powerpc: Add PPC_EMULATED_STATS to powernv_defconfig
[linux-2.6/btrfs-unstable.git] / drivers / edac / amd64_edac.h
blob1d4b74e9a037f70bd68bd8e8c615976691c52f9c
1 /*
2 * AMD64 class Memory Controller kernel module
4 * Copyright (c) 2009 SoftwareBitMaker.
5 * Copyright (c) 2009-15 Advanced Micro Devices, Inc.
7 * This file may be distributed under the terms of the
8 * GNU General Public License.
9 */
11 #include <linux/module.h>
12 #include <linux/ctype.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/slab.h>
17 #include <linux/mmzone.h>
18 #include <linux/edac.h>
19 #include <asm/cpu_device_id.h>
20 #include <asm/msr.h>
21 #include "edac_module.h"
22 #include "mce_amd.h"
24 #define amd64_info(fmt, arg...) \
25 edac_printk(KERN_INFO, "amd64", fmt, ##arg)
27 #define amd64_warn(fmt, arg...) \
28 edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg)
30 #define amd64_err(fmt, arg...) \
31 edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg)
33 #define amd64_mc_warn(mci, fmt, arg...) \
34 edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
36 #define amd64_mc_err(mci, fmt, arg...) \
37 edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
40 * Throughout the comments in this code, the following terms are used:
42 * SysAddr, DramAddr, and InputAddr
44 * These terms come directly from the amd64 documentation
45 * (AMD publication #26094). They are defined as follows:
47 * SysAddr:
48 * This is a physical address generated by a CPU core or a device
49 * doing DMA. If generated by a CPU core, a SysAddr is the result of
50 * a virtual to physical address translation by the CPU core's address
51 * translation mechanism (MMU).
53 * DramAddr:
54 * A DramAddr is derived from a SysAddr by subtracting an offset that
55 * depends on which node the SysAddr maps to and whether the SysAddr
56 * is within a range affected by memory hoisting. The DRAM Base
57 * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
58 * determine which node a SysAddr maps to.
60 * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
61 * is within the range of addresses specified by this register, then
62 * a value x from the DHAR is subtracted from the SysAddr to produce a
63 * DramAddr. Here, x represents the base address for the node that
64 * the SysAddr maps to plus an offset due to memory hoisting. See
65 * section 3.4.8 and the comments in amd64_get_dram_hole_info() and
66 * sys_addr_to_dram_addr() below for more information.
68 * If the SysAddr is not affected by the DHAR then a value y is
69 * subtracted from the SysAddr to produce a DramAddr. Here, y is the
70 * base address for the node that the SysAddr maps to. See section
71 * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
72 * information.
74 * InputAddr:
75 * A DramAddr is translated to an InputAddr before being passed to the
76 * memory controller for the node that the DramAddr is associated
77 * with. The memory controller then maps the InputAddr to a csrow.
78 * If node interleaving is not in use, then the InputAddr has the same
79 * value as the DramAddr. Otherwise, the InputAddr is produced by
80 * discarding the bits used for node interleaving from the DramAddr.
81 * See section 3.4.4 for more information.
83 * The memory controller for a given node uses its DRAM CS Base and
84 * DRAM CS Mask registers to map an InputAddr to a csrow. See
85 * sections 3.5.4 and 3.5.5 for more information.
88 #define EDAC_AMD64_VERSION "3.5.0"
89 #define EDAC_MOD_STR "amd64_edac"
91 /* Extended Model from CPUID, for CPU Revision numbers */
92 #define K8_REV_D 1
93 #define K8_REV_E 2
94 #define K8_REV_F 4
96 /* Hardware limit on ChipSelect rows per MC and processors per system */
97 #define NUM_CHIPSELECTS 8
98 #define DRAM_RANGES 8
100 #define ON true
101 #define OFF false
104 * PCI-defined configuration space registers
106 #define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
107 #define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
108 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
109 #define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
110 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
111 #define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
112 #define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
113 #define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
114 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
115 #define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
116 #define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
117 #define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
120 * Function 1 - Address Map
122 #define DRAM_BASE_LO 0x40
123 #define DRAM_LIMIT_LO 0x44
126 * F15 M30h D18F1x2[1C:00]
128 #define DRAM_CONT_BASE 0x200
129 #define DRAM_CONT_LIMIT 0x204
132 * F15 M30h D18F1x2[4C:40]
134 #define DRAM_CONT_HIGH_OFF 0x240
136 #define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3))
