| blob | f33aa08dd9b37d6a7b8e1414ec99022ada1673a1 |
1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
3 /*
4 * 802.11 netlink interface public header
5 *
6 * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
9 * Copyright 2008 Michael Buesch <mb@bu3sch.de>
10 * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
12 * Copyright 2008 Colin McCabe <colin@cozybit.com>
13 *
14 * Permission to use, copy, modify, and/or distribute this software for any
15 * purpose with or without fee is hereby granted, provided that the above
16 * copyright notice and this permission notice appear in all copies.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
25 *
26 */
28 /**
29 * DOC: Station handling
30 *
31 * Stations are added per interface, but a special case exists with VLAN
32 * interfaces. When a station is bound to an AP interface, it may be moved
33 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
34 * The station is still assumed to belong to the AP interface it was added
35 * to.
36 *
37 * TODO: need more info?
38 */
40 /**
41 * enum nl80211_commands - supported nl80211 commands
42 *
43 * @NL80211_CMD_UNSPEC: unspecified command to catch errors
44 *
45 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
46 * to get a list of all present wiphys.
47 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
48 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
49 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
50 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
51 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
52 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
53 * %NL80211_ATTR_WIPHY_NAME.
54 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
55 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
56 *
57 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
58 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
59 * on an %NL80211_ATTR_IFINDEX is supported.
60 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
61 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
62 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
63 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
64 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
65 * be sent from userspace to request creation of a new virtual interface,
66 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
67 * %NL80211_ATTR_IFNAME.
68 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
69 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
70 * userspace to request deletion of a virtual interface, then requires
71 * attribute %NL80211_ATTR_IFINDEX.
72 *
73 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
74 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
75 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
76 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
77 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
78 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
79 * attributes.
80 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
81 * or %NL80211_ATTR_MAC.
82 *
83 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
84 * %NL80222_CMD_NEW_BEACON message)
85 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
86 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
87 * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
88 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
89 * parameters are like for %NL80211_CMD_SET_BEACON.
90 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
91 *
92 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
93 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
94 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
95 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
96 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
97 * the interface identified by %NL80211_ATTR_IFINDEX.
98 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
99 * or, if no MAC address given, all stations, on the interface identified
100 * by %NL80211_ATTR_IFINDEX.
101 *
102 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
103 * destination %NL80211_ATTR_MAC on the interface identified by
104 * %NL80211_ATTR_IFINDEX.
105 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
106 * destination %NL80211_ATTR_MAC on the interface identified by
107 * %NL80211_ATTR_IFINDEX.
108 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
109 * the interface identified by %NL80211_ATTR_IFINDEX.
110 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
111 * or, if no MAC address given, all mesh paths, on the interface identified
112 * by %NL80211_ATTR_IFINDEX.
113 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
114 * %NL80211_ATTR_IFINDEX.
115 *
116 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
117 * regulatory domain.
118 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
119 * after being queried by the kernel. CRDA replies by sending a regulatory
120 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
121 * current alpha2 if it found a match. It also provides
122 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
123 * regulatory rule is a nested set of attributes given by
124 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
125 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
126 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
127 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
128 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
129 * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
130 * store this as a valid request and then query userspace for it.
131 *
132 * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
133 * interface identified by %NL80211_ATTR_IFINDEX
134 *
135 * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
136 * interface identified by %NL80211_ATTR_IFINDEX
137 *
138 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
139 * interface is identified with %NL80211_ATTR_IFINDEX and the management
140 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
141 * added to the end of the specified management frame is specified with
142 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
143 * added to all specified management frames generated by
144 * kernel/firmware/driver.
145 *
146 * @NL80211_CMD_GET_SCAN: get scan results
147 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
148 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
149 * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
150 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
151 * partial scan results may be available
152 *
153 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
154 * has been changed and provides details of the request information
155 * that caused the change such as who initiated the regulatory request
156 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
157 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
158 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
159 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
160 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
161 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
162 * to (%NL80211_ATTR_REG_ALPHA2).
