5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
40 #include <media/v4l2-common.h>
41 #include <media/tvaudio.h>
42 #include "bttv-audio-hook.h"
45 static void boot_msp34xx(struct bttv
*btv
, int pin
);
46 static void boot_bt832(struct bttv
*btv
);
47 static void hauppauge_eeprom(struct bttv
*btv
);
48 static void avermedia_eeprom(struct bttv
*btv
);
49 static void osprey_eeprom(struct bttv
*btv
, const u8 ee
[256]);
50 static void modtec_eeprom(struct bttv
*btv
);
51 static void init_PXC200(struct bttv
*btv
);
52 static void init_RTV24(struct bttv
*btv
);
54 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
);
55 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
);
56 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
);
57 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
);
58 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
);
60 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
);
62 static void picolo_tetra_muxsel(struct bttv
*btv
, unsigned int input
);
63 static void picolo_tetra_init(struct bttv
*btv
);
65 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
);
66 static void tibetCS16_init(struct bttv
*btv
);
68 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
);
69 static void kodicom4400r_init(struct bttv
*btv
);
71 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
);
72 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
);
74 static void geovision_muxsel(struct bttv
*btv
, unsigned int input
);
76 static int terratec_active_radio_upgrade(struct bttv
*btv
);
77 static int tea5757_read(struct bttv
*btv
);
78 static int tea5757_write(struct bttv
*btv
, int value
);
79 static void identify_by_eeprom(struct bttv
*btv
,
80 unsigned char eeprom_data
[256]);
81 static int __devinit
pvr_boot(struct bttv
*btv
);
83 /* config variables */
84 static unsigned int triton1
;
85 static unsigned int vsfx
;
86 static unsigned int latency
= UNSET
;
89 static unsigned int card
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
90 static unsigned int pll
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
91 static unsigned int tuner
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
92 static unsigned int svhs
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
93 static unsigned int remote
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = UNSET
};
94 static struct bttv
*master
[BTTV_MAX
] = { [ 0 ... (BTTV_MAX
-1) ] = NULL
};
96 static unsigned int autoload
= 1;
98 static unsigned int autoload
;
100 static unsigned int gpiomask
= UNSET
;
101 static unsigned int audioall
= UNSET
;
102 static unsigned int audiomux
[5] = { [ 0 ... 4 ] = UNSET
};
105 module_param(triton1
, int, 0444);
106 module_param(vsfx
, int, 0444);
107 module_param(no_overlay
, int, 0444);
108 module_param(latency
, int, 0444);
109 module_param(gpiomask
, int, 0444);
110 module_param(audioall
, int, 0444);
111 module_param(autoload
, int, 0444);
113 module_param_array(card
, int, NULL
, 0444);
114 module_param_array(pll
, int, NULL
, 0444);
115 module_param_array(tuner
, int, NULL
, 0444);
116 module_param_array(svhs
, int, NULL
, 0444);
117 module_param_array(remote
, int, NULL
, 0444);
118 module_param_array(audiomux
, int, NULL
, 0444);
120 MODULE_PARM_DESC(triton1
,"set ETBF pci config bit "
121 "[enable bug compatibility for triton1 + others]");
122 MODULE_PARM_DESC(vsfx
,"set VSFX pci config bit "
123 "[yet another chipset flaw workaround]");
124 MODULE_PARM_DESC(latency
,"pci latency timer");
125 MODULE_PARM_DESC(card
,"specify TV/grabber card model, see CARDLIST file for a list");
126 MODULE_PARM_DESC(pll
,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
127 MODULE_PARM_DESC(tuner
,"specify installed tuner type");
128 MODULE_PARM_DESC(autoload
,"automatically load i2c modules like tuner.o, default is 1 (yes)");
129 MODULE_PARM_DESC(no_overlay
,"allow override overlay default (0 disables, 1 enables)"
130 " [some VIA/SIS chipsets are known to have problem with overlay]");
132 /* ----------------------------------------------------------------------- */
133 /* list of card IDs for bt878+ cards */
139 } cards
[] __devinitdata
= {
140 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV" },
141 { 0x39000070, BTTV_BOARD_HAUPPAUGE878
, "Hauppauge WinTV-D" },
142 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR
, "Hauppauge WinTV/PVR" },
143 { 0xff000070, BTTV_BOARD_OSPREY1x0
, "Osprey-100" },
144 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID
,"Osprey-200" },
145 { 0xff020070, BTTV_BOARD_OSPREY500
, "Osprey-500" },
146 { 0xff030070, BTTV_BOARD_OSPREY2000
, "Osprey-2000" },
147 { 0xff040070, BTTV_BOARD_OSPREY540
, "Osprey-540" },
148 { 0xff070070, BTTV_BOARD_OSPREY440
, "Osprey-440" },
150 { 0x00011002, BTTV_BOARD_ATI_TVWONDER
, "ATI TV Wonder" },
151 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE
,"ATI TV Wonder/VE" },
153 { 0x6606107d, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
154 { 0x6607107d, BTTV_BOARD_WINFASTVC100
, "Leadtek WinFast VC 100" },
155 { 0x6609107d, BTTV_BOARD_WINFAST2000
, "Leadtek TV 2000 XP" },
156 { 0x263610b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
157 { 0x264510b4, BTTV_BOARD_STB2
, "STB TV PCI FM, Gateway P/N 6000704" },
158 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI
, "I-O Data Co. GV-BCTV3/PCI" },
159 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI
, "I-O Data Co. GV-BCTV4/PCI" },
160 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
161 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI
, "I-O Data Co. GV-BCTV5/PCI" },
163 { 0x001211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
164 /* some cards ship with byteswapped IDs ... */
165 { 0x1200bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
166 { 0xff00bd11, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV [bswap]" },
167 /* this seems to happen as well ... */
168 { 0xff1211bd, BTTV_BOARD_PINNACLE
, "Pinnacle PCTV" },
170 { 0x3000121a, BTTV_BOARD_VOODOOTV_200
, "3Dfx VoodooTV 200" },
171 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM
, "3Dfx VoodooTV FM" },
172 { 0x3060121a, BTTV_BOARD_STB2
, "3Dfx VoodooTV 100/ STB OEM" },
174 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063
, "(Askey Magic/others) TView99 CPH06x" },
175 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063
, "CPH06X TView99-Card" },
176 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH05x" },
177 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061
, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
178 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061
, "Askey CPH050" },
179 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061
, "TView 99 (CPH061)" },
180 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS
, "Phoebe TV Master (CPH060)" },
182 { 0x00011461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
183 { 0x00021461, BTTV_BOARD_AVERMEDIA98
, "AVermedia TVCapture 98" },
184 { 0x00031461, BTTV_BOARD_AVPHONE98
, "AVerMedia TVPhone98" },
185 { 0x00041461, BTTV_BOARD_AVERMEDIA98
, "AVerMedia TVCapture 98" },
186 { 0x03001461, BTTV_BOARD_AVERMEDIA98
, "VDOMATE TV TUNER CARD" },
188 { 0x1117153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL B/G)" },
189 { 0x1118153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL B/G)" },
190 { 0x1119153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Philips PAL I)" },
191 { 0x111a153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (Temic PAL I)" },
193 { 0x1123153b, BTTV_BOARD_TERRATVRADIO
, "Terratec TV Radio+" },
194 { 0x1127153b, BTTV_BOARD_TERRATV
, "Terratec TV+ (V1.05)" },
195 /* clashes with FlyVideo
196 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
197 { 0x1134153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue (LR102)" },
198 { 0x1135153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* LR102 */
199 { 0x5018153b, BTTV_BOARD_TERRATVALUE
, "Terratec TValue" }, /* ?? */
200 { 0xff3b153b, BTTV_BOARD_TERRATVALUER
, "Terratec TValue Radio" }, /* ?? */
202 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
203 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV" },
204 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
205 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
206 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE
, "Zoltrix Genie TV / Radio" },
208 { 0x1430aa00, BTTV_BOARD_PV143
, "Provideo PV143A" },
209 { 0x1431aa00, BTTV_BOARD_PV143
, "Provideo PV143B" },
210 { 0x1432aa00, BTTV_BOARD_PV143
, "Provideo PV143C" },
211 { 0x1433aa00, BTTV_BOARD_PV143
, "Provideo PV143D" },
212 { 0x1433aa03, BTTV_BOARD_PV143
, "Security Eyes" },
214 { 0x1460aa00, BTTV_BOARD_PV150
, "Provideo PV150A-1" },
215 { 0x1461aa01, BTTV_BOARD_PV150
, "Provideo PV150A-2" },
216 { 0x1462aa02, BTTV_BOARD_PV150
, "Provideo PV150A-3" },
217 { 0x1463aa03, BTTV_BOARD_PV150
, "Provideo PV150A-4" },
219 { 0x1464aa04, BTTV_BOARD_PV150
, "Provideo PV150B-1" },
220 { 0x1465aa05, BTTV_BOARD_PV150
, "Provideo PV150B-2" },
221 { 0x1466aa06, BTTV_BOARD_PV150
, "Provideo PV150B-3" },
222 { 0x1467aa07, BTTV_BOARD_PV150
, "Provideo PV150B-4" },
224 { 0xa132ff00, BTTV_BOARD_IVC100
, "IVC-100" },
225 { 0xa1550000, BTTV_BOARD_IVC200
, "IVC-200" },
226 { 0xa1550001, BTTV_BOARD_IVC200
, "IVC-200" },
227 { 0xa1550002, BTTV_BOARD_IVC200
, "IVC-200" },
228 { 0xa1550003, BTTV_BOARD_IVC200
, "IVC-200" },
229 { 0xa1550100, BTTV_BOARD_IVC200
, "IVC-200G" },
230 { 0xa1550101, BTTV_BOARD_IVC200
, "IVC-200G" },
231 { 0xa1550102, BTTV_BOARD_IVC200
, "IVC-200G" },
232 { 0xa1550103, BTTV_BOARD_IVC200
, "IVC-200G" },
233 { 0xa182ff00, BTTV_BOARD_IVC120
, "IVC-120G" },
234 { 0xa182ff01, BTTV_BOARD_IVC120
, "IVC-120G" },
235 { 0xa182ff02, BTTV_BOARD_IVC120
, "IVC-120G" },
236 { 0xa182ff03, BTTV_BOARD_IVC120
, "IVC-120G" },
237 { 0xa182ff04, BTTV_BOARD_IVC120
, "IVC-120G" },
238 { 0xa182ff05, BTTV_BOARD_IVC120
, "IVC-120G" },
239 { 0xa182ff06, BTTV_BOARD_IVC120
, "IVC-120G" },
240 { 0xa182ff07, BTTV_BOARD_IVC120
, "IVC-120G" },
241 { 0xa182ff08, BTTV_BOARD_IVC120
, "IVC-120G" },
242 { 0xa182ff09, BTTV_BOARD_IVC120
, "IVC-120G" },
243 { 0xa182ff0a, BTTV_BOARD_IVC120
, "IVC-120G" },
244 { 0xa182ff0b, BTTV_BOARD_IVC120
, "IVC-120G" },
245 { 0xa182ff0c, BTTV_BOARD_IVC120
, "IVC-120G" },
246 { 0xa182ff0d, BTTV_BOARD_IVC120
, "IVC-120G" },
247 { 0xa182ff0e, BTTV_BOARD_IVC120
, "IVC-120G" },
248 { 0xa182ff0f, BTTV_BOARD_IVC120
, "IVC-120G" },
250 { 0x41424344, BTTV_BOARD_GRANDTEC
, "GrandTec Multi Capture" },
251 { 0x01020304, BTTV_BOARD_XGUARD
, "Grandtec Grand X-Guard" },
253 { 0x18501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
254 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2
, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
255 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ
, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
256 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW
, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
257 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM
, "Lifeview FlyVideo 98 LR50 Rev Q" },
258 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98
, "Lifeview Flyvideo 98" },
260 { 0x010115cb, BTTV_BOARD_GMV1
, "AG GMV1" },
261 { 0x010114c7, BTTV_BOARD_MODTEC_205
, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
263 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878
, "STB ???" },
264 { 0x217d6606, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
265 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000
, "Leadtek WinFast TV 2000" },
266 { 0x03116000, BTTV_BOARD_SENSORAY311
, "Sensoray 311" },
267 { 0x00790e11, BTTV_BOARD_WINDVR
, "Canopus WinDVR PCI" },
268 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX
, "Face to Face Tvmax" },
269 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100
, "SIMUS GVC1100" },
270 { 0x146caa0c, BTTV_BOARD_PV951
, "ituner spectra8" },
271 { 0x200a1295, BTTV_BOARD_PXC200
, "ImageNation PXC200A" },
273 { 0x40111554, BTTV_BOARD_PV_BT878P_9B
, "Prolink Pixelview PV-BT" },
274 { 0x17de0a01, BTTV_BOARD_KWORLD
, "Mecer TV/FM/Video Tuner" },
276 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #1" },
277 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #2" },
278 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #3" },
279 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP
, "Picolo Tetra Chip #4" },
281 { 0x15409511, BTTV_BOARD_ACORP_Y878F
, "Acorp Y878F" },
283 { 0x53534149, BTTV_BOARD_SSAI_SECURITY
, "SSAI Security Video Interface" },
284 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND
, "SSAI Ultrasound Video Interface" },
286 /* likely broken, vendor id doesn't match the other magic views ...
