bnx2x: Handle a rarely missed interrupt
[linux-2.6/cjktty.git] / drivers / pinctrl / pinctrl-samsung.h
blobb8956934cda683c8ecc99f8c8a64b1b0a27bf546
1 /*
2 * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
4 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 * Copyright (c) 2012 Linaro Ltd
7 * http://www.linaro.org
9 * Author: Thomas Abraham <thomas.ab@samsung.com>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
17 #ifndef __PINCTRL_SAMSUNG_H
18 #define __PINCTRL_SAMSUNG_H
20 #include <linux/pinctrl/pinctrl.h>
21 #include <linux/pinctrl/pinmux.h>
22 #include <linux/pinctrl/pinconf.h>
23 #include <linux/pinctrl/consumer.h>
24 #include <linux/pinctrl/machine.h>
26 /* register offsets within a pin bank */
27 #define DAT_REG 0x4
28 #define PUD_REG 0x8
29 #define DRV_REG 0xC
30 #define CONPDN_REG 0x10
31 #define PUDPDN_REG 0x14
33 /* pinmux function number for pin as gpio output line */
34 #define FUNC_OUTPUT 0x1
36 /**
37 * enum pincfg_type - possible pin configuration types supported.
38 * @PINCFG_TYPE_PUD: Pull up/down configuration.
39 * @PINCFG_TYPE_DRV: Drive strength configuration.
40 * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
41 * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
43 enum pincfg_type {
44 PINCFG_TYPE_PUD,
45 PINCFG_TYPE_DRV,
46 PINCFG_TYPE_CON_PDN,
47 PINCFG_TYPE_PUD_PDN,
51 * pin configuration (pull up/down and drive strength) type and its value are
52 * packed together into a 16-bits. The upper 8-bits represent the configuration
53 * type and the lower 8-bits hold the value of the configuration type.
55 #define PINCFG_TYPE_MASK 0xFF
56 #define PINCFG_VALUE_SHIFT 8
57 #define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
58 #define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
59 #define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
60 #define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
61 PINCFG_VALUE_SHIFT)
62 /**
63 * enum eint_type - possible external interrupt types.
64 * @EINT_TYPE_NONE: bank does not support external interrupts
65 * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
66 * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
68 * Samsung GPIO controller groups all the available pins into banks. The pins
69 * in a pin bank can support external gpio interrupts or external wakeup
70 * interrupts or no interrupts at all. From a software perspective, the only
71 * difference between external gpio and external wakeup interrupts is that
72 * the wakeup interrupts can additionally wakeup the system if it is in
73 * suspended state.
75 enum eint_type {
76 EINT_TYPE_NONE,
77 EINT_TYPE_GPIO,
78 EINT_TYPE_WKUP,
81 /* maximum length of a pin in pin descriptor (example: "gpa0-0") */
82 #define PIN_NAME_LENGTH 10
84 #define PIN_GROUP(n, p, f) \
85 { \
86 .name = n, \
87 .pins = p, \
88 .num_pins = ARRAY_SIZE(p), \
89 .func = f \
92 #define PMX_FUNC(n, g) \
93 { \
94 .name = n, \
95 .groups = g, \
96 .num_groups = ARRAY_SIZE(g), \
99 struct samsung_pinctrl_drv_data;
102 * struct samsung_pin_bank: represent a controller pin-bank.
103 * @reg_offset: starting offset of the pin-bank registers.
104 * @pin_base: starting pin number of the bank.
105 * @nr_pins: number of pins included in this bank.
106 * @func_width: width of the function selector bit field.
107 * @pud_width: width of the pin pull up/down selector bit field.
108 * @drv_width: width of the pin driver strength selector bit field.
109 * @conpdn_width: width of the sleep mode function selector bin field.
110 * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
111 * @eint_type: type of the external interrupt supported by the bank.
112 * @irq_base: starting controller local irq number of the bank.
113 * @name: name to be prefixed for each pin in this pin bank.
