3 * Written by Mark Hemment, 1996/97.
4 * (markhe@nextd.demon.co.uk)
6 * kmem_cache_destroy() + some cleanup - 1999 Andrea Arcangeli
8 * Major cleanup, different bufctl logic, per-cpu arrays
9 * (c) 2000 Manfred Spraul
11 * Cleanup, make the head arrays unconditional, preparation for NUMA
12 * (c) 2002 Manfred Spraul
14 * An implementation of the Slab Allocator as described in outline in;
15 * UNIX Internals: The New Frontiers by Uresh Vahalia
16 * Pub: Prentice Hall ISBN 0-13-101908-2
17 * or with a little more detail in;
18 * The Slab Allocator: An Object-Caching Kernel Memory Allocator
19 * Jeff Bonwick (Sun Microsystems).
20 * Presented at: USENIX Summer 1994 Technical Conference
22 * The memory is organized in caches, one cache for each object type.
23 * (e.g. inode_cache, dentry_cache, buffer_head, vm_area_struct)
24 * Each cache consists out of many slabs (they are small (usually one
25 * page long) and always contiguous), and each slab contains multiple
26 * initialized objects.
28 * This means, that your constructor is used only for newly allocated
29 * slabs and you must pass objects with the same intializations to
32 * Each cache can only support one memory type (GFP_DMA, GFP_HIGHMEM,
33 * normal). If you need a special memory type, then must create a new
34 * cache for that memory type.
36 * In order to reduce fragmentation, the slabs are sorted in 3 groups:
37 * full slabs with 0 free objects
39 * empty slabs with no allocated objects
41 * If partial slabs exist, then new allocations come from these slabs,
42 * otherwise from empty slabs or new slabs are allocated.
44 * kmem_cache_destroy() CAN CRASH if you try to allocate from the cache
45 * during kmem_cache_destroy(). The caller must prevent concurrent allocs.
47 * Each cache has a short per-cpu head array, most allocs
48 * and frees go into that array, and if that array overflows, then 1/2
49 * of the entries in the array are given back into the global cache.
50 * The head array is strictly LIFO and should improve the cache hit rates.
51 * On SMP, it additionally reduces the spinlock operations.
53 * The c_cpuarray may not be read with enabled local interrupts -
54 * it's changed with a smp_call_function().
56 * SMP synchronization:
57 * constructors and destructors are called without any locking.
58 * Several members in struct kmem_cache and struct slab never change, they
59 * are accessed without any locking.
60 * The per-cpu arrays are never accessed from the wrong cpu, no locking,
61 * and local interrupts are disabled so slab code is preempt-safe.
62 * The non-constant members are protected with a per-cache irq spinlock.
64 * Many thanks to Mark Hemment, who wrote another per-cpu slab patch
65 * in 2000 - many ideas in the current implementation are derived from
68 * Further notes from the original documentation:
70 * 11 April '97. Started multi-threading - markhe
71 * The global cache-chain is protected by the mutex 'cache_chain_mutex'.
72 * The sem is only needed when accessing/extending the cache-chain, which
73 * can never happen inside an interrupt (kmem_cache_create(),
74 * kmem_cache_shrink() and kmem_cache_reap()).
76 * At present, each engine can be growing a cache. This should be blocked.
78 * 15 March 2005. NUMA slab allocator.
79 * Shai Fultheim <shai@scalex86.org>.
80 * Shobhit Dayal <shobhit@calsoftinc.com>
81 * Alok N Kataria <alokk@calsoftinc.com>
82 * Christoph Lameter <christoph@lameter.com>
84 * Modified the slab allocator to be node aware on NUMA systems.
85 * Each node has its own list of partial, free and full slabs.
86 * All object allocations for a node occur from node specific slab lists.
89 #include <linux/config.h>
90 #include <linux/slab.h>
92 #include <linux/poison.h>
93 #include <linux/swap.h>
94 #include <linux/cache.h>
95 #include <linux/interrupt.h>
96 #include <linux/init.h>
97 #include <linux/compiler.h>
98 #include <linux/cpuset.h>
99 #include <linux/seq_file.h>
100 #include <linux/notifier.h>
101 #include <linux/kallsyms.h>
102 #include <linux/cpu.h>
103 #include <linux/sysctl.h>
104 #include <linux/module.h>
105 #include <linux/rcupdate.h>
106 #include <linux/string.h>
107 #include <linux/nodemask.h>
108 #include <linux/mempolicy.h>
109 #include <linux/mutex.h>
110 #include <linux/rtmutex.h>
112 #include <asm/uaccess.h>
113 #include <asm/cacheflush.h>
114 #include <asm/tlbflush.h>
115 #include <asm/page.h>
118 * DEBUG - 1 for kmem_cache_create() to honour; SLAB_DEBUG_INITIAL,
119 * SLAB_RED_ZONE & SLAB_POISON.
120 * 0 for faster, smaller code (especially in the critical paths).
122 * STATS - 1 to collect stats for /proc/slabinfo.
123 * 0 for faster, smaller code (especially in the critical paths).
125 * FORCED_DEBUG - 1 enables SLAB_RED_ZONE and SLAB_POISON (if possible)
128 #ifdef CONFIG_DEBUG_SLAB
131 #define FORCED_DEBUG 1
135 #define FORCED_DEBUG 0
138 /* Shouldn't this be in a header file somewhere? */
139 #define BYTES_PER_WORD sizeof(void *)
141 #ifndef cache_line_size
142 #define cache_line_size() L1_CACHE_BYTES
145 #ifndef ARCH_KMALLOC_MINALIGN
147 * Enforce a minimum alignment for the kmalloc caches.
148 * Usually, the kmalloc caches are cache_line_size() aligned, except when
149 * DEBUG and FORCED_DEBUG are enabled, then they are BYTES_PER_WORD aligned.
150 * Some archs want to perform DMA into kmalloc caches and need a guaranteed
151 * alignment larger than BYTES_PER_WORD. ARCH_KMALLOC_MINALIGN allows that.
152 * Note that this flag disables some debug features.
154 #define ARCH_KMALLOC_MINALIGN 0
157 #ifndef ARCH_SLAB_MINALIGN
159 * Enforce a minimum alignment for all caches.
160 * Intended for archs that get misalignment faults even for BYTES_PER_WORD
161 * aligned buffers. Includes ARCH_KMALLOC_MINALIGN.
162 * If possible: Do not enable this flag for CONFIG_DEBUG_SLAB, it disables
163 * some debug features.
165 #define ARCH_SLAB_MINALIGN 0
168 #ifndef ARCH_KMALLOC_FLAGS
169 #define ARCH_KMALLOC_FLAGS SLAB_HWCACHE_ALIGN
172 /* Legal flag mask for kmem_cache_create(). */
174 # define CREATE_MASK (SLAB_DEBUG_INITIAL | SLAB_RED_ZONE | \
175 SLAB_POISON | SLAB_HWCACHE_ALIGN | \
177 SLAB_MUST_HWCACHE_ALIGN | SLAB_STORE_USER | \
178 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
179 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
181 # define CREATE_MASK (SLAB_HWCACHE_ALIGN | \
182 SLAB_CACHE_DMA | SLAB_MUST_HWCACHE_ALIGN | \
183 SLAB_RECLAIM_ACCOUNT | SLAB_PANIC | \
184 SLAB_DESTROY_BY_RCU | SLAB_MEM_SPREAD)
190 * Bufctl's are used for linking objs within a slab
193 * This implementation relies on "struct page" for locating the cache &
194 * slab an object belongs to.
195 * This allows the bufctl structure to be small (one int), but limits
196 * the number of objects a slab (not a cache) can contain when off-slab
197 * bufctls are used. The limit is the size of the largest general cache
198 * that does not use off-slab slabs.
199 * For 32bit archs with 4 kB pages, is this 56.
200 * This is not serious, as it is only for large objects, when it is unwise
201 * to have too many per slab.
202 * Note: This limit can be raised by introducing a general cache whose size
203 * is less than 512 (PAGE_SIZE<<3), but greater than 256.
206 typedef unsigned int kmem_bufctl_t
;
207 #define BUFCTL_END (((kmem_bufctl_t)(~0U))-0)
208 #define BUFCTL_FREE (((kmem_bufctl_t)(~0U))-1)
209 #define BUFCTL_ACTIVE (((kmem_bufctl_t)(~0U))-2)
210 #define SLAB_LIMIT (((kmem_bufctl_t)(~0U))-3)
215 * Manages the objs in a slab. Placed either at the beginning of mem allocated
216 * for a slab, or allocated from an general cache.
217 * Slabs are chained into three list: fully used, partial, fully free slabs.
220 struct list_head list
;
221 unsigned long colouroff
;
222 void *s_mem
; /* including colour offset */
223 unsigned int inuse
; /* num of objs active in slab */
225 unsigned short nodeid
;
231 * slab_destroy on a SLAB_DESTROY_BY_RCU cache uses this structure to
232 * arrange for kmem_freepages to be called via RCU. This is useful if
233 * we need to approach a kernel structure obliquely, from its address
234 * obtained without the usual locking. We can lock the structure to
235 * stabilize it and check it's still at the given address, only if we
236 * can be sure that the memory has not been meanwhile reused for some
237 * other kind of object (which our subsystem's lock might corrupt).
239 * rcu_read_lock before reading the address, then rcu_read_unlock after
240 * taking the spinlock within the structure expected at that address.
242 * We assume struct slab_rcu can overlay struct slab when destroying.
245 struct rcu_head head
;
246 struct kmem_cache
*cachep
;
254 * - LIFO ordering, to hand out cache-warm objects from _alloc
255 * - reduce the number of linked list operations
256 * - reduce spinlock operations
258 * The limit is stored in the per-cpu structure to reduce the data cache
265 unsigned int batchcount
;
266 unsigned int touched
;
269 * Must have this definition in here for the proper
270 * alignment of array_cache. Also simplifies accessing
272 * [0] is for gcc 2.95. It should really be [].
277 * bootstrap: The caches do not work without cpuarrays anymore, but the
278 * cpuarrays are allocated from the generic caches...
280 #define BOOT_CPUCACHE_ENTRIES 1
281 struct arraycache_init
{
282 struct array_cache cache
;
283 void *entries
[BOOT_CPUCACHE_ENTRIES
];
287 * The slab lists for all objects.
290 struct list_head slabs_partial
; /* partial list first, better asm code */
291 struct list_head slabs_full
;
292 struct list_head slabs_free
;
293 unsigned long free_objects
;
294 unsigned int free_limit
;
295 unsigned int colour_next
; /* Per-node cache coloring */
296 spinlock_t list_lock
;
297 struct array_cache
*shared
; /* shared per node */
298 struct array_cache
**alien
; /* on other nodes */
299 unsigned long next_reap
; /* updated without locking */
300 int free_touched
; /* updated without locking */
304 * Need this for bootstrapping a per node allocator.
306 #define NUM_INIT_LISTS (2 * MAX_NUMNODES + 1)
307 struct kmem_list3 __initdata initkmem_list3
[NUM_INIT_LISTS
];
308 #define CACHE_CACHE 0
310 #define SIZE_L3 (1 + MAX_NUMNODES)
312 static int drain_freelist(struct kmem_cache
*cache
,
313 struct kmem_list3
*l3
, int tofree
);
314 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int len
,
316 static void enable_cpucache(struct kmem_cache
*cachep
);
317 static void cache_reap(void *unused
);
320 * This function must be completely optimized away if a constant is passed to
321 * it. Mostly the same as what is in linux/slab.h except it returns an index.
323 static __always_inline
int index_of(const size_t size
)
325 extern void __bad_size(void);
327 if (__builtin_constant_p(size
)) {
335 #include "linux/kmalloc_sizes.h"
343 static int slab_early_init
= 1;
345 #define INDEX_AC index_of(sizeof(struct arraycache_init))
346 #define INDEX_L3 index_of(sizeof(struct kmem_list3))
348 static void kmem_list3_init(struct kmem_list3
*parent
)
350 INIT_LIST_HEAD(&parent
->slabs_full
);
351 INIT_LIST_HEAD(&parent
->slabs_partial
);
352 INIT_LIST_HEAD(&parent
->slabs_free
);
353 parent
->shared
= NULL
;
354 parent
->alien
= NULL
;
355 parent
->colour_next
= 0;
356 spin_lock_init(&parent
->list_lock
);
357 parent
->free_objects
= 0;
358 parent
->free_touched
= 0;
361 #define MAKE_LIST(cachep, listp, slab, nodeid) \
363 INIT_LIST_HEAD(listp); \
364 list_splice(&(cachep->nodelists[nodeid]->slab), listp); \
367 #define MAKE_ALL_LISTS(cachep, ptr, nodeid) \
369 MAKE_LIST((cachep), (&(ptr)->slabs_full), slabs_full, nodeid); \
370 MAKE_LIST((cachep), (&(ptr)->slabs_partial), slabs_partial, nodeid); \
371 MAKE_LIST((cachep), (&(ptr)->slabs_free), slabs_free, nodeid); \
381 /* 1) per-cpu data, touched during every alloc/free */
382 struct array_cache
*array
[NR_CPUS
];
383 /* 2) Cache tunables. Protected by cache_chain_mutex */
384 unsigned int batchcount
;
388 unsigned int buffer_size
;
389 /* 3) touched by every alloc & free from the backend */
390 struct kmem_list3
*nodelists
[MAX_NUMNODES
];
392 unsigned int flags
; /* constant flags */
393 unsigned int num
; /* # of objs per slab */
395 /* 4) cache_grow/shrink */
396 /* order of pgs per slab (2^n) */
397 unsigned int gfporder
;
399 /* force GFP flags, e.g. GFP_DMA */
402 size_t colour
; /* cache colouring range */
403 unsigned int colour_off
; /* colour offset */
404 struct kmem_cache
*slabp_cache
;
405 unsigned int slab_size
;
406 unsigned int dflags
; /* dynamic flags */
408 /* constructor func */
409 void (*ctor
) (void *, struct kmem_cache
*, unsigned long);
411 /* de-constructor func */
412 void (*dtor
) (void *, struct kmem_cache
*, unsigned long);
414 /* 5) cache creation/removal */
416 struct list_head next
;
420 unsigned long num_active
;
421 unsigned long num_allocations
;
422 unsigned long high_mark
;
424 unsigned long reaped
;
425 unsigned long errors
;
426 unsigned long max_freeable
;
427 unsigned long node_allocs
;
428 unsigned long node_frees
;
429 unsigned long node_overflow
;
437 * If debugging is enabled, then the allocator can add additional
438 * fields and/or padding to every object. buffer_size contains the total
439 * object size including these internal fields, the following two
440 * variables contain the offset to the user object and its size.
447 #define CFLGS_OFF_SLAB (0x80000000UL)
448 #define OFF_SLAB(x) ((x)->flags & CFLGS_OFF_SLAB)
450 #define BATCHREFILL_LIMIT 16
452 * Optimization question: fewer reaps means less probability for unnessary
453 * cpucache drain/refill cycles.
455 * OTOH the cpuarrays can contain lots of objects,
456 * which could lock up otherwise freeable slabs.
