mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.
[linux-2.6/cjktty.git] / include / linux / printk.h
blob0525927f203f0f6756773079ac6fdeb2134ea3f6
1 #ifndef __KERNEL_PRINTK__
2 #define __KERNEL_PRINTK__
4 #include <linux/init.h>
6 extern const char linux_banner[];
7 extern const char linux_proc_banner[];
9 #define KERN_EMERG "<0>" /* system is unusable */
10 #define KERN_ALERT "<1>" /* action must be taken immediately */
11 #define KERN_CRIT "<2>" /* critical conditions */
12 #define KERN_ERR "<3>" /* error conditions */
13 #define KERN_WARNING "<4>" /* warning conditions */
14 #define KERN_NOTICE "<5>" /* normal but significant condition */
15 #define KERN_INFO "<6>" /* informational */
16 #define KERN_DEBUG "<7>" /* debug-level messages */
18 /* Use the default kernel loglevel */
19 #define KERN_DEFAULT "<d>"
21 * Annotation for a "continued" line of log printout (only done after a
22 * line that had no enclosing \n). Only to be used by core/arch code
23 * during early bootup (a continued line is not SMP-safe otherwise).
25 #define KERN_CONT "<c>"
27 extern int console_printk[];
29 #define console_loglevel (console_printk[0])
30 #define default_message_loglevel (console_printk[1])
31 #define minimum_console_loglevel (console_printk[2])
32 #define default_console_loglevel (console_printk[3])
34 static inline void console_silent(void)
36 console_loglevel = 0;
39 static inline void console_verbose(void)
41 if (console_loglevel)
42 console_loglevel = 15;
45 struct va_format {
46 const char *fmt;
47 va_list *va;
51 * FW_BUG
52 * Add this to a message where you are sure the firmware is buggy or behaves
53 * really stupid or out of spec. Be aware that the responsible BIOS developer
54 * should be able to fix this issue or at least get a concrete idea of the
55 * problem by reading your message without the need of looking at the kernel
56 * code.
58 * Use it for definite and high priority BIOS bugs.
60 * FW_WARN
61 * Use it for not that clear (e.g. could the kernel messed up things already?)
62 * and medium priority BIOS bugs.
64 * FW_INFO
65 * Use this one if you want to tell the user or vendor about something
66 * suspicious, but generally harmless related to the firmware.
68 * Use it for information or very low priority BIOS bugs.
70 #define FW_BUG "[Firmware Bug]: "
71 #define FW_WARN "[Firmware Warn]: "
72 #define FW_INFO "[Firmware Info]: "
75 * HW_ERR
76 * Add this to a message for hardware errors, so that user can report
77 * it to hardware vendor instead of LKML or software vendor.
79 #define HW_ERR "[Hardware Error]: "
82 * Dummy printk for disabled debugging statements to use whilst maintaining
83 * gcc's format and side-effect checking.
85 static inline __printf(1, 2)
86 int no_printk(const char *fmt, ...)
88 return 0;
91 extern asmlinkage __printf(1, 2)
92 void early_printk(const char *fmt, ...);
94 extern int printk_needs_cpu(int cpu);
95 extern void printk_tick(void);
97 #ifdef CONFIG_PRINTK
98 asmlinkage __printf(1, 0)
99 int vprintk(const char *fmt, va_list args);
100 asmlinkage __printf(1, 2) __cold
101 int printk(const char *fmt, ...);
104 * Special printk facility for scheduler use only, _DO_NOT_USE_ !
106 __printf(1, 2) __cold int printk_sched(const char *fmt, ...);
109 * Please don't use printk_ratelimit(), because it shares ratelimiting state
110 * with all other unrelated printk_ratelimit() callsites. Instead use
111 * printk_ratelimited() or plain old __ratelimit().
113 extern int __printk_ratelimit(const char *func);
114 #define printk_ratelimit() __printk_ratelimit(__func__)
115 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
116 unsigned int interval_msec);
118 extern int printk_delay_msec;
119 extern int dmesg_restrict;
120 extern int kptr_restrict;
122 void log_buf_kexec_setup(void);
123 void __init setup_log_buf(int early);
124 #else
125 static inline __printf(1, 0)
126 int vprintk(const char *s, va_list args)
128 return 0;
130 static inline __printf(1, 2) __cold
131 int printk(const char *s, ...)
133 return 0;
135 static inline __printf(1, 2) __cold
136 int printk_sched(const char *s, ...)
