic_printk(APIC_QUIET, KERN_INFO
2967 "...trying to set up timer as ExtINT IRQ...\n");
2969 init_8259A(0);
2970 make_8259A_irq(0);
2971 apic_write(APIC_LVT0, APIC_DM_EXTINT);
2973 unlock_ExtINT_logic();
2975 if (timer_irq_works()) {
2976 apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
2977 goto out;
2979 apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
2980 panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a "
2981 "report. Then try booting with the 'noapic' option.\n");
2982 out:
2983 local_irq_restore(flags);
2987 * Traditionally ISA IRQ2 is the cascade IRQ, and is not available
2988 * to devices. However there may be an I/O APIC pin available for
2989 * this interrupt regardless. The pin may be left unconnected, but
2990 * typically it will be reused as an ExtINT cascade interrupt for
2991 * the master 8259A. In the MPS case such a pin will normally be
2992 * reported as an ExtINT interrupt in the MP table. With ACPI
2993 * there is no provision for ExtINT interrupts, and in the absence
2994 * of an override it would be treated as an ordinary ISA I/O APIC
2995 * interrupt, that is edge-triggered and unmasked by default. We
2996 * used to do this, but it caused problems on some systems because
2997 * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using
2998 * the same ExtINT cascade interrupt to drive the local APIC of the
2999 * bootstrap processor. Therefore we refrain from routing IRQ2 to
3000 * the I/O APIC in all cases now. No actual device should request
3001 * it anyway. --macro
3003 #define PIC_IRQS (1 << PIC_CASCADE_IR)
3005 void __init setup_IO_APIC(void)
3008 #ifdef CONFIG_X86_32
3009 enable_IO_APIC();
3010 #else
3012 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
3014 #endif
3016 io_apic_irqs = ~PIC_IRQS;
3018 apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
3020 * Set up IO-APIC IRQ routing.
3022 #ifdef CONFIG_X86_32
3023 if (!acpi_ioapic)
3024 setup_ioapic_ids_from_mpc();
3025 #endif
3026 sync_Arb_IDs();
3027 setup_IO_APIC_irqs();
3028 init_IO_APIC_traps();
3029 check_timer();
3033 * Called after all the initialization is done. If we didnt find any
3034 * APIC bugs then we can allow the modify fast path
3037 static int __init io_apic_bug_finalize(void)
3039 if (sis_apic_bug == -1)
3040 sis_apic_bug = 0;
3041 return 0;
3044 late_initcall(io_apic_bug_finalize);
3046 struct sysfs_ioapic_data {
3047 struct sys_device dev;
3048 struct IO_APIC_route_entry entry[0];
3050 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
3052 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
3054 struct IO_APIC_route_entry *entry;
3055 struct sysfs_ioapic_data *data;
3056 int i;
3058 data = container_of(dev, struct sysfs_ioapic_data, dev);
3059 entry = data->entry;
3060 for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
3061 *entry = ioapic_read_entry(dev->id, i);
3063 return 0;
3066 static int ioapic_resume(struct sys_device *dev)
3068 struct IO_APIC_route_entry *entry;
3069 struct sysfs_ioapic_data *data;
3070 unsigned long flags;
3071 union IO_APIC_reg_00 reg_00;
3072 int i;
3074 data = container_of(dev, struct sysfs_ioapic_data, dev);
3075 entry = data->entry;
3077 spin_lock_irqsave(&ioapic_lock, flags);
3078 reg_00.raw = io_apic_read(dev->id, 0);
3079 if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
3080 reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
3081 io_apic_write(dev->id, 0, reg_00.raw);
3083 spin_unlock_irqrestore(&ioapic_lock, flags);
3084 for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
3085 ioapic_write_entry(dev->id, i, entry[i]);
3087 return 0;
3090 static struct sysdev_class ioapic_sysdev_class = {
3091 .name = "ioapic",
3092 .suspend = ioapic_suspend,
3093 .resume = ioapic_resume,
3096 static int __init ioapic_init_sysfs(void)
3098 struct sys_device * dev;
