brcmfmac: Protect tx seq number for data and control
[linux-2.6/btrfs-unstable.git] / drivers / irqchip / irq-gic.c
blob341c6016812de0e17fbd4c1601708723409351c5
1 /*
2 * linux/arch/arm/common/gic.c
4 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * Interrupt architecture for the GIC:
12 * o There is one Interrupt Distributor, which receives interrupts
13 * from system devices and sends them to the Interrupt Controllers.
15 * o There is one CPU Interface per CPU, which sends interrupts sent
16 * by the Distributor, and interrupts generated locally, to the
17 * associated CPU. The base address of the CPU interface is usually
18 * aliased so that the same address points to different chips depending
19 * on the CPU it is accessed from.
21 * Note that IRQs 0-31 are special - they are local to each CPU.
22 * As such, the enable set/clear, pending set/clear and active bit
23 * registers are banked per-cpu for these sources.
25 #include <linux/init.h>
26 #include <linux/kernel.h>
27 #include <linux/err.h>
28 #include <linux/module.h>
29 #include <linux/list.h>
30 #include <linux/smp.h>
31 #include <linux/cpu.h>
32 #include <linux/cpu_pm.h>
33 #include <linux/cpumask.h>
34 #include <linux/io.h>
35 #include <linux/of.h>
36 #include <linux/of_address.h>
37 #include <linux/of_irq.h>
38 #include <linux/irqdomain.h>
39 #include <linux/interrupt.h>
40 #include <linux/percpu.h>
41 #include <linux/slab.h>
42 #include <linux/irqchip/chained_irq.h>
43 #include <linux/irqchip/arm-gic.h>
45 #include <asm/irq.h>
46 #include <asm/exception.h>
47 #include <asm/smp_plat.h>
49 #include "irqchip.h"
51 union gic_base {
52 void __iomem *common_base;
53 void __percpu __iomem **percpu_base;
56 struct gic_chip_data {
57 union gic_base dist_base;
58 union gic_base cpu_base;
59 #ifdef CONFIG_CPU_PM
60 u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
61 u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
62 u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
63 u32 __percpu *saved_ppi_enable;
64 u32 __percpu *saved_ppi_conf;
65 #endif
66 struct irq_domain *domain;
67 unsigned int gic_irqs;
68 #ifdef CONFIG_GIC_NON_BANKED
69 void __iomem *(*get_base)(union gic_base *);
70 #endif
73 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
76 * The GIC mapping of CPU interfaces does not necessarily match
77 * the logical CPU numbering. Let's use a mapping as returned
78 * by the GIC itself.
80 #define NR_GIC_CPU_IF 8
81 static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
84 * Supported arch specific GIC irq extension.
85 * Default make them NULL.
87 struct irq_chip gic_arch_extn = {
88 .irq_eoi = NULL,
89 .irq_mask = NULL,
90 .irq_unmask = NULL,
91 .irq_retrigger = NULL,
92 .irq_set_type = NULL,
93 .irq_set_wake = NULL,
96 #ifndef MAX_GIC_NR
97 #define MAX_GIC_NR 1
98 #endif
100 static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
102 #ifdef CONFIG_GIC_NON_BANKED
103 static void __iomem *gic_get_percpu_base(union gic_base *base)
105 return *__this_cpu_ptr(base->percpu_base);
108 static void __iomem *gic_get_common_base(union gic_base *base)
110 return base->common_base;
113 static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
115 return data->get_base(&data->dist_base);
118 static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
120 return data->get_base(&data->cpu_base);
123 static inline void gic_set_base_accessor(struct gic_chip_data *data,
124 void __iomem *(*f)(union gic_base *))
126 data->get_base = f;
128 #else
129 #define gic_data_dist_base(d) ((d)->dist_base.common_base)
130 #define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
131 #define gic_set_base_accessor(d, f)
132 #endif
134 static inline void __iomem *gic_dist_base(struct irq_data *d)
