drivers/net/pch_gbe: Use DEFINE_PCI_DEVICE_TABLE
[linux-2.6/cjktty.git] / drivers / block / ub.c
blobc48e148785827677b900e961f84b5d52b01e5acb
1 /*
2 * The low performance USB storage driver (ub).
4 * Copyright (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
5 * Copyright (C) 2004 Pete Zaitcev (zaitcev@yahoo.com)
7 * This work is a part of Linux kernel, is derived from it,
8 * and is not licensed separately. See file COPYING for details.
10 * TODO (sorted by decreasing priority)
11 * -- Return sense now that rq allows it (we always auto-sense anyway).
12 * -- set readonly flag for CDs, set removable flag for CF readers
13 * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
14 * -- verify the 13 conditions and do bulk resets
15 * -- highmem
16 * -- move top_sense and work_bcs into separate allocations (if they survive)
17 * for cache purists and esoteric architectures.
18 * -- Allocate structure for LUN 0 before the first ub_sync_tur, avoid NULL. ?
19 * -- prune comments, they are too volumnous
20 * -- Resove XXX's
21 * -- CLEAR, CLR2STS, CLRRS seem to be ripe for refactoring.
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/usb_usual.h>
27 #include <linux/blkdev.h>
28 #include <linux/timer.h>
29 #include <linux/scatterlist.h>
30 #include <linux/slab.h>
31 #include <linux/smp_lock.h>
32 #include <scsi/scsi.h>
34 #define DRV_NAME "ub"
36 #define UB_MAJOR 180
39 * The command state machine is the key model for understanding of this driver.
41 * The general rule is that all transitions are done towards the bottom
42 * of the diagram, thus preventing any loops.
44 * An exception to that is how the STAT state is handled. A counter allows it
45 * to be re-entered along the path marked with [C].
47 * +--------+
48 * ! INIT !
49 * +--------+
50 * !
51 * ub_scsi_cmd_start fails ->--------------------------------------\
52 * ! !
53 * V !
54 * +--------+ !
55 * ! CMD ! !
56 * +--------+ !
57 * ! +--------+ !
58 * was -EPIPE -->-------------------------------->! CLEAR ! !
59 * ! +--------+ !
60 * ! ! !
61 * was error -->------------------------------------- ! --------->\
62 * ! ! !
63 * /--<-- cmd->dir == NONE ? ! !
64 * ! ! ! !
65 * ! V ! !
66 * ! +--------+ ! !
67 * ! ! DATA ! ! !
68 * ! +--------+ ! !
69 * ! ! +---------+ ! !
70 * ! was -EPIPE -->--------------->! CLR2STS ! ! !
71 * ! ! +---------+ ! !
72 * ! ! ! ! !
73 * ! ! was error -->---- ! --------->\
74 * ! was error -->--------------------- ! ------------- ! --------->\
75 * ! ! ! ! !
76 * ! V ! ! !
77 * \--->+--------+ ! ! !
78 * ! STAT !<--------------------------/ ! !
79 * /--->+--------+ ! !
80 * ! ! ! !
81 * [C] was -EPIPE -->-----------\ ! !
82 * ! ! ! ! !
83 * +<---- len == 0 ! ! !
84 * ! ! ! ! !
85 * ! was error -->--------------------------------------!---------->\
86 * ! ! ! ! !
87 * +<---- bad CSW ! ! !
88 * +<---- bad tag ! ! !
89 * ! ! V ! !
90 * ! ! +--------+ ! !
91 * ! ! ! CLRRS ! ! !
92 * ! ! +--------+ ! !
93 * ! ! ! ! !
94 * \------- ! --------------------[C]--------\ ! !
95 * ! ! ! !
96 * cmd->error---\ +--------+ ! !
97 * ! +--------------->! SENSE !<----------/ !
98 * STAT_FAIL----/ +--------+ !
99 * ! ! V
100 * ! V +--------+
101 * \--------------------------------\--------------------->! DONE !
102 * +--------+
106 * This many LUNs per USB device.
107 * Every one of them takes a host, see UB_MAX_HOSTS.
109 #define UB_MAX_LUNS 9
114 #define UB_PARTS_PER_LUN 8
116 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
118 #define UB_SENSE_SIZE 18
123 /* command block wrapper */
124 struct bulk_cb_wrap {
125 __le32 Signature; /* contains 'USBC' */
126 u32 Tag; /* unique per command id */
127 __le32 DataTransferLength; /* size of data */
128 u8 Flags; /* direction in bit 0 */
129 u8 Lun; /* LUN */
130 u8 Length; /* of of the CDB */
131 u8 CDB[UB_MAX_CDB_SIZE]; /* max command */
134 #define US_BULK_CB_WRAP_LEN 31
135 #define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
136 #define US_BULK_FLAG_IN 1
137 #define US_BULK_FLAG_OUT 0
139 /* command status wrapper */
140 struct bulk_cs_wrap {
141 __le32 Signature; /* should = 'USBS' */
142 u32 Tag; /* same as original command */
143 __le32 Residue; /* amount not transferred */
144 u8 Status; /* see below */
147 #define US_BULK_CS_WRAP_LEN 13
148 #define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
149 #define US_BULK_STAT_OK 0
150 #define US_BULK_STAT_FAIL 1
151 #define US_BULK_STAT_PHASE 2
153 /* bulk-only class specific requests */
154 #define US_BULK_RESET_REQUEST 0xff
155 #define US_BULK_GET_MAX_LUN 0xfe
159 struct ub_dev;
161 #define UB_MAX_REQ_SG 9 /* cdrecord requires 32KB and maybe a header */
162 #define UB_MAX_SECTORS 64
165 * A second is more than enough for a 32K transfer (UB_MAX_SECTORS)
166 * even if a webcam hogs the bus, but some devices need time to spin up.
168 #define UB_URB_TIMEOUT (HZ*2)
169 #define UB_DATA_TIMEOUT (HZ*5) /* ZIP does spin-ups in the data phase */
170 #define UB_STAT_TIMEOUT (HZ*5) /* Same spinups and eject for a dataless cmd. */
171 #define UB_CTRL_TIMEOUT (HZ/2) /* 500ms ought to be enough to clear a stall */
174 * An instance of a SCSI command in transit.
176 #define UB_DIR_NONE 0
177 #define UB_DIR_READ 1
178 #define UB_DIR_ILLEGAL2 2
179 #define UB_DIR_WRITE 3
181 #define UB_DIR_CHAR(c) (((c)==UB_DIR_WRITE)? 'w': \
182 (((c)==UB_DIR_READ)? 'r': 'n'))
184 enum ub_scsi_cmd_state {
185 UB_CMDST_INIT, /* Initial state */
186 UB_CMDST_CMD, /* Command submitted */
187 UB_CMDST_DATA, /* Data phase */
188 UB_CMDST_CLR2STS, /* Clearing before requesting status */
189 UB_CMDST_STAT, /* Status phase */
190 UB_CMDST_CLEAR, /* Clearing a stall (halt, actually) */
191 UB_CMDST_CLRRS, /* Clearing before retrying status */
192 UB_CMDST_SENSE, /* Sending Request Sense */
193 UB_CMDST_DONE /* Final state */
196 struct ub_scsi_cmd {
197 unsigned char cdb[UB_MAX_CDB_SIZE];
198 unsigned char cdb_len;
200 unsigned char dir; /* 0 - none, 1 - read, 3 - write. */
201 enum ub_scsi_cmd_state state;
202 unsigned int tag;
203 struct ub_scsi_cmd *next;
205 int error; /* Return code - valid upon done */
206 unsigned int act_len; /* Return size */
207 unsigned char key, asc, ascq; /* May be valid if error==-EIO */
209 int stat_count; /* Retries getting status. */
210 unsigned int timeo; /* jiffies until rq->timeout changes */
212 unsigned int len; /* Requested length */
213 unsigned int current_sg;
214 unsigned int nsg; /* sgv[nsg] */
215 struct scatterlist sgv[UB_MAX_REQ_SG];
217 struct ub_lun *lun;
218 void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
219 void *back;
222 struct ub_request {
223 struct request *rq;
224 unsigned int current_try;
225 unsigned int nsg; /* sgv[nsg] */
226 struct scatterlist sgv[UB_MAX_REQ_SG];
231 struct ub_capacity {
232 unsigned long nsec; /* Linux size - 512 byte sectors */
233 unsigned int bsize; /* Linux hardsect_size */
234 unsigned int bshift; /* Shift between 512 and hard sects */
238 * This is a direct take-off from linux/include/completion.h
239 * The difference is that I do not wait on this thing, just poll.
240 * When I want to wait (ub_probe), I just use the stock completion.
242 * Note that INIT_COMPLETION takes no lock. It is correct. But why
243 * in the bloody hell that thing takes struct instead of pointer to struct
244 * is quite beyond me. I just copied it from the stock completion.