163 *
164 * @NL80211_CMD_MAX: highest used command number
165 * @__NL80211_CMD_AFTER_LAST: internal use
166 */
168 /* don't change the order or add anything inbetween, this is ABI! */
169 NL80211_CMD_UNSPEC,
172 NL80211_CMD_SET_WIPHY,
173 NL80211_CMD_NEW_WIPHY,
174 NL80211_CMD_DEL_WIPHY,
177 NL80211_CMD_SET_INTERFACE,
178 NL80211_CMD_NEW_INTERFACE,
179 NL80211_CMD_DEL_INTERFACE,
181 NL80211_CMD_GET_KEY,
182 NL80211_CMD_SET_KEY,
183 NL80211_CMD_NEW_KEY,
184 NL80211_CMD_DEL_KEY,
186 NL80211_CMD_GET_BEACON,
187 NL80211_CMD_SET_BEACON,
188 NL80211_CMD_NEW_BEACON,
189 NL80211_CMD_DEL_BEACON,
191 NL80211_CMD_GET_STATION,
192 NL80211_CMD_SET_STATION,
193 NL80211_CMD_NEW_STATION,
194 NL80211_CMD_DEL_STATION,
196 NL80211_CMD_GET_MPATH,
197 NL80211_CMD_SET_MPATH,
198 NL80211_CMD_NEW_MPATH,
199 NL80211_CMD_DEL_MPATH,
201 NL80211_CMD_SET_BSS,
203 NL80211_CMD_SET_REG,
204 NL80211_CMD_REQ_SET_REG,
206 NL80211_CMD_GET_MESH_PARAMS,
207 NL80211_CMD_SET_MESH_PARAMS,
209 NL80211_CMD_SET_MGMT_EXTRA_IE,
211 NL80211_CMD_GET_REG,
213 NL80211_CMD_GET_SCAN,
214 NL80211_CMD_TRIGGER_SCAN,
215 NL80211_CMD_NEW_SCAN_RESULTS,
216 NL80211_CMD_SCAN_ABORTED,
218 NL80211_CMD_REG_CHANGE,
220 /* add new commands above here */
222 /* used to define NL80211_CMD_MAX below */
223 __NL80211_CMD_AFTER_LAST,
225 };
227 /*
228 * Allow user space programs to use #ifdef on new commands by defining them
229 * here
230 */
231 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
232 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
234 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
236 /**
237 * enum nl80211_attrs - nl80211 netlink attributes
238 *
239 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
240 *
241 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
242 * /sys/class/ieee80211/<phyname>/index
243 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
244 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
245 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
246 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
247 * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
248 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
249 * this attribute)
250 * NL80211_CHAN_HT20 = HT20 only
251 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
252 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
253 *
254 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
255 * @NL80211_ATTR_IFNAME: network interface name
256 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
257 *
258 * @NL80211_ATTR_MAC: MAC address (various uses)
259 *
260 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
261 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
262 * keys
263 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
264 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
265 * section 7.3.2.25.1, e.g. 0x000FAC04)
266 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
267 * CCMP keys, each six bytes in little endian
268 *
269 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
270 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
271 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
272 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
273 *
274 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
275 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
276 * &enum nl80211_sta_flags.
277 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
278 * IEEE 802.11 7.3.1.6 (u16).
279 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
280 * rates as defined by IEEE 802.11 7.3.2.2 but without the length
281 * restriction (at most %NL80211_MAX_SUPP_RATES).
282 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
283 * to, or the AP interface the station was originally added to to.
284 * @NL80211_ATTR_STA_INFO: information about a station, part of station info
285 * given for %NL80211_CMD_GET_STATION, nested attribute containing
286 * info as possible, see &enum nl80211_sta_info.
287 *
288 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
289 * consisting of a nested array.
290 *
291 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
292 * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
293 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
294 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
295 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
296 * &enum nl80211_mpath_info.
297 *
298 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
299 * &enum nl80211_mntr_flags.
300 *
301 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
302 * current regulatory domain should be set to or is already set to.
