OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts
[linux-2.6/cjktty.git] / drivers / media / radio / radio-typhoon.c
blob8dbbf08f22077ad2b7c84e8e3992d3b33eab88e7
1 /* Typhoon Radio Card driver for radio support
2 * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
4 * Notes on the hardware
6 * This card has two output sockets, one for speakers and one for line.
7 * The speaker output has volume control, but only in four discrete
8 * steps. The line output has neither volume control nor mute.
10 * The card has auto-stereo according to its manual, although it all
11 * sounds mono to me (even with the Win/DOS drivers). Maybe it's my
12 * antenna - I really don't know for sure.
14 * Frequency control is done digitally.
16 * Volume control is done digitally, but there are only four different
17 * possible values. So you should better always turn the volume up and
18 * use line control. I got the best results by connecting line output
19 * to the sound card microphone input. For such a configuration the
20 * volume control has no effect, since volume control only influences
21 * the speaker output.
23 * There is no explicit mute/unmute. So I set the radio frequency to a
24 * value where I do expect just noise and turn the speaker volume down.
25 * The frequency change is necessary since the card never seems to be
26 * completely silent.
28 * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
31 #include <linux/module.h> /* Modules */
32 #include <linux/init.h> /* Initdata */
33 #include <linux/ioport.h> /* request_region */
34 #include <linux/version.h> /* for KERNEL_VERSION MACRO */
35 #include <linux/videodev2.h> /* kernel radio structs */
36 #include <linux/io.h> /* outb, outb_p */
37 #include <media/v4l2-device.h>
38 #include <media/v4l2-ioctl.h>
40 MODULE_AUTHOR("Dr. Henrik Seidel");
41 MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
42 MODULE_LICENSE("GPL");
44 #ifndef CONFIG_RADIO_TYPHOON_PORT
45 #define CONFIG_RADIO_TYPHOON_PORT -1
46 #endif
48 #ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ
49 #define CONFIG_RADIO_TYPHOON_MUTEFREQ 0
50 #endif
52 static int io = CONFIG_RADIO_TYPHOON_PORT;
53 static int radio_nr = -1;
55 module_param(io, int, 0);
56 MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)");
58 module_param(radio_nr, int, 0);
60 static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
61 module_param(mutefreq, ulong, 0);
62 MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
64 #define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
66 #define BANNER "Typhoon Radio Card driver v0.1.1\n"
68 struct typhoon {
69 struct v4l2_device v4l2_dev;
70 struct video_device vdev;
71 int io;
72 int curvol;
73 int muted;
74 unsigned long curfreq;
75 unsigned long mutefreq;
76 struct mutex lock;
79 static struct typhoon typhoon_card;
81 static void typhoon_setvol_generic(struct typhoon *dev, int vol)
83 mutex_lock(&dev->lock);
84 vol >>= 14; /* Map 16 bit to 2 bit */
85 vol &= 3;
86 outb_p(vol / 2, dev->io); /* Set the volume, high bit. */
87 outb_p(vol % 2, dev->io + 2); /* Set the volume, low bit. */
88 mutex_unlock(&dev->lock);
91 static int typhoon_setfreq_generic(struct typhoon *dev,
92 unsigned long frequency)
94 unsigned long outval;
95 unsigned long x;
98 * The frequency transfer curve is not linear. The best fit I could
99 * get is
101 * outval = -155 + exp((f + 15.55) * 0.057))
103 * where frequency f is in MHz. Since we don't have exp in the kernel,
104 * I approximate this function by a third order polynomial.
