ACPICA: New GPE handler callback definition
[linux-2.6/cjktty.git] / drivers / acpi / acpica / evxface.c
blobd193b905dfa21da03ca473edd4ab7cc67744283f
1 /******************************************************************************
3 * Module Name: evxface - External interfaces for ACPI events
5 *****************************************************************************/
7 /*
8 * Copyright (C) 2000 - 2010, Intel Corp.
9 * All rights reserved.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #include <acpi/acpi.h>
45 #include "accommon.h"
46 #include "acnamesp.h"
47 #include "acevents.h"
48 #include "acinterp.h"
50 #define _COMPONENT ACPI_EVENTS
51 ACPI_MODULE_NAME("evxface")
53 /*******************************************************************************
55 * FUNCTION: acpi_install_exception_handler
57 * PARAMETERS: Handler - Pointer to the handler function for the
58 * event
60 * RETURN: Status
62 * DESCRIPTION: Saves the pointer to the handler function
64 ******************************************************************************/
65 #ifdef ACPI_FUTURE_USAGE
66 acpi_status acpi_install_exception_handler(acpi_exception_handler handler)
68 acpi_status status;
70 ACPI_FUNCTION_TRACE(acpi_install_exception_handler);
72 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
73 if (ACPI_FAILURE(status)) {
74 return_ACPI_STATUS(status);
77 /* Don't allow two handlers. */
79 if (acpi_gbl_exception_handler) {
80 status = AE_ALREADY_EXISTS;
81 goto cleanup;
84 /* Install the handler */
86 acpi_gbl_exception_handler = handler;
88 cleanup:
89 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
90 return_ACPI_STATUS(status);
93 ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
94 #endif /* ACPI_FUTURE_USAGE */
95 /*******************************************************************************
97 * FUNCTION: acpi_install_fixed_event_handler
99 * PARAMETERS: Event - Event type to enable.
100 * Handler - Pointer to the handler function for the
101 * event
102 * Context - Value passed to the handler on each GPE
104 * RETURN: Status
106 * DESCRIPTION: Saves the pointer to the handler function and then enables the
107 * event.
109 ******************************************************************************/
110 acpi_status
111 acpi_install_fixed_event_handler(u32 event,
112 acpi_event_handler handler, void *context)
114 acpi_status status;
116 ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler);
118 /* Parameter validation */
120 if (event > ACPI_EVENT_MAX) {
121 return_ACPI_STATUS(AE_BAD_PARAMETER);
124 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
125 if (ACPI_FAILURE(status)) {
126 return_ACPI_STATUS(status);
129 /* Don't allow two handlers. */
131 if (NULL != acpi_gbl_fixed_event_handlers[event].handler) {
132 status = AE_ALREADY_EXISTS;
133 goto cleanup;
136 /* Install the handler before enabling the event */
138 acpi_gbl_fixed_event_handlers[event].handler = handler;
139 acpi_gbl_fixed_event_handlers[event].context = context;
141 status = acpi_clear_event(event);
142 if (ACPI_SUCCESS(status))
143 status = acpi_enable_event(event, 0);
144 if (ACPI_FAILURE(status)) {
145 ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X",
146 event));
148 /* Remove the handler */
150 acpi_gbl_fixed_event_handlers[event].handler = NULL;
151 acpi_gbl_fixed_event_handlers[event].context = NULL;
152 } else {
153 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
154 "Enabled fixed event %X, Handler=%p\n", event,
155 handler));
158 cleanup:
159 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
160 return_ACPI_STATUS(status);
163 ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler)
165 /*******************************************************************************
167 * FUNCTION: acpi_remove_fixed_event_handler
169 * PARAMETERS: Event - Event type to disable.
170 * Handler - Address of the handler
172 * RETURN: Status
174 * DESCRIPTION: Disables the event and unregisters the event handler.