303 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
304 * to query the CRDA to retrieve one regulatory domain. This attribute can
305 * also be used by userspace to query the kernel for the currently set
306 * regulatory domain. We chose an alpha2 as that is also used by the
307 * IEEE-802.11d country information element to identify a country.
308 * Users can also simply ask the wireless core to set regulatory domain
309 * to a specific alpha2.
310 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
311 * rules.
312 *
313 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
314 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
315 * (u8, 0 or 1)
316 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
317 * (u8, 0 or 1)
318 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
319 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
320 * restriction (at most %NL80211_MAX_SUPP_RATES).
321 *
322 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
323 * association request when used with NL80211_CMD_NEW_STATION)
324 *
325 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
326 * supported interface types, each a flag attribute with the number
327 * of the interface mode.
328 *
329 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
330 * %NL80211_CMD_SET_MGMT_EXTRA_IE.
331 *
332 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
333 * %NL80211_CMD_SET_MGMT_EXTRA_IE).
334 *
335 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
336 * a single scan request, a wiphy attribute.
337 *
338 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
339 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
340 * scanning and include a zero-length SSID (wildcard) for wildcard scan
341 * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
342 * scan result list changes (BSS expired or added) so that applications
343 * can verify that they got a single, consistent snapshot (when all dump
344 * messages carried the same generation number)
345 * @NL80211_ATTR_BSS: scan result BSS
346 *
347 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
348 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
349 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
350 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
351 *
352 * @NL80211_ATTR_MAX: highest attribute number currently defined
353 * @__NL80211_ATTR_AFTER_LAST: internal use
354 */
356 /* don't change the order or add anything inbetween, this is ABI! */
357 NL80211_ATTR_UNSPEC,
359 NL80211_ATTR_WIPHY,
360 NL80211_ATTR_WIPHY_NAME,
362 NL80211_ATTR_IFINDEX,
363 NL80211_ATTR_IFNAME,
364 NL80211_ATTR_IFTYPE,
366 NL80211_ATTR_MAC,
368 NL80211_ATTR_KEY_DATA,
369 NL80211_ATTR_KEY_IDX,
370 NL80211_ATTR_KEY_CIPHER,
371 NL80211_ATTR_KEY_SEQ,
372 NL80211_ATTR_KEY_DEFAULT,
374 NL80211_ATTR_BEACON_INTERVAL,
375 NL80211_ATTR_DTIM_PERIOD,
376 NL80211_ATTR_BEACON_HEAD,
377 NL80211_ATTR_BEACON_TAIL,
379 NL80211_ATTR_STA_AID,
380 NL80211_ATTR_STA_FLAGS,
381 NL80211_ATTR_STA_LISTEN_INTERVAL,
382 NL80211_ATTR_STA_SUPPORTED_RATES,
383 NL80211_ATTR_STA_VLAN,
384 NL80211_ATTR_STA_INFO,
386 NL80211_ATTR_WIPHY_BANDS,
388 NL80211_ATTR_MNTR_FLAGS,
390 NL80211_ATTR_MESH_ID,
391 NL80211_ATTR_STA_PLINK_ACTION,
392 NL80211_ATTR_MPATH_NEXT_HOP,
393 NL80211_ATTR_MPATH_INFO,
395 NL80211_ATTR_BSS_CTS_PROT,
396 NL80211_ATTR_BSS_SHORT_PREAMBLE,
397 NL80211_ATTR_BSS_SHORT_SLOT_TIME,
399 NL80211_ATTR_HT_CAPABILITY,
401 NL80211_ATTR_SUPPORTED_IFTYPES,
403 NL80211_ATTR_REG_ALPHA2,
404 NL80211_ATTR_REG_RULES,
406 NL80211_ATTR_MESH_PARAMS,
408 NL80211_ATTR_BSS_BASIC_RATES,
410 NL80211_ATTR_WIPHY_TXQ_PARAMS,
411 NL80211_ATTR_WIPHY_FREQ,
412 NL80211_ATTR_WIPHY_CHANNEL_TYPE,
414 NL80211_ATTR_KEY_DEFAULT_MGMT,
416 NL80211_ATTR_MGMT_SUBTYPE,
417 NL80211_ATTR_IE,
419 NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
421 NL80211_ATTR_SCAN_FREQUENCIES,
