Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/kernel-parameters.txt for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI] Atari SCSI
  31
  32         BusLogic=       [HW,SCSI]
  33                         See drivers/scsi/BusLogic.c, comment before function
  34                         BusLogic_ParseDriverOptions().
  35
  36         dtc3181e=       [HW,SCSI]
  37
  38         eata=           [HW,SCSI]
  39
  40         fdomain=        [HW,SCSI]
  41                         See header of drivers/scsi/fdomain.c.
  42
  43         gdth=           [HW,SCSI]
  44                         See header of drivers/scsi/gdth.c.
  45
  46         gvp11=          [HW,SCSI]
  47
  48         in2000=         [HW,SCSI]
  49                         See header of drivers/scsi/in2000.c.
  50
  51         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  52                         See header of drivers/scsi/ips.c.
  53
  54         mac5380=        [HW,SCSI] Format:
  55                         <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
  56
  57         max_luns=       [SCSI] Maximum number of LUNs to probe.
  58                         Should be between 1 and 2^32-1.
  59
  60         max_report_luns=
  61                         [SCSI] Maximum number of LUNs received.
  62                         Should be between 1 and 16384.
  63
  64         NCR_D700=       [HW,SCSI]
  65                         See header of drivers/scsi/NCR_D700.c.
  66
  67         ncr5380=        [HW,SCSI]
  68
  69         ncr53c400=      [HW,SCSI]
  70
  71         ncr53c400a=     [HW,SCSI]
  72
  73         ncr53c406a=     [HW,SCSI]
  74
  75         ncr53c8xx=      [HW,SCSI]
  76
  77         nodisconnect    [HW,SCSI,M68K] Disables SCSI disconnects.
  78
  79         osst=           [HW,SCSI] SCSI Tape Driver
  80                         Format: <buffer_size>,<write_threshold>
  81                         See also Documentation/scsi/st.txt.
  82
  83         pas16=          [HW,SCSI]
  84                         See header of drivers/scsi/pas16.c.
  85
  86         scsi_debug_*=   [SCSI]
  87                         See drivers/scsi/scsi_debug.c.
  88
  89         scsi_default_dev_flags=
  90                         [SCSI] SCSI default device flags
  91                         Format: <integer>
  92
  93         scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
  94                         Format: <vendor>:<model>:<flags>
  95                         (flags are integer value)
  96
  97         scsi_logging_level=     [SCSI] a bit mask of logging levels
  98                         See drivers/scsi/scsi_logging.h for bits.  Also
  99                         settable via sysctl at dev.scsi.logging_level
 100                         (/proc/sys/dev/scsi/logging_level).
 101                         There is also a nice 'scsi_logging_level' script in the
 102                         S390-tools package, available for download at
 103                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
 104
 105         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 106                         discovered.  async scans them in kernel threads,
 107                         allowing boot to proceed.  none ignores them, expecting
 108                         user space to do the scan.
 109
 110         sim710=         [SCSI,HW]
 111                         See header of drivers/scsi/sim710.c.
 112
 113         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 114                         See Documentation/scsi/st.txt.
 115
 116         sym53c416=      [HW,SCSI]
 117                         See header of drivers/scsi/sym53c416.c.
 118
 119         t128=           [HW,SCSI]
 120                         See header of drivers/scsi/t128.c.
 121
 122         tmscsim=        [HW,SCSI]
 123                         See comment before function dc390_setup() in
 124                         drivers/scsi/tmscsim.c.
 125
 126         u14-34f=        [HW,SCSI] UltraStor 14F/34F SCSI host adapter
 127                         See header of drivers/scsi/u14-34f.c.
 128
 129         wd33c93=        [HW,SCSI]
 130                         See header of drivers/scsi/wd33c93.c.
 131
 132         wd7000=         [HW,SCSI]
 133                         See header of drivers/scsi/wd7000.c.