wl1251: only call ieee80211_beacon_loss in managed mode

[linux-2.6/btrfs-unstable.git] / drivers / staging / dgap / dgap.h

/*
 * Copyright 2003 Digi International (www.digi.com)
 *      Scott H Kilau <Scott_Kilau at digi dot com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
 * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 * PURPOSE.  See the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *      NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
 *
 *************************************************************************
 *
 * Driver includes
 *
 *************************************************************************/

#ifndef __DGAP_DRIVER_H
#define __DGAP_DRIVER_H

#include <linux/types.h>        /* To pick up the varions Linux types */
#include <linux/tty.h>          /* To pick up the various tty structs/defines */
#include <linux/interrupt.h>    /* For irqreturn_t type */

#ifndef TRUE
# define TRUE 1
#endif

#ifndef FALSE
# define FALSE 0
#endif

/* Required for our shared headers! */
typedef unsigned char           uchar;

#if !defined(TTY_FLIPBUF_SIZE)
# define TTY_FLIPBUF_SIZE 512
#endif

/*************************************************************************
 *
 * Driver defines
 *
 *************************************************************************/

/*
 * Driver identification
 */
#define DG_NAME         "dgap-1.3-16"
#define DG_PART         "40002347_C"
#define DRVSTR          "dgap"

/*
 * defines from dgap_pci.h
 */ 
#define PCIMAX 32                       /* maximum number of PCI boards */

#define DIGI_VID                0x114F

#define PCI_DEV_EPC_DID         0x0002
#define PCI_DEV_XEM_DID         0x0004
#define PCI_DEV_XR_DID          0x0005
#define PCI_DEV_CX_DID          0x0006
#define PCI_DEV_XRJ_DID         0x0009  /* PLX-based Xr adapter */
#define PCI_DEV_XR_IBM_DID      0x0011  /* IBM 8-port Async Adapter */
#define PCI_DEV_XR_BULL_DID     0x0013  /* BULL 8-port Async Adapter */
#define PCI_DEV_XR_SAIP_DID     0x001c  /* SAIP card - Xr adapter */
#define PCI_DEV_XR_422_DID      0x0012  /* Xr-422 */
#define PCI_DEV_920_2_DID       0x0034  /* XR-Plus 920 K, 2 port */
#define PCI_DEV_920_4_DID       0x0026  /* XR-Plus 920 K, 4 port */
#define PCI_DEV_920_8_DID       0x0027  /* XR-Plus 920 K, 8 port */
#define PCI_DEV_EPCJ_DID        0x000a  /* PLX 9060 chip for PCI  */
#define PCI_DEV_CX_IBM_DID      0x001b  /* IBM 128-port Async Adapter */
#define PCI_DEV_920_8_HP_DID    0x0058  /* HP XR-Plus 920 K, 8 port */
#define PCI_DEV_XEM_HP_DID      0x0059  /* HP Xem PCI */

#define PCI_DEV_XEM_NAME        "AccelePort XEM"
#define PCI_DEV_CX_NAME         "AccelePort CX"
#define PCI_DEV_XR_NAME         "AccelePort Xr"
#define PCI_DEV_XRJ_NAME        "AccelePort Xr (PLX)"
#define PCI_DEV_XR_SAIP_NAME    "AccelePort Xr (SAIP)"
#define PCI_DEV_920_2_NAME      "AccelePort Xr920 2 port"
#define PCI_DEV_920_4_NAME      "AccelePort Xr920 4 port"
#define PCI_DEV_920_8_NAME      "AccelePort Xr920 8 port"
#define PCI_DEV_XR_422_NAME     "AccelePort Xr 422"
#define PCI_DEV_EPCJ_NAME       "AccelePort EPC (PLX)"
#define PCI_DEV_XR_BULL_NAME    "AccelePort Xr (BULL)"
#define PCI_DEV_XR_IBM_NAME     "AccelePort Xr (IBM)"
#define PCI_DEV_CX_IBM_NAME     "AccelePort CX (IBM)"
#define PCI_DEV_920_8_HP_NAME   "AccelePort Xr920 8 port (HP)"
#define PCI_DEV_XEM_HP_NAME     "AccelePort XEM (HP)"

/*
 * On the PCI boards, there is no IO space allocated
 * The I/O registers will be in the first 3 bytes of the
 * upper 2MB of the 4MB memory space.  The board memory
 * will be mapped into the low 2MB of the 4MB memory space
 */

/* Potential location of PCI Bios from E0000 to FFFFF*/
#define PCI_BIOS_SIZE           0x00020000

/* Size of Memory and I/O for PCI (4MB) */
#define PCI_RAM_SIZE            0x00400000

/* Size of Memory (2MB) */
#define PCI_MEM_SIZE            0x00200000

/* Max PCI Window Size (2MB) */
#define PCI_WIN_SIZE            0x00200000

#define PCI_WIN_SHIFT           21 /* 21 bits max */

/* Offset of I/0 in Memory (2MB) */
#define PCI_IO_OFFSET           0x00200000

/* Size of IO (2MB) */
#define PCI_IO_SIZE             0x00200000

/* Number of boards we support at once. */
#define MAXBOARDS       32
#define MAXPORTS        224
#define MAXTTYNAMELEN   200

/* Our 3 magic numbers for our board, channel and unit structs */
#define DGAP_BOARD_MAGIC        0x5c6df104
#define DGAP_CHANNEL_MAGIC      0x6c6df104
#define DGAP_UNIT_MAGIC         0x7c6df104

/* Serial port types */
#define DGAP_SERIAL             0
#define DGAP_PRINT              1

#define SERIAL_TYPE_NORMAL      1

/* 4 extra for alignment play space */
#define WRITEBUFLEN             ((4096) + 4)
#define MYFLIPLEN               N_TTY_BUF_SIZE

#define SBREAK_TIME 0x25
#define U2BSIZE 0x400

#define dgap_jiffies_from_ms(a) (((a) * HZ) / 1000)

/*
 * Our major for the mgmt devices.
 *
 * We can use 22, because Digi was allocated 22 and 23 for the epca driver.
 * 22 has now become obsolete now that the "cu" devices have
 * been removed from 2.6.
 * Also, this *IS* the epca driver, just PCI only now.
 */
#ifndef DIGI_DGAP_MAJOR
# define DIGI_DGAP_MAJOR         22
#endif

/*
 * The parameters we use to define the periods of the moving averages.
 */
#define         MA_PERIOD       (HZ / 10)
#define         SMA_DUR         (1 * HZ)
#define         EMA_DUR         (1 * HZ)
#define         SMA_NPERIODS    (SMA_DUR / MA_PERIOD)
#define         EMA_NPERIODS    (EMA_DUR / MA_PERIOD)