246 struct ub_completion {
247 unsigned int done;
248 spinlock_t lock;
251 static inline void ub_init_completion(struct ub_completion *x)
253 x->done = 0;
254 spin_lock_init(&x->lock);
257 #define UB_INIT_COMPLETION(x) ((x).done = 0)
259 static void ub_complete(struct ub_completion *x)
261 unsigned long flags;
263 spin_lock_irqsave(&x->lock, flags);
264 x->done++;
265 spin_unlock_irqrestore(&x->lock, flags);
268 static int ub_is_completed(struct ub_completion *x)
270 unsigned long flags;
271 int ret;
273 spin_lock_irqsave(&x->lock, flags);
274 ret = x->done;
275 spin_unlock_irqrestore(&x->lock, flags);
276 return ret;
281 struct ub_scsi_cmd_queue {
282 int qlen, qmax;
283 struct ub_scsi_cmd *head, *tail;
287 * The block device instance (one per LUN).
289 struct ub_lun {
290 struct ub_dev *udev;
291 struct list_head link;
292 struct gendisk *disk;
293 int id; /* Host index */
294 int num; /* LUN number */
295 char name[16];
297 int changed; /* Media was changed */
298 int removable;
299 int readonly;
301 struct ub_request urq;
303 /* Use Ingo's mempool if or when we have more than one command. */
305 * Currently we never need more than one command for the whole device.
306 * However, giving every LUN a command is a cheap and automatic way
307 * to enforce fairness between them.
309 int cmda[1];
310 struct ub_scsi_cmd cmdv[1];
312 struct ub_capacity capacity;
316 * The USB device instance.
318 struct ub_dev {
319 spinlock_t *lock;
320 atomic_t poison; /* The USB device is disconnected */
321 int openc; /* protected by ub_lock! */
322 /* kref is too implicit for our taste */
323 int reset; /* Reset is running */
324 int bad_resid;
325 unsigned int tagcnt;
326 char name[12];
327 struct usb_device *dev;
328 struct usb_interface *intf;
330 struct list_head luns;
332 unsigned int send_bulk_pipe; /* cached pipe values */
333 unsigned int recv_bulk_pipe;
334 unsigned int send_ctrl_pipe;
335 unsigned int recv_ctrl_pipe;
337 struct tasklet_struct tasklet;
339 struct ub_scsi_cmd_queue cmd_queue;
340 struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
341 unsigned char top_sense[UB_SENSE_SIZE];
343 struct ub_completion work_done;
344 struct urb work_urb;
345 struct timer_list work_timer;
346 int last_pipe; /* What might need clearing */
347 __le32 signature; /* Learned signature */
348 struct bulk_cb_wrap work_bcb;
349 struct bulk_cs_wrap work_bcs;
350 struct usb_ctrlrequest work_cr;
352 struct work_struct reset_work;
353 wait_queue_head_t reset_wait;
358 static void ub_cleanup(struct ub_dev *sc);
359 static int ub_request_fn_1(struct ub_lun *lun, struct request *rq);
360 static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
361 struct ub_scsi_cmd *cmd, struct ub_request *urq);
362 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
363 struct ub_scsi_cmd *cmd, struct ub_request *urq);
364 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
365 static void ub_end_rq(struct request *rq, unsigned int status);
366 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
367 struct ub_request *urq, struct ub_scsi_cmd *cmd);
368 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
369 static void ub_urb_complete(struct urb *urb);
370 static void ub_scsi_action(unsigned long _dev);
371 static void ub_scsi_dispatch(struct ub_dev *sc);
372 static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
373 static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
374 static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc);
375 static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
376 static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
377 static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
378 static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
379 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
380 int stalled_pipe);
381 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
382 static void ub_reset_enter(struct ub_dev *sc, int try);
383 static void ub_reset_task(struct work_struct *work);
384 static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
385 static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
386 struct ub_capacity *ret);
387 static int ub_sync_reset(struct ub_dev *sc);
388 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
389 static int ub_probe_lun(struct ub_dev *sc, int lnum);
393 #ifdef CONFIG_USB_LIBUSUAL
395 #define ub_usb_ids usb_storage_usb_ids
396 #else
398 static const struct usb_device_id ub_usb_ids[] = {
399 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
403 MODULE_DEVICE_TABLE(usb, ub_usb_ids);
404 #endif /* CONFIG_USB_LIBUSUAL */
407 * Find me a way to identify "next free minor" for add_disk(),
408 * and the array disappears the next day. However, the number of
409 * hosts has something to do with the naming and /proc/partitions.
410 * This has to be thought out in detail before changing.
411 * If UB_MAX_HOST was 1000, we'd use a bitmap. Or a better data structure.
413 #define UB_MAX_HOSTS 26
414 static char ub_hostv[UB_MAX_HOSTS];
416 #define UB_QLOCK_NUM 5
417 static spinlock_t ub_qlockv[UB_QLOCK_NUM];
418 static int ub_qlock_next = 0;
420 static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
423 * The id allocator.
425 * This also stores the host for indexing by minor, which is somewhat dirty.
427 static int ub_id_get(void)
429 unsigned long flags;
430 int i;
432 spin_lock_irqsave(&ub_lock, flags);
433 for (i = 0; i < UB_MAX_HOSTS; i++) {
434 if (ub_hostv[i] == 0) {
435 ub_hostv[i] = 1;
436 spin_unlock_irqrestore(&ub_lock, flags);
437 return i;
440 spin_unlock_irqrestore(&ub_lock, flags);
441 return -1;
444 static void ub_id_put(int id)
446 unsigned long flags;
448 if (id < 0 || id >= UB_MAX_HOSTS) {
449 printk(KERN_ERR DRV_NAME ": bad host ID %d\n", id);
450 return;
453 spin_lock_irqsave(&ub_lock, flags);
454 if (ub_hostv[id] == 0) {
455 spin_unlock_irqrestore(&ub_lock, flags);
456 printk(KERN_ERR DRV_NAME ": freeing free host ID %d\n", id);
457 return;
459 ub_hostv[id] = 0;
460 spin_unlock_irqrestore(&ub_lock, flags);
464 * This is necessitated by the fact that blk_cleanup_queue does not
465 * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
466 * Since our blk_init_queue() passes a spinlock common with ub_dev,
467 * we have life time issues when ub_cleanup frees ub_dev.
469 static spinlock_t *ub_next_lock(void)
471 unsigned long flags;
472 spinlock_t *ret;
474 spin_lock_irqsave(&ub_lock, flags);
475 ret = &ub_qlockv[ub_qlock_next];
476 ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
477 spin_unlock_irqrestore(&ub_lock, flags);
478 return ret;
482 * Downcount for deallocation. This rides on two assumptions:
483 * - once something is poisoned, its refcount cannot grow
484 * - opens cannot happen at this time (del_gendisk was done)
485 * If the above is true, we can drop the lock, which we need for
486 * blk_cleanup_queue(): the silly thing may attempt to sleep.
487 * [Actually, it never needs to sleep for us, but it calls might_sleep()]
489 static void ub_put(struct ub_dev *sc)
491 unsigned long flags;
493 spin_lock_irqsave(&ub_lock, flags);
494 --sc->openc;
495 if (sc->openc == 0 && atomic_read(&sc->poison)) {
496 spin_unlock_irqrestore(&ub_lock, flags);
497 ub_cleanup(sc);
498 } else {
499 spin_unlock_irqrestore(&ub_lock, flags);
504 * Final cleanup and deallocation.
506 static void ub_cleanup(struct ub_dev *sc)
508 struct list_head *p;
509 struct ub_lun *lun;
510 struct request_queue *q;
512 while (!list_empty(&sc->luns)) {
513 p = sc->luns.next;
514 lun = list_entry(p, struct ub_lun, link);
515 list_del(p);
517 /* I don't think queue can be NULL. But... Stolen from sx8.c */
518 if ((q = lun->disk->queue) != NULL)
519 blk_cleanup_queue(q);
521 * If we zero disk->private_data BEFORE put_disk, we have
522 * to check for NULL all over the place in open, release,
523 * check_media and revalidate, because the block level
524 * semaphore is well inside the put_disk.
525 * But we cannot zero after the call, because *disk is gone.
526 * The sd.c is blatantly racy in this area.
528 /* disk->private_data = NULL; */
529 put_disk(lun->disk);
530 lun->disk = NULL;
532 ub_id_put(lun->id);
533 kfree(lun);
536 usb_set_intfdata(sc->intf, NULL);
537 usb_put_intf(sc->intf);
538 usb_put_dev(sc->dev);
539 kfree(sc);
543 * The "command allocator".
545 static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
547 struct ub_scsi_cmd *ret;
549 if (lun->cmda[0])
550 return NULL;
551 ret = &lun->cmdv[0];
552 lun->cmda[0] = 1;
553 return ret;
556 static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
558 if (cmd != &lun->cmdv[0]) {
559 printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
560 lun->name, cmd);
561 return;
563 if (!lun->cmda[0]) {
564 printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
565 return;
567 lun->cmda[0] = 0;
571 * The command queue.