136 struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
137 return gic_data_dist_base(gic_data);
140 static inline void __iomem *gic_cpu_base(struct irq_data *d)
142 struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
143 return gic_data_cpu_base(gic_data);
146 static inline unsigned int gic_irq(struct irq_data *d)
148 return d->hwirq;
152 * Routines to acknowledge, disable and enable interrupts
154 static void gic_mask_irq(struct irq_data *d)
156 u32 mask = 1 << (gic_irq(d) % 32);
158 raw_spin_lock(&irq_controller_lock);
159 writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
160 if (gic_arch_extn.irq_mask)
161 gic_arch_extn.irq_mask(d);
162 raw_spin_unlock(&irq_controller_lock);
165 static void gic_unmask_irq(struct irq_data *d)
167 u32 mask = 1 << (gic_irq(d) % 32);
169 raw_spin_lock(&irq_controller_lock);
170 if (gic_arch_extn.irq_unmask)
171 gic_arch_extn.irq_unmask(d);
172 writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
173 raw_spin_unlock(&irq_controller_lock);
176 static void gic_eoi_irq(struct irq_data *d)
178 if (gic_arch_extn.irq_eoi) {
179 raw_spin_lock(&irq_controller_lock);
180 gic_arch_extn.irq_eoi(d);
181 raw_spin_unlock(&irq_controller_lock);
184 writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
187 static int gic_set_type(struct irq_data *d, unsigned int type)
189 void __iomem *base = gic_dist_base(d);
190 unsigned int gicirq = gic_irq(d);
191 u32 enablemask = 1 << (gicirq % 32);
192 u32 enableoff = (gicirq / 32) * 4;
193 u32 confmask = 0x2 << ((gicirq % 16) * 2);
194 u32 confoff = (gicirq / 16) * 4;
195 bool enabled = false;
196 u32 val;
198 /* Interrupt configuration for SGIs can't be changed */
199 if (gicirq < 16)
200 return -EINVAL;
202 if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
203 return -EINVAL;
205 raw_spin_lock(&irq_controller_lock);
207 if (gic_arch_extn.irq_set_type)
208 gic_arch_extn.irq_set_type(d, type);
210 val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
211 if (type == IRQ_TYPE_LEVEL_HIGH)
212 val &= ~confmask;
213 else if (type == IRQ_TYPE_EDGE_RISING)
214 val |= confmask;
217 * As recommended by the spec, disable the interrupt before changing
218 * the configuration
220 if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
221 writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
222 enabled = true;
225 writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
227 if (enabled)
228 writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
230 raw_spin_unlock(&irq_controller_lock);
232 return 0;
235 static int gic_retrigger(struct irq_data *d)
237 if (gic_arch_extn.irq_retrigger)
238 return gic_arch_extn.irq_retrigger(d);
240 /* the genirq layer expects 0 if we can't retrigger in hardware */
241 return 0;
244 #ifdef CONFIG_SMP
245 static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
246 bool force)
248 void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
249 unsigned int shift = (gic_irq(d) % 4) * 8;
250 unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
251 u32 val, mask, bit;
253 if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
254 return -EINVAL;
256 raw_spin_lock(&irq_controller_lock);
257 mask = 0xff << shift;
258 bit = gic_cpu_map[cpu] << shift;
259 val = readl_relaxed(reg) & ~mask;
260 writel_relaxed(val | bit, reg);
261 raw_spin_unlock(&irq_controller_lock);
263 return IRQ_SET_MASK_OK;
265 #endif
267 #ifdef CONFIG_PM
268 static int gic_set_wake(struct irq_data *d, unsigned int on)
270 int ret = -ENXIO;
272 if (gic_arch_extn.irq_set_wake)
273 ret = gic_arch_extn.irq_set_wake(d, on);
275 return ret;
278 #else
279 #define gic_set_wake NULL
280 #endif
282 static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
