Merge 4.18-rc7 into staging-next
[linux-2.6/btrfs-unstable.git] / drivers / dma / pl330.c
blobde0957fe966821beb79ee1b75470a8834509ef44
1 /*
2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6 * Jaswinder Singh <jassi.brar@samsung.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/scatterlist.h>
26 #include <linux/of.h>
27 #include <linux/of_dma.h>
28 #include <linux/err.h>
29 #include <linux/pm_runtime.h>
30 #include <linux/bug.h>
32 #include "dmaengine.h"
33 #define PL330_MAX_CHAN 8
34 #define PL330_MAX_IRQS 32
35 #define PL330_MAX_PERI 32
36 #define PL330_MAX_BURST 16
38 #define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
40 enum pl330_cachectrl {
41 CCTRL0, /* Noncacheable and nonbufferable */
42 CCTRL1, /* Bufferable only */
43 CCTRL2, /* Cacheable, but do not allocate */
44 CCTRL3, /* Cacheable and bufferable, but do not allocate */
45 INVALID1, /* AWCACHE = 0x1000 */
46 INVALID2,
47 CCTRL6, /* Cacheable write-through, allocate on writes only */
48 CCTRL7, /* Cacheable write-back, allocate on writes only */
51 enum pl330_byteswap {
52 SWAP_NO,
53 SWAP_2,
54 SWAP_4,
55 SWAP_8,
56 SWAP_16,
59 /* Register and Bit field Definitions */
60 #define DS 0x0
61 #define DS_ST_STOP 0x0
62 #define DS_ST_EXEC 0x1
63 #define DS_ST_CMISS 0x2
64 #define DS_ST_UPDTPC 0x3
65 #define DS_ST_WFE 0x4
66 #define DS_ST_ATBRR 0x5
67 #define DS_ST_QBUSY 0x6
68 #define DS_ST_WFP 0x7
69 #define DS_ST_KILL 0x8
70 #define DS_ST_CMPLT 0x9
71 #define DS_ST_FLTCMP 0xe
72 #define DS_ST_FAULT 0xf
74 #define DPC 0x4
75 #define INTEN 0x20
76 #define ES 0x24
77 #define INTSTATUS 0x28
78 #define INTCLR 0x2c
79 #define FSM 0x30
80 #define FSC 0x34
81 #define FTM 0x38
83 #define _FTC 0x40
84 #define FTC(n) (_FTC + (n)*0x4)
86 #define _CS 0x100
87 #define CS(n) (_CS + (n)*0x8)
88 #define CS_CNS (1 << 21)
90 #define _CPC 0x104
91 #define CPC(n) (_CPC + (n)*0x8)
93 #define _SA 0x400
94 #define SA(n) (_SA + (n)*0x20)
96 #define _DA 0x404
97 #define DA(n) (_DA + (n)*0x20)
99 #define _CC 0x408
100 #define CC(n) (_CC + (n)*0x20)
102 #define CC_SRCINC (1 << 0)
103 #define CC_DSTINC (1 << 14)
104 #define CC_SRCPRI (1 << 8)
105 #define CC_DSTPRI (1 << 22)
106 #define CC_SRCNS (1 << 9)
107 #define CC_DSTNS (1 << 23)
108 #define CC_SRCIA (1 << 10)
109 #define CC_DSTIA (1 << 24)
110 #define CC_SRCBRSTLEN_SHFT 4
111 #define CC_DSTBRSTLEN_SHFT 18
112 #define CC_SRCBRSTSIZE_SHFT 1
113 #define CC_DSTBRSTSIZE_SHFT 15
114 #define CC_SRCCCTRL_SHFT 11
115 #define CC_SRCCCTRL_MASK 0x7
116 #define CC_DSTCCTRL_SHFT 25
117 #define CC_DRCCCTRL_MASK 0x7
118 #define CC_SWAP_SHFT 28
120 #define _LC0 0x40c
121 #define LC0(n) (_LC0 + (n)*0x20)
123 #define _LC1 0x410
124 #define LC1(n) (_LC1 + (n)*0x20)
126 #define DBGSTATUS 0xd00
127 #define DBG_BUSY (1 << 0)
129 #define DBGCMD 0xd04
130 #define DBGINST0 0xd08
131 #define DBGINST1 0xd0c
133 #define CR0 0xe00
134 #define CR1 0xe04
135 #define CR2 0xe08
136 #define CR3 0xe0c
137 #define CR4 0xe10
138 #define CRD 0xe14
140 #define PERIPH_ID 0xfe0
141 #define PERIPH_REV_SHIFT 20
142 #define PERIPH_REV_MASK 0xf
143 #define PERIPH_REV_R0P0 0
144 #define PERIPH_REV_R1P0 1
145 #define PERIPH_REV_R1P1 2
147 #define CR0_PERIPH_REQ_SET (1 << 0)
148 #define CR0_BOOT_EN_SET (1 << 1)
149 #define CR0_BOOT_MAN_NS (1 << 2)
150 #define CR0_NUM_CHANS_SHIFT 4
151 #define CR0_NUM_CHANS_MASK 0x7
152 #define CR0_NUM_PERIPH_SHIFT 12
153 #define CR0_NUM_PERIPH_MASK 0x1f
154 #define CR0_NUM_EVENTS_SHIFT 17
155 #define CR0_NUM_EVENTS_MASK 0x1f
157 #define CR1_ICACHE_LEN_SHIFT 0
158 #define CR1_ICACHE_LEN_MASK 0x7
159 #define CR1_NUM_ICACHELINES_SHIFT 4
160 #define CR1_NUM_ICACHELINES_MASK 0xf
162 #define CRD_DATA_WIDTH_SHIFT 0
163 #define CRD_DATA_WIDTH_MASK 0x7
164 #define CRD_WR_CAP_SHIFT 4
165 #define CRD_WR_CAP_MASK 0x7
166 #define CRD_WR_Q_DEP_SHIFT 8
167 #define CRD_WR_Q_DEP_MASK 0xf
168 #define CRD_RD_CAP_SHIFT 12
169 #define CRD_RD_CAP_MASK 0x7
170 #define CRD_RD_Q_DEP_SHIFT 16
171 #define CRD_RD_Q_DEP_MASK 0xf
172 #define CRD_DATA_BUFF_SHIFT 20
173 #define CRD_DATA_BUFF_MASK 0x3ff
175 #define PART 0x330
176 #define DESIGNER 0x41
177 #define REVISION 0x0
178 #define INTEG_CFG 0x0
179 #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
181 #define PL330_STATE_STOPPED (1 << 0)
182 #define PL330_STATE_EXECUTING (1 << 1)
183 #define PL330_STATE_WFE (1 << 2)
184 #define PL330_STATE_FAULTING (1 << 3)
185 #define PL330_STATE_COMPLETING (1 << 4)
186 #define PL330_STATE_WFP (1 << 5)
187 #define PL330_STATE_KILLING (1 << 6)
188 #define PL330_STATE_FAULT_COMPLETING (1 << 7)
189 #define PL330_STATE_CACHEMISS (1 << 8)
190 #define PL330_STATE_UPDTPC (1 << 9)
191 #define PL330_STATE_ATBARRIER (1 << 10)
192 #define PL330_STATE_QUEUEBUSY (1 << 11)
193 #define PL330_STATE_INVALID (1 << 15)
195 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
196 | PL330_STATE_WFE | PL330_STATE_FAULTING)
198 #define CMD_DMAADDH 0x54
199 #define CMD_DMAEND 0x00
200 #define CMD_DMAFLUSHP 0x35
201 #define CMD_DMAGO 0xa0
202 #define CMD_DMALD 0x04
203 #define CMD_DMALDP 0x25
204 #define CMD_DMALP 0x20
205 #define CMD_DMALPEND 0x28
206 #define CMD_DMAKILL 0x01
207 #define CMD_DMAMOV 0xbc
208 #define CMD_DMANOP 0x18
209 #define CMD_DMARMB 0x12
210 #define CMD_DMASEV 0x34
211 #define CMD_DMAST 0x08
212 #define CMD_DMASTP 0x29
213 #define CMD_DMASTZ 0x0c
214 #define CMD_DMAWFE 0x36
215 #define CMD_DMAWFP 0x30
216 #define CMD_DMAWMB 0x13
218 #define SZ_DMAADDH 3
219 #define SZ_DMAEND 1
220 #define SZ_DMAFLUSHP 2
221 #define SZ_DMALD 1
222 #define SZ_DMALDP 2
223 #define SZ_DMALP 2
224 #define SZ_DMALPEND 2
225 #define SZ_DMAKILL 1
226 #define SZ_DMAMOV 6
227 #define SZ_DMANOP 1
228 #define SZ_DMARMB 1
229 #define SZ_DMASEV 2
230 #define SZ_DMAST 1
231 #define SZ_DMASTP 2
232 #define SZ_DMASTZ 1
233 #define SZ_DMAWFE 2
234 #define SZ_DMAWFP 2
235 #define SZ_DMAWMB 1
236 #define SZ_DMAGO 6
238 #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
239 #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
241 #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
242 #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
245 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
246 * at 1byte/burst for P<->M and M<->M respectively.
247 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
248 * should be enough for P<->M and M<->M respectively.
250 #define MCODE_BUFF_PER_REQ 256
252 /* Use this _only_ to wait on transient states */
253 #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
255 #ifdef PL330_DEBUG_MCGEN
256 static unsigned cmd_line;
257 #define PL330_DBGCMD_DUMP(off, x...) do { \
258 printk("%x:", cmd_line); \
259 printk(x); \
260 cmd_line += off; \
261 } while (0)
262 #define PL330_DBGMC_START(addr) (cmd_line = addr)
263 #else
264 #define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
265 #define PL330_DBGMC_START(addr) do {} while (0)
266 #endif
268 /* The number of default descriptors */
270 #define NR_DEFAULT_DESC 16
272 /* Delay for runtime PM autosuspend, ms */
273 #define PL330_AUTOSUSPEND_DELAY 20
275 /* Populated by the PL330 core driver for DMA API driver's info */
276 struct pl330_config {
277 u32 periph_id;
278 #define DMAC_MODE_NS (1 << 0)
279 unsigned int mode;
280 unsigned int data_bus_width:10; /* In number of bits */
281 unsigned int data_buf_dep:11;
282 unsigned int num_chan:4;
283 unsigned int num_peri:6;
284 u32 peri_ns;
285 unsigned int num_events:6;
286 u32 irq_ns;
290 * Request Configuration.
291 * The PL330 core does not modify this and uses the last
292 * working configuration if the request doesn't provide any.
294 * The Client may want to provide this info only for the
295 * first request and a request with new settings.
297 struct pl330_reqcfg {
298 /* Address Incrementing */
299 unsigned dst_inc:1;
300 unsigned src_inc:1;
303 * For now, the SRC & DST protection levels
304 * and burst size/length are assumed same.