573 static void ub_cmdq_add(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
575 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
577 if (t->qlen++ == 0) {
578 t->head = cmd;
579 t->tail = cmd;
580 } else {
581 t->tail->next = cmd;
582 t->tail = cmd;
585 if (t->qlen > t->qmax)
586 t->qmax = t->qlen;
589 static void ub_cmdq_insert(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
591 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
593 if (t->qlen++ == 0) {
594 t->head = cmd;
595 t->tail = cmd;
596 } else {
597 cmd->next = t->head;
598 t->head = cmd;
601 if (t->qlen > t->qmax)
602 t->qmax = t->qlen;
605 static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
607 struct ub_scsi_cmd_queue *t = &sc->cmd_queue;
608 struct ub_scsi_cmd *cmd;
610 if (t->qlen == 0)
611 return NULL;
612 if (--t->qlen == 0)
613 t->tail = NULL;
614 cmd = t->head;
615 t->head = cmd->next;
616 cmd->next = NULL;
617 return cmd;
620 #define ub_cmdq_peek(sc) ((sc)->cmd_queue.head)
623 * The request function is our main entry point
626 static void ub_request_fn(struct request_queue *q)
628 struct ub_lun *lun = q->queuedata;
629 struct request *rq;
631 while ((rq = blk_peek_request(q)) != NULL) {
632 if (ub_request_fn_1(lun, rq) != 0) {
633 blk_stop_queue(q);
634 break;
639 static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)
641 struct ub_dev *sc = lun->udev;
642 struct ub_scsi_cmd *cmd;
643 struct ub_request *urq;
644 int n_elem;
646 if (atomic_read(&sc->poison)) {
647 blk_start_request(rq);
648 ub_end_rq(rq, DID_NO_CONNECT << 16);
649 return 0;
652 if (lun->changed && rq->cmd_type != REQ_TYPE_BLOCK_PC) {
653 blk_start_request(rq);
654 ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
655 return 0;
658 if (lun->urq.rq != NULL)
659 return -1;
660 if ((cmd = ub_get_cmd(lun)) == NULL)
661 return -1;
662 memset(cmd, 0, sizeof(struct ub_scsi_cmd));
664 blk_start_request(rq);
666 urq = &lun->urq;
667 memset(urq, 0, sizeof(struct ub_request));
668 urq->rq = rq;
671 * get scatterlist from block layer
673 sg_init_table(&urq->sgv[0], UB_MAX_REQ_SG);
674 n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]);
675 if (n_elem < 0) {
676 /* Impossible, because blk_rq_map_sg should not hit ENOMEM. */
677 printk(KERN_INFO "%s: failed request map (%d)\n",
678 lun->name, n_elem);
679 goto drop;
681 if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */
682 printk(KERN_WARNING "%s: request with %d segments\n",
683 lun->name, n_elem);
684 goto drop;
686 urq->nsg = n_elem;
688 if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
689 ub_cmd_build_packet(sc, lun, cmd, urq);
690 } else {
691 ub_cmd_build_block(sc, lun, cmd, urq);
693 cmd->state = UB_CMDST_INIT;
694 cmd->lun = lun;
695 cmd->done = ub_rw_cmd_done;
696 cmd->back = urq;
698 cmd->tag = sc->tagcnt++;
699 if (ub_submit_scsi(sc, cmd) != 0)
700 goto drop;
702 return 0;
704 drop:
705 ub_put_cmd(lun, cmd);
706 ub_end_rq(rq, DID_ERROR << 16);
707 return 0;
710 static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
711 struct ub_scsi_cmd *cmd, struct ub_request *urq)
713 struct request *rq = urq->rq;
714 unsigned int block, nblks;
716 if (rq_data_dir(rq) == WRITE)
717 cmd->dir = UB_DIR_WRITE;
718 else
719 cmd->dir = UB_DIR_READ;
721 cmd->nsg = urq->nsg;
722 memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
725 * build the command
727 * The call to blk_queue_logical_block_size() guarantees that request
728 * is aligned, but it is given in terms of 512 byte units, always.
730 block = blk_rq_pos(rq) >> lun->capacity.bshift;
731 nblks = blk_rq_sectors(rq) >> lun->capacity.bshift;
733 cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10;
734 /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
735 cmd->cdb[2] = block >> 24;
736 cmd->cdb[3] = block >> 16;
737 cmd->cdb[4] = block >> 8;
738 cmd->cdb[5] = block;
739 cmd->cdb[7] = nblks >> 8;
740 cmd->cdb[8] = nblks;
741 cmd->cdb_len = 10;
743 cmd->len = blk_rq_bytes(rq);
746 static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
747 struct ub_scsi_cmd *cmd, struct ub_request *urq)
749 struct request *rq = urq->rq;
751 if (blk_rq_bytes(rq) == 0) {
752 cmd->dir = UB_DIR_NONE;
753 } else {
754 if (rq_data_dir(rq) == WRITE)
755 cmd->dir = UB_DIR_WRITE;
756 else
757 cmd->dir = UB_DIR_READ;
760 cmd->nsg = urq->nsg;
761 memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg);
763 memcpy(&cmd->cdb, rq->cmd, rq->cmd_len);
764 cmd->cdb_len = rq->cmd_len;
766 cmd->len = blk_rq_bytes(rq);
769 * To reapply this to every URB is not as incorrect as it looks.
770 * In return, we avoid any complicated tracking calculations.
772 cmd->timeo = rq->timeout;
775 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
777 struct ub_lun *lun = cmd->lun;
778 struct ub_request *urq = cmd->back;
779 struct request *rq;
780 unsigned int scsi_status;
782 rq = urq->rq;
784 if (cmd->error == 0) {
785 if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
786 if (cmd->act_len >= rq->resid_len)
787 rq->resid_len = 0;
788 else
789 rq->resid_len -= cmd->act_len;
790 scsi_status = 0;
791 } else {
792 if (cmd->act_len != cmd->len) {
793 scsi_status = SAM_STAT_CHECK_CONDITION;
794 } else {
795 scsi_status = 0;
798 } else {
799 if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
800 /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
801 memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
802 rq->sense_len = UB_SENSE_SIZE;
803 if (sc->top_sense[0] != 0)
804 scsi_status = SAM_STAT_CHECK_CONDITION;
805 else
806 scsi_status = DID_ERROR << 16;
807 } else {
808 if (cmd->error == -EIO &&
809 (cmd->key == 0 ||
810 cmd->key == MEDIUM_ERROR ||
811 cmd->key == UNIT_ATTENTION)) {
812 if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
813 return;
815 scsi_status = SAM_STAT_CHECK_CONDITION;
819 urq->rq = NULL;
821 ub_put_cmd(lun, cmd);
822 ub_end_rq(rq, scsi_status);
823 blk_start_queue(lun->disk->queue);
826 static void ub_end_rq(struct request *rq, unsigned int scsi_status)
828 int error;
830 if (scsi_status == 0) {
831 error = 0;
832 } else {
833 error = -EIO;
834 rq->errors = scsi_status;
836 __blk_end_request_all(rq, error);
839 static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
840 struct ub_request *urq, struct ub_scsi_cmd *cmd)
843 if (atomic_read(&sc->poison))
844 return -ENXIO;
846 ub_reset_enter(sc, urq->current_try);
848 if (urq->current_try >= 3)
849 return -EIO;
850 urq->current_try++;
852 /* Remove this if anyone complains of flooding. */
853 printk(KERN_DEBUG "%s: dir %c len/act %d/%d "
854 "[sense %x %02x %02x] retry %d\n",
855 sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len,
856 cmd->key, cmd->asc, cmd->ascq, urq->current_try);
858 memset(cmd, 0, sizeof(struct ub_scsi_cmd));
859 ub_cmd_build_block(sc, lun, cmd, urq);
861 cmd->state = UB_CMDST_INIT;
862 cmd->lun = lun;
863 cmd->done = ub_rw_cmd_done;
864 cmd->back = urq;
866 cmd->tag = sc->tagcnt++;
868 #if 0 /* Wasteful */
869 return ub_submit_scsi(sc, cmd);
870 #else
871 ub_cmdq_add(sc, cmd);
872 return 0;
873 #endif
877 * Submit a regular SCSI operation (not an auto-sense).
879 * The Iron Law of Good Submit Routine is:
880 * Zero return - callback is done, Nonzero return - callback is not done.
881 * No exceptions.
883 * Host is assumed locked.
885 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
888 if (cmd->state != UB_CMDST_INIT ||
889 (cmd->dir != UB_DIR_NONE && cmd->len == 0)) {
890 return -EINVAL;
893 ub_cmdq_add(sc, cmd);
895 * We can call ub_scsi_dispatch(sc) right away here, but it's a little
896 * safer to jump to a tasklet, in case upper layers do something silly.
898 tasklet_schedule(&sc->tasklet);
899 return 0;
903 * Submit the first URB for the queued command.
904 * This function does not deal with queueing in any way.
906 static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
908 struct bulk_cb_wrap *bcb;
909 int rc;
911 bcb = &sc->work_bcb;
914 * ``If the allocation length is eighteen or greater, and a device
915 * server returns less than eithteen bytes of data, the application
916 * client should assume that the bytes not transferred would have been
917 * zeroes had the device server returned those bytes.''
919 * We zero sense for all commands so that when a packet request
920 * fails it does not return a stale sense.