3099 int i, size, error;
3101 error = sysdev_class_register(&ioapic_sysdev_class);
3102 if (error)
3103 return error;
3105 for (i = 0; i < nr_ioapics; i++ ) {
3106 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
3107 * sizeof(struct IO_APIC_route_entry);
3108 mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL);
3109 if (!mp_ioapic_data[i]) {
3110 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
3111 continue;
3113 dev = &mp_ioapic_data[i]->dev;
3114 dev->id = i;
3115 dev->cls = &ioapic_sysdev_class;
3116 error = sysdev_register(dev);
3117 if (error) {
3118 kfree(mp_ioapic_data[i]);
3119 mp_ioapic_data[i] = NULL;
3120 printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
3121 continue;
3125 return 0;
3128 device_initcall(ioapic_init_sysfs);
3131 * Dynamic irq allocate and deallocation
3133 unsigned int create_irq_nr(unsigned int irq_want)
3135 /* Allocate an unused irq */
3136 unsigned int irq;
3137 unsigned int new;
3138 unsigned long flags;
3139 struct irq_cfg *cfg_new = NULL;
3140 int cpu = boot_cpu_id;
3141 struct irq_desc *desc_new = NULL;
3143 irq = 0;
3144 spin_lock_irqsave(&vector_lock, flags);
3145 for (new = irq_want; new < NR_IRQS; new++) {
3146 if (platform_legacy_irq(new))
3147 continue;
3149 desc_new = irq_to_desc_alloc_cpu(new, cpu);
3150 if (!desc_new) {
3151 printk(KERN_INFO "can not get irq_desc for %d\n", new);
3152 continue;
3154 cfg_new = desc_new->chip_data;
3156 if (cfg_new->vector != 0)
3157 continue;
3158 if (__assign_irq_vector(new, cfg_new, TARGET_CPUS) == 0)
3159 irq = new;
3160 break;
3162 spin_unlock_irqrestore(&vector_lock, flags);
3164 if (irq > 0) {
3165 dynamic_irq_init(irq);
3166 /* restore it, in case dynamic_irq_init clear it */
3167 if (desc_new)
3168 desc_new->chip_data = cfg_new;
3170 return irq;
3173 static int nr_irqs_gsi = NR_IRQS_LEGACY;
3174 int create_irq(void)
3176 unsigned int irq_want;
3177 int irq;
3179 irq_want = nr_irqs_gsi;
3180 irq = create_irq_nr(irq_want);
3182 if (irq == 0)
3183 irq = -1;
3185 return irq;
3188 void destroy_irq(unsigned int irq)
3190 unsigned long flags;
3191 struct irq_cfg *cfg;
3192 struct irq_desc *desc;
3194 /* store it, in case dynamic_irq_cleanup clear it */
3195 desc = irq_to_desc(irq);
3196 cfg = desc->chip_data;
3197 dynamic_irq_cleanup(irq);
3198 /* connect back irq_cfg */
3199 if (desc)
3200 desc->chip_data = cfg;
3202 #ifdef CONFIG_INTR_REMAP
3203 free_irte(irq);
3204 #endif
3205 spin_lock_irqsave(&vector_lock, flags);
3206 __clear_irq_vector(irq, cfg);
3207 spin_unlock_irqrestore(&vector_lock, flags);
3211 * MSI message composition
3213 #ifdef CONFIG_PCI_MSI
3214 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
3216 struct irq_cfg *cfg;
3217 int err;
3218 unsigned dest;
3219 cpumask_t tmp;
3221 cfg = irq_cfg(irq);
3222 tmp = TARGET_CPUS;
3223 err = assign_irq_vector(irq, cfg, tmp);
3224 if (err)
3225 return err;
3227 cpus_and(tmp, cfg->domain, tmp);
3228 dest = cpu_mask_to_apicid(tmp);
3230 #ifdef CONFIG_INTR_REMAP
3231 if (irq_remapped(irq)) {
3232 struct irte irte;
3233 int ir_index;
3234 u16 sub_handle;
3236 ir_index = map_irq_to_irte_handle(irq, &sub_handle);
3237 BUG_ON(ir_index == -1);
3239 memset (&irte, 0, sizeof(irte));
3241 irte.present = 1;
3242 irte.dst_mode = INT_DEST_MODE;
3243 irte.trigger_mode = 0; /* edge */
3244 irte.dlvry_mode = INT_DELIVERY_MODE;
3245 irte.vector = cfg->vector;
3246 irte.dest_id = IRTE_DEST(dest);
3248 modify_irte(irq, &irte);
3250 msg->address_hi = MSI_ADDR_BASE_HI;
3251 msg->data = sub_handle;
3252 msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
3253 MSI_ADDR_IR_SHV |
3254 MSI_ADDR_IR_INDEX1(ir_index) |
3255 MSI_ADDR_IR_INDEX2(ir_index);
3256 } else
3257 #endif
3259 msg->address_hi = MSI_ADDR_BASE_HI;
3260 msg->address_lo =
3261 MSI_ADDR_BASE_LO |
3262 ((INT_DEST_MODE == 0) ?
