2 * dwc3-pci.c - PCI Specific glue layer
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. The names of the above-listed copyright holders may not be used
19 * to endorse or promote products derived from this software without
20 * specific prior written permission.
22 * ALTERNATIVELY, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2, as published by the Free
24 * Software Foundation.
26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
27 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
28 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
30 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
31 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
32 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
33 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
34 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
35 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
36 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/slab.h>
42 #include <linux/pci.h>
43 #include <linux/platform_device.h>
45 #include <linux/usb/otg.h>
46 #include <linux/usb/nop-usb-xceiv.h>
48 /* FIXME define these in <linux/pci_ids.h> */
49 #define PCI_VENDOR_ID_SYNOPSYS 0x16c3
50 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
54 struct platform_device
*dwc3
;
55 struct platform_device
*usb2_phy
;
56 struct platform_device
*usb3_phy
;
59 static int dwc3_pci_register_phys(struct dwc3_pci
*glue
)
61 struct nop_usb_xceiv_platform_data pdata
;
62 struct platform_device
*pdev
;
65 memset(&pdata
, 0x00, sizeof(pdata
));
67 pdev
= platform_device_alloc("nop_usb_xceiv", 0);
71 glue
->usb2_phy
= pdev
;
72 pdata
.type
= USB_PHY_TYPE_USB2
;
74 ret
= platform_device_add_data(glue
->usb2_phy
, &pdata
, sizeof(pdata
));
78 pdev
= platform_device_alloc("nop_usb_xceiv", 1);
84 glue
->usb3_phy
= pdev
;
85 pdata
.type
= USB_PHY_TYPE_USB3
;
87 ret
= platform_device_add_data(glue
->usb3_phy
, &pdata
, sizeof(pdata
));
91 ret
= platform_device_add(glue
->usb2_phy
);
95 ret
= platform_device_add(glue
->usb3_phy
);
102 platform_device_del(glue
->usb2_phy
);
105 platform_device_put(glue
->usb3_phy
);
108 platform_device_put(glue
->usb2_phy
);
113 static int dwc3_pci_probe(struct pci_dev
*pci
,
114 const struct pci_device_id
*id
)
116 struct resource res
[2];
117 struct platform_device
*dwc3
;
118 struct dwc3_pci
*glue
;
120 struct device
*dev
= &pci
->dev
;
122 glue
= devm_kzalloc(dev
, sizeof(*glue
), GFP_KERNEL
);
124 dev_err(dev
, "not enough memory\n");
130 ret
= pci_enable_device(pci
);
132 dev_err(dev
, "failed to enable pci device\n");
136 pci_set_power_state(pci
, PCI_D0
);
139 ret
= dwc3_pci_register_phys(glue
);
141 dev_err(dev
, "couldn't register PHYs\n");
145 dwc3
= platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO
);
147 dev_err(dev
, "couldn't allocate dwc3 device\n");
152 memset(res
, 0x00, sizeof(struct resource
) * ARRAY_SIZE(res
));
154 res
[0].start
= pci_resource_start(pci
, 0);
155 res
[0].end
= pci_resource_end(pci
, 0);
156 res
[0].name
= "dwc_usb3";
157 res
[0].flags
= IORESOURCE_MEM
;
159 res
[1].start
= pci
->irq
;
160 res
[1].name
= "dwc_usb3";
161 res
[1].flags
= IORESOURCE_IRQ
;
163 ret
= platform_device_add_resources(dwc3
, res
, ARRAY_SIZE(res
));
165 dev_err(dev
, "couldn't add resources to dwc3 device\n");
169 pci_set_drvdata(pci
, glue
);
171 dma_set_coherent_mask(&dwc3
->dev
, dev
->coherent_dma_mask
);
173 dwc3
->dev
.dma_mask
= dev
->dma_mask
;
174 dwc3
->dev
.dma_parms
= dev
->dma_parms
;
175 dwc3
->dev
.parent
= dev
;
178 ret
= platform_device_add(dwc3
);
180 dev_err(dev
, "failed to register dwc3 device\n");
187 pci_set_drvdata(pci
, NULL
);
188 platform_device_put(dwc3
);
190 pci_disable_device(pci
);
195 static void dwc3_pci_remove(struct pci_dev
*pci
)
197 struct dwc3_pci
*glue
= pci_get_drvdata(pci
);
199 platform_device_unregister(glue
->usb2_phy
);
200 platform_device_unregister(glue
->usb3_phy
);
201 platform_device_unregister(glue
->dwc3
);
202 pci_set_drvdata(pci
, NULL
);
203 pci_disable_device(pci
);
206 static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table
) = {
208 PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS
,
209 PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3
),
211 { } /* Terminating Entry */
213 MODULE_DEVICE_TABLE(pci
, dwc3_pci_id_table
);
215 static struct pci_driver dwc3_pci_driver
= {
217 .id_table
= dwc3_pci_id_table
,
218 .probe
= dwc3_pci_probe
,
219 .remove
= dwc3_pci_remove
,
222 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
223 MODULE_LICENSE("Dual BSD/GPL");
224 MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
226 module_pci_driver(dwc3_pci_driver
);