922 memset(&sc->top_sense, 0, UB_SENSE_SIZE);
924 /* set up the command wrapper */
925 bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
926 bcb->Tag = cmd->tag; /* Endianness is not important */
927 bcb->DataTransferLength = cpu_to_le32(cmd->len);
928 bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
929 bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
930 bcb->Length = cmd->cdb_len;
932 /* copy the command payload */
933 memcpy(bcb->CDB, cmd->cdb, UB_MAX_CDB_SIZE);
935 UB_INIT_COMPLETION(sc->work_done);
937 sc->last_pipe = sc->send_bulk_pipe;
938 usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->send_bulk_pipe,
939 bcb, US_BULK_CB_WRAP_LEN, ub_urb_complete, sc);
941 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
942 /* XXX Clear stalls */
943 ub_complete(&sc->work_done);
944 return rc;
947 sc->work_timer.expires = jiffies + UB_URB_TIMEOUT;
948 add_timer(&sc->work_timer);
950 cmd->state = UB_CMDST_CMD;
951 return 0;
955 * Timeout handler.
957 static void ub_urb_timeout(unsigned long arg)
959 struct ub_dev *sc = (struct ub_dev *) arg;
960 unsigned long flags;
962 spin_lock_irqsave(sc->lock, flags);
963 if (!ub_is_completed(&sc->work_done))
964 usb_unlink_urb(&sc->work_urb);
965 spin_unlock_irqrestore(sc->lock, flags);
969 * Completion routine for the work URB.
971 * This can be called directly from usb_submit_urb (while we have
972 * the sc->lock taken) and from an interrupt (while we do NOT have
973 * the sc->lock taken). Therefore, bounce this off to a tasklet.
975 static void ub_urb_complete(struct urb *urb)
977 struct ub_dev *sc = urb->context;
979 ub_complete(&sc->work_done);
980 tasklet_schedule(&sc->tasklet);
983 static void ub_scsi_action(unsigned long _dev)
985 struct ub_dev *sc = (struct ub_dev *) _dev;
986 unsigned long flags;
988 spin_lock_irqsave(sc->lock, flags);
989 ub_scsi_dispatch(sc);
990 spin_unlock_irqrestore(sc->lock, flags);
993 static void ub_scsi_dispatch(struct ub_dev *sc)
995 struct ub_scsi_cmd *cmd;
996 int rc;
998 while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) {
999 if (cmd->state == UB_CMDST_DONE) {
1000 ub_cmdq_pop(sc);
1001 (*cmd->done)(sc, cmd);
1002 } else if (cmd->state == UB_CMDST_INIT) {
1003 if ((rc = ub_scsi_cmd_start(sc, cmd)) == 0)
1004 break;
1005 cmd->error = rc;
1006 cmd->state = UB_CMDST_DONE;
1007 } else {
1008 if (!ub_is_completed(&sc->work_done))
1009 break;
1010 del_timer(&sc->work_timer);
1011 ub_scsi_urb_compl(sc, cmd);
1016 static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1018 struct urb *urb = &sc->work_urb;
1019 struct bulk_cs_wrap *bcs;
1020 int endp;
1021 int len;
1022 int rc;
1024 if (atomic_read(&sc->poison)) {
1025 ub_state_done(sc, cmd, -ENODEV);
1026 return;
1029 endp = usb_pipeendpoint(sc->last_pipe);
1030 if (usb_pipein(sc->last_pipe))
1031 endp |= USB_DIR_IN;
1033 if (cmd->state == UB_CMDST_CLEAR) {
1034 if (urb->status == -EPIPE) {
1036 * STALL while clearning STALL.
1037 * The control pipe clears itself - nothing to do.
1039 printk(KERN_NOTICE "%s: stall on control pipe\n",
1040 sc->name);
1041 goto Bad_End;
1045 * We ignore the result for the halt clear.
1048 usb_reset_endpoint(sc->dev, endp);
1050 ub_state_sense(sc, cmd);
1052 } else if (cmd->state == UB_CMDST_CLR2STS) {
1053 if (urb->status == -EPIPE) {
1054 printk(KERN_NOTICE "%s: stall on control pipe\n",
1055 sc->name);
1056 goto Bad_End;
1060 * We ignore the result for the halt clear.
1063 usb_reset_endpoint(sc->dev, endp);
1065 ub_state_stat(sc, cmd);
1067 } else if (cmd->state == UB_CMDST_CLRRS) {
1068 if (urb->status == -EPIPE) {
1069 printk(KERN_NOTICE "%s: stall on control pipe\n",
1070 sc->name);
1071 goto Bad_End;
1075 * We ignore the result for the halt clear.
1078 usb_reset_endpoint(sc->dev, endp);
1080 ub_state_stat_counted(sc, cmd);
1082 } else if (cmd->state == UB_CMDST_CMD) {
1083 switch (urb->status) {
1084 case 0:
1085 break;
1086 case -EOVERFLOW:
1087 goto Bad_End;
1088 case -EPIPE:
1089 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1090 if (rc != 0) {
1091 printk(KERN_NOTICE "%s: "
1092 "unable to submit clear (%d)\n",
1093 sc->name, rc);
1095 * This is typically ENOMEM or some other such shit.
1096 * Retrying is pointless. Just do Bad End on it...
1098 ub_state_done(sc, cmd, rc);
1099 return;
1101 cmd->state = UB_CMDST_CLEAR;
1102 return;
1103 case -ESHUTDOWN: /* unplug */
1104 case -EILSEQ: /* unplug timeout on uhci */
1105 ub_state_done(sc, cmd, -ENODEV);
1106 return;
1107 default:
1108 goto Bad_End;
1110 if (urb->actual_length != US_BULK_CB_WRAP_LEN) {
1111 goto Bad_End;
1114 if (cmd->dir == UB_DIR_NONE || cmd->nsg < 1) {
1115 ub_state_stat(sc, cmd);
1116 return;
1119 // udelay(125); // usb-storage has this
1120 ub_data_start(sc, cmd);
1122 } else if (cmd->state == UB_CMDST_DATA) {
1123 if (urb->status == -EPIPE) {
1124 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1125 if (rc != 0) {
1126 printk(KERN_NOTICE "%s: "
1127 "unable to submit clear (%d)\n",
1128 sc->name, rc);
1129 ub_state_done(sc, cmd, rc);
1130 return;
1132 cmd->state = UB_CMDST_CLR2STS;
1133 return;
1135 if (urb->status == -EOVERFLOW) {
1137 * A babble? Failure, but we must transfer CSW now.
1139 cmd->error = -EOVERFLOW; /* A cheap trick... */
1140 ub_state_stat(sc, cmd);
1141 return;
1144 if (cmd->dir == UB_DIR_WRITE) {
1146 * Do not continue writes in case of a failure.
1147 * Doing so would cause sectors to be mixed up,
1148 * which is worse than sectors lost.
1150 * We must try to read the CSW, or many devices
1151 * get confused.
1153 len = urb->actual_length;
1154 if (urb->status != 0 ||
1155 len != cmd->sgv[cmd->current_sg].length) {
1156 cmd->act_len += len;
1158 cmd->error = -EIO;
1159 ub_state_stat(sc, cmd);
1160 return;
1163 } else {
1165 * If an error occurs on read, we record it, and
1166 * continue to fetch data in order to avoid bubble.
1168 * As a small shortcut, we stop if we detect that
1169 * a CSW mixed into data.
1171 if (urb->status != 0)
1172 cmd->error = -EIO;
1174 len = urb->actual_length;
1175 if (urb->status != 0 ||
1176 len != cmd->sgv[cmd->current_sg].length) {
1177 if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN)
1178 goto Bad_End;
1182 cmd->act_len += urb->actual_length;
1184 if (++cmd->current_sg < cmd->nsg) {
1185 ub_data_start(sc, cmd);
1186 return;
1188 ub_state_stat(sc, cmd);
1190 } else if (cmd->state == UB_CMDST_STAT) {
1191 if (urb->status == -EPIPE) {
1192 rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
1193 if (rc != 0) {
1194 printk(KERN_NOTICE "%s: "
1195 "unable to submit clear (%d)\n",
1196 sc->name, rc);
1197 ub_state_done(sc, cmd, rc);
1198 return;
1202 * Having a stall when getting CSW is an error, so
1203 * make sure uppper levels are not oblivious to it.
1205 cmd->error = -EIO; /* A cheap trick... */
1207 cmd->state = UB_CMDST_CLRRS;
1208 return;
1211 /* Catch everything, including -EOVERFLOW and other nasties. */
1212 if (urb->status != 0)
1213 goto Bad_End;
1215 if (urb->actual_length == 0) {
1216 ub_state_stat_counted(sc, cmd);
1217 return;
1221 * Check the returned Bulk protocol status.
1222 * The status block has to be validated first.
1225 bcs = &sc->work_bcs;
1227 if (sc->signature == cpu_to_le32(0)) {
1229 * This is the first reply, so do not perform the check.
1230 * Instead, remember the signature the device uses
1231 * for future checks. But do not allow a nul.
1233 sc->signature = bcs->Signature;
1234 if (sc->signature == cpu_to_le32(0)) {
1235 ub_state_stat_counted(sc, cmd);
1236 return;
1238 } else {
1239 if (bcs->Signature != sc->signature) {
1240 ub_state_stat_counted(sc, cmd);
1241 return;
1245 if (bcs->Tag != cmd->tag) {
1247 * This usually happens when we disagree with the
1248 * device's microcode about something. For instance,
1249 * a few of them throw this after timeouts. They buffer
1250 * commands and reply at commands we timed out before.