422 NL80211_ATTR_SCAN_SSIDS,
423 NL80211_ATTR_SCAN_GENERATION,
424 NL80211_ATTR_BSS,
426 NL80211_ATTR_REG_INITIATOR,
427 NL80211_ATTR_REG_TYPE,
429 /* add attributes here, update the policy in nl80211.c */
431 __NL80211_ATTR_AFTER_LAST,
433 };
435 /*
436 * Allow user space programs to use #ifdef on new attributes by defining them
437 * here
438 */
439 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
440 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
441 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
442 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
443 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
444 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
445 #define NL80211_ATTR_IE NL80211_ATTR_IE
446 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
447 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
449 #define NL80211_MAX_SUPP_RATES 32
450 #define NL80211_MAX_SUPP_REG_RULES 32
451 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
452 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
453 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
454 #define NL80211_HT_CAPABILITY_LEN 26
456 /**
457 * enum nl80211_iftype - (virtual) interface types
458 *
459 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
460 * @NL80211_IFTYPE_ADHOC: independent BSS member
461 * @NL80211_IFTYPE_STATION: managed BSS member
462 * @NL80211_IFTYPE_AP: access point
463 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
464 * @NL80211_IFTYPE_WDS: wireless distribution interface
465 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
466 * @NL80211_IFTYPE_MESH_POINT: mesh point
467 * @NL80211_IFTYPE_MAX: highest interface type number currently defined
468 * @__NL80211_IFTYPE_AFTER_LAST: internal use
469 *
470 * These values are used with the %NL80211_ATTR_IFTYPE
471 * to set the type of an interface.
472 *
473 */
475 NL80211_IFTYPE_UNSPECIFIED,
476 NL80211_IFTYPE_ADHOC,
477 NL80211_IFTYPE_STATION,
478 NL80211_IFTYPE_AP,
479 NL80211_IFTYPE_AP_VLAN,
480 NL80211_IFTYPE_WDS,
481 NL80211_IFTYPE_MONITOR,
482 NL80211_IFTYPE_MESH_POINT,
484 /* keep last */
485 __NL80211_IFTYPE_AFTER_LAST,
487 };
489 /**
490 * enum nl80211_sta_flags - station flags
491 *
492 * Station flags. When a station is added to an AP interface, it is
493 * assumed to be already associated (and hence authenticated.)
494 *
495 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
496 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
497 * with short barker preamble
498 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
499 * @NL80211_STA_FLAG_MFP: station uses management frame protection
500 */
502 __NL80211_STA_FLAG_INVALID,
503 NL80211_STA_FLAG_AUTHORIZED,
504 NL80211_STA_FLAG_SHORT_PREAMBLE,
505 NL80211_STA_FLAG_WME,
506 NL80211_STA_FLAG_MFP,
508 /* keep last */
509 __NL80211_STA_FLAG_AFTER_LAST,
511 };
513 /**
514 * enum nl80211_rate_info - bitrate information
515 *
516 * These attribute types are used with %NL80211_STA_INFO_TXRATE
517 * when getting information about the bitrate of a station.
518 *
519 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
520 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
521 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
522 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
523 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
524 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
525 * @__NL80211_RATE_INFO_AFTER_LAST: internal use
526 */
528 __NL80211_RATE_INFO_INVALID,
529 NL80211_RATE_INFO_BITRATE,
530 NL80211_RATE_INFO_MCS,
531 NL80211_RATE_INFO_40_MHZ_WIDTH,
532 NL80211_RATE_INFO_SHORT_GI,
534 /* keep last */
535 __NL80211_RATE_INFO_AFTER_LAST,
537 };
539 /**
540 * enum nl80211_sta_info - station information
541 *
542 * These attribute types are used with %NL80211_ATTR_STA_INFO
543 * when getting information about a station.