458 #define REAPTIMEOUT_CPUC (2*HZ)
459 #define REAPTIMEOUT_LIST3 (4*HZ)
462 #define STATS_INC_ACTIVE(x) ((x)->num_active++)
463 #define STATS_DEC_ACTIVE(x) ((x)->num_active--)
464 #define STATS_INC_ALLOCED(x) ((x)->num_allocations++)
465 #define STATS_INC_GROWN(x) ((x)->grown++)
466 #define STATS_ADD_REAPED(x,y) ((x)->reaped += (y))
467 #define STATS_SET_HIGH(x) \
469 if ((x)->num_active > (x)->high_mark) \
470 (x)->high_mark = (x)->num_active; \
472 #define STATS_INC_ERR(x) ((x)->errors++)
473 #define STATS_INC_NODEALLOCS(x) ((x)->node_allocs++)
474 #define STATS_INC_NODEFREES(x) ((x)->node_frees++)
475 #define STATS_INC_ACOVERFLOW(x) ((x)->node_overflow++)
476 #define STATS_SET_FREEABLE(x, i) \
478 if ((x)->max_freeable < i) \
479 (x)->max_freeable = i; \
481 #define STATS_INC_ALLOCHIT(x) atomic_inc(&(x)->allochit)
482 #define STATS_INC_ALLOCMISS(x) atomic_inc(&(x)->allocmiss)
483 #define STATS_INC_FREEHIT(x) atomic_inc(&(x)->freehit)
484 #define STATS_INC_FREEMISS(x) atomic_inc(&(x)->freemiss)
486 #define STATS_INC_ACTIVE(x) do { } while (0)
487 #define STATS_DEC_ACTIVE(x) do { } while (0)
488 #define STATS_INC_ALLOCED(x) do { } while (0)
489 #define STATS_INC_GROWN(x) do { } while (0)
490 #define STATS_ADD_REAPED(x,y) do { } while (0)
491 #define STATS_SET_HIGH(x) do { } while (0)
492 #define STATS_INC_ERR(x) do { } while (0)
493 #define STATS_INC_NODEALLOCS(x) do { } while (0)
494 #define STATS_INC_NODEFREES(x) do { } while (0)
495 #define STATS_INC_ACOVERFLOW(x) do { } while (0)
496 #define STATS_SET_FREEABLE(x, i) do { } while (0)
497 #define STATS_INC_ALLOCHIT(x) do { } while (0)
498 #define STATS_INC_ALLOCMISS(x) do { } while (0)
499 #define STATS_INC_FREEHIT(x) do { } while (0)
500 #define STATS_INC_FREEMISS(x) do { } while (0)
506 * memory layout of objects:
508 * 0 .. cachep->obj_offset - BYTES_PER_WORD - 1: padding. This ensures that
509 * the end of an object is aligned with the end of the real
510 * allocation. Catches writes behind the end of the allocation.
511 * cachep->obj_offset - BYTES_PER_WORD .. cachep->obj_offset - 1:
513 * cachep->obj_offset: The real object.
514 * cachep->buffer_size - 2* BYTES_PER_WORD: redzone word [BYTES_PER_WORD long]
515 * cachep->buffer_size - 1* BYTES_PER_WORD: last caller address
516 * [BYTES_PER_WORD long]
518 static int obj_offset(struct kmem_cache
*cachep
)
520 return cachep
->obj_offset
;
523 static int obj_size(struct kmem_cache
*cachep
)
525 return cachep
->obj_size
;
528 static unsigned long *dbg_redzone1(struct kmem_cache
*cachep
, void *objp
)
530 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
531 return (unsigned long*) (objp
+obj_offset(cachep
)-BYTES_PER_WORD
);
534 static unsigned long *dbg_redzone2(struct kmem_cache
*cachep
, void *objp
)
536 BUG_ON(!(cachep
->flags
& SLAB_RED_ZONE
));
537 if (cachep
->flags
& SLAB_STORE_USER
)
538 return (unsigned long *)(objp
+ cachep
->buffer_size
-
540 return (unsigned long *)(objp
+ cachep
->buffer_size
- BYTES_PER_WORD
);
543 static void **dbg_userword(struct kmem_cache
*cachep
, void *objp
)
545 BUG_ON(!(cachep
->flags
& SLAB_STORE_USER
));
546 return (void **)(objp
+ cachep
->buffer_size
- BYTES_PER_WORD
);
551 #define obj_offset(x) 0
552 #define obj_size(cachep) (cachep->buffer_size)
553 #define dbg_redzone1(cachep, objp) ({BUG(); (unsigned long *)NULL;})
554 #define dbg_redzone2(cachep, objp) ({BUG(); (unsigned long *)NULL;})
555 #define dbg_userword(cachep, objp) ({BUG(); (void **)NULL;})
560 * Maximum size of an obj (in 2^order pages) and absolute limit for the gfp
563 #if defined(CONFIG_LARGE_ALLOCS)
564 #define MAX_OBJ_ORDER 13 /* up to 32Mb */
565 #define MAX_GFP_ORDER 13 /* up to 32Mb */
566 #elif defined(CONFIG_MMU)
567 #define MAX_OBJ_ORDER 5 /* 32 pages */
568 #define MAX_GFP_ORDER 5 /* 32 pages */
570 #define MAX_OBJ_ORDER 8 /* up to 1Mb */
571 #define MAX_GFP_ORDER 8 /* up to 1Mb */
575 * Do not go above this order unless 0 objects fit into the slab.
577 #define BREAK_GFP_ORDER_HI 1
578 #define BREAK_GFP_ORDER_LO 0
579 static int slab_break_gfp_order
= BREAK_GFP_ORDER_LO
;
582 * Functions for storing/retrieving the cachep and or slab from the page
583 * allocator. These are used to find the slab an obj belongs to. With kfree(),
584 * these are used to find the cache which an obj belongs to.
586 static inline void page_set_cache(struct page
*page
, struct kmem_cache
*cache
)
588 page
->lru
.next
= (struct list_head
*)cache
;
591 static inline struct kmem_cache
*page_get_cache(struct page
*page
)
593 if (unlikely(PageCompound(page
)))
594 page
= (struct page
*)page_private(page
);
595 BUG_ON(!PageSlab(page
));
596 return (struct kmem_cache
*)page
->lru
.next
;
599 static inline void page_set_slab(struct page
*page
, struct slab
*slab
)
601 page
->lru
.prev
= (struct list_head
*)slab
;
604 static inline struct slab
*page_get_slab(struct page
*page
)
606 if (unlikely(PageCompound(page
)))
607 page
= (struct page
*)page_private(page
);
608 BUG_ON(!PageSlab(page
));
609 return (struct slab
*)page
->lru
.prev
;
612 static inline struct kmem_cache
*virt_to_cache(const void *obj
)
614 struct page
*page
= virt_to_page(obj
);
615 return page_get_cache(page
);
618 static inline struct slab
*virt_to_slab(const void *obj
)
620 struct page
*page
= virt_to_page(obj
);
621 return page_get_slab(page
);
624 static inline void *index_to_obj(struct kmem_cache
*cache
, struct slab
*slab
,
627 return slab
->s_mem
+ cache
->buffer_size
* idx
;
630 static inline unsigned int obj_to_index(struct kmem_cache
*cache
,
631 struct slab
*slab
, void *obj
)
633 return (unsigned)(obj
- slab
->s_mem
) / cache
->buffer_size
;
637 * These are the default caches for kmalloc. Custom caches can have other sizes.
639 struct cache_sizes malloc_sizes
[] = {
640 #define CACHE(x) { .cs_size = (x) },
641 #include <linux/kmalloc_sizes.h>
645 EXPORT_SYMBOL(malloc_sizes
);
647 /* Must match cache_sizes above. Out of line to keep cache footprint low. */
653 static struct cache_names __initdata cache_names
[] = {
654 #define CACHE(x) { .name = "size-" #x, .name_dma = "size-" #x "(DMA)" },
655 #include <linux/kmalloc_sizes.h>
660 static struct arraycache_init initarray_cache __initdata
=
661 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
662 static struct arraycache_init initarray_generic
=
663 { {0, BOOT_CPUCACHE_ENTRIES
, 1, 0} };
665 /* internal cache of cache description objs */
666 static struct kmem_cache cache_cache
= {
668 .limit
= BOOT_CPUCACHE_ENTRIES
,
670 .buffer_size
= sizeof(struct kmem_cache
),
671 .name
= "kmem_cache",
673 .obj_size
= sizeof(struct kmem_cache
),
677 #ifdef CONFIG_LOCKDEP
680 * Slab sometimes uses the kmalloc slabs to store the slab headers
681 * for other slabs "off slab".
682 * The locking for this is tricky in that it nests within the locks
683 * of all other slabs in a few places; to deal with this special
684 * locking we put on-slab caches into a separate lock-class.
686 static struct lock_class_key on_slab_key
;
688 static inline void init_lock_keys(struct cache_sizes
*s
)
692 for (q
= 0; q
< MAX_NUMNODES
; q
++) {
693 if (!s
->cs_cachep
->nodelists
[q
] || OFF_SLAB(s
->cs_cachep
))
695 lockdep_set_class(&s
->cs_cachep
->nodelists
[q
]->list_lock
,
701 static inline void init_lock_keys(struct cache_sizes
*s
)
708 /* Guard access to the cache-chain. */
709 static DEFINE_MUTEX(cache_chain_mutex
);
710 static struct list_head cache_chain
;
713 * vm_enough_memory() looks at this to determine how many slab-allocated pages
714 * are possibly freeable under pressure
716 * SLAB_RECLAIM_ACCOUNT turns this on per-slab
718 atomic_t slab_reclaim_pages
;
721 * chicken and egg problem: delay the per-cpu array allocation
722 * until the general caches are up.
732 * used by boot code to determine if it can use slab based allocator
734 int slab_is_available(void)
736 return g_cpucache_up
== FULL
;
739 static DEFINE_PER_CPU(struct work_struct
, reap_work
);
741 static inline struct array_cache
*cpu_cache_get(struct kmem_cache
*cachep
)
743 return cachep
->array
[smp_processor_id()];
746 static inline struct kmem_cache
*__find_general_cachep(size_t size
,
749 struct cache_sizes
*csizep
= malloc_sizes
;
752 /* This happens if someone tries to call
753 * kmem_cache_create(), or __kmalloc(), before
754 * the generic caches are initialized.
756 BUG_ON(malloc_sizes
[INDEX_AC
].cs_cachep
== NULL
);
758 while (size
> csizep
->cs_size
)
762 * Really subtle: The last entry with cs->cs_size==ULONG_MAX
763 * has cs_{dma,}cachep==NULL. Thus no special case
764 * for large kmalloc calls required.
766 if (unlikely(gfpflags
& GFP_DMA
))
767 return csizep
->cs_dmacachep
;
768 return csizep
->cs_cachep
;
771 static struct kmem_cache
*kmem_find_general_cachep(size_t size
, gfp_t gfpflags
)
773 return __find_general_cachep(size
, gfpflags
);
776 static size_t slab_mgmt_size(size_t nr_objs
, size_t align
)
778 return ALIGN(sizeof(struct slab
)+nr_objs
*sizeof(kmem_bufctl_t
), align
);
782 * Calculate the number of objects and left-over bytes for a given buffer size.
784 static void cache_estimate(unsigned long gfporder
, size_t buffer_size
,
785 size_t align
, int flags
, size_t *left_over
,
790 size_t slab_size
= PAGE_SIZE
<< gfporder
;
793 * The slab management structure can be either off the slab or
794 * on it. For the latter case, the memory allocated for a
798 * - One kmem_bufctl_t for each object
799 * - Padding to respect alignment of @align
800 * - @buffer_size bytes for each object
802 * If the slab management structure is off the slab, then the
803 * alignment will already be calculated into the size. Because
804 * the slabs are all pages aligned, the objects will be at the
805 * correct alignment when allocated.
807 if (flags
& CFLGS_OFF_SLAB
) {
809 nr_objs
= slab_size
/ buffer_size
;
811 if (nr_objs
> SLAB_LIMIT
)
812 nr_objs
= SLAB_LIMIT
;
815 * Ignore padding for the initial guess. The padding
816 * is at most @align-1 bytes, and @buffer_size is at
817 * least @align. In the worst case, this result will
818 * be one greater than the number of objects that fit
819 * into the memory allocation when taking the padding
822 nr_objs
= (slab_size
- sizeof(struct slab
)) /
823 (buffer_size
+ sizeof(kmem_bufctl_t
));
826 * This calculated number will be either the right
827 * amount, or one greater than what we want.
829 if (slab_mgmt_size(nr_objs
, align
) + nr_objs
*buffer_size
833 if (nr_objs
> SLAB_LIMIT
)
834 nr_objs
= SLAB_LIMIT
;
836 mgmt_size
= slab_mgmt_size(nr_objs
, align
);
839 *left_over
= slab_size
- nr_objs
*buffer_size
- mgmt_size
;
842 #define slab_error(cachep, msg) __slab_error(__FUNCTION__, cachep, msg)
844 static void __slab_error(const char *function
, struct kmem_cache
*cachep
,
847 printk(KERN_ERR
"slab error in %s(): cache `%s': %s\n",
848 function
, cachep
->name
, msg
);
854 * Special reaping functions for NUMA systems called from cache_reap().
855 * These take care of doing round robin flushing of alien caches (containing
856 * objects freed on different nodes from which they were allocated) and the
857 * flushing of remote pcps by calling drain_node_pages.
859 static DEFINE_PER_CPU(unsigned long, reap_node
);
861 static void init_reap_node(int cpu
)
865 node
= next_node(cpu_to_node(cpu
), node_online_map
);
866 if (node
== MAX_NUMNODES
)
867 node
= first_node(node_online_map
);
869 __get_cpu_var(reap_node
) = node
;
872 static void next_reap_node(void)
874 int node
= __get_cpu_var(reap_node
);
877 * Also drain per cpu pages on remote zones
879 if (node
!= numa_node_id())
880 drain_node_pages(node
);
882 node
= next_node(node
, node_online_map
);
883 if (unlikely(node
>= MAX_NUMNODES
))
884 node
= first_node(node_online_map
);
885 __get_cpu_var(reap_node
) = node
;
889 #define init_reap_node(cpu) do { } while (0)
890 #define next_reap_node(void) do { } while (0)
894 * Initiate the reap timer running on the target CPU. We run at around 1 to 2Hz
895 * via the workqueue/eventd.
896 * Add the CPU number into the expiration time to minimize the possibility of
897 * the CPUs getting into lockstep and contending for the global cache chain
900 static void __devinit
start_cpu_timer(int cpu
)
902 struct work_struct
*reap_work
= &per_cpu(reap_work
, cpu
);
905 * When this gets called from do_initcalls via cpucache_init(),
906 * init_workqueues() has already run, so keventd will be setup
909 if (keventd_up() && reap_work
->func
== NULL
) {
911 INIT_WORK(reap_work
, cache_reap
, NULL
);
912 schedule_delayed_work_on(cpu
, reap_work
, HZ
+ 3 * cpu
);
916 static struct array_cache
*alloc_arraycache(int node
, int entries
,
919 int memsize
= sizeof(void *) * entries
+ sizeof(struct array_cache
);
920 struct array_cache
*nc
= NULL
;
922 nc
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
926 nc
->batchcount
= batchcount
;
928 spin_lock_init(&nc
->lock
);
934 * Transfer objects in one arraycache to another.
935 * Locking must be handled by the caller.
937 * Return the number of entries transferred.
939 static int transfer_objects(struct array_cache
*to
,
940 struct array_cache
*from
, unsigned int max
)
942 /* Figure out how many entries to transfer */
943 int nr
= min(min(from
->avail
, max
), to
->limit
- to
->avail
);
948 memcpy(to
->entry
+ to
->avail
, from
->entry
+ from
->avail
-nr
,
958 static void *__cache_alloc_node(struct kmem_cache
*, gfp_t
, int);
959 static void *alternate_node_alloc(struct kmem_cache
*, gfp_t
);
961 static struct array_cache
**alloc_alien_cache(int node
, int limit
)
963 struct array_cache
**ac_ptr
;
964 int memsize
= sizeof(void *) * MAX_NUMNODES
;
969 ac_ptr
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
972 if (i
== node
|| !node_online(i
)) {
976 ac_ptr
[i
] = alloc_arraycache(node
, limit
, 0xbaadf00d);
978 for (i
--; i
<= 0; i
--)
988 static void free_alien_cache(struct array_cache
**ac_ptr
)
999 static void __drain_alien_cache(struct kmem_cache
*cachep
,
1000 struct array_cache
*ac
, int node
)
1002 struct kmem_list3
*rl3
= cachep
->nodelists
[node
];
1005 spin_lock(&rl3
->list_lock
);
1007 * Stuff objects into the remote nodes shared array first.
1008 * That way we could avoid the overhead of putting the objects
1009 * into the free lists and getting them back later.
1012 transfer_objects(rl3
->shared
, ac
, ac
->limit
);
1014 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
1016 spin_unlock(&rl3
->list_lock
);
1021 * Called from cache_reap() to regularly drain alien caches round robin.
1023 static void reap_alien(struct kmem_cache
*cachep
, struct kmem_list3
*l3
)
1025 int node
= __get_cpu_var(reap_node
);
1028 struct array_cache
*ac
= l3
->alien
[node
];
1030 if (ac
&& ac
->avail
&& spin_trylock_irq(&ac
->lock
)) {
1031 __drain_alien_cache(cachep
, ac
, node
);
1032 spin_unlock_irq(&ac
->lock
);
1037 static void drain_alien_cache(struct kmem_cache
*cachep
,
1038 struct array_cache
**alien
)
1041 struct array_cache
*ac
;
1042 unsigned long flags
;
1044 for_each_online_node(i
) {
1047 spin_lock_irqsave(&ac
->lock
, flags
);
1048 __drain_alien_cache(cachep
, ac
, i
);
1049 spin_unlock_irqrestore(&ac
->lock
, flags
);
1054 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
1056 struct slab
*slabp
= virt_to_slab(objp
);
1057 int nodeid
= slabp
->nodeid
;
1058 struct kmem_list3
*l3
;
1059 struct array_cache
*alien
= NULL
;
1062 * Make sure we are not freeing a object from another node to the array
1063 * cache on this cpu.
