arch/arm/mach-sa1100/pci-nanoengine.c

   1 /*
   2  * linux/arch/arm/mach-sa1100/pci-nanoengine.c
   3  *
   4  * PCI functions for BSE nanoEngine PCI
   5  *
   6  * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21  */
  22 #include <linux/kernel.h>
  23 #include <linux/irq.h>
  24 #include <linux/pci.h>
  25 #include <linux/spinlock.h>
  26
  27 #include <asm/mach/pci.h>
  28 #include <asm/mach-types.h>
  29
  30 #include <mach/nanoengine.h>
  31
  32 static DEFINE_SPINLOCK(nano_lock);
  33
  34 static int nanoengine_get_pci_address(struct pci_bus *bus,
  35         unsigned int devfn, int where, unsigned long *address)
  36 {
  37         int ret = PCIBIOS_DEVICE_NOT_FOUND;
  38         unsigned int busnr = bus->number;
  39
  40         *address = NANO_PCI_CONFIG_SPACE_VIRT +
  41                 ((bus->number << 16) | (devfn << 8) | (where & ~3));
  42
  43         ret = (busnr > 255 || devfn > 255 || where > 255) ?
  44                 PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
  45
  46         return ret;
  47 }
  48
  49 static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where,
  50         int size, u32 *val)
  51 {
  52         int ret;
  53         unsigned long address;
  54         unsigned long flags;
  55         u32 v;
  56
  57         /* nanoEngine PCI bridge does not return -1 for a non-existing
  58          * device. We must fake the answer. We know that the only valid
  59          * device is device zero at bus 0, which is the network chip. */
  60         if (bus->number != 0 || (devfn >> 3) != 0) {
  61                 v = -1;
  62                 nanoengine_get_pci_address(bus, devfn, where, &address);
  63                 goto exit_function;
  64         }
  65
  66         spin_lock_irqsave(&nano_lock, flags);
  67
  68         ret = nanoengine_get_pci_address(bus, devfn, where, &address);
  69         if (ret != PCIBIOS_SUCCESSFUL)
  70                 return ret;
  71         v = __raw_readl(address);
  72
  73         spin_unlock_irqrestore(&nano_lock, flags);
  74
  75         v >>= ((where & 3) * 8);
  76         v &= (unsigned long)(-1) >> ((4 - size) * 8);
  77
  78 exit_function:
  79         *val = v;
  80         return PCIBIOS_SUCCESSFUL;
  81 }
  82
  83 static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where,
  84         int size, u32 val)
  85 {
  86         int ret;
  87         unsigned long address;
  88         unsigned long flags;
  89         unsigned shift;
  90         u32 v;
  91
  92         shift = (where & 3) * 8;
  93
  94         spin_lock_irqsave(&nano_lock, flags);
  95
  96         ret = nanoengine_get_pci_address(bus, devfn, where, &address);
  97         if (ret != PCIBIOS_SUCCESSFUL)
  98                 return ret;
  99         v = __raw_readl(address);
 100         switch (size) {
 101         case 1:
 102                 v &= ~(0xFF << shift);
 103                 v |= val << shift;
 104                 break;
 105         case 2:
 106                 v &= ~(0xFFFF << shift);
 107                 v |= val << shift;
 108                 break;
 109         case 4:
 110                 v = val;
 111                 break;
 112         }
 113         __raw_writel(v, address);
 114
 115         spin_unlock_irqrestore(&nano_lock, flags);
 116
 117         return PCIBIOS_SUCCESSFUL;
 118 }
 119
 120 static struct pci_ops pci_nano_ops = {
 121         .read   = nanoengine_read_config,
 122         .write  = nanoengine_write_config,
 123 };
 124
 125 static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
 126         u8 pin)
 127 {
 128         return NANOENGINE_IRQ_GPIO_PCI;
 129 }
 130
 131 struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
 132 {
 133         return pci_scan_bus(sys->busnr, &pci_nano_ops, sys);
 134 }
 135
 136 static struct resource pci_io_ports = {
 137         .name   = "PCI IO",
 138         .start  = 0x400,
 139         .end    = 0x7FF,
 140         .flags  = IORESOURCE_IO,
 141 };
 142
 143 static struct resource pci_non_prefetchable_memory = {
 144         .name   = "PCI non-prefetchable",
 145         .start  = NANO_PCI_MEM_RW_PHYS,
 146         /* nanoEngine documentation says there is a 1 Megabyte window here,
 147          * but PCI reports just 128 + 8 kbytes. */
 148         .end    = NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
 149 /*      .end    = NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
 150         .flags  = IORESOURCE_MEM,
 151 };
 152
 153 /*
 154  * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
 155  * overlaps with previously defined memory.