306 bool nonsecure;
307 bool privileged;
308 bool insnaccess;
309 unsigned brst_len:5;
310 unsigned brst_size:3; /* in power of 2 */
312 enum pl330_cachectrl dcctl;
313 enum pl330_cachectrl scctl;
314 enum pl330_byteswap swap;
315 struct pl330_config *pcfg;
319 * One cycle of DMAC operation.
320 * There may be more than one xfer in a request.
322 struct pl330_xfer {
323 u32 src_addr;
324 u32 dst_addr;
325 /* Size to xfer */
326 u32 bytes;
329 /* The xfer callbacks are made with one of these arguments. */
330 enum pl330_op_err {
331 /* The all xfers in the request were success. */
332 PL330_ERR_NONE,
333 /* If req aborted due to global error. */
334 PL330_ERR_ABORT,
335 /* If req failed due to problem with Channel. */
336 PL330_ERR_FAIL,
339 enum dmamov_dst {
340 SAR = 0,
341 CCR,
342 DAR,
345 enum pl330_dst {
346 SRC = 0,
347 DST,
350 enum pl330_cond {
351 SINGLE,
352 BURST,
353 ALWAYS,
356 struct dma_pl330_desc;
358 struct _pl330_req {
359 u32 mc_bus;
360 void *mc_cpu;
361 struct dma_pl330_desc *desc;
364 /* ToBeDone for tasklet */
365 struct _pl330_tbd {
366 bool reset_dmac;
367 bool reset_mngr;
368 u8 reset_chan;
371 /* A DMAC Thread */
372 struct pl330_thread {
373 u8 id;
374 int ev;
375 /* If the channel is not yet acquired by any client */
376 bool free;
377 /* Parent DMAC */
378 struct pl330_dmac *dmac;
379 /* Only two at a time */
380 struct _pl330_req req[2];
381 /* Index of the last enqueued request */
382 unsigned lstenq;
383 /* Index of the last submitted request or -1 if the DMA is stopped */
384 int req_running;
387 enum pl330_dmac_state {
388 UNINIT,
389 INIT,
390 DYING,
393 enum desc_status {
394 /* In the DMAC pool */
395 FREE,
397 * Allocated to some channel during prep_xxx
398 * Also may be sitting on the work_list.
400 PREP,
402 * Sitting on the work_list and already submitted
403 * to the PL330 core. Not more than two descriptors
404 * of a channel can be BUSY at any time.
406 BUSY,
408 * Sitting on the channel work_list but xfer done
409 * by PL330 core
411 DONE,
414 struct dma_pl330_chan {
415 /* Schedule desc completion */
416 struct tasklet_struct task;
418 /* DMA-Engine Channel */
419 struct dma_chan chan;
421 /* List of submitted descriptors */
422 struct list_head submitted_list;
423 /* List of issued descriptors */
424 struct list_head work_list;
425 /* List of completed descriptors */
426 struct list_head completed_list;
428 /* Pointer to the DMAC that manages this channel,
429 * NULL if the channel is available to be acquired.
430 * As the parent, this DMAC also provides descriptors
431 * to the channel.
433 struct pl330_dmac *dmac;
435 /* To protect channel manipulation */
436 spinlock_t lock;
439 * Hardware channel thread of PL330 DMAC. NULL if the channel is
440 * available.
442 struct pl330_thread *thread;
444 /* For D-to-M and M-to-D channels */
445 int burst_sz; /* the peripheral fifo width */
446 int burst_len; /* the number of burst */
447 phys_addr_t fifo_addr;
448 /* DMA-mapped view of the FIFO; may differ if an IOMMU is present */
449 dma_addr_t fifo_dma;
450 enum dma_data_direction dir;
452 /* for cyclic capability */
453 bool cyclic;
455 /* for runtime pm tracking */
456 bool active;
459 struct pl330_dmac {
460 /* DMA-Engine Device */
461 struct dma_device ddma;
463 /* Holds info about sg limitations */
464 struct device_dma_parameters dma_parms;
466 /* Pool of descriptors available for the DMAC's channels */
467 struct list_head desc_pool;
468 /* To protect desc_pool manipulation */
469 spinlock_t pool_lock;
471 /* Size of MicroCode buffers for each channel. */
472 unsigned mcbufsz;
473 /* ioremap'ed address of PL330 registers. */
474 void __iomem *base;
475 /* Populated by the PL330 core driver during pl330_add */
476 struct pl330_config pcfg;
478 spinlock_t lock;
479 /* Maximum possible events/irqs */
480 int events[32];
481 /* BUS address of MicroCode buffer */
482 dma_addr_t mcode_bus;
483 /* CPU address of MicroCode buffer */
484 void *mcode_cpu;
485 /* List of all Channel threads */
486 struct pl330_thread *channels;
487 /* Pointer to the MANAGER thread */
488 struct pl330_thread *manager;
489 /* To handle bad news in interrupt */
490 struct tasklet_struct tasks;
491 struct _pl330_tbd dmac_tbd;
492 /* State of DMAC operation */
493 enum pl330_dmac_state state;
494 /* Holds list of reqs with due callbacks */
495 struct list_head req_done;
497 /* Peripheral channels connected to this DMAC */
498 unsigned int num_peripherals;
499 struct dma_pl330_chan *peripherals; /* keep at end */
500 int quirks;
503 static struct pl330_of_quirks {
504 char *quirk;
505 int id;
506 } of_quirks[] = {
508 .quirk = "arm,pl330-broken-no-flushp",
509 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
513 struct dma_pl330_desc {
514 /* To attach to a queue as child */
515 struct list_head node;
517 /* Descriptor for the DMA Engine API */
518 struct dma_async_tx_descriptor txd;
520 /* Xfer for PL330 core */
521 struct pl330_xfer px;
523 struct pl330_reqcfg rqcfg;
525 enum desc_status status;
527 int bytes_requested;
528 bool last;
530 /* The channel which currently holds this desc */
531 struct dma_pl330_chan *pchan;
533 enum dma_transfer_direction rqtype;
534 /* Index of peripheral for the xfer. */
535 unsigned peri:5;
536 /* Hook to attach to DMAC's list of reqs with due callback */
537 struct list_head rqd;
540 struct _xfer_spec {
541 u32 ccr;
542 struct dma_pl330_desc *desc;
545 static inline bool _queue_full(struct pl330_thread *thrd)
547 return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
550 static inline bool is_manager(struct pl330_thread *thrd)
552 return thrd->dmac->manager == thrd;
555 /* If manager of the thread is in Non-Secure mode */
556 static inline bool _manager_ns(struct pl330_thread *thrd)
558 return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
561 static inline u32 get_revision(u32 periph_id)
563 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
566 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
568 if (dry_run)
569 return SZ_DMAEND;
571 buf[0] = CMD_DMAEND;
573 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
575 return SZ_DMAEND;
578 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
580 if (dry_run)
581 return SZ_DMAFLUSHP;
583 buf[0] = CMD_DMAFLUSHP;
585 peri &= 0x1f;
586 peri <<= 3;
587 buf[1] = peri;
589 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
591 return SZ_DMAFLUSHP;
594 static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
596 if (dry_run)
597 return SZ_DMALD;
599 buf[0] = CMD_DMALD;
601 if (cond == SINGLE)
602 buf[0] |= (0 << 1) | (1 << 0);
603 else if (cond == BURST)
604 buf[0] |= (1 << 1) | (1 << 0);
606 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
607 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
609 return SZ_DMALD;
612 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
613 enum pl330_cond cond, u8 peri)
615 if (dry_run)
616 return SZ_DMALDP;
618 buf[0] = CMD_DMALDP;
620 if (cond == BURST)
621 buf[0] |= (1 << 1);
623 peri &= 0x1f;
624 peri <<= 3;
625 buf[1] = peri;
627 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
628 cond == SINGLE ? 'S' : 'B', peri >> 3);
630 return SZ_DMALDP;
633 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
634 unsigned loop, u8 cnt)
636 if (dry_run)
637 return SZ_DMALP;
639 buf[0] = CMD_DMALP;
641 if (loop)
642 buf[0] |= (1 << 1);
644 cnt--; /* DMAC increments by 1 internally */
645 buf[1] = cnt;
647 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
649 return SZ_DMALP;
652 struct _arg_LPEND {
653 enum pl330_cond cond;
654 bool forever;
655 unsigned loop;
656 u8 bjump;
659 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
660 const struct _arg_LPEND *arg)
662 enum pl330_cond cond = arg->cond;
663 bool forever = arg->forever;
664 unsigned loop = arg->loop;
665 u8 bjump = arg->bjump;
667 if (dry_run)
668 return SZ_DMALPEND;
670 buf[0] = CMD_DMALPEND;
672 if (loop)
673 buf[0] |= (1 << 2);
675 if (!forever)
676 buf[0] |= (1 << 4);
678 if (cond == SINGLE)
679 buf[0] |= (0 << 1) | (1 << 0);
680 else if (cond == BURST)
681 buf[0] |= (1 << 1) | (1 << 0);
683 buf[1] = bjump;
685 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
686 forever ? "FE" : "END",
687 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
688 loop ? '1' : '0',
689 bjump);
691 return SZ_DMALPEND;
694 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
696 if (dry_run)
697 return SZ_DMAKILL;
699 buf[0] = CMD_DMAKILL;
701 return SZ_DMAKILL;
704 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
705 enum dmamov_dst dst, u32 val)
707 if (dry_run)
708 return SZ_DMAMOV;
710 buf[0] = CMD_DMAMOV;
711 buf[1] = dst;
712 buf[2] = val;
713 buf[3] = val >> 8;
714 buf[4] = val >> 16;
715 buf[5] = val >> 24;
717 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
718 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
720 return SZ_DMAMOV;
723 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
725 if (dry_run)
726 return SZ_DMARMB;
728 buf[0] = CMD_DMARMB;
730 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
732 return SZ_DMARMB;
735 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
737 if (dry_run)
738 return SZ_DMASEV;
740 buf[0] = CMD_DMASEV;
742 ev &= 0x1f;
743 ev <<= 3;
744 buf[1] = ev;
746 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
748 return SZ_DMASEV;
751 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
753 if (dry_run)
754 return SZ_DMAST;
756 buf[0] = CMD_DMAST;
758 if (cond == SINGLE)
759 buf[0] |= (0 << 1) | (1 << 0);
760 else if (cond == BURST)
761 buf[0] |= (1 << 1) | (1 << 0);
763 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
764 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
766 return SZ_DMAST;
769 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
770 enum pl330_cond cond, u8 peri)
772 if (dry_run)
773 return SZ_DMASTP;
775 buf[0] = CMD_DMASTP;
777 if (cond == BURST)
778 buf[0] |= (1 << 1);
780 peri &= 0x1f;
781 peri <<= 3;