1251 * Without flushing these replies we loop forever.
1253 ub_state_stat_counted(sc, cmd);
1254 return;
1257 if (!sc->bad_resid) {
1258 len = le32_to_cpu(bcs->Residue);
1259 if (len != cmd->len - cmd->act_len) {
1261 * Only start ignoring if this cmd ended well.
1263 if (cmd->len == cmd->act_len) {
1264 printk(KERN_NOTICE "%s: "
1265 "bad residual %d of %d, ignoring\n",
1266 sc->name, len, cmd->len);
1267 sc->bad_resid = 1;
1272 switch (bcs->Status) {
1273 case US_BULK_STAT_OK:
1274 break;
1275 case US_BULK_STAT_FAIL:
1276 ub_state_sense(sc, cmd);
1277 return;
1278 case US_BULK_STAT_PHASE:
1279 goto Bad_End;
1280 default:
1281 printk(KERN_INFO "%s: unknown CSW status 0x%x\n",
1282 sc->name, bcs->Status);
1283 ub_state_done(sc, cmd, -EINVAL);
1284 return;
1287 /* Not zeroing error to preserve a babble indicator */
1288 if (cmd->error != 0) {
1289 ub_state_sense(sc, cmd);
1290 return;
1292 cmd->state = UB_CMDST_DONE;
1293 ub_cmdq_pop(sc);
1294 (*cmd->done)(sc, cmd);
1296 } else if (cmd->state == UB_CMDST_SENSE) {
1297 ub_state_done(sc, cmd, -EIO);
1299 } else {
1300 printk(KERN_WARNING "%s: wrong command state %d\n",
1301 sc->name, cmd->state);
1302 ub_state_done(sc, cmd, -EINVAL);
1303 return;
1305 return;
1307 Bad_End: /* Little Excel is dead */
1308 ub_state_done(sc, cmd, -EIO);
1312 * Factorization helper for the command state machine:
1313 * Initiate a data segment transfer.
1315 static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1317 struct scatterlist *sg = &cmd->sgv[cmd->current_sg];
1318 int pipe;
1319 int rc;
1321 UB_INIT_COMPLETION(sc->work_done);
1323 if (cmd->dir == UB_DIR_READ)
1324 pipe = sc->recv_bulk_pipe;
1325 else
1326 pipe = sc->send_bulk_pipe;
1327 sc->last_pipe = pipe;
1328 usb_fill_bulk_urb(&sc->work_urb, sc->dev, pipe, sg_virt(sg),
1329 sg->length, ub_urb_complete, sc);
1331 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1332 /* XXX Clear stalls */
1333 ub_complete(&sc->work_done);
1334 ub_state_done(sc, cmd, rc);
1335 return;
1338 if (cmd->timeo)
1339 sc->work_timer.expires = jiffies + cmd->timeo;
1340 else
1341 sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT;
1342 add_timer(&sc->work_timer);
1344 cmd->state = UB_CMDST_DATA;
1348 * Factorization helper for the command state machine:
1349 * Finish the command.
1351 static void ub_state_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int rc)
1354 cmd->error = rc;
1355 cmd->state = UB_CMDST_DONE;
1356 ub_cmdq_pop(sc);
1357 (*cmd->done)(sc, cmd);
1361 * Factorization helper for the command state machine:
1362 * Submit a CSW read.
1364 static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1366 int rc;
1368 UB_INIT_COMPLETION(sc->work_done);
1370 sc->last_pipe = sc->recv_bulk_pipe;
1371 usb_fill_bulk_urb(&sc->work_urb, sc->dev, sc->recv_bulk_pipe,
1372 &sc->work_bcs, US_BULK_CS_WRAP_LEN, ub_urb_complete, sc);
1374 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1375 /* XXX Clear stalls */
1376 ub_complete(&sc->work_done);
1377 ub_state_done(sc, cmd, rc);
1378 return -1;
1381 if (cmd->timeo)
1382 sc->work_timer.expires = jiffies + cmd->timeo;
1383 else
1384 sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT;
1385 add_timer(&sc->work_timer);
1386 return 0;
1390 * Factorization helper for the command state machine:
1391 * Submit a CSW read and go to STAT state.
1393 static void ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1396 if (__ub_state_stat(sc, cmd) != 0)
1397 return;
1399 cmd->stat_count = 0;
1400 cmd->state = UB_CMDST_STAT;
1404 * Factorization helper for the command state machine:
1405 * Submit a CSW read and go to STAT state with counter (along [C] path).
1407 static void ub_state_stat_counted(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1410 if (++cmd->stat_count >= 4) {
1411 ub_state_sense(sc, cmd);
1412 return;
1415 if (__ub_state_stat(sc, cmd) != 0)
1416 return;
1418 cmd->state = UB_CMDST_STAT;
1422 * Factorization helper for the command state machine:
1423 * Submit a REQUEST SENSE and go to SENSE state.
1425 static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1427 struct ub_scsi_cmd *scmd;
1428 struct scatterlist *sg;
1429 int rc;
1431 if (cmd->cdb[0] == REQUEST_SENSE) {
1432 rc = -EPIPE;
1433 goto error;
1436 scmd = &sc->top_rqs_cmd;
1437 memset(scmd, 0, sizeof(struct ub_scsi_cmd));
1438 scmd->cdb[0] = REQUEST_SENSE;
1439 scmd->cdb[4] = UB_SENSE_SIZE;
1440 scmd->cdb_len = 6;
1441 scmd->dir = UB_DIR_READ;
1442 scmd->state = UB_CMDST_INIT;
1443 scmd->nsg = 1;
1444 sg = &scmd->sgv[0];
1445 sg_init_table(sg, UB_MAX_REQ_SG);
1446 sg_set_page(sg, virt_to_page(sc->top_sense), UB_SENSE_SIZE,
1447 (unsigned long)sc->top_sense & (PAGE_SIZE-1));
1448 scmd->len = UB_SENSE_SIZE;
1449 scmd->lun = cmd->lun;
1450 scmd->done = ub_top_sense_done;
1451 scmd->back = cmd;
1453 scmd->tag = sc->tagcnt++;
1455 cmd->state = UB_CMDST_SENSE;
1457 ub_cmdq_insert(sc, scmd);
1458 return;
1460 error:
1461 ub_state_done(sc, cmd, rc);
1465 * A helper for the command's state machine:
1466 * Submit a stall clear.
1468 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
1469 int stalled_pipe)
1471 int endp;
1472 struct usb_ctrlrequest *cr;
1473 int rc;
1475 endp = usb_pipeendpoint(stalled_pipe);
1476 if (usb_pipein (stalled_pipe))
1477 endp |= USB_DIR_IN;
1479 cr = &sc->work_cr;
1480 cr->bRequestType = USB_RECIP_ENDPOINT;
1481 cr->bRequest = USB_REQ_CLEAR_FEATURE;
1482 cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
1483 cr->wIndex = cpu_to_le16(endp);
1484 cr->wLength = cpu_to_le16(0);
1486 UB_INIT_COMPLETION(sc->work_done);
1488 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
1489 (unsigned char*) cr, NULL, 0, ub_urb_complete, sc);
1491 if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
1492 ub_complete(&sc->work_done);
1493 return rc;
1496 sc->work_timer.expires = jiffies + UB_CTRL_TIMEOUT;
1497 add_timer(&sc->work_timer);
1498 return 0;
1503 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
1505 unsigned char *sense = sc->top_sense;
1506 struct ub_scsi_cmd *cmd;
1509 * Find the command which triggered the unit attention or a check,
1510 * save the sense into it, and advance its state machine.
1512 if ((cmd = ub_cmdq_peek(sc)) == NULL) {
1513 printk(KERN_WARNING "%s: sense done while idle\n", sc->name);
1514 return;
1516 if (cmd != scmd->back) {
1517 printk(KERN_WARNING "%s: "
1518 "sense done for wrong command 0x%x\n",
1519 sc->name, cmd->tag);
1520 return;
1522 if (cmd->state != UB_CMDST_SENSE) {
1523 printk(KERN_WARNING "%s: sense done with bad cmd state %d\n",
1524 sc->name, cmd->state);
1525 return;
1529 * Ignoring scmd->act_len, because the buffer was pre-zeroed.