284 u32 irqstat, irqnr;
285 struct gic_chip_data *gic = &gic_data[0];
286 void __iomem *cpu_base = gic_data_cpu_base(gic);
288 do {
289 irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
290 irqnr = irqstat & ~0x1c00;
292 if (likely(irqnr > 15 && irqnr < 1021)) {
293 irqnr = irq_find_mapping(gic->domain, irqnr);
294 handle_IRQ(irqnr, regs);
295 continue;
297 if (irqnr < 16) {
298 writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
299 #ifdef CONFIG_SMP
300 handle_IPI(irqnr, regs);
301 #endif
302 continue;
304 break;
305 } while (1);
308 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
310 struct gic_chip_data *chip_data = irq_get_handler_data(irq);
311 struct irq_chip *chip = irq_get_chip(irq);
312 unsigned int cascade_irq, gic_irq;
313 unsigned long status;
315 chained_irq_enter(chip, desc);
317 raw_spin_lock(&irq_controller_lock);
318 status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
319 raw_spin_unlock(&irq_controller_lock);
321 gic_irq = (status & 0x3ff);
322 if (gic_irq == 1023)
323 goto out;
325 cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
326 if (unlikely(gic_irq < 32 || gic_irq > 1020))
327 handle_bad_irq(cascade_irq, desc);
328 else
329 generic_handle_irq(cascade_irq);
331 out:
332 chained_irq_exit(chip, desc);
335 static struct irq_chip gic_chip = {
336 .name = "GIC",
337 .irq_mask = gic_mask_irq,
338 .irq_unmask = gic_unmask_irq,
339 .irq_eoi = gic_eoi_irq,
340 .irq_set_type = gic_set_type,
341 .irq_retrigger = gic_retrigger,
342 #ifdef CONFIG_SMP
343 .irq_set_affinity = gic_set_affinity,
344 #endif
345 .irq_set_wake = gic_set_wake,
348 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
350 if (gic_nr >= MAX_GIC_NR)
351 BUG();
352 if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0)
353 BUG();
354 irq_set_chained_handler(irq, gic_handle_cascade_irq);
357 static u8 gic_get_cpumask(struct gic_chip_data *gic)
359 void __iomem *base = gic_data_dist_base(gic);
360 u32 mask, i;
362 for (i = mask = 0; i < 32; i += 4) {
363 mask = readl_relaxed(base + GIC_DIST_TARGET + i);
364 mask |= mask >> 16;
365 mask |= mask >> 8;
366 if (mask)
367 break;
370 if (!mask)
371 pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
373 return mask;
376 static void __init gic_dist_init(struct gic_chip_data *gic)
378 unsigned int i;
379 u32 cpumask;
380 unsigned int gic_irqs = gic->gic_irqs;
381 void __iomem *base = gic_data_dist_base(gic);
383 writel_relaxed(0, base + GIC_DIST_CTRL);
386 * Set all global interrupts to be level triggered, active low.
388 for (i = 32; i < gic_irqs; i += 16)
389 writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
392 * Set all global interrupts to this CPU only.
394 cpumask = gic_get_cpumask(gic);
395 cpumask |= cpumask << 8;
396 cpumask |= cpumask << 16;
397 for (i = 32; i < gic_irqs; i += 4)
398 writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
401 * Set priority on all global interrupts.
403 for (i = 32; i < gic_irqs; i += 4)
404 writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
407 * Disable all interrupts. Leave the PPI and SGIs alone
408 * as these enables are banked registers.
410 for (i = 32; i < gic_irqs; i += 32)
411 writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
413 writel_relaxed(1, base + GIC_DIST_CTRL);
416 static void gic_cpu_init(struct gic_chip_data *gic)
418 void __iomem *dist_base = gic_data_dist_base(gic);
419 void __iomem *base = gic_data_cpu_base(gic);
420 unsigned int cpu_mask, cpu = smp_processor_id();
421 int i;
424 * Get what the GIC says our CPU mask is.
426 BUG_ON(cpu >= NR_GIC_CPU_IF);
427 cpu_mask = gic_get_cpumask(gic);
428 gic_cpu_map[cpu] = cpu_mask;
431 * Clear our mask from the other map entries in case they're
432 * still undefined.