108 mutex_lock(&dev->lock);
109 x = frequency / 160;
110 outval = (x * x + 2500) / 5000;
111 outval = (outval * x + 5000) / 10000;
112 outval -= (10 * x * x + 10433) / 20866;
113 outval += 4 * x - 11505;
115 outb_p((outval >> 8) & 0x01, dev->io + 4);
116 outb_p(outval >> 9, dev->io + 6);
117 outb_p(outval & 0xff, dev->io + 8);
118 mutex_unlock(&dev->lock);
120 return 0;
123 static int typhoon_setfreq(struct typhoon *dev, unsigned long frequency)
125 typhoon_setfreq_generic(dev, frequency);
126 dev->curfreq = frequency;
127 return 0;
130 static void typhoon_mute(struct typhoon *dev)
132 if (dev->muted == 1)
133 return;
134 typhoon_setvol_generic(dev, 0);
135 typhoon_setfreq_generic(dev, dev->mutefreq);
136 dev->muted = 1;
139 static void typhoon_unmute(struct typhoon *dev)
141 if (dev->muted == 0)
142 return;
143 typhoon_setfreq_generic(dev, dev->curfreq);
144 typhoon_setvol_generic(dev, dev->curvol);
145 dev->muted = 0;
148 static int typhoon_setvol(struct typhoon *dev, int vol)
150 if (dev->muted && vol != 0) { /* user is unmuting the card */
151 dev->curvol = vol;
152 typhoon_unmute(dev);
153 return 0;
155 if (vol == dev->curvol) /* requested volume == current */
156 return 0;
158 if (vol == 0) { /* volume == 0 means mute the card */
159 typhoon_mute(dev);
160 dev->curvol = vol;
161 return 0;
163 typhoon_setvol_generic(dev, vol);
164 dev->curvol = vol;
165 return 0;
168 static int vidioc_querycap(struct file *file, void *priv,
169 struct v4l2_capability *v)
171 strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
172 strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
173 strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
174 v->version = RADIO_VERSION;
175 v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
176 return 0;
179 static int vidioc_g_tuner(struct file *file, void *priv,
180 struct v4l2_tuner *v)
182 if (v->index > 0)
183 return -EINVAL;
185 strlcpy(v->name, "FM", sizeof(v->name));
186 v->type = V4L2_TUNER_RADIO;
187 v->rangelow = 87.5 * 16000;
188 v->rangehigh = 108 * 16000;
189 v->rxsubchans = V4L2_TUNER_SUB_MONO;
190 v->capability = V4L2_TUNER_CAP_LOW;
191 v->audmode = V4L2_TUNER_MODE_MONO;
192 v->signal = 0xFFFF; /* We can't get the signal strength */
193 return 0;
196 static int vidioc_s_tuner(struct file *file, void *priv,
197 struct v4l2_tuner *v)
199 return v->index ? -EINVAL : 0;
202 static int vidioc_g_frequency(struct file *file, void *priv,
203 struct v4l2_frequency *f)
205 struct typhoon *dev = video_drvdata(file);
207 if (f->tuner != 0)
208 return -EINVAL;
209 f->type = V4L2_TUNER_RADIO;
210 f->frequency = dev->curfreq;
211 return 0;
214 static int vidioc_s_frequency(struct file *file, void *priv,
215 struct v4l2_frequency *f)
217 struct typhoon *dev = video_drvdata(file);
219 if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
220 return -EINVAL;
221 dev->curfreq = f->frequency;
222 typhoon_setfreq(dev, dev->curfreq);
223 return 0;
226 static int vidioc_queryctrl(struct file *file, void *priv,
227 struct v4l2_queryctrl *qc)
229 switch (qc->id) {
230 case V4L2_CID_AUDIO_MUTE:
231 return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
232 case V4L2_CID_AUDIO_VOLUME:
233 return v4l2_ctrl_query_fill(qc, 0, 65535, 16384, 65535);
235 return -EINVAL;
238 static int vidioc_g_ctrl(struct file *file, void *priv,
239 struct v4l2_control *ctrl)
241 struct typhoon *dev = video_drvdata(file);
243 switch (ctrl->id) {
244 case V4L2_CID_AUDIO_MUTE:
245 ctrl->value = dev->muted;
246 return 0;
247 case V4L2_CID_AUDIO_VOLUME:
248 ctrl->value = dev->curvol;
249 return 0;
251 return -EINVAL;
254 static int vidioc_s_ctrl (struct file *file, void *priv,
255 struct v4l2_control *ctrl)
257 struct typhoon *dev = video_drvdata(file);
259 switch (ctrl->id) {
260 case V4L2_CID_AUDIO_MUTE:
261 if (ctrl->value)
262 typhoon_mute(dev);
263 else
264 typhoon_unmute(dev);
265 return 0;
