bluetooth: Make hci_sock_cleanup() return void
[linux-2.6/cjktty.git] / drivers / cpufreq / cpufreq.c
blob89a29cd9378379a00f80e6899eadbac949f03fde
1 /*
2 * linux/drivers/cpufreq/cpufreq.c
4 * Copyright (C) 2001 Russell King
5 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
7 * Oct 2005 - Ashok Raj <ashok.raj@intel.com>
8 * Added handling for CPU hotplug
9 * Feb 2006 - Jacob Shin <jacob.shin@amd.com>
10 * Fix handling for CPU hotplug -- affected CPUs
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/notifier.h>
22 #include <linux/cpufreq.h>
23 #include <linux/delay.h>
24 #include <linux/interrupt.h>
25 #include <linux/spinlock.h>
26 #include <linux/device.h>
27 #include <linux/slab.h>
28 #include <linux/cpu.h>
29 #include <linux/completion.h>
30 #include <linux/mutex.h>
32 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
33 "cpufreq-core", msg)
35 /**
36 * The "cpufreq driver" - the arch- or hardware-dependent low
37 * level driver of CPUFreq support, and its spinlock. This lock
38 * also protects the cpufreq_cpu_data array.
40 static struct cpufreq_driver *cpufreq_driver;
41 static struct cpufreq_policy *cpufreq_cpu_data[NR_CPUS];
42 #ifdef CONFIG_HOTPLUG_CPU
43 /* This one keeps track of the previously set governor of a removed CPU */
44 static struct cpufreq_governor *cpufreq_cpu_governor[NR_CPUS];
45 #endif
46 static DEFINE_SPINLOCK(cpufreq_driver_lock);
49 * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure
50 * all cpufreq/hotplug/workqueue/etc related lock issues.
52 * The rules for this semaphore:
53 * - Any routine that wants to read from the policy structure will
54 * do a down_read on this semaphore.
55 * - Any routine that will write to the policy structure and/or may take away
56 * the policy altogether (eg. CPU hotplug), will hold this lock in write
57 * mode before doing so.
59 * Additional rules:
60 * - All holders of the lock should check to make sure that the CPU they
61 * are concerned with are online after they get the lock.
62 * - Governor routines that can be called in cpufreq hotplug path should not
63 * take this sem as top level hotplug notifier handler takes this.
65 static DEFINE_PER_CPU(int, policy_cpu);
66 static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
68 #define lock_policy_rwsem(mode, cpu) \
69 int lock_policy_rwsem_##mode \
70 (int cpu) \
71 { \
72 int policy_cpu = per_cpu(policy_cpu, cpu); \
73 BUG_ON(policy_cpu == -1); \
74 down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
75 if (unlikely(!cpu_online(cpu))) { \
76 up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
77 return -1; \
78 } \
80 return 0; \
83 lock_policy_rwsem(read, cpu);
84 EXPORT_SYMBOL_GPL(lock_policy_rwsem_read);
86 lock_policy_rwsem(write, cpu);
87 EXPORT_SYMBOL_GPL(lock_policy_rwsem_write);
89 void unlock_policy_rwsem_read(int cpu)
91 int policy_cpu = per_cpu(policy_cpu, cpu);
92 BUG_ON(policy_cpu == -1);
93 up_read(&per_cpu(cpu_policy_rwsem, policy_cpu));
95 EXPORT_SYMBOL_GPL(unlock_policy_rwsem_read);
97 void unlock_policy_rwsem_write(int cpu)
99 int policy_cpu = per_cpu(policy_cpu, cpu);
100 BUG_ON(policy_cpu == -1);
101 up_write(&per_cpu(cpu_policy_rwsem, policy_cpu));
103 EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write);
106 /* internal prototypes */
107 static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
108 static unsigned int __cpufreq_get(unsigned int cpu);
109 static void handle_update(struct work_struct *work);
112 * Two notifier lists: the "policy" list is involved in the
113 * validation process for a new CPU frequency policy; the
114 * "transition" list for kernel code that needs to handle
115 * changes to devices when the CPU clock speed changes.
116 * The mutex locks both lists.
118 static BLOCKING_NOTIFIER_HEAD(cpufreq_policy_notifier_list);
119 static struct srcu_notifier_head cpufreq_transition_notifier_list;
121 static int __init init_cpufreq_transition_notifier_list(void)
123 srcu_init_notifier_head(&cpufreq_transition_notifier_list);
124 return 0;
126 pure_initcall(init_cpufreq_transition_notifier_list);
128 static LIST_HEAD(cpufreq_governor_list);
129 static DEFINE_MUTEX (cpufreq_governor_mutex);
131 struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
133 struct cpufreq_policy *data;
134 unsigned long flags;
136 if (cpu >= NR_CPUS)
137 goto err_out;
139 /* get the cpufreq driver */
140 spin_lock_irqsave(&cpufreq_driver_lock, flags);
142 if (!cpufreq_driver)
143 goto err_out_unlock;
145 if (!try_module_get(cpufreq_driver->owner))
146 goto err_out_unlock;
149 /* get the CPU */
150 data = cpufreq_cpu_data[cpu];
152 if (!data)
153 goto err_out_put_module;
155 if (!kobject_get(&data->kobj))
156 goto err_out_put_module;
158 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
159 return data;
161 err_out_put_module:
162 module_put(cpufreq_driver->owner);
163 err_out_unlock:
164 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
165 err_out:
166 return NULL;
168 EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
171 void cpufreq_cpu_put(struct cpufreq_policy *data)
173 kobject_put(&data->kobj);
174 module_put(cpufreq_driver->owner);
176 EXPORT_SYMBOL_GPL(cpufreq_cpu_put);
179 /*********************************************************************
180 * UNIFIED DEBUG HELPERS *
181 *********************************************************************/
182 #ifdef CONFIG_CPU_FREQ_DEBUG
184 /* what part(s) of the CPUfreq subsystem are debugged? */
185 static unsigned int debug;
187 /* is the debug output ratelimit'ed using printk_ratelimit? User can
188 * set or modify this value.
190 static unsigned int debug_ratelimit = 1;
192 /* is the printk_ratelimit'ing enabled? It's enabled after a successful
193 * loading of a cpufreq driver, temporarily disabled when a new policy
194 * is set, and disabled upon cpufreq driver removal
196 static unsigned int disable_ratelimit = 1;
197 static DEFINE_SPINLOCK(disable_ratelimit_lock);
199 static void cpufreq_debug_enable_ratelimit(void)
201 unsigned long flags;
203 spin_lock_irqsave(&disable_ratelimit_lock, flags);
204 if (disable_ratelimit)
205 disable_ratelimit--;
206 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
209 static void cpufreq_debug_disable_ratelimit(void)
211 unsigned long flags;
213 spin_lock_irqsave(&disable_ratelimit_lock, flags);
214 disable_ratelimit++;
215 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
218 void cpufreq_debug_printk(unsigned int type, const char *prefix,
219 const char *fmt, ...)