287 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
289 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
290 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
292 /* DVB cards (using pci function .1 for mpeg data xfer) */
293 { 0x001c11bd, BTTV_BOARD_PINNACLESAT
, "Pinnacle PCTV Sat" },
294 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV
, "Nebula Electronics DigiTV" },
295 { 0x20007063, BTTV_BOARD_PC_HDTV
, "pcHDTV HD-2000 TV"},
296 { 0x002611bd, BTTV_BOARD_TWINHAN_DST
, "Pinnacle PCTV SAT CI" },
297 { 0x00011822, BTTV_BOARD_TWINHAN_DST
, "Twinhan VisionPlus DVB" },
298 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST
, "ChainTech digitop DST-1000 DVB-S" },
299 { 0x07711461, BTTV_BOARD_AVDVBT_771
, "AVermedia AverTV DVB-T 771" },
300 { 0x07611461, BTTV_BOARD_AVDVBT_761
, "AverMedia AverTV DVB-T 761" },
301 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE
, "DViCO FusionHDTV DVB-T Lite" },
302 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE
, "Ultraview DVB-T Lite" },
303 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
, "DViCO FusionHDTV 5 Lite" },
304 { 0x00261822, BTTV_BOARD_TWINHAN_DST
, "DNTV Live! Mini "},
305 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2
, "DViCO FusionHDTV 2" },
306 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600
, "GeoVision GV-600" },
311 /* ----------------------------------------------------------------------- */
312 /* array with description for bt848 / bt878 tv/grabber cards */
314 struct tvcard bttv_tvcards
[] = {
315 /* ---- card 0x00 ---------------------------------- */
316 [BTTV_BOARD_UNKNOWN
] = {
317 .name
= " *** UNKNOWN/GENERIC *** ",
322 .muxsel
= { 2, 3, 1, 0 },
324 .tuner_addr
= ADDR_UNSET
,
325 .radio_addr
= ADDR_UNSET
,
327 [BTTV_BOARD_MIRO
] = {
334 .muxsel
= { 2, 3, 1, 1 },
335 .gpiomux
= { 2, 0, 0, 0 },
339 .tuner_addr
= ADDR_UNSET
,
340 .radio_addr
= ADDR_UNSET
,
342 [BTTV_BOARD_HAUPPAUGE
] = {
343 .name
= "Hauppauge (bt848)",
349 .muxsel
= { 2, 3, 1, 1 },
350 .gpiomux
= { 0, 1, 2, 3 },
354 .tuner_addr
= ADDR_UNSET
,
355 .radio_addr
= ADDR_UNSET
,
358 .name
= "STB, Gateway P/N 6000699 (bt848)",
364 .muxsel
= { 2, 3, 1, 1 },
365 .gpiomux
= { 4, 0, 2, 3 },
369 .tuner_type
= TUNER_PHILIPS_NTSC
,
370 .tuner_addr
= ADDR_UNSET
,
371 .radio_addr
= ADDR_UNSET
,
376 /* ---- card 0x04 ---------------------------------- */
377 [BTTV_BOARD_INTEL
] = {
378 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
384 .muxsel
= { 2, 3, 1, 1 },
387 .tuner_type
= TUNER_ABSENT
,
388 .tuner_addr
= ADDR_UNSET
,
389 .radio_addr
= ADDR_UNSET
,
391 [BTTV_BOARD_DIAMOND
] = {
392 .name
= "Diamond DTV2000",
398 .muxsel
= { 2, 3, 1, 0 },
399 .gpiomux
= { 0, 1, 0, 1 },
403 .tuner_addr
= ADDR_UNSET
,
404 .radio_addr
= ADDR_UNSET
,
406 [BTTV_BOARD_AVERMEDIA
] = {
407 .name
= "AVerMedia TVPhone",
412 .muxsel
= { 2, 3, 1, 1 },
414 .gpiomux
= { 0x0c, 0x04, 0x08, 0x04 },
415 /* 0x04 for some cards ?? */
418 .tuner_addr
= ADDR_UNSET
,
419 .radio_addr
= ADDR_UNSET
,
420 .audio_mode_gpio
= avermedia_tvphone_audio
,
423 [BTTV_BOARD_MATRIX_VISION
] = {
424 .name
= "MATRIX-Vision MV-Delta",
430 .muxsel
= { 2, 3, 1, 0, 0 },
434 .tuner_addr
= ADDR_UNSET
,
435 .radio_addr
= ADDR_UNSET
,
438 /* ---- card 0x08 ---------------------------------- */
439 [BTTV_BOARD_FLYVIDEO
] = {
440 .name
= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
446 .muxsel
= { 2, 3, 1, 1 },
447 .gpiomux
= { 0, 0xc00, 0x800, 0x400 },
452 .tuner_addr
= ADDR_UNSET
,
453 .radio_addr
= ADDR_UNSET
,
455 [BTTV_BOARD_TURBOTV
] = {
456 .name
= "IMS/IXmicro TurboTV",
462 .muxsel
= { 2, 3, 1, 1 },
463 .gpiomux
= { 1, 1, 2, 3 },
466 .tuner_type
= TUNER_TEMIC_PAL
,
467 .tuner_addr
= ADDR_UNSET
,
468 .radio_addr
= ADDR_UNSET
,
470 [BTTV_BOARD_HAUPPAUGE878
] = {
471 .name
= "Hauppauge (bt878)",
476 .gpiomask
= 0x0f, /* old: 7 */
477 .muxsel
= { 2, 0, 1, 1 },
478 .gpiomux
= { 0, 1, 2, 3 },
483 .tuner_addr
= ADDR_UNSET
,
484 .radio_addr
= ADDR_UNSET
,
486 [BTTV_BOARD_MIROPRO
] = {
487 .name
= "MIRO PCTV pro",
493 .muxsel
= { 2, 3, 1, 1 },
494 .gpiomux
= { 0x20001,0x10001, 0, 0 },
498 .tuner_addr
= ADDR_UNSET
,
499 .radio_addr
= ADDR_UNSET
,
502 /* ---- card 0x0c ---------------------------------- */
503 [BTTV_BOARD_ADSTECH_TV
] = {
504 .name
= "ADS Technologies Channel Surfer TV (bt848)",
510 .muxsel
= { 2, 3, 1, 1 },
511 .gpiomux
= { 13, 14, 11, 7 },
514 .tuner_addr
= ADDR_UNSET
,
515 .radio_addr
= ADDR_UNSET
,
517 [BTTV_BOARD_AVERMEDIA98
] = {
518 .name
= "AVerMedia TVCapture 98",
524 .muxsel
= { 2, 3, 1, 1 },
525 .gpiomux
= { 13, 14, 11, 7 },
529 .tuner_type
= TUNER_PHILIPS_PAL
,
530 .tuner_addr
= ADDR_UNSET
,
531 .radio_addr
= ADDR_UNSET
,
532 .audio_mode_gpio
= avermedia_tv_stereo_audio
,
536 .name
= "Aimslab Video Highway Xtreme (VHX)",
542 .muxsel
= { 2, 3, 1, 1 },
543 .gpiomux
= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
548 .tuner_addr
= ADDR_UNSET
,
549 .radio_addr
= ADDR_UNSET
,
551 [BTTV_BOARD_ZOLTRIX
] = {
552 .name
= "Zoltrix TV-Max",
558 .muxsel
= { 2, 3, 1, 1 },
559 .gpiomux
= { 0, 0, 1, 0 },
563 .tuner_addr
= ADDR_UNSET
,
564 .radio_addr
= ADDR_UNSET
,
567 /* ---- card 0x10 ---------------------------------- */
568 [BTTV_BOARD_PIXVIEWPLAYTV
] = {
569 .name
= "Prolink Pixelview PlayTV (bt878)",
574 .gpiomask
= 0x01fe00,
575 .muxsel
= { 2, 3, 1, 1 },
576 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
577 .gpiomux
= { 0x001e00, 0, 0x018000, 0x014000 },
578 .gpiomute
= 0x002000,
582 .tuner_addr
= ADDR_UNSET
,
583 .radio_addr
= ADDR_UNSET
,
585 [BTTV_BOARD_WINVIEW_601
] = {
586 .name
= "Leadtek WinView 601",
591 .gpiomask
= 0x8300f8,
592 .muxsel
= { 2, 3, 1, 1,0 },
593 .gpiomux
= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
594 .gpiomute
= 0xcfa007,
597 .tuner_addr
= ADDR_UNSET
,
598 .radio_addr
= ADDR_UNSET
,
599 .volume_gpio
= winview_volume
,
602 [BTTV_BOARD_AVEC_INTERCAP
] = {
603 .name
= "AVEC Intercapture",
609 .muxsel
= { 2, 3, 1, 1 },
610 .gpiomux
= { 1, 0, 0, 0 },
613 .tuner_addr
= ADDR_UNSET
,
614 .radio_addr
= ADDR_UNSET
,
616 [BTTV_BOARD_LIFE_FLYKIT
] = {
617 .name
= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
622 .gpiomask
= 0x8dff00,
623 .muxsel
= { 2, 3, 1, 1 },
627 .tuner_addr
= ADDR_UNSET
,
628 .radio_addr
= ADDR_UNSET
,
631 /* ---- card 0x14 ---------------------------------- */
632 [BTTV_BOARD_CEI_RAFFLES
] = {
633 .name
= "CEI Raffles Card",
638 .muxsel
= { 2, 3, 1, 1 },
640 .tuner_addr
= ADDR_UNSET
,
641 .radio_addr
= ADDR_UNSET
,
643 [BTTV_BOARD_CONFERENCETV
] = {
644 .name
= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
646 .audio_inputs
= 2, /* tuner, line in */
650 .muxsel
= { 2, 3, 1, 1 },
651 .gpiomux
= { 0, 0x800, 0x1000, 0x1000 },
654 .tuner_type
= TUNER_PHILIPS_PAL_I
,
655 .tuner_addr
= ADDR_UNSET
,
656 .radio_addr
= ADDR_UNSET
,
658 [BTTV_BOARD_PHOEBE_TVMAS
] = {
659 .name
= "Askey CPH050/ Phoebe Tv Master + FM",
665 .muxsel
= { 2, 3, 1, 1 },
666 .gpiomux
= { 0, 1, 0x800, 0x400 },
671 .tuner_addr
= ADDR_UNSET
,
672 .radio_addr
= ADDR_UNSET
,
674 [BTTV_BOARD_MODTEC_205
] = {
675 .name
= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
681 .muxsel
= { 2, 3, -1 },
682 .digital_mode
= DIGITAL_MODE_CAMERA
,
683 .gpiomux
= { 0, 0, 0, 0 },
686 .tuner_type
= TUNER_ALPS_TSBB5_PAL_I
,
687 .tuner_addr
= ADDR_UNSET
,
688 .radio_addr
= ADDR_UNSET
,
691 /* ---- card 0x18 ---------------------------------- */
692 [BTTV_BOARD_MAGICTVIEW061
] = {
693 .name
= "Askey CPH05X/06X (bt878) [many vendors]",
699 .muxsel
= { 2, 3, 1, 1 },
700 .gpiomux
= {0x400, 0x400, 0x400, 0x400 },
705 .tuner_addr
= ADDR_UNSET
,
706 .radio_addr
= ADDR_UNSET
,
709 [BTTV_BOARD_VOBIS_BOOSTAR
] = {
710 .name
= "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
715 .gpiomask
= 0x1f0fff,
716 .muxsel
= { 2, 3, 1, 1 },
717 .gpiomux
= { 0x20000, 0x30000, 0x10000, 0 },
720 .tuner_type
= TUNER_PHILIPS_PAL
,
721 .tuner_addr
= ADDR_UNSET
,
722 .radio_addr
= ADDR_UNSET
,
723 .audio_mode_gpio
= terratv_audio
,
725 [BTTV_BOARD_HAUPPAUG_WCAM
] = {
726 .name
= "Hauppauge WinCam newer (bt878)",
732 .muxsel
= { 2, 0, 1, 1 },
733 .gpiomux
= { 0, 1, 2, 3 },
737 .tuner_addr
= ADDR_UNSET
,
738 .radio_addr
= ADDR_UNSET
,
740 [BTTV_BOARD_MAXI
] = {
741 .name
= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
747 .muxsel
= { 2, 3, 1, 1 },
748 .gpiomux
= { 0, 0x800, 0x1000, 0x1000 },
751 .tuner_type
= TUNER_PHILIPS_SECAM
,
752 .tuner_addr
= ADDR_UNSET
,
753 .radio_addr
= ADDR_UNSET
,
756 /* ---- card 0x1c ---------------------------------- */
757 [BTTV_BOARD_TERRATV
] = {
758 .name
= "Terratec TerraTV+ Version 1.1 (bt878)",
763 .gpiomask
= 0x1f0fff,
764 .muxsel
= { 2, 3, 1, 1 },
765 .gpiomux
= { 0x20000, 0x30000, 0x10000, 0x00000 },
768 .tuner_type
= TUNER_PHILIPS_PAL
,
769 .tuner_addr
= ADDR_UNSET
,
770 .radio_addr
= ADDR_UNSET
,
771 .audio_mode_gpio
= terratv_audio
,
773 External 20 pin connector (for Active Radio Upgrade board)
779 gpio05: om5610-stereo
783 gpio09+10: nIOR, nSEL ?? (bt878)
787 gpio16: u2-A0 (1st 4052bt)
790 gpio19: u4-A0 (2nd 4052)
794 00000 : Cdrom (internal audio input)
795 10000 : ext. Video audio input
804 [BTTV_BOARD_PXC200
] = {
805 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
806 .name
= "Imagenation PXC200",
810 .svhs
= 1, /* was: 4 */
812 .muxsel
= { 2, 3, 1, 0, 0},
816 .tuner_addr
= ADDR_UNSET
,
817 .radio_addr
= ADDR_UNSET
,
818 .muxsel_hook
= PXC200_muxsel
,
821 [BTTV_BOARD_FLYVIDEO_98
] = {
822 .name
= "Lifeview FlyVideo 98 LR50",
827 .gpiomask
= 0x1800, /* 0x8dfe00 */
828 .muxsel
= { 2, 3, 1, 1 },
829 .gpiomux
= { 0, 0x0800, 0x1000, 0x1000 },
833 .tuner_addr
= ADDR_UNSET
,
834 .radio_addr
= ADDR_UNSET
,
836 [BTTV_BOARD_IPROTV
] = {
837 .name
= "Formac iProTV, Formac ProTV I (bt848)",
843 .muxsel
= { 2, 3, 1, 1 },
844 .gpiomux
= { 1, 0, 0, 0 },
846 .tuner_type
= TUNER_PHILIPS_PAL
,
847 .tuner_addr
= ADDR_UNSET
,
848 .radio_addr
= ADDR_UNSET
,
851 /* ---- card 0x20 ---------------------------------- */
852 [BTTV_BOARD_INTEL_C_S_PCI
] = {
853 .name
= "Intel Create and Share PCI/ Smart Video Recorder III",
859 .muxsel
= { 2, 3, 1, 1 },
862 .tuner_type
= TUNER_ABSENT
,
863 .tuner_addr
= ADDR_UNSET
,
864 .radio_addr
= ADDR_UNSET
,
866 [BTTV_BOARD_TERRATVALUE
] = {
867 .name
= "Terratec TerraTValue Version Bt878",
872 .gpiomask
= 0xffff00,
873 .muxsel
= { 2, 3, 1, 1 },
874 .gpiomux
= { 0x500, 0, 0x300, 0x900 },
878 .tuner_type
= TUNER_PHILIPS_PAL
,
879 .tuner_addr
= ADDR_UNSET
,
880 .radio_addr
= ADDR_UNSET
,
882 [BTTV_BOARD_WINFAST2000
] = {
883 .name
= "Leadtek WinFast 2000/ WinFast 2000 XP",
888 .muxsel
= { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
889 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
890 .gpiomask
= 0xb33000,
891 .gpiomux
= { 0x122000,0x1000,0x0000,0x620000 },
892 .gpiomute
= 0x800000,
893 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
894 gpio23 -- hef4052:nEnable (0x800000)