1065 if (likely(slabp
->nodeid
== numa_node_id()))
1068 l3
= cachep
->nodelists
[numa_node_id()];
1069 STATS_INC_NODEFREES(cachep
);
1070 if (l3
->alien
&& l3
->alien
[nodeid
]) {
1071 alien
= l3
->alien
[nodeid
];
1072 spin_lock(&alien
->lock
);
1073 if (unlikely(alien
->avail
== alien
->limit
)) {
1074 STATS_INC_ACOVERFLOW(cachep
);
1075 __drain_alien_cache(cachep
, alien
, nodeid
);
1077 alien
->entry
[alien
->avail
++] = objp
;
1078 spin_unlock(&alien
->lock
);
1080 spin_lock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1081 free_block(cachep
, &objp
, 1, nodeid
);
1082 spin_unlock(&(cachep
->nodelists
[nodeid
])->list_lock
);
1089 #define drain_alien_cache(cachep, alien) do { } while (0)
1090 #define reap_alien(cachep, l3) do { } while (0)
1092 static inline struct array_cache
**alloc_alien_cache(int node
, int limit
)
1094 return (struct array_cache
**) 0x01020304ul
;
1097 static inline void free_alien_cache(struct array_cache
**ac_ptr
)
1101 static inline int cache_free_alien(struct kmem_cache
*cachep
, void *objp
)
1108 static int __cpuinit
cpuup_callback(struct notifier_block
*nfb
,
1109 unsigned long action
, void *hcpu
)
1111 long cpu
= (long)hcpu
;
1112 struct kmem_cache
*cachep
;
1113 struct kmem_list3
*l3
= NULL
;
1114 int node
= cpu_to_node(cpu
);
1115 int memsize
= sizeof(struct kmem_list3
);
1118 case CPU_UP_PREPARE
:
1119 mutex_lock(&cache_chain_mutex
);
1121 * We need to do this right in the beginning since
1122 * alloc_arraycache's are going to use this list.
1123 * kmalloc_node allows us to add the slab to the right
1124 * kmem_list3 and not this cpu's kmem_list3
1127 list_for_each_entry(cachep
, &cache_chain
, next
) {
1129 * Set up the size64 kmemlist for cpu before we can
1130 * begin anything. Make sure some other cpu on this
1131 * node has not already allocated this
1133 if (!cachep
->nodelists
[node
]) {
1134 l3
= kmalloc_node(memsize
, GFP_KERNEL
, node
);
1137 kmem_list3_init(l3
);
1138 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
1139 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1142 * The l3s don't come and go as CPUs come and
1143 * go. cache_chain_mutex is sufficient
1146 cachep
->nodelists
[node
] = l3
;
1149 spin_lock_irq(&cachep
->nodelists
[node
]->list_lock
);
1150 cachep
->nodelists
[node
]->free_limit
=
1151 (1 + nr_cpus_node(node
)) *
1152 cachep
->batchcount
+ cachep
->num
;
1153 spin_unlock_irq(&cachep
->nodelists
[node
]->list_lock
);
1157 * Now we can go ahead with allocating the shared arrays and
1160 list_for_each_entry(cachep
, &cache_chain
, next
) {
1161 struct array_cache
*nc
;
1162 struct array_cache
*shared
;
1163 struct array_cache
**alien
;
1165 nc
= alloc_arraycache(node
, cachep
->limit
,
1166 cachep
->batchcount
);
1169 shared
= alloc_arraycache(node
,
1170 cachep
->shared
* cachep
->batchcount
,
1175 alien
= alloc_alien_cache(node
, cachep
->limit
);
1178 cachep
->array
[cpu
] = nc
;
1179 l3
= cachep
->nodelists
[node
];
1182 spin_lock_irq(&l3
->list_lock
);
1185 * We are serialised from CPU_DEAD or
1186 * CPU_UP_CANCELLED by the cpucontrol lock
1188 l3
->shared
= shared
;
1197 spin_unlock_irq(&l3
->list_lock
);
1199 free_alien_cache(alien
);
1201 mutex_unlock(&cache_chain_mutex
);
1204 start_cpu_timer(cpu
);
1206 #ifdef CONFIG_HOTPLUG_CPU
1209 * Even if all the cpus of a node are down, we don't free the
1210 * kmem_list3 of any cache. This to avoid a race between
1211 * cpu_down, and a kmalloc allocation from another cpu for
1212 * memory from the node of the cpu going down. The list3
1213 * structure is usually allocated from kmem_cache_create() and
1214 * gets destroyed at kmem_cache_destroy().
1217 case CPU_UP_CANCELED
:
1218 mutex_lock(&cache_chain_mutex
);
1219 list_for_each_entry(cachep
, &cache_chain
, next
) {
1220 struct array_cache
*nc
;
1221 struct array_cache
*shared
;
1222 struct array_cache
**alien
;
1225 mask
= node_to_cpumask(node
);
1226 /* cpu is dead; no one can alloc from it. */
1227 nc
= cachep
->array
[cpu
];
1228 cachep
->array
[cpu
] = NULL
;
1229 l3
= cachep
->nodelists
[node
];
1232 goto free_array_cache
;
1234 spin_lock_irq(&l3
->list_lock
);
1236 /* Free limit for this kmem_list3 */
1237 l3
->free_limit
-= cachep
->batchcount
;
1239 free_block(cachep
, nc
->entry
, nc
->avail
, node
);
1241 if (!cpus_empty(mask
)) {
1242 spin_unlock_irq(&l3
->list_lock
);
1243 goto free_array_cache
;
1246 shared
= l3
->shared
;
1248 free_block(cachep
, l3
->shared
->entry
,
1249 l3
->shared
->avail
, node
);
1256 spin_unlock_irq(&l3
->list_lock
);
1260 drain_alien_cache(cachep
, alien
);
1261 free_alien_cache(alien
);
1267 * In the previous loop, all the objects were freed to
1268 * the respective cache's slabs, now we can go ahead and
1269 * shrink each nodelist to its limit.
1271 list_for_each_entry(cachep
, &cache_chain
, next
) {
1272 l3
= cachep
->nodelists
[node
];
1275 drain_freelist(cachep
, l3
, l3
->free_objects
);
1277 mutex_unlock(&cache_chain_mutex
);
1283 mutex_unlock(&cache_chain_mutex
);
1287 static struct notifier_block __cpuinitdata cpucache_notifier
= {
1288 &cpuup_callback
, NULL
, 0
1292 * swap the static kmem_list3 with kmalloced memory
1294 static void init_list(struct kmem_cache
*cachep
, struct kmem_list3
*list
,
1297 struct kmem_list3
*ptr
;
1299 BUG_ON(cachep
->nodelists
[nodeid
] != list
);
1300 ptr
= kmalloc_node(sizeof(struct kmem_list3
), GFP_KERNEL
, nodeid
);
1303 local_irq_disable();
1304 memcpy(ptr
, list
, sizeof(struct kmem_list3
));
1306 * Do not assume that spinlocks can be initialized via memcpy:
1308 spin_lock_init(&ptr
->list_lock
);
1310 MAKE_ALL_LISTS(cachep
, ptr
, nodeid
);
1311 cachep
->nodelists
[nodeid
] = ptr
;
1316 * Initialisation. Called after the page allocator have been initialised and
1317 * before smp_init().
1319 void __init
kmem_cache_init(void)
1322 struct cache_sizes
*sizes
;
1323 struct cache_names
*names
;
1327 for (i
= 0; i
< NUM_INIT_LISTS
; i
++) {
1328 kmem_list3_init(&initkmem_list3
[i
]);
1329 if (i
< MAX_NUMNODES
)
1330 cache_cache
.nodelists
[i
] = NULL
;
1334 * Fragmentation resistance on low memory - only use bigger
1335 * page orders on machines with more than 32MB of memory.
1337 if (num_physpages
> (32 << 20) >> PAGE_SHIFT
)
1338 slab_break_gfp_order
= BREAK_GFP_ORDER_HI
;
1340 /* Bootstrap is tricky, because several objects are allocated
1341 * from caches that do not exist yet:
1342 * 1) initialize the cache_cache cache: it contains the struct
1343 * kmem_cache structures of all caches, except cache_cache itself:
1344 * cache_cache is statically allocated.
1345 * Initially an __init data area is used for the head array and the
1346 * kmem_list3 structures, it's replaced with a kmalloc allocated
1347 * array at the end of the bootstrap.
1348 * 2) Create the first kmalloc cache.
1349 * The struct kmem_cache for the new cache is allocated normally.
1350 * An __init data area is used for the head array.
1351 * 3) Create the remaining kmalloc caches, with minimally sized
1353 * 4) Replace the __init data head arrays for cache_cache and the first
1354 * kmalloc cache with kmalloc allocated arrays.
1355 * 5) Replace the __init data for kmem_list3 for cache_cache and
1356 * the other cache's with kmalloc allocated memory.
1357 * 6) Resize the head arrays of the kmalloc caches to their final sizes.
1360 /* 1) create the cache_cache */
1361 INIT_LIST_HEAD(&cache_chain
);
1362 list_add(&cache_cache
.next
, &cache_chain
);
1363 cache_cache
.colour_off
= cache_line_size();
1364 cache_cache
.array
[smp_processor_id()] = &initarray_cache
.cache
;
1365 cache_cache
.nodelists
[numa_node_id()] = &initkmem_list3
[CACHE_CACHE
];
1367 cache_cache
.buffer_size
= ALIGN(cache_cache
.buffer_size
,
1370 for (order
= 0; order
< MAX_ORDER
; order
++) {
1371 cache_estimate(order
, cache_cache
.buffer_size
,
1372 cache_line_size(), 0, &left_over
, &cache_cache
.num
);
1373 if (cache_cache
.num
)
1376 BUG_ON(!cache_cache
.num
);
1377 cache_cache
.gfporder
= order
;
1378 cache_cache
.colour
= left_over
/ cache_cache
.colour_off
;
1379 cache_cache
.slab_size
= ALIGN(cache_cache
.num
* sizeof(kmem_bufctl_t
) +
1380 sizeof(struct slab
), cache_line_size());
1382 /* 2+3) create the kmalloc caches */
1383 sizes
= malloc_sizes
;
1384 names
= cache_names
;
1387 * Initialize the caches that provide memory for the array cache and the
1388 * kmem_list3 structures first. Without this, further allocations will
1392 sizes
[INDEX_AC
].cs_cachep
= kmem_cache_create(names
[INDEX_AC
].name
,
1393 sizes
[INDEX_AC
].cs_size
,
1394 ARCH_KMALLOC_MINALIGN
,
1395 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1398 if (INDEX_AC
!= INDEX_L3
) {
1399 sizes
[INDEX_L3
].cs_cachep
=
1400 kmem_cache_create(names
[INDEX_L3
].name
,
1401 sizes
[INDEX_L3
].cs_size
,
1402 ARCH_KMALLOC_MINALIGN
,
1403 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1407 slab_early_init
= 0;
1409 while (sizes
->cs_size
!= ULONG_MAX
) {
1411 * For performance, all the general caches are L1 aligned.
1412 * This should be particularly beneficial on SMP boxes, as it
1413 * eliminates "false sharing".
1414 * Note for systems short on memory removing the alignment will
1415 * allow tighter packing of the smaller caches.
1417 if (!sizes
->cs_cachep
) {
1418 sizes
->cs_cachep
= kmem_cache_create(names
->name
,
1420 ARCH_KMALLOC_MINALIGN
,
1421 ARCH_KMALLOC_FLAGS
|SLAB_PANIC
,
1424 init_lock_keys(sizes
);
1426 sizes
->cs_dmacachep
= kmem_cache_create(names
->name_dma
,
1428 ARCH_KMALLOC_MINALIGN
,
1429 ARCH_KMALLOC_FLAGS
|SLAB_CACHE_DMA
|
1435 /* 4) Replace the bootstrap head arrays */
1437 struct array_cache
*ptr
;
1439 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
1441 local_irq_disable();
1442 BUG_ON(cpu_cache_get(&cache_cache
) != &initarray_cache
.cache
);
1443 memcpy(ptr
, cpu_cache_get(&cache_cache
),
1444 sizeof(struct arraycache_init
));
1446 * Do not assume that spinlocks can be initialized via memcpy:
1448 spin_lock_init(&ptr
->lock
);
1450 cache_cache
.array
[smp_processor_id()] = ptr
;
1453 ptr
= kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
1455 local_irq_disable();
1456 BUG_ON(cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
)
1457 != &initarray_generic
.cache
);
1458 memcpy(ptr
, cpu_cache_get(malloc_sizes
[INDEX_AC
].cs_cachep
),
1459 sizeof(struct arraycache_init
));
1461 * Do not assume that spinlocks can be initialized via memcpy:
1463 spin_lock_init(&ptr
->lock
);
1465 malloc_sizes
[INDEX_AC
].cs_cachep
->array
[smp_processor_id()] =
1469 /* 5) Replace the bootstrap kmem_list3's */
1472 /* Replace the static kmem_list3 structures for the boot cpu */
1473 init_list(&cache_cache
, &initkmem_list3
[CACHE_CACHE
],
1476 for_each_online_node(node
) {
1477 init_list(malloc_sizes
[INDEX_AC
].cs_cachep
,
1478 &initkmem_list3
[SIZE_AC
+ node
], node
);
1480 if (INDEX_AC
!= INDEX_L3
) {
1481 init_list(malloc_sizes
[INDEX_L3
].cs_cachep
,
1482 &initkmem_list3
[SIZE_L3
+ node
],
1488 /* 6) resize the head arrays to their final sizes */
1490 struct kmem_cache
*cachep
;
1491 mutex_lock(&cache_chain_mutex
);
1492 list_for_each_entry(cachep
, &cache_chain
, next
)
1493 enable_cpucache(cachep
);
1494 mutex_unlock(&cache_chain_mutex
);
1498 g_cpucache_up
= FULL
;
1501 * Register a cpu startup notifier callback that initializes
1502 * cpu_cache_get for all new cpus
1504 register_cpu_notifier(&cpucache_notifier
);
1507 * The reap timers are started later, with a module init call: That part
1508 * of the kernel is not yet operational.
1512 static int __init
cpucache_init(void)
1517 * Register the timers that return unneeded pages to the page allocator
1519 for_each_online_cpu(cpu
)
1520 start_cpu_timer(cpu
);
1523 __initcall(cpucache_init
);
1526 * Interface to system's page allocator. No need to hold the cache-lock.
1528 * If we requested dmaable memory, we will get it. Even if we
1529 * did not request dmaable memory, we might get it, but that
1530 * would be relatively rare and ignorable.
1532 static void *kmem_getpages(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
1540 * Nommu uses slab's for process anonymous memory allocations, and thus
1541 * requires __GFP_COMP to properly refcount higher order allocations
1543 flags
|= __GFP_COMP
;
1545 flags
|= cachep
->gfpflags
;
1547 page
= alloc_pages_node(nodeid
, flags
, cachep
->gfporder
);
1551 nr_pages
= (1 << cachep
->gfporder
);
1552 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1553 atomic_add(nr_pages
, &slab_reclaim_pages
);
1554 add_zone_page_state(page_zone(page
), NR_SLAB
, nr_pages
);
1555 for (i
= 0; i
< nr_pages
; i
++)
1556 __SetPageSlab(page
+ i
);
1557 return page_address(page
);
1561 * Interface to system's page release.