3263 MSI_ADDR_DEST_MODE_PHYSICAL:
3264 MSI_ADDR_DEST_MODE_LOGICAL) |
3265 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
3266 MSI_ADDR_REDIRECTION_CPU:
3267 MSI_ADDR_REDIRECTION_LOWPRI) |
3268 MSI_ADDR_DEST_ID(dest);
3270 msg->data =
3271 MSI_DATA_TRIGGER_EDGE |
3272 MSI_DATA_LEVEL_ASSERT |
3273 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
3274 MSI_DATA_DELIVERY_FIXED:
3275 MSI_DATA_DELIVERY_LOWPRI) |
3276 MSI_DATA_VECTOR(cfg->vector);
3278 return err;
3281 #ifdef CONFIG_SMP
3282 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
3284 struct irq_desc *desc = irq_to_desc(irq);
3285 struct irq_cfg *cfg;
3286 struct msi_msg msg;
3287 unsigned int dest;
3288 cpumask_t tmp;
3290 cpus_and(tmp, mask, cpu_online_map);
3291 if (cpus_empty(tmp))
3292 return;
3294 cfg = desc->chip_data;
3295 if (assign_irq_vector(irq, cfg, mask))
3296 return;
3298 set_extra_move_desc(desc, mask);
3300 cpus_and(tmp, cfg->domain, mask);
3301 dest = cpu_mask_to_apicid(tmp);
3303 read_msi_msg_desc(desc, &msg);
3305 msg.data &= ~MSI_DATA_VECTOR_MASK;
3306 msg.data |= MSI_DATA_VECTOR(cfg->vector);
3307 msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
3308 msg.address_lo |= MSI_ADDR_DEST_ID(dest);
3310 write_msi_msg_desc(desc, &msg);
3311 desc->affinity = mask;
3313 #ifdef CONFIG_INTR_REMAP
3315 * Migrate the MSI irq to another cpumask. This migration is
3316 * done in the process context using interrupt-remapping hardware.
3318 static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
3320 struct irq_desc *desc = irq_to_desc(irq);
3321 struct irq_cfg *cfg;
3322 unsigned int dest;
3323 cpumask_t tmp, cleanup_mask;
3324 struct irte irte;
3326 cpus_and(tmp, mask, cpu_online_map);
3327 if (cpus_empty(tmp))
3328 return;
3330 if (get_irte(irq, &irte))
3331 return;
3333 cfg = desc->chip_data;
3334 if (assign_irq_vector(irq, cfg, mask))
3335 return;
3337 set_extra_move_desc(desc, mask);
3339 cpus_and(tmp, cfg->domain, mask);
3340 dest = cpu_mask_to_apicid(tmp);
3342 irte.vector = cfg->vector;
3343 irte.dest_id = IRTE_DEST(dest);
3346 * atomically update the IRTE with the new destination and vector.
3348 modify_irte(irq, &irte);
3351 * After this point, all the interrupts will start arriving
3352 * at the new destination. So, time to cleanup the previous
3353 * vector allocation.
3355 if (cfg->move_in_progress) {
3356 cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
3357 cfg->move_cleanup_count = cpus_weight(cleanup_mask);
3358 send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
3359 cfg->move_in_progress = 0;
3362 desc->affinity = mask;
3365 #endif
3366 #endif /* CONFIG_SMP */
3369 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
3370 * which implement the MSI or MSI-X Capability Structure.
3372 static struct irq_chip msi_chip = {
3373 .name = "PCI-MSI",
3374 .unmask = unmask_msi_irq,
3375 .mask = mask_msi_irq,
3376 .ack = ack_apic_edge,
3377 #ifdef CONFIG_SMP
3378 .set_affinity = set_msi_irq_affinity,
3379 #endif
3380 .retrigger = ioapic_retrigger_irq,
3383 #ifdef CONFIG_INTR_REMAP
3384 static struct irq_chip msi_ir_chip = {
3385 .name = "IR-PCI-MSI",
3386 .unmask = unmask_msi_irq,
3387 .mask = mask_msi_irq,
3388 .ack = ack_x2apic_edge,
3389 #ifdef CONFIG_SMP
3390 .set_affinity = ir_set_msi_irq_affinity,
3391 #endif
3392 .retrigger = ioapic_retrigger_irq,
3396 * Map the PCI dev to the corresponding remapping hardware unit
3397 * and allocate 'nvec' consecutive interrupt-remapping table entries
3398 * in it.
