drivers/ide/via82cxxx.c

   1 /*
   2  * VIA IDE driver for Linux. Supported southbridges:
   3  *
   4  *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
   5  *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
   6  *   vt8235, vt8237, vt8237a
   7  *
   8  * Copyright (c) 2000-2002 Vojtech Pavlik
   9  * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
  10  *
  11  * Based on the work of:
  12  *      Michel Aubry
  13  *      Jeff Garzik
  14  *      Andre Hedrick
  15  *
  16  * Documentation:
  17  *      Obsolete device documentation publically available from via.com.tw
  18  *      Current device documentation available under NDA only
  19  */
  20
  21 /*
  22  * This program is free software; you can redistribute it and/or modify it
  23  * under the terms of the GNU General Public License version 2 as published by
  24  * the Free Software Foundation.
  25  */
  26
  27 #include <linux/module.h>
  28 #include <linux/kernel.h>
  29 #include <linux/pci.h>
  30 #include <linux/init.h>
  31 #include <linux/ide.h>
  32 #include <linux/dmi.h>
  33
  34 #ifdef CONFIG_PPC_CHRP
  35 #include <asm/processor.h>
  36 #endif
  37
  38 #define DRV_NAME "via82cxxx"
  39
  40 #define VIA_IDE_ENABLE          0x40
  41 #define VIA_IDE_CONFIG          0x41
  42 #define VIA_FIFO_CONFIG         0x43
  43 #define VIA_MISC_1              0x44
  44 #define VIA_MISC_2              0x45
  45 #define VIA_MISC_3              0x46
  46 #define VIA_DRIVE_TIMING        0x48
  47 #define VIA_8BIT_TIMING         0x4e
  48 #define VIA_ADDRESS_SETUP       0x4c
  49 #define VIA_UDMA_TIMING         0x50
  50
  51 #define VIA_BAD_PREQ            0x01 /* Crashes if PREQ# till DDACK# set */
  52 #define VIA_BAD_CLK66           0x02 /* 66 MHz clock doesn't work correctly */
  53 #define VIA_SET_FIFO            0x04 /* Needs to have FIFO split set */
  54 #define VIA_NO_UNMASK           0x08 /* Doesn't work with IRQ unmasking on */
  55 #define VIA_BAD_ID              0x10 /* Has wrong vendor ID (0x1107) */
  56 #define VIA_BAD_AST             0x20 /* Don't touch Address Setup Timing */
  57
  58 /*
  59  * VIA SouthBridge chips.
  60  */
  61
  62 static struct via_isa_bridge {
  63         char *name;
  64         u16 id;
  65         u8 rev_min;
  66         u8 rev_max;
  67         u8 udma_mask;
  68         u8 flags;
  69 } via_isa_bridges[] = {
  70         { "vx855",      PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  71         { "vx800",      PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  72         { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  73         { "vt8237s",    PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  74         { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  75         { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  76         { "vt8237",     PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  77         { "vt8237a",    PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  78         { "vt8235",     PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  79         { "vt8233a",    PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  80         { "vt8233c",    PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, ATA_UDMA5, },
  81         { "vt8233",     PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, ATA_UDMA5, },
  82         { "vt8231",     PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, ATA_UDMA5, },
  83         { "vt82c686b",  PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, ATA_UDMA5, },
  84         { "vt82c686a",  PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, ATA_UDMA4, },
  85         { "vt82c686",   PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
  86         { "vt82c596b",  PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, ATA_UDMA4, },
  87         { "vt82c596a",  PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
  88         { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
  89         { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
  90         { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
  91         { "vt82c586a",  PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
  92         { "vt82c586",   PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
  93         { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
  94         { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
  95         { NULL }
  96 };
  97
  98 static unsigned int via_clock;
  99 static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
 100
 101 struct via82cxxx_dev
 102 {
 103         struct via_isa_bridge *via_config;
 104         unsigned int via_80w;
 105 };
 106
 107 /**
 108  *      via_set_speed                   -       write timing registers
 109  *      @dev: PCI device
 110  *      @dn: device
 111  *      @timing: IDE timing data to use
 112  *
 113  *      via_set_speed writes timing values to the chipset registers
 114  */
 115
 116 static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 117 {
 118         struct pci_dev *dev = to_pci_dev(hwif->dev);
 119         struct ide_host *host = pci_get_drvdata(dev);
 120         struct via82cxxx_dev *vdev = host->host_priv;
 121         u8 t;
 122
 123         if (~vdev->via_config->flags & VIA_BAD_AST) {
 124                 pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
 125                 t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
 126                 pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
 127         }
 128
 129         pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
 130                 ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
 131
 132         pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
 133                 ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
 134
 135         switch (vdev->via_config->udma_mask) {
 136         case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
 137         case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
 138         case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
 139         case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
 140         default: return;
 141         }
 142
 143         pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
 144 }
 145
 146 /**
 147  *      via_set_drive           -       configure transfer mode
 148  *      @drive: Drive to set up
 149  *      @speed: desired speed
 150  *
 151  *      via_set_drive() computes timing values configures the chipset to
 152  *      a desired transfer mode.  It also can be called by upper layers.