434 for (i = 0; i < NR_GIC_CPU_IF; i++)
435 if (i != cpu)
436 gic_cpu_map[i] &= ~cpu_mask;
439 * Deal with the banked PPI and SGI interrupts - disable all
440 * PPI interrupts, ensure all SGI interrupts are enabled.
442 writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
443 writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
446 * Set priority on PPI and SGI interrupts
448 for (i = 0; i < 32; i += 4)
449 writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
451 writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
452 writel_relaxed(1, base + GIC_CPU_CTRL);
455 void gic_cpu_if_down(void)
457 void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
458 writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
461 #ifdef CONFIG_CPU_PM
463 * Saves the GIC distributor registers during suspend or idle. Must be called
464 * with interrupts disabled but before powering down the GIC. After calling
465 * this function, no interrupts will be delivered by the GIC, and another
466 * platform-specific wakeup source must be enabled.
468 static void gic_dist_save(unsigned int gic_nr)
470 unsigned int gic_irqs;
471 void __iomem *dist_base;
472 int i;
474 if (gic_nr >= MAX_GIC_NR)
475 BUG();
477 gic_irqs = gic_data[gic_nr].gic_irqs;
478 dist_base = gic_data_dist_base(&gic_data[gic_nr]);
480 if (!dist_base)
481 return;
483 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
484 gic_data[gic_nr].saved_spi_conf[i] =
485 readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
487 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
488 gic_data[gic_nr].saved_spi_target[i] =
489 readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
491 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
492 gic_data[gic_nr].saved_spi_enable[i] =
493 readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
497 * Restores the GIC distributor registers during resume or when coming out of
498 * idle. Must be called before enabling interrupts. If a level interrupt
499 * that occured while the GIC was suspended is still present, it will be
500 * handled normally, but any edge interrupts that occured will not be seen by
501 * the GIC and need to be handled by the platform-specific wakeup source.
503 static void gic_dist_restore(unsigned int gic_nr)
505 unsigned int gic_irqs;
506 unsigned int i;
507 void __iomem *dist_base;
509 if (gic_nr >= MAX_GIC_NR)
510 BUG();
512 gic_irqs = gic_data[gic_nr].gic_irqs;
513 dist_base = gic_data_dist_base(&gic_data[gic_nr]);
515 if (!dist_base)
516 return;
518 writel_relaxed(0, dist_base + GIC_DIST_CTRL);
520 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
521 writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
522 dist_base + GIC_DIST_CONFIG + i * 4);
524 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
525 writel_relaxed(0xa0a0a0a0,
526 dist_base + GIC_DIST_PRI + i * 4);
528 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
529 writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
530 dist_base + GIC_DIST_TARGET + i * 4);
532 for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
533 writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
534 dist_base + GIC_DIST_ENABLE_SET + i * 4);
536 writel_relaxed(1, dist_base + GIC_DIST_CTRL);
539 static void gic_cpu_save(unsigned int gic_nr)
541 int i;
542 u32 *ptr;
543 void __iomem *dist_base;
544 void __iomem *cpu_base;
546 if (gic_nr >= MAX_GIC_NR)
547 BUG();
549 dist_base = gic_data_dist_base(&gic_data[gic_nr]);
550 cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
552 if (!dist_base || !cpu_base)
553 return;
555 ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
556 for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
557 ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
559 ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
560 for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
561 ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
565 static void gic_cpu_restore(unsigned int gic_nr)
567 int i;
568 u32 *ptr;
569 void __iomem *dist_base;
570 void __iomem *cpu_base;
572 if (gic_nr >= MAX_GIC_NR)
573 BUG();
575 dist_base = gic_data_dist_base(&gic_data[gic_nr]);
576 cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
578 if (!dist_base || !cpu_base)
579 return;
581 ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
582 for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