782 buf[1] = peri;
784 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
785 cond == SINGLE ? 'S' : 'B', peri >> 3);
787 return SZ_DMASTP;
790 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
791 enum pl330_cond cond, u8 peri)
793 if (dry_run)
794 return SZ_DMAWFP;
796 buf[0] = CMD_DMAWFP;
798 if (cond == SINGLE)
799 buf[0] |= (0 << 1) | (0 << 0);
800 else if (cond == BURST)
801 buf[0] |= (1 << 1) | (0 << 0);
802 else
803 buf[0] |= (0 << 1) | (1 << 0);
805 peri &= 0x1f;
806 peri <<= 3;
807 buf[1] = peri;
809 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
810 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
812 return SZ_DMAWFP;
815 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
817 if (dry_run)
818 return SZ_DMAWMB;
820 buf[0] = CMD_DMAWMB;
822 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
824 return SZ_DMAWMB;
827 struct _arg_GO {
828 u8 chan;
829 u32 addr;
830 unsigned ns;
833 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
834 const struct _arg_GO *arg)
836 u8 chan = arg->chan;
837 u32 addr = arg->addr;
838 unsigned ns = arg->ns;
840 if (dry_run)
841 return SZ_DMAGO;
843 buf[0] = CMD_DMAGO;
844 buf[0] |= (ns << 1);
845 buf[1] = chan & 0x7;
846 buf[2] = addr;
847 buf[3] = addr >> 8;
848 buf[4] = addr >> 16;
849 buf[5] = addr >> 24;
851 return SZ_DMAGO;
854 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
856 /* Returns Time-Out */
857 static bool _until_dmac_idle(struct pl330_thread *thrd)
859 void __iomem *regs = thrd->dmac->base;
860 unsigned long loops = msecs_to_loops(5);
862 do {
863 /* Until Manager is Idle */
864 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
865 break;
867 cpu_relax();
868 } while (--loops);
870 if (!loops)
871 return true;
873 return false;
876 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
877 u8 insn[], bool as_manager)
879 void __iomem *regs = thrd->dmac->base;
880 u32 val;
882 val = (insn[0] << 16) | (insn[1] << 24);
883 if (!as_manager) {
884 val |= (1 << 0);
885 val |= (thrd->id << 8); /* Channel Number */
887 writel(val, regs + DBGINST0);
889 val = le32_to_cpu(*((__le32 *)&insn[2]));
890 writel(val, regs + DBGINST1);
892 /* If timed out due to halted state-machine */
893 if (_until_dmac_idle(thrd)) {
894 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
895 return;
898 /* Get going */
899 writel(0, regs + DBGCMD);
902 static inline u32 _state(struct pl330_thread *thrd)
904 void __iomem *regs = thrd->dmac->base;
905 u32 val;
907 if (is_manager(thrd))
908 val = readl(regs + DS) & 0xf;
909 else
910 val = readl(regs + CS(thrd->id)) & 0xf;
912 switch (val) {
913 case DS_ST_STOP:
914 return PL330_STATE_STOPPED;
915 case DS_ST_EXEC:
916 return PL330_STATE_EXECUTING;
917 case DS_ST_CMISS:
918 return PL330_STATE_CACHEMISS;
919 case DS_ST_UPDTPC:
920 return PL330_STATE_UPDTPC;
921 case DS_ST_WFE:
922 return PL330_STATE_WFE;
923 case DS_ST_FAULT:
924 return PL330_STATE_FAULTING;
925 case DS_ST_ATBRR:
926 if (is_manager(thrd))
927 return PL330_STATE_INVALID;
928 else
929 return PL330_STATE_ATBARRIER;
930 case DS_ST_QBUSY:
931 if (is_manager(thrd))
932 return PL330_STATE_INVALID;
933 else
934 return PL330_STATE_QUEUEBUSY;
935 case DS_ST_WFP:
936 if (is_manager(thrd))
937 return PL330_STATE_INVALID;
938 else
939 return PL330_STATE_WFP;
940 case DS_ST_KILL:
941 if (is_manager(thrd))
942 return PL330_STATE_INVALID;
943 else
944 return PL330_STATE_KILLING;
945 case DS_ST_CMPLT:
946 if (is_manager(thrd))
947 return PL330_STATE_INVALID;
948 else
949 return PL330_STATE_COMPLETING;
950 case DS_ST_FLTCMP:
951 if (is_manager(thrd))
952 return PL330_STATE_INVALID;
953 else
954 return PL330_STATE_FAULT_COMPLETING;
955 default:
956 return PL330_STATE_INVALID;
960 static void _stop(struct pl330_thread *thrd)
962 void __iomem *regs = thrd->dmac->base;
963 u8 insn[6] = {0, 0, 0, 0, 0, 0};
965 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
966 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
968 /* Return if nothing needs to be done */
969 if (_state(thrd) == PL330_STATE_COMPLETING
970 || _state(thrd) == PL330_STATE_KILLING
971 || _state(thrd) == PL330_STATE_STOPPED)
972 return;
974 _emit_KILL(0, insn);
976 /* Stop generating interrupts for SEV */
977 writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
979 _execute_DBGINSN(thrd, insn, is_manager(thrd));
982 /* Start doing req 'idx' of thread 'thrd' */
983 static bool _trigger(struct pl330_thread *thrd)
985 void __iomem *regs = thrd->dmac->base;
986 struct _pl330_req *req;
987 struct dma_pl330_desc *desc;
988 struct _arg_GO go;
989 unsigned ns;
990 u8 insn[6] = {0, 0, 0, 0, 0, 0};
991 int idx;
993 /* Return if already ACTIVE */
994 if (_state(thrd) != PL330_STATE_STOPPED)
995 return true;
997 idx = 1 - thrd->lstenq;
998 if (thrd->req[idx].desc != NULL) {
999 req = &thrd->req[idx];
1000 } else {
1001 idx = thrd->lstenq;
1002 if (thrd->req[idx].desc != NULL)
1003 req = &thrd->req[idx];
1004 else
1005 req = NULL;
1008 /* Return if no request */
1009 if (!req)
1010 return true;
1012 /* Return if req is running */
1013 if (idx == thrd->req_running)
1014 return true;
1016 desc = req->desc;
1018 ns = desc->rqcfg.nonsecure ? 1 : 0;
1020 /* See 'Abort Sources' point-4 at Page 2-25 */
1021 if (_manager_ns(thrd) && !ns)
1022 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1023 __func__, __LINE__);
1025 go.chan = thrd->id;
1026 go.addr = req->mc_bus;
1027 go.ns = ns;
1028 _emit_GO(0, insn, &go);
1030 /* Set to generate interrupts for SEV */
1031 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1033 /* Only manager can execute GO */
1034 _execute_DBGINSN(thrd, insn, true);
1036 thrd->req_running = idx;
1038 return true;
1041 static bool _start(struct pl330_thread *thrd)
1043 switch (_state(thrd)) {
1044 case PL330_STATE_FAULT_COMPLETING:
1045 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1047 if (_state(thrd) == PL330_STATE_KILLING)
1048 UNTIL(thrd, PL330_STATE_STOPPED)
1050 case PL330_STATE_FAULTING:
1051 _stop(thrd);
1053 case PL330_STATE_KILLING:
1054 case PL330_STATE_COMPLETING:
1055 UNTIL(thrd, PL330_STATE_STOPPED)
1057 case PL330_STATE_STOPPED:
1058 return _trigger(thrd);
1060 case PL330_STATE_WFP:
1061 case PL330_STATE_QUEUEBUSY:
1062 case PL330_STATE_ATBARRIER:
1063 case PL330_STATE_UPDTPC:
1064 case PL330_STATE_CACHEMISS:
1065 case PL330_STATE_EXECUTING:
1066 return true;
1068 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1069 default:
1070 return false;
1074 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1075 const struct _xfer_spec *pxs, int cyc)
1077 int off = 0;
1078 struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1080 /* check lock-up free version */
1081 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1082 while (cyc--) {
1083 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1084 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1086 } else {
1087 while (cyc--) {
1088 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1089 off += _emit_RMB(dry_run, &buf[off]);
1090 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1091 off += _emit_WMB(dry_run, &buf[off]);
1095 return off;
1098 static u32 _emit_load(unsigned int dry_run, u8 buf[],
1099 enum pl330_cond cond, enum dma_transfer_direction direction,
1100 u8 peri)
1102 int off = 0;
1104 switch (direction) {
1105 case DMA_MEM_TO_MEM:
1106 /* fall through */
1107 case DMA_MEM_TO_DEV:
1108 off += _emit_LD(dry_run, &buf[off], cond);
1109 break;
1111 case DMA_DEV_TO_MEM:
1112 if (cond == ALWAYS) {
1113 off += _emit_LDP(dry_run, &buf[off], SINGLE,
1114 peri);
1115 off += _emit_LDP(dry_run, &buf[off], BURST,
1116 peri);
1117 } else {
1118 off += _emit_LDP(dry_run, &buf[off], cond,
1119 peri);
1121 break;
1123 default:
1124 /* this code should be unreachable */
1125 WARN_ON(1);
1126 break;
1129 return off;
1132 static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
1133 enum pl330_cond cond, enum dma_transfer_direction direction,
1134 u8 peri)
1136 int off = 0;
1138 switch (direction) {
1139 case DMA_MEM_TO_MEM:
1140 /* fall through */
1141 case DMA_DEV_TO_MEM:
1142 off += _emit_ST(dry_run, &buf[off], cond);
1143 break;
1145 case DMA_MEM_TO_DEV:
1146 if (cond == ALWAYS) {
1147 off += _emit_STP(dry_run, &buf[off], SINGLE,
1148 peri);
1149 off += _emit_STP(dry_run, &buf[off], BURST,
1150 peri);
1151 } else {
1152 off += _emit_STP(dry_run, &buf[off], cond,
1153 peri);
1155 break;
1157 default:
1158 /* this code should be unreachable */
1159 WARN_ON(1);
1160 break;
1163 return off;
1166 static inline int _ldst_peripheral(struct pl330_dmac *pl330,
1167 unsigned dry_run, u8 buf[],
1168 const struct _xfer_spec *pxs, int cyc,
1169 enum pl330_cond cond)
1171 int off = 0;
1173 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1174 cond = BURST;
1177 * do FLUSHP at beginning to clear any stale dma requests before the
1178 * first WFP.
1180 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1181 off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
1182 while (cyc--) {
1183 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1184 off += _emit_load(dry_run, &buf[off], cond, pxs->desc->rqtype,
1185 pxs->desc->peri);
1186 off += _emit_store(dry_run, &buf[off], cond, pxs->desc->rqtype,
1187 pxs->desc->peri);
1190 return off;
1193 static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1194 const struct _xfer_spec *pxs, int cyc)
1196 int off = 0;
1197 enum pl330_cond cond = BRST_LEN(pxs->ccr) > 1 ? BURST : SINGLE;
1199 switch (pxs->desc->rqtype) {
1200 case DMA_MEM_TO_DEV:
1201 /* fall through */
1202 case DMA_DEV_TO_MEM:
1203 off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
1204 cond);
1205 break;
1207 case DMA_MEM_TO_MEM:
1208 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1209 break;
1211 default:
1212 /* this code should be unreachable */
1213 WARN_ON(1);
1214 break;
1217 return off;
1221 * transfer dregs with single transfers to peripheral, or a reduced size burst
1222 * for mem-to-mem.