176 ******************************************************************************/
177 acpi_status
178 acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
180 acpi_status status = AE_OK;
182 ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler);
184 /* Parameter validation */
186 if (event > ACPI_EVENT_MAX) {
187 return_ACPI_STATUS(AE_BAD_PARAMETER);
190 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
191 if (ACPI_FAILURE(status)) {
192 return_ACPI_STATUS(status);
195 /* Disable the event before removing the handler */
197 status = acpi_disable_event(event, 0);
199 /* Always Remove the handler */
201 acpi_gbl_fixed_event_handlers[event].handler = NULL;
202 acpi_gbl_fixed_event_handlers[event].context = NULL;
204 if (ACPI_FAILURE(status)) {
205 ACPI_WARNING((AE_INFO,
206 "Could not write to fixed event enable register 0x%X",
207 event));
208 } else {
209 ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
210 event));
213 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
214 return_ACPI_STATUS(status);
217 ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler)
219 /*******************************************************************************
221 * FUNCTION: acpi_populate_handler_object
223 * PARAMETERS: handler_obj - Handler object to populate
224 * handler_type - The type of handler:
225 * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
226 * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
227 * ACPI_ALL_NOTIFY: both system and device
228 * handler - Address of the handler
229 * context - Value passed to the handler on each GPE
230 * next - Address of a handler object to link to
232 * RETURN: None
234 * DESCRIPTION: Populate a handler object.
236 ******************************************************************************/
237 static void
238 acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
239 u32 handler_type,
240 acpi_notify_handler handler, void *context,
241 struct acpi_object_notify_handler *next)
243 handler_obj->handler_type = handler_type;
244 handler_obj->handler = handler;
245 handler_obj->context = context;
246 handler_obj->next = next;
249 /*******************************************************************************
251 * FUNCTION: acpi_add_handler_object
253 * PARAMETERS: parent_obj - Parent of the new object
254 * handler - Address of the handler
255 * context - Value passed to the handler on each GPE
257 * RETURN: Status
259 * DESCRIPTION: Create a new handler object and populate it.
261 ******************************************************************************/
262 static acpi_status
263 acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
264 acpi_notify_handler handler, void *context)
266 struct acpi_object_notify_handler *handler_obj;
268 /* The parent must not be a defice notify handler object. */
269 if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
270 return AE_BAD_PARAMETER;
272 handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
273 if (!handler_obj)
274 return AE_NO_MEMORY;
276 acpi_populate_handler_object(handler_obj,
277 ACPI_SYSTEM_NOTIFY,
278 handler, context,
279 parent_obj->next);
280 parent_obj->next = handler_obj;
282 return AE_OK;
285 /*******************************************************************************
287 * FUNCTION: acpi_install_notify_handler
289 * PARAMETERS: Device - The device for which notifies will be handled
290 * handler_type - The type of handler:
291 * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
292 * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
293 * ACPI_ALL_NOTIFY: both system and device
294 * Handler - Address of the handler
295 * Context - Value passed to the handler on each GPE
297 * RETURN: Status
299 * DESCRIPTION: Install a handler for notifies on an ACPI device
301 ******************************************************************************/
302 acpi_status
303 acpi_install_notify_handler(acpi_handle device,
304 u32 handler_type,
305 acpi_notify_handler handler, void *context)
307 union acpi_operand_object *obj_desc;
308 union acpi_operand_object *notify_obj;
309 struct acpi_namespace_node *node;
310 acpi_status status;
312 ACPI_FUNCTION_TRACE(acpi_install_notify_handler);
314 /* Parameter validation */
316 if ((!device) ||
317 (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
318 return_ACPI_STATUS(AE_BAD_PARAMETER);
321 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
322 if (ACPI_FAILURE(status)) {
323 return_ACPI_STATUS(status);
326 /* Convert and validate the device handle */
328 node = acpi_ns_validate_handle(device);
329 if (!node) {
330 status = AE_BAD_PARAMETER;
331 goto unlock_and_exit;
335 * Root Object:
336 * Registering a notify handler on the root object indicates that the
337 * caller wishes to receive notifications for all objects. Note that
338 * only one <external> global handler can be regsitered (per notify type).