1563 static void kmem_freepages(struct kmem_cache
*cachep
, void *addr
)
1565 unsigned long i
= (1 << cachep
->gfporder
);
1566 struct page
*page
= virt_to_page(addr
);
1567 const unsigned long nr_freed
= i
;
1569 sub_zone_page_state(page_zone(page
), NR_SLAB
, nr_freed
);
1571 BUG_ON(!PageSlab(page
));
1572 __ClearPageSlab(page
);
1575 if (current
->reclaim_state
)
1576 current
->reclaim_state
->reclaimed_slab
+= nr_freed
;
1577 free_pages((unsigned long)addr
, cachep
->gfporder
);
1578 if (cachep
->flags
& SLAB_RECLAIM_ACCOUNT
)
1579 atomic_sub(1 << cachep
->gfporder
, &slab_reclaim_pages
);
1582 static void kmem_rcu_free(struct rcu_head
*head
)
1584 struct slab_rcu
*slab_rcu
= (struct slab_rcu
*)head
;
1585 struct kmem_cache
*cachep
= slab_rcu
->cachep
;
1587 kmem_freepages(cachep
, slab_rcu
->addr
);
1588 if (OFF_SLAB(cachep
))
1589 kmem_cache_free(cachep
->slabp_cache
, slab_rcu
);
1594 #ifdef CONFIG_DEBUG_PAGEALLOC
1595 static void store_stackinfo(struct kmem_cache
*cachep
, unsigned long *addr
,
1596 unsigned long caller
)
1598 int size
= obj_size(cachep
);
1600 addr
= (unsigned long *)&((char *)addr
)[obj_offset(cachep
)];
1602 if (size
< 5 * sizeof(unsigned long))
1605 *addr
++ = 0x12345678;
1607 *addr
++ = smp_processor_id();
1608 size
-= 3 * sizeof(unsigned long);
1610 unsigned long *sptr
= &caller
;
1611 unsigned long svalue
;
1613 while (!kstack_end(sptr
)) {
1615 if (kernel_text_address(svalue
)) {
1617 size
-= sizeof(unsigned long);
1618 if (size
<= sizeof(unsigned long))
1624 *addr
++ = 0x87654321;
1628 static void poison_obj(struct kmem_cache
*cachep
, void *addr
, unsigned char val
)
1630 int size
= obj_size(cachep
);
1631 addr
= &((char *)addr
)[obj_offset(cachep
)];
1633 memset(addr
, val
, size
);
1634 *(unsigned char *)(addr
+ size
- 1) = POISON_END
;
1637 static void dump_line(char *data
, int offset
, int limit
)
1640 printk(KERN_ERR
"%03x:", offset
);
1641 for (i
= 0; i
< limit
; i
++)
1642 printk(" %02x", (unsigned char)data
[offset
+ i
]);
1649 static void print_objinfo(struct kmem_cache
*cachep
, void *objp
, int lines
)
1654 if (cachep
->flags
& SLAB_RED_ZONE
) {
1655 printk(KERN_ERR
"Redzone: 0x%lx/0x%lx.\n",
1656 *dbg_redzone1(cachep
, objp
),
1657 *dbg_redzone2(cachep
, objp
));
1660 if (cachep
->flags
& SLAB_STORE_USER
) {
1661 printk(KERN_ERR
"Last user: [<%p>]",
1662 *dbg_userword(cachep
, objp
));
1663 print_symbol("(%s)",
1664 (unsigned long)*dbg_userword(cachep
, objp
));
1667 realobj
= (char *)objp
+ obj_offset(cachep
);
1668 size
= obj_size(cachep
);
1669 for (i
= 0; i
< size
&& lines
; i
+= 16, lines
--) {
1672 if (i
+ limit
> size
)
1674 dump_line(realobj
, i
, limit
);
1678 static void check_poison_obj(struct kmem_cache
*cachep
, void *objp
)
1684 realobj
= (char *)objp
+ obj_offset(cachep
);
1685 size
= obj_size(cachep
);
1687 for (i
= 0; i
< size
; i
++) {
1688 char exp
= POISON_FREE
;
1691 if (realobj
[i
] != exp
) {
1697 "Slab corruption: start=%p, len=%d\n",
1699 print_objinfo(cachep
, objp
, 0);
1701 /* Hexdump the affected line */
1704 if (i
+ limit
> size
)
1706 dump_line(realobj
, i
, limit
);
1709 /* Limit to 5 lines */
1715 /* Print some data about the neighboring objects, if they
1718 struct slab
*slabp
= virt_to_slab(objp
);
1721 objnr
= obj_to_index(cachep
, slabp
, objp
);
1723 objp
= index_to_obj(cachep
, slabp
, objnr
- 1);
1724 realobj
= (char *)objp
+ obj_offset(cachep
);
1725 printk(KERN_ERR
"Prev obj: start=%p, len=%d\n",
1727 print_objinfo(cachep
, objp
, 2);
1729 if (objnr
+ 1 < cachep
->num
) {
1730 objp
= index_to_obj(cachep
, slabp
, objnr
+ 1);
1731 realobj
= (char *)objp
+ obj_offset(cachep
);
1732 printk(KERN_ERR
"Next obj: start=%p, len=%d\n",
1734 print_objinfo(cachep
, objp
, 2);
1742 * slab_destroy_objs - destroy a slab and its objects
1743 * @cachep: cache pointer being destroyed
1744 * @slabp: slab pointer being destroyed
1746 * Call the registered destructor for each object in a slab that is being
1749 static void slab_destroy_objs(struct kmem_cache
*cachep
, struct slab
*slabp
)
1752 for (i
= 0; i
< cachep
->num
; i
++) {
1753 void *objp
= index_to_obj(cachep
, slabp
, i
);
1755 if (cachep
->flags
& SLAB_POISON
) {
1756 #ifdef CONFIG_DEBUG_PAGEALLOC
1757 if (cachep
->buffer_size
% PAGE_SIZE
== 0 &&
1759 kernel_map_pages(virt_to_page(objp
),
1760 cachep
->buffer_size
/ PAGE_SIZE
, 1);
1762 check_poison_obj(cachep
, objp
);
1764 check_poison_obj(cachep
, objp
);
1767 if (cachep
->flags
& SLAB_RED_ZONE
) {
1768 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
1769 slab_error(cachep
, "start of a freed object "
1771 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
1772 slab_error(cachep
, "end of a freed object "
1775 if (cachep
->dtor
&& !(cachep
->flags
& SLAB_POISON
))
1776 (cachep
->dtor
) (objp
+ obj_offset(cachep
), cachep
, 0);
1780 static void slab_destroy_objs(struct kmem_cache
*cachep
, struct slab
*slabp
)
1784 for (i
= 0; i
< cachep
->num
; i
++) {
1785 void *objp
= index_to_obj(cachep
, slabp
, i
);
1786 (cachep
->dtor
) (objp
, cachep
, 0);
1793 * slab_destroy - destroy and release all objects in a slab
1794 * @cachep: cache pointer being destroyed
1795 * @slabp: slab pointer being destroyed
1797 * Destroy all the objs in a slab, and release the mem back to the system.
1798 * Before calling the slab must have been unlinked from the cache. The
1799 * cache-lock is not held/needed.
1801 static void slab_destroy(struct kmem_cache
*cachep
, struct slab
*slabp
)
1803 void *addr
= slabp
->s_mem
- slabp
->colouroff
;
1805 slab_destroy_objs(cachep
, slabp
);
1806 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
)) {
1807 struct slab_rcu
*slab_rcu
;
1809 slab_rcu
= (struct slab_rcu
*)slabp
;
1810 slab_rcu
->cachep
= cachep
;
1811 slab_rcu
->addr
= addr
;
1812 call_rcu(&slab_rcu
->head
, kmem_rcu_free
);
1814 kmem_freepages(cachep
, addr
);
1815 if (OFF_SLAB(cachep
))
1816 kmem_cache_free(cachep
->slabp_cache
, slabp
);
1821 * For setting up all the kmem_list3s for cache whose buffer_size is same as
1822 * size of kmem_list3.
1824 static void set_up_list3s(struct kmem_cache
*cachep
, int index
)
1828 for_each_online_node(node
) {
1829 cachep
->nodelists
[node
] = &initkmem_list3
[index
+ node
];
1830 cachep
->nodelists
[node
]->next_reap
= jiffies
+
1832 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1837 * calculate_slab_order - calculate size (page order) of slabs
1838 * @cachep: pointer to the cache that is being created
1839 * @size: size of objects to be created in this cache.
1840 * @align: required alignment for the objects.
1841 * @flags: slab allocation flags
1843 * Also calculates the number of objects per slab.
1845 * This could be made much more intelligent. For now, try to avoid using
1846 * high order pages for slabs. When the gfp() functions are more friendly
1847 * towards high-order requests, this should be changed.
1849 static size_t calculate_slab_order(struct kmem_cache
*cachep
,
1850 size_t size
, size_t align
, unsigned long flags
)
1852 unsigned long offslab_limit
;
1853 size_t left_over
= 0;
1856 for (gfporder
= 0; gfporder
<= MAX_GFP_ORDER
; gfporder
++) {
1860 cache_estimate(gfporder
, size
, align
, flags
, &remainder
, &num
);
1864 if (flags
& CFLGS_OFF_SLAB
) {
1866 * Max number of objs-per-slab for caches which
1867 * use off-slab slabs. Needed to avoid a possible
1868 * looping condition in cache_grow().
1870 offslab_limit
= size
- sizeof(struct slab
);
1871 offslab_limit
/= sizeof(kmem_bufctl_t
);
1873 if (num
> offslab_limit
)
1877 /* Found something acceptable - save it away */
1879 cachep
->gfporder
= gfporder
;
1880 left_over
= remainder
;
1883 * A VFS-reclaimable slab tends to have most allocations
1884 * as GFP_NOFS and we really don't want to have to be allocating
1885 * higher-order pages when we are unable to shrink dcache.
1887 if (flags
& SLAB_RECLAIM_ACCOUNT
)
1891 * Large number of objects is good, but very large slabs are
1892 * currently bad for the gfp()s.
1894 if (gfporder
>= slab_break_gfp_order
)
1898 * Acceptable internal fragmentation?
1900 if (left_over
* 8 <= (PAGE_SIZE
<< gfporder
))
1906 static void setup_cpu_cache(struct kmem_cache
*cachep
)
1908 if (g_cpucache_up
== FULL
) {
1909 enable_cpucache(cachep
);
1912 if (g_cpucache_up
== NONE
) {
1914 * Note: the first kmem_cache_create must create the cache
1915 * that's used by kmalloc(24), otherwise the creation of
1916 * further caches will BUG().
1918 cachep
->array
[smp_processor_id()] = &initarray_generic
.cache
;
1921 * If the cache that's used by kmalloc(sizeof(kmem_list3)) is
1922 * the first cache, then we need to set up all its list3s,
1923 * otherwise the creation of further caches will BUG().
1925 set_up_list3s(cachep
, SIZE_AC
);
1926 if (INDEX_AC
== INDEX_L3
)
1927 g_cpucache_up
= PARTIAL_L3
;
1929 g_cpucache_up
= PARTIAL_AC
;
1931 cachep
->array
[smp_processor_id()] =
1932 kmalloc(sizeof(struct arraycache_init
), GFP_KERNEL
);
1934 if (g_cpucache_up
== PARTIAL_AC
) {
1935 set_up_list3s(cachep
, SIZE_L3
);
1936 g_cpucache_up
= PARTIAL_L3
;
1939 for_each_online_node(node
) {
1940 cachep
->nodelists
[node
] =
1941 kmalloc_node(sizeof(struct kmem_list3
),
1943 BUG_ON(!cachep
->nodelists
[node
]);
1944 kmem_list3_init(cachep
->nodelists
[node
]);
1948 cachep
->nodelists
[numa_node_id()]->next_reap
=
1949 jiffies
+ REAPTIMEOUT_LIST3
+
1950 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
1952 cpu_cache_get(cachep
)->avail
= 0;
1953 cpu_cache_get(cachep
)->limit
= BOOT_CPUCACHE_ENTRIES
;
1954 cpu_cache_get(cachep
)->batchcount
= 1;
1955 cpu_cache_get(cachep
)->touched
= 0;
1956 cachep
->batchcount
= 1;
1957 cachep
->limit
= BOOT_CPUCACHE_ENTRIES
;
1961 * kmem_cache_create - Create a cache.
1962 * @name: A string which is used in /proc/slabinfo to identify this cache.
1963 * @size: The size of objects to be created in this cache.
1964 * @align: The required alignment for the objects.
1965 * @flags: SLAB flags
1966 * @ctor: A constructor for the objects.
1967 * @dtor: A destructor for the objects.
1969 * Returns a ptr to the cache on success, NULL on failure.
1970 * Cannot be called within a int, but can be interrupted.
1971 * The @ctor is run when new pages are allocated by the cache
1972 * and the @dtor is run before the pages are handed back.
1974 * @name must be valid until the cache is destroyed. This implies that
1975 * the module calling this has to destroy the cache before getting unloaded.
1979 * %SLAB_POISON - Poison the slab with a known test pattern (a5a5a5a5)
1980 * to catch references to uninitialised memory.
1982 * %SLAB_RED_ZONE - Insert `Red' zones around the allocated memory to check
1983 * for buffer overruns.
1985 * %SLAB_HWCACHE_ALIGN - Align the objects in this cache to a hardware
1986 * cacheline. This can be beneficial if you're counting cycles as closely
1990 kmem_cache_create (const char *name
, size_t size
, size_t align
,
1991 unsigned long flags
,
1992 void (*ctor
)(void*, struct kmem_cache
*, unsigned long),
1993 void (*dtor
)(void*, struct kmem_cache
*, unsigned long))
1995 size_t left_over
, slab_size
, ralign
;
1996 struct kmem_cache
*cachep
= NULL
, *pc
;
1999 * Sanity checks... these are all serious usage bugs.
2001 if (!name
|| in_interrupt() || (size
< BYTES_PER_WORD
) ||
2002 (size
> (1 << MAX_OBJ_ORDER
) * PAGE_SIZE
) || (dtor
&& !ctor
)) {
2003 printk(KERN_ERR
"%s: Early error in slab %s\n", __FUNCTION__
,
2009 * Prevent CPUs from coming and going.
2010 * lock_cpu_hotplug() nests outside cache_chain_mutex
2014 mutex_lock(&cache_chain_mutex
);
2016 list_for_each_entry(pc
, &cache_chain
, next
) {
2017 mm_segment_t old_fs
= get_fs();
2022 * This happens when the module gets unloaded and doesn't
2023 * destroy its slab cache and no-one else reuses the vmalloc
2024 * area of the module. Print a warning.
2027 res
= __get_user(tmp
, pc
->name
);
2030 printk("SLAB: cache with size %d has lost its name\n",
2035 if (!strcmp(pc
->name
, name
)) {
2036 printk("kmem_cache_create: duplicate cache %s\n", name
);
2043 WARN_ON(strchr(name
, ' ')); /* It confuses parsers */
2044 if ((flags
& SLAB_DEBUG_INITIAL
) && !ctor
) {
2045 /* No constructor, but inital state check requested */
2046 printk(KERN_ERR
"%s: No con, but init state check "
2047 "requested - %s\n", __FUNCTION__
, name
);
2048 flags
&= ~SLAB_DEBUG_INITIAL
;
2052 * Enable redzoning and last user accounting, except for caches with
2053 * large objects, if the increased size would increase the object size
2054 * above the next power of two: caches with object sizes just above a
2055 * power of two have a significant amount of internal fragmentation.
2057 if (size
< 4096 || fls(size
- 1) == fls(size
-1 + 3 * BYTES_PER_WORD
))
2058 flags
|= SLAB_RED_ZONE
| SLAB_STORE_USER
;
2059 if (!(flags
& SLAB_DESTROY_BY_RCU
))
2060 flags
|= SLAB_POISON
;
2062 if (flags
& SLAB_DESTROY_BY_RCU
)
2063 BUG_ON(flags
& SLAB_POISON
);
2065 if (flags
& SLAB_DESTROY_BY_RCU
)
2069 * Always checks flags, a caller might be expecting debug support which
2072 BUG_ON(flags
& ~CREATE_MASK
);
2075 * Check that size is in terms of words. This is needed to avoid
2076 * unaligned accesses for some archs when redzoning is used, and makes
2077 * sure any on-slab bufctl's are also correctly aligned.