1224 static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
1225 const struct _xfer_spec *pxs, int transfer_length)
1227 int off = 0;
1228 int dregs_ccr;
1230 if (transfer_length == 0)
1231 return off;
1233 switch (pxs->desc->rqtype) {
1234 case DMA_MEM_TO_DEV:
1235 /* fall through */
1236 case DMA_DEV_TO_MEM:
1237 off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs,
1238 transfer_length, SINGLE);
1239 break;
1241 case DMA_MEM_TO_MEM:
1242 dregs_ccr = pxs->ccr;
1243 dregs_ccr &= ~((0xf << CC_SRCBRSTLEN_SHFT) |
1244 (0xf << CC_DSTBRSTLEN_SHFT));
1245 dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1246 CC_SRCBRSTLEN_SHFT);
1247 dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1248 CC_DSTBRSTLEN_SHFT);
1249 off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
1250 off += _ldst_memtomem(dry_run, &buf[off], pxs, 1);
1251 break;
1253 default:
1254 /* this code should be unreachable */
1255 WARN_ON(1);
1256 break;
1259 return off;
1262 /* Returns bytes consumed and updates bursts */
1263 static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1264 unsigned long *bursts, const struct _xfer_spec *pxs)
1266 int cyc, cycmax, szlp, szlpend, szbrst, off;
1267 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1268 struct _arg_LPEND lpend;
1270 if (*bursts == 1)
1271 return _bursts(pl330, dry_run, buf, pxs, 1);
1273 /* Max iterations possible in DMALP is 256 */
1274 if (*bursts >= 256*256) {
1275 lcnt1 = 256;
1276 lcnt0 = 256;
1277 cyc = *bursts / lcnt1 / lcnt0;
1278 } else if (*bursts > 256) {
1279 lcnt1 = 256;
1280 lcnt0 = *bursts / lcnt1;
1281 cyc = 1;
1282 } else {
1283 lcnt1 = *bursts;
1284 lcnt0 = 0;
1285 cyc = 1;
1288 szlp = _emit_LP(1, buf, 0, 0);
1289 szbrst = _bursts(pl330, 1, buf, pxs, 1);
1291 lpend.cond = ALWAYS;
1292 lpend.forever = false;
1293 lpend.loop = 0;
1294 lpend.bjump = 0;
1295 szlpend = _emit_LPEND(1, buf, &lpend);
1297 if (lcnt0) {
1298 szlp *= 2;
1299 szlpend *= 2;
1303 * Max bursts that we can unroll due to limit on the
1304 * size of backward jump that can be encoded in DMALPEND
1305 * which is 8-bits and hence 255
1307 cycmax = (255 - (szlp + szlpend)) / szbrst;
1309 cyc = (cycmax < cyc) ? cycmax : cyc;
1311 off = 0;
1313 if (lcnt0) {
1314 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1315 ljmp0 = off;
1318 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1319 ljmp1 = off;
1321 off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1323 lpend.cond = ALWAYS;
1324 lpend.forever = false;
1325 lpend.loop = 1;
1326 lpend.bjump = off - ljmp1;
1327 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1329 if (lcnt0) {
1330 lpend.cond = ALWAYS;
1331 lpend.forever = false;
1332 lpend.loop = 0;
1333 lpend.bjump = off - ljmp0;
1334 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1337 *bursts = lcnt1 * cyc;
1338 if (lcnt0)
1339 *bursts *= lcnt0;
1341 return off;
1344 static inline int _setup_loops(struct pl330_dmac *pl330,
1345 unsigned dry_run, u8 buf[],
1346 const struct _xfer_spec *pxs)
1348 struct pl330_xfer *x = &pxs->desc->px;
1349 u32 ccr = pxs->ccr;
1350 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1351 int num_dregs = (x->bytes - BURST_TO_BYTE(bursts, ccr)) /
1352 BRST_SIZE(ccr);
1353 int off = 0;
1355 while (bursts) {
1356 c = bursts;
1357 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1358 bursts -= c;
1360 off += _dregs(pl330, dry_run, &buf[off], pxs, num_dregs);
1362 return off;
1365 static inline int _setup_xfer(struct pl330_dmac *pl330,
1366 unsigned dry_run, u8 buf[],
1367 const struct _xfer_spec *pxs)
1369 struct pl330_xfer *x = &pxs->desc->px;
1370 int off = 0;
1372 /* DMAMOV SAR, x->src_addr */
1373 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1374 /* DMAMOV DAR, x->dst_addr */
1375 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1377 /* Setup Loop(s) */
1378 off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1380 return off;
1384 * A req is a sequence of one or more xfer units.
1385 * Returns the number of bytes taken to setup the MC for the req.
1387 static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1388 struct pl330_thread *thrd, unsigned index,
1389 struct _xfer_spec *pxs)
1391 struct _pl330_req *req = &thrd->req[index];
1392 u8 *buf = req->mc_cpu;
1393 int off = 0;
1395 PL330_DBGMC_START(req->mc_bus);
1397 /* DMAMOV CCR, ccr */
1398 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1400 off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1402 /* DMASEV peripheral/event */
1403 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1404 /* DMAEND */
1405 off += _emit_END(dry_run, &buf[off]);
1407 return off;
1410 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1412 u32 ccr = 0;
1414 if (rqc->src_inc)
1415 ccr |= CC_SRCINC;
1417 if (rqc->dst_inc)
1418 ccr |= CC_DSTINC;
1420 /* We set same protection levels for Src and DST for now */
1421 if (rqc->privileged)
1422 ccr |= CC_SRCPRI | CC_DSTPRI;
1423 if (rqc->nonsecure)
1424 ccr |= CC_SRCNS | CC_DSTNS;
1425 if (rqc->insnaccess)
1426 ccr |= CC_SRCIA | CC_DSTIA;
1428 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1429 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1431 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1432 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1434 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1435 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1437 ccr |= (rqc->swap << CC_SWAP_SHFT);
1439 return ccr;
1443 * Submit a list of xfers after which the client wants notification.
1444 * Client is not notified after each xfer unit, just once after all
1445 * xfer units are done or some error occurs.
1447 static int pl330_submit_req(struct pl330_thread *thrd,
1448 struct dma_pl330_desc *desc)
1450 struct pl330_dmac *pl330 = thrd->dmac;
1451 struct _xfer_spec xs;
1452 unsigned long flags;
1453 unsigned idx;
1454 u32 ccr;
1455 int ret = 0;
1457 switch (desc->rqtype) {
1458 case DMA_MEM_TO_DEV:
1459 break;
1461 case DMA_DEV_TO_MEM:
1462 break;
1464 case DMA_MEM_TO_MEM:
1465 break;
1467 default:
1468 return -ENOTSUPP;
1471 if (pl330->state == DYING
1472 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1473 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1474 __func__, __LINE__);
1475 return -EAGAIN;
1478 /* If request for non-existing peripheral */
1479 if (desc->rqtype != DMA_MEM_TO_MEM &&
1480 desc->peri >= pl330->pcfg.num_peri) {
1481 dev_info(thrd->dmac->ddma.dev,
1482 "%s:%d Invalid peripheral(%u)!\n",
1483 __func__, __LINE__, desc->peri);
1484 return -EINVAL;
1487 spin_lock_irqsave(&pl330->lock, flags);
1489 if (_queue_full(thrd)) {
1490 ret = -EAGAIN;
1491 goto xfer_exit;
1494 /* Prefer Secure Channel */
1495 if (!_manager_ns(thrd))
1496 desc->rqcfg.nonsecure = 0;
1497 else
1498 desc->rqcfg.nonsecure = 1;
1500 ccr = _prepare_ccr(&desc->rqcfg);
1502 idx = thrd->req[0].desc == NULL ? 0 : 1;
1504 xs.ccr = ccr;
1505 xs.desc = desc;
1507 /* First dry run to check if req is acceptable */
1508 ret = _setup_req(pl330, 1, thrd, idx, &xs);
1509 if (ret < 0)
1510 goto xfer_exit;
1512 if (ret > pl330->mcbufsz / 2) {
1513 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1514 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1515 ret = -ENOMEM;
1516 goto xfer_exit;
1519 /* Hook the request */
1520 thrd->lstenq = idx;
1521 thrd->req[idx].desc = desc;
1522 _setup_req(pl330, 0, thrd, idx, &xs);
1524 ret = 0;
1526 xfer_exit:
1527 spin_unlock_irqrestore(&pl330->lock, flags);
1529 return ret;
1532 static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1534 struct dma_pl330_chan *pch;
1535 unsigned long flags;
1537 if (!desc)
1538 return;
1540 pch = desc->pchan;
1542 /* If desc aborted */
1543 if (!pch)
1544 return;
1546 spin_lock_irqsave(&pch->lock, flags);
1548 desc->status = DONE;
1550 spin_unlock_irqrestore(&pch->lock, flags);
1552 tasklet_schedule(&pch->task);
1555 static void pl330_dotask(unsigned long data)
1557 struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1558 unsigned long flags;
1559 int i;
1561 spin_lock_irqsave(&pl330->lock, flags);
1563 /* The DMAC itself gone nuts */
1564 if (pl330->dmac_tbd.reset_dmac) {
1565 pl330->state = DYING;
1566 /* Reset the manager too */
1567 pl330->dmac_tbd.reset_mngr = true;
1568 /* Clear the reset flag */
1569 pl330->dmac_tbd.reset_dmac = false;
1572 if (pl330->dmac_tbd.reset_mngr) {
1573 _stop(pl330->manager);
1574 /* Reset all channels */
1575 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1576 /* Clear the reset flag */
1577 pl330->dmac_tbd.reset_mngr = false;
1580 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1582 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1583 struct pl330_thread *thrd = &pl330->channels[i];
1584 void __iomem *regs = pl330->base;
1585 enum pl330_op_err err;
1587 _stop(thrd);
1589 if (readl(regs + FSC) & (1 << thrd->id))
1590 err = PL330_ERR_FAIL;
1591 else
1592 err = PL330_ERR_ABORT;
1594 spin_unlock_irqrestore(&pl330->lock, flags);
1595 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1596 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1597 spin_lock_irqsave(&pl330->lock, flags);
1599 thrd->req[0].desc = NULL;
1600 thrd->req[1].desc = NULL;
1601 thrd->req_running = -1;
1603 /* Clear the reset flag */
1604 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1608 spin_unlock_irqrestore(&pl330->lock, flags);
1610 return;
1613 /* Returns 1 if state was updated, 0 otherwise */
1614 static int pl330_update(struct pl330_dmac *pl330)
1616 struct dma_pl330_desc *descdone;
1617 unsigned long flags;
1618 void __iomem *regs;
1619 u32 val;
1620 int id, ev, ret = 0;
1622 regs = pl330->base;
1624 spin_lock_irqsave(&pl330->lock, flags);
1626 val = readl(regs + FSM) & 0x1;
1627 if (val)
1628 pl330->dmac_tbd.reset_mngr = true;
1629 else
1630 pl330->dmac_tbd.reset_mngr = false;
1632 val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1633 pl330->dmac_tbd.reset_chan |= val;
1634 if (val) {
1635 int i = 0;
1636 while (i < pl330->pcfg.num_chan) {
1637 if (val & (1 << i)) {
1638 dev_info(pl330->ddma.dev,
1639 "Reset Channel-%d\t CS-%x FTC-%x\n",
1640 i, readl(regs + CS(i)),
1641 readl(regs + FTC(i)));
1642 _stop(&pl330->channels[i]);
1644 i++;
1648 /* Check which event happened i.e, thread notified */
1649 val = readl(regs + ES);
1650 if (pl330->pcfg.num_events < 32
1651 && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1652 pl330->dmac_tbd.reset_dmac = true;
1653 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1654 __LINE__);
1655 ret = 1;
1656 goto updt_exit;
1659 for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1660 if (val & (1 << ev)) { /* Event occurred */
1661 struct pl330_thread *thrd;
1662 u32 inten = readl(regs + INTEN);
1663 int active;
1665 /* Clear the event */
1666 if (inten & (1 << ev))
1667 writel(1 << ev, regs + INTCLR);
1669 ret = 1;
1671 id = pl330->events[ev];
1673 thrd = &pl330->channels[id];
1675 active = thrd->req_running;
1676 if (active == -1) /* Aborted */
1677 continue;
1679 /* Detach the req */
1680 descdone = thrd->req[active].desc;
1681 thrd->req[active].desc = NULL;
1683 thrd->req_running = -1;
1685 /* Get going again ASAP */
1686 _start(thrd);
1688 /* For now, just make a list of callbacks to be done */
1689 list_add_tail(&descdone->rqd, &pl330->req_done);
1693 /* Now that we are in no hurry, do the callbacks */
1694 while (!list_empty(&pl330->req_done)) {
1695 descdone = list_first_entry(&pl330->req_done,
1696 struct dma_pl330_desc, rqd);
1697 list_del(&descdone->rqd);
1698 spin_unlock_irqrestore(&pl330->lock, flags);
1699 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1700 spin_lock_irqsave(&pl330->lock, flags);
1703 updt_exit:
1704 spin_unlock_irqrestore(&pl330->lock, flags);
1706 if (pl330->dmac_tbd.reset_dmac
1707 || pl330->dmac_tbd.reset_mngr
1708 || pl330->dmac_tbd.reset_chan) {
1709 ret = 1;
1710 tasklet_schedule(&pl330->tasks);
1713 return ret;
1716 /* Reserve an event */
1717 static inline int _alloc_event(struct pl330_thread *thrd)
1719 struct pl330_dmac *pl330 = thrd->dmac;
1720 int ev;
1722 for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1723 if (pl330->events[ev] == -1) {
1724 pl330->events[ev] = thrd->id;
1725 return ev;
1728 return -1;
1731 static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1733 return pl330->pcfg.irq_ns & (1 << i);
1736 /* Upon success, returns IdentityToken for the
1737 * allocated channel, NULL otherwise.