/*
 * Define a local default termios struct. All ports will be created
 * with this termios initially.  This is the same structure that is defined
 * as the default in tty_io.c with the same settings overriden as in serial.c
 *
 * In short, this should match the internal serial ports' defaults.
 */
#define DEFAULT_IFLAGS  (ICRNL | IXON)
#define DEFAULT_OFLAGS  (OPOST | ONLCR)
#define DEFAULT_CFLAGS  (B9600 | CS8 | CREAD | HUPCL | CLOCAL)
#define DEFAULT_LFLAGS  (ISIG | ICANON | ECHO | ECHOE | ECHOK | \
                        ECHOCTL | ECHOKE | IEXTEN)

#ifndef _POSIX_VDISABLE
#define   _POSIX_VDISABLE '\0'
#endif

#define SNIFF_MAX       65536           /* Sniff buffer size (2^n) */
#define SNIFF_MASK      (SNIFF_MAX - 1) /* Sniff wrap mask */

#define VPDSIZE (512)

/************************************************************************
 *      FEP memory offsets
 ************************************************************************/
#define START           0x0004L         /* Execution start address      */

#define CMDBUF          0x0d10L         /* Command (cm_t) structure offset */
#define CMDSTART        0x0400L         /* Start of command buffer      */
#define CMDMAX          0x0800L         /* End of command buffer        */

#define EVBUF           0x0d18L         /* Event (ev_t) structure       */
#define EVSTART         0x0800L         /* Start of event buffer        */
#define EVMAX           0x0c00L         /* End of event buffer          */
#define FEP5_PLUS       0x0E40          /* ASCII '5' and ASCII 'A' is here  */
#define ECS_SEG         0x0E44          /* Segment of the extended channel structure */
#define LINE_SPEED      0x10            /* Offset into ECS_SEG for line speed   */
                                        /* if the fep has extended capabilities */

/* BIOS MAGIC SPOTS */
#define ERROR           0x0C14L         /* BIOS error code              */
#define SEQUENCE        0x0C12L         /* BIOS sequence indicator      */
#define POSTAREA        0x0C00L         /* POST complete message area   */

/* FEP MAGIC SPOTS */
#define FEPSTAT         POSTAREA        /* OS here when FEP comes up    */
#define NCHAN           0x0C02L         /* number of ports FEP sees     */
#define PANIC           0x0C10L         /* PANIC area for FEP           */
#define KMEMEM          0x0C30L         /* Memory for KME use           */
#define CONFIG          0x0CD0L         /* Concentrator configuration info */
#define CONFIGSIZE      0x0030          /* configuration info size      */
#define DOWNREQ         0x0D00          /* Download request buffer pointer */

#define CHANBUF         0x1000L         /* Async channel (bs_t) structs */
#define FEPOSSIZE       0x1FFF          /* 8K FEPOS                     */

#define XEMPORTS    0xC02       /*
                                 * Offset in board memory where FEP5 stores
                                 * how many ports it has detected.
                                 * NOTE: FEP5 reports 64 ports when the user
                                 * has the cable in EBI OUT instead of EBI IN.
                                 */

#define FEPCLR      0x00
#define FEPMEM      0x02
#define FEPRST      0x04
#define FEPINT      0x08
#define FEPMASK     0x0e
#define FEPWIN      0x80

#define LOWMEM      0x0100
#define HIGHMEM     0x7f00

#define FEPTIMEOUT 200000

#define ENABLE_INTR             0x0e04          /* Enable interrupts flag */
#define FEPPOLL_MIN             1               /* minimum of 1 millisecond */
#define FEPPOLL_MAX             20              /* maximum of 20 milliseconds */
#define FEPPOLL                 0x0c26          /* Fep event poll interval */

#define IALTPIN                 0x0080          /* Input flag to swap DSR <-> DCD */

/************************************************************************
 * FEP supported functions
 ************************************************************************/
#define SRLOW           0xe0            /* Set receive low water        */
#define SRHIGH          0xe1            /* Set receive high water       */
#define FLUSHTX         0xe2            /* Flush transmit buffer        */
#define PAUSETX         0xe3            /* Pause data transmission      */
#define RESUMETX        0xe4            /* Resume data transmission     */
#define SMINT           0xe5            /* Set Modem Interrupt          */
#define SAFLOWC         0xe6            /* Set Aux. flow control chars  */
#define SBREAK          0xe8            /* Send break                   */
#define SMODEM          0xe9            /* Set 8530 modem control lines */
#define SIFLAG          0xea            /* Set UNIX iflags              */
#define SFLOWC          0xeb            /* Set flow control characters  */
#define STLOW           0xec            /* Set transmit low water mark  */
#define RPAUSE          0xee            /* Pause receive                */
#define RRESUME         0xef            /* Resume receive               */
#define CHRESET         0xf0            /* Reset Channel                */
#define BUFSETALL       0xf2            /* Set Tx & Rx buffer size avail*/
#define SOFLAG          0xf3            /* Set UNIX oflags              */
#define SHFLOW          0xf4            /* Set hardware handshake       */
#define SCFLAG          0xf5            /* Set UNIX cflags              */
#define SVNEXT          0xf6            /* Set VNEXT character          */
#define SPINTFC         0xfc            /* Reserved                     */
#define SCOMMODE        0xfd            /* Set RS232/422 mode           */


/************************************************************************
 *      Modes for SCOMMODE
 ************************************************************************/
#define MODE_232        0x00
#define MODE_422        0x01


/************************************************************************
 *      Event flags.
 ************************************************************************/
#define IFBREAK         0x01            /* Break received               */
#define IFTLW           0x02            /* Transmit low water           */
#define IFTEM           0x04            /* Transmitter empty            */
#define IFDATA          0x08            /* Receive data present         */
#define IFMODEM         0x20            /* Modem status change          */

/************************************************************************
 *      Modem flags
 ************************************************************************/
#       define  DM_RTS          0x02    /* Request to send              */
#       define  DM_CD           0x80    /* Carrier detect               */
#       define  DM_DSR          0x20    /* Data set ready               */
#       define  DM_CTS          0x10    /* Clear to send                */
#       define  DM_RI           0x40    /* Ring indicator               */
#       define  DM_DTR          0x01    /* Data terminal ready          */