221 char s[256];
222 va_list args;
223 unsigned int len;
224 unsigned long flags;
226 WARN_ON(!prefix);
227 if (type & debug) {
228 spin_lock_irqsave(&disable_ratelimit_lock, flags);
229 if (!disable_ratelimit && debug_ratelimit
230 && !printk_ratelimit()) {
231 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
232 return;
234 spin_unlock_irqrestore(&disable_ratelimit_lock, flags);
236 len = snprintf(s, 256, KERN_DEBUG "%s: ", prefix);
238 va_start(args, fmt);
239 len += vsnprintf(&s[len], (256 - len), fmt, args);
240 va_end(args);
242 printk(s);
244 WARN_ON(len < 5);
247 EXPORT_SYMBOL(cpufreq_debug_printk);
250 module_param(debug, uint, 0644);
251 MODULE_PARM_DESC(debug, "CPUfreq debugging: add 1 to debug core,"
252 " 2 to debug drivers, and 4 to debug governors.");
254 module_param(debug_ratelimit, uint, 0644);
255 MODULE_PARM_DESC(debug_ratelimit, "CPUfreq debugging:"
256 " set to 0 to disable ratelimiting.");
258 #else /* !CONFIG_CPU_FREQ_DEBUG */
260 static inline void cpufreq_debug_enable_ratelimit(void) { return; }
261 static inline void cpufreq_debug_disable_ratelimit(void) { return; }
263 #endif /* CONFIG_CPU_FREQ_DEBUG */
266 /*********************************************************************
267 * EXTERNALLY AFFECTING FREQUENCY CHANGES *
268 *********************************************************************/
271 * adjust_jiffies - adjust the system "loops_per_jiffy"
273 * This function alters the system "loops_per_jiffy" for the clock
274 * speed change. Note that loops_per_jiffy cannot be updated on SMP
275 * systems as each CPU might be scaled differently. So, use the arch
276 * per-CPU loops_per_jiffy value wherever possible.
278 #ifndef CONFIG_SMP
279 static unsigned long l_p_j_ref;
280 static unsigned int l_p_j_ref_freq;
282 static void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
284 if (ci->flags & CPUFREQ_CONST_LOOPS)
285 return;
287 if (!l_p_j_ref_freq) {
288 l_p_j_ref = loops_per_jiffy;
289 l_p_j_ref_freq = ci->old;
290 dprintk("saving %lu as reference value for loops_per_jiffy; "
291 "freq is %u kHz\n", l_p_j_ref, l_p_j_ref_freq);
293 if ((val == CPUFREQ_PRECHANGE && ci->old < ci->new) ||
294 (val == CPUFREQ_POSTCHANGE && ci->old > ci->new) ||
295 (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) {
296 loops_per_jiffy = cpufreq_scale(l_p_j_ref, l_p_j_ref_freq,
297 ci->new);
298 dprintk("scaling loops_per_jiffy to %lu "
299 "for frequency %u kHz\n", loops_per_jiffy, ci->new);
302 #else
303 static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci)
305 return;
307 #endif
311 * cpufreq_notify_transition - call notifier chain and adjust_jiffies
312 * on frequency transition.
314 * This function calls the transition notifiers and the "adjust_jiffies"
315 * function. It is called twice on all CPU frequency changes that have
316 * external effects.
318 void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
320 struct cpufreq_policy *policy;
322 BUG_ON(irqs_disabled());
324 freqs->flags = cpufreq_driver->flags;
325 dprintk("notification %u of frequency transition to %u kHz\n",
326 state, freqs->new);
328 policy = cpufreq_cpu_data[freqs->cpu];
329 switch (state) {
331 case CPUFREQ_PRECHANGE:
332 /* detect if the driver reported a value as "old frequency"
333 * which is not equal to what the cpufreq core thinks is
334 * "old frequency".
336 if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
337 if ((policy) && (policy->cpu == freqs->cpu) &&
338 (policy->cur) && (policy->cur != freqs->old)) {
339 dprintk("Warning: CPU frequency is"
340 " %u, cpufreq assumed %u kHz.\n",
341 freqs->old, policy->cur);
342 freqs->old = policy->cur;
345 srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
346 CPUFREQ_PRECHANGE, freqs);
347 adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
348 break;
350 case CPUFREQ_POSTCHANGE:
351 adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
352 srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
353 CPUFREQ_POSTCHANGE, freqs);
354 if (likely(policy) && likely(policy->cpu == freqs->cpu))
355 policy->cur = freqs->new;
356 break;
359 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
363 /*********************************************************************
364 * SYSFS INTERFACE *
365 *********************************************************************/
367 static struct cpufreq_governor *__find_governor(const char *str_governor)
369 struct cpufreq_governor *t;
371 list_for_each_entry(t, &cpufreq_governor_list, governor_list)
372 if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN))
373 return t;
375 return NULL;
379 * cpufreq_parse_governor - parse a governor string
381 static int cpufreq_parse_governor (char *str_governor, unsigned int *policy,
382 struct cpufreq_governor **governor)
384 int err = -EINVAL;
386 if (!cpufreq_driver)
387 goto out;
389 if (cpufreq_driver->setpolicy) {
390 if (!strnicmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
391 *policy = CPUFREQ_POLICY_PERFORMANCE;
392 err = 0;
393 } else if (!strnicmp(str_governor, "powersave",
394 CPUFREQ_NAME_LEN)) {
395 *policy = CPUFREQ_POLICY_POWERSAVE;
396 err = 0;
398 } else if (cpufreq_driver->target) {
399 struct cpufreq_governor *t;
401 mutex_lock(&cpufreq_governor_mutex);
403 t = __find_governor(str_governor);
405 if (t == NULL) {
406 char *name = kasprintf(GFP_KERNEL, "cpufreq_%s",
407 str_governor);
409 if (name) {
410 int ret;
412 mutex_unlock(&cpufreq_governor_mutex);
413 ret = request_module(name);
414 mutex_lock(&cpufreq_governor_mutex);
416 if (ret == 0)
417 t = __find_governor(str_governor);
420 kfree(name);
423 if (t != NULL) {
424 *governor = t;
425 err = 0;
428 mutex_unlock(&cpufreq_governor_mutex);
430 out:
431 return err;
435 /* drivers/base/cpu.c */
436 extern struct sysdev_class cpu_sysdev_class;
440 * cpufreq_per_cpu_attr_read() / show_##file_name() -
441 * print out cpufreq information
443 * Write out information from cpufreq_driver->policy[cpu]; object must be
444 * "unsigned int".