2079 if (size
& (BYTES_PER_WORD
- 1)) {
2080 size
+= (BYTES_PER_WORD
- 1);
2081 size
&= ~(BYTES_PER_WORD
- 1);
2084 /* calculate the final buffer alignment: */
2086 /* 1) arch recommendation: can be overridden for debug */
2087 if (flags
& SLAB_HWCACHE_ALIGN
) {
2089 * Default alignment: as specified by the arch code. Except if
2090 * an object is really small, then squeeze multiple objects into
2093 ralign
= cache_line_size();
2094 while (size
<= ralign
/ 2)
2097 ralign
= BYTES_PER_WORD
;
2099 /* 2) arch mandated alignment: disables debug if necessary */
2100 if (ralign
< ARCH_SLAB_MINALIGN
) {
2101 ralign
= ARCH_SLAB_MINALIGN
;
2102 if (ralign
> BYTES_PER_WORD
)
2103 flags
&= ~(SLAB_RED_ZONE
| SLAB_STORE_USER
);
2105 /* 3) caller mandated alignment: disables debug if necessary */
2106 if (ralign
< align
) {
2108 if (ralign
> BYTES_PER_WORD
)
2109 flags
&= ~(SLAB_RED_ZONE
| SLAB_STORE_USER
);
2112 * 4) Store it. Note that the debug code below can reduce
2113 * the alignment to BYTES_PER_WORD.
2117 /* Get cache's description obj. */
2118 cachep
= kmem_cache_zalloc(&cache_cache
, SLAB_KERNEL
);
2123 cachep
->obj_size
= size
;
2125 if (flags
& SLAB_RED_ZONE
) {
2126 /* redzoning only works with word aligned caches */
2127 align
= BYTES_PER_WORD
;
2129 /* add space for red zone words */
2130 cachep
->obj_offset
+= BYTES_PER_WORD
;
2131 size
+= 2 * BYTES_PER_WORD
;
2133 if (flags
& SLAB_STORE_USER
) {
2134 /* user store requires word alignment and
2135 * one word storage behind the end of the real
2138 align
= BYTES_PER_WORD
;
2139 size
+= BYTES_PER_WORD
;
2141 #if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
2142 if (size
>= malloc_sizes
[INDEX_L3
+ 1].cs_size
2143 && cachep
->obj_size
> cache_line_size() && size
< PAGE_SIZE
) {
2144 cachep
->obj_offset
+= PAGE_SIZE
- size
;
2151 * Determine if the slab management is 'on' or 'off' slab.
2152 * (bootstrapping cannot cope with offslab caches so don't do
2155 if ((size
>= (PAGE_SIZE
>> 3)) && !slab_early_init
)
2157 * Size is large, assume best to place the slab management obj
2158 * off-slab (should allow better packing of objs).
2160 flags
|= CFLGS_OFF_SLAB
;
2162 size
= ALIGN(size
, align
);
2164 left_over
= calculate_slab_order(cachep
, size
, align
, flags
);
2167 printk("kmem_cache_create: couldn't create cache %s.\n", name
);
2168 kmem_cache_free(&cache_cache
, cachep
);
2172 slab_size
= ALIGN(cachep
->num
* sizeof(kmem_bufctl_t
)
2173 + sizeof(struct slab
), align
);
2176 * If the slab has been placed off-slab, and we have enough space then
2177 * move it on-slab. This is at the expense of any extra colouring.
2179 if (flags
& CFLGS_OFF_SLAB
&& left_over
>= slab_size
) {
2180 flags
&= ~CFLGS_OFF_SLAB
;
2181 left_over
-= slab_size
;
2184 if (flags
& CFLGS_OFF_SLAB
) {
2185 /* really off slab. No need for manual alignment */
2187 cachep
->num
* sizeof(kmem_bufctl_t
) + sizeof(struct slab
);
2190 cachep
->colour_off
= cache_line_size();
2191 /* Offset must be a multiple of the alignment. */
2192 if (cachep
->colour_off
< align
)
2193 cachep
->colour_off
= align
;
2194 cachep
->colour
= left_over
/ cachep
->colour_off
;
2195 cachep
->slab_size
= slab_size
;
2196 cachep
->flags
= flags
;
2197 cachep
->gfpflags
= 0;
2198 if (flags
& SLAB_CACHE_DMA
)
2199 cachep
->gfpflags
|= GFP_DMA
;
2200 cachep
->buffer_size
= size
;
2202 if (flags
& CFLGS_OFF_SLAB
)
2203 cachep
->slabp_cache
= kmem_find_general_cachep(slab_size
, 0u);
2204 cachep
->ctor
= ctor
;
2205 cachep
->dtor
= dtor
;
2206 cachep
->name
= name
;
2209 setup_cpu_cache(cachep
);
2211 /* cache setup completed, link it into the list */
2212 list_add(&cachep
->next
, &cache_chain
);
2214 if (!cachep
&& (flags
& SLAB_PANIC
))
2215 panic("kmem_cache_create(): failed to create slab `%s'\n",
2217 mutex_unlock(&cache_chain_mutex
);
2218 unlock_cpu_hotplug();
2221 EXPORT_SYMBOL(kmem_cache_create
);
2224 static void check_irq_off(void)
2226 BUG_ON(!irqs_disabled());
2229 static void check_irq_on(void)
2231 BUG_ON(irqs_disabled());
2234 static void check_spinlock_acquired(struct kmem_cache
*cachep
)
2238 assert_spin_locked(&cachep
->nodelists
[numa_node_id()]->list_lock
);
2242 static void check_spinlock_acquired_node(struct kmem_cache
*cachep
, int node
)
2246 assert_spin_locked(&cachep
->nodelists
[node
]->list_lock
);
2251 #define check_irq_off() do { } while(0)
2252 #define check_irq_on() do { } while(0)
2253 #define check_spinlock_acquired(x) do { } while(0)
2254 #define check_spinlock_acquired_node(x, y) do { } while(0)
2257 static void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
2258 struct array_cache
*ac
,
2259 int force
, int node
);
2261 static void do_drain(void *arg
)
2263 struct kmem_cache
*cachep
= arg
;
2264 struct array_cache
*ac
;
2265 int node
= numa_node_id();
2268 ac
= cpu_cache_get(cachep
);
2269 spin_lock(&cachep
->nodelists
[node
]->list_lock
);
2270 free_block(cachep
, ac
->entry
, ac
->avail
, node
);
2271 spin_unlock(&cachep
->nodelists
[node
]->list_lock
);
2275 static void drain_cpu_caches(struct kmem_cache
*cachep
)
2277 struct kmem_list3
*l3
;
2280 on_each_cpu(do_drain
, cachep
, 1, 1);
2282 for_each_online_node(node
) {
2283 l3
= cachep
->nodelists
[node
];
2284 if (l3
&& l3
->alien
)
2285 drain_alien_cache(cachep
, l3
->alien
);
2288 for_each_online_node(node
) {
2289 l3
= cachep
->nodelists
[node
];
2291 drain_array(cachep
, l3
, l3
->shared
, 1, node
);
2296 * Remove slabs from the list of free slabs.
2297 * Specify the number of slabs to drain in tofree.
2299 * Returns the actual number of slabs released.
2301 static int drain_freelist(struct kmem_cache
*cache
,
2302 struct kmem_list3
*l3
, int tofree
)
2304 struct list_head
*p
;
2309 while (nr_freed
< tofree
&& !list_empty(&l3
->slabs_free
)) {
2311 spin_lock_irq(&l3
->list_lock
);
2312 p
= l3
->slabs_free
.prev
;
2313 if (p
== &l3
->slabs_free
) {
2314 spin_unlock_irq(&l3
->list_lock
);
2318 slabp
= list_entry(p
, struct slab
, list
);
2320 BUG_ON(slabp
->inuse
);
2322 list_del(&slabp
->list
);
2324 * Safe to drop the lock. The slab is no longer linked
2327 l3
->free_objects
-= cache
->num
;
2328 spin_unlock_irq(&l3
->list_lock
);
2329 slab_destroy(cache
, slabp
);
2336 static int __cache_shrink(struct kmem_cache
*cachep
)
2339 struct kmem_list3
*l3
;
2341 drain_cpu_caches(cachep
);
2344 for_each_online_node(i
) {
2345 l3
= cachep
->nodelists
[i
];
2349 drain_freelist(cachep
, l3
, l3
->free_objects
);
2351 ret
+= !list_empty(&l3
->slabs_full
) ||
2352 !list_empty(&l3
->slabs_partial
);
2354 return (ret
? 1 : 0);
2358 * kmem_cache_shrink - Shrink a cache.
2359 * @cachep: The cache to shrink.
2361 * Releases as many slabs as possible for a cache.
2362 * To help debugging, a zero exit status indicates all slabs were released.
2364 int kmem_cache_shrink(struct kmem_cache
*cachep
)
2366 BUG_ON(!cachep
|| in_interrupt());
2368 return __cache_shrink(cachep
);
2370 EXPORT_SYMBOL(kmem_cache_shrink
);
2373 * kmem_cache_destroy - delete a cache
2374 * @cachep: the cache to destroy
2376 * Remove a struct kmem_cache object from the slab cache.
2377 * Returns 0 on success.
2379 * It is expected this function will be called by a module when it is
2380 * unloaded. This will remove the cache completely, and avoid a duplicate
2381 * cache being allocated each time a module is loaded and unloaded, if the
2382 * module doesn't have persistent in-kernel storage across loads and unloads.
2384 * The cache must be empty before calling this function.
2386 * The caller must guarantee that noone will allocate memory from the cache
2387 * during the kmem_cache_destroy().
2389 int kmem_cache_destroy(struct kmem_cache
*cachep
)
2392 struct kmem_list3
*l3
;
2394 BUG_ON(!cachep
|| in_interrupt());
2396 /* Don't let CPUs to come and go */
2399 /* Find the cache in the chain of caches. */
2400 mutex_lock(&cache_chain_mutex
);
2402 * the chain is never empty, cache_cache is never destroyed
2404 list_del(&cachep
->next
);
2405 mutex_unlock(&cache_chain_mutex
);
2407 if (__cache_shrink(cachep
)) {
2408 slab_error(cachep
, "Can't free all objects");
2409 mutex_lock(&cache_chain_mutex
);
2410 list_add(&cachep
->next
, &cache_chain
);
2411 mutex_unlock(&cache_chain_mutex
);
2412 unlock_cpu_hotplug();
2416 if (unlikely(cachep
->flags
& SLAB_DESTROY_BY_RCU
))
2419 for_each_online_cpu(i
)
2420 kfree(cachep
->array
[i
]);
2422 /* NUMA: free the list3 structures */
2423 for_each_online_node(i
) {
2424 l3
= cachep
->nodelists
[i
];
2427 free_alien_cache(l3
->alien
);
2431 kmem_cache_free(&cache_cache
, cachep
);
2432 unlock_cpu_hotplug();
2435 EXPORT_SYMBOL(kmem_cache_destroy
);
2437 /* Get the memory for a slab management obj. */
2438 static struct slab
*alloc_slabmgmt(struct kmem_cache
*cachep
, void *objp
,
2439 int colour_off
, gfp_t local_flags
,
2444 if (OFF_SLAB(cachep
)) {
2445 /* Slab management obj is off-slab. */
2446 slabp
= kmem_cache_alloc_node(cachep
->slabp_cache
,
2447 local_flags
, nodeid
);
2451 slabp
= objp
+ colour_off
;
2452 colour_off
+= cachep
->slab_size
;
2455 slabp
->colouroff
= colour_off
;
2456 slabp
->s_mem
= objp
+ colour_off
;
2457 slabp
->nodeid
= nodeid
;
2461 static inline kmem_bufctl_t
*slab_bufctl(struct slab
*slabp
)
2463 return (kmem_bufctl_t
*) (slabp
+ 1);
2466 static void cache_init_objs(struct kmem_cache
*cachep
,
2467 struct slab
*slabp
, unsigned long ctor_flags
)
2471 for (i
= 0; i
< cachep
->num
; i
++) {
2472 void *objp
= index_to_obj(cachep
, slabp
, i
);
2474 /* need to poison the objs? */
2475 if (cachep
->flags
& SLAB_POISON
)
2476 poison_obj(cachep
, objp
, POISON_FREE
);
2477 if (cachep
->flags
& SLAB_STORE_USER
)
2478 *dbg_userword(cachep
, objp
) = NULL
;
2480 if (cachep
->flags
& SLAB_RED_ZONE
) {
2481 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2482 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2485 * Constructors are not allowed to allocate memory from the same
2486 * cache which they are a constructor for. Otherwise, deadlock.
2487 * They must also be threaded.
2489 if (cachep
->ctor
&& !(cachep
->flags
& SLAB_POISON
))
2490 cachep
->ctor(objp
+ obj_offset(cachep
), cachep
,
2493 if (cachep
->flags
& SLAB_RED_ZONE
) {
2494 if (*dbg_redzone2(cachep
, objp
) != RED_INACTIVE
)
2495 slab_error(cachep
, "constructor overwrote the"
2496 " end of an object");
2497 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
)
2498 slab_error(cachep
, "constructor overwrote the"
2499 " start of an object");
2501 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 &&
2502 OFF_SLAB(cachep
) && cachep
->flags
& SLAB_POISON
)
2503 kernel_map_pages(virt_to_page(objp
),
2504 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2507 cachep
->ctor(objp
, cachep
, ctor_flags
);
2509 slab_bufctl(slabp
)[i
] = i
+ 1;
2511 slab_bufctl(slabp
)[i
- 1] = BUFCTL_END
;
2515 static void kmem_flagcheck(struct kmem_cache
*cachep
, gfp_t flags
)
2517 if (flags
& SLAB_DMA
)
2518 BUG_ON(!(cachep
->gfpflags
& GFP_DMA
));
2520 BUG_ON(cachep
->gfpflags
& GFP_DMA
);
2523 static void *slab_get_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2526 void *objp
= index_to_obj(cachep
, slabp
, slabp
->free
);
2530 next
= slab_bufctl(slabp
)[slabp
->free
];
2532 slab_bufctl(slabp
)[slabp
->free
] = BUFCTL_FREE
;
2533 WARN_ON(slabp
->nodeid
!= nodeid
);
2540 static void slab_put_obj(struct kmem_cache
*cachep
, struct slab
*slabp
,
2541 void *objp
, int nodeid
)
2543 unsigned int objnr
= obj_to_index(cachep
, slabp
, objp
);
2546 /* Verify that the slab belongs to the intended node */
2547 WARN_ON(slabp
->nodeid
!= nodeid
);
2549 if (slab_bufctl(slabp
)[objnr
] + 1 <= SLAB_LIMIT
+ 1) {
2550 printk(KERN_ERR
"slab: double free detected in cache "
2551 "'%s', objp %p\n", cachep
->name
, objp
);
2555 slab_bufctl(slabp
)[objnr
] = slabp
->free
;
2556 slabp
->free
= objnr
;
2561 * Map pages beginning at addr to the given cache and slab. This is required
2562 * for the slab allocator to be able to lookup the cache and slab of a
2563 * virtual address for kfree, ksize, kmem_ptr_validate, and slab debugging.
2565 static void slab_map_pages(struct kmem_cache
*cache
, struct slab
*slab
,
2571 page
= virt_to_page(addr
);
2574 if (likely(!PageCompound(page
)))
2575 nr_pages
<<= cache
->gfporder
;
2578 page_set_cache(page
, cache
);
2579 page_set_slab(page
, slab
);
2581 } while (--nr_pages
);
2585 * Grow (by 1) the number of slabs within a cache. This is called by
2586 * kmem_cache_alloc() when there are no active objs left in a cache.
2588 static int cache_grow(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
2594 unsigned long ctor_flags
;
2595 struct kmem_list3
*l3
;
2598 * Be lazy and only check for valid flags here, keeping it out of the
2599 * critical path in kmem_cache_alloc().
2601 BUG_ON(flags
& ~(SLAB_DMA
| SLAB_LEVEL_MASK
| SLAB_NO_GROW
));
2602 if (flags
& SLAB_NO_GROW
)
2605 ctor_flags
= SLAB_CTOR_CONSTRUCTOR
;
2606 local_flags
= (flags
& SLAB_LEVEL_MASK
);
2607 if (!(local_flags
& __GFP_WAIT
))
2609 * Not allowed to sleep. Need to tell a constructor about
2610 * this - it might need to know...
2612 ctor_flags
|= SLAB_CTOR_ATOMIC
;
2614 /* Take the l3 list lock to change the colour_next on this node */
2616 l3
= cachep
->nodelists
[nodeid
];
2617 spin_lock(&l3
->list_lock
);
2619 /* Get colour for the slab, and cal the next value. */
2620 offset
= l3
->colour_next
;
2622 if (l3
->colour_next
>= cachep
->colour
)
2623 l3
->colour_next
= 0;
2624 spin_unlock(&l3
->list_lock
);
2626 offset
*= cachep
->colour_off
;
2628 if (local_flags
& __GFP_WAIT
)
2632 * The test for missing atomic flag is performed here, rather than
2633 * the more obvious place, simply to reduce the critical path length
2634 * in kmem_cache_alloc(). If a caller is seriously mis-behaving they
2635 * will eventually be caught here (where it matters).