/*
 * defines from dgap_conf.h
 */
#define NULLNODE 0              /* header node, not used */
#define BNODE 1                 /* Board node */
#define LNODE 2                 /* Line node */
#define CNODE 3                 /* Concentrator node */
#define MNODE 4                 /* EBI Module node */
#define TNODE 5                 /* tty name prefix node */
#define CUNODE 6                /* cu name prefix (non-SCO) */
#define PNODE 7                 /* trans. print prefix node */
#define JNODE 8                 /* maJor number node */
#define ANODE 9                 /* altpin */
#define TSNODE 10               /* tty structure size */
#define CSNODE 11               /* channel structure size */
#define BSNODE 12               /* board structure size */
#define USNODE 13               /* unit schedule structure size */
#define FSNODE 14               /* f2200 structure size */
#define VSNODE 15               /* size of VPIX structures */
#define INTRNODE 16             /* enable interrupt */

/* Enumeration of tokens */
#define BEGIN   1
#define END     2
#define BOARD   10

#define EPCFS   11 /* start of EPC family definitions */
#define ICX             11
#define MCX             13
#define PCX     14
#define IEPC    15
#define EEPC    16
#define MEPC    17
#define IPCM    18
#define EPCM    19
#define MPCM    20
#define PEPC    21
#define PPCM    22
#ifdef CP
#define ICP     23
#define ECP     24
#define MCP     25
#endif
#define EPCFE   25 /* end of EPC family definitions */
#define PC2E    26
#define PC4E    27
#define PC4E8K  28
#define PC8E    29
#define PC8E8K  30
#define PC16E   31
#define MC2E8K  34
#define MC4E8K  35
#define MC8E8K  36

#define AVANFS  42      /* start of Avanstar family definitions */
#define A8P     42
#define A16P    43
#define AVANFE  43      /* end of Avanstar family definitions */

#define DA2000FS        44      /* start of AccelePort 2000 family definitions */
#define DA22            44 /* AccelePort 2002 */
#define DA24            45 /* AccelePort 2004 */
#define DA28            46 /* AccelePort 2008 */
#define DA216           47 /* AccelePort 2016 */
#define DAR4            48 /* AccelePort RAS 4 port */
#define DAR8            49 /* AccelePort RAS 8 port */
#define DDR24           50 /* DataFire RAS 24 port */
#define DDR30           51 /* DataFire RAS 30 port */
#define DDR48           52 /* DataFire RAS 48 port */
#define DDR60           53 /* DataFire RAS 60 port */
#define DA2000FE        53 /* end of AccelePort 2000/RAS family definitions */

#define PCXRFS  106     /* start of PCXR family definitions */
#define APORT4  106
#define APORT8  107
#define PAPORT4 108
#define PAPORT8 109
#define APORT4_920I     110
#define APORT8_920I     111
#define APORT4_920P     112
#define APORT8_920P     113
#define APORT2_920P 114
#define PCXRFE  117     /* end of PCXR family definitions */

#define LINE    82
#ifdef T1
#define T1M     83
#define E1M     84
#endif
#define CONC    64
#define CX      65
#define EPC     66
#define MOD     67
#define PORTS   68
#define METHOD  69
#define CUSTOM  70
#define BASIC   71
#define STATUS  72
#define MODEM   73
/* The following tokens can appear in multiple places */
#define SPEED   74
#define NPORTS  75
#define ID      76
#define CABLE   77
#define CONNECT 78
#define IO      79
#define MEM     80
#define DPSZ    81

#define TTYN    90
#define CU      91
#define PRINT   92
#define XPRINT  93
#define CMAJOR   94
#define ALTPIN  95
#define STARTO 96
#define USEINTR  97
#define PCIINFO  98

#define TTSIZ   100
#define CHSIZ   101
#define BSSIZ   102
#define UNTSIZ  103
#define F2SIZ   104
#define VPSIZ   105

#define TOTAL_BOARD     2
#define CURRENT_BRD     4
#define BOARD_TYPE      6
#define IO_ADDRESS      8
#define MEM_ADDRESS     10

#define FIELDS_PER_PAGE 18

#define TB_FIELD        1
#define CB_FIELD        3
#define BT_FIELD        5
#define IO_FIELD        7
#define ID_FIELD        8
#define ME_FIELD        9
#define TTY_FIELD       11
#define CU_FIELD        13
#define PR_FIELD        15
#define MPR_FIELD       17

#define MAX_FIELD       512

#define INIT            0
#define NITEMS          128
#define MAX_ITEM        512

#define DSCRINST        1
#define DSCRNUM         3
#define ALTPINQ         5
#define SSAVE           7

#define DSCR            "32"
#define ONETONINE       "123456789"
#define ALL             "1234567890"

/*
 * All the possible states the driver can be while being loaded.
 */
enum {
        DRIVER_INITIALIZED = 0,
        DRIVER_READY
};

/*
 * All the possible states the board can be while booting up.
 */
enum {
        BOARD_FAILED = 0,
        BOARD_READY
};

/*
 * All the possible states that a requested concentrator image can be in.
 */
enum {
        NO_PENDING_CONCENTRATOR_REQUESTS = 0,
        NEED_CONCENTRATOR,
        REQUESTED_CONCENTRATOR
};



/*
 * Modem line constants are defined as macros because DSR and
 * DCD are swapable using the ditty altpin option.
 */
#define D_CD(ch)        ch->ch_cd       /* Carrier detect       */
#define D_DSR(ch)       ch->ch_dsr      /* Data set ready       */
#define D_RTS(ch)       DM_RTS          /* Request to send      */
#define D_CTS(ch)       DM_CTS          /* Clear to send        */
#define D_RI(ch)        DM_RI           /* Ring indicator       */
#define D_DTR(ch)       DM_DTR          /* Data terminal ready  */


/*************************************************************************
 *
 * Structures and closely related defines.
 *
 *************************************************************************/


/*
 * A structure to hold a statistics counter.  We also
 * compute moving averages for this counter.
 */
struct macounter {
        u32             cnt;    /* Total count */
        ulong           accum;  /* Acuumulator per period */
        ulong           sma;    /* Simple moving average */
        ulong           ema;    /* Exponential moving average */
};


/************************************************************************
 * Device flag definitions for bd_flags.
 ************************************************************************/
#define BD_FEP5PLUS     0x0001          /* Supports FEP5 Plus commands */
#define BD_HAS_VPD      0x0002          /* Board has VPD info available */