447 #define show_one(file_name, object) \
448 static ssize_t show_##file_name \
449 (struct cpufreq_policy * policy, char *buf) \
451 return sprintf (buf, "%u\n", policy->object); \
454 show_one(cpuinfo_min_freq, cpuinfo.min_freq);
455 show_one(cpuinfo_max_freq, cpuinfo.max_freq);
456 show_one(scaling_min_freq, min);
457 show_one(scaling_max_freq, max);
458 show_one(scaling_cur_freq, cur);
460 static int __cpufreq_set_policy(struct cpufreq_policy *data,
461 struct cpufreq_policy *policy);
464 * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
466 #define store_one(file_name, object) \
467 static ssize_t store_##file_name \
468 (struct cpufreq_policy * policy, const char *buf, size_t count) \
470 unsigned int ret = -EINVAL; \
471 struct cpufreq_policy new_policy; \
473 ret = cpufreq_get_policy(&new_policy, policy->cpu); \
474 if (ret) \
475 return -EINVAL; \
477 ret = sscanf (buf, "%u", &new_policy.object); \
478 if (ret != 1) \
479 return -EINVAL; \
481 ret = __cpufreq_set_policy(policy, &new_policy); \
482 policy->user_policy.object = policy->object; \
484 return ret ? ret : count; \
487 store_one(scaling_min_freq,min);
488 store_one(scaling_max_freq,max);
491 * show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
493 static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy,
494 char *buf)
496 unsigned int cur_freq = __cpufreq_get(policy->cpu);
497 if (!cur_freq)
498 return sprintf(buf, "<unknown>");
499 return sprintf(buf, "%u\n", cur_freq);
504 * show_scaling_governor - show the current policy for the specified CPU
506 static ssize_t show_scaling_governor (struct cpufreq_policy * policy,
507 char *buf)
509 if(policy->policy == CPUFREQ_POLICY_POWERSAVE)
510 return sprintf(buf, "powersave\n");
511 else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
512 return sprintf(buf, "performance\n");
513 else if (policy->governor)
514 return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", policy->governor->name);
515 return -EINVAL;
520 * store_scaling_governor - store policy for the specified CPU
522 static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
523 const char *buf, size_t count)
525 unsigned int ret = -EINVAL;
526 char str_governor[16];
527 struct cpufreq_policy new_policy;
529 ret = cpufreq_get_policy(&new_policy, policy->cpu);
530 if (ret)
531 return ret;
533 ret = sscanf (buf, "%15s", str_governor);
534 if (ret != 1)
535 return -EINVAL;
537 if (cpufreq_parse_governor(str_governor, &new_policy.policy,
538 &new_policy.governor))
539 return -EINVAL;
541 /* Do not use cpufreq_set_policy here or the user_policy.max
542 will be wrongly overridden */
543 ret = __cpufreq_set_policy(policy, &new_policy);
545 policy->user_policy.policy = policy->policy;
546 policy->user_policy.governor = policy->governor;
548 if (ret)
549 return ret;
550 else
551 return count;
555 * show_scaling_driver - show the cpufreq driver currently loaded
557 static ssize_t show_scaling_driver (struct cpufreq_policy * policy, char *buf)
559 return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
563 * show_scaling_available_governors - show the available CPUfreq governors
565 static ssize_t show_scaling_available_governors (struct cpufreq_policy *policy,
566 char *buf)
568 ssize_t i = 0;
569 struct cpufreq_governor *t;
571 if (!cpufreq_driver->target) {
572 i += sprintf(buf, "performance powersave");
573 goto out;
576 list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
577 if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) - (CPUFREQ_NAME_LEN + 2)))
578 goto out;
579 i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
581 out:
582 i += sprintf(&buf[i], "\n");
583 return i;
586 * show_affected_cpus - show the CPUs affected by each transition
588 static ssize_t show_affected_cpus (struct cpufreq_policy * policy, char *buf)
590 ssize_t i = 0;
591 unsigned int cpu;
593 for_each_cpu_mask(cpu, policy->cpus) {
594 if (i)
595 i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " ");
596 i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu);
597 if (i >= (PAGE_SIZE - 5))
598 break;
600 i += sprintf(&buf[i], "\n");
601 return i;
604 static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy,
605 const char *buf, size_t count)
607 unsigned int freq = 0;
608 unsigned int ret;
610 if (!policy->governor->store_setspeed)
611 return -EINVAL;
613 ret = sscanf(buf, "%u", &freq);
614 if (ret != 1)
615 return -EINVAL;
617 policy->governor->store_setspeed(policy, freq);
619 return count;
622 static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
624 if (!policy->governor->show_setspeed)
625 return sprintf(buf, "<unsupported>\n");
627 return policy->governor->show_setspeed(policy, buf);
630 #define define_one_ro(_name) \
631 static struct freq_attr _name = \
632 __ATTR(_name, 0444, show_##_name, NULL)
634 #define define_one_ro0400(_name) \
635 static struct freq_attr _name = \
636 __ATTR(_name, 0400, show_##_name, NULL)
638 #define define_one_rw(_name) \
639 static struct freq_attr _name = \
640 __ATTR(_name, 0644, show_##_name, store_##_name)
642 define_one_ro0400(cpuinfo_cur_freq);
643 define_one_ro(cpuinfo_min_freq);
644 define_one_ro(cpuinfo_max_freq);
645 define_one_ro(scaling_available_governors);
646 define_one_ro(scaling_driver);
647 define_one_ro(scaling_cur_freq);
648 define_one_ro(affected_cpus);
649 define_one_rw(scaling_min_freq);
650 define_one_rw(scaling_max_freq);
651 define_one_rw(scaling_governor);
652 define_one_rw(scaling_setspeed);
654 static struct attribute * default_attrs[] = {
655 &cpuinfo_min_freq.attr,
656 &cpuinfo_max_freq.attr,
657 &scaling_min_freq.attr,
658 &scaling_max_freq.attr,
659 &affected_cpus.attr,
660 &scaling_governor.attr,
661 &scaling_driver.attr,
662 &scaling_available_governors.attr,
663 &scaling_setspeed.attr,
664 NULL
667 #define to_policy(k) container_of(k,struct cpufreq_policy,kobj)
668 #define to_attr(a) container_of(a,struct freq_attr,attr)
670 static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf)
672 struct cpufreq_policy * policy = to_policy(kobj);
673 struct freq_attr * fattr = to_attr(attr);
674 ssize_t ret;
675 policy = cpufreq_cpu_get(policy->cpu);
676 if (!policy)
677 return -EINVAL;
679 if (lock_policy_rwsem_read(policy->cpu) < 0)
680 return -EINVAL;
682 if (fattr->show)
683 ret = fattr->show(policy, buf);
684 else
685 ret = -EIO;
687 unlock_policy_rwsem_read(policy->cpu);
689 cpufreq_cpu_put(policy);
690 return ret;
693 static ssize_t store(struct kobject * kobj, struct attribute * attr,
694 const char * buf, size_t count)
696 struct cpufreq_policy * policy = to_policy(kobj);
697 struct freq_attr * fattr = to_attr(attr);
698 ssize_t ret;
699 policy = cpufreq_cpu_get(policy->cpu);
700 if (!policy)
701 return -EINVAL;
703 if (lock_policy_rwsem_write(policy->cpu) < 0)
704 return -EINVAL;
706 if (fattr->store)
707 ret = fattr->store(policy, buf, count);
708 else
709 ret = -EIO;
711 unlock_policy_rwsem_write(policy->cpu);
713 cpufreq_cpu_put(policy);
714 return ret;
717 static void cpufreq_sysfs_release(struct kobject * kobj)
719 struct cpufreq_policy * policy = to_policy(kobj);
720 dprintk("last reference is dropped\n");
721 complete(&policy->kobj_unregister);
724 static struct sysfs_ops sysfs_ops = {
725 .show = show,
726 .store = store,
729 static struct kobj_type ktype_cpufreq = {
730 .sysfs_ops = &sysfs_ops,
731 .default_attrs = default_attrs,
732 .release = cpufreq_sysfs_release,
737 * cpufreq_add_dev - add a CPU device
739 * Adds the cpufreq interface for a CPU device.