 153  */
 154
 155 static void via_set_drive(ide_drive_t *drive, const u8 speed)
 156 {
 157         ide_hwif_t *hwif = drive->hwif;
 158         ide_drive_t *peer = ide_get_pair_dev(drive);
 159         struct pci_dev *dev = to_pci_dev(hwif->dev);
 160         struct ide_host *host = pci_get_drvdata(dev);
 161         struct via82cxxx_dev *vdev = host->host_priv;
 162         struct ide_timing t, p;
 163         unsigned int T, UT;
 164
 165         T = 1000000000 / via_clock;
 166
 167         switch (vdev->via_config->udma_mask) {
 168         case ATA_UDMA2: UT = T;   break;
 169         case ATA_UDMA4: UT = T/2; break;
 170         case ATA_UDMA5: UT = T/3; break;
 171         case ATA_UDMA6: UT = T/4; break;
 172         default:        UT = T;
 173         }
 174
 175         ide_timing_compute(drive, speed, &t, T, UT);
 176
 177         if (peer) {
 178                 ide_timing_compute(peer, peer->current_speed, &p, T, UT);
 179                 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 180         }
 181
 182         via_set_speed(hwif, drive->dn, &t);
 183 }
 184
 185 /**
 186  *      via_set_pio_mode        -       set host controller for PIO mode
 187  *      @drive: drive
 188  *      @pio: PIO mode number
 189  *
 190  *      A callback from the upper layers for PIO-only tuning.
 191  */
 192
 193 static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
 194 {
 195         via_set_drive(drive, XFER_PIO_0 + pio);
 196 }
 197
 198 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
 199 {
 200         struct via_isa_bridge *via_config;
 201
 202         for (via_config = via_isa_bridges; via_config->id; via_config++)
 203                 if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
 204                         !!(via_config->flags & VIA_BAD_ID),
 205                         via_config->id, NULL))) {
 206
 207                         if ((*isa)->revision >= via_config->rev_min &&
 208                             (*isa)->revision <= via_config->rev_max)
 209                                 break;
 210                         pci_dev_put(*isa);
 211                 }
 212
 213         return via_config;
 214 }
 215
 216 /*
 217  * Check and handle 80-wire cable presence
 218  */
 219 static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 220 {
 221         int i;
 222
 223         switch (vdev->via_config->udma_mask) {
 224                 case ATA_UDMA4:
 225                         for (i = 24; i >= 0; i -= 8)
 226                                 if (((u >> (i & 16)) & 8) &&
 227                                     ((u >> i) & 0x20) &&
 228                                      (((u >> i) & 7) < 2)) {
 229                                         /*
 230                                          * 2x PCI clock and
 231                                          * UDMA w/ < 3T/cycle
 232                                          */
 233                                         vdev->via_80w |= (1 << (1 - (i >> 4)));
 234                                 }
 235                         break;
 236
 237                 case ATA_UDMA5:
 238                         for (i = 24; i >= 0; i -= 8)
 239                                 if (((u >> i) & 0x10) ||
 240                                     (((u >> i) & 0x20) &&
 241                                      (((u >> i) & 7) < 4))) {
 242                                         /* BIOS 80-wire bit or
 243                                          * UDMA w/ < 60ns/cycle
 244                                          */
 245                                         vdev->via_80w |= (1 << (1 - (i >> 4)));
 246                                 }
 247                         break;
 248
 249                 case ATA_UDMA6:
 250                         for (i = 24; i >= 0; i -= 8)
 251                                 if (((u >> i) & 0x10) ||
 252                                     (((u >> i) & 0x20) &&
 253                                      (((u >> i) & 7) < 6))) {
 254                                         /* BIOS 80-wire bit or
 255                                          * UDMA w/ < 60ns/cycle
 256                                          */
 257                                         vdev->via_80w |= (1 << (1 - (i >> 4)));
 258                                 }
 259                         break;
 260         }
 261 }
 262
 263 /**
 264  *      init_chipset_via82cxxx  -       initialization handler
 265  *      @dev: PCI device
 266  *
 267  *      The initialization callback. Here we determine the IDE chip type
 268  *      and initialize its drive independent registers.