544 *
545 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
546 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
547 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
548 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
549 * @__NL80211_STA_INFO_AFTER_LAST: internal
550 * @NL80211_STA_INFO_MAX: highest possible station info attribute
551 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
552 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
553 * containing info as possible, see &enum nl80211_sta_info_txrate.
554 * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
555 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
556 * station)
557 */
559 __NL80211_STA_INFO_INVALID,
560 NL80211_STA_INFO_INACTIVE_TIME,
561 NL80211_STA_INFO_RX_BYTES,
562 NL80211_STA_INFO_TX_BYTES,
563 NL80211_STA_INFO_LLID,
564 NL80211_STA_INFO_PLID,
565 NL80211_STA_INFO_PLINK_STATE,
566 NL80211_STA_INFO_SIGNAL,
567 NL80211_STA_INFO_TX_BITRATE,
568 NL80211_STA_INFO_RX_PACKETS,
569 NL80211_STA_INFO_TX_PACKETS,
571 /* keep last */
572 __NL80211_STA_INFO_AFTER_LAST,
574 };
576 /**
577 * enum nl80211_mpath_flags - nl80211 mesh path flags
578 *
579 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
580 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
581 * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
582 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
583 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
584 */
591 };
593 /**
594 * enum nl80211_mpath_info - mesh path information
595 *
596 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
597 * information about a mesh path.
598 *
599 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
600 * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
601 * @NL80211_ATTR_MPATH_DSN: destination sequence number
602 * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
603 * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
604 * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
605 * &enum nl80211_mpath_flags;
606 * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
607 * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
608 */
610 __NL80211_MPATH_INFO_INVALID,
611 NL80211_MPATH_INFO_FRAME_QLEN,
612 NL80211_MPATH_INFO_DSN,
613 NL80211_MPATH_INFO_METRIC,
614 NL80211_MPATH_INFO_EXPTIME,
615 NL80211_MPATH_INFO_FLAGS,
616 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
617 NL80211_MPATH_INFO_DISCOVERY_RETRIES,
619 /* keep last */
620 __NL80211_MPATH_INFO_AFTER_LAST,
622 };
624 /**
625 * enum nl80211_band_attr - band attributes
626 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
627 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
628 * an array of nested frequency attributes
629 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
630 * an array of nested bitrate attributes
631 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
632 * defined in 802.11n
633 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
634 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
635 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
636 */
638 __NL80211_BAND_ATTR_INVALID,
639 NL80211_BAND_ATTR_FREQS,
640 NL80211_BAND_ATTR_RATES,
642 NL80211_BAND_ATTR_HT_MCS_SET,
643 NL80211_BAND_ATTR_HT_CAPA,
644 NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
645 NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
647 /* keep last */
648 __NL80211_BAND_ATTR_AFTER_LAST,
650 };
652 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
654 /**
655 * enum nl80211_frequency_attr - frequency attributes
656 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
657 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
658 * regulatory domain.
659 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
660 * permitted on this channel in current regulatory domain.
661 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
662 * on this channel in current regulatory domain.
663 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
664 * on this channel in current regulatory domain.
665 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
666 * (100 * dBm).
667 */
669 __NL80211_FREQUENCY_ATTR_INVALID,
670 NL80211_FREQUENCY_ATTR_FREQ,
671 NL80211_FREQUENCY_ATTR_DISABLED,
672 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
673 NL80211_FREQUENCY_ATTR_NO_IBSS,
674 NL80211_FREQUENCY_ATTR_RADAR,
675 NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
677 /* keep last */
678 __NL80211_FREQUENCY_ATTR_AFTER_LAST,
680 };
682 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
684 /**
685 * enum nl80211_bitrate_attr - bitrate attributes
686 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
687 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
688 * in 2.4 GHz band.
689 */
691 __NL80211_BITRATE_ATTR_INVALID,
692 NL80211_BITRATE_ATTR_RATE,
693 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
695 /* keep last */
696 __NL80211_BITRATE_ATTR_AFTER_LAST,
698 };
700 /**
701 * enum nl80211_initiator - Indicates the initiator of a reg domain request
702 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
703 * regulatory domain.