741 static int cpufreq_add_dev (struct sys_device * sys_dev)
743 unsigned int cpu = sys_dev->id;
744 int ret = 0;
745 struct cpufreq_policy new_policy;
746 struct cpufreq_policy *policy;
747 struct freq_attr **drv_attr;
748 struct sys_device *cpu_sys_dev;
749 unsigned long flags;
750 unsigned int j;
751 #ifdef CONFIG_SMP
752 struct cpufreq_policy *managed_policy;
753 #endif
755 if (cpu_is_offline(cpu))
756 return 0;
758 cpufreq_debug_disable_ratelimit();
759 dprintk("adding CPU %u\n", cpu);
761 #ifdef CONFIG_SMP
762 /* check whether a different CPU already registered this
763 * CPU because it is in the same boat. */
764 policy = cpufreq_cpu_get(cpu);
765 if (unlikely(policy)) {
766 cpufreq_cpu_put(policy);
767 cpufreq_debug_enable_ratelimit();
768 return 0;
770 #endif
772 if (!try_module_get(cpufreq_driver->owner)) {
773 ret = -EINVAL;
774 goto module_out;
777 policy = kzalloc(sizeof(struct cpufreq_policy), GFP_KERNEL);
778 if (!policy) {
779 ret = -ENOMEM;
780 goto nomem_out;
783 policy->cpu = cpu;
784 policy->cpus = cpumask_of_cpu(cpu);
786 /* Initially set CPU itself as the policy_cpu */
787 per_cpu(policy_cpu, cpu) = cpu;
788 lock_policy_rwsem_write(cpu);
790 init_completion(&policy->kobj_unregister);
791 INIT_WORK(&policy->update, handle_update);
793 /* Set governor before ->init, so that driver could check it */
794 policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
795 /* call driver. From then on the cpufreq must be able
796 * to accept all calls to ->verify and ->setpolicy for this CPU
798 ret = cpufreq_driver->init(policy);
799 if (ret) {
800 dprintk("initialization failed\n");
801 unlock_policy_rwsem_write(cpu);
802 goto err_out;
804 policy->user_policy.min = policy->cpuinfo.min_freq;
805 policy->user_policy.max = policy->cpuinfo.max_freq;
807 #ifdef CONFIG_SMP
809 #ifdef CONFIG_HOTPLUG_CPU
810 if (cpufreq_cpu_governor[cpu]){
811 policy->governor = cpufreq_cpu_governor[cpu];
812 dprintk("Restoring governor %s for cpu %d\n",
813 policy->governor->name, cpu);
815 #endif
817 for_each_cpu_mask(j, policy->cpus) {
818 if (cpu == j)
819 continue;
821 /* check for existing affected CPUs. They may not be aware
822 * of it due to CPU Hotplug.
824 managed_policy = cpufreq_cpu_get(j);
825 if (unlikely(managed_policy)) {
827 /* Set proper policy_cpu */
828 unlock_policy_rwsem_write(cpu);
829 per_cpu(policy_cpu, cpu) = managed_policy->cpu;
831 if (lock_policy_rwsem_write(cpu) < 0)
832 goto err_out_driver_exit;
834 spin_lock_irqsave(&cpufreq_driver_lock, flags);
835 managed_policy->cpus = policy->cpus;
836 cpufreq_cpu_data[cpu] = managed_policy;
837 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
839 dprintk("CPU already managed, adding link\n");
840 ret = sysfs_create_link(&sys_dev->kobj,
841 &managed_policy->kobj,
842 "cpufreq");
843 if (ret) {
844 unlock_policy_rwsem_write(cpu);
845 goto err_out_driver_exit;
848 cpufreq_debug_enable_ratelimit();
849 ret = 0;
850 unlock_policy_rwsem_write(cpu);
851 goto err_out_driver_exit; /* call driver->exit() */
854 #endif
855 memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
857 /* prepare interface data */
858 ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
859 "cpufreq");
860 if (ret) {
861 unlock_policy_rwsem_write(cpu);
862 goto err_out_driver_exit;
864 /* set up files for this cpu device */
865 drv_attr = cpufreq_driver->attr;
866 while ((drv_attr) && (*drv_attr)) {
867 ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
868 if (ret) {
869 unlock_policy_rwsem_write(cpu);
870 goto err_out_driver_exit;
872 drv_attr++;
874 if (cpufreq_driver->get){
875 ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
876 if (ret) {
877 unlock_policy_rwsem_write(cpu);
878 goto err_out_driver_exit;
881 if (cpufreq_driver->target){
882 ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
883 if (ret) {
884 unlock_policy_rwsem_write(cpu);
885 goto err_out_driver_exit;
889 spin_lock_irqsave(&cpufreq_driver_lock, flags);
890 for_each_cpu_mask(j, policy->cpus) {
891 cpufreq_cpu_data[j] = policy;
892 per_cpu(policy_cpu, j) = policy->cpu;
894 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
896 /* symlink affected CPUs */
897 for_each_cpu_mask(j, policy->cpus) {
898 if (j == cpu)
899 continue;
900 if (!cpu_online(j))
901 continue;
903 dprintk("CPU %u already managed, adding link\n", j);
904 cpufreq_cpu_get(cpu);
905 cpu_sys_dev = get_cpu_sysdev(j);
906 ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
907 "cpufreq");
908 if (ret) {
909 unlock_policy_rwsem_write(cpu);
910 goto err_out_unregister;
914 policy->governor = NULL; /* to assure that the starting sequence is
915 * run in cpufreq_set_policy */
917 /* set default policy */
918 ret = __cpufreq_set_policy(policy, &new_policy);
919 policy->user_policy.policy = policy->policy;
920 policy->user_policy.governor = policy->governor;
922 unlock_policy_rwsem_write(cpu);
924 if (ret) {
925 dprintk("setting policy failed\n");
926 goto err_out_unregister;
929 kobject_uevent(&policy->kobj, KOBJ_ADD);
930 module_put(cpufreq_driver->owner);
931 dprintk("initialization complete\n");
932 cpufreq_debug_enable_ratelimit();
934 return 0;
937 err_out_unregister:
938 spin_lock_irqsave(&cpufreq_driver_lock, flags);
939 for_each_cpu_mask(j, policy->cpus)
940 cpufreq_cpu_data[j] = NULL;
941 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
943 kobject_put(&policy->kobj);
944 wait_for_completion(&policy->kobj_unregister);
946 err_out_driver_exit:
947 if (cpufreq_driver->exit)
948 cpufreq_driver->exit(policy);
950 err_out:
951 kfree(policy);
953 nomem_out:
954 module_put(cpufreq_driver->owner);
955 module_out:
956 cpufreq_debug_enable_ratelimit();
957 return ret;
962 * __cpufreq_remove_dev - remove a CPU device
964 * Removes the cpufreq interface for a CPU device.
