1 /*******************************************************************************
3 Header file for stmmac platform data
5 Copyright (C) 2009 STMicroelectronics Ltd
7 This program is free software; you can redistribute it and/or modify it
8 under the terms and conditions of the GNU General Public License,
9 version 2, as published by the Free Software Foundation.
11 This program is distributed in the hope it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 You should have received a copy of the GNU General Public License along with
17 this program; if not, write to the Free Software Foundation, Inc.,
18 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
20 The full GNU General Public License is included in this distribution in
21 the file called "COPYING".
23 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
24 *******************************************************************************/
26 #ifndef __STMMAC_PLATFORM_DATA
27 #define __STMMAC_PLATFORM_DATA
29 #include <linux/platform_device.h>
31 #define STMMAC_RX_COE_NONE 0
32 #define STMMAC_RX_COE_TYPE1 1
33 #define STMMAC_RX_COE_TYPE2 2
35 /* Define the macros for CSR clock range parameters to be passed by
37 * This could also be configured at run time using CPU freq framework. */
39 /* MDC Clock Selection define*/
40 #define STMMAC_CSR_60_100M 0x0 /* MDC = clk_scr_i/42 */
41 #define STMMAC_CSR_100_150M 0x1 /* MDC = clk_scr_i/62 */
42 #define STMMAC_CSR_20_35M 0x2 /* MDC = clk_scr_i/16 */
43 #define STMMAC_CSR_35_60M 0x3 /* MDC = clk_scr_i/26 */
44 #define STMMAC_CSR_150_250M 0x4 /* MDC = clk_scr_i/102 */
45 #define STMMAC_CSR_250_300M 0x5 /* MDC = clk_scr_i/122 */
47 /* The MDC clock could be set higher than the IEEE 802.3
48 * specified frequency limit 0f 2.5 MHz, by programming a clock divider
49 * of value different than the above defined values. The resultant MDIO
50 * clock frequency of 12.5 MHz is applicable for the interfacing chips
51 * supporting higher MDC clocks.
52 * The MDC clock selection macros need to be defined for MDC clock rate
53 * of 12.5 MHz, corresponding to the following selection.
55 #define STMMAC_CSR_I_4 0x8 /* clk_csr_i/4 */
56 #define STMMAC_CSR_I_6 0x9 /* clk_csr_i/6 */
57 #define STMMAC_CSR_I_8 0xA /* clk_csr_i/8 */
58 #define STMMAC_CSR_I_10 0xB /* clk_csr_i/10 */
59 #define STMMAC_CSR_I_12 0xC /* clk_csr_i/12 */
60 #define STMMAC_CSR_I_14 0xD /* clk_csr_i/14 */
61 #define STMMAC_CSR_I_16 0xE /* clk_csr_i/16 */
62 #define STMMAC_CSR_I_18 0xF /* clk_csr_i/18 */
64 /* AXI DMA Burst length supported */
65 #define DMA_AXI_BLEN_4 (1 << 1)
66 #define DMA_AXI_BLEN_8 (1 << 2)
67 #define DMA_AXI_BLEN_16 (1 << 3)
68 #define DMA_AXI_BLEN_32 (1 << 4)
69 #define DMA_AXI_BLEN_64 (1 << 5)
70 #define DMA_AXI_BLEN_128 (1 << 6)
71 #define DMA_AXI_BLEN_256 (1 << 7)
72 #define DMA_AXI_BLEN_ALL (DMA_AXI_BLEN_4 | DMA_AXI_BLEN_8 | DMA_AXI_BLEN_16 \
73 | DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
74 | DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
76 /* Platfrom data for platform device structure's platform_data field */
78 struct stmmac_mdio_bus_data
{
79 int (*phy_reset
)(void *priv
);
80 unsigned int phy_mask
;
85 struct stmmac_dma_cfg
{
92 struct plat_stmmacenet_data
{
97 struct stmmac_mdio_bus_data
*mdio_bus_data
;
98 struct stmmac_dma_cfg
*dma_cfg
;
106 int force_sf_dma_mode
;
108 void (*fix_mac_speed
)(void *priv
, unsigned int speed
);
109 void (*bus_setup
)(void __iomem
*ioaddr
);
110 int (*init
)(struct platform_device
*pdev
);
111 void (*exit
)(struct platform_device
*pdev
);