137 #define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
138 #define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7))
140 #define DHAR 0xf0
141 #define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1))
142 #define dhar_base(pvt) ((pvt)->dhar & 0xff000000)
143 #define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16)
145 /* NOTE: Extra mask bit vs K8 */
146 #define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16)
148 #define DCT_CFG_SEL 0x10C
150 #define DRAM_LOCAL_NODE_BASE 0x120
151 #define DRAM_LOCAL_NODE_LIM 0x124
153 #define DRAM_BASE_HI 0x140
154 #define DRAM_LIMIT_HI 0x144
158 * Function 2 - DRAM controller
160 #define DCSB0 0x40
161 #define DCSB1 0x140
162 #define DCSB_CS_ENABLE BIT(0)
164 #define DCSM0 0x60
165 #define DCSM1 0x160
167 #define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
169 #define DRAM_CONTROL 0x78
171 #define DBAM0 0x80
172 #define DBAM1 0x180
174 /* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
175 #define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF)
177 #define DBAM_MAX_VALUE 11
179 #define DCLR0 0x90
180 #define DCLR1 0x190
181 #define REVE_WIDTH_128 BIT(16)
182 #define WIDTH_128 BIT(11)
184 #define DCHR0 0x94
185 #define DCHR1 0x194
186 #define DDR3_MODE BIT(8)
188 #define DCT_SEL_LO 0x110
189 #define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0))
190 #define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2))
192 #define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
194 #define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5))
195 #define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10))
197 #define SWAP_INTLV_REG 0x10c
199 #define DCT_SEL_HI 0x114
201 #define F15H_M60H_SCRCTRL 0x1C8
202 #define F17H_SCR_BASE_ADDR 0x48
203 #define F17H_SCR_LIMIT_ADDR 0x4C
206 * Function 3 - Misc Control
208 #define NBCTL 0x40
210 #define NBCFG 0x44
211 #define NBCFG_CHIPKILL BIT(23)
212 #define NBCFG_ECC_ENABLE BIT(22)
214 /* F3x48: NBSL */
215 #define F10_NBSL_EXT_ERR_ECC 0x8
216 #define NBSL_PP_OBS 0x2
218 #define SCRCTRL 0x58
220 #define F10_ONLINE_SPARE 0xB0
221 #define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
222 #define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
224 #define F10_NB_ARRAY_ADDR 0xB8
225 #define F10_NB_ARRAY_DRAM BIT(31)
227 /* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
228 #define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1)
230 #define F10_NB_ARRAY_DATA 0xBC
231 #define F10_NB_ARR_ECC_WR_REQ BIT(17)
232 #define SET_NB_DRAM_INJECTION_WRITE(inj) \
233 (BIT(((inj.word) & 0xF) + 20) | \
234 F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
235 #define SET_NB_DRAM_INJECTION_READ(inj) \
236 (BIT(((inj.word) & 0xF) + 20) | \
237 BIT(16) | inj.bit_map)
240 #define NBCAP 0xE8
241 #define NBCAP_CHIPKILL BIT(4)
242 #define NBCAP_SECDED BIT(3)
243 #define NBCAP_DCT_DUAL BIT(0)
245 #define EXT_NB_MCA_CFG 0x180
247 /* MSRs */
248 #define MSR_MCGCTL_NBE BIT(4)
250 /* F17h */
252 /* F0: */
253 #define DF_DHAR 0x104
255 /* UMC CH register offsets */
256 #define UMCCH_BASE_ADDR 0x0
257 #define UMCCH_ADDR_MASK 0x20
258 #define UMCCH_ADDR_CFG 0x30
259 #define UMCCH_DIMM_CFG 0x80
260 #define UMCCH_UMC_CFG 0x100
261 #define UMCCH_SDP_CTRL 0x104
262 #define UMCCH_ECC_CTRL 0x14C
263 #define UMCCH_ECC_BAD_SYMBOL 0xD90
264 #define UMCCH_UMC_CAP 0xDF0
265 #define UMCCH_UMC_CAP_HI 0xDF4
267 /* UMC CH bitfields */
268 #define UMC_ECC_CHIPKILL_CAP BIT(31)
269 #define UMC_ECC_ENABLED BIT(30)
271 #define UMC_SDP_INIT BIT(31)
273 #define NUM_UMCS 2
275 enum amd_families {
276 K8_CPUS = 0,
277 F10_CPUS,
278 F15_CPUS,
279 F15_M30H_CPUS,
280 F15_M60H_CPUS,
281 F16_CPUS,
282 F16_M30H_CPUS,
283 F17_CPUS,
284 NUM_FAMILIES,
287 /* Error injection control structure */
288 struct error_injection {
289 u32 section;
290 u32 word;
291 u32 bit_map;
294 /* low and high part of PCI config space regs */
295 struct reg_pair {
296 u32 lo, hi;
300 * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
302 struct dram_range {
303 struct reg_pair base;
304 struct reg_pair lim;
307 /* A DCT chip selects collection */
308 struct chip_select {
309 u32 csbases[NUM_CHIPSELECTS];
310 u8 b_cnt;
312 u32 csmasks[NUM_CHIPSELECTS];
313 u8 m_cnt;
316 struct amd64_umc {
317 u32 dimm_cfg; /* DIMM Configuration reg */
318 u32 umc_cfg; /* Configuration reg */
319 u32 sdp_ctrl; /* SDP Control reg */
320 u32 ecc_ctrl; /* DRAM ECC Control reg */
321 u32 umc_cap_hi; /* Capabilities High reg */
324 struct amd64_pvt {
325 struct low_ops *ops;
327 /* pci_device handles which we utilize */
328 struct pci_dev *F0, *F1, *F2, *F3, *F6;
330 u16 mc_node_id; /* MC index of this MC node */
331 u8 fam; /* CPU family */
332 u8 model; /* ... model */
333 u8 stepping; /* ... stepping */
335 int ext_model; /* extended model value of this node */
336 int channel_count;
338 /* Raw registers */
339 u32 dclr0; /* DRAM Configuration Low DCT0 reg */
340 u32 dclr1; /* DRAM Configuration Low DCT1 reg */