965 * Caller should already have policy_rwsem in write mode for this CPU.
966 * This routine frees the rwsem before returning.
968 static int __cpufreq_remove_dev (struct sys_device * sys_dev)
970 unsigned int cpu = sys_dev->id;
971 unsigned long flags;
972 struct cpufreq_policy *data;
973 #ifdef CONFIG_SMP
974 struct sys_device *cpu_sys_dev;
975 unsigned int j;
976 #endif
978 cpufreq_debug_disable_ratelimit();
979 dprintk("unregistering CPU %u\n", cpu);
981 spin_lock_irqsave(&cpufreq_driver_lock, flags);
982 data = cpufreq_cpu_data[cpu];
984 if (!data) {
985 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
986 cpufreq_debug_enable_ratelimit();
987 unlock_policy_rwsem_write(cpu);
988 return -EINVAL;
990 cpufreq_cpu_data[cpu] = NULL;
993 #ifdef CONFIG_SMP
994 /* if this isn't the CPU which is the parent of the kobj, we
995 * only need to unlink, put and exit
997 if (unlikely(cpu != data->cpu)) {
998 dprintk("removing link\n");
999 cpu_clear(cpu, data->cpus);
1000 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1001 sysfs_remove_link(&sys_dev->kobj, "cpufreq");
1002 cpufreq_cpu_put(data);
1003 cpufreq_debug_enable_ratelimit();
1004 unlock_policy_rwsem_write(cpu);
1005 return 0;
1007 #endif
1009 #ifdef CONFIG_SMP
1011 #ifdef CONFIG_HOTPLUG_CPU
1012 cpufreq_cpu_governor[cpu] = data->governor;
1013 #endif
1015 /* if we have other CPUs still registered, we need to unlink them,
1016 * or else wait_for_completion below will lock up. Clean the
1017 * cpufreq_cpu_data[] while holding the lock, and remove the sysfs
1018 * links afterwards.
1020 if (unlikely(cpus_weight(data->cpus) > 1)) {
1021 for_each_cpu_mask(j, data->cpus) {
1022 if (j == cpu)
1023 continue;
1024 cpufreq_cpu_data[j] = NULL;
1028 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1030 if (unlikely(cpus_weight(data->cpus) > 1)) {
1031 for_each_cpu_mask(j, data->cpus) {
1032 if (j == cpu)
1033 continue;
1034 dprintk("removing link for cpu %u\n", j);
1035 #ifdef CONFIG_HOTPLUG_CPU
1036 cpufreq_cpu_governor[j] = data->governor;
1037 #endif
1038 cpu_sys_dev = get_cpu_sysdev(j);
1039 sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
1040 cpufreq_cpu_put(data);
1043 #else
1044 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1045 #endif
1047 if (cpufreq_driver->target)
1048 __cpufreq_governor(data, CPUFREQ_GOV_STOP);
1050 unlock_policy_rwsem_write(cpu);
1052 kobject_put(&data->kobj);
1054 /* we need to make sure that the underlying kobj is actually
1055 * not referenced anymore by anybody before we proceed with
1056 * unloading.
1058 dprintk("waiting for dropping of refcount\n");
1059 wait_for_completion(&data->kobj_unregister);
1060 dprintk("wait complete\n");
1062 if (cpufreq_driver->exit)
1063 cpufreq_driver->exit(data);
1065 kfree(data);
1067 cpufreq_debug_enable_ratelimit();
1068 return 0;
1072 static int cpufreq_remove_dev (struct sys_device * sys_dev)
1074 unsigned int cpu = sys_dev->id;
1075 int retval;
1077 if (cpu_is_offline(cpu))
1078 return 0;
1080 if (unlikely(lock_policy_rwsem_write(cpu)))
1081 BUG();
1083 retval = __cpufreq_remove_dev(sys_dev);
1084 return retval;
1088 static void handle_update(struct work_struct *work)
1090 struct cpufreq_policy *policy =
1091 container_of(work, struct cpufreq_policy, update);
1092 unsigned int cpu = policy->cpu;
1093 dprintk("handle_update for cpu %u called\n", cpu);
1094 cpufreq_update_policy(cpu);
1098 * cpufreq_out_of_sync - If actual and saved CPU frequency differs, we're in deep trouble.
1099 * @cpu: cpu number
1100 * @old_freq: CPU frequency the kernel thinks the CPU runs at
1101 * @new_freq: CPU frequency the CPU actually runs at
1103 * We adjust to current frequency first, and need to clean up later. So either call
1104 * to cpufreq_update_policy() or schedule handle_update()).
1106 static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
1107 unsigned int new_freq)
1109 struct cpufreq_freqs freqs;
1111 dprintk("Warning: CPU frequency out of sync: cpufreq and timing "
1112 "core thinks of %u, is %u kHz.\n", old_freq, new_freq);
1114 freqs.cpu = cpu;
1115 freqs.old = old_freq;
1116 freqs.new = new_freq;
1117 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
1118 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
1123 * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
1124 * @cpu: CPU number
1126 * This is the last known freq, without actually getting it from the driver.
1127 * Return value will be same as what is shown in scaling_cur_freq in sysfs.
1129 unsigned int cpufreq_quick_get(unsigned int cpu)
1131 struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
1132 unsigned int ret_freq = 0;
1134 if (policy) {
1135 ret_freq = policy->cur;
1136 cpufreq_cpu_put(policy);
1139 return (ret_freq);
1141 EXPORT_SYMBOL(cpufreq_quick_get);
1144 static unsigned int __cpufreq_get(unsigned int cpu)
1146 struct cpufreq_policy *policy = cpufreq_cpu_data[cpu];
1147 unsigned int ret_freq = 0;
1149 if (!cpufreq_driver->get)
1150 return (ret_freq);
1152 ret_freq = cpufreq_driver->get(cpu);
1154 if (ret_freq && policy->cur &&
1155 !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
1156 /* verify no discrepancy between actual and
1157 saved value exists */
1158 if (unlikely(ret_freq != policy->cur)) {
1159 cpufreq_out_of_sync(cpu, policy->cur, ret_freq);
1160 schedule_work(&policy->update);
1164 return (ret_freq);
1168 * cpufreq_get - get the current CPU frequency (in kHz)
1169 * @cpu: CPU number
1171 * Get the CPU current (static) CPU frequency
1173 unsigned int cpufreq_get(unsigned int cpu)
1175 unsigned int ret_freq = 0;
1176 struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
1178 if (!policy)
1179 goto out;
1181 if (unlikely(lock_policy_rwsem_read(cpu)))
1182 goto out_policy;
1184 ret_freq = __cpufreq_get(cpu);
1186 unlock_policy_rwsem_read(cpu);
1188 out_policy:
1189 cpufreq_cpu_put(policy);
1190 out:
1191 return (ret_freq);
1193 EXPORT_SYMBOL(cpufreq_get);
1197 * cpufreq_suspend - let the low level driver prepare for suspend
1200 static int cpufreq_suspend(struct sys_device * sysdev, pm_message_t pmsg)
1202 int cpu = sysdev->id;
1203 int ret = 0;
1204 unsigned int cur_freq = 0;
1205 struct cpufreq_policy *cpu_policy;
1207 dprintk("suspending cpu %u\n", cpu);
1209 if (!cpu_online(cpu))
1210 return 0;
1212 /* we may be lax here as interrupts are off. Nonetheless
1213 * we need to grab the correct cpu policy, as to check
1214 * whether we really run on this CPU.