/*
 *      Per-board information
 */
struct board_t {
        int             magic;          /* Board Magic number.  */
        int             boardnum;       /* Board number: 0-3 */
        int             firstminor;     /* First minor, e.g. 0, 30, 60 */

        int             type;           /* Type of board */
        char            *name;          /* Product Name */
        struct pci_dev  *pdev;          /* Pointer to the pci_dev struct */
        u16             vendor;         /* PCI vendor ID */
        u16             device;         /* PCI device ID */
        u16             subvendor;      /* PCI subsystem vendor ID */
        u16             subdevice;      /* PCI subsystem device ID */
        uchar           rev;            /* PCI revision ID */
        uint            pci_bus;        /* PCI bus value */
        uint            pci_slot;       /* PCI slot value */
        u16             maxports;       /* MAX ports this board can handle */
        uchar           vpd[VPDSIZE];   /* VPD of board, if found */
        u32             bd_flags;       /* Board flags */

        spinlock_t      bd_lock;        /* Used to protect board */

        u32             state;          /* State of card. */
        wait_queue_head_t state_wait;   /* Place to sleep on for state change */

        struct          tasklet_struct helper_tasklet; /* Poll helper tasklet */

        u32             wait_for_bios;
        u32             wait_for_fep;

        struct cnode    *bd_config;     /* Config of board */

        u16             nasync;         /* Number of ports on card */

        u32             use_interrupts; /* Should we be interrupt driven? */
        ulong           irq;            /* Interrupt request number */
        ulong           intr_count;     /* Count of interrupts */
        u32             intr_used;      /* Non-zero if using interrupts */
        u32             intr_running;   /* Non-zero if FEP knows its doing interrupts */

        ulong           port;           /* Start of base io port of the card */
        ulong           port_end;       /* End of base io port of the card */
        ulong           membase;        /* Start of base memory of the card */
        ulong           membase_end;    /* End of base memory of the card */

        uchar           *re_map_port;   /* Remapped io port of the card */
        uchar           *re_map_membase;/* Remapped memory of the card */

        uchar           runwait;        /* # Processes waiting for FEP  */
        uchar           inhibit_poller; /* Tells  the poller to leave us alone */

        struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */

        struct tty_driver       *SerialDriver;
        struct tty_port *SerialPorts;
        char            SerialName[200];
        struct tty_driver       *PrintDriver;
        struct tty_port *PrinterPorts;
        char            PrintName[200];

        u32             dgap_Major_Serial_Registered;
        u32             dgap_Major_TransparentPrint_Registered;

        u32             dgap_Serial_Major;
        u32             dgap_TransparentPrint_Major;

        struct bs_t     *bd_bs;                 /* Base structure pointer       */

        char    *flipbuf;               /* Our flip buffer, alloced if board is found */
        char    *flipflagbuf;           /* Our flip flag buffer, alloced if board is found */

        u16             dpatype;        /* The board "type", as defined by DPA */
        u16             dpastatus;      /* The board "status", as defined by DPA */
        wait_queue_head_t kme_wait;     /* Needed for DPA support */

        u32             conc_dl_status; /* Status of any pending conc download */
};



/************************************************************************
 * Unit flag definitions for un_flags.
 ************************************************************************/
#define UN_ISOPEN       0x0001          /* Device is open               */
#define UN_CLOSING      0x0002          /* Line is being closed         */
#define UN_IMM          0x0004          /* Service immediately          */
#define UN_BUSY         0x0008          /* Some work this channel       */
#define UN_BREAKI       0x0010          /* Input break received         */
#define UN_PWAIT        0x0020          /* Printer waiting for terminal */
#define UN_TIME         0x0040          /* Waiting on time              */
#define UN_EMPTY        0x0080          /* Waiting output queue empty   */
#define UN_LOW          0x0100          /* Waiting output low water mark*/
#define UN_EXCL_OPEN    0x0200          /* Open for exclusive use       */
#define UN_WOPEN        0x0400          /* Device waiting for open      */
#define UN_WIOCTL       0x0800          /* Device waiting for open      */
#define UN_HANGUP       0x8000          /* Carrier lost                 */

struct device;

/************************************************************************
 * Structure for terminal or printer unit.
 ************************************************************************/
struct un_t {
        int     magic;          /* Unit Magic Number.                   */
        struct  channel_t *un_ch;
        u32     un_time;
        u32     un_type;
        u32     un_open_count;  /* Counter of opens to port             */
        struct tty_struct *un_tty;/* Pointer to unit tty structure      */
        u32     un_flags;       /* Unit flags                           */
        wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */
        u32     un_dev;         /* Minor device number                  */
        tcflag_t un_oflag;      /* oflags being done on board           */
        tcflag_t un_lflag;      /* lflags being done on board           */
        struct device *un_sysfs;
};


/************************************************************************
 * Device flag definitions for ch_flags.
 ************************************************************************/
#define CH_PRON         0x0001          /* Printer on string                */
#define CH_OUT          0x0002          /* Dial-out device open             */
#define CH_STOP         0x0004          /* Output is stopped                */
#define CH_STOPI        0x0008          /* Input is stopped                 */
#define CH_CD           0x0010          /* Carrier is present               */
#define CH_FCAR         0x0020          /* Carrier forced on                */

#define CH_RXBLOCK      0x0080          /* Enable rx blocked flag           */
#define CH_WLOW         0x0100          /* Term waiting low event           */
#define CH_WEMPTY       0x0200          /* Term waiting empty event         */
#define CH_RENABLE      0x0400          /* Buffer just emptied          */
#define CH_RACTIVE      0x0800          /* Process active in xxread()   */
#define CH_RWAIT        0x1000          /* Process waiting in xxread()  */
#define CH_BAUD0        0x2000          /* Used for checking B0 transitions */
#define CH_HANGUP       0x8000          /* Hangup received                  */

/*
 * Definitions for ch_sniff_flags
 */
#define SNIFF_OPEN      0x1
#define SNIFF_WAIT_DATA 0x2
#define SNIFF_WAIT_SPACE 0x4


/************************************************************************
 ***    Definitions for Digi ditty(1) command.
 ************************************************************************/

/************************************************************************
 * This module provides application access to special Digi
 * serial line enhancements which are not standard UNIX(tm) features.
 ************************************************************************/

#if !defined(TIOCMODG)

#define TIOCMODG        (('d'<<8) | 250)                /* get modem ctrl state */
#define TIOCMODS        (('d'<<8) | 251)                /* set modem ctrl state */

#ifndef TIOCM_LE
#define         TIOCM_LE        0x01            /* line enable          */
#define         TIOCM_DTR       0x02            /* data terminal ready  */
#define         TIOCM_RTS       0x04            /* request to send      */
#define         TIOCM_ST        0x08            /* secondary transmit   */
#define         TIOCM_SR        0x10            /* secondary receive    */
#define         TIOCM_CTS       0x20            /* clear to send        */
#define         TIOCM_CAR       0x40            /* carrier detect       */
#define         TIOCM_RNG       0x80            /* ring indicator       */
#define         TIOCM_DSR       0x100           /* data set ready       */
#define         TIOCM_RI        TIOCM_RNG       /* ring (alternate)     */
#define         TIOCM_CD        TIOCM_CAR       /* carrier detect (alt) */
#endif