115 struct samsung_pin_bank {
116 u32 pctl_offset;
117 u32 pin_base;
118 u8 nr_pins;
119 u8 func_width;
120 u8 pud_width;
121 u8 drv_width;
122 u8 conpdn_width;
123 u8 pudpdn_width;
124 enum eint_type eint_type;
125 u32 irq_base;
126 char *name;
130 * struct samsung_pin_ctrl: represent a pin controller.
131 * @pin_banks: list of pin banks included in this controller.
132 * @nr_banks: number of pin banks.
133 * @base: starting system wide pin number.
134 * @nr_pins: number of pins supported by the controller.
135 * @nr_gint: number of external gpio interrupts supported.
136 * @nr_wint: number of external wakeup interrupts supported.
137 * @geint_con: offset of the ext-gpio controller registers.
138 * @geint_mask: offset of the ext-gpio interrupt mask registers.
139 * @geint_pend: offset of the ext-gpio interrupt pending registers.
140 * @weint_con: offset of the ext-wakeup controller registers.
141 * @weint_mask: offset of the ext-wakeup interrupt mask registers.
142 * @weint_pend: offset of the ext-wakeup interrupt pending registers.
143 * @svc: offset of the interrupt service register.
144 * @eint_gpio_init: platform specific callback to setup the external gpio
145 * interrupts for the controller.
146 * @eint_wkup_init: platform specific callback to setup the external wakeup
147 * interrupts for the controller.
148 * @label: for debug information.
150 struct samsung_pin_ctrl {
151 struct samsung_pin_bank *pin_banks;
152 u32 nr_banks;
154 u32 base;
155 u32 nr_pins;
156 u32 nr_gint;
157 u32 nr_wint;
159 u32 geint_con;
160 u32 geint_mask;
161 u32 geint_pend;
163 u32 weint_con;
164 u32 weint_mask;
165 u32 weint_pend;
167 u32 svc;
169 int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
170 int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
171 char *label;
175 * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
176 * @virt_base: register base address of the controller.
177 * @dev: device instance representing the controller.
178 * @irq: interrpt number used by the controller to notify gpio interrupts.
179 * @ctrl: pin controller instance managed by the driver.
180 * @pctl: pin controller descriptor registered with the pinctrl subsystem.
181 * @pctl_dev: cookie representing pinctrl device instance.
182 * @pin_groups: list of pin groups available to the driver.
183 * @nr_groups: number of such pin groups.
184 * @pmx_functions: list of pin functions available to the driver.
185 * @nr_function: number of such pin functions.
186 * @gc: gpio_chip instance registered with gpiolib.
187 * @grange: linux gpio pin range supported by this controller.
189 struct samsung_pinctrl_drv_data {
190 void __iomem *virt_base;
191 struct device *dev;
192 int irq;
194 struct samsung_pin_ctrl *ctrl;
195 struct pinctrl_desc pctl;
196 struct pinctrl_dev *pctl_dev;
198 const struct samsung_pin_group *pin_groups;
199 unsigned int nr_groups;
200 const struct samsung_pmx_func *pmx_functions;
201 unsigned int nr_functions;
203 struct irq_domain *gpio_irqd;
204 struct irq_domain *wkup_irqd;
206 struct gpio_chip *gc;
207 struct pinctrl_gpio_range grange;
211 * struct samsung_pin_group: represent group of pins of a pinmux function.
212 * @name: name of the pin group, used to lookup the group.
213 * @pins: the pins included in this group.
214 * @num_pins: number of pins included in this group.
215 * @func: the function number to be programmed when selected.
217 struct samsung_pin_group {
218 const char *name;
219 const unsigned int *pins;
220 u8 num_pins;
221 u8 func;
225 * struct samsung_pmx_func: represent a pin function.
226 * @name: name of the pin function, used to lookup the function.
227 * @groups: one or more names of pin groups that provide this function.
228 * @num_groups: number of groups included in @groups.
230 struct samsung_pmx_func {
231 const char *name;
232 const char **groups;
233 u8 num_groups;
236 /* list of all exported SoC specific data */
237 extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
239 #endif /* __PINCTRL_SAMSUNG_H */