3400 static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
3402 struct intel_iommu *iommu;
3403 int index;
3405 iommu = map_dev_to_ir(dev);
3406 if (!iommu) {
3407 printk(KERN_ERR
3408 "Unable to map PCI %s to iommu\n", pci_name(dev));
3409 return -ENOENT;
3412 index = alloc_irte(iommu, irq, nvec);
3413 if (index < 0) {
3414 printk(KERN_ERR
3415 "Unable to allocate %d IRTE for PCI %s\n", nvec,
3416 pci_name(dev));
3417 return -ENOSPC;
3419 return index;
3421 #endif
3423 static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
3425 int ret;
3426 struct msi_msg msg;
3428 ret = msi_compose_msg(dev, irq, &msg);
3429 if (ret < 0)
3430 return ret;
3432 set_irq_msi(irq, msidesc);
3433 write_msi_msg(irq, &msg);
3435 #ifdef CONFIG_INTR_REMAP
3436 if (irq_remapped(irq)) {
3437 struct irq_desc *desc = irq_to_desc(irq);
3439 * irq migration in process context
3441 desc->status |= IRQ_MOVE_PCNTXT;
3442 set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
3443 } else
3444 #endif
3445 set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
3447 dev_printk(KERN_DEBUG, &dev->dev, "irq %d for MSI/MSI-X\n", irq);
3449 return 0;
3452 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc)
3454 unsigned int irq;
3455 int ret;
3456 unsigned int irq_want;
3458 irq_want = nr_irqs_gsi;
3459 irq = create_irq_nr(irq_want);
3460 if (irq == 0)
3461 return -1;
3463 #ifdef CONFIG_INTR_REMAP
3464 if (!intr_remapping_enabled)
3465 goto no_ir;
3467 ret = msi_alloc_irte(dev, irq, 1);
3468 if (ret < 0)
3469 goto error;
3470 no_ir:
3471 #endif
3472 ret = setup_msi_irq(dev, msidesc, irq);
3473 if (ret < 0) {
3474 destroy_irq(irq);
3475 return ret;
3477 return 0;
3479 #ifdef CONFIG_INTR_REMAP
3480 error:
3481 destroy_irq(irq);
3482 return ret;
3483 #endif
3486 int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
3488 unsigned int irq;
3489 int ret, sub_handle;
3490 struct msi_desc *msidesc;
3491 unsigned int irq_want;
3493 #ifdef CONFIG_INTR_REMAP
3494 struct intel_iommu *iommu = 0;
3495 int index = 0;
3496 #endif
3498 irq_want = nr_irqs_gsi;
3499 sub_handle = 0;
3500 list_for_each_entry(msidesc, &dev->msi_list, list) {
3501 irq = create_irq_nr(irq_want);
3502 irq_want++;
3503 if (irq == 0)
3504 return -1;
3505 #ifdef CONFIG_INTR_REMAP
3506 if (!intr_remapping_enabled)
3507 goto no_ir;
3509 if (!sub_handle) {
3511 * allocate the consecutive block of IRTE's
3512 * for 'nvec'
3514 index = msi_alloc_irte(dev, irq, nvec);
3515 if (index < 0) {
3516 ret = index;
3517 goto error;
3519 } else {
3520 iommu = map_dev_to_ir(dev);
3521 if (!iommu) {
3522 ret = -ENOENT;
3523 goto error;
3526 * setup the mapping between the irq and the IRTE
3527 * base index, the sub_handle pointing to the
3528 * appropriate interrupt remap table entry.