583 writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
585 ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
586 for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
587 writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
589 for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
590 writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
592 writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
593 writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
596 static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
598 int i;
600 for (i = 0; i < MAX_GIC_NR; i++) {
601 #ifdef CONFIG_GIC_NON_BANKED
602 /* Skip over unused GICs */
603 if (!gic_data[i].get_base)
604 continue;
605 #endif
606 switch (cmd) {
607 case CPU_PM_ENTER:
608 gic_cpu_save(i);
609 break;
610 case CPU_PM_ENTER_FAILED:
611 case CPU_PM_EXIT:
612 gic_cpu_restore(i);
613 break;
614 case CPU_CLUSTER_PM_ENTER:
615 gic_dist_save(i);
616 break;
617 case CPU_CLUSTER_PM_ENTER_FAILED:
618 case CPU_CLUSTER_PM_EXIT:
619 gic_dist_restore(i);
620 break;
624 return NOTIFY_OK;
627 static struct notifier_block gic_notifier_block = {
628 .notifier_call = gic_notifier,
631 static void __init gic_pm_init(struct gic_chip_data *gic)
633 gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
634 sizeof(u32));
635 BUG_ON(!gic->saved_ppi_enable);
637 gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
638 sizeof(u32));
639 BUG_ON(!gic->saved_ppi_conf);
641 if (gic == &gic_data[0])
642 cpu_pm_register_notifier(&gic_notifier_block);
644 #else
645 static void __init gic_pm_init(struct gic_chip_data *gic)
648 #endif
650 #ifdef CONFIG_SMP
651 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
653 int cpu;
654 unsigned long flags, map = 0;
656 raw_spin_lock_irqsave(&irq_controller_lock, flags);
658 /* Convert our logical CPU mask into a physical one. */
659 for_each_cpu(cpu, mask)
660 map |= gic_cpu_map[cpu];
663 * Ensure that stores to Normal memory are visible to the
664 * other CPUs before issuing the IPI.
666 dsb();
668 /* this always happens on GIC0 */
669 writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
671 raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
673 #endif
675 #ifdef CONFIG_BL_SWITCHER
677 * gic_send_sgi - send a SGI directly to given CPU interface number
679 * cpu_id: the ID for the destination CPU interface
680 * irq: the IPI number to send a SGI for
682 void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
684 BUG_ON(cpu_id >= NR_GIC_CPU_IF);
685 cpu_id = 1 << cpu_id;
686 /* this always happens on GIC0 */
687 writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
691 * gic_get_cpu_id - get the CPU interface ID for the specified CPU
693 * @cpu: the logical CPU number to get the GIC ID for.
695 * Return the CPU interface ID for the given logical CPU number,
696 * or -1 if the CPU number is too large or the interface ID is
697 * unknown (more than one bit set).
699 int gic_get_cpu_id(unsigned int cpu)
701 unsigned int cpu_bit;
703 if (cpu >= NR_GIC_CPU_IF)
704 return -1;
705 cpu_bit = gic_cpu_map[cpu];
706 if (cpu_bit & (cpu_bit - 1))
707 return -1;
708 return __ffs(cpu_bit);
712 * gic_migrate_target - migrate IRQs to another CPU interface
714 * @new_cpu_id: the CPU target ID to migrate IRQs to
716 * Migrate all peripheral interrupts with a target matching the current CPU
717 * to the interface corresponding to @new_cpu_id. The CPU interface mapping
718 * is also updated. Targets to other CPU interfaces are unchanged.
719 * This must be called with IRQs locally disabled.
721 void gic_migrate_target(unsigned int new_cpu_id)
723 unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
724 void __iomem *dist_base;
725 int i, ror_val, cpu = smp_processor_id();
726 u32 val, cur_target_mask, active_mask;
728 if (gic_nr >= MAX_GIC_NR)
729 BUG();
731 dist_base = gic_data_dist_base(&gic_data[gic_nr]);
732 if (!dist_base)
733 return;
734 gic_irqs = gic_data[gic_nr].gic_irqs;
736 cur_cpu_id = __ffs(gic_cpu_map[cpu]);
737 cur_target_mask = 0x01010101 << cur_cpu_id;
738 ror_val = (cur_cpu_id - new_cpu_id) & 31;
740 raw_spin_lock(&irq_controller_lock);
742 /* Update the target interface for this logical CPU */
743 gic_cpu_map[cpu] = 1 << new_cpu_id;
746 * Find all the peripheral interrupts targetting the current
747 * CPU interface and migrate them to the new CPU interface.
