at91: at91sam9g20ek modify dual slot evaluation kit

[linux-2.6/cjktty.git] / arch / arm / plat-omap / fb.c

/*
 * File: arch/arm/plat-omap/fb.c
 *
 * Framebuffer device registration for TI OMAP platforms
 *
 * Copyright (C) 2006 Nokia Corporation
 * Author: Imre Deak <imre.deak@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <linux/io.h>

#include <mach/hardware.h>
#include <asm/mach/map.h>

#include <mach/board.h>
#include <mach/sram.h>
#include <mach/omapfb.h>

#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)

static struct omapfb_platform_data omapfb_config;
static int config_invalid;
static int configured_regions;

static u64 omap_fb_dma_mask = ~(u32)0;

static struct platform_device omap_fb_device = {
        .name           = "omapfb",
        .id             = -1,
        .dev = {
                .dma_mask               = &omap_fb_dma_mask,
                .coherent_dma_mask      = ~(u32)0,
                .platform_data          = &omapfb_config,
        },
        .num_resources = 0,
};

static inline int ranges_overlap(unsigned long start1, unsigned long size1,
                                 unsigned long start2, unsigned long size2)
{
        return (start1 >= start2 && start1 < start2 + size2) ||
               (start2 >= start1 && start2 < start1 + size1);
}

static inline int range_included(unsigned long start1, unsigned long size1,
                                 unsigned long start2, unsigned long size2)
{
        return start1 >= start2 && start1 + size1 <= start2 + size2;
}


/* Check if there is an overlapping region. */
static int fbmem_region_reserved(unsigned long start, size_t size)
{
        struct omapfb_mem_region *rg;
        int i;

        rg = &omapfb_config.mem_desc.region[0];
        for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
                if (!rg->paddr)
                        /* Empty slot. */
                        continue;
                if (ranges_overlap(start, size, rg->paddr, rg->size))
                        return 1;
        }
        return 0;
}

/*
 * Get the region_idx`th region from board config/ATAG and convert it to
 * our internal format.
 */
static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
{
        const struct omap_fbmem_config  *conf;
        u32                             paddr;

        conf = omap_get_nr_config(OMAP_TAG_FBMEM,
                                  struct omap_fbmem_config, region_idx);
        if (conf == NULL)
                return -ENOENT;

        paddr = conf->start;
        /*
         * Low bits encode the page allocation mode, if high bits
         * are zero. Otherwise we need a page aligned fixed
         * address.
         */
        memset(rg, 0, sizeof(*rg));
        rg->type = paddr & ~PAGE_MASK;
        rg->paddr = paddr & PAGE_MASK;
        rg->size = PAGE_ALIGN(conf->size);
        return 0;
}

static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
                                  unsigned long mem_start,
                                  unsigned long mem_size)
{
        /*
         * Check if the configuration specifies the type explicitly.
         * type = 0 && paddr = 0, a default don't care case maps to
         * the SDRAM type.
         */
        if (rg->type || (!rg->type && !rg->paddr))
                return 0;
        if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
                rg->type = mem_type;
                return 0;
        }
        /* Can't determine it. */
        return -1;
}

static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
                              unsigned long start_avail, unsigned size_avail)
{
        unsigned long   paddr = rg->paddr;
        size_t          size = rg->size;

        if (rg->type > OMAPFB_MEMTYPE_MAX) {
                printk(KERN_ERR
                        "Invalid start address for FB region %d\n", region_idx);
                return -EINVAL;
        }

        if (!rg->size) {
                printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
                return -EINVAL;
        }

        if (!paddr)
                /* Allocate this dynamically, leave paddr 0 for now. */
                return 0;

        /*
         * Fixed region for the given RAM range. Check if it's already
         * reserved by the FB code or someone else.
         */
        if (fbmem_region_reserved(paddr, size) ||
            !range_included(paddr, size, start_avail, size_avail)) {
                printk(KERN_ERR "Trying to use reserved memory "
                        "for FB region %d\n", region_idx);
                return -EINVAL;
        }

        return 0;
}

/*
 * Called from map_io. We need to call to this early enough so that we
 * can reserve the fixed SDRAM regions before VM could get hold of them.
 */
void __init omapfb_reserve_sdram(void)
{
        struct bootmem_data     *bdata;
        unsigned long           sdram_start, sdram_size;
        unsigned long           reserved;
        int                     i;

        if (config_invalid)
                return;