897 0x0000: external audio
901 Note: There exists another variant "Winfast 2000" with tv stereo !?
902 Note: eeprom only contains FF and pci subsystem id 107d:6606
907 .tuner_type
= TUNER_PHILIPS_PAL
, /* default for now, gpio reads BFFF06 for Pal bg+dk */
908 .tuner_addr
= ADDR_UNSET
,
909 .radio_addr
= ADDR_UNSET
,
910 .audio_mode_gpio
= winfast2000_audio
,
913 [BTTV_BOARD_CHRONOS_VS2
] = {
914 .name
= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
920 .muxsel
= { 2, 3, 1, 1 },
921 .gpiomux
= { 0, 0x800, 0x1000, 0x1000 },
925 .tuner_addr
= ADDR_UNSET
,
926 .radio_addr
= ADDR_UNSET
,
929 /* ---- card 0x24 ---------------------------------- */
930 [BTTV_BOARD_TYPHOON_TVIEW
] = {
931 .name
= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
937 .muxsel
= { 2, 3, 1, 1 },
938 .gpiomux
= { 0, 0x800, 0x1000, 0x1000 },
942 .tuner_addr
= ADDR_UNSET
,
943 .radio_addr
= ADDR_UNSET
,
946 [BTTV_BOARD_PXELVWPLTVPRO
] = {
947 .name
= "Prolink PixelView PlayTV pro",
953 .muxsel
= { 2, 3, 1, 1 },
954 .gpiomux
= { 0x21, 0x20, 0x24, 0x2c },
959 .tuner_addr
= ADDR_UNSET
,
960 .radio_addr
= ADDR_UNSET
,
962 [BTTV_BOARD_MAGICTVIEW063
] = {
963 .name
= "Askey CPH06X TView99",
968 .gpiomask
= 0x551e00,
969 .muxsel
= { 2, 3, 1, 0 },
970 .gpiomux
= { 0x551400, 0x551200, 0, 0 },
971 .gpiomute
= 0x551c00,
974 .tuner_type
= TUNER_PHILIPS_PAL_I
,
975 .tuner_addr
= ADDR_UNSET
,
976 .radio_addr
= ADDR_UNSET
,
979 [BTTV_BOARD_PINNACLE
] = {
980 .name
= "Pinnacle PCTV Studio/Rave",
985 .gpiomask
= 0x03000F,
986 .muxsel
= { 2, 3, 1, 1 },
987 .gpiomux
= { 2, 0xd0001, 0, 0 },
992 .tuner_addr
= ADDR_UNSET
,
993 .radio_addr
= ADDR_UNSET
,
996 /* ---- card 0x28 ---------------------------------- */
997 [BTTV_BOARD_STB2
] = {
998 .name
= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1004 .muxsel
= { 2, 3, 1, 1 },
1005 .gpiomux
= { 4, 0, 2, 3 },
1009 .tuner_type
= TUNER_PHILIPS_NTSC
,
1010 .tuner_addr
= ADDR_UNSET
,
1011 .radio_addr
= ADDR_UNSET
,
1015 [BTTV_BOARD_AVPHONE98
] = {
1016 .name
= "AVerMedia TVPhone 98",
1022 .muxsel
= { 2, 3, 1, 1 },
1023 .gpiomux
= { 13, 4, 11, 7 },
1026 .tuner_type
= UNSET
,
1027 .tuner_addr
= ADDR_UNSET
,
1028 .radio_addr
= ADDR_UNSET
,
1030 .audio_mode_gpio
= avermedia_tvphone_audio
,
1032 [BTTV_BOARD_PV951
] = {
1033 .name
= "ProVideo PV951", /* pic16c54 */
1039 .muxsel
= { 2, 3, 1, 1},
1040 .gpiomux
= { 0, 0, 0, 0},
1044 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1045 .tuner_addr
= ADDR_UNSET
,
1046 .radio_addr
= ADDR_UNSET
,
1048 [BTTV_BOARD_ONAIR_TV
] = {
1049 .name
= "Little OnAir TV",
1055 .muxsel
= { 2, 3, 1, 1 },
1056 .gpiomux
= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1057 .gpiomute
= 0xff3ffc,
1059 .tuner_type
= UNSET
,
1060 .tuner_addr
= ADDR_UNSET
,
1061 .radio_addr
= ADDR_UNSET
,
1064 /* ---- card 0x2c ---------------------------------- */
1065 [BTTV_BOARD_SIGMA_TVII_FM
] = {
1066 .name
= "Sigma TVII-FM",
1072 .muxsel
= { 2, 3, 1, 1 },
1073 .gpiomux
= { 1, 1, 0, 2 },
1077 .tuner_type
= UNSET
,
1078 .tuner_addr
= ADDR_UNSET
,
1079 .radio_addr
= ADDR_UNSET
,
1081 [BTTV_BOARD_MATRIX_VISION2
] = {
1082 .name
= "MATRIX-Vision MV-Delta 2",
1088 .muxsel
= { 2, 3, 1, 0, 0 },
1092 .tuner_type
= UNSET
,
1093 .tuner_addr
= ADDR_UNSET
,
1094 .radio_addr
= ADDR_UNSET
,
1096 [BTTV_BOARD_ZOLTRIX_GENIE
] = {
1097 .name
= "Zoltrix Genie TV/FM",
1102 .gpiomask
= 0xbcf03f,
1103 .muxsel
= { 2, 3, 1, 1 },
1104 .gpiomux
= { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1105 .gpiomute
= 0xbcb03f,
1108 .tuner_type
= TUNER_TEMIC_4039FR5_NTSC
,
1109 .tuner_addr
= ADDR_UNSET
,
1110 .radio_addr
= ADDR_UNSET
,
1112 [BTTV_BOARD_TERRATVRADIO
] = {
1113 .name
= "Terratec TV/Radio+",
1118 .gpiomask
= 0x70000,
1119 .muxsel
= { 2, 3, 1, 1 },
1120 .gpiomux
= { 0x20000, 0x30000, 0x10000, 0 },
1121 .gpiomute
= 0x40000,
1125 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1126 .tuner_addr
= ADDR_UNSET
,
1127 .radio_addr
= ADDR_UNSET
,
1131 /* ---- card 0x30 ---------------------------------- */
1132 [BTTV_BOARD_DYNALINK
] = {
1133 .name
= "Askey CPH03x/ Dynalink Magic TView",
1139 .muxsel
= { 2, 3, 1, 1 },
1140 .gpiomux
= {2,0,0,0 },
1144 .tuner_type
= UNSET
,
1145 .tuner_addr
= ADDR_UNSET
,
1146 .radio_addr
= ADDR_UNSET
,
1148 [BTTV_BOARD_GVBCTV3PCI
] = {
1149 .name
= "IODATA GV-BCTV3/PCI",
1154 .gpiomask
= 0x010f00,
1155 .muxsel
= {2, 3, 0, 0 },
1156 .gpiomux
= {0x10000, 0, 0x10000, 0 },
1159 .tuner_type
= TUNER_ALPS_TSHC6_NTSC
,
1160 .tuner_addr
= ADDR_UNSET
,
1161 .radio_addr
= ADDR_UNSET
,
1162 .audio_mode_gpio
= gvbctv3pci_audio
,
1164 [BTTV_BOARD_PXELVWPLTVPAK
] = {
1165 .name
= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1170 .gpiomask
= 0xAA0000,
1171 .muxsel
= { 2,3,1,1,-1 },
1172 .digital_mode
= DIGITAL_MODE_CAMERA
,
1173 .gpiomux
= { 0x20000, 0, 0x80000, 0x80000 },
1174 .gpiomute
= 0xa8000,
1177 .tuner_type
= TUNER_PHILIPS_PAL_I
,
1178 .tuner_addr
= ADDR_UNSET
,
1179 .radio_addr
= ADDR_UNSET
,
1181 /* GPIO wiring: (different from Rev.4C !)
1182 GPIO17: U4.A0 (first hef4052bt)
1184 GPIO20: U5.A1 (second hef4052bt)
1186 GPIO22: BT832 Reset Line
1187 GPIO23: A5,A0, U5,nEN
1188 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1191 [BTTV_BOARD_EAGLE
] = {
1192 .name
= "Eagle Wireless Capricorn2 (bt878A)",
1198 .muxsel
= { 2, 0, 1, 1 },
1199 .gpiomux
= { 0, 1, 2, 3 },
1202 .tuner_type
= UNSET
/* TUNER_ALPS_TMDH2_NTSC */,
1203 .tuner_addr
= ADDR_UNSET
,
1204 .radio_addr
= ADDR_UNSET
,
1207 /* ---- card 0x34 ---------------------------------- */
1208 [BTTV_BOARD_PINNACLEPRO
] = {
1209 /* David Härdeman <david@2gen.com> */
1210 .name
= "Pinnacle PCTV Studio Pro",
1215 .gpiomask
= 0x03000F,
1216 .muxsel
= { 2, 3, 1, 1 },
1217 .gpiomux
= { 1, 0xd0001, 0, 0 },
1219 /* sound path (5 sources):
1220 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1223 2= Mono TV sound from Tuner
1225 MUX2 (mask 0x30000):
1227 1= FM stereo Radio from Tuner */
1230 .tuner_type
= UNSET
,
1231 .tuner_addr
= ADDR_UNSET
,
1232 .radio_addr
= ADDR_UNSET
,
1234 [BTTV_BOARD_TVIEW_RDS_FM
] = {
1235 /* Claas Langbehn <claas@bigfoot.com>,
1236 Sven Grothklags <sven@upb.de> */
1237 .name
= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1243 .muxsel
= { 2, 3, 1, 1 },
1244 .gpiomux
= { 0, 0, 0x10, 8 },
1248 .tuner_type
= TUNER_PHILIPS_PAL
,
1249 .tuner_addr
= ADDR_UNSET
,
1250 .radio_addr
= ADDR_UNSET
,
1253 [BTTV_BOARD_LIFETEC_9415
] = {
1254 /* Tim Röstermundt <rosterm@uni-muenster.de>
1255 in de.comp.os.unix.linux.hardware:
1256 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1257 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1258 options tuner type=5 */
1259 .name
= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1265 .muxsel
= { 2, 3, 1, 1 },
1266 .gpiomux
= { 0x0000,0x0800,0x1000,0x1000 },
1268 /* For cards with tda9820/tda9821:
1269 0x0000: Tuner normal stereo
1270 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1271 0x0880: Tuner A2 stereo */
1273 .tuner_type
= UNSET
,
1274 .tuner_addr
= ADDR_UNSET
,
1275 .radio_addr
= ADDR_UNSET
,
1277 [BTTV_BOARD_BESTBUY_EASYTV
] = {
1278 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1279 old Easy TV BT848 version (model CPH031) */
1280 .name
= "Askey CPH031/ BESTBUY Easy TV",
1286 .muxsel
= { 2, 3, 1, 0 },
1287 .gpiomux
= { 2, 0, 0, 0 },
1291 .tuner_type
= TUNER_TEMIC_PAL
,
1292 .tuner_addr
= ADDR_UNSET
,
1293 .radio_addr
= ADDR_UNSET
,
1296 /* ---- card 0x38 ---------------------------------- */
1297 [BTTV_BOARD_FLYVIDEO_98FM
] = {
1298 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1299 .name
= "Lifeview FlyVideo 98FM LR50",
1305 .muxsel
= { 2, 3, 1, 1 },
1306 .gpiomux
= { 0, 0x800, 0x1000, 0x1000 },
1309 .tuner_type
= TUNER_PHILIPS_PAL
,
1310 .tuner_addr
= ADDR_UNSET
,
1311 .radio_addr
= ADDR_UNSET
,
1313 /* This is the ultimate cheapo capture card
1314 * just a BT848A on a small PCB!
1315 * Steve Hosgood <steve@equiinet.com> */
1316 [BTTV_BOARD_GRANDTEC
] = {
1317 .name
= "GrandTec 'Grand Video Capture' (Bt848)",
1328 .tuner_type
= UNSET
,
1329 .tuner_addr
= ADDR_UNSET
,
1330 .radio_addr
= ADDR_UNSET
,
1332 [BTTV_BOARD_ASKEY_CPH060
] = {
1333 /* Daniel Herrington <daniel.herrington@home.com> */
1334 .name
= "Askey CPH060/ Phoebe TV Master Only (No FM)",
1340 .muxsel
= { 2, 3, 1, 1},
1341 .gpiomux
= { 0x400, 0x400, 0x400, 0x400 },
1345 .tuner_type
= TUNER_TEMIC_4036FY5_NTSC
,
1346 .tuner_addr
= ADDR_UNSET
,
1347 .radio_addr
= ADDR_UNSET
,
1349 [BTTV_BOARD_ASKEY_CPH03X
] = {
1350 /* Matti Mottus <mottus@physic.ut.ee> */
1351 .name
= "Askey CPH03x TV Capturer",
1356 .gpiomask
= 0x03000F,
1357 .muxsel
= { 2, 3, 1, 0 },
1358 .gpiomux
= { 2, 0, 0, 0 },
1361 .tuner_type
= TUNER_TEMIC_PAL
,
1362 .tuner_addr
= ADDR_UNSET
,
1363 .radio_addr
= ADDR_UNSET
,
1366 /* ---- card 0x3c ---------------------------------- */
1367 [BTTV_BOARD_MM100PCTV
] = {
1368 /* Philip Blundell <philb@gnu.org> */
1369 .name
= "Modular Technology MM100PCTV",
1375 .muxsel
= { 2, 3, 1, 1 },
1376 .gpiomux
= { 2, 0, 0, 1 },
1379 .tuner_type
= TUNER_TEMIC_PAL
,
1380 .tuner_addr
= ADDR_UNSET
,
1381 .radio_addr
= ADDR_UNSET
,
1383 [BTTV_BOARD_GMV1
] = {
1384 /* Adrian Cox <adrian@humboldt.co.uk */
1385 .name
= "AG Electronics GMV1",
1396 .tuner_type
= UNSET
,
1397 .tuner_addr
= ADDR_UNSET
,
1398 .radio_addr
= ADDR_UNSET
,
1400 [BTTV_BOARD_BESTBUY_EASYTV2
] = {
1401 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1402 new Easy TV BT878 version (model CPH061)
1403 special thanks to Informatica Mieres for providing the card */
1404 .name
= "Askey CPH061/ BESTBUY Easy TV (bt878)",
1410 .muxsel
= { 2, 3, 1, 0 },
1411 .gpiomux
= { 1, 0, 4, 4 },
1415 .tuner_type
= TUNER_PHILIPS_PAL
,
1416 .tuner_addr
= ADDR_UNSET
,
1417 .radio_addr
= ADDR_UNSET
,
1419 [BTTV_BOARD_ATI_TVWONDER
] = {
1420 /* Lukas Gebauer <geby@volny.cz> */
1421 .name
= "ATI TV-Wonder",
1427 .muxsel
= { 2, 3, 1, 0 },
1428 .gpiomux
= { 0xbffe, 0, 0xbfff, 0 },
1431 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1432 .tuner_addr
= ADDR_UNSET
,
1433 .radio_addr
= ADDR_UNSET
,
1436 /* ---- card 0x40 ---------------------------------- */
1437 [BTTV_BOARD_ATI_TVWONDERVE
] = {
1438 /* Lukas Gebauer <geby@volny.cz> */
1439 .name
= "ATI TV-Wonder VE",
1445 .muxsel
= { 2, 3, 0, 1 },
1446 .gpiomux
= { 0, 0, 1, 0 },
1449 .tuner_type
= TUNER_TEMIC_4006FN5_MULTI_PAL
,
1450 .tuner_addr
= ADDR_UNSET
,
1451 .radio_addr
= ADDR_UNSET
,
1453 [BTTV_BOARD_FLYVIDEO2000
] = {
1454 /* DeeJay <deejay@westel900.net (2000S) */
1455 .name
= "Lifeview FlyVideo 2000S LR90",
1461 .muxsel
= { 2, 3, 0, 1 },
1462 /* Radio changed from 1e80 to 0x800 to make
1463 FlyVideo2000S in .hu happy (gm)*/
1464 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1465 .gpiomux
= { 0x0000,0x0800,0x1000,0x1000 },
1467 .audio_mode_gpio
= fv2000s_audio
,
1472 .tuner_type
= TUNER_PHILIPS_PAL
,
1473 .tuner_addr
= ADDR_UNSET
,
1474 .radio_addr
= ADDR_UNSET
,
1476 [BTTV_BOARD_TERRATVALUER
] = {
1477 .name
= "Terratec TValueRadio",
1482 .gpiomask
= 0xffff00,
1483 .muxsel
= { 2, 3, 1, 1 },
1484 .gpiomux
= { 0x500, 0x500, 0x300, 0x900 },
1488 .tuner_type
= TUNER_PHILIPS_PAL
,
1489 .tuner_addr
= ADDR_UNSET
,
1490 .radio_addr
= ADDR_UNSET
,
1493 [BTTV_BOARD_GVBCTV4PCI
] = {
1494 /* TANAKA Kei <peg00625@nifty.com> */
1495 .name
= "IODATA GV-BCTV4/PCI",
1500 .gpiomask
= 0x010f00,
1501 .muxsel
= {2, 3, 0, 0 },
1502 .gpiomux