2637 kmem_flagcheck(cachep
, flags
);
2640 * Get mem for the objs. Attempt to allocate a physical page from
2643 objp
= kmem_getpages(cachep
, flags
, nodeid
);
2647 /* Get slab management. */
2648 slabp
= alloc_slabmgmt(cachep
, objp
, offset
, local_flags
, nodeid
);
2652 slabp
->nodeid
= nodeid
;
2653 slab_map_pages(cachep
, slabp
, objp
);
2655 cache_init_objs(cachep
, slabp
, ctor_flags
);
2657 if (local_flags
& __GFP_WAIT
)
2658 local_irq_disable();
2660 spin_lock(&l3
->list_lock
);
2662 /* Make slab active. */
2663 list_add_tail(&slabp
->list
, &(l3
->slabs_free
));
2664 STATS_INC_GROWN(cachep
);
2665 l3
->free_objects
+= cachep
->num
;
2666 spin_unlock(&l3
->list_lock
);
2669 kmem_freepages(cachep
, objp
);
2671 if (local_flags
& __GFP_WAIT
)
2672 local_irq_disable();
2679 * Perform extra freeing checks:
2680 * - detect bad pointers.
2681 * - POISON/RED_ZONE checking
2682 * - destructor calls, for caches with POISON+dtor
2684 static void kfree_debugcheck(const void *objp
)
2688 if (!virt_addr_valid(objp
)) {
2689 printk(KERN_ERR
"kfree_debugcheck: out of range ptr %lxh.\n",
2690 (unsigned long)objp
);
2693 page
= virt_to_page(objp
);
2694 if (!PageSlab(page
)) {
2695 printk(KERN_ERR
"kfree_debugcheck: bad ptr %lxh.\n",
2696 (unsigned long)objp
);
2701 static inline void verify_redzone_free(struct kmem_cache
*cache
, void *obj
)
2703 unsigned long redzone1
, redzone2
;
2705 redzone1
= *dbg_redzone1(cache
, obj
);
2706 redzone2
= *dbg_redzone2(cache
, obj
);
2711 if (redzone1
== RED_ACTIVE
&& redzone2
== RED_ACTIVE
)
2714 if (redzone1
== RED_INACTIVE
&& redzone2
== RED_INACTIVE
)
2715 slab_error(cache
, "double free detected");
2717 slab_error(cache
, "memory outside object was overwritten");
2719 printk(KERN_ERR
"%p: redzone 1:0x%lx, redzone 2:0x%lx.\n",
2720 obj
, redzone1
, redzone2
);
2723 static void *cache_free_debugcheck(struct kmem_cache
*cachep
, void *objp
,
2730 objp
-= obj_offset(cachep
);
2731 kfree_debugcheck(objp
);
2732 page
= virt_to_page(objp
);
2734 slabp
= page_get_slab(page
);
2736 if (cachep
->flags
& SLAB_RED_ZONE
) {
2737 verify_redzone_free(cachep
, objp
);
2738 *dbg_redzone1(cachep
, objp
) = RED_INACTIVE
;
2739 *dbg_redzone2(cachep
, objp
) = RED_INACTIVE
;
2741 if (cachep
->flags
& SLAB_STORE_USER
)
2742 *dbg_userword(cachep
, objp
) = caller
;
2744 objnr
= obj_to_index(cachep
, slabp
, objp
);
2746 BUG_ON(objnr
>= cachep
->num
);
2747 BUG_ON(objp
!= index_to_obj(cachep
, slabp
, objnr
));
2749 if (cachep
->flags
& SLAB_DEBUG_INITIAL
) {
2751 * Need to call the slab's constructor so the caller can
2752 * perform a verify of its state (debugging). Called without
2753 * the cache-lock held.
2755 cachep
->ctor(objp
+ obj_offset(cachep
),
2756 cachep
, SLAB_CTOR_CONSTRUCTOR
| SLAB_CTOR_VERIFY
);
2758 if (cachep
->flags
& SLAB_POISON
&& cachep
->dtor
) {
2759 /* we want to cache poison the object,
2760 * call the destruction callback
2762 cachep
->dtor(objp
+ obj_offset(cachep
), cachep
, 0);
2764 #ifdef CONFIG_DEBUG_SLAB_LEAK
2765 slab_bufctl(slabp
)[objnr
] = BUFCTL_FREE
;
2767 if (cachep
->flags
& SLAB_POISON
) {
2768 #ifdef CONFIG_DEBUG_PAGEALLOC
2769 if ((cachep
->buffer_size
% PAGE_SIZE
)==0 && OFF_SLAB(cachep
)) {
2770 store_stackinfo(cachep
, objp
, (unsigned long)caller
);
2771 kernel_map_pages(virt_to_page(objp
),
2772 cachep
->buffer_size
/ PAGE_SIZE
, 0);
2774 poison_obj(cachep
, objp
, POISON_FREE
);
2777 poison_obj(cachep
, objp
, POISON_FREE
);
2783 static void check_slabp(struct kmem_cache
*cachep
, struct slab
*slabp
)
2788 /* Check slab's freelist to see if this obj is there. */
2789 for (i
= slabp
->free
; i
!= BUFCTL_END
; i
= slab_bufctl(slabp
)[i
]) {
2791 if (entries
> cachep
->num
|| i
>= cachep
->num
)
2794 if (entries
!= cachep
->num
- slabp
->inuse
) {
2796 printk(KERN_ERR
"slab: Internal list corruption detected in "
2797 "cache '%s'(%d), slabp %p(%d). Hexdump:\n",
2798 cachep
->name
, cachep
->num
, slabp
, slabp
->inuse
);
2800 i
< sizeof(*slabp
) + cachep
->num
* sizeof(kmem_bufctl_t
);
2803 printk("\n%03x:", i
);
2804 printk(" %02x", ((unsigned char *)slabp
)[i
]);
2811 #define kfree_debugcheck(x) do { } while(0)
2812 #define cache_free_debugcheck(x,objp,z) (objp)
2813 #define check_slabp(x,y) do { } while(0)
2816 static void *cache_alloc_refill(struct kmem_cache
*cachep
, gfp_t flags
)
2819 struct kmem_list3
*l3
;
2820 struct array_cache
*ac
;
2823 ac
= cpu_cache_get(cachep
);
2825 batchcount
= ac
->batchcount
;
2826 if (!ac
->touched
&& batchcount
> BATCHREFILL_LIMIT
) {
2828 * If there was little recent activity on this cache, then
2829 * perform only a partial refill. Otherwise we could generate
2832 batchcount
= BATCHREFILL_LIMIT
;
2834 l3
= cachep
->nodelists
[numa_node_id()];
2836 BUG_ON(ac
->avail
> 0 || !l3
);
2837 spin_lock(&l3
->list_lock
);
2839 /* See if we can refill from the shared array */
2840 if (l3
->shared
&& transfer_objects(ac
, l3
->shared
, batchcount
))
2843 while (batchcount
> 0) {
2844 struct list_head
*entry
;
2846 /* Get slab alloc is to come from. */
2847 entry
= l3
->slabs_partial
.next
;
2848 if (entry
== &l3
->slabs_partial
) {
2849 l3
->free_touched
= 1;
2850 entry
= l3
->slabs_free
.next
;
2851 if (entry
== &l3
->slabs_free
)
2855 slabp
= list_entry(entry
, struct slab
, list
);
2856 check_slabp(cachep
, slabp
);
2857 check_spinlock_acquired(cachep
);
2858 while (slabp
->inuse
< cachep
->num
&& batchcount
--) {
2859 STATS_INC_ALLOCED(cachep
);
2860 STATS_INC_ACTIVE(cachep
);
2861 STATS_SET_HIGH(cachep
);
2863 ac
->entry
[ac
->avail
++] = slab_get_obj(cachep
, slabp
,
2866 check_slabp(cachep
, slabp
);
2868 /* move slabp to correct slabp list: */
2869 list_del(&slabp
->list
);
2870 if (slabp
->free
== BUFCTL_END
)
2871 list_add(&slabp
->list
, &l3
->slabs_full
);
2873 list_add(&slabp
->list
, &l3
->slabs_partial
);
2877 l3
->free_objects
-= ac
->avail
;
2879 spin_unlock(&l3
->list_lock
);
2881 if (unlikely(!ac
->avail
)) {
2883 x
= cache_grow(cachep
, flags
, numa_node_id());
2885 /* cache_grow can reenable interrupts, then ac could change. */
2886 ac
= cpu_cache_get(cachep
);
2887 if (!x
&& ac
->avail
== 0) /* no objects in sight? abort */
2890 if (!ac
->avail
) /* objects refilled by interrupt? */
2894 return ac
->entry
[--ac
->avail
];
2897 static inline void cache_alloc_debugcheck_before(struct kmem_cache
*cachep
,
2900 might_sleep_if(flags
& __GFP_WAIT
);
2902 kmem_flagcheck(cachep
, flags
);
2907 static void *cache_alloc_debugcheck_after(struct kmem_cache
*cachep
,
2908 gfp_t flags
, void *objp
, void *caller
)
2912 if (cachep
->flags
& SLAB_POISON
) {
2913 #ifdef CONFIG_DEBUG_PAGEALLOC
2914 if ((cachep
->buffer_size
% PAGE_SIZE
) == 0 && OFF_SLAB(cachep
))
2915 kernel_map_pages(virt_to_page(objp
),
2916 cachep
->buffer_size
/ PAGE_SIZE
, 1);
2918 check_poison_obj(cachep
, objp
);
2920 check_poison_obj(cachep
, objp
);
2922 poison_obj(cachep
, objp
, POISON_INUSE
);
2924 if (cachep
->flags
& SLAB_STORE_USER
)
2925 *dbg_userword(cachep
, objp
) = caller
;
2927 if (cachep
->flags
& SLAB_RED_ZONE
) {
2928 if (*dbg_redzone1(cachep
, objp
) != RED_INACTIVE
||
2929 *dbg_redzone2(cachep
, objp
) != RED_INACTIVE
) {
2930 slab_error(cachep
, "double free, or memory outside"
2931 " object was overwritten");
2933 "%p: redzone 1:0x%lx, redzone 2:0x%lx\n",
2934 objp
, *dbg_redzone1(cachep
, objp
),
2935 *dbg_redzone2(cachep
, objp
));
2937 *dbg_redzone1(cachep
, objp
) = RED_ACTIVE
;
2938 *dbg_redzone2(cachep
, objp
) = RED_ACTIVE
;
2940 #ifdef CONFIG_DEBUG_SLAB_LEAK
2945 slabp
= page_get_slab(virt_to_page(objp
));
2946 objnr
= (unsigned)(objp
- slabp
->s_mem
) / cachep
->buffer_size
;
2947 slab_bufctl(slabp
)[objnr
] = BUFCTL_ACTIVE
;
2950 objp
+= obj_offset(cachep
);
2951 if (cachep
->ctor
&& cachep
->flags
& SLAB_POISON
) {
2952 unsigned long ctor_flags
= SLAB_CTOR_CONSTRUCTOR
;
2954 if (!(flags
& __GFP_WAIT
))
2955 ctor_flags
|= SLAB_CTOR_ATOMIC
;
2957 cachep
->ctor(objp
, cachep
, ctor_flags
);
2962 #define cache_alloc_debugcheck_after(a,b,objp,d) (objp)
2965 static inline void *____cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
2968 struct array_cache
*ac
;
2971 if (unlikely(current
->flags
& (PF_SPREAD_SLAB
| PF_MEMPOLICY
))) {
2972 objp
= alternate_node_alloc(cachep
, flags
);
2979 ac
= cpu_cache_get(cachep
);
2980 if (likely(ac
->avail
)) {
2981 STATS_INC_ALLOCHIT(cachep
);
2983 objp
= ac
->entry
[--ac
->avail
];
2985 STATS_INC_ALLOCMISS(cachep
);
2986 objp
= cache_alloc_refill(cachep
, flags
);
2991 static __always_inline
void *__cache_alloc(struct kmem_cache
*cachep
,
2992 gfp_t flags
, void *caller
)
2994 unsigned long save_flags
;
2997 cache_alloc_debugcheck_before(cachep
, flags
);
2999 local_irq_save(save_flags
);
3000 objp
= ____cache_alloc(cachep
, flags
);
3001 local_irq_restore(save_flags
);
3002 objp
= cache_alloc_debugcheck_after(cachep
, flags
, objp
,
3010 * Try allocating on another node if PF_SPREAD_SLAB|PF_MEMPOLICY.
3012 * If we are in_interrupt, then process context, including cpusets and
3013 * mempolicy, may not apply and should not be used for allocation policy.
3015 static void *alternate_node_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3017 int nid_alloc
, nid_here
;
3021 nid_alloc
= nid_here
= numa_node_id();
3022 if (cpuset_do_slab_mem_spread() && (cachep
->flags
& SLAB_MEM_SPREAD
))
3023 nid_alloc
= cpuset_mem_spread_node();
3024 else if (current
->mempolicy
)
3025 nid_alloc
= slab_node(current
->mempolicy
);
3026 if (nid_alloc
!= nid_here
)
3027 return __cache_alloc_node(cachep
, flags
, nid_alloc
);
3032 * A interface to enable slab creation on nodeid
3034 static void *__cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
,
3037 struct list_head
*entry
;
3039 struct kmem_list3
*l3
;
3043 l3
= cachep
->nodelists
[nodeid
];
3048 spin_lock(&l3
->list_lock
);
3049 entry
= l3
->slabs_partial
.next
;
3050 if (entry
== &l3
->slabs_partial
) {
3051 l3
->free_touched
= 1;
3052 entry
= l3
->slabs_free
.next
;
3053 if (entry
== &l3
->slabs_free
)
3057 slabp
= list_entry(entry
, struct slab
, list
);
3058 check_spinlock_acquired_node(cachep
, nodeid
);
3059 check_slabp(cachep
, slabp
);
3061 STATS_INC_NODEALLOCS(cachep
);
3062 STATS_INC_ACTIVE(cachep
);
3063 STATS_SET_HIGH(cachep
);
3065 BUG_ON(slabp
->inuse
== cachep
->num
);
3067 obj
= slab_get_obj(cachep
, slabp
, nodeid
);
3068 check_slabp(cachep
, slabp
);
3070 /* move slabp to correct slabp list: */
3071 list_del(&slabp
->list
);
3073 if (slabp
->free
== BUFCTL_END
)
3074 list_add(&slabp
->list
, &l3
->slabs_full
);
3076 list_add(&slabp
->list
, &l3
->slabs_partial
);
3078 spin_unlock(&l3
->list_lock
);
3082 spin_unlock(&l3
->list_lock
);
3083 x
= cache_grow(cachep
, flags
, nodeid
);
3095 * Caller needs to acquire correct kmem_list's list_lock
3097 static void free_block(struct kmem_cache
*cachep
, void **objpp
, int nr_objects
,
3101 struct kmem_list3
*l3
;
3103 for (i
= 0; i
< nr_objects
; i
++) {
3104 void *objp
= objpp
[i
];
3107 slabp
= virt_to_slab(objp
);
3108 l3
= cachep
->nodelists
[node
];
3109 list_del(&slabp
->list
);
3110 check_spinlock_acquired_node(cachep
, node
);
3111 check_slabp(cachep
, slabp
);
3112 slab_put_obj(cachep
, slabp
, objp
, node
);
3113 STATS_DEC_ACTIVE(cachep
);
3115 check_slabp(cachep
, slabp
);
3117 /* fixup slab chains */
3118 if (slabp
->inuse
== 0) {
3119 if (l3
->free_objects
> l3
->free_limit
) {
3120 l3
->free_objects
-= cachep
->num
;
3121 slab_destroy(cachep
, slabp
);
3123 list_add(&slabp
->list
, &l3
->slabs_free
);
3126 /* Unconditionally move a slab to the end of the
3127 * partial list on free - maximum time for the
3128 * other objects to be freed, too.