704 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
705 * regulatory domain.
706 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
707 * wireless core it thinks its knows the regulatory domain we should be in.
708 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
709 * 802.11 country information element with regulatory information it
710 * thinks we should consider.
711 */
713 NL80211_REGDOM_SET_BY_CORE,
714 NL80211_REGDOM_SET_BY_USER,
715 NL80211_REGDOM_SET_BY_DRIVER,
716 NL80211_REGDOM_SET_BY_COUNTRY_IE,
717 };
719 /**
720 * enum nl80211_reg_type - specifies the type of regulatory domain
721 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
722 * to a specific country. When this is set you can count on the
723 * ISO / IEC 3166 alpha2 country code being valid.
724 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
725 * domain.
726 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
727 * driver specific world regulatory domain. These do not apply system-wide
728 * and are only applicable to the individual devices which have requested
729 * them to be applied.
730 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
731 * of an intersection between two regulatory domains -- the previously
732 * set regulatory domain on the system and the last accepted regulatory
733 * domain request to be processed.
734 */
736 NL80211_REGDOM_TYPE_COUNTRY,
737 NL80211_REGDOM_TYPE_WORLD,
738 NL80211_REGDOM_TYPE_CUSTOM_WORLD,
739 NL80211_REGDOM_TYPE_INTERSECTION,
740 };
742 /**
743 * enum nl80211_reg_rule_attr - regulatory rule attributes
744 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
745 * considerations for a given frequency range. These are the
746 * &enum nl80211_reg_rule_flags.
747 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
748 * rule in KHz. This is not a center of frequency but an actual regulatory
749 * band edge.
750 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
751 * in KHz. This is not a center a frequency but an actual regulatory
752 * band edge.
753 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
754 * frequency range, in KHz.
755 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
756 * for a given frequency range. The value is in mBi (100 * dBi).
757 * If you don't have one then don't send this.
758 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
759 * a given frequency range. The value is in mBm (100 * dBm).
760 */
762 __NL80211_REG_RULE_ATTR_INVALID,
763 NL80211_ATTR_REG_RULE_FLAGS,
765 NL80211_ATTR_FREQ_RANGE_START,
766 NL80211_ATTR_FREQ_RANGE_END,
767 NL80211_ATTR_FREQ_RANGE_MAX_BW,
769 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
770 NL80211_ATTR_POWER_RULE_MAX_EIRP,
772 /* keep last */
773 __NL80211_REG_RULE_ATTR_AFTER_LAST,
775 };
777 /**
778 * enum nl80211_reg_rule_flags - regulatory rule flags
779 *
780 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
781 * @NL80211_RRF_NO_CCK: CCK modulation not allowed
782 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
783 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
784 * @NL80211_RRF_DFS: DFS support is required to be used
785 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
786 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
787 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
788 * @NL80211_RRF_NO_IBSS: no IBSS is allowed
789 */
800 };
802 /**
803 * enum nl80211_mntr_flags - monitor configuration flags
804 *
805 * Monitor configuration flags.
806 *
807 * @__NL80211_MNTR_FLAG_INVALID: reserved
808 *
809 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
810 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
811 * @NL80211_MNTR_FLAG_CONTROL: pass control frames
812 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
813 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
814 * overrides all other flags.
815 *
816 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
817 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
818 */
820 __NL80211_MNTR_FLAG_INVALID,
821 NL80211_MNTR_FLAG_FCSFAIL,
822 NL80211_MNTR_FLAG_PLCPFAIL,
823 NL80211_MNTR_FLAG_CONTROL,
824 NL80211_MNTR_FLAG_OTHER_BSS,
825 NL80211_MNTR_FLAG_COOK_FRAMES,
827 /* keep last */
828 __NL80211_MNTR_FLAG_AFTER_LAST,
830 };
832 /**
833 * enum nl80211_meshconf_params - mesh configuration parameters
834 *
835 * Mesh configuration parameters
836 *
837 * @__NL80211_MESHCONF_INVALID: internal use
838 *
839 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
840 * millisecond units, used by the Peer Link Open message
841 *
842 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
843 * millisecond units, used by the peer link management to close a peer link
844 *
845 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
846 * millisecond units
847 *
848 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
849 * on this mesh interface
850 *
851 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
852 * open retries that can be sent to establish a new peer link instance in a
853 * mesh
854 *
855 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
856 * point.