1217 cpu_policy = cpufreq_cpu_get(cpu);
1218 if (!cpu_policy)
1219 return -EINVAL;
1221 /* only handle each CPU group once */
1222 if (unlikely(cpu_policy->cpu != cpu)) {
1223 cpufreq_cpu_put(cpu_policy);
1224 return 0;
1227 if (cpufreq_driver->suspend) {
1228 ret = cpufreq_driver->suspend(cpu_policy, pmsg);
1229 if (ret) {
1230 printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
1231 "step on CPU %u\n", cpu_policy->cpu);
1232 cpufreq_cpu_put(cpu_policy);
1233 return ret;
1238 if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
1239 goto out;
1241 if (cpufreq_driver->get)
1242 cur_freq = cpufreq_driver->get(cpu_policy->cpu);
1244 if (!cur_freq || !cpu_policy->cur) {
1245 printk(KERN_ERR "cpufreq: suspend failed to assert current "
1246 "frequency is what timing core thinks it is.\n");
1247 goto out;
1250 if (unlikely(cur_freq != cpu_policy->cur)) {
1251 struct cpufreq_freqs freqs;
1253 if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
1254 dprintk("Warning: CPU frequency is %u, "
1255 "cpufreq assumed %u kHz.\n",
1256 cur_freq, cpu_policy->cur);
1258 freqs.cpu = cpu;
1259 freqs.old = cpu_policy->cur;
1260 freqs.new = cur_freq;
1262 srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
1263 CPUFREQ_SUSPENDCHANGE, &freqs);
1264 adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
1266 cpu_policy->cur = cur_freq;
1269 out:
1270 cpufreq_cpu_put(cpu_policy);
1271 return 0;
1275 * cpufreq_resume - restore proper CPU frequency handling after resume
1277 * 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
1278 * 2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
1279 * 3.) schedule call cpufreq_update_policy() ASAP as interrupts are
1280 * restored.
1282 static int cpufreq_resume(struct sys_device * sysdev)
1284 int cpu = sysdev->id;
1285 int ret = 0;
1286 struct cpufreq_policy *cpu_policy;
1288 dprintk("resuming cpu %u\n", cpu);
1290 if (!cpu_online(cpu))
1291 return 0;
1293 /* we may be lax here as interrupts are off. Nonetheless
1294 * we need to grab the correct cpu policy, as to check
1295 * whether we really run on this CPU.
1298 cpu_policy = cpufreq_cpu_get(cpu);
1299 if (!cpu_policy)
1300 return -EINVAL;
1302 /* only handle each CPU group once */
1303 if (unlikely(cpu_policy->cpu != cpu)) {
1304 cpufreq_cpu_put(cpu_policy);
1305 return 0;
1308 if (cpufreq_driver->resume) {
1309 ret = cpufreq_driver->resume(cpu_policy);
1310 if (ret) {
1311 printk(KERN_ERR "cpufreq: resume failed in ->resume "
1312 "step on CPU %u\n", cpu_policy->cpu);
1313 cpufreq_cpu_put(cpu_policy);
1314 return ret;
1318 if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
1319 unsigned int cur_freq = 0;
1321 if (cpufreq_driver->get)
1322 cur_freq = cpufreq_driver->get(cpu_policy->cpu);
1324 if (!cur_freq || !cpu_policy->cur) {
1325 printk(KERN_ERR "cpufreq: resume failed to assert "
1326 "current frequency is what timing core "
1327 "thinks it is.\n");
1328 goto out;
1331 if (unlikely(cur_freq != cpu_policy->cur)) {
1332 struct cpufreq_freqs freqs;
1334 if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
1335 dprintk("Warning: CPU frequency "
1336 "is %u, cpufreq assumed %u kHz.\n",
1337 cur_freq, cpu_policy->cur);
1339 freqs.cpu = cpu;
1340 freqs.old = cpu_policy->cur;
1341 freqs.new = cur_freq;
1343 srcu_notifier_call_chain(
1344 &cpufreq_transition_notifier_list,
1345 CPUFREQ_RESUMECHANGE, &freqs);
1346 adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
1348 cpu_policy->cur = cur_freq;
1352 out:
1353 schedule_work(&cpu_policy->update);
1354 cpufreq_cpu_put(cpu_policy);
1355 return ret;
1358 static struct sysdev_driver cpufreq_sysdev_driver = {
1359 .add = cpufreq_add_dev,
1360 .remove = cpufreq_remove_dev,
1361 .suspend = cpufreq_suspend,
1362 .resume = cpufreq_resume,
1366 /*********************************************************************
1367 * NOTIFIER LISTS INTERFACE *
1368 *********************************************************************/
1371 * cpufreq_register_notifier - register a driver with cpufreq
1372 * @nb: notifier function to register
1373 * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
1375 * Add a driver to one of two lists: either a list of drivers that
1376 * are notified about clock rate changes (once before and once after
1377 * the transition), or a list of drivers that are notified about
1378 * changes in cpufreq policy.
1380 * This function may sleep, and has the same return conditions as
1381 * blocking_notifier_chain_register.
1383 int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
1385 int ret;
1387 switch (list) {
1388 case CPUFREQ_TRANSITION_NOTIFIER:
1389 ret = srcu_notifier_chain_register(
1390 &cpufreq_transition_notifier_list, nb);
1391 break;
1392 case CPUFREQ_POLICY_NOTIFIER:
1393 ret = blocking_notifier_chain_register(
1394 &cpufreq_policy_notifier_list, nb);
1395 break;
1396 default:
1397 ret = -EINVAL;
1400 return ret;
1402 EXPORT_SYMBOL(cpufreq_register_notifier);
1406 * cpufreq_unregister_notifier - unregister a driver with cpufreq
1407 * @nb: notifier block to be unregistered
1408 * @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
1410 * Remove a driver from the CPU frequency notifier list.
1412 * This function may sleep, and has the same return conditions as
1413 * blocking_notifier_chain_unregister.