3530 set_irte_irq(irq, iommu, index, sub_handle);
3532 no_ir:
3533 #endif
3534 ret = setup_msi_irq(dev, msidesc, irq);
3535 if (ret < 0)
3536 goto error;
3537 sub_handle++;
3539 return 0;
3541 error:
3542 destroy_irq(irq);
3543 return ret;
3546 void arch_teardown_msi_irq(unsigned int irq)
3548 destroy_irq(irq);
3551 #ifdef CONFIG_DMAR
3552 #ifdef CONFIG_SMP
3553 static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask)
3555 struct irq_desc *desc = irq_to_desc(irq);
3556 struct irq_cfg *cfg;
3557 struct msi_msg msg;
3558 unsigned int dest;
3559 cpumask_t tmp;
3561 cpus_and(tmp, mask, cpu_online_map);
3562 if (cpus_empty(tmp))
3563 return;
3565 cfg = desc->chip_data;
3566 if (assign_irq_vector(irq, cfg, mask))
3567 return;
3569 set_extra_move_desc(desc, mask);
3571 cpus_and(tmp, cfg->domain, mask);
3572 dest = cpu_mask_to_apicid(tmp);
3574 dmar_msi_read(irq, &msg);
3576 msg.data &= ~MSI_DATA_VECTOR_MASK;
3577 msg.data |= MSI_DATA_VECTOR(cfg->vector);
3578 msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
3579 msg.address_lo |= MSI_ADDR_DEST_ID(dest);
3581 dmar_msi_write(irq, &msg);
3582 desc->affinity = mask;
3585 #endif /* CONFIG_SMP */
3587 struct irq_chip dmar_msi_type = {
3588 .name = "DMAR_MSI",
3589 .unmask = dmar_msi_unmask,
3590 .mask = dmar_msi_mask,
3591 .ack = ack_apic_edge,
3592 #ifdef CONFIG_SMP
3593 .set_affinity = dmar_msi_set_affinity,
3594 #endif
3595 .retrigger = ioapic_retrigger_irq,
3598 int arch_setup_dmar_msi(unsigned int irq)
3600 int ret;
3601 struct msi_msg msg;
3603 ret = msi_compose_msg(NULL, irq, &msg);
3604 if (ret < 0)
3605 return ret;
3606 dmar_msi_write(irq, &msg);
3607 set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
3608 "edge");
3609 return 0;
3611 #endif
3613 #ifdef CONFIG_HPET_TIMER
3615 #ifdef CONFIG_SMP
3616 static void hpet_msi_set_affinity(unsigned int irq, cpumask_t mask)
3618 struct irq_desc *desc = irq_to_desc(irq);
3619 struct irq_cfg *cfg;
3620 struct msi_msg msg;
3621 unsigned int dest;
3622 cpumask_t tmp;
3624 cpus_and(tmp, mask, cpu_online_map);
3625 if (cpus_empty(tmp))
3626 return;
3628 cfg = desc->chip_data;
3629 if (assign_irq_vector(irq, cfg, mask))
3630 return;
3632 set_extra_move_desc(desc, mask);
3634 cpus_and(tmp, cfg->domain, mask);
3635 dest = cpu_mask_to_apicid(tmp);
3637 hpet_msi_read(irq, &msg);
3639 msg.data &= ~MSI_DATA_VECTOR_MASK;
3640 msg.data |= MSI_DATA_VECTOR(cfg->vector);
3641 msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
3642 msg.address_lo |= MSI_ADDR_DEST_ID(dest);
3644 hpet_msi_write(irq, &msg);
3645 desc->affinity = mask;
3648 #endif /* CONFIG_SMP */
3650 struct irq_chip hpet_msi_type = {
3651 .name = "HPET_MSI",
3652 .unmask = hpet_msi_unmask,
3653 .mask = hpet_msi_mask,
3654 .ack = ack_apic_edge,
3655 #ifdef CONFIG_SMP
3656 .set_affinity = hpet_msi_set_affinity,
3657 #endif
3658 .retrigger = ioapic_retrigger_irq,
3661 int arch_setup_hpet_msi(unsigned int irq)
3663 int ret;
3664 struct msi_msg msg;
3666 ret = msi_compose_msg(NULL, irq, &msg);
3667 if (ret < 0)
3668 return ret;
3670 hpet_msi_write(irq, &msg);
3671 set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
3672 "edge");
3674 return 0;
3676 #endif
3678 #endif /* CONFIG_PCI_MSI */
3680 * Hypertransport interrupt support
3682 #ifdef CONFIG_HT_IRQ
3684 #ifdef CONFIG_SMP
3686 static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
3688 struct ht_irq_msg msg;
3689 fetch_ht_irq_msg(irq, &msg);
3691 msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
3692 msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
3694 msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
3695 msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
3697 write_ht_irq_msg(irq, &msg);
3700 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
3702 struct irq_desc *desc = irq_to_desc(irq);
3703 struct irq_cfg *cfg;
3704 unsigned int dest;
3705 cpumask_t tmp;
3707 cpus_and(tmp, mask, cpu_online_map);
3708 if (cpus_empty(tmp))
3709 return;
3711 cfg = desc->chip_data;
3712 if (assign_irq_vector(irq, cfg, mask))
3713 return;
3715 set_extra_move_desc(desc, mask);
3717 cpus_and(tmp, cfg->domain, mask);
3718 dest = cpu_mask_to_apicid(tmp);
3720 target_ht_irq(irq, dest, cfg->vector);
3721 desc->affinity = mask;
3724 #endif
3726 static struct irq_chip ht_irq_chip = {
3727 .name = "PCI-HT",
3728 .mask = mask_ht_irq,
3729 .unmask = unmask_ht_irq,
3730 .ack = ack_apic_edge,
3731 #ifdef CONFIG_SMP
3732 .set_affinity = set_ht_irq_affinity,
3733 #endif
3734 .retrigger = ioapic_retrigger_irq,
3737 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
3739 struct irq_cfg *cfg;
3740 int err;
3741 cpumask_t tmp;
3743 cfg = irq_cfg(irq);
3744 tmp = TARGET_CPUS;
3745 err = assign_irq_vector(irq, cfg, tmp);
3746 if (!err) {
3747 struct ht_irq_msg msg;
3748 unsigned dest;
3750 cpus_and(tmp, cfg->domain, tmp);
3751 dest = cpu_mask_to_apicid(tmp);
3753 msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
3755 msg.address_lo =
3756 HT_IRQ_LOW_BASE |
3757 HT_IRQ_LOW_DEST_ID(dest) |
3758 HT_IRQ_LOW_VECTOR(cfg->vector) |
3759 ((INT_DEST_MODE == 0) ?