#endif

#if !defined(TIOCMSET)
#define TIOCMSET        (('d'<<8) | 252)                /* set modem ctrl state */
#define TIOCMGET        (('d'<<8) | 253)                /* set modem ctrl state */
#endif

#if !defined(TIOCMBIC)
#define TIOCMBIC        (('d'<<8) | 254)                /* set modem ctrl state */
#define TIOCMBIS        (('d'<<8) | 255)                /* set modem ctrl state */
#endif


#if !defined(TIOCSDTR)
#define TIOCSDTR        (('e'<<8) | 0)          /* set DTR              */
#define TIOCCDTR        (('e'<<8) | 1)          /* clear DTR            */
#endif

/************************************************************************
 * Ioctl command arguments for DIGI parameters.
 ************************************************************************/
#define DIGI_GETA       (('e'<<8) | 94)         /* Read params          */

#define DIGI_SETA       (('e'<<8) | 95)         /* Set params           */
#define DIGI_SETAW      (('e'<<8) | 96)         /* Drain & set params   */
#define DIGI_SETAF      (('e'<<8) | 97)         /* Drain, flush & set params */

#define DIGI_KME        (('e'<<8) | 98)         /* Read/Write Host      */
                                                /* Adapter Memory       */

#define DIGI_GETFLOW    (('e'<<8) | 99)         /* Get startc/stopc flow */
                                                /* control characters    */
#define DIGI_SETFLOW    (('e'<<8) | 100)                /* Set startc/stopc flow */
                                                /* control characters    */
#define DIGI_GETAFLOW   (('e'<<8) | 101)                /* Get Aux. startc/stopc */
                                                /* flow control chars    */
#define DIGI_SETAFLOW   (('e'<<8) | 102)                /* Set Aux. startc/stopc */
                                                /* flow control chars    */

#define DIGI_GEDELAY    (('d'<<8) | 246)                /* Get edelay */
#define DIGI_SEDELAY    (('d'<<8) | 247)                /* Set edelay */

struct  digiflow_t {
        unsigned char   startc;                         /* flow cntl start char */
        unsigned char   stopc;                          /* flow cntl stop char  */
};


#ifdef  FLOW_2200
#define F2200_GETA      (('e'<<8) | 104)                /* Get 2x36 flow cntl flags */
#define F2200_SETAW     (('e'<<8) | 105)                /* Set 2x36 flow cntl flags */
#define         F2200_MASK      0x03            /* 2200 flow cntl bit mask  */
#define         FCNTL_2200      0x01            /* 2x36 terminal flow cntl  */
#define         PCNTL_2200      0x02            /* 2x36 printer flow cntl   */
#define F2200_XON       0xf8
#define P2200_XON       0xf9
#define F2200_XOFF      0xfa
#define P2200_XOFF      0xfb

#define FXOFF_MASK      0x03                    /* 2200 flow status mask    */
#define RCVD_FXOFF      0x01                    /* 2x36 Terminal XOFF rcvd  */
#define RCVD_PXOFF      0x02                    /* 2x36 Printer XOFF rcvd   */
#endif

/************************************************************************
 * Values for digi_flags
 ************************************************************************/
#define DIGI_IXON       0x0001          /* Handle IXON in the FEP       */
#define DIGI_FAST       0x0002          /* Fast baud rates              */
#define RTSPACE         0x0004          /* RTS input flow control       */
#define CTSPACE         0x0008          /* CTS output flow control      */
#define DSRPACE         0x0010          /* DSR output flow control      */
#define DCDPACE         0x0020          /* DCD output flow control      */
#define DTRPACE         0x0040          /* DTR input flow control       */
#define DIGI_COOK       0x0080          /* Cooked processing done in FEP */
#define DIGI_FORCEDCD   0x0100          /* Force carrier                */
#define DIGI_ALTPIN     0x0200          /* Alternate RJ-45 pin config   */
#define DIGI_AIXON      0x0400          /* Aux flow control in fep      */
#define DIGI_PRINTER    0x0800          /* Hold port open for flow cntrl*/
#define DIGI_PP_INPUT   0x1000          /* Change parallel port to input*/
#define DIGI_DTR_TOGGLE 0x2000          /* Support DTR Toggle           */
#define DIGI_422        0x4000          /* for 422/232 selectable panel */
#define DIGI_RTS_TOGGLE 0x8000          /* Support RTS Toggle           */

/************************************************************************
 * These options are not supported on the comxi.
 ************************************************************************/
#define DIGI_COMXI      (DIGI_FAST|DIGI_COOK|DSRPACE|DCDPACE|DTRPACE)

#define DIGI_PLEN       28              /* String length                */
#define DIGI_TSIZ       10              /* Terminal string len          */

/************************************************************************
 * Structure used with ioctl commands for DIGI parameters.
 ************************************************************************/
struct digi_t {
        unsigned short  digi_flags;             /* Flags (see above)    */
        unsigned short  digi_maxcps;            /* Max printer CPS      */
        unsigned short  digi_maxchar;           /* Max chars in print queue */
        unsigned short  digi_bufsize;           /* Buffer size          */
        unsigned char   digi_onlen;             /* Length of ON string  */
        unsigned char   digi_offlen;            /* Length of OFF string */
        char            digi_onstr[DIGI_PLEN];  /* Printer on string    */
        char            digi_offstr[DIGI_PLEN]; /* Printer off string   */
        char            digi_term[DIGI_TSIZ];   /* terminal string      */
};

/************************************************************************
 * KME definitions and structures.
 ************************************************************************/
#define RW_IDLE         0       /* Operation complete                   */
#define RW_READ         1       /* Read Concentrator Memory             */
#define RW_WRITE        2       /* Write Concentrator Memory            */

struct rw_t {
        unsigned char   rw_req;         /* Request type                 */
        unsigned char   rw_board;       /* Host Adapter board number    */
        unsigned char   rw_conc;        /* Concentrator number          */
        unsigned char   rw_reserved;    /* Reserved for expansion       */
        unsigned long   rw_addr;        /* Address in concentrator      */
        unsigned short  rw_size;        /* Read/write request length    */
        unsigned char   rw_data[128];   /* Data to read/write           */
};

/***********************************************************************
 * Shrink Buffer and Board Information definitions and structures.