= {0x10000, 0, 0x10000, 0 },
1505 .tuner_type
= TUNER_SHARP_2U5JF5540_NTSC
,
1506 .tuner_addr
= ADDR_UNSET
,
1507 .radio_addr
= ADDR_UNSET
,
1508 .audio_mode_gpio
= gvbctv3pci_audio
,
1511 /* ---- card 0x44 ---------------------------------- */
1512 [BTTV_BOARD_VOODOOTV_FM
] = {
1513 .name
= "3Dfx VoodooTV FM (Euro)",
1514 /* try "insmod msp3400 simple=0" if you have
1515 * sound problems with this card. */
1520 .gpiomask
= 0x4f8a00,
1521 /* 0x100000: 1=MSP enabled (0=disable again)
1522 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1523 .gpiomux
= {0x947fff, 0x987fff,0x947fff,0x947fff },
1524 .gpiomute
= 0x947fff,
1525 /* tvtuner, radio, external,internal, mute, stereo
1526 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1527 .muxsel
= { 2, 3 ,0 ,1 },
1528 .tuner_type
= TUNER_MT2032
,
1529 .tuner_addr
= ADDR_UNSET
,
1530 .radio_addr
= ADDR_UNSET
,
1534 [BTTV_BOARD_VOODOOTV_200
] = {
1535 .name
= "VoodooTV 200 (USA)",
1536 /* try "insmod msp3400 simple=0" if you have
1537 * sound problems with this card. */
1542 .gpiomask
= 0x4f8a00,
1543 /* 0x100000: 1=MSP enabled (0=disable again)
1544 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1545 .gpiomux
= {0x947fff, 0x987fff,0x947fff,0x947fff },
1546 .gpiomute
= 0x947fff,
1547 /* tvtuner, radio, external,internal, mute, stereo
1548 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1549 .muxsel
= { 2, 3 ,0 ,1 },
1550 .tuner_type
= TUNER_MT2032
,
1551 .tuner_addr
= ADDR_UNSET
,
1552 .radio_addr
= ADDR_UNSET
,
1556 [BTTV_BOARD_AIMMS
] = {
1557 /* Philip Blundell <pb@nexus.co.uk> */
1558 .name
= "Active Imaging AIMMS",
1562 .tuner_type
= UNSET
,
1563 .tuner_addr
= ADDR_UNSET
,
1564 .radio_addr
= ADDR_UNSET
,
1569 [BTTV_BOARD_PV_BT878P_PLUS
] = {
1570 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1571 .name
= "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1577 .muxsel
= { 2, 3, 1, 1 },
1578 .gpiomux
= { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1582 .tuner_type
= TUNER_LG_PAL_I_FM
,
1583 .tuner_addr
= ADDR_UNSET
,
1584 .radio_addr
= ADDR_UNSET
,
1587 GPIO0: U4.A0 (hef4052bt)
1589 GPIO2: U4.A1 (second hef4052bt)
1590 GPIO3: U4.nEN, U5.A0, A5.nEN
1594 [BTTV_BOARD_FLYVIDEO98EZ
] = {
1595 .name
= "Lifeview FlyVideo 98EZ (capture only) LR51",
1600 .muxsel
= { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1603 .tuner_type
= UNSET
,
1604 .tuner_addr
= ADDR_UNSET
,
1605 .radio_addr
= ADDR_UNSET
,
1608 /* ---- card 0x48 ---------------------------------- */
1609 [BTTV_BOARD_PV_BT878P_9B
] = {
1610 /* Dariusz Kowalewski <darekk@automex.pl> */
1611 .name
= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1617 .muxsel
= { 2, 3, 1, 1 },
1618 .gpiomux
= { 0x01, 0x00, 0x03, 0x03 },
1624 .tuner_type
= TUNER_PHILIPS_PAL
,
1625 .tuner_addr
= ADDR_UNSET
,
1626 .radio_addr
= ADDR_UNSET
,
1627 .audio_mode_gpio
= pvbt878p9b_audio
, /* Note: not all cards have stereo */
1628 .has_radio
= 1, /* Note: not all cards have radio */
1635 GPIO20,22,23: R30,R29,R28
1638 [BTTV_BOARD_SENSORAY311
] = {
1639 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1640 /* you must jumper JP5 for the card to work */
1641 .name
= "Sensoray 311",
1647 .muxsel
= { 2, 3, 1, 0, 0 },
1650 .tuner_type
= UNSET
,
1651 .tuner_addr
= ADDR_UNSET
,
1652 .radio_addr
= ADDR_UNSET
,
1654 [BTTV_BOARD_RV605
] = {
1655 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1656 .name
= "RemoteVision MX (RV605)",
1662 .gpiomask2
= 0x07ff,
1663 .muxsel
= { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1664 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1667 .tuner_type
= UNSET
,
1668 .tuner_addr
= ADDR_UNSET
,
1669 .radio_addr
= ADDR_UNSET
,
1670 .muxsel_hook
= rv605_muxsel
,
1672 [BTTV_BOARD_POWERCLR_MTV878
] = {
1673 .name
= "Powercolor MTV878/ MTV878R/ MTV878F",
1678 .gpiomask
= 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1679 .muxsel
= { 2, 1, 1, },
1680 .gpiomux
= { 0, 1, 2, 2 },
1683 .tuner_type
= TUNER_PHILIPS_PAL
,
1684 .tuner_addr
= ADDR_UNSET
,
1685 .radio_addr
= ADDR_UNSET
,
1690 /* ---- card 0x4c ---------------------------------- */
1691 [BTTV_BOARD_WINDVR
] = {
1692 /* Masaki Suzuki <masaki@btree.org> */
1693 .name
= "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1698 .gpiomask
= 0x140007,
1699 .muxsel
= { 2, 3, 1, 1 },
1700 .gpiomux
= { 0, 1, 2, 3 },
1702 .tuner_type
= TUNER_PHILIPS_NTSC
,
1703 .tuner_addr
= ADDR_UNSET
,
1704 .radio_addr
= ADDR_UNSET
,
1705 .audio_mode_gpio
= windvr_audio
,
1707 [BTTV_BOARD_GRANDTEC_MULTI
] = {
1708 .name
= "GrandTec Multi Capture Card (Bt878)",
1714 .muxsel
= { 2, 3, 1, 0 },
1719 .tuner_type
= UNSET
,
1720 .tuner_addr
= ADDR_UNSET
,
1721 .radio_addr
= ADDR_UNSET
,
1723 [BTTV_BOARD_KWORLD
] = {
1724 .name
= "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1730 .muxsel
= { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1731 .gpiomux
= { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1732 * This card lacks external Audio In, so we mute it on Ext. & Int.
1733 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1734 * This card lacks PCI subsystem ID, sigh.
1735 * gpiomux =1: lower volume, 2+3: mute
1736 * btwincap uses 0x80000/0x80003
1742 .tuner_type
= TUNER_PHILIPS_PAL
,
1743 .tuner_addr
= ADDR_UNSET
,
1744 .radio_addr
= ADDR_UNSET
,
1745 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1746 radio signal strength indicators work fine. */
1749 GPIO0,1: HEF4052 A0,A1
1750 GPIO2: HEF4052 nENABLE
1752 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1756 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1758 [BTTV_BOARD_DSP_TCVIDEO
] = {
1759 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1760 .name
= "DSP Design TCVIDEO",
1763 .muxsel
= { 2, 3, 1, 0 },
1765 .tuner_type
= UNSET
,
1766 .tuner_addr
= ADDR_UNSET
,
1767 .radio_addr
= ADDR_UNSET
,
1770 /* ---- card 0x50 ---------------------------------- */
1771 [BTTV_BOARD_HAUPPAUGEPVR
] = {
1772 .name
= "Hauppauge WinTV PVR",
1777 .muxsel
= { 2, 0, 1, 1 },
1780 .tuner_type
= UNSET
,
1781 .tuner_addr
= ADDR_UNSET
,
1782 .radio_addr
= ADDR_UNSET
,
1787 [BTTV_BOARD_GVBCTV5PCI
] = {
1788 .name
= "IODATA GV-BCTV5/PCI",
1793 .gpiomask
= 0x0f0f80,
1794 .muxsel
= {2, 3, 1, 0 },
1795 .gpiomux
= {0x030000, 0x010000, 0, 0 },
1796 .gpiomute
= 0x020000,
1799 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
1800 .tuner_addr
= ADDR_UNSET
,
1801 .radio_addr
= ADDR_UNSET
,
1802 .audio_mode_gpio
= gvbctv5pci_audio
,
1805 [BTTV_BOARD_OSPREY1x0
] = {
1806 .name
= "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1807 .video_inputs
= 4, /* id-inputs-clock */
1811 .muxsel
= { 3, 2, 0, 1 },
1813 .tuner_type
= UNSET
,
1814 .tuner_addr
= ADDR_UNSET
,
1815 .radio_addr
= ADDR_UNSET
,
1820 [BTTV_BOARD_OSPREY1x0_848
] = {
1821 .name
= "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1826 .muxsel
= { 2, 3, 1 },
1828 .tuner_type
= UNSET
,
1829 .tuner_addr
= ADDR_UNSET
,
1830 .radio_addr
= ADDR_UNSET
,
1836 /* ---- card 0x54 ---------------------------------- */
1837 [BTTV_BOARD_OSPREY101_848
] = {
1838 .name
= "Osprey 101 (848)", /* 0x05-40C0-C1 */
1845 .tuner_type
= UNSET
,
1846 .tuner_addr
= ADDR_UNSET
,
1847 .radio_addr
= ADDR_UNSET
,
1852 [BTTV_BOARD_OSPREY1x1
] = {
1853 .name
= "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1860 .tuner_type
= UNSET
,
1861 .tuner_addr
= ADDR_UNSET
,
1862 .radio_addr
= ADDR_UNSET
,
1867 [BTTV_BOARD_OSPREY1x1_SVID
] = {
1868 .name
= "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1875 .tuner_type
= UNSET
,
1876 .tuner_addr
= ADDR_UNSET
,
1877 .radio_addr
= ADDR_UNSET
,
1882 [BTTV_BOARD_OSPREY2xx
] = {
1883 .name
= "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1890 .tuner_type
= UNSET
,
1891 .tuner_addr
= ADDR_UNSET
,
1892 .radio_addr
= ADDR_UNSET
,
1898 /* ---- card 0x58 ---------------------------------- */
1899 [BTTV_BOARD_OSPREY2x0_SVID
] = {
1900 .name
= "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1907 .tuner_type
= UNSET
,
1908 .tuner_addr
= ADDR_UNSET
,
1909 .radio_addr
= ADDR_UNSET
,
1914 [BTTV_BOARD_OSPREY2x0
] = {
1915 .name
= "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1922 .tuner_type
= UNSET
,
1923 .tuner_addr
= ADDR_UNSET
,
1924 .radio_addr
= ADDR_UNSET
,
1929 [BTTV_BOARD_OSPREY500
] = {
1930 .name
= "Osprey 500", /* 500 */
1937 .tuner_type
= UNSET
,
1938 .tuner_addr
= ADDR_UNSET
,
1939 .radio_addr
= ADDR_UNSET
,
1944 [BTTV_BOARD_OSPREY540
] = {
1945 .name
= "Osprey 540", /* 540 */
1950 .tuner_type
= UNSET
,
1951 .tuner_addr
= ADDR_UNSET
,
1952 .radio_addr
= ADDR_UNSET
,
1958 /* ---- card 0x5C ---------------------------------- */
1959 [BTTV_BOARD_OSPREY2000
] = {
1960 .name
= "Osprey 2000", /* 2000 */
1967 .tuner_type
= UNSET
,
1968 .tuner_addr
= ADDR_UNSET
,
1969 .radio_addr
= ADDR_UNSET
,
1972 .no_tda7432
= 1, /* must avoid, conflicts with the bt860 */
1974 [BTTV_BOARD_IDS_EAGLE
] = {
1975 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1976 .name
= "IDS Eagle",
1980 .tuner_type
= UNSET
,
1981 .tuner_addr
= ADDR_UNSET
,
1982 .radio_addr
= ADDR_UNSET
,
1985 .muxsel
= { 0, 1, 2, 3 },
1986 .muxsel_hook
= eagle_muxsel
,
1991 [BTTV_BOARD_PINNACLESAT
] = {
1992 .name
= "Pinnacle PCTV Sat",
1997 .tuner_type
= UNSET
,
1998 .tuner_addr
= ADDR_UNSET
,
1999 .radio_addr
= ADDR_UNSET
,
2008 [BTTV_BOARD_FORMAC_PROTV
] = {
2009 .name
= "Formac ProTV II (bt878)",
2015 /* TV, Comp1, Composite over SVID con, SVID */
2016 .muxsel
= { 2, 3, 1, 1 },
2017 .gpiomux
= { 2, 2, 0, 0 },
2020 .tuner_type
= TUNER_PHILIPS_PAL
,
2021 .tuner_addr
= ADDR_UNSET
,
2022 .radio_addr
= ADDR_UNSET
,
2024 GPIO=0x00,0x01,0x03: mute (?)
2025 0x02: both TV and radio (tuner: FM1216/I)
2026 The card has onboard audio connectors labeled "cdrom" and "board",
2027 not soldered here, though unknown wiring.
2028 Card lacks: external audio in, pci subsystem id.
2032 /* ---- card 0x60 ---------------------------------- */
2033 [BTTV_BOARD_MACHTV
] = {
2040 .muxsel
= { 2, 3, 1, 1},
2041 .gpiomux
= { 0, 1, 2, 3},
2044 .tuner_type
= TUNER_PHILIPS_PAL
,
2045 .tuner_addr
= ADDR_UNSET
,
2046 .radio_addr
= ADDR_UNSET
,
2049 [BTTV_BOARD_EURESYS_PICOLO
] = {
2050 .name
= "Euresys Picolo",
2059 .muxsel
= { 2, 0, 1},
2061 .tuner_type
= UNSET
,
2062 .tuner_addr
= ADDR_UNSET
,
2063 .radio_addr
= ADDR_UNSET
,
2065 [BTTV_BOARD_PV150
] = {
2066 /* Luc Van Hoeylandt <luc@e-magic.be> */
2067 .name
= "ProVideo PV150", /* 0x4f */
2078 .tuner_type
= UNSET
,
2079 .tuner_addr
= ADDR_UNSET
,
2080 .radio_addr
= ADDR_UNSET
,
2082 [BTTV_BOARD_AD_TVK503
] = {
2083 /* Hiroshi Takekawa <sian@big.or.jp> */
2084 /* This card lacks subsystem ID */
2085 .name
= "AD-TVK503", /* 0x63 */
2090 .gpiomask
= 0x001e8007,
2091 .muxsel
= { 2, 3, 1, 0 },
2092 /* Tuner, Radio, external, internal, off, on */
2093 .gpiomux
= { 0x08, 0x0f, 0x0a, 0x08 },
2098 .tuner_type
= TUNER_PHILIPS_NTSC
,
2099 .tuner_addr
= ADDR_UNSET
,
2100 .radio_addr
= ADDR_UNSET
,
2101 .audio_mode_gpio
= adtvk503_audio
,
2104 /* ---- card 0x64 ---------------------------------- */
2105 [BTTV_BOARD_HERCULES_SM_TV
] = {
2106 .name
= "Hercules Smart TV Stereo",
2112 .muxsel
= { 2, 3, 1, 1 },
2116 .tuner_type
= TUNER_PHILIPS_PAL
,
2117 .tuner_addr
= ADDR_UNSET
,
2118 .radio_addr
= ADDR_UNSET
,
2120 - card lacks subsystem ID
2121 - stereo variant w/ daughter board with tda9874a @0xb0
2123 always from tda9874 independent of GPIO (?)