 156  *
 157  * Here is what happens:
 158  *
 159 # dmesg
 160 ...
 161 pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
 162 pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
 163 pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
 164 pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
 165 pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
 166 pci 0000:00:00.0: supports D1 D2
 167 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
 168 pci 0000:00:00.0: PME# disabled
 169 PCI: bus0: Fast back to back transfers enabled
 170 pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
 171 pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
 172 pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
 173 pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
 174 pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
 175 pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
 176 pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
 177  *
 178  * On the other hand, if we do not request the prefetchable memory resource,
 179  * linux will alloc it first and the two non-prefetchable memory areas that
 180  * are our real interest will not be mapped. So we choose to map it to an
 181  * unused area. It gets recognized as expansion ROM, but becomes disabled.
 182  *
 183  * Here is what happens then:
 184  *
 185 # dmesg
 186 ...
 187 pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
 188 pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
 189 pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
 190 pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
 191 pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
 192 pci 0000:00:00.0: supports D1 D2
 193 pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
 194 pci 0000:00:00.0: PME# disabled
 195 PCI: bus0: Fast back to back transfers enabled
 196 pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
 197 pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
 198 pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
 199 pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
 200 pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
 201 pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
 202 pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
 203
 204 # lspci -vv -s 0000:00:00.0
 205 00:00.0 Class 0200: Device 8086:1209 (rev 09)
 206         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
 207         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
 208         Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
 209         Interrupt: pin A routed to IRQ 0
 210         Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
 211         Region 1: I/O ports at 0400 [size=64]
 212         Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
 213         [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
 214         Capabilities: [dc] Power Management version 2
 215                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 216                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
 217         Kernel driver in use: e100
 218         Kernel modules: e100
 219  *
 220  */
 221 static struct resource pci_prefetchable_memory = {
 222         .name   = "PCI prefetchable",
 223         .start  = 0x78000000,
 224         .end    = 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
 225         .flags  = IORESOURCE_MEM  | IORESOURCE_PREFETCH,
 226 };
 227
 228 static int __init pci_nanoengine_setup_resources(struct resource **resource)
 229 {
 230         if (request_resource(&ioport_resource, &pci_io_ports)) {
 231                 printk(KERN_ERR "PCI: unable to allocate io port region\n");
 232                 return -EBUSY;
 233         }
 234         if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
 235                 release_resource(&pci_io_ports);
 236                 printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
 237                 return -EBUSY;
 238         }
 239         if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
 240                 release_resource(&pci_io_ports);
 241                 release_resource(&pci_non_prefetchable_memory);
 242                 printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
 243                 return -EBUSY;
 244         }
 245         resource[0] = &pci_io_ports;
 246         resource[1] = &pci_non_prefetchable_memory;
 247         resource[2] = &pci_prefetchable_memory;
 248
 249         return 1;
 250 }
 251
 252 int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
 253 {
 254         int ret = 0;
 255
 256         pcibios_min_io = 0;
 257         pcibios_min_mem = 0;
 258
 259         if (nr == 0) {
 260                 sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
 261                 sys->io_offset = 0x400;
 262                 ret = pci_nanoengine_setup_resources(sys->resource);
 263                 /* Enable alternate memory bus master mode, see
 264                  * "Intel StrongARM SA1110 Developer's Manual",
 265                  * section 10.8, "Alternate Memory Bus Master Mode". */
 266                 GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
 267                 GAFR |= GPIO_MBGNT | GPIO_MBREQ;
 268                 TUCR |= TUCR_MBGPIO;
 269         }
 270
 271         return ret;
 272 }
 273
 274 static struct hw_pci nanoengine_pci __initdata = {
 275         .map_irq                = pci_nanoengine_map_irq,
 276         .nr_controllers         = 1,
 277         .scan                   = pci_nanoengine_scan_bus,
 278         .setup                  = pci_nanoengine_setup,
 279 };
 280
 281 static int __init nanoengine_pci_init(void)
 282 {
 283         if (machine_is_nanoengine())
 284                 pci_common_init(&nanoengine_pci);
 285         return 0;
 286 }
 287
 288 subsys_initcall(nanoengine_pci_init);