3130 list_add_tail(&slabp
->list
, &l3
->slabs_partial
);
3135 static void cache_flusharray(struct kmem_cache
*cachep
, struct array_cache
*ac
)
3138 struct kmem_list3
*l3
;
3139 int node
= numa_node_id();
3141 batchcount
= ac
->batchcount
;
3143 BUG_ON(!batchcount
|| batchcount
> ac
->avail
);
3146 l3
= cachep
->nodelists
[node
];
3147 spin_lock(&l3
->list_lock
);
3149 struct array_cache
*shared_array
= l3
->shared
;
3150 int max
= shared_array
->limit
- shared_array
->avail
;
3152 if (batchcount
> max
)
3154 memcpy(&(shared_array
->entry
[shared_array
->avail
]),
3155 ac
->entry
, sizeof(void *) * batchcount
);
3156 shared_array
->avail
+= batchcount
;
3161 free_block(cachep
, ac
->entry
, batchcount
, node
);
3166 struct list_head
*p
;
3168 p
= l3
->slabs_free
.next
;
3169 while (p
!= &(l3
->slabs_free
)) {
3172 slabp
= list_entry(p
, struct slab
, list
);
3173 BUG_ON(slabp
->inuse
);
3178 STATS_SET_FREEABLE(cachep
, i
);
3181 spin_unlock(&l3
->list_lock
);
3182 ac
->avail
-= batchcount
;
3183 memmove(ac
->entry
, &(ac
->entry
[batchcount
]), sizeof(void *)*ac
->avail
);
3187 * Release an obj back to its cache. If the obj has a constructed state, it must
3188 * be in this state _before_ it is released. Called with disabled ints.
3190 static inline void __cache_free(struct kmem_cache
*cachep
, void *objp
)
3192 struct array_cache
*ac
= cpu_cache_get(cachep
);
3195 objp
= cache_free_debugcheck(cachep
, objp
, __builtin_return_address(0));
3197 if (cache_free_alien(cachep
, objp
))
3200 if (likely(ac
->avail
< ac
->limit
)) {
3201 STATS_INC_FREEHIT(cachep
);
3202 ac
->entry
[ac
->avail
++] = objp
;
3205 STATS_INC_FREEMISS(cachep
);
3206 cache_flusharray(cachep
, ac
);
3207 ac
->entry
[ac
->avail
++] = objp
;
3212 * kmem_cache_alloc - Allocate an object
3213 * @cachep: The cache to allocate from.
3214 * @flags: See kmalloc().
3216 * Allocate an object from this cache. The flags are only relevant
3217 * if the cache has no available objects.
3219 void *kmem_cache_alloc(struct kmem_cache
*cachep
, gfp_t flags
)
3221 return __cache_alloc(cachep
, flags
, __builtin_return_address(0));
3223 EXPORT_SYMBOL(kmem_cache_alloc
);
3226 * kmem_cache_zalloc - Allocate an object. The memory is set to zero.
3227 * @cache: The cache to allocate from.
3228 * @flags: See kmalloc().
3230 * Allocate an object from this cache and set the allocated memory to zero.
3231 * The flags are only relevant if the cache has no available objects.
3233 void *kmem_cache_zalloc(struct kmem_cache
*cache
, gfp_t flags
)
3235 void *ret
= __cache_alloc(cache
, flags
, __builtin_return_address(0));
3237 memset(ret
, 0, obj_size(cache
));
3240 EXPORT_SYMBOL(kmem_cache_zalloc
);
3243 * kmem_ptr_validate - check if an untrusted pointer might
3245 * @cachep: the cache we're checking against
3246 * @ptr: pointer to validate
3248 * This verifies that the untrusted pointer looks sane:
3249 * it is _not_ a guarantee that the pointer is actually
3250 * part of the slab cache in question, but it at least
3251 * validates that the pointer can be dereferenced and
3252 * looks half-way sane.
3254 * Currently only used for dentry validation.
3256 int fastcall
kmem_ptr_validate(struct kmem_cache
*cachep
, void *ptr
)
3258 unsigned long addr
= (unsigned long)ptr
;
3259 unsigned long min_addr
= PAGE_OFFSET
;
3260 unsigned long align_mask
= BYTES_PER_WORD
- 1;
3261 unsigned long size
= cachep
->buffer_size
;
3264 if (unlikely(addr
< min_addr
))
3266 if (unlikely(addr
> (unsigned long)high_memory
- size
))
3268 if (unlikely(addr
& align_mask
))
3270 if (unlikely(!kern_addr_valid(addr
)))
3272 if (unlikely(!kern_addr_valid(addr
+ size
- 1)))
3274 page
= virt_to_page(ptr
);
3275 if (unlikely(!PageSlab(page
)))
3277 if (unlikely(page_get_cache(page
) != cachep
))
3286 * kmem_cache_alloc_node - Allocate an object on the specified node
3287 * @cachep: The cache to allocate from.
3288 * @flags: See kmalloc().
3289 * @nodeid: node number of the target node.
3291 * Identical to kmem_cache_alloc, except that this function is slow
3292 * and can sleep. And it will allocate memory on the given node, which
3293 * can improve the performance for cpu bound structures.
3294 * New and improved: it will now make sure that the object gets
3295 * put on the correct node list so that there is no false sharing.
3297 void *kmem_cache_alloc_node(struct kmem_cache
*cachep
, gfp_t flags
, int nodeid
)
3299 unsigned long save_flags
;
3302 cache_alloc_debugcheck_before(cachep
, flags
);
3303 local_irq_save(save_flags
);
3305 if (nodeid
== -1 || nodeid
== numa_node_id() ||
3306 !cachep
->nodelists
[nodeid
])
3307 ptr
= ____cache_alloc(cachep
, flags
);
3309 ptr
= __cache_alloc_node(cachep
, flags
, nodeid
);
3310 local_irq_restore(save_flags
);
3312 ptr
= cache_alloc_debugcheck_after(cachep
, flags
, ptr
,
3313 __builtin_return_address(0));
3317 EXPORT_SYMBOL(kmem_cache_alloc_node
);
3319 void *kmalloc_node(size_t size
, gfp_t flags
, int node
)
3321 struct kmem_cache
*cachep
;
3323 cachep
= kmem_find_general_cachep(size
, flags
);
3324 if (unlikely(cachep
== NULL
))
3326 return kmem_cache_alloc_node(cachep
, flags
, node
);
3328 EXPORT_SYMBOL(kmalloc_node
);
3332 * __do_kmalloc - allocate memory
3333 * @size: how many bytes of memory are required.
3334 * @flags: the type of memory to allocate (see kmalloc).
3335 * @caller: function caller for debug tracking of the caller
3337 static __always_inline
void *__do_kmalloc(size_t size
, gfp_t flags
,
3340 struct kmem_cache
*cachep
;
3342 /* If you want to save a few bytes .text space: replace
3344 * Then kmalloc uses the uninlined functions instead of the inline
3347 cachep
= __find_general_cachep(size
, flags
);
3348 if (unlikely(cachep
== NULL
))
3350 return __cache_alloc(cachep
, flags
, caller
);
3354 void *__kmalloc(size_t size
, gfp_t flags
)
3356 #ifndef CONFIG_DEBUG_SLAB
3357 return __do_kmalloc(size
, flags
, NULL
);
3359 return __do_kmalloc(size
, flags
, __builtin_return_address(0));
3362 EXPORT_SYMBOL(__kmalloc
);
3364 #ifdef CONFIG_DEBUG_SLAB
3365 void *__kmalloc_track_caller(size_t size
, gfp_t flags
, void *caller
)
3367 return __do_kmalloc(size
, flags
, caller
);
3369 EXPORT_SYMBOL(__kmalloc_track_caller
);
3374 * percpu_depopulate - depopulate per-cpu data for given cpu
3375 * @__pdata: per-cpu data to depopulate
3376 * @cpu: depopulate per-cpu data for this cpu
3378 * Depopulating per-cpu data for a cpu going offline would be a typical
3379 * use case. You need to register a cpu hotplug handler for that purpose.
3381 void percpu_depopulate(void *__pdata
, int cpu
)
3383 struct percpu_data
*pdata
= __percpu_disguise(__pdata
);
3384 if (pdata
->ptrs
[cpu
]) {
3385 kfree(pdata
->ptrs
[cpu
]);
3386 pdata
->ptrs
[cpu
] = NULL
;
3389 EXPORT_SYMBOL_GPL(percpu_depopulate
);
3392 * percpu_depopulate_mask - depopulate per-cpu data for some cpu's
3393 * @__pdata: per-cpu data to depopulate
3394 * @mask: depopulate per-cpu data for cpu's selected through mask bits
3396 void __percpu_depopulate_mask(void *__pdata
, cpumask_t
*mask
)
3399 for_each_cpu_mask(cpu
, *mask
)
3400 percpu_depopulate(__pdata
, cpu
);
3402 EXPORT_SYMBOL_GPL(__percpu_depopulate_mask
);
3405 * percpu_populate - populate per-cpu data for given cpu
3406 * @__pdata: per-cpu data to populate further
3407 * @size: size of per-cpu object
3408 * @gfp: may sleep or not etc.
3409 * @cpu: populate per-data for this cpu
3411 * Populating per-cpu data for a cpu coming online would be a typical
3412 * use case. You need to register a cpu hotplug handler for that purpose.
3413 * Per-cpu object is populated with zeroed buffer.
3415 void *percpu_populate(void *__pdata
, size_t size
, gfp_t gfp
, int cpu
)
3417 struct percpu_data
*pdata
= __percpu_disguise(__pdata
);
3418 int node
= cpu_to_node(cpu
);
3420 BUG_ON(pdata
->ptrs
[cpu
]);
3421 if (node_online(node
)) {
3422 /* FIXME: kzalloc_node(size, gfp, node) */
3423 pdata
->ptrs
[cpu
] = kmalloc_node(size
, gfp
, node
);
3424 if (pdata
->ptrs
[cpu
])
3425 memset(pdata
->ptrs
[cpu
], 0, size
);
3427 pdata
->ptrs
[cpu
] = kzalloc(size
, gfp
);
3428 return pdata
->ptrs
[cpu
];
3430 EXPORT_SYMBOL_GPL(percpu_populate
);
3433 * percpu_populate_mask - populate per-cpu data for more cpu's
3434 * @__pdata: per-cpu data to populate further
3435 * @size: size of per-cpu object
3436 * @gfp: may sleep or not etc.
3437 * @mask: populate per-cpu data for cpu's selected through mask bits
3439 * Per-cpu objects are populated with zeroed buffers.
3441 int __percpu_populate_mask(void *__pdata
, size_t size
, gfp_t gfp
,
3444 cpumask_t populated
= CPU_MASK_NONE
;
3447 for_each_cpu_mask(cpu
, *mask
)
3448 if (unlikely(!percpu_populate(__pdata
, size
, gfp
, cpu
))) {
3449 __percpu_depopulate_mask(__pdata
, &populated
);
3452 cpu_set(cpu
, populated
);
3455 EXPORT_SYMBOL_GPL(__percpu_populate_mask
);
3458 * percpu_alloc_mask - initial setup of per-cpu data
3459 * @size: size of per-cpu object
3460 * @gfp: may sleep or not etc.
3461 * @mask: populate per-data for cpu's selected through mask bits
3463 * Populating per-cpu data for all online cpu's would be a typical use case,
3464 * which is simplified by the percpu_alloc() wrapper.
3465 * Per-cpu objects are populated with zeroed buffers.
3467 void *__percpu_alloc_mask(size_t size
, gfp_t gfp
, cpumask_t
*mask
)
3469 void *pdata
= kzalloc(sizeof(struct percpu_data
), gfp
);
3470 void *__pdata
= __percpu_disguise(pdata
);
3472 if (unlikely(!pdata
))
3474 if (likely(!__percpu_populate_mask(__pdata
, size
, gfp
, mask
)))
3479 EXPORT_SYMBOL_GPL(__percpu_alloc_mask
);
3482 * percpu_free - final cleanup of per-cpu data
3483 * @__pdata: object to clean up
3485 * We simply clean up any per-cpu object left. No need for the client to
3486 * track and specify through a bis mask which per-cpu objects are to free.
3488 void percpu_free(void *__pdata
)
3490 __percpu_depopulate_mask(__pdata
, &cpu_possible_map
);
3491 kfree(__percpu_disguise(__pdata
));
3493 EXPORT_SYMBOL_GPL(percpu_free
);
3494 #endif /* CONFIG_SMP */
3497 * kmem_cache_free - Deallocate an object
3498 * @cachep: The cache the allocation was from.
3499 * @objp: The previously allocated object.
3501 * Free an object which was previously allocated from this
3504 void kmem_cache_free(struct kmem_cache
*cachep
, void *objp
)
3506 unsigned long flags
;
3508 BUG_ON(virt_to_cache(objp
) != cachep
);
3510 local_irq_save(flags
);
3511 __cache_free(cachep
, objp
);
3512 local_irq_restore(flags
);
3514 EXPORT_SYMBOL(kmem_cache_free
);
3517 * kfree - free previously allocated memory
3518 * @objp: pointer returned by kmalloc.
3520 * If @objp is NULL, no operation is performed.
3522 * Don't free memory not originally allocated by kmalloc()
3523 * or you will run into trouble.
3525 void kfree(const void *objp
)
3527 struct kmem_cache
*c
;
3528 unsigned long flags
;
3530 if (unlikely(!objp
))
3532 local_irq_save(flags
);
3533 kfree_debugcheck(objp
);
3534 c
= virt_to_cache(objp
);
3535 debug_check_no_locks_freed(objp
, obj_size(c
));
3536 __cache_free(c
, (void *)objp
);
3537 local_irq_restore(flags
);
3539 EXPORT_SYMBOL(kfree
);
3541 unsigned int kmem_cache_size(struct kmem_cache
*cachep
)
3543 return obj_size(cachep
);
3545 EXPORT_SYMBOL(kmem_cache_size
);
3547 const char *kmem_cache_name(struct kmem_cache
*cachep
)
3549 return cachep
->name
;
3551 EXPORT_SYMBOL_GPL(kmem_cache_name
);
3554 * This initializes kmem_list3 or resizes varioius caches for all nodes.
3556 static int alloc_kmemlist(struct kmem_cache
*cachep
)
3559 struct kmem_list3
*l3
;
3560 struct array_cache
*new_shared
;
3561 struct array_cache
**new_alien
;
3563 for_each_online_node(node
) {
3565 new_alien
= alloc_alien_cache(node
, cachep
->limit
);
3569 new_shared
= alloc_arraycache(node
,
3570 cachep
->shared
*cachep
->batchcount
,
3573 free_alien_cache(new_alien
);
3577 l3
= cachep
->nodelists
[node
];
3579 struct array_cache
*shared
= l3
->shared
;
3581 spin_lock_irq(&l3
->list_lock
);
3584 free_block(cachep
, shared
->entry
,
3585 shared
->avail
, node
);
3587 l3
->shared
= new_shared
;
3589 l3
->alien
= new_alien
;
3592 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3593 cachep
->batchcount
+ cachep
->num
;
3594 spin_unlock_irq(&l3
->list_lock
);
3596 free_alien_cache(new_alien
);
3599 l3
= kmalloc_node(sizeof(struct kmem_list3
), GFP_KERNEL
, node
);
3601 free_alien_cache(new_alien
);
3606 kmem_list3_init(l3
);
3607 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
+
3608 ((unsigned long)cachep
) % REAPTIMEOUT_LIST3
;
3609 l3
->shared
= new_shared
;
3610 l3
->alien
= new_alien
;
3611 l3
->free_limit
= (1 + nr_cpus_node(node
)) *
3612 cachep
->batchcount
+ cachep
->num
;
3613 cachep
->nodelists
[node
] = l3
;
3618 if (!cachep
->next
.next
) {
3619 /* Cache is not active yet. Roll back what we did */
3622 if (cachep
->nodelists
[node
]) {
3623 l3
= cachep
->nodelists
[node
];
3626 free_alien_cache(l3
->alien
);
3628 cachep
->nodelists
[node
] = NULL
;
3636 struct ccupdate_struct
{
3637 struct kmem_cache
*cachep
;
3638 struct array_cache
*new[NR_CPUS
];
3641 static void do_ccupdate_local(void *info
)
3643 struct ccupdate_struct
*new = info
;
3644 struct array_cache
*old
;
3647 old
= cpu_cache_get(new->cachep
);
3649 new->cachep
->array
[smp_processor_id()] = new->new[smp_processor_id()];
3650 new->new[smp_processor_id()] = old
;
3653 /* Always called with the cache_chain_mutex held */
3654 static int do_tune_cpucache(struct kmem_cache
*cachep
, int limit
,
3655 int batchcount
, int shared
)
3657 struct ccupdate_struct
new;
3660 memset(&new.new, 0, sizeof(new.new));
3661 for_each_online_cpu(i
) {
3662 new.new[i
] = alloc_arraycache(cpu_to_node(i
), limit
,
3665 for (i
--; i
>= 0; i
--)
3670 new.cachep
= cachep
;
3672 on_each_cpu(do_ccupdate_local
, (void *)&new, 1, 1);
3675 cachep
->batchcount
= batchcount
;
3676 cachep
->limit
= limit
;
3677 cachep
->shared
= shared
;
3679 for_each_online_cpu(i
) {
3680 struct array_cache
*ccold
= new.new[i
];
3683 spin_lock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
3684 free_block(cachep
, ccold
->entry
, ccold
->avail
, cpu_to_node(i
));
3685 spin_unlock_irq(&cachep
->nodelists
[cpu_to_node(i
)]->list_lock
);
3689 err
= alloc_kmemlist(cachep
);
3691 printk(KERN_ERR
"alloc_kmemlist failed for %s, error %d.\n",
3692 cachep
->name
, -err
);
3698 /* Called with cache_chain_mutex held always */
3699 static void enable_cpucache(struct kmem_cache
*cachep
)
3705 * The head array serves three purposes:
3706 * - create a LIFO ordering, i.e. return objects that are cache-warm
3707 * - reduce the number of spinlock operations.