2124 external line in: unknown
2125 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2126 hef4053 (instead 4052) for unknown function
2129 [BTTV_BOARD_PACETV
] = {
2130 .name
= "Pace TV & Radio Card",
2135 .muxsel
= { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2139 .tuner_type
= TUNER_PHILIPS_PAL_I
,
2140 .tuner_addr
= ADDR_UNSET
,
2141 .radio_addr
= ADDR_UNSET
,
2144 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2145 only internal line out: (4pin header) RGGL
2146 Radio must be decoded by msp3410d (not routed through)*/
2148 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2151 [BTTV_BOARD_IVC200
] = {
2152 /* Chris Willing <chris@vislab.usyd.edu.au> */
2157 .tuner_type
= UNSET
,
2158 .tuner_addr
= ADDR_UNSET
,
2159 .radio_addr
= ADDR_UNSET
,
2165 [BTTV_BOARD_XGUARD
] = {
2166 .name
= "Grand X-Guard / Trust 814PCI",
2171 .tuner_type
= TUNER_ABSENT
,
2172 .tuner_addr
= ADDR_UNSET
,
2173 .radio_addr
= ADDR_UNSET
,
2175 .muxsel
= { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2176 .muxsel_hook
= xguard_muxsel
,
2183 /* ---- card 0x68 ---------------------------------- */
2184 [BTTV_BOARD_NEBULA_DIGITV
] = {
2185 .name
= "Nebula Electronics DigiTV",
2189 .muxsel
= { 2, 3, 1, 0 },
2194 .tuner_type
= UNSET
,
2195 .tuner_addr
= ADDR_UNSET
,
2196 .radio_addr
= ADDR_UNSET
,
2202 [BTTV_BOARD_PV143
] = {
2203 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2204 .name
= "ProVideo PV143",
2210 .muxsel
= { 2, 3, 1, 0 },
2215 .tuner_type
= UNSET
,
2216 .tuner_addr
= ADDR_UNSET
,
2217 .radio_addr
= ADDR_UNSET
,
2219 [BTTV_BOARD_VD009X1_MINIDIN
] = {
2220 /* M.Klahr@phytec.de */
2221 .name
= "PHYTEC VD-009-X1 MiniDIN (bt878)",
2224 .tuner
= UNSET
, /* card has no tuner */
2227 .muxsel
= { 2, 3, 1, 0 },
2228 .gpiomux
= { 0, 0, 0, 0 }, /* card has no audio */
2231 .tuner_type
= UNSET
,
2232 .tuner_addr
= ADDR_UNSET
,
2233 .radio_addr
= ADDR_UNSET
,
2235 [BTTV_BOARD_VD009X1_COMBI
] = {
2236 .name
= "PHYTEC VD-009-X1 Combi (bt878)",
2239 .tuner
= UNSET
, /* card has no tuner */
2242 .muxsel
= { 2, 3, 1, 1 },
2243 .gpiomux
= { 0, 0, 0, 0 }, /* card has no audio */
2246 .tuner_type
= UNSET
,
2247 .tuner_addr
= ADDR_UNSET
,
2248 .radio_addr
= ADDR_UNSET
,
2251 /* ---- card 0x6c ---------------------------------- */
2252 [BTTV_BOARD_VD009_MINIDIN
] = {
2253 .name
= "PHYTEC VD-009 MiniDIN (bt878)",
2256 .tuner
= UNSET
, /* card has no tuner */
2259 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2260 via the upper nibble of muxsel. here: used for
2261 xternal video-mux */
2262 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2263 .gpiomux
= { 0, 0, 0, 0 }, /* card has no audio */
2266 .tuner_type
= UNSET
,
2267 .tuner_addr
= ADDR_UNSET
,
2268 .radio_addr
= ADDR_UNSET
,
2270 [BTTV_BOARD_VD009_COMBI
] = {
2271 .name
= "PHYTEC VD-009 Combi (bt878)",
2274 .tuner
= UNSET
, /* card has no tuner */
2277 .gpiomask2
= 0x03, /* gpiomask2 defines the bits used to switch audio
2278 via the upper nibble of muxsel. here: used for
2279 xternal video-mux */
2280 .muxsel
= { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2281 .gpiomux
= { 0, 0, 0, 0 }, /* card has no audio */
2284 .tuner_type
= UNSET
,
2285 .tuner_addr
= ADDR_UNSET
,
2286 .radio_addr
= ADDR_UNSET
,
2288 [BTTV_BOARD_IVC100
] = {
2293 .tuner_type
= UNSET
,
2294 .tuner_addr
= ADDR_UNSET
,
2295 .radio_addr
= ADDR_UNSET
,
2298 .muxsel
= { 2, 3, 1, 0 },
2301 [BTTV_BOARD_IVC120
] = {
2302 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2305 .audio_inputs
= 0, /* card has no audio */
2306 .tuner
= UNSET
, /* card has no tuner */
2307 .tuner_type
= UNSET
,
2308 .tuner_addr
= ADDR_UNSET
,
2309 .radio_addr
= ADDR_UNSET
,
2310 .svhs
= UNSET
, /* card has no svhs */
2316 .muxsel
= { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2317 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2318 .muxsel_hook
= ivc120_muxsel
,
2322 /* ---- card 0x70 ---------------------------------- */
2323 [BTTV_BOARD_PC_HDTV
] = {
2324 .name
= "pcHDTV HD-2000 TV",
2329 .muxsel
= { 2, 3, 1, 0 },
2330 .tuner_type
= TUNER_PHILIPS_FCV1236D
,
2331 .tuner_addr
= ADDR_UNSET
,
2332 .radio_addr
= ADDR_UNSET
,
2335 [BTTV_BOARD_TWINHAN_DST
] = {
2336 .name
= "Twinhan DST + clones",
2340 .tuner_type
= TUNER_ABSENT
,
2341 .tuner_addr
= ADDR_UNSET
,
2342 .radio_addr
= ADDR_UNSET
,
2346 [BTTV_BOARD_WINFASTVC100
] = {
2347 .name
= "Winfast VC100",
2352 .muxsel
= { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2356 .tuner_type
= TUNER_ABSENT
,
2357 .tuner_addr
= ADDR_UNSET
,
2358 .radio_addr
= ADDR_UNSET
,
2361 [BTTV_BOARD_TEV560
] = {
2362 .name
= "Teppro TEV-560/InterVision IV-560",
2368 .muxsel
= { 2, 3, 1, 1 },
2369 .gpiomux
= { 1, 1, 1, 1 },
2371 .tuner_type
= TUNER_PHILIPS_PAL
,
2372 .tuner_addr
= ADDR_UNSET
,
2373 .radio_addr
= ADDR_UNSET
,
2377 /* ---- card 0x74 ---------------------------------- */
2378 [BTTV_BOARD_SIMUS_GVC1100
] = {
2379 .name
= "SIMUS GVC1100",
2384 .tuner_type
= UNSET
,
2385 .tuner_addr
= ADDR_UNSET
,
2386 .radio_addr
= ADDR_UNSET
,
2388 .muxsel
= { 2, 2, 2, 2 },
2390 .muxsel_hook
= gvc1100_muxsel
,
2392 [BTTV_BOARD_NGSTV_PLUS
] = {
2393 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2394 .name
= "NGS NGSTV+",
2398 .gpiomask
= 0x008007,
2399 .muxsel
= { 2, 3, 0, 0 },
2400 .gpiomux
= { 0, 0, 0, 0 },
2401 .gpiomute
= 0x000003,
2403 .tuner_type
= TUNER_PHILIPS_PAL
,
2404 .tuner_addr
= ADDR_UNSET
,
2405 .radio_addr
= ADDR_UNSET
,
2408 [BTTV_BOARD_LMLBT4
] = {
2409 /* http://linuxmedialabs.com */
2411 .video_inputs
= 4, /* IN1,IN2,IN3,IN4 */
2415 .muxsel
= { 2, 3, 1, 0 },
2420 .tuner_type
= UNSET
,
2421 .tuner_addr
= ADDR_UNSET
,
2422 .radio_addr
= ADDR_UNSET
,
2424 [BTTV_BOARD_TEKRAM_M205
] = {
2425 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2426 .name
= "Tekram M205 PRO",
2430 .tuner_type
= TUNER_PHILIPS_PAL
,
2431 .tuner_addr
= ADDR_UNSET
,
2432 .radio_addr
= ADDR_UNSET
,
2436 .muxsel
= { 2, 3, 1 },
2437 .gpiomux
= { 0x68, 0x68, 0x61, 0x61 },
2441 /* ---- card 0x78 ---------------------------------- */
2442 [BTTV_BOARD_CONTVFMI
] = {
2443 /* Javier Cendan Ares <jcendan@lycos.es> */
2444 /* bt878 TV + FM without subsystem ID */
2445 .name
= "Conceptronic CONTVFMi",
2450 .gpiomask
= 0x008007,
2451 .muxsel
= { 2, 3, 1, 1 },
2452 .gpiomux
= { 0, 1, 2, 2 },
2456 .tuner_type
= TUNER_PHILIPS_PAL
,
2457 .tuner_addr
= ADDR_UNSET
,
2458 .radio_addr
= ADDR_UNSET
,
2462 [BTTV_BOARD_PICOLO_TETRA_CHIP
] = {
2463 /*Eric DEBIEF <debief@telemsa.com>*/
2464 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2465 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2467 .name
= "Euresys Picolo Tetra",
2473 .gpiomask2
= 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2477 .muxsel
= {2,2,2,2},/*878A input is always MUX0, see above.*/
2478 .gpiomux
= { 0, 0, 0, 0 }, /* card has no audio */
2481 .muxsel_hook
= picolo_tetra_muxsel
,/*Required as it doesn't follow the classic input selection policy*/
2482 .tuner_type
= UNSET
,
2483 .tuner_addr
= ADDR_UNSET
,
2484 .radio_addr
= ADDR_UNSET
,
2486 [BTTV_BOARD_SPIRIT_TV
] = {
2487 /* Spirit TV Tuner from http://spiritmodems.com.au */
2488 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2489 .name
= "Spirit TV Tuner",
2494 .gpiomask
= 0x0000000f,
2495 .muxsel
= { 2, 1, 1 },
2496 .gpiomux
= { 0x02, 0x00, 0x00, 0x00 },
2497 .tuner_type
= TUNER_TEMIC_PAL
,
2498 .tuner_addr
= ADDR_UNSET
,
2499 .radio_addr
= ADDR_UNSET
,
2503 [BTTV_BOARD_AVDVBT_771
] = {
2504 /* Wolfram Joost <wojo@frokaschwei.de> */
2505 .name
= "AVerMedia AVerTV DVB-T 771",
2509 .tuner_type
= TUNER_ABSENT
,
2510 .tuner_addr
= ADDR_UNSET
,
2511 .radio_addr
= ADDR_UNSET
,
2512 .muxsel
= { 3 , 3 },
2521 /* ---- card 0x7c ---------------------------------- */
2522 [BTTV_BOARD_AVDVBT_761
] = {
2523 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2524 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2525 .name
= "AverMedia AverTV DVB-T 761",
2529 .muxsel
= { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2534 .tuner_type
= UNSET
,
2535 .tuner_addr
= ADDR_UNSET
,
2536 .radio_addr
= ADDR_UNSET
,
2541 [BTTV_BOARD_MATRIX_VISIONSQ
] = {
2542 /* andre.schwarz@matrix-vision.de */
2543 .name
= "MATRIX Vision Sigma-SQ",
2549 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2,
2550 3, 3, 3, 3, 3, 3, 3, 3 },
2551 .muxsel_hook
= sigmaSQ_muxsel
,
2555 .tuner_type
= UNSET
,
2556 .tuner_addr
= ADDR_UNSET
,
2557 .radio_addr
= ADDR_UNSET
,
2559 [BTTV_BOARD_MATRIX_VISIONSLC
] = {
2560 /* andre.schwarz@matrix-vision.de */
2561 .name
= "MATRIX Vision Sigma-SLC",
2567 .muxsel
= { 2, 2, 2, 2 },
2568 .muxsel_hook
= sigmaSLC_muxsel
,
2572 .tuner_type
= UNSET
,
2573 .tuner_addr
= ADDR_UNSET
,
2574 .radio_addr
= ADDR_UNSET
,
2576 /* BTTV_BOARD_APAC_VIEWCOMP */
2577 [BTTV_BOARD_APAC_VIEWCOMP
] = {
2578 /* Attila Kondoros <attila.kondoros@chello.hu> */
2579 /* bt878 TV + FM 0x00000000 subsystem ID */
2580 .name
= "APAC Viewcomp 878(AMAX)",
2586 .muxsel
= { 2, 3, 1, 1 },
2587 .gpiomux
= { 2, 0, 0, 0 },
2591 .tuner_type
= TUNER_PHILIPS_PAL
,
2592 .tuner_addr
= ADDR_UNSET
,
2593 .radio_addr
= ADDR_UNSET
,
2594 .has_remote
= 1, /* miniremote works, see ir-kbd-gpio.c */
2595 .has_radio
= 1, /* not every card has radio */
2598 /* ---- card 0x80 ---------------------------------- */
2599 [BTTV_BOARD_DVICO_DVBT_LITE
] = {
2600 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2601 .name
= "DViCO FusionHDTV DVB-T Lite",
2609 .tuner_type
= UNSET
,
2610 .tuner_addr
= ADDR_UNSET
,
2611 .radio_addr
= ADDR_UNSET
,
2613 [BTTV_BOARD_VGEAR_MYVCD
] = {
2614 /* Steven <photon38@pchome.com.tw> */
2615 .name
= "V-Gear MyVCD",
2621 .muxsel
= {2, 3, 1, 0 },
2622 .gpiomux
= {0x31, 0x31, 0x31, 0x31 },
2626 .tuner_type
= TUNER_PHILIPS_NTSC_M
,
2627 .tuner_addr
= ADDR_UNSET
,
2628 .radio_addr
= ADDR_UNSET
,
2631 [BTTV_BOARD_SUPER_TV
] = {
2632 /* Rick C <cryptdragoon@gmail.com> */
2633 .name
= "Super TV Tuner",
2638 .muxsel
= { 2, 3, 1, 0 },
2639 .tuner_type
= TUNER_PHILIPS_NTSC
,
2640 .tuner_addr
= ADDR_UNSET
,
2641 .radio_addr
= ADDR_UNSET
,
2642 .gpiomask
= 0x008007,
2643 .gpiomux
= { 0, 0x000001,0,0 },
2647 [BTTV_BOARD_TIBET_CS16
] = {
2648 /* Chris Fanning <video4linux@haydon.net> */
2649 .name
= "Tibet Systems 'Progress DVR' CS16",
2654 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2659 .tuner_type
= UNSET
,
2660 .tuner_addr
= ADDR_UNSET
,
2661 .radio_addr
= ADDR_UNSET
,
2662 .muxsel_hook
= tibetCS16_muxsel
,
2664 [BTTV_BOARD_KODICOM_4400R
] = {
2665 /* Bill Brack <wbrack@mmm.com.hk> */
2667 * Note that, because of the card's wiring, the "master"
2668 * BT878A chip (i.e. the one which controls the analog switch
2669 * and must use this card type) is the 2nd one detected. The
2670 * other 3 chips should use card type 0x85, whose description
2671 * follows this one. There is a EEPROM on the card (which is
2672 * connected to the I2C of one of those other chips), but is
2673 * not currently handled. There is also a facility for a
2674 * "monitor", which is also not currently implemented.