1739 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1741 struct pl330_thread *thrd = NULL;
1742 int chans, i;
1744 if (pl330->state == DYING)
1745 return NULL;
1747 chans = pl330->pcfg.num_chan;
1749 for (i = 0; i < chans; i++) {
1750 thrd = &pl330->channels[i];
1751 if ((thrd->free) && (!_manager_ns(thrd) ||
1752 _chan_ns(pl330, i))) {
1753 thrd->ev = _alloc_event(thrd);
1754 if (thrd->ev >= 0) {
1755 thrd->free = false;
1756 thrd->lstenq = 1;
1757 thrd->req[0].desc = NULL;
1758 thrd->req[1].desc = NULL;
1759 thrd->req_running = -1;
1760 break;
1763 thrd = NULL;
1766 return thrd;
1769 /* Release an event */
1770 static inline void _free_event(struct pl330_thread *thrd, int ev)
1772 struct pl330_dmac *pl330 = thrd->dmac;
1774 /* If the event is valid and was held by the thread */
1775 if (ev >= 0 && ev < pl330->pcfg.num_events
1776 && pl330->events[ev] == thrd->id)
1777 pl330->events[ev] = -1;
1780 static void pl330_release_channel(struct pl330_thread *thrd)
1782 struct pl330_dmac *pl330;
1784 if (!thrd || thrd->free)
1785 return;
1787 _stop(thrd);
1789 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1790 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1792 pl330 = thrd->dmac;
1794 _free_event(thrd, thrd->ev);
1795 thrd->free = true;
1798 /* Initialize the structure for PL330 configuration, that can be used
1799 * by the client driver the make best use of the DMAC
1801 static void read_dmac_config(struct pl330_dmac *pl330)
1803 void __iomem *regs = pl330->base;
1804 u32 val;
1806 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1807 val &= CRD_DATA_WIDTH_MASK;
1808 pl330->pcfg.data_bus_width = 8 * (1 << val);
1810 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1811 val &= CRD_DATA_BUFF_MASK;
1812 pl330->pcfg.data_buf_dep = val + 1;
1814 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1815 val &= CR0_NUM_CHANS_MASK;
1816 val += 1;
1817 pl330->pcfg.num_chan = val;
1819 val = readl(regs + CR0);
1820 if (val & CR0_PERIPH_REQ_SET) {
1821 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1822 val += 1;
1823 pl330->pcfg.num_peri = val;
1824 pl330->pcfg.peri_ns = readl(regs + CR4);
1825 } else {
1826 pl330->pcfg.num_peri = 0;
1829 val = readl(regs + CR0);
1830 if (val & CR0_BOOT_MAN_NS)
1831 pl330->pcfg.mode |= DMAC_MODE_NS;
1832 else
1833 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1835 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1836 val &= CR0_NUM_EVENTS_MASK;
1837 val += 1;
1838 pl330->pcfg.num_events = val;
1840 pl330->pcfg.irq_ns = readl(regs + CR3);
1843 static inline void _reset_thread(struct pl330_thread *thrd)
1845 struct pl330_dmac *pl330 = thrd->dmac;
1847 thrd->req[0].mc_cpu = pl330->mcode_cpu
1848 + (thrd->id * pl330->mcbufsz);
1849 thrd->req[0].mc_bus = pl330->mcode_bus
1850 + (thrd->id * pl330->mcbufsz);
1851 thrd->req[0].desc = NULL;
1853 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1854 + pl330->mcbufsz / 2;
1855 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1856 + pl330->mcbufsz / 2;
1857 thrd->req[1].desc = NULL;
1859 thrd->req_running = -1;
1862 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1864 int chans = pl330->pcfg.num_chan;
1865 struct pl330_thread *thrd;
1866 int i;
1868 /* Allocate 1 Manager and 'chans' Channel threads */
1869 pl330->channels = kcalloc(1 + chans, sizeof(*thrd),
1870 GFP_KERNEL);
1871 if (!pl330->channels)
1872 return -ENOMEM;
1874 /* Init Channel threads */
1875 for (i = 0; i < chans; i++) {
1876 thrd = &pl330->channels[i];
1877 thrd->id = i;
1878 thrd->dmac = pl330;
1879 _reset_thread(thrd);
1880 thrd->free = true;
1883 /* MANAGER is indexed at the end */
1884 thrd = &pl330->channels[chans];
1885 thrd->id = chans;
1886 thrd->dmac = pl330;
1887 thrd->free = false;
1888 pl330->manager = thrd;
1890 return 0;
1893 static int dmac_alloc_resources(struct pl330_dmac *pl330)
1895 int chans = pl330->pcfg.num_chan;
1896 int ret;
1899 * Alloc MicroCode buffer for 'chans' Channel threads.