3708 * - reduce the number of linked list operations on the slab and
3709 * bufctl chains: array operations are cheaper.
3710 * The numbers are guessed, we should auto-tune as described by
3713 if (cachep
->buffer_size
> 131072)
3715 else if (cachep
->buffer_size
> PAGE_SIZE
)
3717 else if (cachep
->buffer_size
> 1024)
3719 else if (cachep
->buffer_size
> 256)
3725 * CPU bound tasks (e.g. network routing) can exhibit cpu bound
3726 * allocation behaviour: Most allocs on one cpu, most free operations
3727 * on another cpu. For these cases, an efficient object passing between
3728 * cpus is necessary. This is provided by a shared array. The array
3729 * replaces Bonwick's magazine layer.
3730 * On uniprocessor, it's functionally equivalent (but less efficient)
3731 * to a larger limit. Thus disabled by default.
3735 if (cachep
->buffer_size
<= PAGE_SIZE
)
3741 * With debugging enabled, large batchcount lead to excessively long
3742 * periods with disabled local interrupts. Limit the batchcount
3747 err
= do_tune_cpucache(cachep
, limit
, (limit
+ 1) / 2, shared
);
3749 printk(KERN_ERR
"enable_cpucache failed for %s, error %d.\n",
3750 cachep
->name
, -err
);
3754 * Drain an array if it contains any elements taking the l3 lock only if
3755 * necessary. Note that the l3 listlock also protects the array_cache
3756 * if drain_array() is used on the shared array.
3758 void drain_array(struct kmem_cache
*cachep
, struct kmem_list3
*l3
,
3759 struct array_cache
*ac
, int force
, int node
)
3763 if (!ac
|| !ac
->avail
)
3765 if (ac
->touched
&& !force
) {
3768 spin_lock_irq(&l3
->list_lock
);
3770 tofree
= force
? ac
->avail
: (ac
->limit
+ 4) / 5;
3771 if (tofree
> ac
->avail
)
3772 tofree
= (ac
->avail
+ 1) / 2;
3773 free_block(cachep
, ac
->entry
, tofree
, node
);
3774 ac
->avail
-= tofree
;
3775 memmove(ac
->entry
, &(ac
->entry
[tofree
]),
3776 sizeof(void *) * ac
->avail
);
3778 spin_unlock_irq(&l3
->list_lock
);
3783 * cache_reap - Reclaim memory from caches.
3784 * @unused: unused parameter
3786 * Called from workqueue/eventd every few seconds.
3788 * - clear the per-cpu caches for this CPU.
3789 * - return freeable pages to the main free memory pool.
3791 * If we cannot acquire the cache chain mutex then just give up - we'll try
3792 * again on the next iteration.
3794 static void cache_reap(void *unused
)
3796 struct kmem_cache
*searchp
;
3797 struct kmem_list3
*l3
;
3798 int node
= numa_node_id();
3800 if (!mutex_trylock(&cache_chain_mutex
)) {
3801 /* Give up. Setup the next iteration. */
3802 schedule_delayed_work(&__get_cpu_var(reap_work
),
3807 list_for_each_entry(searchp
, &cache_chain
, next
) {
3811 * We only take the l3 lock if absolutely necessary and we
3812 * have established with reasonable certainty that
3813 * we can do some work if the lock was obtained.
3815 l3
= searchp
->nodelists
[node
];
3817 reap_alien(searchp
, l3
);
3819 drain_array(searchp
, l3
, cpu_cache_get(searchp
), 0, node
);
3822 * These are racy checks but it does not matter
3823 * if we skip one check or scan twice.
3825 if (time_after(l3
->next_reap
, jiffies
))
3828 l3
->next_reap
= jiffies
+ REAPTIMEOUT_LIST3
;
3830 drain_array(searchp
, l3
, l3
->shared
, 0, node
);
3832 if (l3
->free_touched
)
3833 l3
->free_touched
= 0;
3837 freed
= drain_freelist(searchp
, l3
, (l3
->free_limit
+
3838 5 * searchp
->num
- 1) / (5 * searchp
->num
));
3839 STATS_ADD_REAPED(searchp
, freed
);
3845 mutex_unlock(&cache_chain_mutex
);
3847 refresh_cpu_vm_stats(smp_processor_id());
3848 /* Set up the next iteration */
3849 schedule_delayed_work(&__get_cpu_var(reap_work
), REAPTIMEOUT_CPUC
);
3852 #ifdef CONFIG_PROC_FS
3854 static void print_slabinfo_header(struct seq_file
*m
)
3857 * Output format version, so at least we can change it
3858 * without _too_ many complaints.
3861 seq_puts(m
, "slabinfo - version: 2.1 (statistics)\n");
3863 seq_puts(m
, "slabinfo - version: 2.1\n");
3865 seq_puts(m
, "# name <active_objs> <num_objs> <objsize> "
3866 "<objperslab> <pagesperslab>");
3867 seq_puts(m
, " : tunables <limit> <batchcount> <sharedfactor>");
3868 seq_puts(m
, " : slabdata <active_slabs> <num_slabs> <sharedavail>");
3870 seq_puts(m
, " : globalstat <listallocs> <maxobjs> <grown> <reaped> "
3871 "<error> <maxfreeable> <nodeallocs> <remotefrees> <alienoverflow>");
3872 seq_puts(m
, " : cpustat <allochit> <allocmiss> <freehit> <freemiss>");
3877 static void *s_start(struct seq_file
*m
, loff_t
*pos
)
3880 struct list_head
*p
;
3882 mutex_lock(&cache_chain_mutex
);
3884 print_slabinfo_header(m
);
3885 p
= cache_chain
.next
;
3888 if (p
== &cache_chain
)
3891 return list_entry(p
, struct kmem_cache
, next
);
3894 static void *s_next(struct seq_file
*m
, void *p
, loff_t
*pos
)
3896 struct kmem_cache
*cachep
= p
;
3898 return cachep
->next
.next
== &cache_chain
?
3899 NULL
: list_entry(cachep
->next
.next
, struct kmem_cache
, next
);
3902 static void s_stop(struct seq_file
*m
, void *p
)
3904 mutex_unlock(&cache_chain_mutex
);
3907 static int s_show(struct seq_file
*m
, void *p
)
3909 struct kmem_cache
*cachep
= p
;
3911 unsigned long active_objs
;
3912 unsigned long num_objs
;
3913 unsigned long active_slabs
= 0;
3914 unsigned long num_slabs
, free_objects
= 0, shared_avail
= 0;
3918 struct kmem_list3
*l3
;
3922 for_each_online_node(node
) {
3923 l3
= cachep
->nodelists
[node
];
3928 spin_lock_irq(&l3
->list_lock
);
3930 list_for_each_entry(slabp
, &l3
->slabs_full
, list
) {
3931 if (slabp
->inuse
!= cachep
->num
&& !error
)
3932 error
= "slabs_full accounting error";
3933 active_objs
+= cachep
->num
;
3936 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
) {
3937 if (slabp
->inuse
== cachep
->num
&& !error
)
3938 error
= "slabs_partial inuse accounting error";
3939 if (!slabp
->inuse
&& !error
)
3940 error
= "slabs_partial/inuse accounting error";
3941 active_objs
+= slabp
->inuse
;
3944 list_for_each_entry(slabp
, &l3
->slabs_free
, list
) {
3945 if (slabp
->inuse
&& !error
)
3946 error
= "slabs_free/inuse accounting error";
3949 free_objects
+= l3
->free_objects
;
3951 shared_avail
+= l3
->shared
->avail
;
3953 spin_unlock_irq(&l3
->list_lock
);
3955 num_slabs
+= active_slabs
;
3956 num_objs
= num_slabs
* cachep
->num
;
3957 if (num_objs
- active_objs
!= free_objects
&& !error
)
3958 error
= "free_objects accounting error";
3960 name
= cachep
->name
;
3962 printk(KERN_ERR
"slab: cache %s error: %s\n", name
, error
);
3964 seq_printf(m
, "%-17s %6lu %6lu %6u %4u %4d",
3965 name
, active_objs
, num_objs
, cachep
->buffer_size
,
3966 cachep
->num
, (1 << cachep
->gfporder
));
3967 seq_printf(m
, " : tunables %4u %4u %4u",
3968 cachep
->limit
, cachep
->batchcount
, cachep
->shared
);
3969 seq_printf(m
, " : slabdata %6lu %6lu %6lu",
3970 active_slabs
, num_slabs
, shared_avail
);
3973 unsigned long high
= cachep
->high_mark
;
3974 unsigned long allocs
= cachep
->num_allocations
;
3975 unsigned long grown
= cachep
->grown
;
3976 unsigned long reaped
= cachep
->reaped
;
3977 unsigned long errors
= cachep
->errors
;
3978 unsigned long max_freeable
= cachep
->max_freeable
;
3979 unsigned long node_allocs
= cachep
->node_allocs
;
3980 unsigned long node_frees
= cachep
->node_frees
;
3981 unsigned long overflows
= cachep
->node_overflow
;
3983 seq_printf(m
, " : globalstat %7lu %6lu %5lu %4lu \
3984 %4lu %4lu %4lu %4lu %4lu", allocs
, high
, grown
,
3985 reaped
, errors
, max_freeable
, node_allocs
,
3986 node_frees
, overflows
);
3990 unsigned long allochit
= atomic_read(&cachep
->allochit
);
3991 unsigned long allocmiss
= atomic_read(&cachep
->allocmiss
);
3992 unsigned long freehit
= atomic_read(&cachep
->freehit
);
3993 unsigned long freemiss
= atomic_read(&cachep
->freemiss
);
3995 seq_printf(m
, " : cpustat %6lu %6lu %6lu %6lu",
3996 allochit
, allocmiss
, freehit
, freemiss
);
4004 * slabinfo_op - iterator that generates /proc/slabinfo
4013 * num-pages-per-slab
4014 * + further values on SMP and with statistics enabled
4017 struct seq_operations slabinfo_op
= {
4024 #define MAX_SLABINFO_WRITE 128
4026 * slabinfo_write - Tuning for the slab allocator
4028 * @buffer: user buffer
4029 * @count: data length
4032 ssize_t
slabinfo_write(struct file
*file
, const char __user
* buffer
,
4033 size_t count
, loff_t
*ppos
)
4035 char kbuf
[MAX_SLABINFO_WRITE
+ 1], *tmp
;
4036 int limit
, batchcount
, shared
, res
;
4037 struct kmem_cache
*cachep
;
4039 if (count
> MAX_SLABINFO_WRITE
)
4041 if (copy_from_user(&kbuf
, buffer
, count
))
4043 kbuf
[MAX_SLABINFO_WRITE
] = '\0';
4045 tmp
= strchr(kbuf
, ' ');
4050 if (sscanf(tmp
, " %d %d %d", &limit
, &batchcount
, &shared
) != 3)
4053 /* Find the cache in the chain of caches. */
4054 mutex_lock(&cache_chain_mutex
);
4056 list_for_each_entry(cachep
, &cache_chain
, next
) {
4057 if (!strcmp(cachep
->name
, kbuf
)) {
4058 if (limit
< 1 || batchcount
< 1 ||
4059 batchcount
> limit
|| shared
< 0) {
4062 res
= do_tune_cpucache(cachep
, limit
,
4063 batchcount
, shared
);
4068 mutex_unlock(&cache_chain_mutex
);
4074 #ifdef CONFIG_DEBUG_SLAB_LEAK
4076 static void *leaks_start(struct seq_file
*m
, loff_t
*pos
)
4079 struct list_head
*p
;
4081 mutex_lock(&cache_chain_mutex
);
4082 p
= cache_chain
.next
;
4085 if (p
== &cache_chain
)
4088 return list_entry(p
, struct kmem_cache
, next
);
4091 static inline int add_caller(unsigned long *n
, unsigned long v
)
4101 unsigned long *q
= p
+ 2 * i
;
4115 memmove(p
+ 2, p
, n
[1] * 2 * sizeof(unsigned long) - ((void *)p
- (void *)n
));
4121 static void handle_slab(unsigned long *n
, struct kmem_cache
*c
, struct slab
*s
)
4127 for (i
= 0, p
= s
->s_mem
; i
< c
->num
; i
++, p
+= c
->buffer_size
) {
4128 if (slab_bufctl(s
)[i
] != BUFCTL_ACTIVE
)
4130 if (!add_caller(n
, (unsigned long)*dbg_userword(c
, p
)))
4135 static void show_symbol(struct seq_file
*m
, unsigned long address
)
4137 #ifdef CONFIG_KALLSYMS
4140 unsigned long offset
, size
;
4141 char namebuf
[KSYM_NAME_LEN
+1];
4143 name
= kallsyms_lookup(address
, &size
, &offset
, &modname
, namebuf
);
4146 seq_printf(m
, "%s+%#lx/%#lx", name
, offset
, size
);
4148 seq_printf(m
, " [%s]", modname
);
4152 seq_printf(m
, "%p", (void *)address
);
4155 static int leaks_show(struct seq_file
*m
, void *p
)
4157 struct kmem_cache
*cachep
= p
;
4159 struct kmem_list3
*l3
;
4161 unsigned long *n
= m
->private;
4165 if (!(cachep
->flags
& SLAB_STORE_USER
))
4167 if (!(cachep
->flags
& SLAB_RED_ZONE
))
4170 /* OK, we can do it */
4174 for_each_online_node(node
) {
4175 l3
= cachep
->nodelists
[node
];
4180 spin_lock_irq(&l3
->list_lock
);
4182 list_for_each_entry(slabp
, &l3
->slabs_full
, list
)
4183 handle_slab(n
, cachep
, slabp
);
4184 list_for_each_entry(slabp
, &l3
->slabs_partial
, list
)
4185 handle_slab(n
, cachep
, slabp
);
4186 spin_unlock_irq(&l3
->list_lock
);
4188 name
= cachep
->name
;
4190 /* Increase the buffer size */
4191 mutex_unlock(&cache_chain_mutex
);
4192 m
->private = kzalloc(n
[0] * 4 * sizeof(unsigned long), GFP_KERNEL
);
4194 /* Too bad, we are really out */
4196 mutex_lock(&cache_chain_mutex
);
4199 *(unsigned long *)m
->private = n
[0] * 2;
4201 mutex_lock(&cache_chain_mutex
);
4202 /* Now make sure this entry will be retried */
4206 for (i
= 0; i
< n
[1]; i
++) {
4207 seq_printf(m
, "%s: %lu ", name
, n
[2*i
+3]);
4208 show_symbol(m
, n
[2*i
+2]);
4214 struct seq_operations slabstats_op
= {
4215 .start
= leaks_start
,
4224 * ksize - get the actual amount of memory allocated for a given object
4225 * @objp: Pointer to the object
4227 * kmalloc may internally round up allocations and return more memory
4228 * than requested. ksize() can be used to determine the actual amount of
4229 * memory allocated. The caller may use this additional memory, even though
4230 * a smaller amount of memory was initially specified with the kmalloc call.
4231 * The caller must guarantee that objp points to a valid object previously
4232 * allocated with either kmalloc() or kmem_cache_alloc(). The object
4233 * must not be freed during the duration of the call.
4235 unsigned int ksize(const void *objp
)
4237 if (unlikely(objp
== NULL
))
4240 return obj_size(virt_to_cache(objp
));