1531 cmd->key = sense[2] & 0x0F;
1532 cmd->asc = sense[12];
1533 cmd->ascq = sense[13];
1535 ub_scsi_urb_compl(sc, cmd);
1539 * Reset management
1542 static void ub_reset_enter(struct ub_dev *sc, int try)
1545 if (sc->reset) {
1546 /* This happens often on multi-LUN devices. */
1547 return;
1549 sc->reset = try + 1;
1551 #if 0 /* Not needed because the disconnect waits for us. */
1552 unsigned long flags;
1553 spin_lock_irqsave(&ub_lock, flags);
1554 sc->openc++;
1555 spin_unlock_irqrestore(&ub_lock, flags);
1556 #endif
1558 #if 0 /* We let them stop themselves. */
1559 struct ub_lun *lun;
1560 list_for_each_entry(lun, &sc->luns, link) {
1561 blk_stop_queue(lun->disk->queue);
1563 #endif
1565 schedule_work(&sc->reset_work);
1568 static void ub_reset_task(struct work_struct *work)
1570 struct ub_dev *sc = container_of(work, struct ub_dev, reset_work);
1571 unsigned long flags;
1572 struct ub_lun *lun;
1573 int rc;
1575 if (!sc->reset) {
1576 printk(KERN_WARNING "%s: Running reset unrequested\n",
1577 sc->name);
1578 return;
1581 if (atomic_read(&sc->poison)) {
1583 } else if ((sc->reset & 1) == 0) {
1584 ub_sync_reset(sc);
1585 msleep(700); /* usb-storage sleeps 6s (!) */
1586 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
1587 ub_probe_clear_stall(sc, sc->send_bulk_pipe);
1588 } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
1590 } else {
1591 rc = usb_lock_device_for_reset(sc->dev, sc->intf);
1592 if (rc < 0) {
1593 printk(KERN_NOTICE
1594 "%s: usb_lock_device_for_reset failed (%d)\n",
1595 sc->name, rc);
1596 } else {
1597 rc = usb_reset_device(sc->dev);
1598 if (rc < 0) {
1599 printk(KERN_NOTICE "%s: "
1600 "usb_lock_device_for_reset failed (%d)\n",
1601 sc->name, rc);
1603 usb_unlock_device(sc->dev);
1608 * In theory, no commands can be running while reset is active,
1609 * so nobody can ask for another reset, and so we do not need any
1610 * queues of resets or anything. We do need a spinlock though,
1611 * to interact with block layer.
1613 spin_lock_irqsave(sc->lock, flags);
1614 sc->reset = 0;
1615 tasklet_schedule(&sc->tasklet);
1616 list_for_each_entry(lun, &sc->luns, link) {
1617 blk_start_queue(lun->disk->queue);
1619 wake_up(&sc->reset_wait);
1620 spin_unlock_irqrestore(sc->lock, flags);
1624 * XXX Reset brackets are too much hassle to implement, so just stub them
1625 * in order to prevent forced unbinding (which deadlocks solid when our
1626 * ->disconnect method waits for the reset to complete and this kills keventd).
1628 * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device,
1629 * or else the post_reset is invoked, and restats I/O on a locked device.
1631 static int ub_pre_reset(struct usb_interface *iface) {
1632 return 0;
1635 static int ub_post_reset(struct usb_interface *iface) {
1636 return 0;
1640 * This is called from a process context.
1642 static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
1645 lun->readonly = 0; /* XXX Query this from the device */
1647 lun->capacity.nsec = 0;
1648 lun->capacity.bsize = 512;
1649 lun->capacity.bshift = 0;
1651 if (ub_sync_tur(sc, lun) != 0)
1652 return; /* Not ready */
1653 lun->changed = 0;
1655 if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
1657 * The retry here means something is wrong, either with the
1658 * device, with the transport, or with our code.
1659 * We keep this because sd.c has retries for capacity.
1661 if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
1662 lun->capacity.nsec = 0;
1663 lun->capacity.bsize = 512;
1664 lun->capacity.bshift = 0;
1670 * The open funcion.
1671 * This is mostly needed to keep refcounting, but also to support
1672 * media checks on removable media drives.
1674 static int ub_bd_open(struct block_device *bdev, fmode_t mode)
1676 struct ub_lun *lun = bdev->bd_disk->private_data;
1677 struct ub_dev *sc = lun->udev;
1678 unsigned long flags;
1679 int rc;
1681 spin_lock_irqsave(&ub_lock, flags);
1682 if (atomic_read(&sc->poison)) {
1683 spin_unlock_irqrestore(&ub_lock, flags);
1684 return -ENXIO;
1686 sc->openc++;
1687 spin_unlock_irqrestore(&ub_lock, flags);
1689 if (lun->removable || lun->readonly)
1690 check_disk_change(bdev);
1693 * The sd.c considers ->media_present and ->changed not equivalent,
1694 * under some pretty murky conditions (a failure of READ CAPACITY).
1695 * We may need it one day.
1697 if (lun->removable && lun->changed && !(mode & FMODE_NDELAY)) {
1698 rc = -ENOMEDIUM;
1699 goto err_open;
1702 if (lun->readonly && (mode & FMODE_WRITE)) {
1703 rc = -EROFS;
1704 goto err_open;
1707 return 0;
1709 err_open:
1710 ub_put(sc);
1711 return rc;
1714 static int ub_bd_unlocked_open(struct block_device *bdev, fmode_t mode)
1716 int ret;
1718 lock_kernel();
1719 ret = ub_bd_open(bdev, mode);
1720 unlock_kernel();
1722 return ret;
1728 static int ub_bd_release(struct gendisk *disk, fmode_t mode)
1730 struct ub_lun *lun = disk->private_data;
1731 struct ub_dev *sc = lun->udev;
1733 lock_kernel();
1734 ub_put(sc);
1735 unlock_kernel();
1737 return 0;
1741 * The ioctl interface.
1743 static int ub_bd_ioctl(struct block_device *bdev, fmode_t mode,
1744 unsigned int cmd, unsigned long arg)
1746 struct gendisk *disk = bdev->bd_disk;
1747 void __user *usermem = (void __user *) arg;
1748 int ret;
1750 lock_kernel();
1751 ret = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, usermem);
1752 unlock_kernel();
1754 return ret;
1758 * This is called by check_disk_change if we reported a media change.
1759 * The main onjective here is to discover the features of the media such as
1760 * the capacity, read-only status, etc. USB storage generally does not
1761 * need to be spun up, but if we needed it, this would be the place.
1763 * This call can sleep.
1765 * The return code is not used.
1767 static int ub_bd_revalidate(struct gendisk *disk)
1769 struct ub_lun *lun = disk->private_data;
1771 ub_revalidate(lun->udev, lun);
1773 /* XXX Support sector size switching like in sr.c */
1774 blk_queue_logical_block_size(disk->queue, lun->capacity.bsize);
1775 set_capacity(disk, lun->capacity.nsec);
1776 // set_disk_ro(sdkp->disk, lun->readonly);
1778 return 0;
1782 * The check is called by the block layer to verify if the media
1783 * is still available. It is supposed to be harmless, lightweight and
1784 * non-intrusive in case the media was not changed.
1786 * This call can sleep.
1788 * The return code is bool!
1790 static int ub_bd_media_changed(struct gendisk *disk)
1792 struct ub_lun *lun = disk->private_data;
1794 if (!lun->removable)
1795 return 0;
1798 * We clean checks always after every command, so this is not
1799 * as dangerous as it looks. If the TEST_UNIT_READY fails here,
1800 * the device is actually not ready with operator or software
1801 * intervention required. One dangerous item might be a drive which
1802 * spins itself down, and come the time to write dirty pages, this
1803 * will fail, then block layer discards the data. Since we never
1804 * spin drives up, such devices simply cannot be used with ub anyway.
1806 if (ub_sync_tur(lun->udev, lun) != 0) {
1807 lun->changed = 1;
1808 return 1;
1811 return lun->changed;
1814 static const struct block_device_operations ub_bd_fops = {
1815 .owner = THIS_MODULE,
1816 .open = ub_bd_unlocked_open,
1817 .release = ub_bd_release,
1818 .ioctl = ub_bd_ioctl,
1819 .media_changed = ub_bd_media_changed,
1820 .revalidate_disk = ub_bd_revalidate,
1824 * Common ->done routine for commands executed synchronously.
1826 static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
1828 struct completion *cop = cmd->back;
1829 complete(cop);
1833 * Test if the device has a check condition on it, synchronously.
1835 static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
1837 struct ub_scsi_cmd *cmd;
1838 enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
1839 unsigned long flags;
1840 struct completion compl;
1841 int rc;
1843 init_completion(&compl);
1845 rc = -ENOMEM;
1846 if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
1847 goto err_alloc;
1849 cmd->cdb[0] = TEST_UNIT_READY;
1850 cmd->cdb_len = 6;
1851 cmd->dir = UB_DIR_NONE;
1852 cmd->state = UB_CMDST_INIT;
1853 cmd->lun = lun; /* This may be NULL, but that's ok */
1854 cmd->done = ub_probe_done;
1855 cmd->back = &compl;
1857 spin_lock_irqsave(sc->lock, flags);
1858 cmd->tag = sc->tagcnt++;
1860 rc = ub_submit_scsi(sc, cmd);
1861 spin_unlock_irqrestore(sc->lock, flags);
1863 if (rc != 0)
1864 goto err_submit;
1866 wait_for_completion(&compl);
1868 rc = cmd->error;
1870 if (rc == -EIO && cmd->key != 0) /* Retries for benh's key */
1871 rc = cmd->key;
1873 err_submit:
1874 kfree(cmd);
1875 err_alloc:
1876 return rc;
1880 * Read the SCSI capacity synchronously (for probing).