340 if (device == ACPI_ROOT_OBJECT) {
342 /* Make sure the handler is not already installed */
344 if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
345 acpi_gbl_system_notify.handler) ||
346 ((handler_type & ACPI_DEVICE_NOTIFY) &&
347 acpi_gbl_device_notify.handler)) {
348 status = AE_ALREADY_EXISTS;
349 goto unlock_and_exit;
352 if (handler_type & ACPI_SYSTEM_NOTIFY) {
353 acpi_gbl_system_notify.node = node;
354 acpi_gbl_system_notify.handler = handler;
355 acpi_gbl_system_notify.context = context;
358 if (handler_type & ACPI_DEVICE_NOTIFY) {
359 acpi_gbl_device_notify.node = node;
360 acpi_gbl_device_notify.handler = handler;
361 acpi_gbl_device_notify.context = context;
364 /* Global notify handler installed */
368 * All Other Objects:
369 * Caller will only receive notifications specific to the target object.
370 * Note that only certain object types can receive notifications.
372 else {
373 /* Notifies allowed on this object? */
375 if (!acpi_ev_is_notify_object(node)) {
376 status = AE_TYPE;
377 goto unlock_and_exit;
380 /* Check for an existing internal object */
382 obj_desc = acpi_ns_get_attached_object(node);
383 if (obj_desc) {
385 /* Object exists. */
387 /* For a device notify, make sure there's no handler. */
388 if ((handler_type & ACPI_DEVICE_NOTIFY) &&
389 obj_desc->common_notify.device_notify) {
390 status = AE_ALREADY_EXISTS;
391 goto unlock_and_exit;
394 /* System notifies may have more handlers installed. */
395 notify_obj = obj_desc->common_notify.system_notify;
397 if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
398 struct acpi_object_notify_handler *parent_obj;
400 if (handler_type & ACPI_DEVICE_NOTIFY) {
401 status = AE_ALREADY_EXISTS;
402 goto unlock_and_exit;
405 parent_obj = &notify_obj->notify;
406 status = acpi_add_handler_object(parent_obj,
407 handler,
408 context);
409 goto unlock_and_exit;
411 } else {
412 /* Create a new object */
414 obj_desc = acpi_ut_create_internal_object(node->type);
415 if (!obj_desc) {
416 status = AE_NO_MEMORY;
417 goto unlock_and_exit;
420 /* Attach new object to the Node */
422 status =
423 acpi_ns_attach_object(device, obj_desc, node->type);
425 /* Remove local reference to the object */
427 acpi_ut_remove_reference(obj_desc);
428 if (ACPI_FAILURE(status)) {
429 goto unlock_and_exit;
433 /* Install the handler */
435 notify_obj =
436 acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
437 if (!notify_obj) {
438 status = AE_NO_MEMORY;
439 goto unlock_and_exit;
442 acpi_populate_handler_object(&notify_obj->notify,
443 handler_type,
444 handler, context,
445 NULL);
447 if (handler_type & ACPI_SYSTEM_NOTIFY) {
448 obj_desc->common_notify.system_notify = notify_obj;
451 if (handler_type & ACPI_DEVICE_NOTIFY) {
452 obj_desc->common_notify.device_notify = notify_obj;
455 if (handler_type == ACPI_ALL_NOTIFY) {
457 /* Extra ref if installed in both */
459 acpi_ut_add_reference(notify_obj);
463 unlock_and_exit:
464 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
465 return_ACPI_STATUS(status);
468 ACPI_EXPORT_SYMBOL(acpi_install_notify_handler)
470 /*******************************************************************************
472 * FUNCTION: acpi_remove_notify_handler
474 * PARAMETERS: Device - The device for which notifies will be handled
475 * handler_type - The type of handler:
476 * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
477 * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
478 * ACPI_ALL_NOTIFY: both system and device
479 * Handler - Address of the handler