3760 HT_IRQ_LOW_DM_PHYSICAL :
3761 HT_IRQ_LOW_DM_LOGICAL) |
3762 HT_IRQ_LOW_RQEOI_EDGE |
3763 ((INT_DELIVERY_MODE != dest_LowestPrio) ?
3764 HT_IRQ_LOW_MT_FIXED :
3765 HT_IRQ_LOW_MT_ARBITRATED) |
3766 HT_IRQ_LOW_IRQ_MASKED;
3768 write_ht_irq_msg(irq, &msg);
3770 set_irq_chip_and_handler_name(irq, &ht_irq_chip,
3771 handle_edge_irq, "edge");
3773 dev_printk(KERN_DEBUG, &dev->dev, "irq %d for HT\n", irq);
3775 return err;
3777 #endif /* CONFIG_HT_IRQ */
3779 #ifdef CONFIG_X86_64
3781 * Re-target the irq to the specified CPU and enable the specified MMR located
3782 * on the specified blade to allow the sending of MSIs to the specified CPU.
3784 int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
3785 unsigned long mmr_offset)
3787 const cpumask_t *eligible_cpu = get_cpu_mask(cpu);
3788 struct irq_cfg *cfg;
3789 int mmr_pnode;
3790 unsigned long mmr_value;
3791 struct uv_IO_APIC_route_entry *entry;
3792 unsigned long flags;
3793 int err;
3795 cfg = irq_cfg(irq);
3797 err = assign_irq_vector(irq, cfg, *eligible_cpu);
3798 if (err != 0)
3799 return err;
3801 spin_lock_irqsave(&vector_lock, flags);
3802 set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
3803 irq_name);
3804 spin_unlock_irqrestore(&vector_lock, flags);
3806 mmr_value = 0;
3807 entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
3808 BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
3810 entry->vector = cfg->vector;
3811 entry->delivery_mode = INT_DELIVERY_MODE;
3812 entry->dest_mode = INT_DEST_MODE;
3813 entry->polarity = 0;
3814 entry->trigger = 0;
3815 entry->mask = 0;
3816 entry->dest = cpu_mask_to_apicid(*eligible_cpu);
3818 mmr_pnode = uv_blade_to_pnode(mmr_blade);
3819 uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
3821 return irq;
3825 * Disable the specified MMR located on the specified blade so that MSIs are
3826 * longer allowed to be sent.
3828 void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
3830 unsigned long mmr_value;
3831 struct uv_IO_APIC_route_entry *entry;
3832 int mmr_pnode;
3834 mmr_value = 0;
3835 entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
3836 BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
3838 entry->mask = 1;
3840 mmr_pnode = uv_blade_to_pnode(mmr_blade);
3841 uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
3843 #endif /* CONFIG_X86_64 */
3845 int __init io_apic_get_redir_entries (int ioapic)
3847 union IO_APIC_reg_01 reg_01;
3848 unsigned long flags;
3850 spin_lock_irqsave(&ioapic_lock, flags);
3851 reg_01.raw = io_apic_read(ioapic, 1);
3852 spin_unlock_irqrestore(&ioapic_lock, flags);
3854 return reg_01.bits.entries;
3857 void __init probe_nr_irqs_gsi(void)
3859 int idx;
3860 int nr = 0;
3862 for (idx = 0; idx < nr_ioapics; idx++)
3863 nr += io_apic_get_redir_entries(idx) + 1;
3865 if (nr > nr_irqs_gsi)
3866 nr_irqs_gsi = nr;
3869 /* --------------------------------------------------------------------------
3870 ACPI-based IOAPIC Configuration
3871 -------------------------------------------------------------------------- */
3873 #ifdef CONFIG_ACPI
3875 #ifdef CONFIG_X86_32
3876 int __init io_apic_get_unique_id(int ioapic, int apic_id)
3878 union IO_APIC_reg_00 reg_00;
3879 static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
3880 physid_mask_t tmp;
3881 unsigned long flags;
3882 int i = 0;
3885 * The P4 platform supports up to 256 APIC IDs on two separate APIC
3886 * buses (one for LAPICs, one for IOAPICs), where predecessors only
3887 * supports up to 16 on one shared APIC bus.