        bdata = NODE_DATA(0)->bdata;
        sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
        sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
        reserved = 0;
        for (i = 0; ; i++) {
                struct omapfb_mem_region        rg;

                if (get_fbmem_region(i, &rg) < 0)
                        break;
                if (i == OMAPFB_PLANE_NUM) {
                        printk(KERN_ERR
                                "Extraneous FB mem configuration entries\n");
                        config_invalid = 1;
                        return;
                }
                /* Check if it's our memory type. */
                if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
                                          sdram_start, sdram_size) < 0 ||
                    (rg.type != OMAPFB_MEMTYPE_SDRAM))
                        continue;
                BUG_ON(omapfb_config.mem_desc.region[i].size);
                if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
                        config_invalid = 1;
                        return;
                }
                if (rg.paddr) {
                        reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
                        reserved += rg.size;
                }
                omapfb_config.mem_desc.region[i] = rg;
                configured_regions++;
        }
        omapfb_config.mem_desc.region_cnt = i;
        if (reserved)
                pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
                         reserved);
}

/*
 * Called at sram init time, before anything is pushed to the SRAM stack.
 * Because of the stack scheme, we will allocate everything from the
 * start of the lowest address region to the end of SRAM. This will also
 * include padding for page alignment and possible holes between regions.
 *
 * As opposed to the SDRAM case, we'll also do any dynamic allocations at
 * this point, since the driver built as a module would have problem with
 * freeing / reallocating the regions.
 */
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
                                  unsigned long sram_vstart,
                                  unsigned long sram_size,
                                  unsigned long pstart_avail,
                                  unsigned long size_avail)
{
        struct omapfb_mem_region        rg;
        unsigned long                   pend_avail;
        unsigned long                   reserved;
        int                             i;

        if (config_invalid)
                return 0;

        reserved = 0;
        pend_avail = pstart_avail + size_avail;
        for (i = 0; ; i++) {
                if (get_fbmem_region(i, &rg) < 0)
                        break;
                if (i == OMAPFB_PLANE_NUM) {
                        printk(KERN_ERR
                                "Extraneous FB mem configuration entries\n");
                        config_invalid = 1;
                        return 0;
                }

                /* Check if it's our memory type. */
                if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
                                          sram_pstart, sram_size) < 0 ||
                    (rg.type != OMAPFB_MEMTYPE_SRAM))
                        continue;
                BUG_ON(omapfb_config.mem_desc.region[i].size);

                if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
                        config_invalid = 1;
                        return 0;
                }

                if (!rg.paddr) {
                        /* Dynamic allocation */
                        if ((size_avail & PAGE_MASK) < rg.size) {
                                printk("Not enough SRAM for FB region %d\n",
                                        i);
                                config_invalid = 1;
                                return 0;
                        }
                        size_avail = (size_avail - rg.size) & PAGE_MASK;
                        rg.paddr = pstart_avail + size_avail;
                }
                /* Reserve everything above the start of the region. */
                if (pend_avail - rg.paddr > reserved)
                        reserved = pend_avail - rg.paddr;
                size_avail = pend_avail - reserved - pstart_avail;

                /*
                 * We have a kernel mapping for this already, so the
                 * driver won't have to make one.
                 */
                rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
                omapfb_config.mem_desc.region[i] = rg;
                configured_regions++;
        }
        omapfb_config.mem_desc.region_cnt = i;
        if (reserved)
                pr_info("Reserving %lu bytes SRAM for frame buffer\n",
                         reserved);
        return reserved;
}

void omapfb_set_ctrl_platform_data(void *data)
{
        omapfb_config.ctrl_platform_data = data;
}

static inline int omap_init_fb(void)
{
        const struct omap_lcd_config *conf;

        if (config_invalid)
                return 0;
        if (configured_regions != omapfb_config.mem_desc.region_cnt) {
                printk(KERN_ERR "Invalid FB mem configuration entries\n");
                return 0;
        }
        conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
        if (conf == NULL) {
                if (configured_regions)
                        /* FB mem config, but no LCD config? */
                        printk(KERN_ERR "Missing LCD configuration\n");
                return 0;
        }
        omapfb_config.lcd = *conf;

        return platform_device_register(&omap_fb_device);
}

arch_initcall(omap_init_fb);

#else

void omapfb_reserve_sdram(void) {}
unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
                                  unsigned long sram_vstart,
                                  unsigned long sram_size,
                                  unsigned long start_avail,
                                  unsigned long size_avail)
{
        return 0;
}


#endif