481 * RETURN: Status
483 * DESCRIPTION: Remove a handler for notifies on an ACPI device
485 ******************************************************************************/
486 acpi_status
487 acpi_remove_notify_handler(acpi_handle device,
488 u32 handler_type, acpi_notify_handler handler)
490 union acpi_operand_object *notify_obj;
491 union acpi_operand_object *obj_desc;
492 struct acpi_namespace_node *node;
493 acpi_status status;
495 ACPI_FUNCTION_TRACE(acpi_remove_notify_handler);
497 /* Parameter validation */
499 if ((!device) ||
500 (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
501 status = AE_BAD_PARAMETER;
502 goto exit;
506 /* Make sure all deferred tasks are completed */
507 acpi_os_wait_events_complete(NULL);
509 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
510 if (ACPI_FAILURE(status)) {
511 goto exit;
514 /* Convert and validate the device handle */
516 node = acpi_ns_validate_handle(device);
517 if (!node) {
518 status = AE_BAD_PARAMETER;
519 goto unlock_and_exit;
522 /* Root Object */
524 if (device == ACPI_ROOT_OBJECT) {
525 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
526 "Removing notify handler for namespace root object\n"));
528 if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
529 !acpi_gbl_system_notify.handler) ||
530 ((handler_type & ACPI_DEVICE_NOTIFY) &&
531 !acpi_gbl_device_notify.handler)) {
532 status = AE_NOT_EXIST;
533 goto unlock_and_exit;
536 if (handler_type & ACPI_SYSTEM_NOTIFY) {
537 acpi_gbl_system_notify.node = NULL;
538 acpi_gbl_system_notify.handler = NULL;
539 acpi_gbl_system_notify.context = NULL;
542 if (handler_type & ACPI_DEVICE_NOTIFY) {
543 acpi_gbl_device_notify.node = NULL;
544 acpi_gbl_device_notify.handler = NULL;
545 acpi_gbl_device_notify.context = NULL;
549 /* All Other Objects */
551 else {
552 /* Notifies allowed on this object? */
554 if (!acpi_ev_is_notify_object(node)) {
555 status = AE_TYPE;
556 goto unlock_and_exit;
559 /* Check for an existing internal object */
561 obj_desc = acpi_ns_get_attached_object(node);
562 if (!obj_desc) {
563 status = AE_NOT_EXIST;
564 goto unlock_and_exit;
567 /* Object exists - make sure there's an existing handler */
569 if (handler_type & ACPI_SYSTEM_NOTIFY) {
570 struct acpi_object_notify_handler *handler_obj;
571 struct acpi_object_notify_handler *parent_obj;
573 notify_obj = obj_desc->common_notify.system_notify;
574 if (!notify_obj) {
575 status = AE_NOT_EXIST;
576 goto unlock_and_exit;
579 handler_obj = &notify_obj->notify;
580 parent_obj = NULL;
581 while (handler_obj->handler != handler) {
582 if (handler_obj->next) {
583 parent_obj = handler_obj;
584 handler_obj = handler_obj->next;
585 } else {
586 break;
590 if (handler_obj->handler != handler) {
591 status = AE_BAD_PARAMETER;
592 goto unlock_and_exit;
596 * Remove the handler. There are three possible cases.
597 * First, we may need to remove a non-embedded object.
598 * Second, we may need to remove the embedded object's
599 * handler data, while non-embedded objects exist.
600 * Finally, we may need to remove the embedded object
601 * entirely along with its container.
603 if (parent_obj) {
604 /* Non-embedded object is being removed. */
605 parent_obj->next = handler_obj->next;
606 ACPI_FREE(handler_obj);
607 } else if (notify_obj->notify.next) {
609 * The handler matches the embedded object, but
610 * there are more handler objects in the list.
611 * Replace the embedded object's data with the
612 * first next object's data and remove that
613 * object.