3889 * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full
3890 * advantage of new APIC bus architecture.
3893 if (physids_empty(apic_id_map))
3894 apic_id_map = ioapic_phys_id_map(phys_cpu_present_map);
3896 spin_lock_irqsave(&ioapic_lock, flags);
3897 reg_00.raw = io_apic_read(ioapic, 0);
3898 spin_unlock_irqrestore(&ioapic_lock, flags);
3900 if (apic_id >= get_physical_broadcast()) {
3901 printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
3902 "%d\n", ioapic, apic_id, reg_00.bits.ID);
3903 apic_id = reg_00.bits.ID;
3907 * Every APIC in a system must have a unique ID or we get lots of nice
3908 * 'stuck on smp_invalidate_needed IPI wait' messages.
3910 if (check_apicid_used(apic_id_map, apic_id)) {
3912 for (i = 0; i < get_physical_broadcast(); i++) {
3913 if (!check_apicid_used(apic_id_map, i))
3914 break;
3917 if (i == get_physical_broadcast())
3918 panic("Max apic_id exceeded!\n");
3920 printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
3921 "trying %d\n", ioapic, apic_id, i);
3923 apic_id = i;
3926 tmp = apicid_to_cpu_present(apic_id);
3927 physids_or(apic_id_map, apic_id_map, tmp);
3929 if (reg_00.bits.ID != apic_id) {
3930 reg_00.bits.ID = apic_id;
3932 spin_lock_irqsave(&ioapic_lock, flags);
3933 io_apic_write(ioapic, 0, reg_00.raw);
3934 reg_00.raw = io_apic_read(ioapic, 0);
3935 spin_unlock_irqrestore(&ioapic_lock, flags);
3937 /* Sanity check */
3938 if (reg_00.bits.ID != apic_id) {
3939 printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
3940 return -1;
3944 apic_printk(APIC_VERBOSE, KERN_INFO
3945 "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id);
3947 return apic_id;
3950 int __init io_apic_get_version(int ioapic)
3952 union IO_APIC_reg_01 reg_01;
3953 unsigned long flags;
3955 spin_lock_irqsave(&ioapic_lock, flags);
3956 reg_01.raw = io_apic_read(ioapic, 1);
3957 spin_unlock_irqrestore(&ioapic_lock, flags);
3959 return reg_01.bits.version;
3961 #endif
3963 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
3965 struct irq_desc *desc;
3966 struct irq_cfg *cfg;
3967 int cpu = boot_cpu_id;
3969 if (!IO_APIC_IRQ(irq)) {
3970 apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
3971 ioapic);
3972 return -EINVAL;
3975 desc = irq_to_desc_alloc_cpu(irq, cpu);
3976 if (!desc) {
3977 printk(KERN_INFO "can not get irq_desc %d\n", irq);
3978 return 0;
3982 * IRQs < 16 are already in the irq_2_pin[] map
3984 if (irq >= NR_IRQS_LEGACY) {
3985 cfg = desc->chip_data;
3986 add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
3989 setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
3991 return 0;
3995 int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
3997 int i;
3999 if (skip_ioapic_setup)
4000 return -1;
4002 for (i = 0; i < mp_irq_entries; i++)
4003 if (mp_irqs[i].mp_irqtype == mp_INT &&
4004 mp_irqs[i].mp_srcbusirq == bus_irq)
4005 break;
4006 if (i >= mp_irq_entries)
4007 return -1;
4009 *trigger = irq_trigger(i);
4010 *polarity = irq_polarity(i);
4011 return 0;
4014 #endif /* CONFIG_ACPI */
4017 * This function currently is only a helper for the i386 smp boot process where
4018 * we need to reprogram the ioredtbls to cater for the cpus which have come online
4019 * so mask in all cases should simply be TARGET_CPUS
4021 #ifdef CONFIG_SMP
4022 void __init setup_ioapic_dest(void)
4024 int pin, ioapic, irq, irq_entry;
4025 struct irq_desc *desc;
4026 struct irq_cfg *cfg;
4027 cpumask_t mask;
4029 if (skip_ioapic_setup == 1)
4030 return;
4032 for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
4033 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
4034 irq_entry = find_irq_entry(ioapic, pin, mp_INT);
4035 if (irq_entry == -1)
4036 continue;
4037 irq = pin_2_irq(irq_entry, ioapic, pin);
4039 /* setup_IO_APIC_irqs could fail to get vector for some device
4040 * when you have too many devices, because at that time only boot
4041 * cpu is online.