748 * We skip DIST_TARGET 0 to 7 as they are read-only.
750 for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
751 val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
752 active_mask = val & cur_target_mask;
753 if (active_mask) {
754 val &= ~active_mask;
755 val |= ror32(active_mask, ror_val);
756 writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
760 raw_spin_unlock(&irq_controller_lock);
763 * Now let's migrate and clear any potential SGIs that might be
764 * pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
765 * is a banked register, we can only forward the SGI using
766 * GIC_DIST_SOFTINT. The original SGI source is lost but Linux
767 * doesn't use that information anyway.
769 * For the same reason we do not adjust SGI source information
770 * for previously sent SGIs by us to other CPUs either.
772 for (i = 0; i < 16; i += 4) {
773 int j;
774 val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
775 if (!val)
776 continue;
777 writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
778 for (j = i; j < i + 4; j++) {
779 if (val & 0xff)
780 writel_relaxed((1 << (new_cpu_id + 16)) | j,
781 dist_base + GIC_DIST_SOFTINT);
782 val >>= 8;
788 * gic_get_sgir_physaddr - get the physical address for the SGI register
790 * REturn the physical address of the SGI register to be used
791 * by some early assembly code when the kernel is not yet available.
793 static unsigned long gic_dist_physaddr;
795 unsigned long gic_get_sgir_physaddr(void)
797 if (!gic_dist_physaddr)
798 return 0;
799 return gic_dist_physaddr + GIC_DIST_SOFTINT;
802 void __init gic_init_physaddr(struct device_node *node)
804 struct resource res;
805 if (of_address_to_resource(node, 0, &res) == 0) {
806 gic_dist_physaddr = res.start;
807 pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
811 #else
812 #define gic_init_physaddr(node) do { } while (0)
813 #endif
815 static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
816 irq_hw_number_t hw)
818 if (hw < 32) {
819 irq_set_percpu_devid(irq);
820 irq_set_chip_and_handler(irq, &gic_chip,
821 handle_percpu_devid_irq);
822 set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
823 } else {
824 irq_set_chip_and_handler(irq, &gic_chip,
825 handle_fasteoi_irq);
826 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
828 irq_set_chip_data(irq, d->host_data);
829 return 0;
832 static int gic_irq_domain_xlate(struct irq_domain *d,
833 struct device_node *controller,
834 const u32 *intspec, unsigned int intsize,
835 unsigned long *out_hwirq, unsigned int *out_type)
837 if (d->of_node != controller)
838 return -EINVAL;
839 if (intsize < 3)
840 return -EINVAL;
842 /* Get the interrupt number and add 16 to skip over SGIs */
843 *out_hwirq = intspec[1] + 16;
845 /* For SPIs, we need to add 16 more to get the GIC irq ID number */
846 if (!intspec[0])
847 *out_hwirq += 16;
849 *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
850 return 0;
853 #ifdef CONFIG_SMP
854 static int gic_secondary_init(struct notifier_block *nfb, unsigned long action,
855 void *hcpu)
857 if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
858 gic_cpu_init(&gic_data[0]);
859 return NOTIFY_OK;
863 * Notifier for enabling the GIC CPU interface. Set an arbitrarily high
864 * priority because the GIC needs to be up before the ARM generic timers.