 ************************************************************************/
                        /* Board type return codes */
#define PCXI_TYPE 1     /* Board type at the designated port is a PC/Xi */
#define PCXM_TYPE 2     /* Board type at the designated port is a PC/Xm */
#define PCXE_TYPE 3     /* Board type at the designated port is a PC/Xe */
#define MCXI_TYPE 4     /* Board type at the designated port is a MC/Xi */
#define COMXI_TYPE 5     /* Board type at the designated port is a COM/Xi */

                         /* Non-Zero Result codes. */
#define RESULT_NOBDFND 1 /* A Digi product at that port is not config installed */
#define RESULT_NODESCT 2 /* A memory descriptor was not obtainable */
#define RESULT_NOOSSIG 3 /* FEP/OS signature was not detected on the board */
#define RESULT_TOOSML  4 /* Too small an area to shrink.  */
#define RESULT_NOCHAN  5 /* Channel structure for the board was not found */

struct shrink_buf_struct {
        unsigned long   shrink_buf_vaddr;       /* Virtual address of board */
        unsigned long   shrink_buf_phys;        /* Physical address of board */
        unsigned long   shrink_buf_bseg;        /* Amount of board memory */
        unsigned long   shrink_buf_hseg;        /* '186 Beginning of Dual-Port */

        unsigned long   shrink_buf_lseg;        /* '186 Beginning of freed memory                                               */
        unsigned long   shrink_buf_mseg;        /* Linear address from start of
                                                   dual-port were freed memory
                                                   begins, host viewpoint. */

        unsigned long   shrink_buf_bdparam;     /* Parameter for xxmemon and
                                                   xxmemoff */

        unsigned long   shrink_buf_reserva;     /* Reserved */
        unsigned long   shrink_buf_reservb;     /* Reserved */
        unsigned long   shrink_buf_reservc;     /* Reserved */
        unsigned long   shrink_buf_reservd;     /* Reserved */

        unsigned char   shrink_buf_result;      /* Reason for call failing
                                                   Zero is Good return */
        unsigned char   shrink_buf_init;        /* Non-Zero if it caused an
                                                   xxinit call. */

        unsigned char   shrink_buf_anports;     /* Number of async ports  */
        unsigned char   shrink_buf_snports;     /* Number of sync  ports */
        unsigned char   shrink_buf_type;        /* Board type 1 = PC/Xi,
                                                              2 = PC/Xm,
                                                              3 = PC/Xe
                                                              4 = MC/Xi
                                                              5 = COMX/i */
        unsigned char   shrink_buf_card;        /* Card number */

};

/************************************************************************
 * Structure to get driver status information
 ************************************************************************/
struct digi_dinfo {
        unsigned long   dinfo_nboards;          /* # boards configured  */
        char            dinfo_reserved[12];     /* for future expansion */
        char            dinfo_version[16];      /* driver version       */
};

#define DIGI_GETDD      (('d'<<8) | 248)                /* get driver info      */

/************************************************************************
 * Structure used with ioctl commands for per-board information
 *
 * physsize and memsize differ when board has "windowed" memory
 ************************************************************************/
struct digi_info {
        unsigned long   info_bdnum;             /* Board number (0 based)  */
        unsigned long   info_ioport;            /* io port address         */
        unsigned long   info_physaddr;          /* memory address          */
        unsigned long   info_physsize;          /* Size of host mem window */
        unsigned long   info_memsize;           /* Amount of dual-port mem */
                                                /* on board                */
        unsigned short  info_bdtype;            /* Board type              */
        unsigned short  info_nports;            /* number of ports         */
        char            info_bdstate;           /* board state             */
        char            info_reserved[7];       /* for future expansion    */
};

#define DIGI_GETBD      (('d'<<8) | 249)                /* get board info          */

struct digi_stat {
        unsigned int    info_chan;              /* Channel number (0 based)  */
        unsigned int    info_brd;               /* Board number (0 based)  */
        unsigned long   info_cflag;             /* cflag for channel       */
        unsigned long   info_iflag;             /* iflag for channel       */
        unsigned long   info_oflag;             /* oflag for channel       */
        unsigned long   info_mstat;             /* mstat for channel       */
        unsigned long   info_tx_data;           /* tx_data for channel       */
        unsigned long   info_rx_data;           /* rx_data for channel       */
        unsigned long   info_hflow;             /* hflow for channel       */
        unsigned long   info_reserved[8];       /* for future expansion    */
};

#define DIGI_GETSTAT    (('d'<<8) | 244)                /* get board info          */
/************************************************************************
 *
 * Structure used with ioctl commands for per-channel information
 *
 ************************************************************************/
struct digi_ch {
        unsigned long   info_bdnum;             /* Board number (0 based)  */
        unsigned long   info_channel;           /* Channel index number    */
        unsigned long   info_ch_cflag;          /* Channel cflag           */
        unsigned long   info_ch_iflag;          /* Channel iflag           */
        unsigned long   info_ch_oflag;          /* Channel oflag           */
        unsigned long   info_chsize;            /* Channel structure size  */
        unsigned long   info_sleep_stat;        /* sleep status            */
        dev_t           info_dev;               /* device number           */
        unsigned char   info_initstate;         /* Channel init state      */
        unsigned char   info_running;           /* Channel running state   */
        long            reserved[8];            /* reserved for future use */
};

/*
* This structure is used with the DIGI_FEPCMD ioctl to
* tell the driver which port to send the command for.
*/
struct digi_cmd {
        int     cmd;
        int     word;
        int     ncmds;
        int     chan; /* channel index (zero based) */
        int     bdid; /* board index (zero based) */
};

/*
*  info_sleep_stat defines
*/
#define INFO_RUNWAIT    0x0001
#define INFO_WOPEN      0x0002
#define INFO_TTIOW      0x0004
#define INFO_CH_RWAIT   0x0008
#define INFO_CH_WEMPTY  0x0010
#define INFO_CH_WLOW    0x0020
#define INFO_XXBUF_BUSY 0x0040

#define DIGI_GETCH      (('d'<<8) | 245)                /* get board info          */

/* Board type definitions */

#define SUBTYPE         0007
#define T_PCXI          0000
#define T_PCXM          0001
#define T_PCXE          0002
#define T_PCXR          0003
#define T_SP            0004
#define T_SP_PLUS       0005
#       define T_HERC   0000
#       define T_HOU    0001
#       define T_LON    0002
#       define T_CHA    0003
#define FAMILY          0070
#define T_COMXI         0000
#define T_PCXX          0010
#define T_CX            0020
#define T_EPC           0030
#define T_PCLITE        0040
#define T_SPXX          0050
#define T_AVXX          0060
#define T_DXB           0070
#define T_A2K_4_8       0070
#define BUSTYPE         0700
#define T_ISABUS        0000
#define T_MCBUS         0100
#define T_EISABUS       0200
#define T_PCIBUS        0400