4043 desc = irq_to_desc(irq);
4044 cfg = desc->chip_data;
4045 if (!cfg->vector) {
4046 setup_IO_APIC_irq(ioapic, pin, irq, desc,
4047 irq_trigger(irq_entry),
4048 irq_polarity(irq_entry));
4049 continue;
4054 * Honour affinities which have been set in early boot
4056 if (desc->status &
4057 (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
4058 mask = desc->affinity;
4059 else
4060 mask = TARGET_CPUS;
4062 #ifdef CONFIG_INTR_REMAP
4063 if (intr_remapping_enabled)
4064 set_ir_ioapic_affinity_irq_desc(desc, mask);
4065 else
4066 #endif
4067 set_ioapic_affinity_irq_desc(desc, mask);
4072 #endif
4074 #define IOAPIC_RESOURCE_NAME_SIZE 11
4076 static struct resource *ioapic_resources;
4078 static struct resource * __init ioapic_setup_resources(void)
4080 unsigned long n;
4081 struct resource *res;
4082 char *mem;
4083 int i;
4085 if (nr_ioapics <= 0)
4086 return NULL;
4088 n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
4089 n *= nr_ioapics;
4091 mem = alloc_bootmem(n);
4092 res = (void *)mem;
4094 if (mem != NULL) {
4095 mem += sizeof(struct resource) * nr_ioapics;
4097 for (i = 0; i < nr_ioapics; i++) {
4098 res[i].name = mem;
4099 res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
4100 sprintf(mem, "IOAPIC %u", i);
4101 mem += IOAPIC_RESOURCE_NAME_SIZE;
4105 ioapic_resources = res;
4107 return res;
4110 void __init ioapic_init_mappings(void)
4112 unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
4113 struct resource *ioapic_res;
4114 int i;
4116 ioapic_res = ioapic_setup_resources();
4117 for (i = 0; i < nr_ioapics; i++) {
4118 if (smp_found_config) {
4119 ioapic_phys = mp_ioapics[i].mp_apicaddr;
4120 #ifdef CONFIG_X86_32
4121 if (!ioapic_phys) {
4122 printk(KERN_ERR
4123 "WARNING: bogus zero IO-APIC "
4124 "address found in MPTABLE, "
4125 "disabling IO/APIC support!\n");
4126 smp_found_config = 0;
4127 skip_ioapic_setup = 1;
4128 goto fake_ioapic_page;
4130 #endif
4131 } else {
4132 #ifdef CONFIG_X86_32
4133 fake_ioapic_page:
4134 #endif
4135 ioapic_phys = (unsigned long)
4136 alloc_bootmem_pages(PAGE_SIZE);
4137 ioapic_phys = __pa(ioapic_phys);
4139 set_fixmap_nocache(idx, ioapic_phys);
4140 apic_printk(APIC_VERBOSE,
4141 "mapped IOAPIC to %08lx (%08lx)\n",
4142 __fix_to_virt(idx), ioapic_phys);
4143 idx++;
4145 if (ioapic_res != NULL) {
4146 ioapic_res->start = ioapic_phys;
4147 ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
4148 ioapic_res++;
4153 static int __init ioapic_insert_resources(void)
4155 int i;
4156 struct resource *r = ioapic_resources;
4158 if (!r) {
4159 printk(KERN_ERR
4160 "IO APIC resources could be not be allocated.\n");
4161 return -1;
4164 for (i = 0; i < nr_ioapics; i++) {
4165 insert_resource(&iomem_resource, r);
4166 r++;
4169 return 0;
4172 /* Insert the IO APIC resources after PCI initialization has occured to handle
4173 * IO APICS that are mapped in on a BAR in PCI space. */
4174 late_initcall(ioapic_insert_resources);