266 case V4L2_CID_AUDIO_VOLUME:
267 typhoon_setvol(dev, ctrl->value);
268 return 0;
270 return -EINVAL;
273 static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
275 *i = 0;
276 return 0;
279 static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
281 return i ? -EINVAL : 0;
284 static int vidioc_g_audio(struct file *file, void *priv,
285 struct v4l2_audio *a)
287 a->index = 0;
288 strlcpy(a->name, "Radio", sizeof(a->name));
289 a->capability = V4L2_AUDCAP_STEREO;
290 return 0;
293 static int vidioc_s_audio(struct file *file, void *priv,
294 struct v4l2_audio *a)
296 return a->index ? -EINVAL : 0;
299 static int vidioc_log_status(struct file *file, void *priv)
301 struct typhoon *dev = video_drvdata(file);
302 struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
304 v4l2_info(v4l2_dev, BANNER);
305 #ifdef MODULE
306 v4l2_info(v4l2_dev, "Load type: Driver loaded as a module\n\n");
307 #else
308 v4l2_info(v4l2_dev, "Load type: Driver compiled into kernel\n\n");
309 #endif
310 v4l2_info(v4l2_dev, "frequency = %lu kHz\n", dev->curfreq >> 4);
311 v4l2_info(v4l2_dev, "volume = %d\n", dev->curvol);
312 v4l2_info(v4l2_dev, "mute = %s\n", dev->muted ? "on" : "off");
313 v4l2_info(v4l2_dev, "io = 0x%x\n", dev->io);
314 v4l2_info(v4l2_dev, "mute frequency = %lu kHz\n", dev->mutefreq >> 4);
315 return 0;
318 static const struct v4l2_file_operations typhoon_fops = {
319 .owner = THIS_MODULE,
320 .unlocked_ioctl = video_ioctl2,
323 static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
324 .vidioc_log_status = vidioc_log_status,
325 .vidioc_querycap = vidioc_querycap,
326 .vidioc_g_tuner = vidioc_g_tuner,
327 .vidioc_s_tuner = vidioc_s_tuner,
328 .vidioc_g_audio = vidioc_g_audio,
329 .vidioc_s_audio = vidioc_s_audio,
330 .vidioc_g_input = vidioc_g_input,
331 .vidioc_s_input = vidioc_s_input,
332 .vidioc_g_frequency = vidioc_g_frequency,
333 .vidioc_s_frequency = vidioc_s_frequency,
334 .vidioc_queryctrl = vidioc_queryctrl,
335 .vidioc_g_ctrl = vidioc_g_ctrl,
336 .vidioc_s_ctrl = vidioc_s_ctrl,
339 static int __init typhoon_init(void)
341 struct typhoon *dev = &typhoon_card;
342 struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
343 int res;
345 strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
346 dev->io = io;
348 if (dev->io == -1) {
349 v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
350 return -EINVAL;
353 if (mutefreq < 87000 || mutefreq > 108500) {
354 v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
355 v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
356 return -EINVAL;
358 dev->curfreq = dev->mutefreq = mutefreq << 4;
360 mutex_init(&dev->lock);
361 if (!request_region(dev->io, 8, "typhoon")) {
362 v4l2_err(v4l2_dev, "port 0x%x already in use\n",
363 dev->io);
364 return -EBUSY;
367 res = v4l2_device_register(NULL, v4l2_dev);
368 if (res < 0) {
369 release_region(dev->io, 8);
370 v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
371 return res;
373 v4l2_info(v4l2_dev, BANNER);
375 strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
376 dev->vdev.v4l2_dev = v4l2_dev;
377 dev->vdev.fops = &typhoon_fops;
378 dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
379 dev->vdev.release = video_device_release_empty;
380 video_set_drvdata(&dev->vdev, dev);
382 /* mute card - prevents noisy bootups */
383 typhoon_mute(dev);
385 if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
386 v4l2_device_unregister(&dev->v4l2_dev);
387 release_region(dev->io, 8);
388 return -EINVAL;
390 v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
391 v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
393 return 0;
396 static void __exit typhoon_exit(void)
398 struct typhoon *dev = &typhoon_card;
400 video_unregister_device(&dev->vdev);
401 v4l2_device_unregister(&dev->v4l2_dev);
402 release_region(dev->io, 8);
405 module_init(typhoon_init);
406 module_exit(typhoon_exit);