 269  */
 270
 271 static int init_chipset_via82cxxx(struct pci_dev *dev)
 272 {
 273         struct ide_host *host = pci_get_drvdata(dev);
 274         struct via82cxxx_dev *vdev = host->host_priv;
 275         struct via_isa_bridge *via_config = vdev->via_config;
 276         u8 t, v;
 277         u32 u;
 278
 279         /*
 280          * Detect cable and configure Clk66
 281          */
 282         pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
 283
 284         via_cable_detect(vdev, u);
 285
 286         if (via_config->udma_mask == ATA_UDMA4) {
 287                 /* Enable Clk66 */
 288                 pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
 289         } else if (via_config->flags & VIA_BAD_CLK66) {
 290                 /* Would cause trouble on 596a and 686 */
 291                 pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
 292         }
 293
 294         /*
 295          * Check whether interfaces are enabled.
 296          */
 297
 298         pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
 299
 300         /*
 301          * Set up FIFO sizes and thresholds.
 302          */
 303
 304         pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
 305
 306         /* Disable PREQ# till DDACK# */
 307         if (via_config->flags & VIA_BAD_PREQ) {
 308                 /* Would crash on 586b rev 41 */
 309                 t &= 0x7f;
 310         }
 311
 312         /* Fix FIFO split between channels */
 313         if (via_config->flags & VIA_SET_FIFO) {
 314                 t &= (t & 0x9f);
 315                 switch (v & 3) {
 316                         case 2: t |= 0x00; break;       /* 16 on primary */
 317                         case 1: t |= 0x60; break;       /* 16 on secondary */
 318                         case 3: t |= 0x20; break;       /* 8 pri 8 sec */
 319                 }
 320         }
 321
 322         pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
 323
 324         return 0;
 325 }
 326
 327 /*
 328  *      Cable special cases
 329  */
 330
 331 static const struct dmi_system_id cable_dmi_table[] = {
 332         {
 333                 .ident = "Acer Ferrari 3400",
 334                 .matches = {
 335                         DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
 336                         DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
 337                 },
 338         },
 339         { }
 340 };
 341
 342 static int via_cable_override(struct pci_dev *pdev)
 343 {
 344         /* Systems by DMI */
 345         if (dmi_check_system(cable_dmi_table))
 346                 return 1;
 347
 348         /* Arima W730-K8/Targa Visionary 811/... */
 349         if (pdev->subsystem_vendor == 0x161F &&
 350             pdev->subsystem_device == 0x2032)
 351                 return 1;
 352
 353         return 0;
 354 }
 355
 356 static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
 357 {
 358         struct pci_dev *pdev = to_pci_dev(hwif->dev);
 359         struct ide_host *host = pci_get_drvdata(pdev);
 360         struct via82cxxx_dev *vdev = host->host_priv;
 361
 362         if (via_cable_override(pdev))
 363                 return ATA_CBL_PATA40_SHORT;
 364
 365         if ((vdev->via_80w >> hwif->channel) & 1)
 366                 return ATA_CBL_PATA80;
 367         else
 368                 return ATA_CBL_PATA40;
 369 }
 370
 371 static const struct ide_port_ops via_port_ops = {
 372         .set_pio_mode           = via_set_pio_mode,
 373         .set_dma_mode           = via_set_drive,
 374         .cable_detect           = via82cxxx_cable_detect,
 375 };
 376
 377 static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 378         .name           = DRV_NAME,
 379         .init_chipset   = init_chipset_via82cxxx,
 380         .enablebits     = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
 381         .port_ops       = &via_port_ops,
 382         .host_flags     = IDE_HFLAG_PIO_NO_BLACKLIST |
 383                           IDE_HFLAG_POST_SET_MODE |
 384                           IDE_HFLAG_IO_32BIT,
 385         .pio_mask       = ATA_PIO5,
 386         .swdma_mask     = ATA_SWDMA2,
 387         .mwdma_mask     = ATA_MWDMA2,
 388 };
 389
 390 static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 391 {
 392         struct pci_dev *isa = NULL;
 393         struct via_isa_bridge *via_config;
 394         struct via82cxxx_dev *vdev;
 395         int rc;
 396         u8 idx = id->driver_data;
 397         struct ide_port_info d;
 398
 399         d = via82cxxx_chipset;
 400
 401         /*
 402          * Find the ISA bridge and check we know what it is.