1882 static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
1883 struct ub_capacity *ret)
1885 struct ub_scsi_cmd *cmd;
1886 struct scatterlist *sg;
1887 char *p;
1888 enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) + 8 };
1889 unsigned long flags;
1890 unsigned int bsize, shift;
1891 unsigned long nsec;
1892 struct completion compl;
1893 int rc;
1895 init_completion(&compl);
1897 rc = -ENOMEM;
1898 if ((cmd = kzalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
1899 goto err_alloc;
1900 p = (char *)cmd + sizeof(struct ub_scsi_cmd);
1902 cmd->cdb[0] = 0x25;
1903 cmd->cdb_len = 10;
1904 cmd->dir = UB_DIR_READ;
1905 cmd->state = UB_CMDST_INIT;
1906 cmd->nsg = 1;
1907 sg = &cmd->sgv[0];
1908 sg_init_table(sg, UB_MAX_REQ_SG);
1909 sg_set_page(sg, virt_to_page(p), 8, (unsigned long)p & (PAGE_SIZE-1));
1910 cmd->len = 8;
1911 cmd->lun = lun;
1912 cmd->done = ub_probe_done;
1913 cmd->back = &compl;
1915 spin_lock_irqsave(sc->lock, flags);
1916 cmd->tag = sc->tagcnt++;
1918 rc = ub_submit_scsi(sc, cmd);
1919 spin_unlock_irqrestore(sc->lock, flags);
1921 if (rc != 0)
1922 goto err_submit;
1924 wait_for_completion(&compl);
1926 if (cmd->error != 0) {
1927 rc = -EIO;
1928 goto err_read;
1930 if (cmd->act_len != 8) {
1931 rc = -EIO;
1932 goto err_read;
1935 /* sd.c special-cases sector size of 0 to mean 512. Needed? Safe? */
1936 nsec = be32_to_cpu(*(__be32 *)p) + 1;
1937 bsize = be32_to_cpu(*(__be32 *)(p + 4));
1938 switch (bsize) {
1939 case 512: shift = 0; break;
1940 case 1024: shift = 1; break;
1941 case 2048: shift = 2; break;
1942 case 4096: shift = 3; break;
1943 default:
1944 rc = -EDOM;
1945 goto err_inv_bsize;
1948 ret->bsize = bsize;
1949 ret->bshift = shift;
1950 ret->nsec = nsec << shift;
1951 rc = 0;
1953 err_inv_bsize:
1954 err_read:
1955 err_submit:
1956 kfree(cmd);
1957 err_alloc:
1958 return rc;
1963 static void ub_probe_urb_complete(struct urb *urb)
1965 struct completion *cop = urb->context;
1966 complete(cop);
1969 static void ub_probe_timeout(unsigned long arg)
1971 struct completion *cop = (struct completion *) arg;
1972 complete(cop);
1976 * Reset with a Bulk reset.
1978 static int ub_sync_reset(struct ub_dev *sc)
1980 int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
1981 struct usb_ctrlrequest *cr;
1982 struct completion compl;
1983 struct timer_list timer;
1984 int rc;
1986 init_completion(&compl);
1988 cr = &sc->work_cr;
1989 cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
1990 cr->bRequest = US_BULK_RESET_REQUEST;
1991 cr->wValue = cpu_to_le16(0);
1992 cr->wIndex = cpu_to_le16(ifnum);
1993 cr->wLength = cpu_to_le16(0);
1995 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
1996 (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
1998 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
1999 printk(KERN_WARNING
2000 "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
2001 return rc;
2004 init_timer(&timer);
2005 timer.function = ub_probe_timeout;
2006 timer.data = (unsigned long) &compl;
2007 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2008 add_timer(&timer);
2010 wait_for_completion(&compl);
2012 del_timer_sync(&timer);
2013 usb_kill_urb(&sc->work_urb);
2015 return sc->work_urb.status;
2019 * Get number of LUNs by the way of Bulk GetMaxLUN command.
2021 static int ub_sync_getmaxlun(struct ub_dev *sc)
2023 int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
2024 unsigned char *p;
2025 enum { ALLOC_SIZE = 1 };
2026 struct usb_ctrlrequest *cr;
2027 struct completion compl;
2028 struct timer_list timer;
2029 int nluns;
2030 int rc;
2032 init_completion(&compl);
2034 rc = -ENOMEM;
2035 if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
2036 goto err_alloc;
2037 *p = 55;
2039 cr = &sc->work_cr;
2040 cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
2041 cr->bRequest = US_BULK_GET_MAX_LUN;
2042 cr->wValue = cpu_to_le16(0);
2043 cr->wIndex = cpu_to_le16(ifnum);
2044 cr->wLength = cpu_to_le16(1);
2046 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
2047 (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
2049 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0)
2050 goto err_submit;
2052 init_timer(&timer);
2053 timer.function = ub_probe_timeout;
2054 timer.data = (unsigned long) &compl;
2055 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2056 add_timer(&timer);
2058 wait_for_completion(&compl);
2060 del_timer_sync(&timer);
2061 usb_kill_urb(&sc->work_urb);
2063 if ((rc = sc->work_urb.status) < 0)
2064 goto err_io;
2066 if (sc->work_urb.actual_length != 1) {
2067 nluns = 0;
2068 } else {
2069 if ((nluns = *p) == 55) {
2070 nluns = 0;
2071 } else {
2072 /* GetMaxLUN returns the maximum LUN number */
2073 nluns += 1;
2074 if (nluns > UB_MAX_LUNS)
2075 nluns = UB_MAX_LUNS;
2079 kfree(p);
2080 return nluns;
2082 err_io:
2083 err_submit:
2084 kfree(p);
2085 err_alloc:
2086 return rc;
2090 * Clear initial stalls.
2092 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
2094 int endp;
2095 struct usb_ctrlrequest *cr;
2096 struct completion compl;
2097 struct timer_list timer;
2098 int rc;
2100 init_completion(&compl);
2102 endp = usb_pipeendpoint(stalled_pipe);
2103 if (usb_pipein (stalled_pipe))
2104 endp |= USB_DIR_IN;
2106 cr = &sc->work_cr;
2107 cr->bRequestType = USB_RECIP_ENDPOINT;
2108 cr->bRequest = USB_REQ_CLEAR_FEATURE;
2109 cr->wValue = cpu_to_le16(USB_ENDPOINT_HALT);
2110 cr->wIndex = cpu_to_le16(endp);
2111 cr->wLength = cpu_to_le16(0);
2113 usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
2114 (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
2116 if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
2117 printk(KERN_WARNING
2118 "%s: Unable to submit a probe clear (%d)\n", sc->name, rc);
2119 return rc;
2122 init_timer(&timer);
2123 timer.function = ub_probe_timeout;
2124 timer.data = (unsigned long) &compl;
2125 timer.expires = jiffies + UB_CTRL_TIMEOUT;
2126 add_timer(&timer);
2128 wait_for_completion(&compl);
2130 del_timer_sync(&timer);
2131 usb_kill_urb(&sc->work_urb);
2133 usb_reset_endpoint(sc->dev, endp);
2135 return 0;
2139 * Get the pipe settings.
2141 static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
2142 struct usb_interface *intf)
2144 struct usb_host_interface *altsetting = intf->cur_altsetting;
2145 struct usb_endpoint_descriptor *ep_in = NULL;
2146 struct usb_endpoint_descriptor *ep_out = NULL;
2147 struct usb_endpoint_descriptor *ep;
2148 int i;
2151 * Find the endpoints we need.
2152 * We are expecting a minimum of 2 endpoints - in and out (bulk).
2153 * We will ignore any others.
2155 for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
2156 ep = &altsetting->endpoint[i].desc;
2158 /* Is it a BULK endpoint? */
2159 if (usb_endpoint_xfer_bulk(ep)) {
2160 /* BULK in or out? */
2161 if (usb_endpoint_dir_in(ep)) {
2162 if (ep_in == NULL)
2163 ep_in = ep;
2164 } else {
2165 if (ep_out == NULL)
2166 ep_out = ep;
2171 if (ep_in == NULL || ep_out == NULL) {
2172 printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name);
2173 return -ENODEV;
2176 /* Calculate and store the pipe values */
2177 sc->send_ctrl_pipe = usb_sndctrlpipe(dev, 0);
2178 sc->recv_ctrl_pipe = usb_rcvctrlpipe(dev, 0);
2179 sc->send_bulk_pipe = usb_sndbulkpipe(dev,
2180 usb_endpoint_num(ep_out));
2181 sc->recv_bulk_pipe = usb_rcvbulkpipe(dev,
2182 usb_endpoint_num(ep_in));
2184 return 0;
2188 * Probing is done in the process context, which allows us to cheat
2189 * and not to build a state machine for the discovery.