/* Board State Definitions */

#define BD_RUNNING      0x0
#define BD_REASON       0x7f
#define BD_NOTFOUND     0x1
#define BD_NOIOPORT     0x2
#define BD_NOMEM        0x3
#define BD_NOBIOS       0x4
#define BD_NOFEP        0x5
#define BD_FAILED       0x6
#define BD_ALLOCATED    0x7
#define BD_TRIBOOT      0x8
#define BD_BADKME       0x80

#define DIGI_LOOPBACK         (('d'<<8) | 252)          /* Enable/disable UART internal loopback */
#define DIGI_SPOLL            (('d'<<8) | 254)          /* change poller rate   */

#define DIGI_SETCUSTOMBAUD      _IOW('e', 106, int)     /* Set integer baud rate */
#define DIGI_GETCUSTOMBAUD      _IOR('e', 107, int)     /* Get integer baud rate */
#define DIGI_RESET_PORT         (('e'<<8) | 93)         /* Reset port           */

/************************************************************************
 * Channel information structure.
 ************************************************************************/
struct channel_t {
        int magic;                      /* Channel Magic Number         */
        struct bs_t     *ch_bs;         /* Base structure pointer       */
        struct cm_t     *ch_cm;         /* Command queue pointer        */
        struct board_t *ch_bd;          /* Board structure pointer      */
        unsigned char *ch_vaddr;        /* FEP memory origin            */
        unsigned char *ch_taddr;        /* Write buffer origin          */
        unsigned char *ch_raddr;        /* Read buffer origin           */
        struct digi_t  ch_digi;         /* Transparent Print structure  */
        struct un_t ch_tun;             /* Terminal unit info           */
        struct un_t ch_pun;             /* Printer unit info            */

        spinlock_t      ch_lock;        /* provide for serialization */
        wait_queue_head_t ch_flags_wait;

        u32     pscan_state;
        uchar   pscan_savechar;

        u32 ch_portnum;                 /* Port number, 0 offset.       */
        u32 ch_open_count;              /* open count                   */
        u32     ch_flags;               /* Channel flags                */


        u32     ch_close_delay;         /* How long we should drop RTS/DTR for */

        u32     ch_cpstime;             /* Time for CPS calculations    */

        tcflag_t ch_c_iflag;            /* channel iflags               */
        tcflag_t ch_c_cflag;            /* channel cflags               */
        tcflag_t ch_c_oflag;            /* channel oflags               */
        tcflag_t ch_c_lflag;            /* channel lflags               */

        u16  ch_fepiflag;            /* FEP tty iflags               */
        u16  ch_fepcflag;               /* FEP tty cflags               */
        u16  ch_fepoflag;               /* FEP tty oflags               */
        u16  ch_wopen;                  /* Waiting for open process cnt */
        u16  ch_tstart;                 /* Transmit buffer start        */
        u16  ch_tsize;                  /* Transmit buffer size         */
        u16  ch_rstart;                 /* Receive buffer start         */
        u16  ch_rsize;                  /* Receive buffer size          */
        u16  ch_rdelay;                 /* Receive delay time           */

        u16     ch_tlw;                 /* Our currently set low water mark */

        u16  ch_cook;                   /* Output character mask        */

        uchar   ch_card;                /* Card channel is on           */
        uchar   ch_stopc;               /* Stop character               */
        uchar   ch_startc;              /* Start character              */

        uchar   ch_mostat;              /* FEP output modem status      */
        uchar   ch_mistat;              /* FEP input modem status       */
        uchar   ch_mforce;              /* Modem values to be forced    */
        uchar   ch_mval;                /* Force values                 */
        uchar   ch_fepstopc;            /* FEP stop character           */
        uchar   ch_fepstartc;           /* FEP start character          */

        uchar   ch_astopc;              /* Auxiliary Stop character     */
        uchar   ch_astartc;             /* Auxiliary Start character    */
        uchar   ch_fepastopc;           /* Auxiliary FEP stop char      */
        uchar   ch_fepastartc;          /* Auxiliary FEP start char     */

        uchar   ch_hflow;               /* FEP hardware handshake       */
        uchar   ch_dsr;                 /* stores real dsr value        */
        uchar   ch_cd;                  /* stores real cd value         */
        uchar   ch_tx_win;              /* channel tx buffer window     */
        uchar   ch_rx_win;              /* channel rx buffer window     */
        uint    ch_custom_speed;        /* Custom baud, if set          */
        uint    ch_baud_info;           /* Current baud info for /proc output   */
        ulong   ch_rxcount;             /* total of data received so far        */
        ulong   ch_txcount;             /* total of data transmitted so far     */
        ulong   ch_err_parity;          /* Count of parity errors on channel    */
        ulong   ch_err_frame;           /* Count of framing errors on channel   */
        ulong   ch_err_break;           /* Count of breaks on channel   */
        ulong   ch_err_overrun;         /* Count of overruns on channel */

        uint ch_sniff_in;
        uint ch_sniff_out;
        char *ch_sniff_buf;             /* Sniff buffer for proc */
        ulong ch_sniff_flags;           /* Channel flags                */
        wait_queue_head_t ch_sniff_wait;
};

/************************************************************************
 * Command structure definition.
 ************************************************************************/
struct cm_t {
        volatile unsigned short cm_head;        /* Command buffer head offset   */
        volatile unsigned short cm_tail;        /* Command buffer tail offset   */
        volatile unsigned short cm_start;       /* start offset of buffer       */
        volatile unsigned short cm_max;         /* last offset of buffer        */
};

/************************************************************************
 * Event structure definition.
 ************************************************************************/
struct ev_t {
        volatile unsigned short ev_head;        /* Command buffer head offset   */
        volatile unsigned short ev_tail;        /* Command buffer tail offset   */
        volatile unsigned short ev_start;       /* start offset of buffer       */
        volatile unsigned short ev_max;         /* last offset of buffer        */
};

/************************************************************************
 * Download buffer structure.
 ************************************************************************/
struct downld_t {
        uchar   dl_type;                /* Header                       */
        uchar   dl_seq;                 /* Download sequence            */
        ushort  dl_srev;                /* Software revision number     */
        ushort  dl_lrev;                /* Low revision number          */
        ushort  dl_hrev;                /* High revision number         */
        ushort  dl_seg;                 /* Start segment address        */
        ushort  dl_size;                /* Number of bytes to download  */
        uchar   dl_data[1024];          /* Download data                */
};