138 return 0;
140 static inline int printk_ratelimit(void)
142 return 0;
144 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
145 unsigned int interval_msec)
147 return false;
150 static inline void log_buf_kexec_setup(void)
154 static inline void setup_log_buf(int early)
157 #endif
159 extern void dump_stack(void) __cold;
161 #ifndef pr_fmt
162 #define pr_fmt(fmt) fmt
163 #endif
165 #define pr_emerg(fmt, ...) \
166 printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
167 #define pr_alert(fmt, ...) \
168 printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
169 #define pr_crit(fmt, ...) \
170 printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
171 #define pr_err(fmt, ...) \
172 printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
173 #define pr_warning(fmt, ...) \
174 printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
175 #define pr_warn pr_warning
176 #define pr_notice(fmt, ...) \
177 printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
178 #define pr_info(fmt, ...) \
179 printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
180 #define pr_cont(fmt, ...) \
181 printk(KERN_CONT fmt, ##__VA_ARGS__)
183 /* pr_devel() should produce zero code unless DEBUG is defined */
184 #ifdef DEBUG
185 #define pr_devel(fmt, ...) \
186 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
187 #else
188 #define pr_devel(fmt, ...) \
189 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
190 #endif
192 /* If you are writing a driver, please use dev_dbg instead */
193 #if defined(CONFIG_DYNAMIC_DEBUG)
194 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
195 #define pr_debug(fmt, ...) \
196 dynamic_pr_debug(fmt, ##__VA_ARGS__)
197 #elif defined(DEBUG)
198 #define pr_debug(fmt, ...) \
199 printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
200 #else
201 #define pr_debug(fmt, ...) \
202 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
203 #endif
206 * Print a one-time message (analogous to WARN_ONCE() et al):
209 #ifdef CONFIG_PRINTK
210 #define printk_once(fmt, ...) \
211 ({ \
212 static bool __print_once; \
214 if (!__print_once) { \
215 __print_once = true; \
216 printk(fmt, ##__VA_ARGS__); \
219 #else
220 #define printk_once(fmt, ...) \
221 no_printk(fmt, ##__VA_ARGS__)
222 #endif
224 #define pr_emerg_once(fmt, ...) \
225 printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
226 #define pr_alert_once(fmt, ...) \
227 printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
228 #define pr_crit_once(fmt, ...) \
229 printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
230 #define pr_err_once(fmt, ...) \
231 printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
232 #define pr_warn_once(fmt, ...) \
233 printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
234 #define pr_notice_once(fmt, ...) \
235 printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
236 #define pr_info_once(fmt, ...) \
237 printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
238 #define pr_cont_once(fmt, ...) \
239 printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
240 /* If you are writing a driver, please use dev_dbg instead */
241 #if defined(DEBUG)
242 #define pr_debug_once(fmt, ...) \
243 printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
244 #else
245 #define pr_debug_once(fmt, ...) \
246 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
247 #endif
250 * ratelimited messages with local ratelimit_state,
251 * no local ratelimit_state used in the !PRINTK case
253 #ifdef CONFIG_PRINTK
254 #define printk_ratelimited(fmt, ...) \
255 ({ \
256 static DEFINE_RATELIMIT_STATE(_rs, \
257 DEFAULT_RATELIMIT_INTERVAL, \
258 DEFAULT_RATELIMIT_BURST); \
260 if (__ratelimit(&_rs)) \
261 printk(fmt, ##__VA_ARGS__); \
263 #else
264 #define printk_ratelimited(fmt, ...) \
265 no_printk(fmt, ##__VA_ARGS__)
266 #endif
268 #define pr_emerg_ratelimited(fmt, ...) \
269 printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
270 #define pr_alert_ratelimited(fmt, ...) \
271 printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
272 #define pr_crit_ratelimited(fmt, ...) \
273 printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
274 #define pr_err_ratelimited(fmt, ...) \
275 printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
276 #define pr_warn_ratelimited(fmt, ...) \
277 printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
278 #define pr_notice_ratelimited(fmt, ...) \
279 printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
280 #define pr_info_ratelimited(fmt, ...) \
281 printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
282 /* no pr_cont_ratelimited, don't do that... */
283 /* If you are writing a driver, please use dev_dbg instead */
284 #if defined(DEBUG)
285 #define pr_debug_ratelimited(fmt, ...) \
286 printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
287 #else
288 #define pr_debug_ratelimited(fmt, ...) \
289 no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
290 #endif
292 enum {
293 DUMP_PREFIX_NONE,
294 DUMP_PREFIX_ADDRESS,
295 DUMP_PREFIX_OFFSET
297 extern void hex_dump_to_buffer(const void *buf, size_t len,
298 int rowsize, int groupsize,
299 char *linebuf, size_t linebuflen, bool ascii);
300 #ifdef CONFIG_PRINTK
301 extern void print_hex_dump(const char *level, const char *prefix_str,
302 int prefix_type, int rowsize, int groupsize,
303 const void *buf, size_t len, bool ascii);
304 extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
305 const void *buf, size_t len);
306 #else
307 static inline void print_hex_dump(const char *level, const char *prefix_str,
308 int prefix_type, int rowsize, int groupsize,
309 const void *buf, size_t len, bool ascii)
312 static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
313 const void *buf, size_t len)
317 #endif
319 #endif