615 parent_obj = &notify_obj->notify;
616 handler_obj = notify_obj->notify.next;
617 *parent_obj = *handler_obj;
618 ACPI_FREE(handler_obj);
619 } else {
620 /* No more handler objects in the list. */
621 obj_desc->common_notify.system_notify = NULL;
622 acpi_ut_remove_reference(notify_obj);
626 if (handler_type & ACPI_DEVICE_NOTIFY) {
627 notify_obj = obj_desc->common_notify.device_notify;
628 if (!notify_obj) {
629 status = AE_NOT_EXIST;
630 goto unlock_and_exit;
633 if (notify_obj->notify.handler != handler) {
634 status = AE_BAD_PARAMETER;
635 goto unlock_and_exit;
638 /* Remove the handler */
639 obj_desc->common_notify.device_notify = NULL;
640 acpi_ut_remove_reference(notify_obj);
644 unlock_and_exit:
645 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
646 exit:
647 if (ACPI_FAILURE(status))
648 ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
649 return_ACPI_STATUS(status);
652 ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler)
654 /*******************************************************************************
656 * FUNCTION: acpi_install_gpe_handler
658 * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
659 * defined GPEs)
660 * gpe_number - The GPE number within the GPE block
661 * Type - Whether this GPE should be treated as an
662 * edge- or level-triggered interrupt.
663 * Address - Address of the handler
664 * Context - Value passed to the handler on each GPE
666 * RETURN: Status
668 * DESCRIPTION: Install a handler for a General Purpose Event.
670 ******************************************************************************/
671 acpi_status
672 acpi_install_gpe_handler(acpi_handle gpe_device,
673 u32 gpe_number,
674 u32 type, acpi_gpe_handler address, void *context)
676 struct acpi_gpe_event_info *gpe_event_info;
677 struct acpi_gpe_handler_info *handler;
678 acpi_status status;
679 acpi_cpu_flags flags;
681 ACPI_FUNCTION_TRACE(acpi_install_gpe_handler);
683 /* Parameter validation */
685 if ((!address) || (type & ~ACPI_GPE_XRUPT_TYPE_MASK)) {
686 return_ACPI_STATUS(AE_BAD_PARAMETER);
689 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
690 if (ACPI_FAILURE(status)) {
691 return_ACPI_STATUS(status);
694 /* Allocate memory for the handler object */
696 handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_handler_info));
697 if (!handler) {
698 status = AE_NO_MEMORY;
699 goto unlock_and_exit;
702 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
704 /* Ensure that we have a valid GPE number */
706 gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
707 if (!gpe_event_info) {
708 status = AE_BAD_PARAMETER;
709 goto free_and_exit;
712 /* Make sure that there isn't a handler there already */
714 if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
715 ACPI_GPE_DISPATCH_HANDLER) {
716 status = AE_ALREADY_EXISTS;
717 goto free_and_exit;
720 /* Allocate and init handler object */
722 handler->address = address;
723 handler->context = context;
724 handler->method_node = gpe_event_info->dispatch.method_node;
725 handler->original_flags = gpe_event_info->flags &
726 (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
729 * If the GPE is associated with a method, it might have been enabled
730 * automatically during initialization, in which case it has to be
731 * disabled now to avoid spurious execution of the handler.
734 if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
735 && gpe_event_info->runtime_count) {
736 handler->originally_enabled = 1;
737 (void)acpi_ev_remove_gpe_reference(gpe_event_info);
740 /* Install the handler */
742 gpe_event_info->dispatch.handler = handler;
744 /* Setup up dispatch flags to indicate handler (vs. method) */
746 gpe_event_info->flags &=
747 ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
748 gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER);
750 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
752 unlock_and_exit:
753 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
754 return_ACPI_STATUS(status);
756 free_and_exit:
757 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
758 ACPI_FREE(handler);
759 goto unlock_and_exit;
762 ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler)
764 /*******************************************************************************
766 * FUNCTION: acpi_remove_gpe_handler
768 * PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
769 * defined GPEs)
770 * gpe_number - The event to remove a handler
771 * Address - Address of the handler
773 * RETURN: Status
775 * DESCRIPTION: Remove a handler for a General Purpose acpi_event.