857 *
858 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
859 * open peer links when we detect compatible mesh peers.
860 *
861 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
862 * containing a PREQ that an MP can send to a particular destination (path
863 * target)
864 *
865 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
866 * (in milliseconds)
867 *
868 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
869 * until giving up on a path discovery (in milliseconds)
870 *
871 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
872 * points receiving a PREQ shall consider the forwarding information from the
873 * root to be valid. (TU = time unit)
874 *
875 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
876 * TUs) during which an MP can send only one action frame containing a PREQ
877 * reference element
878 *
879 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
880 * that it takes for an HWMP information element to propagate across the mesh
881 *
882 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
883 *
884 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
885 */
887 __NL80211_MESHCONF_INVALID,
888 NL80211_MESHCONF_RETRY_TIMEOUT,
889 NL80211_MESHCONF_CONFIRM_TIMEOUT,
890 NL80211_MESHCONF_HOLDING_TIMEOUT,
891 NL80211_MESHCONF_MAX_PEER_LINKS,
892 NL80211_MESHCONF_MAX_RETRIES,
893 NL80211_MESHCONF_TTL,
894 NL80211_MESHCONF_AUTO_OPEN_PLINKS,
895 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
896 NL80211_MESHCONF_PATH_REFRESH_TIME,
897 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
898 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
899 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
900 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
902 /* keep last */
903 __NL80211_MESHCONF_ATTR_AFTER_LAST,
905 };
907 /**
908 * enum nl80211_txq_attr - TX queue parameter attributes
909 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
910 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
911 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
912 * disabled
913 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
914 * 2^n-1 in the range 1..32767]
915 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
916 * 2^n-1 in the range 1..32767]
917 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
918 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
919 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
920 */
922 __NL80211_TXQ_ATTR_INVALID,
923 NL80211_TXQ_ATTR_QUEUE,
924 NL80211_TXQ_ATTR_TXOP,
925 NL80211_TXQ_ATTR_CWMIN,
926 NL80211_TXQ_ATTR_CWMAX,
927 NL80211_TXQ_ATTR_AIFS,
929 /* keep last */
930 __NL80211_TXQ_ATTR_AFTER_LAST,
932 };
935 NL80211_TXQ_Q_VO,
936 NL80211_TXQ_Q_VI,
937 NL80211_TXQ_Q_BE,
938 NL80211_TXQ_Q_BK
939 };
942 NL80211_CHAN_NO_HT,
943 NL80211_CHAN_HT20,
944 NL80211_CHAN_HT40MINUS,
945 NL80211_CHAN_HT40PLUS
946 };
948 /**
949 * enum nl80211_bss - netlink attributes for a BSS
950 *
951 * @__NL80211_BSS_INVALID: invalid
952 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
953 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
954 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
955 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
956 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
957 * raw information elements from the probe response/beacon (bin)
958 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
959 * in mBm (100 * dBm) (s32)
960 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
961 * in unspecified units, scaled to 0..100 (u8)
962 * @__NL80211_BSS_AFTER_LAST: internal
963 * @NL80211_BSS_MAX: highest BSS attribute
964 */
966 __NL80211_BSS_INVALID,
967 NL80211_BSS_BSSID,
968 NL80211_BSS_FREQUENCY,
969 NL80211_BSS_TSF,
970 NL80211_BSS_BEACON_INTERVAL,
971 NL80211_BSS_CAPABILITY,
972 NL80211_BSS_INFORMATION_ELEMENTS,
973 NL80211_BSS_SIGNAL_MBM,
974 NL80211_BSS_SIGNAL_UNSPEC,
976 /* keep last */
977 __NL80211_BSS_AFTER_LAST,
979 };