/************************************************************************
 * Per channel buffer structure
 ************************************************************************
 *              Base Structure Entries Usage Meanings to Host           *
 *                                                                      *
 *        W = read write        R = read only                           *
 *        C = changed by commands only                                  *
 *        U = unknown (may be changed w/o notice)                       *
 ************************************************************************/
struct bs_t {
        volatile unsigned short  tp_jmp;        /* Transmit poll jump            */
        volatile unsigned short  tc_jmp;        /* Cooked procedure jump         */
        volatile unsigned short  ri_jmp;        /* Not currently used            */
        volatile unsigned short  rp_jmp;        /* Receive poll jump             */

        volatile unsigned short  tx_seg;        /* W  Tx segment         */
        volatile unsigned short  tx_head;       /* W  Tx buffer head offset     */
        volatile unsigned short  tx_tail;       /* R  Tx buffer tail offset     */
        volatile unsigned short  tx_max;        /* W  Tx buffer size - 1         */

        volatile unsigned short  rx_seg;        /* W  Rx segment                */
        volatile unsigned short  rx_head;       /* W  Rx buffer head offset     */
        volatile unsigned short  rx_tail;       /* R  Rx buffer tail offset     */
        volatile unsigned short  rx_max;        /* W  Rx buffer size - 1         */

        volatile unsigned short  tx_lw;         /* W  Tx buffer low water mark  */
        volatile unsigned short  rx_lw;         /* W  Rx buffer low water mark  */
        volatile unsigned short  rx_hw;         /* W  Rx buffer high water mark */
        volatile unsigned short  incr;          /* W  Increment to next channel */

        volatile unsigned short  fepdev;        /* U  SCC device base address    */
        volatile unsigned short  edelay;        /* W  Exception delay            */
        volatile unsigned short  blen;          /* W  Break length              */
        volatile unsigned short  btime;         /* U  Break complete time       */

        volatile unsigned short  iflag;         /* C  UNIX input flags          */
        volatile unsigned short  oflag;         /* C  UNIX output flags         */
        volatile unsigned short  cflag;         /* C  UNIX control flags        */
        volatile unsigned short  wfill[13];     /* U  Reserved for expansion    */

        volatile unsigned char   num;           /* U  Channel number            */
        volatile unsigned char   ract;          /* U  Receiver active counter   */
        volatile unsigned char   bstat;         /* U  Break status bits         */
        volatile unsigned char   tbusy;         /* W  Transmit busy             */
        volatile unsigned char   iempty;        /* W  Transmit empty event enable */
        volatile unsigned char   ilow;          /* W  Transmit low-water event enable */
        volatile unsigned char   idata;         /* W  Receive data interrupt enable */
        volatile unsigned char   eflag;         /* U  Host event flags          */

        volatile unsigned char   tflag;         /* U  Transmit flags            */
        volatile unsigned char   rflag;         /* U  Receive flags             */
        volatile unsigned char   xmask;         /* U  Transmit ready flags      */
        volatile unsigned char   xval;          /* U  Transmit ready value      */
        volatile unsigned char   m_stat;        /* RC Modem status bits          */
        volatile unsigned char   m_change;      /* U  Modem bits which changed  */
        volatile unsigned char   m_int;         /* W  Modem interrupt enable bits */
        volatile unsigned char   m_last;        /* U  Last modem status         */

        volatile unsigned char   mtran;         /* C   Unreported modem trans   */
        volatile unsigned char   orun;          /* C   Buffer overrun occurred  */
        volatile unsigned char   astartc;       /* W   Auxiliary Xon char       */
        volatile unsigned char   astopc;        /* W   Auxiliary Xoff char      */
        volatile unsigned char   startc;        /* W   Xon character             */
        volatile unsigned char   stopc;         /* W   Xoff character           */
        volatile unsigned char   vnextc;        /* W   Vnext character           */
        volatile unsigned char   hflow;         /* C   Software flow control    */
        
        volatile unsigned char   fillc;         /* U   Delay Fill character     */
        volatile unsigned char   ochar;         /* U   Saved output character   */
        volatile unsigned char   omask;         /* U   Output character mask    */

        volatile unsigned char   bfill[13];     /* U   Reserved for expansion   */

        volatile unsigned char   scc[16];       /* U   SCC registers            */
};

struct cnode {
        struct cnode *next;
        int type;
        int numbrd;

        union {
                struct {
                        char  type;     /* Board Type           */
                        long  port;     /* I/O Address          */
                        char  *portstr; /* I/O Address in string */
                        long  addr;     /* Memory Address       */
                        char  *addrstr; /* Memory Address in string */
                        long  pcibus;   /* PCI BUS              */
                        char  *pcibusstr; /* PCI BUS in string */
                        long  pcislot;  /* PCI SLOT             */
                        char  *pcislotstr; /* PCI SLOT in string */
                        long  nport;    /* Number of Ports      */
                        char  *id;      /* tty id               */
                        long  start;    /* start of tty counting */
                        char  *method;  /* Install method       */
                        char  v_type;
                        char  v_port;
                        char  v_addr;
                        char  v_pcibus;
                        char  v_pcislot;
                        char  v_nport;
                        char  v_id;
                        char  v_start;
                        char  v_method;
                        char  line1;
                        char  line2;
                        char  conc1;   /* total concs in line1 */
                        char  conc2;   /* total concs in line2 */
                        char  module1; /* total modules for line1 */
                        char  module2; /* total modules for line2 */
                        char  *status; /* config status */
                        char  *dimstatus;        /* Y/N */
                        int   status_index; /* field pointer */
                } board;

                struct {
                        char  *cable;
                        char  v_cable;
                        long  speed;
                        char  v_speed;
                } line;

                struct {
                        char  type;
                        char  *connect;
                        long  speed;
                        long  nport;
                        char  *id;
                        char  *idstr;
                        long  start;
                        char  v_type;
                        char  v_connect;
                        char  v_speed;
                        char  v_nport;
                        char  v_id;
                        char  v_start;
                } conc;

                struct {
                        char type;
                        long nport;
                        char *id;
                        char *idstr;
                        long start;
                        char v_type;
                        char v_nport;
                        char v_id;
                        char v_start;
                } module;

                char *ttyname;

                char *cuname;

                char *printname;

                long majornumber;

                long altpin;

                long ttysize;

                long chsize;

                long bssize;

                long unsize;

                long f2size;

                long vpixsize;

                long useintr;
        } u;
};

#endif