1900 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1902 pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
1903 chans * pl330->mcbufsz,
1904 &pl330->mcode_bus, GFP_KERNEL,
1905 DMA_ATTR_PRIVILEGED);
1906 if (!pl330->mcode_cpu) {
1907 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1908 __func__, __LINE__);
1909 return -ENOMEM;
1912 ret = dmac_alloc_threads(pl330);
1913 if (ret) {
1914 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1915 __func__, __LINE__);
1916 dma_free_coherent(pl330->ddma.dev,
1917 chans * pl330->mcbufsz,
1918 pl330->mcode_cpu, pl330->mcode_bus);
1919 return ret;
1922 return 0;
1925 static int pl330_add(struct pl330_dmac *pl330)
1927 int i, ret;
1929 /* Check if we can handle this DMAC */
1930 if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1931 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1932 pl330->pcfg.periph_id);
1933 return -EINVAL;
1936 /* Read the configuration of the DMAC */
1937 read_dmac_config(pl330);
1939 if (pl330->pcfg.num_events == 0) {
1940 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1941 __func__, __LINE__);
1942 return -EINVAL;
1945 spin_lock_init(&pl330->lock);
1947 INIT_LIST_HEAD(&pl330->req_done);
1949 /* Use default MC buffer size if not provided */
1950 if (!pl330->mcbufsz)
1951 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1953 /* Mark all events as free */
1954 for (i = 0; i < pl330->pcfg.num_events; i++)
1955 pl330->events[i] = -1;
1957 /* Allocate resources needed by the DMAC */
1958 ret = dmac_alloc_resources(pl330);
1959 if (ret) {
1960 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1961 return ret;
1964 tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1966 pl330->state = INIT;
1968 return 0;
1971 static int dmac_free_threads(struct pl330_dmac *pl330)
1973 struct pl330_thread *thrd;
1974 int i;
1976 /* Release Channel threads */
1977 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1978 thrd = &pl330->channels[i];
1979 pl330_release_channel(thrd);
1982 /* Free memory */
1983 kfree(pl330->channels);
1985 return 0;
1988 static void pl330_del(struct pl330_dmac *pl330)
1990 pl330->state = UNINIT;
1992 tasklet_kill(&pl330->tasks);
1994 /* Free DMAC resources */
1995 dmac_free_threads(pl330);
1997 dma_free_coherent(pl330->ddma.dev,
1998 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1999 pl330->mcode_bus);
2002 /* forward declaration */
2003 static struct amba_driver pl330_driver;
2005 static inline struct dma_pl330_chan *
2006 to_pchan(struct dma_chan *ch)
2008 if (!ch)
2009 return NULL;
2011 return container_of(ch, struct dma_pl330_chan, chan);
2014 static inline struct dma_pl330_desc *
2015 to_desc(struct dma_async_tx_descriptor *tx)
2017 return container_of(tx, struct dma_pl330_desc, txd);
2020 static inline void fill_queue(struct dma_pl330_chan *pch)
2022 struct dma_pl330_desc *desc;
2023 int ret;
2025 list_for_each_entry(desc, &pch->work_list, node) {
2027 /* If already submitted */
2028 if (desc->status == BUSY)
2029 continue;
2031 ret = pl330_submit_req(pch->thread, desc);
2032 if (!ret) {
2033 desc->status = BUSY;
2034 } else if (ret == -EAGAIN) {
2035 /* QFull or DMAC Dying */
2036 break;
2037 } else {
2038 /* Unacceptable request */
2039 desc->status = DONE;
2040 dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2041 __func__, __LINE__, desc->txd.cookie);
2042 tasklet_schedule(&pch->task);
2047 static void pl330_tasklet(unsigned long data)
2049 struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2050 struct dma_pl330_desc *desc, *_dt;
2051 unsigned long flags;
2052 bool power_down = false;
2054 spin_lock_irqsave(&pch->lock, flags);
2056 /* Pick up ripe tomatoes */
2057 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2058 if (desc->status == DONE) {
2059 if (!pch->cyclic)
2060 dma_cookie_complete(&desc->txd);
2061 list_move_tail(&desc->node, &pch->completed_list);
2064 /* Try to submit a req imm. next to the last completed cookie */
2065 fill_queue(pch);
2067 if (list_empty(&pch->work_list)) {
2068 spin_lock(&pch->thread->dmac->lock);
2069 _stop(pch->thread);
2070 spin_unlock(&pch->thread->dmac->lock);
2071 power_down = true;
2072 pch->active = false;
2073 } else {
2074 /* Make sure the PL330 Channel thread is active */
2075 spin_lock(&pch->thread->dmac->lock);
2076 _start(pch->thread);
2077 spin_unlock(&pch->thread->dmac->lock);
2080 while (!list_empty(&pch->completed_list)) {
2081 struct dmaengine_desc_callback cb;
2083 desc = list_first_entry(&pch->completed_list,
2084 struct dma_pl330_desc, node);
2086 dmaengine_desc_get_callback(&desc->txd, &cb);
2088 if (pch->cyclic) {
2089 desc->status = PREP;
2090 list_move_tail(&desc->node, &pch->work_list);
2091 if (power_down) {
2092 pch->active = true;
2093 spin_lock(&pch->thread->dmac->lock);
2094 _start(pch->thread);
2095 spin_unlock(&pch->thread->dmac->lock);
2096 power_down = false;
2098 } else {
2099 desc->status = FREE;
2100 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2103 dma_descriptor_unmap(&desc->txd);
2105 if (dmaengine_desc_callback_valid(&cb)) {
2106 spin_unlock_irqrestore(&pch->lock, flags);
2107 dmaengine_desc_callback_invoke(&cb, NULL);
2108 spin_lock_irqsave(&pch->lock, flags);
2111 spin_unlock_irqrestore(&pch->lock, flags);
2113 /* If work list empty, power down */
2114 if (power_down) {
2115 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2116 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2120 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2121 struct of_dma *ofdma)
2123 int count = dma_spec->args_count;
2124 struct pl330_dmac *pl330 = ofdma->of_dma_data;
2125 unsigned int chan_id;
2127 if (!pl330)
2128 return NULL;
2130 if (count != 1)
2131 return NULL;
2133 chan_id = dma_spec->args[0];
2134 if (chan_id >= pl330->num_peripherals)
2135 return NULL;
2137 return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2140 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2142 struct dma_pl330_chan *pch = to_pchan(chan);
2143 struct pl330_dmac *pl330 = pch->dmac;
2144 unsigned long flags;
2146 spin_lock_irqsave(&pl330->lock, flags);
2148 dma_cookie_init(chan);
2149 pch->cyclic = false;
2151 pch->thread = pl330_request_channel(pl330);
2152 if (!pch->thread) {
2153 spin_unlock_irqrestore(&pl330->lock, flags);
2154 return -ENOMEM;
2157 tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2159 spin_unlock_irqrestore(&pl330->lock, flags);
2161 return 1;
2165 * We need the data direction between the DMAC (the dma-mapping "device") and
2166 * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing!
2168 static enum dma_data_direction
2169 pl330_dma_slave_map_dir(enum dma_transfer_direction dir)
2171 switch (dir) {
2172 case DMA_MEM_TO_DEV:
2173 return DMA_FROM_DEVICE;
2174 case DMA_DEV_TO_MEM:
2175 return DMA_TO_DEVICE;
2176 case DMA_DEV_TO_DEV:
2177 return DMA_BIDIRECTIONAL;
2178 default:
2179 return DMA_NONE;
2183 static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch)
2185 if (pch->dir != DMA_NONE)
2186 dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma,
2187 1 << pch->burst_sz, pch->dir, 0);
2188 pch->dir = DMA_NONE;
2192 static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch,
2193 enum dma_transfer_direction dir)
2195 struct device *dev = pch->chan.device->dev;
2196 enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir);
2198 /* Already mapped for this config? */
2199 if (pch->dir == dma_dir)
2200 return true;
2202 pl330_unprep_slave_fifo(pch);
2203 pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr,
2204 1 << pch->burst_sz, dma_dir, 0);
2205 if (dma_mapping_error(dev, pch->fifo_dma))
2206 return false;
2208 pch->dir = dma_dir;
2209 return true;
2212 static int fixup_burst_len(int max_burst_len, int quirks)
2214 if (quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
2215 return 1;
2216 else if (max_burst_len > PL330_MAX_BURST)
2217 return PL330_MAX_BURST;
2218 else if (max_burst_len < 1)
2219 return 1;
2220 else
2221 return max_burst_len;
2224 static int pl330_config(struct dma_chan *chan,
2225 struct dma_slave_config *slave_config)
2227 struct dma_pl330_chan *pch = to_pchan(chan);
2229 pl330_unprep_slave_fifo(pch);
2230 if (slave_config->direction == DMA_MEM_TO_DEV) {
2231 if (slave_config->dst_addr)
2232 pch->fifo_addr = slave_config->dst_addr;
2233 if (slave_config->dst_addr_width)
2234 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2235 pch->burst_len = fixup_burst_len(slave_config->dst_maxburst,
2236 pch->dmac->quirks);
2237 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2238 if (slave_config->src_addr)
2239 pch->fifo_addr = slave_config->src_addr;
2240 if (slave_config->src_addr_width)
2241 pch->burst_sz = __ffs(slave_config->src_addr_width);
2242 pch->burst_len = fixup_burst_len(slave_config->src_maxburst,
2243 pch->dmac->quirks);
2246 return 0;
2249 static int pl330_terminate_all(struct dma_chan *chan)
2251 struct dma_pl330_chan *pch = to_pchan(chan);
2252 struct dma_pl330_desc *desc;
2253 unsigned long flags;
2254 struct pl330_dmac *pl330 = pch->dmac;
2255 LIST_HEAD(list);
2256 bool power_down = false;
2258 pm_runtime_get_sync(pl330->ddma.dev);
2259 spin_lock_irqsave(&pch->lock, flags);
2260 spin_lock(&pl330->lock);
2261 _stop(pch->thread);
2262 spin_unlock(&pl330->lock);
2264 pch->thread->req[0].desc = NULL;
2265 pch->thread->req[1].desc = NULL;
2266 pch->thread->req_running = -1;
2267 power_down = pch->active;
2268 pch->active = false;
2270 /* Mark all desc done */
2271 list_for_each_entry(desc, &pch->submitted_list, node) {
2272 desc->status = FREE;
2273 dma_cookie_complete(&desc->txd);
2276 list_for_each_entry(desc, &pch->work_list , node) {
2277 desc->status = FREE;
2278 dma_cookie_complete(&desc->txd);
2281 list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2282 list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2283 list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2284 spin_unlock_irqrestore(&pch->lock, flags);
2285 pm_runtime_mark_last_busy(pl330->ddma.dev);
2286 if (power_down)
2287 pm_runtime_put_autosuspend(pl330->ddma.dev);
2288 pm_runtime_put_autosuspend(pl330->ddma.dev);
2290 return 0;
2294 * We don't support DMA_RESUME command because of hardware
2295 * limitations, so after pausing the channel we cannot restore
2296 * it to active state. We have to terminate channel and setup
2297 * DMA transfer again. This pause feature was implemented to
2298 * allow safely read residue before channel termination.
2300 static int pl330_pause(struct dma_chan *chan)
2302 struct dma_pl330_chan *pch = to_pchan(chan);
2303 struct pl330_dmac *pl330 = pch->dmac;
2304 unsigned long flags;
2306 pm_runtime_get_sync(pl330->ddma.dev);
2307 spin_lock_irqsave(&pch->lock, flags);
2309 spin_lock(&pl330->lock);
2310 _stop(pch->thread);
2311 spin_unlock(&pl330->lock);
2313 spin_unlock_irqrestore(&pch->lock, flags);
2314 pm_runtime_mark_last_busy(pl330->ddma.dev);
2315 pm_runtime_put_autosuspend(pl330->ddma.dev);
2317 return 0;
2320 static void pl330_free_chan_resources(struct dma_chan *chan)
2322 struct dma_pl330_chan *pch = to_pchan(chan);
2323 struct pl330_dmac *pl330 = pch->dmac;
2324 unsigned long flags;
2326 tasklet_kill(&pch->task);
2328 pm_runtime_get_sync(pch->dmac->ddma.dev);
2329 spin_lock_irqsave(&pl330->lock, flags);
2331 pl330_release_channel(pch->thread);
2332 pch->thread = NULL;
2334 if (pch->cyclic)
2335 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2337 spin_unlock_irqrestore(&pl330->lock, flags);
2338 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2339 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2340 pl330_unprep_slave_fifo(pch);
2343 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2344 struct dma_pl330_desc *desc)
2346 struct pl330_thread *thrd = pch->thread;
2347 struct pl330_dmac *pl330 = pch->dmac;
2348 void __iomem *regs = thrd->dmac->base;
2349 u32 val, addr;
2351 pm_runtime_get_sync(pl330->ddma.dev);
2352 val = addr = 0;
2353 if (desc->rqcfg.src_inc) {
2354 val = readl(regs + SA(thrd->id));
2355 addr = desc->px.src_addr;
2356 } else {
2357 val = readl(regs + DA(thrd->id));
2358 addr = desc->px.dst_addr;
2360 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2361 pm_runtime_put_autosuspend(pl330->ddma.dev);
2363 /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2364 if (!val)
2365 return 0;
2367 return val - addr;
2370 static enum dma_status
2371 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2372 struct dma_tx_state *txstate)
2374 enum dma_status ret;
2375 unsigned long flags;
2376 struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2377 struct dma_pl330_chan *pch = to_pchan(chan);
2378 unsigned int transferred, residual = 0;
2380 ret = dma_cookie_status(chan, cookie, txstate);
2382 if (!txstate)
2383 return ret;
2385 if (ret == DMA_COMPLETE)
2386 goto out;
2388 spin_lock_irqsave(&pch->lock, flags);
2389 spin_lock(&pch->thread->dmac->lock);
2391 if (pch->thread->req_running != -1)
2392 running = pch->thread->req[pch->thread->req_running].desc;
2394 last_enq = pch->thread->req[pch->thread->lstenq].desc;
2396 /* Check in pending list */
2397 list_for_each_entry(desc, &pch->work_list, node) {
2398 if (desc->status == DONE)
2399 transferred = desc->bytes_requested;
2400 else if (running && desc == running)
2401 transferred =
2402 pl330_get_current_xferred_count(pch, desc);
2403 else if (desc->status == BUSY)
2405 * Busy but not running means either just enqueued,
2406 * or finished and not yet marked done
2408 if (desc == last_enq)
2409 transferred = 0;
2410 else
2411 transferred = desc->bytes_requested;
2412 else
2413 transferred = 0;
2414 residual += desc->bytes_requested - transferred;
2415 if (desc->txd.cookie == cookie) {
2416 switch (desc->status) {
2417 case DONE:
2418 ret = DMA_COMPLETE;
2419 break;
2420 case PREP:
2421 case BUSY:
2422 ret = DMA_IN_PROGRESS;
2423 break;
2424 default:
2425 WARN_ON(1);
2427 break;
2429 if (desc->last)
2430 residual = 0;
2432 spin_unlock(&pch->thread->dmac->lock);
2433 spin_unlock_irqrestore(&pch->lock, flags);
2435 out:
2436 dma_set_residue(txstate, residual);
2438 return ret;
2441 static void pl330_issue_pending(struct dma_chan *chan)
2443 struct dma_pl330_chan *pch = to_pchan(chan);
2444 unsigned long flags;
2446 spin_lock_irqsave(&pch->lock, flags);
2447 if (list_empty(&pch->work_list)) {
2449 * Warn on nothing pending. Empty submitted_list may
2450 * break our pm_runtime usage counter as it is
2451 * updated on work_list emptiness status.