 403          */
 404         via_config = via_config_find(&isa);
 405         if (!via_config->id) {
 406                 printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
 407                         pci_name(dev));
 408                 return -ENODEV;
 409         }
 410
 411         /*
 412          * Print the boot message.
 413          */
 414         printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
 415                 pci_name(dev), via_config->name, isa->revision,
 416                 via_config->udma_mask ? "U" : "MW",
 417                 via_dma[via_config->udma_mask ?
 418                         (fls(via_config->udma_mask) - 1) : 0]);
 419
 420         pci_dev_put(isa);
 421
 422         /*
 423          * Determine system bus clock.
 424          */
 425         via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
 426
 427         switch (via_clock) {
 428         case 33000: via_clock = 33333; break;
 429         case 37000: via_clock = 37500; break;
 430         case 41000: via_clock = 41666; break;
 431         }
 432
 433         if (via_clock < 20000 || via_clock > 50000) {
 434                 printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
 435                         "impossible (%d), using 33 MHz instead.\n", via_clock);
 436                 via_clock = 33333;
 437         }
 438
 439         if (idx == 0)
 440                 d.host_flags |= IDE_HFLAG_NO_AUTODMA;
 441         else
 442                 d.enablebits[1].reg = d.enablebits[0].reg = 0;
 443
 444         if ((via_config->flags & VIA_NO_UNMASK) == 0)
 445                 d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
 446
 447         d.udma_mask = via_config->udma_mask;
 448
 449         vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 450         if (!vdev) {
 451                 printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
 452                         pci_name(dev));
 453                 return -ENOMEM;
 454         }
 455
 456         vdev->via_config = via_config;
 457
 458         rc = ide_pci_init_one(dev, &d, vdev);
 459         if (rc)
 460                 kfree(vdev);
 461
 462         return rc;
 463 }
 464
 465 static void __devexit via_remove(struct pci_dev *dev)
 466 {
 467         struct ide_host *host = pci_get_drvdata(dev);
 468         struct via82cxxx_dev *vdev = host->host_priv;
 469
 470         ide_pci_remove(dev);
 471         kfree(vdev);
 472 }
 473
 474 static const struct pci_device_id via_pci_tbl[] = {
 475         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
 476         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
 477         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
 478         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
 479         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
 480         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
 481         { 0, },
 482 };
 483 MODULE_DEVICE_TABLE(pci, via_pci_tbl);
 484
 485 static struct pci_driver via_pci_driver = {
 486         .name           = "VIA_IDE",
 487         .id_table       = via_pci_tbl,
 488         .probe          = via_init_one,
 489         .remove         = __devexit_p(via_remove),
 490         .suspend        = ide_pci_suspend,
 491         .resume         = ide_pci_resume,
 492 };
 493
 494 static int __init via_ide_init(void)
 495 {
 496         return ide_pci_register_driver(&via_pci_driver);
 497 }
 498
 499 static void __exit via_ide_exit(void)
 500 {
 501         pci_unregister_driver(&via_pci_driver);
 502 }
 503
 504 module_init(via_ide_init);
 505 module_exit(via_ide_exit);
 506
 507 MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
 508 MODULE_DESCRIPTION("PCI driver module for VIA IDE");
 509 MODULE_LICENSE("GPL");