include/linux/phy/omap_control_phy.h

   1 /*
   2  * omap_control_phy.h - Header file for the PHY part of control module.
   3  *
   4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  */
  18
  19 #ifndef __OMAP_CONTROL_PHY_H__
  20 #define __OMAP_CONTROL_PHY_H__
  21
  22 enum omap_control_phy_type {
  23         OMAP_CTRL_TYPE_OTGHS = 1,       /* Mailbox OTGHS_CONTROL */
  24         OMAP_CTRL_TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
  25         OMAP_CTRL_TYPE_PIPE3,   /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
  26         OMAP_CTRL_TYPE_PCIE,    /* RX TX control of ACSPCIE */
  27         OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
  28         OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
  29 };
  30
  31 struct omap_control_phy {
  32         struct device *dev;
  33
  34         u32 __iomem *otghs_control;
  35         u32 __iomem *power;
  36         u32 __iomem *power_aux;
  37         u32 __iomem *pcie_pcs;
  38
  39         struct clk *sys_clk;
  40
  41         enum omap_control_phy_type type;
  42 };
  43
  44 enum omap_control_usb_mode {
  45         USB_MODE_UNDEFINED = 0,
  46         USB_MODE_HOST,
  47         USB_MODE_DEVICE,
  48         USB_MODE_DISCONNECT,
  49 };
  50
  51 #define OMAP_CTRL_DEV_PHY_PD            BIT(0)
  52
  53 #define OMAP_CTRL_DEV_AVALID            BIT(0)
  54 #define OMAP_CTRL_DEV_BVALID            BIT(1)
  55 #define OMAP_CTRL_DEV_VBUSVALID         BIT(2)
  56 #define OMAP_CTRL_DEV_SESSEND           BIT(3)
  57 #define OMAP_CTRL_DEV_IDDIG             BIT(4)
  58
  59 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK         0x003FC000
  60 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT        0xE
  61
  62 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK        0xFFC00000
  63 #define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT       0x16
  64
  65 #define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON       0x3
  66 #define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF      0x0
  67
  68 #define OMAP_CTRL_PCIE_PCS_MASK                 0xff
  69 #define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT    0x8
  70
  71 #define OMAP_CTRL_USB2_PHY_PD           BIT(28)
  72
  73 #define AM437X_CTRL_USB2_PHY_PD         BIT(0)
  74 #define AM437X_CTRL_USB2_OTG_PD         BIT(1)
  75 #define AM437X_CTRL_USB2_OTGVDET_EN     BIT(19)
  76 #define AM437X_CTRL_USB2_OTGSESSEND_EN  BIT(20)
  77
  78 #if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
  79 void omap_control_phy_power(struct device *dev, int on);
  80 void omap_control_usb_set_mode(struct device *dev,
  81                                enum omap_control_usb_mode mode);
  82 void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay);
  83 #else
  84
  85 static inline void omap_control_phy_power(struct device *dev, int on)
  86 {
  87 }
  88
  89 static inline void omap_control_usb_set_mode(struct device *dev,
  90         enum omap_control_usb_mode mode)
  91 {
  92 }
  93
  94 static inline void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
  95 {
  96 }
  97 #endif
  98
  99 #endif  /* __OMAP_CONTROL_PHY_H__ */