2453 WARN_ON(list_empty(&pch->submitted_list));
2454 pch->active = true;
2455 pm_runtime_get_sync(pch->dmac->ddma.dev);
2457 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2458 spin_unlock_irqrestore(&pch->lock, flags);
2460 pl330_tasklet((unsigned long)pch);
2464 * We returned the last one of the circular list of descriptor(s)
2465 * from prep_xxx, so the argument to submit corresponds to the last
2466 * descriptor of the list.
2468 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2470 struct dma_pl330_desc *desc, *last = to_desc(tx);
2471 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2472 dma_cookie_t cookie;
2473 unsigned long flags;
2475 spin_lock_irqsave(&pch->lock, flags);
2477 /* Assign cookies to all nodes */
2478 while (!list_empty(&last->node)) {
2479 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2480 if (pch->cyclic) {
2481 desc->txd.callback = last->txd.callback;
2482 desc->txd.callback_param = last->txd.callback_param;
2484 desc->last = false;
2486 dma_cookie_assign(&desc->txd);
2488 list_move_tail(&desc->node, &pch->submitted_list);
2491 last->last = true;
2492 cookie = dma_cookie_assign(&last->txd);
2493 list_add_tail(&last->node, &pch->submitted_list);
2494 spin_unlock_irqrestore(&pch->lock, flags);
2496 return cookie;
2499 static inline void _init_desc(struct dma_pl330_desc *desc)
2501 desc->rqcfg.swap = SWAP_NO;
2502 desc->rqcfg.scctl = CCTRL0;
2503 desc->rqcfg.dcctl = CCTRL0;
2504 desc->txd.tx_submit = pl330_tx_submit;
2506 INIT_LIST_HEAD(&desc->node);
2509 /* Returns the number of descriptors added to the DMAC pool */
2510 static int add_desc(struct list_head *pool, spinlock_t *lock,
2511 gfp_t flg, int count)
2513 struct dma_pl330_desc *desc;
2514 unsigned long flags;
2515 int i;
2517 desc = kcalloc(count, sizeof(*desc), flg);
2518 if (!desc)
2519 return 0;
2521 spin_lock_irqsave(lock, flags);
2523 for (i = 0; i < count; i++) {
2524 _init_desc(&desc[i]);
2525 list_add_tail(&desc[i].node, pool);
2528 spin_unlock_irqrestore(lock, flags);
2530 return count;
2533 static struct dma_pl330_desc *pluck_desc(struct list_head *pool,
2534 spinlock_t *lock)
2536 struct dma_pl330_desc *desc = NULL;
2537 unsigned long flags;
2539 spin_lock_irqsave(lock, flags);
2541 if (!list_empty(pool)) {
2542 desc = list_entry(pool->next,
2543 struct dma_pl330_desc, node);
2545 list_del_init(&desc->node);
2547 desc->status = PREP;
2548 desc->txd.callback = NULL;
2551 spin_unlock_irqrestore(lock, flags);
2553 return desc;
2556 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2558 struct pl330_dmac *pl330 = pch->dmac;
2559 u8 *peri_id = pch->chan.private;
2560 struct dma_pl330_desc *desc;
2562 /* Pluck one desc from the pool of DMAC */
2563 desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock);
2565 /* If the DMAC pool is empty, alloc new */
2566 if (!desc) {
2567 DEFINE_SPINLOCK(lock);
2568 LIST_HEAD(pool);
2570 if (!add_desc(&pool, &lock, GFP_ATOMIC, 1))
2571 return NULL;
2573 desc = pluck_desc(&pool, &lock);
2574 WARN_ON(!desc || !list_empty(&pool));
2577 /* Initialize the descriptor */
2578 desc->pchan = pch;
2579 desc->txd.cookie = 0;
2580 async_tx_ack(&desc->txd);
2582 desc->peri = peri_id ? pch->chan.chan_id : 0;
2583 desc->rqcfg.pcfg = &pch->dmac->pcfg;
2585 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2587 return desc;
2590 static inline void fill_px(struct pl330_xfer *px,
2591 dma_addr_t dst, dma_addr_t src, size_t len)
2593 px->bytes = len;
2594 px->dst_addr = dst;
2595 px->src_addr = src;
2598 static struct dma_pl330_desc *
2599 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2600 dma_addr_t src, size_t len)
2602 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2604 if (!desc) {
2605 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2606 __func__, __LINE__);
2607 return NULL;
2611 * Ideally we should lookout for reqs bigger than
2612 * those that can be programmed with 256 bytes of
2613 * MC buffer, but considering a req size is seldom
2614 * going to be word-unaligned and more than 200MB,
2615 * we take it easy.
2616 * Also, should the limit is reached we'd rather
2617 * have the platform increase MC buffer size than
2618 * complicating this API driver.
2620 fill_px(&desc->px, dst, src, len);
2622 return desc;
2625 /* Call after fixing burst size */
2626 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2628 struct dma_pl330_chan *pch = desc->pchan;
2629 struct pl330_dmac *pl330 = pch->dmac;
2630 int burst_len;
2632 burst_len = pl330->pcfg.data_bus_width / 8;
2633 burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2634 burst_len >>= desc->rqcfg.brst_size;
2636 /* src/dst_burst_len can't be more than 16 */
2637 if (burst_len > PL330_MAX_BURST)
2638 burst_len = PL330_MAX_BURST;
2640 return burst_len;
2643 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2644 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2645 size_t period_len, enum dma_transfer_direction direction,
2646 unsigned long flags)
2648 struct dma_pl330_desc *desc = NULL, *first = NULL;
2649 struct dma_pl330_chan *pch = to_pchan(chan);
2650 struct pl330_dmac *pl330 = pch->dmac;
2651 unsigned int i;
2652 dma_addr_t dst;
2653 dma_addr_t src;
2655 if (len % period_len != 0)
2656 return NULL;
2658 if (!is_slave_direction(direction)) {
2659 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2660 __func__, __LINE__);
2661 return NULL;
2664 if (!pl330_prep_slave_fifo(pch, direction))
2665 return NULL;
2667 for (i = 0; i < len / period_len; i++) {
2668 desc = pl330_get_desc(pch);
2669 if (!desc) {
2670 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2671 __func__, __LINE__);
2673 if (!first)
2674 return NULL;
2676 spin_lock_irqsave(&pl330->pool_lock, flags);
2678 while (!list_empty(&first->node)) {
2679 desc = list_entry(first->node.next,
2680 struct dma_pl330_desc, node);
2681 list_move_tail(&desc->node, &pl330->desc_pool);
2684 list_move_tail(&first->node, &pl330->desc_pool);
2686 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2688 return NULL;
2691 switch (direction) {
2692 case DMA_MEM_TO_DEV:
2693 desc->rqcfg.src_inc = 1;
2694 desc->rqcfg.dst_inc = 0;
2695 src = dma_addr;
2696 dst = pch->fifo_dma;
2697 break;
2698 case DMA_DEV_TO_MEM:
2699 desc->rqcfg.src_inc = 0;
2700 desc->rqcfg.dst_inc = 1;
2701 src = pch->fifo_dma;
2702 dst = dma_addr;
2703 break;
2704 default:
2705 break;
2708 desc->rqtype = direction;
2709 desc->rqcfg.brst_size = pch->burst_sz;
2710 desc->rqcfg.brst_len = pch->burst_len;
2711 desc->bytes_requested = period_len;
2712 fill_px(&desc->px, dst, src, period_len);
2714 if (!first)
2715 first = desc;
2716 else
2717 list_add_tail(&desc->node, &first->node);
2719 dma_addr += period_len;
2722 if (!desc)
2723 return NULL;
2725 pch->cyclic = true;
2726 desc->txd.flags = flags;
2728 return &desc->txd;
2731 static struct dma_async_tx_descriptor *
2732 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2733 dma_addr_t src, size_t len, unsigned long flags)
2735 struct dma_pl330_desc *desc;
2736 struct dma_pl330_chan *pch = to_pchan(chan);
2737 struct pl330_dmac *pl330;
2738 int burst;
2740 if (unlikely(!pch || !len))
2741 return NULL;
2743 pl330 = pch->dmac;
2745 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2746 if (!desc)
2747 return NULL;
2749 desc->rqcfg.src_inc = 1;
2750 desc->rqcfg.dst_inc = 1;
2751 desc->rqtype = DMA_MEM_TO_MEM;
2753 /* Select max possible burst size */
2754 burst = pl330->pcfg.data_bus_width / 8;
2757 * Make sure we use a burst size that aligns with all the memcpy
2758 * parameters because our DMA programming algorithm doesn't cope with
2759 * transfers which straddle an entry in the DMA device's MFIFO.
2761 while ((src | dst | len) & (burst - 1))
2762 burst /= 2;
2764 desc->rqcfg.brst_size = 0;
2765 while (burst != (1 << desc->rqcfg.brst_size))
2766 desc->rqcfg.brst_size++;
2769 * If burst size is smaller than bus width then make sure we only
2770 * transfer one at a time to avoid a burst stradling an MFIFO entry.