2676 .name
= "Kodicom 4400R (master)",
2680 .tuner_type
= UNSET
,
2681 .tuner_addr
= ADDR_UNSET
,
2682 .radio_addr
= ADDR_UNSET
,
2684 /* GPIO bits 0-9 used for analog switch:
2685 * 00 - 03: camera selector
2686 * 04 - 06: channel (controller) selector
2687 * 07: data (1->on, 0->off)
2690 * bit 16 is input from sync separator for the channel
2692 .gpiomask
= 0x0003ff,
2694 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2699 .muxsel_hook
= kodicom4400r_muxsel
,
2701 [BTTV_BOARD_KODICOM_4400R_SL
] = {
2702 /* Bill Brack <wbrack@mmm.com.hk> */
2703 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2704 * one which controls the analog switch, and must use the card type)
2705 * is the 2nd one detected. The other 3 chips should use this card
2708 .name
= "Kodicom 4400R (slave)",
2712 .tuner_type
= UNSET
,
2713 .tuner_addr
= ADDR_UNSET
,
2714 .radio_addr
= ADDR_UNSET
,
2716 .gpiomask
= 0x010000,
2718 .muxsel
= { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2723 .muxsel_hook
= kodicom4400r_muxsel
,
2725 /* ---- card 0x86---------------------------------- */
2726 [BTTV_BOARD_ADLINK_RTV24
] = {
2727 /* Michael Henson <mhenson@clarityvi.com> */
2728 /* Adlink RTV24 with special unlock codes */
2729 .name
= "Adlink RTV24",
2734 .muxsel
= { 2, 3, 1, 0 },
2735 .tuner_type
= UNSET
,
2736 .tuner_addr
= ADDR_UNSET
,
2737 .radio_addr
= ADDR_UNSET
,
2740 /* ---- card 0x87---------------------------------- */
2741 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE
] = {
2742 /* Michael Krufky <mkrufky@m1k.net> */
2743 .name
= "DViCO FusionHDTV 5 Lite",
2745 .tuner_type
= TUNER_LG_TDVS_H06XF
, /* TDVS-H064F */
2746 .tuner_addr
= ADDR_UNSET
,
2747 .radio_addr
= ADDR_UNSET
,
2751 .muxsel
= { 2, 3, 1 },
2752 .gpiomask
= 0x00e00007,
2753 .gpiomux
= { 0x00400005, 0, 0x00000001, 0 },
2754 .gpiomute
= 0x00c00007,
2760 /* ---- card 0x88---------------------------------- */
2761 [BTTV_BOARD_ACORP_Y878F
] = {
2762 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2763 .name
= "Acorp Y878F",
2768 .gpiomask
= 0x01fe00,
2769 .muxsel
= { 2, 3, 1, 1 },
2770 .gpiomux
= { 0x001e00, 0, 0x018000, 0x014000 },
2771 .gpiomute
= 0x002000,
2774 .tuner_type
= TUNER_YMEC_TVF66T5_B_DFF
,
2775 .tuner_addr
= 0xc1 >>1,
2776 .radio_addr
= 0xc1 >>1,
2779 /* ---- card 0x89 ---------------------------------- */
2780 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2
] = {
2781 .name
= "Conceptronic CTVFMi v2",
2786 .gpiomask
= 0x001c0007,
2787 .muxsel
= { 2, 3, 1, 1 },
2788 .gpiomux
= { 0, 1, 2, 2 },
2792 .tuner_type
= TUNER_TENA_9533_DI
,
2793 .tuner_addr
= ADDR_UNSET
,
2794 .radio_addr
= ADDR_UNSET
,
2798 /* ---- card 0x8a ---------------------------------- */
2799 [BTTV_BOARD_PV_BT878P_2E
] = {
2800 .name
= "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2805 .gpiomask
= 0x01fe00,
2806 .muxsel
= { 2,3,1,1,-1 },
2807 .digital_mode
= DIGITAL_MODE_CAMERA
,
2808 .gpiomux
= { 0x00400, 0x10400, 0x04400, 0x80000 },
2809 .gpiomute
= 0x12400,
2812 .tuner_type
= TUNER_LG_PAL_FM
,
2813 .tuner_addr
= ADDR_UNSET
,
2814 .radio_addr
= ADDR_UNSET
,
2817 /* ---- card 0x8b ---------------------------------- */
2818 [BTTV_BOARD_PV_M4900
] = {
2819 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2820 .name
= "Prolink PixelView PlayTV MPEG2 PV-M4900",
2826 .muxsel
= { 2, 3, 1, 1 },
2827 .gpiomux
= { 0x21, 0x20, 0x24, 0x2c },
2831 .tuner_type
= TUNER_YMEC_TVF_5533MF
,
2832 .tuner_addr
= ADDR_UNSET
,
2833 .radio_addr
= ADDR_UNSET
,
2837 /* ---- card 0x8c ---------------------------------- */
2838 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2839 one external BNC composite input (mux 2)
2840 three internal composite inputs (unknown muxes)
2841 an 18-bit stereo A/D (CS5331A), which has:
2842 one external stereo unblanced (RCA) audio connection
2843 one (or 3?) internal stereo balanced (XLR) audio connection
2844 input is selected via gpio to a 14052B mux
2845 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2846 gain is controlled via an X9221A chip on the I2C bus @0x28
2847 sample rate is controlled via gpio to an MK1413S
2848 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2849 There is neither a tuner nor an svideo input. */
2850 [BTTV_BOARD_OSPREY440
] = {
2851 .name
= "Osprey 440",
2853 .audio_inputs
= 2, /* this is meaningless */
2856 .muxsel
= { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
2858 .gpiomute
= 0x000, /* int + 32kHz */
2859 .gpiomux
= { 0, 0, 0x000, 0x100},
2861 .tuner_type
= UNSET
,
2862 .tuner_addr
= ADDR_UNSET
,
2863 .radio_addr
= ADDR_UNSET
,
2868 /* ---- card 0x8d ---------------------------------- */
2869 [BTTV_BOARD_ASOUND_SKYEYE
] = {
2870 .name
= "Asound Skyeye PCTV",
2876 .muxsel
= { 2, 3, 1, 1 },
2877 .gpiomux
= { 2, 0, 0, 0 },
2881 .tuner_type
= TUNER_PHILIPS_NTSC
,
2882 .tuner_addr
= ADDR_UNSET
,
2883 .radio_addr
= ADDR_UNSET
,
2885 /* ---- card 0x8e ---------------------------------- */
2886 [BTTV_BOARD_SABRENT_TVFM
] = {
2887 .name
= "Sabrent TV-FM (bttv version)",
2892 .gpiomask
= 0x108007,
2893 .muxsel
= { 2, 3, 1, 1 },
2894 .gpiomux
= { 100000, 100002, 100002, 100000 },
2899 .tuner_type
= TUNER_TNF_5335MF
,
2900 .tuner_addr
= ADDR_UNSET
,
2903 /* ---- card 0x8f ---------------------------------- */
2904 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB
] = {
2905 .name
= "Hauppauge ImpactVCB (bt878)",
2910 .gpiomask
= 0x0f, /* old: 7 */
2911 .muxsel
= { 0, 1, 3, 2 }, /* Composite 0-3 */
2915 .tuner_type
= UNSET
,
2916 .tuner_addr
= ADDR_UNSET
,
2917 .radio_addr
= ADDR_UNSET
,
2919 [BTTV_BOARD_MACHTV_MAGICTV
] = {
2920 /* Julian Calaby <julian.calaby@gmail.com>
2921 * Slightly different from original MachTV definition (0x60)
2923 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2924 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2925 * properly (methinks) causing no keyup bits being set */
2927 .name
= "MagicTV", /* rebranded MachTV */
2933 .muxsel
= { 2, 3, 1, 1 },
2934 .gpiomux
= { 0, 1, 2, 3 },
2936 .tuner_type
= TUNER_TEMIC_4009FR5_PAL
,
2937 .tuner_addr
= ADDR_UNSET
,
2938 .radio_addr
= ADDR_UNSET
,
2943 [BTTV_BOARD_SSAI_SECURITY
] = {
2944 .name
= "SSAI Security Video Interface",
2949 .muxsel
= { 0, 1, 2, 3 },
2950 .tuner_type
= UNSET
,
2951 .tuner_addr
= ADDR_UNSET
,
2952 .radio_addr
= ADDR_UNSET
,
2954 [BTTV_BOARD_SSAI_ULTRASOUND
] = {
2955 .name
= "SSAI Ultrasound Video Interface",
2960 .muxsel
= { 2, 0, 1, 3 },
2961 .tuner_type
= UNSET
,
2962 .tuner_addr
= ADDR_UNSET
,
2963 .radio_addr
= ADDR_UNSET
,
2965 /* ---- card 0x94---------------------------------- */
2966 [BTTV_BOARD_DVICO_FUSIONHDTV_2
] = {
2967 .name
= "DViCO FusionHDTV 2",
2969 .tuner_type
= TUNER_PHILIPS_FCV1236D
,
2970 .tuner_addr
= ADDR_UNSET
,
2971 .radio_addr
= ADDR_UNSET
,
2975 .muxsel
= { 2, 3, 1 },
2976 .gpiomask
= 0x00e00007,
2977 .gpiomux
= { 0x00400005, 0, 0x00000001, 0 },
2978 .gpiomute
= 0x00c00007,
2983 /* ---- card 0x95---------------------------------- */
2984 [BTTV_BOARD_TYPHOON_TVTUNERPCI
] = {
2985 .name
= "Typhoon TV-Tuner PCI (50684)",
2990 .gpiomask
= 0x3014f,
2991 .muxsel
= { 2, 3, 1, 1 },
2992 .gpiomux
= { 0x20001,0x10001, 0, 0 },
2996 .tuner_type
= TUNER_PHILIPS_PAL_I
,
2997 .tuner_addr
= ADDR_UNSET
,
2998 .radio_addr
= ADDR_UNSET
,
3000 [BTTV_BOARD_GEOVISION_GV600
] = {
3002 .name
= "Geovision GV-600",
3008 .muxsel
= { 2, 2, 2, 2, 2, 2, 2, 2,
3009 2, 2, 2, 2, 2, 2, 2, 2 },
3010 .muxsel_hook
= geovision_muxsel
,
3014 .tuner_type
= UNSET
,
3015 .tuner_addr
= ADDR_UNSET
,
3016 .radio_addr
= ADDR_UNSET
,
3018 [BTTV_BOARD_KOZUMI_KTV_01C
] = {
3019 /* Mauro Lacy <mauro@lacy.com.ar>
3020 * Based on MagicTV and Conceptronic CONTVFMi */
3022 .name
= "Kozumi KTV-01C",
3027 .gpiomask
= 0x008007,
3028 .muxsel
= { 2, 3, 1, 1 },
3029 .gpiomux
= { 0, 1, 2, 2 }, /* CONTVFMi */
3030 .gpiomute
= 3, /* CONTVFMi */
3032 .tuner_type
= TUNER_PHILIPS_FM1216ME_MK3
, /* TCL MK3 */
3033 .tuner_addr
= ADDR_UNSET
,
3034 .radio_addr
= ADDR_UNSET
,
3041 static const unsigned int bttv_num_tvcards
= ARRAY_SIZE(bttv_tvcards
);
3043 /* ----------------------------------------------------------------------- */
3045 static unsigned char eeprom_data
[256];
3050 void __devinit
bttv_idcard(struct bttv
*btv
)
3052 unsigned int gpiobits
;
3056 /* read PCI subsystem ID */
3057 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_ID
, &tmp
);
3058 btv
->cardid
= tmp
<< 16;
3059 pci_read_config_word(btv
->c
.pci
, PCI_SUBSYSTEM_VENDOR_ID
, &tmp
);
3062 if (0 != btv
->cardid
&& 0xffffffff != btv
->cardid
) {
3063 /* look for the card */
3064 for (type
= -1, i
= 0; cards
[i
].id
!= 0; i
++)
3065 if (cards
[i
].id
== btv
->cardid
)
3070 printk(KERN_INFO
"bttv%d: detected: %s [card=%d], "
3071 "PCI subsystem ID is %04x:%04x\n",
3072 btv
->c
.nr
,cards
[type
].name
,cards
[type
].cardnr
,
3073 btv
->cardid
& 0xffff,
3074 (btv
->cardid
>> 16) & 0xffff);
3075 btv
->c
.type
= cards
[type
].cardnr
;
3078 printk(KERN_INFO
"bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
3079 btv
->c
.nr
, btv
->cardid
& 0xffff,
3080 (btv
->cardid
>> 16) & 0xffff);
3081 printk(KERN_DEBUG
"please mail id, board name and "
3082 "the correct card= insmod option to video4linux-list@redhat.com\n");
3086 /* let the user override the autodetected type */
3087 if (card
[btv
->c
.nr
] < bttv_num_tvcards
)
3088 btv
->c
.type
=card
[btv
->c
.nr
];
3090 /* print which card config we are using */
3091 printk(KERN_INFO
"bttv%d: using: %s [card=%d,%s]\n",btv
->c
.nr
,
3092 bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
,
3093 card
[btv
->c
.nr
] < bttv_num_tvcards
3094 ? "insmod option" : "autodetected");
3096 /* overwrite gpio stuff ?? */
3097 if (UNSET
== audioall
&& UNSET
== audiomux
[0])
3100 if (UNSET
!= audiomux
[0]) {
3102 for (i
= 0; i
< ARRAY_SIZE(bttv_tvcards
->gpiomux
); i
++) {
3103 bttv_tvcards
[btv
->c
.type
].gpiomux
[i
] = audiomux
[i
];
3104 gpiobits
|= audiomux
[i
];
3107 gpiobits
= audioall
;
3108 for (i
= 0; i
< ARRAY_SIZE(bttv_tvcards
->gpiomux
); i
++) {
3109 bttv_tvcards
[btv
->c
.type
].gpiomux
[i
] = audioall
;
3112 bttv_tvcards
[btv
->c
.type
].gpiomask
= (UNSET
!= gpiomask
) ? gpiomask
: gpiobits
;
3113 printk(KERN_INFO
"bttv%d: gpio config override: mask=0x%x, mux=",
3114 btv
->c
.nr
,bttv_tvcards
[btv
->c
.type
].gpiomask
);
3115 for (i
= 0; i
< ARRAY_SIZE(bttv_tvcards
->gpiomux
); i
++) {
3116 printk("%s0x%x", i
? "," : "", bttv_tvcards
[btv
->c
.type
].gpiomux
[i
]);
3122 * (most) board specific initialisations goes here
3125 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3126 static void identify_by_eeprom(struct bttv
*btv
, unsigned char eeprom_data
[256])
3130 if (0 == strncmp(eeprom_data
,"GET MM20xPCTV",13))
3131 type
= BTTV_BOARD_MODTEC_205
;
3132 else if (0 == strncmp(eeprom_data
+20,"Picolo",7))
3133 type
= BTTV_BOARD_EURESYS_PICOLO
;
3134 else if (eeprom_data
[0] == 0x84 && eeprom_data
[2]== 0)
3135 type
= BTTV_BOARD_HAUPPAUGE
; /* old bt848 */
3139 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3140 btv
->c
.nr
, bttv_tvcards
[btv
->c
.type
].name
, btv
->c
.type
);
3144 static void flyvideo_gpio(struct bttv
*btv
)
3146 int gpio
,has_remote
,has_radio
,is_capture_only
,is_lr90
,has_tda9820_tda9821
;
3147 int tuner
=UNSET
,ttype
;
3149 gpio_inout(0xffffff, 0);
3150 udelay(8); /* without this we would see the 0x1800 mask */
3152 /* FIXME: must restore OUR_EN ??? */
3154 /* all cards provide GPIO info, some have an additional eeprom
3155 * LR50: GPIO coding can be found lower right CP1 .. CP9
3156 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3158 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3160 * lowest 3 bytes are remote control codes (no handshake needed)
3161 * xxxFFF: No remote control chip soldered
3162 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3163 * Note: Some bits are Audio_Mask !
3165 ttype
=(gpio
&0x0f0000)>>16;
3167 case 0x0: tuner
=2; /* NTSC, e.g. TPI8NSR11P */
3169 case 0x2: tuner
=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3171 case 0x4: tuner
=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3173 case 0x6: tuner
=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3175 case 0xC: tuner
=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3178 printk(KERN_INFO
"bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv
->c
.nr
);
3181 has_remote
= gpio
& 0x800000;
3182 has_radio
= gpio
& 0x400000;
3183 /* unknown 0x200000;
3184 * unknown2 0x100000; */
3185 is_capture_only
= !(gpio
& 0x008000); /* GPIO15 */
3186 has_tda9820_tda9821
= !(gpio
& 0x004000);
3187 is_lr90
= !(gpio
& 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3189 * gpio & 0x001000 output bit for audio routing */
3192 tuner
= TUNER_ABSENT
; /* No tuner present */
3194 printk(KERN_INFO
"bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3195 btv
->c
.nr
, has_radio
? "yes":"no ", has_remote
? "yes":"no ", tuner
, gpio
);
3196 printk(KERN_INFO
"bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3197 btv
->c
.nr
, is_lr90
?"yes":"no ", has_tda9820_tda9821
?"yes":"no ",
3198 is_capture_only
?"yes":"no ");
3200 if (tuner
!= UNSET
) /* only set if known tuner autodetected, else let insmod option through */
3201 btv
->tuner_type
= tuner
;
3202 btv
->has_radio
= has_radio
;
3204 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3205 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3206 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3207 if(has_tda9820_tda9821
) btv
->audio_mode_gpio
= lt9415_audio
;
3208 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3211 static int miro_tunermap
[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3212 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3213 static int miro_fmtuner
[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3214 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3216 static void miro_pinnacle_gpio(struct bttv
*btv
)
3221 gpio_inout(0xffffff, 0);
3223 id
= ((gpio
>>10) & 63) -1;
3224 msp
= bttv_I2CRead(btv
, I2C_ADDR_MSP3400
, "MSP34xx");
3226 btv
->tuner_type
= miro_tunermap
[id
];
3227 if (0 == (gpio
& 0x20)) {
3229 if (!miro_fmtuner
[id
]) {
3230 btv
->has_matchbox
= 1;
3231 btv
->mbox_we
= (1<<6);
3232 btv
->mbox_most
= (1<<7);
3233 btv
->mbox_clk
= (1<<8);
3234 btv
->mbox_data
= (1<<9);
3235 btv
->mbox_mask
= (1<<6)|(1<<7)|(1<<8)|(1<<9);
3241 if (btv
->c
.type
== BTTV_BOARD_MIRO
)
3242 btv
->c
.type
= BTTV_BOARD_MIROPRO
;
3243 if (btv
->c
.type
== BTTV_BOARD_PINNACLE
)
3244 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
3247 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3248 btv
->c
.nr
, id
+1, btv
->tuner_type
,
3249 !btv
->has_radio
? "no" :
3250 (btv
->has_matchbox
? "matchbox" : "fmtuner"),
3251 (-1 == msp
) ? "no" : "yes");
3253 /* new cards with microtune tuner */
3258 info
= "PAL / mono";
3259 btv
->tda9887_conf
= TDA9887_INTERCARRIER
;
3262 info
= "PAL+SECAM / stereo";
3264 btv
->tda9887_conf
= TDA9887_QSS
;
3267 info
= "NTSC / stereo";
3269 btv
->tda9887_conf
= TDA9887_QSS
;
3272 info
= "PAL+SECAM / mono";
3273 btv
->tda9887_conf
= TDA9887_QSS
;
3276 info
= "NTSC / mono";
3277 btv
->tda9887_conf
= TDA9887_INTERCARRIER
;
3280 info
= "NTSC / stereo";
3281 btv
->tda9887_conf
= TDA9887_INTERCARRIER
;
3284 info
= "PAL / stereo";
3285 btv
->tda9887_conf
= TDA9887_INTERCARRIER
;
3288 info
= "oops: unknown card";
3292 btv
->c
.type
= BTTV_BOARD_PINNACLEPRO
;
3294 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3295 btv
->c
.nr
, id
, info
, btv
->has_radio
? "yes" : "no");
3296 btv
->tuner_type
= TUNER_MT2032
;
3300 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3301 #define LM1882_SYNC_DRIVE 0x200000L
3303 static void init_ids_eagle(struct bttv
*btv
)
3305 gpio_inout(0xffffff,0xFFFF37);
3306 gpio_write(0x200020);
3308 /* flash strobe inverter ?! */
3309 gpio_write(0x200024);
3311 /* switch sync drive off */
3312 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
3314 /* set BT848 muxel to 2 */
3315 btaor((2)<<5, ~(2<<5), BT848_IFORM
);
3318 /* Muxsel helper for the IDS Eagle.