2191 static int ub_probe(struct usb_interface *intf,
2192 const struct usb_device_id *dev_id)
2194 struct ub_dev *sc;
2195 int nluns;
2196 int rc;
2197 int i;
2199 if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
2200 return -ENXIO;
2202 rc = -ENOMEM;
2203 if ((sc = kzalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
2204 goto err_core;
2205 sc->lock = ub_next_lock();
2206 INIT_LIST_HEAD(&sc->luns);
2207 usb_init_urb(&sc->work_urb);
2208 tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
2209 atomic_set(&sc->poison, 0);
2210 INIT_WORK(&sc->reset_work, ub_reset_task);
2211 init_waitqueue_head(&sc->reset_wait);
2213 init_timer(&sc->work_timer);
2214 sc->work_timer.data = (unsigned long) sc;
2215 sc->work_timer.function = ub_urb_timeout;
2217 ub_init_completion(&sc->work_done);
2218 sc->work_done.done = 1; /* A little yuk, but oh well... */
2220 sc->dev = interface_to_usbdev(intf);
2221 sc->intf = intf;
2222 // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
2223 usb_set_intfdata(intf, sc);
2224 usb_get_dev(sc->dev);
2226 * Since we give the interface struct to the block level through
2227 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
2228 * oopses on close after a disconnect (kernels 2.6.16 and up).
2230 usb_get_intf(sc->intf);
2232 snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
2233 sc->dev->bus->busnum, sc->dev->devnum);
2235 /* XXX Verify that we can handle the device (from descriptors) */
2237 if (ub_get_pipes(sc, sc->dev, intf) != 0)
2238 goto err_dev_desc;
2241 * At this point, all USB initialization is done, do upper layer.
2242 * We really hate halfway initialized structures, so from the
2243 * invariants perspective, this ub_dev is fully constructed at
2244 * this point.
2248 * This is needed to clear toggles. It is a problem only if we do
2249 * `rmmod ub && modprobe ub` without disconnects, but we like that.
2251 #if 0 /* iPod Mini fails if we do this (big white iPod works) */
2252 ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
2253 ub_probe_clear_stall(sc, sc->send_bulk_pipe);
2254 #endif
2257 * The way this is used by the startup code is a little specific.
2258 * A SCSI check causes a USB stall. Our common case code sees it
2259 * and clears the check, after which the device is ready for use.
2260 * But if a check was not present, any command other than
2261 * TEST_UNIT_READY ends with a lockup (including REQUEST_SENSE).
2263 * If we neglect to clear the SCSI check, the first real command fails
2264 * (which is the capacity readout). We clear that and retry, but why
2265 * causing spurious retries for no reason.
2267 * Revalidation may start with its own TEST_UNIT_READY, but that one
2268 * has to succeed, so we clear checks with an additional one here.
2269 * In any case it's not our business how revaliadation is implemented.
2271 for (i = 0; i < 3; i++) { /* Retries for the schwag key from KS'04 */
2272 if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
2273 if (rc != 0x6) break;
2274 msleep(10);
2277 nluns = 1;
2278 for (i = 0; i < 3; i++) {
2279 if ((rc = ub_sync_getmaxlun(sc)) < 0)
2280 break;
2281 if (rc != 0) {
2282 nluns = rc;
2283 break;
2285 msleep(100);
2288 for (i = 0; i < nluns; i++) {
2289 ub_probe_lun(sc, i);
2291 return 0;
2293 err_dev_desc:
2294 usb_set_intfdata(intf, NULL);
2295 usb_put_intf(sc->intf);
2296 usb_put_dev(sc->dev);
2297 kfree(sc);
2298 err_core:
2299 return rc;
2302 static int ub_probe_lun(struct ub_dev *sc, int lnum)
2304 struct ub_lun *lun;
2305 struct request_queue *q;
2306 struct gendisk *disk;
2307 int rc;
2309 rc = -ENOMEM;
2310 if ((lun = kzalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
2311 goto err_alloc;
2312 lun->num = lnum;
2314 rc = -ENOSR;
2315 if ((lun->id = ub_id_get()) == -1)
2316 goto err_id;
2318 lun->udev = sc;
2320 snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
2321 lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
2323 lun->removable = 1; /* XXX Query this from the device */
2324 lun->changed = 1; /* ub_revalidate clears only */
2325 ub_revalidate(sc, lun);
2327 rc = -ENOMEM;
2328 if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL)
2329 goto err_diskalloc;
2331 sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
2332 disk->major = UB_MAJOR;
2333 disk->first_minor = lun->id * UB_PARTS_PER_LUN;
2334 disk->fops = &ub_bd_fops;
2335 disk->private_data = lun;
2336 disk->driverfs_dev = &sc->intf->dev;
2338 rc = -ENOMEM;
2339 if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
2340 goto err_blkqinit;
2342 disk->queue = q;
2344 blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
2345 blk_queue_max_segments(q, UB_MAX_REQ_SG);
2346 blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
2347 blk_queue_max_hw_sectors(q, UB_MAX_SECTORS);
2348 blk_queue_logical_block_size(q, lun->capacity.bsize);
2350 lun->disk = disk;
2351 q->queuedata = lun;
2352 list_add(&lun->link, &sc->luns);
2354 set_capacity(disk, lun->capacity.nsec);
2355 if (lun->removable)
2356 disk->flags |= GENHD_FL_REMOVABLE;
2358 add_disk(disk);
2360 return 0;
2362 err_blkqinit:
2363 put_disk(disk);
2364 err_diskalloc:
2365 ub_id_put(lun->id);
2366 err_id:
2367 kfree(lun);
2368 err_alloc:
2369 return rc;
2372 static void ub_disconnect(struct usb_interface *intf)
2374 struct ub_dev *sc = usb_get_intfdata(intf);
2375 struct ub_lun *lun;
2376 unsigned long flags;
2379 * Prevent ub_bd_release from pulling the rug from under us.
2380 * XXX This is starting to look like a kref.
2381 * XXX Why not to take this ref at probe time?
2383 spin_lock_irqsave(&ub_lock, flags);
2384 sc->openc++;
2385 spin_unlock_irqrestore(&ub_lock, flags);
2388 * Fence stall clearings, operations triggered by unlinkings and so on.
2389 * We do not attempt to unlink any URBs, because we do not trust the
2390 * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway.
2392 atomic_set(&sc->poison, 1);
2395 * Wait for reset to end, if any.
2397 wait_event(sc->reset_wait, !sc->reset);
2400 * Blow away queued commands.
2402 * Actually, this never works, because before we get here
2403 * the HCD terminates outstanding URB(s). It causes our
2404 * SCSI command queue to advance, commands fail to submit,
2405 * and the whole queue drains. So, we just use this code to
2406 * print warnings.
2408 spin_lock_irqsave(sc->lock, flags);
2410 struct ub_scsi_cmd *cmd;
2411 int cnt = 0;
2412 while ((cmd = ub_cmdq_peek(sc)) != NULL) {
2413 cmd->error = -ENOTCONN;
2414 cmd->state = UB_CMDST_DONE;
2415 ub_cmdq_pop(sc);
2416 (*cmd->done)(sc, cmd);
2417 cnt++;
2419 if (cnt != 0) {
2420 printk(KERN_WARNING "%s: "
2421 "%d was queued after shutdown\n", sc->name, cnt);
2424 spin_unlock_irqrestore(sc->lock, flags);
2427 * Unregister the upper layer.
2429 list_for_each_entry(lun, &sc->luns, link) {
2430 del_gendisk(lun->disk);
2432 * I wish I could do:
2433 * queue_flag_set(QUEUE_FLAG_DEAD, q);
2434 * As it is, we rely on our internal poisoning and let
2435 * the upper levels to spin furiously failing all the I/O.
2440 * Testing for -EINPROGRESS is always a bug, so we are bending
2441 * the rules a little.
2443 spin_lock_irqsave(sc->lock, flags);
2444 if (sc->work_urb.status == -EINPROGRESS) { /* janitors: ignore */
2445 printk(KERN_WARNING "%s: "
2446 "URB is active after disconnect\n", sc->name);
2448 spin_unlock_irqrestore(sc->lock, flags);
2451 * There is virtually no chance that other CPU runs a timeout so long
2452 * after ub_urb_complete should have called del_timer, but only if HCD
2453 * didn't forget to deliver a callback on unlink.
2455 del_timer_sync(&sc->work_timer);
2458 * At this point there must be no commands coming from anyone
2459 * and no URBs left in transit.
2462 ub_put(sc);
2465 static struct usb_driver ub_driver = {
2466 .name = "ub",
2467 .probe = ub_probe,
2468 .disconnect = ub_disconnect,
2469 .id_table = ub_usb_ids,
2470 .pre_reset = ub_pre_reset,
2471 .post_reset = ub_post_reset,
2474 static int __init ub_init(void)
2476 int rc;
2477 int i;
2479 for (i = 0; i < UB_QLOCK_NUM; i++)
2480 spin_lock_init(&ub_qlockv[i]);
2482 if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
2483 goto err_regblkdev;
2485 if ((rc = usb_register(&ub_driver)) != 0)
2486 goto err_register;
2488 usb_usual_set_present(USB_US_TYPE_UB);
2489 return 0;
2491 err_register:
2492 unregister_blkdev(UB_MAJOR, DRV_NAME);
2493 err_regblkdev:
2494 return rc;
2497 static void __exit ub_exit(void)
2499 usb_deregister(&ub_driver);
2501 unregister_blkdev(UB_MAJOR, DRV_NAME);
2502 usb_usual_clear_present(USB_US_TYPE_UB);
2505 module_init(ub_init);
2506 module_exit(ub_exit);
2508 MODULE_LICENSE("GPL");