2772 if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2773 desc->rqcfg.brst_len = 1;
2775 desc->rqcfg.brst_len = get_burst_len(desc, len);
2776 desc->bytes_requested = len;
2778 desc->txd.flags = flags;
2780 return &desc->txd;
2783 static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2784 struct dma_pl330_desc *first)
2786 unsigned long flags;
2787 struct dma_pl330_desc *desc;
2789 if (!first)
2790 return;
2792 spin_lock_irqsave(&pl330->pool_lock, flags);
2794 while (!list_empty(&first->node)) {
2795 desc = list_entry(first->node.next,
2796 struct dma_pl330_desc, node);
2797 list_move_tail(&desc->node, &pl330->desc_pool);
2800 list_move_tail(&first->node, &pl330->desc_pool);
2802 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2805 static struct dma_async_tx_descriptor *
2806 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2807 unsigned int sg_len, enum dma_transfer_direction direction,
2808 unsigned long flg, void *context)
2810 struct dma_pl330_desc *first, *desc = NULL;
2811 struct dma_pl330_chan *pch = to_pchan(chan);
2812 struct scatterlist *sg;
2813 int i;
2815 if (unlikely(!pch || !sgl || !sg_len))
2816 return NULL;
2818 if (!pl330_prep_slave_fifo(pch, direction))
2819 return NULL;
2821 first = NULL;
2823 for_each_sg(sgl, sg, sg_len, i) {
2825 desc = pl330_get_desc(pch);
2826 if (!desc) {
2827 struct pl330_dmac *pl330 = pch->dmac;
2829 dev_err(pch->dmac->ddma.dev,
2830 "%s:%d Unable to fetch desc\n",
2831 __func__, __LINE__);
2832 __pl330_giveback_desc(pl330, first);
2834 return NULL;
2837 if (!first)
2838 first = desc;
2839 else
2840 list_add_tail(&desc->node, &first->node);
2842 if (direction == DMA_MEM_TO_DEV) {
2843 desc->rqcfg.src_inc = 1;
2844 desc->rqcfg.dst_inc = 0;
2845 fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg),
2846 sg_dma_len(sg));
2847 } else {
2848 desc->rqcfg.src_inc = 0;
2849 desc->rqcfg.dst_inc = 1;
2850 fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma,
2851 sg_dma_len(sg));
2854 desc->rqcfg.brst_size = pch->burst_sz;
2855 desc->rqcfg.brst_len = pch->burst_len;
2856 desc->rqtype = direction;
2857 desc->bytes_requested = sg_dma_len(sg);
2860 /* Return the last desc in the chain */
2861 desc->txd.flags = flg;
2862 return &desc->txd;
2865 static irqreturn_t pl330_irq_handler(int irq, void *data)
2867 if (pl330_update(data))
2868 return IRQ_HANDLED;
2869 else
2870 return IRQ_NONE;
2873 #define PL330_DMA_BUSWIDTHS \
2874 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2875 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2876 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2877 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2878 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2881 * Runtime PM callbacks are provided by amba/bus.c driver.
2883 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2884 * bus driver will only disable/enable the clock in runtime PM callbacks.
2886 static int __maybe_unused pl330_suspend(struct device *dev)
2888 struct amba_device *pcdev = to_amba_device(dev);
2890 pm_runtime_disable(dev);
2892 if (!pm_runtime_status_suspended(dev)) {
2893 /* amba did not disable the clock */
2894 amba_pclk_disable(pcdev);
2896 amba_pclk_unprepare(pcdev);
2898 return 0;
2901 static int __maybe_unused pl330_resume(struct device *dev)
2903 struct amba_device *pcdev = to_amba_device(dev);
2904 int ret;
2906 ret = amba_pclk_prepare(pcdev);
2907 if (ret)
2908 return ret;
2910 if (!pm_runtime_status_suspended(dev))
2911 ret = amba_pclk_enable(pcdev);
2913 pm_runtime_enable(dev);
2915 return ret;
2918 static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2920 static int
2921 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2923 struct pl330_config *pcfg;
2924 struct pl330_dmac *pl330;
2925 struct dma_pl330_chan *pch, *_p;
2926 struct dma_device *pd;
2927 struct resource *res;
2928 int i, ret, irq;
2929 int num_chan;
2930 struct device_node *np = adev->dev.of_node;
2932 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2933 if (ret)
2934 return ret;
2936 /* Allocate a new DMAC and its Channels */
2937 pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2938 if (!pl330)
2939 return -ENOMEM;
2941 pd = &pl330->ddma;
2942 pd->dev = &adev->dev;
2944 pl330->mcbufsz = 0;
2946 /* get quirk */
2947 for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2948 if (of_property_read_bool(np, of_quirks[i].quirk))
2949 pl330->quirks |= of_quirks[i].id;
2951 res = &adev->res;
2952 pl330->base = devm_ioremap_resource(&adev->dev, res);
2953 if (IS_ERR(pl330->base))
2954 return PTR_ERR(pl330->base);
2956 amba_set_drvdata(adev, pl330);
2958 for (i = 0; i < AMBA_NR_IRQS; i++) {
2959 irq = adev->irq[i];
2960 if (irq) {
2961 ret = devm_request_irq(&adev->dev, irq,
2962 pl330_irq_handler, 0,
2963 dev_name(&adev->dev), pl330);
2964 if (ret)
2965 return ret;
2966 } else {
2967 break;
2971 pcfg = &pl330->pcfg;
2973 pcfg->periph_id = adev->periphid;
2974 ret = pl330_add(pl330);
2975 if (ret)
2976 return ret;
2978 INIT_LIST_HEAD(&pl330->desc_pool);
2979 spin_lock_init(&pl330->pool_lock);
2981 /* Create a descriptor pool of default size */
2982 if (!add_desc(&pl330->desc_pool, &pl330->pool_lock,
2983 GFP_KERNEL, NR_DEFAULT_DESC))
2984 dev_warn(&adev->dev, "unable to allocate desc\n");
2986 INIT_LIST_HEAD(&pd->channels);
2988 /* Initialize channel parameters */
2989 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2991 pl330->num_peripherals = num_chan;
2993 pl330->peripherals = kcalloc(num_chan, sizeof(*pch), GFP_KERNEL);
2994 if (!pl330->peripherals) {
2995 ret = -ENOMEM;
2996 goto probe_err2;
2999 for (i = 0; i < num_chan; i++) {
3000 pch = &pl330->peripherals[i];
3002 pch->chan.private = adev->dev.of_node;
3003 INIT_LIST_HEAD(&pch->submitted_list);
3004 INIT_LIST_HEAD(&pch->work_list);
3005 INIT_LIST_HEAD(&pch->completed_list);
3006 spin_lock_init(&pch->lock);
3007 pch->thread = NULL;
3008 pch->chan.device = pd;
3009 pch->dmac = pl330;
3010 pch->dir = DMA_NONE;
3012 /* Add the channel to the DMAC list */
3013 list_add_tail(&pch->chan.device_node, &pd->channels);
3016 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
3017 if (pcfg->num_peri) {
3018 dma_cap_set(DMA_SLAVE, pd->cap_mask);
3019 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
3020 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
3023 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
3024 pd->device_free_chan_resources = pl330_free_chan_resources;
3025 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
3026 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
3027 pd->device_tx_status = pl330_tx_status;
3028 pd->device_prep_slave_sg = pl330_prep_slave_sg;
3029 pd->device_config = pl330_config;
3030 pd->device_pause = pl330_pause;
3031 pd->device_terminate_all = pl330_terminate_all;
3032 pd->device_issue_pending = pl330_issue_pending;
3033 pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
3034 pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
3035 pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
3036 pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
3037 pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
3038 1 : PL330_MAX_BURST);
3040 ret = dma_async_device_register(pd);
3041 if (ret) {
3042 dev_err(&adev->dev, "unable to register DMAC\n");
3043 goto probe_err3;
3046 if (adev->dev.of_node) {
3047 ret = of_dma_controller_register(adev->dev.of_node,
3048 of_dma_pl330_xlate, pl330);
3049 if (ret) {
3050 dev_err(&adev->dev,
3051 "unable to register DMA to the generic DT DMA helpers\n");
3055 adev->dev.dma_parms = &pl330->dma_parms;
3058 * This is the limit for transfers with a buswidth of 1, larger
3059 * buswidths will have larger limits.
3061 ret = dma_set_max_seg_size(&adev->dev, 1900800);
3062 if (ret)
3063 dev_err(&adev->dev, "unable to set the seg size\n");
3066 dev_info(&adev->dev,
3067 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
3068 dev_info(&adev->dev,
3069 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
3070 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
3071 pcfg->num_peri, pcfg->num_events);
3073 pm_runtime_irq_safe(&adev->dev);
3074 pm_runtime_use_autosuspend(&adev->dev);
3075 pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
3076 pm_runtime_mark_last_busy(&adev->dev);
3077 pm_runtime_put_autosuspend(&adev->dev);
3079 return 0;
3080 probe_err3:
3081 /* Idle the DMAC */
3082 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3083 chan.device_node) {
3085 /* Remove the channel */
3086 list_del(&pch->chan.device_node);
3088 /* Flush the channel */
3089 if (pch->thread) {
3090 pl330_terminate_all(&pch->chan);
3091 pl330_free_chan_resources(&pch->chan);
3094 probe_err2:
3095 pl330_del(pl330);
3097 return ret;
3100 static int pl330_remove(struct amba_device *adev)
3102 struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3103 struct dma_pl330_chan *pch, *_p;
3104 int i, irq;
3106 pm_runtime_get_noresume(pl330->ddma.dev);
3108 if (adev->dev.of_node)
3109 of_dma_controller_free(adev->dev.of_node);
3111 for (i = 0; i < AMBA_NR_IRQS; i++) {
3112 irq = adev->irq[i];
3113 if (irq)
3114 devm_free_irq(&adev->dev, irq, pl330);
3117 dma_async_device_unregister(&pl330->ddma);
3119 /* Idle the DMAC */
3120 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3121 chan.device_node) {
3123 /* Remove the channel */
3124 list_del(&pch->chan.device_node);
3126 /* Flush the channel */
3127 if (pch->thread) {
3128 pl330_terminate_all(&pch->chan);
3129 pl330_free_chan_resources(&pch->chan);
3133 pl330_del(pl330);
3135 return 0;
3138 static const struct amba_id pl330_ids[] = {
3140 .id = 0x00041330,
3141 .mask = 0x000fffff,
3143 { 0, 0 },
3146 MODULE_DEVICE_TABLE(amba, pl330_ids);
3148 static struct amba_driver pl330_driver = {
3149 .drv = {
3150 .owner = THIS_MODULE,
3151 .name = "dma-pl330",
3152 .pm = &pl330_pm,
3154 .id_table = pl330_ids,
3155 .probe = pl330_probe,
3156 .remove = pl330_remove,
3159 module_amba_driver(pl330_driver);
3161 MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3162 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3163 MODULE_LICENSE("GPL");