3319 * the eagles does not use the standard muxsel-bits but
3320 * has its own multiplexer */
3321 static void eagle_muxsel(struct bttv
*btv
, unsigned int input
)
3323 btaor((2)<<5, ~(3<<5), BT848_IFORM
);
3324 gpio_bits(3,bttv_tvcards
[btv
->c
.type
].muxsel
[input
&7]);
3327 /* set chroma ADC to sleep */
3328 btor(BT848_ADC_C_SLEEP
, BT848_ADC
);
3329 /* set to composite video */
3330 btand(~BT848_CONTROL_COMP
, BT848_E_CONTROL
);
3331 btand(~BT848_CONTROL_COMP
, BT848_O_CONTROL
);
3333 /* switch sync drive off */
3334 gpio_bits(LM1882_SYNC_DRIVE
,LM1882_SYNC_DRIVE
);
3337 static void gvc1100_muxsel(struct bttv
*btv
, unsigned int input
)
3339 static const int masks
[] = {0x30, 0x01, 0x12, 0x23};
3340 gpio_write(masks
[input
%4]);
3343 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3346 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3347 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3349 IN - sensor inputs, INx - sensor inputs and TI XORed together
3350 O1,O2,O3 - alarm outputs (relays)
3352 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3356 static void init_lmlbt4x(struct bttv
*btv
)
3358 printk(KERN_DEBUG
"LMLBT4x init\n");
3359 btwrite(0x000000, BT848_GPIO_REG_INP
);
3360 gpio_inout(0xffffff, 0x0006C0);
3361 gpio_write(0x000000);
3364 static void sigmaSQ_muxsel(struct bttv
*btv
, unsigned int input
)
3366 unsigned int inmux
= input
% 8;
3367 gpio_inout( 0xf, 0xf );
3368 gpio_bits( 0xf, inmux
);
3371 static void sigmaSLC_muxsel(struct bttv
*btv
, unsigned int input
)
3373 unsigned int inmux
= input
% 4;
3374 gpio_inout( 3<<9, 3<<9 );
3375 gpio_bits( 3<<9, inmux
<<9 );
3378 static void geovision_muxsel(struct bttv
*btv
, unsigned int input
)
3380 unsigned int inmux
= input
% 16;
3381 gpio_inout(0xf, 0xf);
3382 gpio_bits(0xf, inmux
);
3385 /* ----------------------------------------------------------------------- */
3387 static void bttv_reset_audio(struct bttv
*btv
)
3390 * BT878A has a audio-reset register.
3391 * 1. This register is an audio reset function but it is in
3392 * function-0 (video capture) address space.
3393 * 2. It is enough to do this once per power-up of the card.
3394 * 3. There is a typo in the Conexant doc -- it is not at
3395 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3396 * --//Shrikumar 030609
3402 printk("bttv%d: BT878A ARESET\n",btv
->c
.nr
);
3403 btwrite((1<<7), 0x058);
3408 /* initialization part one -- before registering i2c bus */
3409 void __devinit
bttv_init_card1(struct bttv
*btv
)
3411 switch (btv
->c
.type
) {
3412 case BTTV_BOARD_HAUPPAUGE
:
3413 case BTTV_BOARD_HAUPPAUGE878
:
3414 boot_msp34xx(btv
,5);
3416 case BTTV_BOARD_VOODOOTV_200
:
3417 case BTTV_BOARD_VOODOOTV_FM
:
3418 boot_msp34xx(btv
,20);
3420 case BTTV_BOARD_AVERMEDIA98
:
3421 boot_msp34xx(btv
,11);
3423 case BTTV_BOARD_HAUPPAUGEPVR
:
3426 case BTTV_BOARD_TWINHAN_DST
:
3427 case BTTV_BOARD_AVDVBT_771
:
3428 case BTTV_BOARD_PINNACLESAT
:
3429 btv
->use_i2c_hw
= 1;
3431 case BTTV_BOARD_ADLINK_RTV24
:
3436 if (!bttv_tvcards
[btv
->c
.type
].has_dvb
)
3437 bttv_reset_audio(btv
);
3440 /* initialization part two -- after registering i2c bus */
3441 void __devinit
bttv_init_card2(struct bttv
*btv
)
3443 int addr
=ADDR_UNSET
;
3445 btv
->tuner_type
= UNSET
;
3447 if (BTTV_BOARD_UNKNOWN
== btv
->c
.type
) {
3448 bttv_readee(btv
,eeprom_data
,0xa0);
3449 identify_by_eeprom(btv
,eeprom_data
);
3452 switch (btv
->c
.type
) {
3453 case BTTV_BOARD_MIRO
:
3454 case BTTV_BOARD_MIROPRO
:
3455 case BTTV_BOARD_PINNACLE
:
3456 case BTTV_BOARD_PINNACLEPRO
:
3458 miro_pinnacle_gpio(btv
);
3460 case BTTV_BOARD_FLYVIDEO_98
:
3461 case BTTV_BOARD_MAXI
:
3462 case BTTV_BOARD_LIFE_FLYKIT
:
3463 case BTTV_BOARD_FLYVIDEO
:
3464 case BTTV_BOARD_TYPHOON_TVIEW
:
3465 case BTTV_BOARD_CHRONOS_VS2
:
3466 case BTTV_BOARD_FLYVIDEO_98FM
:
3467 case BTTV_BOARD_FLYVIDEO2000
:
3468 case BTTV_BOARD_FLYVIDEO98EZ
:
3469 case BTTV_BOARD_CONFERENCETV
:
3470 case BTTV_BOARD_LIFETEC_9415
:
3473 case BTTV_BOARD_HAUPPAUGE
:
3474 case BTTV_BOARD_HAUPPAUGE878
:
3475 case BTTV_BOARD_HAUPPAUGEPVR
:
3476 /* pick up some config infos from the eeprom */
3477 bttv_readee(btv
,eeprom_data
,0xa0);
3478 hauppauge_eeprom(btv
);
3480 case BTTV_BOARD_AVERMEDIA98
:
3481 case BTTV_BOARD_AVPHONE98
:
3482 bttv_readee(btv
,eeprom_data
,0xa0);
3483 avermedia_eeprom(btv
);
3485 case BTTV_BOARD_PXC200
:
3488 case BTTV_BOARD_PICOLO_TETRA_CHIP
:
3489 picolo_tetra_init(btv
);
3491 case BTTV_BOARD_VHX
:
3493 btv
->has_matchbox
= 1;
3494 btv
->mbox_we
= 0x20;
3496 btv
->mbox_clk
= 0x08;
3497 btv
->mbox_data
= 0x10;
3498 btv
->mbox_mask
= 0x38;
3500 case BTTV_BOARD_VOBIS_BOOSTAR
:
3501 case BTTV_BOARD_TERRATV
:
3502 terratec_active_radio_upgrade(btv
);
3504 case BTTV_BOARD_MAGICTVIEW061
:
3505 if (btv
->cardid
== 0x3002144f) {
3507 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv
->c
.nr
);
3510 case BTTV_BOARD_STB2
:
3511 if (btv
->cardid
== 0x3060121a) {
3512 /* Fix up entry for 3DFX VoodooTV 100,
3513 which is an OEM STB card variant. */
3515 btv
->tuner_type
=TUNER_TEMIC_NTSC
;
3518 case BTTV_BOARD_OSPREY1x0
:
3519 case BTTV_BOARD_OSPREY1x0_848
:
3520 case BTTV_BOARD_OSPREY101_848
:
3521 case BTTV_BOARD_OSPREY1x1
:
3522 case BTTV_BOARD_OSPREY1x1_SVID
:
3523 case BTTV_BOARD_OSPREY2xx
:
3524 case BTTV_BOARD_OSPREY2x0_SVID
:
3525 case BTTV_BOARD_OSPREY2x0
:
3526 case BTTV_BOARD_OSPREY440
:
3527 case BTTV_BOARD_OSPREY500
:
3528 case BTTV_BOARD_OSPREY540
:
3529 case BTTV_BOARD_OSPREY2000
:
3530 bttv_readee(btv
,eeprom_data
,0xa0);
3531 osprey_eeprom(btv
, eeprom_data
);
3533 case BTTV_BOARD_IDS_EAGLE
:
3534 init_ids_eagle(btv
);
3536 case BTTV_BOARD_MODTEC_205
:
3537 bttv_readee(btv
,eeprom_data
,0xa0);
3540 case BTTV_BOARD_LMLBT4
:
3543 case BTTV_BOARD_TIBET_CS16
:
3544 tibetCS16_init(btv
);
3546 case BTTV_BOARD_KODICOM_4400R
:
3547 kodicom4400r_init(btv
);
3551 /* pll configuration */
3552 if (!(btv
->id
==848 && btv
->revision
==0x11)) {
3553 /* defaults from card list */
3554 if (PLL_28
== bttv_tvcards
[btv
->c
.type
].pll
) {
3555 btv
->pll
.pll_ifreq
=28636363;
3556 btv
->pll
.pll_crystal
=BT848_IFORM_XT0
;
3558 if (PLL_35
== bttv_tvcards
[btv
->c
.type
].pll
) {
3559 btv
->pll
.pll_ifreq
=35468950;
3560 btv
->pll
.pll_crystal
=BT848_IFORM_XT1
;
3562 /* insmod options can override */
3563 switch (pll
[btv
->c
.nr
]) {
3565 btv
->pll
.pll_crystal
= 0;
3566 btv
->pll
.pll_ifreq
= 0;
3567 btv
->pll
.pll_ofreq
= 0;
3569 case 1: /* 28 MHz */
3571 btv
->pll
.pll_ifreq
= 28636363;
3572 btv
->pll
.pll_ofreq
= 0;
3573 btv
->pll
.pll_crystal
= BT848_IFORM_XT0
;
3575 case 2: /* 35 MHz */
3577 btv
->pll
.pll_ifreq
= 35468950;
3578 btv
->pll
.pll_ofreq
= 0;
3579 btv
->pll
.pll_crystal
= BT848_IFORM_XT1
;
3583 btv
->pll
.pll_current
= -1;
3585 /* tuner configuration (from card list / autodetect / insmod option) */
3586 if (ADDR_UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_addr
)
3587 addr
= bttv_tvcards
[btv
->c
.type
].tuner_addr
;
3589 if (UNSET
!= bttv_tvcards
[btv
->c
.type
].tuner_type
)
3590 if(UNSET
== btv
->tuner_type
)
3591 btv
->tuner_type
= bttv_tvcards
[btv
->c
.type
].tuner_type
;
3592 if (UNSET
!= tuner
[btv
->c
.nr
])
3593 btv
->tuner_type
= tuner
[btv
->c
.nr
];
3595 if (btv
->tuner_type
== TUNER_ABSENT
||
3596 bttv_tvcards
[btv
->c
.type
].tuner
== UNSET
)
3597 printk(KERN_INFO
"bttv%d: tuner absent\n", btv
->c
.nr
);
3598 else if(btv
->tuner_type
== UNSET
)
3599 printk(KERN_WARNING
"bttv%d: tuner type unset\n", btv
->c
.nr
);
3601 printk(KERN_INFO
"bttv%d: tuner type=%d\n", btv
->c
.nr
,
3604 if (btv
->tuner_type
!= UNSET
) {
3605 struct tuner_setup tun_setup
;
3607 tun_setup
.mode_mask
= T_ANALOG_TV
| T_DIGITAL_TV
;
3608 tun_setup
.type
= btv
->tuner_type
;
3609 tun_setup
.addr
= addr
;
3611 bttv_call_i2c_clients(btv
, TUNER_SET_TYPE_ADDR
, &tun_setup
);
3614 if (btv
->tda9887_conf
) {
3615 struct v4l2_priv_tun_config tda9887_cfg
;
3617 tda9887_cfg
.tuner
= TUNER_TDA9887
;
3618 tda9887_cfg
.priv
= &btv
->tda9887_conf
;
3620 bttv_call_i2c_clients(btv
, TUNER_SET_CONFIG
, &tda9887_cfg
);
3623 btv
->svhs
= bttv_tvcards
[btv
->c
.type
].svhs
;
3624 if (svhs
[btv
->c
.nr
] != UNSET
)
3625 btv
->svhs
= svhs
[btv
->c
.nr
];
3626 if (remote
[btv
->c
.nr
] != UNSET
)
3627 btv
->has_remote
= remote
[btv
->c
.nr
];
3629 if (bttv_tvcards
[btv
->c
.type
].has_radio
)
3631 if (bttv_tvcards
[btv
->c
.type
].has_remote
)
3633 if (!bttv_tvcards
[btv
->c
.type
].no_gpioirq
)
3635 if (bttv_tvcards
[btv
->c
.type
].volume_gpio
)
3636 btv
->volume_gpio
=bttv_tvcards
[btv
->c
.type
].volume_gpio
;
3637 if (bttv_tvcards
[btv
->c
.type
].audio_mode_gpio
)
3638 btv
->audio_mode_gpio
=bttv_tvcards
[btv
->c
.type
].audio_mode_gpio
;
3640 if (bttv_tvcards
[btv
->c
.type
].digital_mode
== DIGITAL_MODE_CAMERA
) {
3641 /* detect Bt832 chip for quartzsight digital camera */
3642 if ((bttv_I2CRead(btv
, I2C_ADDR_BT832_ALT1
, "Bt832") >=0) ||
3643 (bttv_I2CRead(btv
, I2C_ADDR_BT832_ALT2
, "Bt832") >=0))
3650 if (bttv_tvcards
[btv
->c
.type
].tuner
== UNSET
)
3651 return; /* no tuner or related drivers to load */
3653 /* try to detect audio/fader chips */
3654 if (!bttv_tvcards
[btv
->c
.type
].no_msp34xx
&&
3655 bttv_I2CRead(btv
, I2C_ADDR_MSP3400
, "MSP34xx") >=0)
3656 request_module("msp3400");
3658 if (bttv_tvcards
[btv
->c
.type
].msp34xx_alt
&&
3659 bttv_I2CRead(btv
, I2C_ADDR_MSP3400_ALT
, "MSP34xx (alternate address)") >=0)
3660 request_module("msp3400");
3662 if (!bttv_tvcards
[btv
->c
.type
].no_tda9875
&&
3663 bttv_I2CRead(btv
, I2C_ADDR_TDA9875
, "TDA9875") >=0)
3664 request_module("tda9875");
3666 if (!bttv_tvcards
[btv
->c
.type
].no_tda7432
&&
3667 bttv_I2CRead(btv
, I2C_ADDR_TDA7432
, "TDA7432") >=0)
3668 request_module("tda7432");
3670 if (bttv_tvcards
[btv
->c
.type
].needs_tvaudio
)
3671 request_module("tvaudio");
3673 if (btv
->tuner_type
!= UNSET
&& btv
->tuner_type
!= TUNER_ABSENT
)
3674 request_module("tuner");
3678 /* ----------------------------------------------------------------------- */
3680 static void modtec_eeprom(struct bttv
*btv
)
3682 if( strncmp(&(eeprom_data
[0x1e]),"Temic 4066 FY5",14) ==0) {
3683 btv
->tuner_type
=TUNER_TEMIC_4066FY5_PAL_I
;
3684 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3685 btv
->c
.nr
,&eeprom_data
[0x1e]);
3686 } else if (strncmp(&(eeprom_data
[0x1e]),"Alps TSBB5",10) ==0) {
3687 btv
->tuner_type
=TUNER_ALPS_TSBB5_PAL_I
;
3688 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3689 btv
->c
.nr
,&eeprom_data
[0x1e]);
3690 } else if (strncmp(&(eeprom_data
[0x1e]),"Philips FM1246",14) ==0) {
3691 btv
->tuner_type
=TUNER_PHILIPS_NTSC
;
3692 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3693 btv
->c
.nr
,&eeprom_data
[0x1e]);
3695 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3696 btv
->c
.nr
,&eeprom_data
[0x1e]);
3700 static void __devinit
hauppauge_eeprom(struct bttv
*btv
)
3704 tveeprom_hauppauge_analog(&btv
->i2c_client
, &tv
, eeprom_data
);
3705 btv
->tuner_type
= tv
.tuner_type
;
3706 btv
->has_radio
= tv
.has_radio
;
3708 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3709 btv
->c
.nr
, tv
.model
);
3712 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3713 * type based on model #.