341 u32 dchr0; /* DRAM Configuration High DCT0 reg */
342 u32 dchr1; /* DRAM Configuration High DCT1 reg */
343 u32 nbcap; /* North Bridge Capabilities */
344 u32 nbcfg; /* F10 North Bridge Configuration */
345 u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */
346 u32 dhar; /* DRAM Hoist reg */
347 u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */
348 u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
350 /* one for each DCT */
351 struct chip_select csels[2];
353 /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
354 struct dram_range ranges[DRAM_RANGES];
356 u64 top_mem; /* top of memory below 4GB */
357 u64 top_mem2; /* top of memory above 4GB */
359 u32 dct_sel_lo; /* DRAM Controller Select Low */
360 u32 dct_sel_hi; /* DRAM Controller Select High */
361 u32 online_spare; /* On-Line spare Reg */
363 /* x4 or x8 syndromes in use */
364 u8 ecc_sym_sz;
366 /* place to store error injection parameters prior to issue */
367 struct error_injection injection;
369 /* cache the dram_type */
370 enum mem_type dram_type;
372 struct amd64_umc *umc; /* UMC registers */
375 enum err_codes {
376 DECODE_OK = 0,
377 ERR_NODE = -1,
378 ERR_CSROW = -2,
379 ERR_CHANNEL = -3,
380 ERR_SYND = -4,
381 ERR_NORM_ADDR = -5,
384 struct err_info {
385 int err_code;
386 struct mem_ctl_info *src_mci;
387 int csrow;
388 int channel;
389 u16 syndrome;
390 u32 page;
391 u32 offset;
394 static inline u32 get_umc_base(u8 channel)
396 /* ch0: 0x50000, ch1: 0x150000 */
397 return 0x50000 + (!!channel << 20);
400 static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
402 u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
404 if (boot_cpu_data.x86 == 0xf)
405 return addr;
407 return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
410 static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
412 u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
414 if (boot_cpu_data.x86 == 0xf)
415 return lim;
417 return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
420 static inline u16 extract_syndrome(u64 status)
422 return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
425 static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
427 if (pvt->fam == 0x15 && pvt->model >= 0x30)
428 return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
429 ((pvt->dct_sel_lo >> 6) & 0x3);
431 return ((pvt)->dct_sel_lo >> 6) & 0x3;
434 * per-node ECC settings descriptor
436 struct ecc_settings {
437 u32 old_nbctl;
438 bool nbctl_valid;
440 struct flags {
441 unsigned long nb_mce_enable:1;
442 unsigned long nb_ecc_prev:1;
443 } flags;
446 #ifdef CONFIG_EDAC_DEBUG
447 extern const struct attribute_group amd64_edac_dbg_group;
448 #endif
450 #ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
451 extern const struct attribute_group amd64_edac_inj_group;
452 #endif
455 * Each of the PCI Device IDs types have their own set of hardware accessor
456 * functions and per device encoding/decoding logic.
458 struct low_ops {
459 int (*early_channel_count) (struct amd64_pvt *pvt);
460 void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
461 struct err_info *);
462 int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
463 unsigned cs_mode, int cs_mask_nr);
466 struct amd64_family_type {
467 const char *ctl_name;
468 u16 f0_id, f1_id, f2_id, f6_id;
469 struct low_ops ops;
472 int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
473 u32 *val, const char *func);
474 int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
475 u32 val, const char *func);
477 #define amd64_read_pci_cfg(pdev, offset, val) \
478 __amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
480 #define amd64_write_pci_cfg(pdev, offset, val) \
481 __amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
483 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
484 u64 *hole_offset, u64 *hole_size);
486 #define to_mci(k) container_of(k, struct mem_ctl_info, dev)
488 /* Injection helpers */
489 static inline void disable_caches(void *dummy)
491 write_cr0(read_cr0() | X86_CR0_CD);
492 wbinvd();
495 static inline void enable_caches(void *dummy)
497 write_cr0(read_cr0() & ~X86_CR0_CD);
500 static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
502 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
503 u32 tmp;
504 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
505 return (u8) tmp & 0xF;
507 return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
510 static inline u8 dhar_valid(struct amd64_pvt *pvt)
512 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
513 u32 tmp;
514 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
515 return (tmp >> 1) & BIT(0);
517 return (pvt)->dhar & BIT(0);
520 static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
522 if (pvt->fam == 0x15 && pvt->model >= 0x30) {
523 u32 tmp;
524 amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
525 return (tmp >> 11) & 0x1FFF;
527 return (pvt)->dct_sel_lo & 0xFFFFF800;