1415 int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list)
1417 int ret;
1419 switch (list) {
1420 case CPUFREQ_TRANSITION_NOTIFIER:
1421 ret = srcu_notifier_chain_unregister(
1422 &cpufreq_transition_notifier_list, nb);
1423 break;
1424 case CPUFREQ_POLICY_NOTIFIER:
1425 ret = blocking_notifier_chain_unregister(
1426 &cpufreq_policy_notifier_list, nb);
1427 break;
1428 default:
1429 ret = -EINVAL;
1432 return ret;
1434 EXPORT_SYMBOL(cpufreq_unregister_notifier);
1437 /*********************************************************************
1438 * GOVERNORS *
1439 *********************************************************************/
1442 int __cpufreq_driver_target(struct cpufreq_policy *policy,
1443 unsigned int target_freq,
1444 unsigned int relation)
1446 int retval = -EINVAL;
1448 dprintk("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
1449 target_freq, relation);
1450 if (cpu_online(policy->cpu) && cpufreq_driver->target)
1451 retval = cpufreq_driver->target(policy, target_freq, relation);
1453 return retval;
1455 EXPORT_SYMBOL_GPL(__cpufreq_driver_target);
1457 int cpufreq_driver_target(struct cpufreq_policy *policy,
1458 unsigned int target_freq,
1459 unsigned int relation)
1461 int ret;
1463 policy = cpufreq_cpu_get(policy->cpu);
1464 if (!policy)
1465 return -EINVAL;
1467 if (unlikely(lock_policy_rwsem_write(policy->cpu)))
1468 return -EINVAL;
1470 ret = __cpufreq_driver_target(policy, target_freq, relation);
1472 unlock_policy_rwsem_write(policy->cpu);
1474 cpufreq_cpu_put(policy);
1475 return ret;
1477 EXPORT_SYMBOL_GPL(cpufreq_driver_target);
1479 int __cpufreq_driver_getavg(struct cpufreq_policy *policy)
1481 int ret = 0;
1483 policy = cpufreq_cpu_get(policy->cpu);
1484 if (!policy)
1485 return -EINVAL;
1487 if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
1488 ret = cpufreq_driver->getavg(policy->cpu);
1490 cpufreq_cpu_put(policy);
1491 return ret;
1493 EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg);
1496 * when "event" is CPUFREQ_GOV_LIMITS
1499 static int __cpufreq_governor(struct cpufreq_policy *policy,
1500 unsigned int event)
1502 int ret;
1504 /* Only must be defined when default governor is known to have latency
1505 restrictions, like e.g. conservative or ondemand.
1506 That this is the case is already ensured in Kconfig
1508 #ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
1509 struct cpufreq_governor *gov = &cpufreq_gov_performance;
1510 #else
1511 struct cpufreq_governor *gov = NULL;
1512 #endif
1514 if (policy->governor->max_transition_latency &&
1515 policy->cpuinfo.transition_latency >
1516 policy->governor->max_transition_latency) {
1517 if (!gov)
1518 return -EINVAL;
1519 else {
1520 printk(KERN_WARNING "%s governor failed, too long"
1521 " transition latency of HW, fallback"
1522 " to %s governor\n",
1523 policy->governor->name,
1524 gov->name);
1525 policy->governor = gov;
1529 if (!try_module_get(policy->governor->owner))
1530 return -EINVAL;
1532 dprintk("__cpufreq_governor for CPU %u, event %u\n",
1533 policy->cpu, event);
1534 ret = policy->governor->governor(policy, event);
1536 /* we keep one module reference alive for
1537 each CPU governed by this CPU */
1538 if ((event != CPUFREQ_GOV_START) || ret)
1539 module_put(policy->governor->owner);
1540 if ((event == CPUFREQ_GOV_STOP) && !ret)
1541 module_put(policy->governor->owner);
1543 return ret;
1547 int cpufreq_register_governor(struct cpufreq_governor *governor)
1549 int err;
1551 if (!governor)
1552 return -EINVAL;
1554 mutex_lock(&cpufreq_governor_mutex);
1556 err = -EBUSY;
1557 if (__find_governor(governor->name) == NULL) {
1558 err = 0;
1559 list_add(&governor->governor_list, &cpufreq_governor_list);
1562 mutex_unlock(&cpufreq_governor_mutex);
1563 return err;
1565 EXPORT_SYMBOL_GPL(cpufreq_register_governor);
1568 void cpufreq_unregister_governor(struct cpufreq_governor *governor)
1570 if (!governor)
1571 return;
1573 mutex_lock(&cpufreq_governor_mutex);
1574 list_del(&governor->governor_list);
1575 mutex_unlock(&cpufreq_governor_mutex);
1576 return;
1578 EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
1582 /*********************************************************************
1583 * POLICY INTERFACE *
1584 *********************************************************************/
1587 * cpufreq_get_policy - get the current cpufreq_policy
1588 * @policy: struct cpufreq_policy into which the current cpufreq_policy is written
1590 * Reads the current cpufreq policy.
1592 int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu)
1594 struct cpufreq_policy *cpu_policy;
1595 if (!policy)
1596 return -EINVAL;
1598 cpu_policy = cpufreq_cpu_get(cpu);
1599 if (!cpu_policy)
1600 return -EINVAL;
1602 memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy));
1604 cpufreq_cpu_put(cpu_policy);
1605 return 0;
1607 EXPORT_SYMBOL(cpufreq_get_policy);
1611 * data : current policy.
1612 * policy : policy to be set.
1614 static int __cpufreq_set_policy(struct cpufreq_policy *data,
1615 struct cpufreq_policy *policy)
1617 int ret = 0;
1619 cpufreq_debug_disable_ratelimit();
1620 dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
1621 policy->min, policy->max);
1623 memcpy(&policy->cpuinfo, &data->cpuinfo,
1624 sizeof(struct cpufreq_cpuinfo));
1626 if (policy->min > data->max || policy->max < data->min) {
1627 ret = -EINVAL;
1628 goto error_out;
1631 /* verify the cpu speed can be set within this limit */
1632 ret = cpufreq_driver->verify(policy);
1633 if (ret)
1634 goto error_out;
1636 /* adjust if necessary - all reasons */
1637 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1638 CPUFREQ_ADJUST, policy);
1640 /* adjust if necessary - hardware incompatibility*/
1641 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1642 CPUFREQ_INCOMPATIBLE, policy);
1644 /* verify the cpu speed can be set within this limit,
1645 which might be different to the first one */
1646 ret = cpufreq_driver->verify(policy);
1647 if (ret)
1648 goto error_out;
1650 /* notification of the new policy */
1651 blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
1652 CPUFREQ_NOTIFY, policy);
1654 data->min = policy->min;
1655 data->max = policy->max;
1657 dprintk("new min and max freqs are %u - %u kHz\n",
1658 data->min, data->max);
1660 if (cpufreq_driver->setpolicy) {
1661 data->policy = policy->policy;
1662 dprintk("setting range\n");
1663 ret = cpufreq_driver->setpolicy(policy);
1664 } else {
1665 if (policy->governor != data->governor) {
1666 /* save old, working values */
1667 struct cpufreq_governor *old_gov = data->governor;
1669 dprintk("governor switch\n");
1671 /* end old governor */
1672 if (data->governor)
1673 __cpufreq_governor(data, CPUFREQ_GOV_STOP);
1675 /* start new governor */
1676 data->governor = policy->governor;
1677 if (__cpufreq_governor(data, CPUFREQ_GOV_START)) {
1678 /* new governor failed, so re-start old one */
1679 dprintk("starting governor %s failed\n",
1680 data->governor->name);
1681 if (old_gov) {
1682 data->governor = old_gov;
1683 __cpufreq_governor(data,
1684 CPUFREQ_GOV_START);
1686 ret = -EINVAL;
1687 goto error_out;
1689 /* might be a policy change, too, so fall through */
1691 dprintk("governor: change or update limits\n");
1692 __cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
1695 error_out:
1696 cpufreq_debug_enable_ratelimit();
1697 return ret;
1701 * cpufreq_update_policy - re-evaluate an existing cpufreq policy
1702 * @cpu: CPU which shall be re-evaluated
1704 * Usefull for policy notifiers which have different necessities
1705 * at different times.