866 static struct notifier_block gic_cpu_notifier = {
867 .notifier_call = gic_secondary_init,
868 .priority = 100,
870 #endif
872 const struct irq_domain_ops gic_irq_domain_ops = {
873 .map = gic_irq_domain_map,
874 .xlate = gic_irq_domain_xlate,
877 void __init gic_init_bases(unsigned int gic_nr, int irq_start,
878 void __iomem *dist_base, void __iomem *cpu_base,
879 u32 percpu_offset, struct device_node *node)
881 irq_hw_number_t hwirq_base;
882 struct gic_chip_data *gic;
883 int gic_irqs, irq_base, i;
885 BUG_ON(gic_nr >= MAX_GIC_NR);
887 gic = &gic_data[gic_nr];
888 #ifdef CONFIG_GIC_NON_BANKED
889 if (percpu_offset) { /* Frankein-GIC without banked registers... */
890 unsigned int cpu;
892 gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
893 gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
894 if (WARN_ON(!gic->dist_base.percpu_base ||
895 !gic->cpu_base.percpu_base)) {
896 free_percpu(gic->dist_base.percpu_base);
897 free_percpu(gic->cpu_base.percpu_base);
898 return;
901 for_each_possible_cpu(cpu) {
902 unsigned long offset = percpu_offset * cpu_logical_map(cpu);
903 *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
904 *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
907 gic_set_base_accessor(gic, gic_get_percpu_base);
908 } else
909 #endif
910 { /* Normal, sane GIC... */
911 WARN(percpu_offset,
912 "GIC_NON_BANKED not enabled, ignoring %08x offset!",
913 percpu_offset);
914 gic->dist_base.common_base = dist_base;
915 gic->cpu_base.common_base = cpu_base;
916 gic_set_base_accessor(gic, gic_get_common_base);
920 * Initialize the CPU interface map to all CPUs.
921 * It will be refined as each CPU probes its ID.
923 for (i = 0; i < NR_GIC_CPU_IF; i++)
924 gic_cpu_map[i] = 0xff;
927 * For primary GICs, skip over SGIs.
928 * For secondary GICs, skip over PPIs, too.
930 if (gic_nr == 0 && (irq_start & 31) > 0) {
931 hwirq_base = 16;
932 if (irq_start != -1)
933 irq_start = (irq_start & ~31) + 16;
934 } else {
935 hwirq_base = 32;
939 * Find out how many interrupts are supported.
940 * The GIC only supports up to 1020 interrupt sources.
942 gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
943 gic_irqs = (gic_irqs + 1) * 32;
944 if (gic_irqs > 1020)
945 gic_irqs = 1020;
946 gic->gic_irqs = gic_irqs;
948 gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
949 irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
950 if (IS_ERR_VALUE(irq_base)) {
951 WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
952 irq_start);
953 irq_base = irq_start;
955 gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
956 hwirq_base, &gic_irq_domain_ops, gic);
957 if (WARN_ON(!gic->domain))
958 return;
960 if (gic_nr == 0) {
961 #ifdef CONFIG_SMP
962 set_smp_cross_call(gic_raise_softirq);
963 register_cpu_notifier(&gic_cpu_notifier);
964 #endif
965 set_handle_irq(gic_handle_irq);
968 gic_chip.flags |= gic_arch_extn.flags;
969 gic_dist_init(gic);
970 gic_cpu_init(gic);
971 gic_pm_init(gic);
974 #ifdef CONFIG_OF
975 static int gic_cnt __initdata;
977 int __init gic_of_init(struct device_node *node, struct device_node *parent)
979 void __iomem *cpu_base;
980 void __iomem *dist_base;
981 u32 percpu_offset;
982 int irq;
984 if (WARN_ON(!node))
985 return -ENODEV;
987 dist_base = of_iomap(node, 0);
988 WARN(!dist_base, "unable to map gic dist registers\n");
990 cpu_base = of_iomap(node, 1);
991 WARN(!cpu_base, "unable to map gic cpu registers\n");
993 if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
994 percpu_offset = 0;
996 gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
997 if (!gic_cnt)
998 gic_init_physaddr(node);
1000 if (parent) {
1001 irq = irq_of_parse_and_map(node, 0);
1002 gic_cascade_irq(gic_cnt, irq);
1004 gic_cnt++;
1005 return 0;
1007 IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
1008 IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
1009 IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
1010 IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
1012 #endif