777 ******************************************************************************/
778 acpi_status
779 acpi_remove_gpe_handler(acpi_handle gpe_device,
780 u32 gpe_number, acpi_gpe_handler address)
782 struct acpi_gpe_event_info *gpe_event_info;
783 struct acpi_gpe_handler_info *handler;
784 acpi_status status;
785 acpi_cpu_flags flags;
787 ACPI_FUNCTION_TRACE(acpi_remove_gpe_handler);
789 /* Parameter validation */
791 if (!address) {
792 return_ACPI_STATUS(AE_BAD_PARAMETER);
795 /* Make sure all deferred tasks are completed */
797 acpi_os_wait_events_complete(NULL);
799 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
800 if (ACPI_FAILURE(status)) {
801 return_ACPI_STATUS(status);
804 flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
806 /* Ensure that we have a valid GPE number */
808 gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
809 if (!gpe_event_info) {
810 status = AE_BAD_PARAMETER;
811 goto unlock_and_exit;
814 /* Make sure that a handler is indeed installed */
816 if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) !=
817 ACPI_GPE_DISPATCH_HANDLER) {
818 status = AE_NOT_EXIST;
819 goto unlock_and_exit;
822 /* Make sure that the installed handler is the same */
824 if (gpe_event_info->dispatch.handler->address != address) {
825 status = AE_BAD_PARAMETER;
826 goto unlock_and_exit;
829 /* Remove the handler */
831 handler = gpe_event_info->dispatch.handler;
833 /* Restore Method node (if any), set dispatch flags */
835 gpe_event_info->dispatch.method_node = handler->method_node;
836 gpe_event_info->flags &=
837 ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
838 gpe_event_info->flags |= handler->original_flags;
841 * If the GPE was previously associated with a method and it was
842 * enabled, it should be enabled at this point to restore the
843 * post-initialization configuration.
846 if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
847 && handler->originally_enabled)
848 (void)acpi_ev_add_gpe_reference(gpe_event_info);
850 /* Now we can free the handler object */
852 ACPI_FREE(handler);
854 unlock_and_exit:
855 acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
857 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
858 return_ACPI_STATUS(status);
861 ACPI_EXPORT_SYMBOL(acpi_remove_gpe_handler)
863 /*******************************************************************************
865 * FUNCTION: acpi_acquire_global_lock
867 * PARAMETERS: Timeout - How long the caller is willing to wait
868 * Handle - Where the handle to the lock is returned
869 * (if acquired)
871 * RETURN: Status
873 * DESCRIPTION: Acquire the ACPI Global Lock
875 * Note: Allows callers with the same thread ID to acquire the global lock
876 * multiple times. In other words, externally, the behavior of the global lock
877 * is identical to an AML mutex. On the first acquire, a new handle is
878 * returned. On any subsequent calls to acquire by the same thread, the same
879 * handle is returned.
881 ******************************************************************************/
882 acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle)
884 acpi_status status;
886 if (!handle) {
887 return (AE_BAD_PARAMETER);
890 /* Must lock interpreter to prevent race conditions */
892 acpi_ex_enter_interpreter();
894 status = acpi_ex_acquire_mutex_object(timeout,
895 acpi_gbl_global_lock_mutex,
896 acpi_os_get_thread_id());
898 if (ACPI_SUCCESS(status)) {
900 /* Return the global lock handle (updated in acpi_ev_acquire_global_lock) */
902 *handle = acpi_gbl_global_lock_handle;
905 acpi_ex_exit_interpreter();
906 return (status);
909 ACPI_EXPORT_SYMBOL(acpi_acquire_global_lock)
911 /*******************************************************************************
913 * FUNCTION: acpi_release_global_lock
915 * PARAMETERS: Handle - Returned from acpi_acquire_global_lock
917 * RETURN: Status
919 * DESCRIPTION: Release the ACPI Global Lock. The handle must be valid.
921 ******************************************************************************/
922 acpi_status acpi_release_global_lock(u32 handle)
924 acpi_status status;
926 if (!handle || (handle != acpi_gbl_global_lock_handle)) {
927 return (AE_NOT_ACQUIRED);
930 status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex);
931 return (status);
934 ACPI_EXPORT_SYMBOL(acpi_release_global_lock)