1707 int cpufreq_update_policy(unsigned int cpu)
1709 struct cpufreq_policy *data = cpufreq_cpu_get(cpu);
1710 struct cpufreq_policy policy;
1711 int ret = 0;
1713 if (!data)
1714 return -ENODEV;
1716 if (unlikely(lock_policy_rwsem_write(cpu)))
1717 return -EINVAL;
1719 dprintk("updating policy for CPU %u\n", cpu);
1720 memcpy(&policy, data, sizeof(struct cpufreq_policy));
1721 policy.min = data->user_policy.min;
1722 policy.max = data->user_policy.max;
1723 policy.policy = data->user_policy.policy;
1724 policy.governor = data->user_policy.governor;
1726 /* BIOS might change freq behind our back
1727 -> ask driver for current freq and notify governors about a change */
1728 if (cpufreq_driver->get) {
1729 policy.cur = cpufreq_driver->get(cpu);
1730 if (!data->cur) {
1731 dprintk("Driver did not initialize current freq");
1732 data->cur = policy.cur;
1733 } else {
1734 if (data->cur != policy.cur)
1735 cpufreq_out_of_sync(cpu, data->cur,
1736 policy.cur);
1740 ret = __cpufreq_set_policy(data, &policy);
1742 unlock_policy_rwsem_write(cpu);
1744 cpufreq_cpu_put(data);
1745 return ret;
1747 EXPORT_SYMBOL(cpufreq_update_policy);
1749 static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
1750 unsigned long action, void *hcpu)
1752 unsigned int cpu = (unsigned long)hcpu;
1753 struct sys_device *sys_dev;
1755 sys_dev = get_cpu_sysdev(cpu);
1756 if (sys_dev) {
1757 switch (action) {
1758 case CPU_ONLINE:
1759 case CPU_ONLINE_FROZEN:
1760 cpufreq_add_dev(sys_dev);
1761 break;
1762 case CPU_DOWN_PREPARE:
1763 case CPU_DOWN_PREPARE_FROZEN:
1764 if (unlikely(lock_policy_rwsem_write(cpu)))
1765 BUG();
1767 __cpufreq_remove_dev(sys_dev);
1768 break;
1769 case CPU_DOWN_FAILED:
1770 case CPU_DOWN_FAILED_FROZEN:
1771 cpufreq_add_dev(sys_dev);
1772 break;
1775 return NOTIFY_OK;
1778 static struct notifier_block __cpuinitdata cpufreq_cpu_notifier =
1780 .notifier_call = cpufreq_cpu_callback,
1783 /*********************************************************************
1784 * REGISTER / UNREGISTER CPUFREQ DRIVER *
1785 *********************************************************************/
1788 * cpufreq_register_driver - register a CPU Frequency driver
1789 * @driver_data: A struct cpufreq_driver containing the values#
1790 * submitted by the CPU Frequency driver.
1792 * Registers a CPU Frequency driver to this core code. This code
1793 * returns zero on success, -EBUSY when another driver got here first
1794 * (and isn't unregistered in the meantime).
1797 int cpufreq_register_driver(struct cpufreq_driver *driver_data)
1799 unsigned long flags;
1800 int ret;
1802 if (!driver_data || !driver_data->verify || !driver_data->init ||
1803 ((!driver_data->setpolicy) && (!driver_data->target)))
1804 return -EINVAL;
1806 dprintk("trying to register driver %s\n", driver_data->name);
1808 if (driver_data->setpolicy)
1809 driver_data->flags |= CPUFREQ_CONST_LOOPS;
1811 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1812 if (cpufreq_driver) {
1813 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1814 return -EBUSY;
1816 cpufreq_driver = driver_data;
1817 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1819 ret = sysdev_driver_register(&cpu_sysdev_class,&cpufreq_sysdev_driver);
1821 if ((!ret) && !(cpufreq_driver->flags & CPUFREQ_STICKY)) {
1822 int i;
1823 ret = -ENODEV;
1825 /* check for at least one working CPU */
1826 for (i=0; i<NR_CPUS; i++)
1827 if (cpufreq_cpu_data[i])
1828 ret = 0;
1830 /* if all ->init() calls failed, unregister */
1831 if (ret) {
1832 dprintk("no CPU initialized for driver %s\n",
1833 driver_data->name);
1834 sysdev_driver_unregister(&cpu_sysdev_class,
1835 &cpufreq_sysdev_driver);
1837 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1838 cpufreq_driver = NULL;
1839 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1843 if (!ret) {
1844 register_hotcpu_notifier(&cpufreq_cpu_notifier);
1845 dprintk("driver %s up and running\n", driver_data->name);
1846 cpufreq_debug_enable_ratelimit();
1849 return (ret);
1851 EXPORT_SYMBOL_GPL(cpufreq_register_driver);
1855 * cpufreq_unregister_driver - unregister the current CPUFreq driver
1857 * Unregister the current CPUFreq driver. Only call this if you have
1858 * the right to do so, i.e. if you have succeeded in initialising before!
1859 * Returns zero if successful, and -EINVAL if the cpufreq_driver is
1860 * currently not initialised.
1862 int cpufreq_unregister_driver(struct cpufreq_driver *driver)
1864 unsigned long flags;
1866 cpufreq_debug_disable_ratelimit();
1868 if (!cpufreq_driver || (driver != cpufreq_driver)) {
1869 cpufreq_debug_enable_ratelimit();
1870 return -EINVAL;
1873 dprintk("unregistering driver %s\n", driver->name);
1875 sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
1876 unregister_hotcpu_notifier(&cpufreq_cpu_notifier);
1878 spin_lock_irqsave(&cpufreq_driver_lock, flags);
1879 cpufreq_driver = NULL;
1880 spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
1882 return 0;
1884 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
1886 static int __init cpufreq_core_init(void)
1888 int cpu;
1890 for_each_possible_cpu(cpu) {
1891 per_cpu(policy_cpu, cpu) = -1;
1892 init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
1894 return 0;
1897 core_initcall(cpufreq_core_init);