3715 if(tv
.model
== 64900) {
3716 printk("bttv%d: Switching board type from %s to %s\n",
3718 bttv_tvcards
[btv
->c
.type
].name
,
3719 bttv_tvcards
[BTTV_BOARD_HAUPPAUGE_IMPACTVCB
].name
);
3720 btv
->c
.type
= BTTV_BOARD_HAUPPAUGE_IMPACTVCB
;
3724 static int terratec_active_radio_upgrade(struct bttv
*btv
)
3729 btv
->has_matchbox
= 1;
3730 btv
->mbox_we
= 0x10;
3731 btv
->mbox_most
= 0x20;
3732 btv
->mbox_clk
= 0x08;
3733 btv
->mbox_data
= 0x04;
3734 btv
->mbox_mask
= 0x3c;
3736 btv
->mbox_iow
= 1 << 8;
3737 btv
->mbox_ior
= 1 << 9;
3738 btv
->mbox_csel
= 1 << 10;
3741 tea5757_write(btv
, 5 * freq
+ 0x358); /* write 0x1ed8 */
3742 if (0x1ed8 == tea5757_read(btv
)) {
3743 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3746 btv
->has_matchbox
= 1;
3749 btv
->has_matchbox
= 0;
3755 /* ----------------------------------------------------------------------- */
3758 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3760 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3761 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3762 * unpacked with unzip).
3764 #define PVR_GPIO_DELAY 10
3766 #define BTTV_ALT_DATA 0x000001
3767 #define BTTV_ALT_DCLK 0x100000
3768 #define BTTV_ALT_NCONFIG 0x800000
3770 static int __devinit
pvr_altera_load(struct bttv
*btv
, u8
*micro
, u32 microlen
)
3776 gpio_inout(0xffffff,BTTV_ALT_DATA
|BTTV_ALT_DCLK
|BTTV_ALT_NCONFIG
);
3778 udelay(PVR_GPIO_DELAY
);
3780 gpio_write(BTTV_ALT_NCONFIG
);
3781 udelay(PVR_GPIO_DELAY
);
3783 for (n
= 0; n
< microlen
; n
++) {
3785 for (i
= 0 ; i
< 8 ; i
++) {
3786 gpio_bits(BTTV_ALT_DCLK
,0);
3788 gpio_bits(BTTV_ALT_DATA
,BTTV_ALT_DATA
);
3790 gpio_bits(BTTV_ALT_DATA
,0);
3791 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3795 gpio_bits(BTTV_ALT_DCLK
,0);
3796 udelay(PVR_GPIO_DELAY
);
3798 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3799 for (i
= 0 ; i
< 30 ; i
++) {
3800 gpio_bits(BTTV_ALT_DCLK
,0);
3801 gpio_bits(BTTV_ALT_DCLK
,BTTV_ALT_DCLK
);
3803 gpio_bits(BTTV_ALT_DCLK
,0);
3807 static int __devinit
pvr_boot(struct bttv
*btv
)
3809 const struct firmware
*fw_entry
;
3812 rc
= request_firmware(&fw_entry
, "hcwamc.rbf", &btv
->c
.pci
->dev
);
3814 printk(KERN_WARNING
"bttv%d: no altera firmware [via hotplug]\n",
3818 rc
= pvr_altera_load(btv
, fw_entry
->data
, fw_entry
->size
);
3819 printk(KERN_INFO
"bttv%d: altera firmware upload %s\n",
3820 btv
->c
.nr
, (rc
< 0) ? "failed" : "ok");
3821 release_firmware(fw_entry
);
3825 /* ----------------------------------------------------------------------- */
3826 /* some osprey specific stuff */
3828 static void __devinit
osprey_eeprom(struct bttv
*btv
, const u8 ee
[256])
3834 /* This code will nevery actually get called in this case.... */
3835 if (btv
->c
.type
== BTTV_BOARD_UNKNOWN
) {
3836 /* this might be an antique... check for MMAC label in eeprom */
3837 if (!strncmp(ee
, "MMAC", 4)) {
3839 for (i
= 0; i
< 21; i
++)
3841 if (checksum
!= ee
[21])
3843 cardid
= BTTV_BOARD_OSPREY1x0_848
;
3844 for (i
= 12; i
< 21; i
++)
3845 serial
*= 10, serial
+= ee
[i
] - '0';
3848 unsigned short type
;
3850 for (i
= 4*16; i
< 8*16; i
+= 16) {
3851 u16 checksum
= ip_compute_csum(ee
+ i
, 16);
3853 if ((checksum
&0xff) + (checksum
>>8) == 0xff)
3860 /* found a valid descriptor */
3861 type
= be16_to_cpup((u16
*)(ee
+4));
3866 cardid
= BTTV_BOARD_OSPREY1x0_848
;
3869 cardid
= BTTV_BOARD_OSPREY101_848
;
3875 cardid
= BTTV_BOARD_OSPREY1x0
;
3879 cardid
= BTTV_BOARD_OSPREY1x1
;
3884 cardid
= BTTV_BOARD_OSPREY1x1_SVID
;
3890 cardid
= BTTV_BOARD_OSPREY2xx
;
3894 cardid
= BTTV_BOARD_OSPREY2x0_SVID
;
3897 cardid
= BTTV_BOARD_OSPREY500
;
3901 cardid
= BTTV_BOARD_OSPREY540
;
3902 /* bttv_osprey_540_init(btv); */
3907 cardid
= BTTV_BOARD_OSPREY2x0
;
3908 /* enable output on select control lines */
3909 gpio_inout(0xffffff,0x000303);
3912 cardid
= BTTV_BOARD_OSPREY440
;
3915 /* unknown...leave generic, but get serial # */
3916 printk(KERN_INFO
"bttv%d: "
3917 "osprey eeprom: unknown card type 0x%04x\n",
3921 serial
= be32_to_cpup((u32
*)(ee
+6));
3924 printk(KERN_INFO
"bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3926 cardid
>0 ? bttv_tvcards
[cardid
].name
: "Unknown", serial
);
3928 if (cardid
<0 || btv
->c
.type
== cardid
)
3931 /* card type isn't set correctly */
3932 if (card
[btv
->c
.nr
] < bttv_num_tvcards
) {
3933 printk(KERN_WARNING
"bttv%d: osprey eeprom: "
3934 "Not overriding user specified card type\n", btv
->c
.nr
);
3936 printk(KERN_INFO
"bttv%d: osprey eeprom: "
3937 "Changing card type from %d to %d\n", btv
->c
.nr
,
3938 btv
->c
.type
, cardid
);
3939 btv
->c
.type
= cardid
;
3943 /* ----------------------------------------------------------------------- */
3944 /* AVermedia specific stuff, from bktr_card.c */
3946 static int tuner_0_table
[] = {
3947 TUNER_PHILIPS_NTSC
, TUNER_PHILIPS_PAL
/* PAL-BG*/,
3948 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
/* PAL-I*/,
3949 TUNER_PHILIPS_PAL
, TUNER_PHILIPS_PAL
,
3950 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_SECAM
,
3951 TUNER_PHILIPS_SECAM
, TUNER_PHILIPS_PAL
,
3952 TUNER_PHILIPS_FM1216ME_MK3
};
3954 static int tuner_1_table
[] = {
3955 TUNER_TEMIC_NTSC
, TUNER_TEMIC_PAL
,
3956 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3957 TUNER_TEMIC_PAL
, TUNER_TEMIC_PAL
,
3958 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_4012FY5
, /* TUNER_TEMIC_SECAM */
3959 TUNER_TEMIC_4012FY5
, TUNER_TEMIC_PAL
};
3961 static void __devinit
avermedia_eeprom(struct bttv
*btv
)
3963 int tuner_make
,tuner_tv_fm
,tuner_format
,tuner
=0;
3965 tuner_make
= (eeprom_data
[0x41] & 0x7);
3966 tuner_tv_fm
= (eeprom_data
[0x41] & 0x18) >> 3;
3967 tuner_format
= (eeprom_data
[0x42] & 0xf0) >> 4;
3968 btv
->has_remote
= (eeprom_data
[0x42] & 0x01);
3970 if (tuner_make
== 0 || tuner_make
== 2)
3971 if(tuner_format
<=0x0a)
3972 tuner
= tuner_0_table
[tuner_format
];
3973 if (tuner_make
== 1)
3974 if(tuner_format
<=9)
3975 tuner
= tuner_1_table
[tuner_format
];
3977 if (tuner_make
== 4)
3978 if(tuner_format
== 0x09)
3979 tuner
= TUNER_LG_NTSC_NEW_TAPC
; /* TAPC-G702P */
3981 printk(KERN_INFO
"bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3982 btv
->c
.nr
,eeprom_data
[0x41],eeprom_data
[0x42]);
3984 btv
->tuner_type
=tuner
;
3987 printk("Unknown type");
3988 printk(" radio:%s remote control:%s\n",
3989 tuner_tv_fm
? "yes" : "no",
3990 btv
->has_remote
? "yes" : "no");
3993 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3994 void bttv_tda9880_setnorm(struct bttv
*btv
, int norm
)
3996 /* fix up our card entry */
3997 if(norm
==V4L2_STD_NTSC
) {
3998 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].gpiomux
[TVAUDIO_INPUT_TUNER
]=0x957fff;
3999 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].gpiomute
=0x957fff;
4000 bttv_tvcards
[BTTV_BOARD_VOODOOTV_200
].gpiomux
[TVAUDIO_INPUT_TUNER
]=0x957fff;
4001 bttv_tvcards
[BTTV_BOARD_VOODOOTV_200
].gpiomute
=0x957fff;
4002 dprintk("bttv_tda9880_setnorm to NTSC\n");
4005 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].gpiomux
[TVAUDIO_INPUT_TUNER
]=0x947fff;
4006 bttv_tvcards
[BTTV_BOARD_VOODOOTV_FM
].gpiomute
=0x947fff;
4007 bttv_tvcards
[BTTV_BOARD_VOODOOTV_200
].gpiomux
[TVAUDIO_INPUT_TUNER
]=0x947fff;
4008 bttv_tvcards
[BTTV_BOARD_VOODOOTV_200
].gpiomute
=0x947fff;
4009 dprintk("bttv_tda9880_setnorm to PAL\n");
4011 /* set GPIO according */
4012 gpio_bits(bttv_tvcards
[btv
->c
.type
].gpiomask
,
4013 bttv_tvcards
[btv
->c
.type
].gpiomux
[btv
->audio
]);
4018 * reset/enable the MSP on some Hauppauge cards
4019 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4024 static void __devinit
boot_msp34xx(struct bttv
*btv
, int pin
)
4026 int mask
= (1 << pin
);
4028 gpio_inout(mask
,mask
);
4031 gpio_bits(mask
,mask
);
4034 bttv_gpio_tracking(btv
,"msp34xx");
4036 printk(KERN_INFO
"bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4037 "init [%d]\n", btv
->c
.nr
, pin
);
4040 static void __devinit
boot_bt832(struct bttv
*btv
)
4044 /* ----------------------------------------------------------------------- */
4045 /* Imagenation L-Model PXC200 Framegrabber */
4046 /* This is basically the same procedure as
4047 * used by Alessandro Rubini in his pxc200
4048 * driver, but using BTTV functions */
4050 static void __devinit
init_PXC200(struct bttv
*btv
)
4052 static int vals
[] __devinitdata
= { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4053 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4059 /* Initialise GPIO-connevted stuff */
4060 gpio_inout(0xffffff, (1<<13));
4064 /* GPIO inputs are pulled up, so no need to drive
4065 * reset pin any longer */
4066 gpio_bits(0xffffff, 0);
4068 bttv_gpio_tracking(btv
,"pxc200");
4070 /* we could/should try and reset/control the AD pots? but
4071 right now we simply turned off the crushing. Without
4072 this the AGC drifts drifts
4073 remember the EN is reverse logic -->
4074 setting BT848_ADC_AGC_EN disable the AGC
4075 tboult@eecs.lehigh.edu
4078 btwrite(BT848_ADC_RESERVED
|BT848_ADC_AGC_EN
, BT848_ADC
);
4080 /* Initialise MAX517 DAC */
4081 printk(KERN_INFO
"Setting DAC reference voltage level ...\n");
4082 bttv_I2CWrite(btv
,0x5E,0,0x80,1);
4084 /* Initialise 12C508 PIC */
4085 /* The I2CWrite and I2CRead commmands are actually to the
4086 * same chips - but the R/W bit is included in the address
4087 * argument so the numbers are different */
4090 printk(KERN_INFO
"Initialising 12C508 PIC chip ...\n");
4092 /* First of all, enable the clock line. This is used in the PXC200-F */
4093 val
= btread(BT848_GPIO_DMA_CTL
);
4094 val
|= BT848_GPIO_DMA_CTL_GPCLKMODE
;
4095 btwrite(val
, BT848_GPIO_DMA_CTL
);
4097 /* Then, push to 0 the reset pin long enough to reset the *
4098 * device same as above for the reset line, but not the same
4099 * value sent to the GPIO-connected stuff
4100 * which one is the good one? */
4101 gpio_inout(0xffffff,(1<<2));
4106 for (i
= 0; i
< ARRAY_SIZE(vals
); i
++) {
4107 tmp
=bttv_I2CWrite(btv
,0x1E,0,vals
[i
],1);
4110 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4111 vals
[i
],tmp
,bttv_I2CRead(btv
,0x1F,NULL
));
4115 printk(KERN_INFO
"PXC200 Initialised.\n");
4120 /* ----------------------------------------------------------------------- */
4122 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4123 * it. This apparently involves the following procedure for each 878 chip:
4125 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4127 * 2) write to GPIO_DATA
4133 * read from GPIO_DATA into buf (uint_32)
4134 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4135 * error. ERROR_CPLD_Check_Failed stop.
4137 * 3) write to GPIO_DATA
4138 * - write 0x4400 + 0x0E
4140 * - write 0x4410 + 0x0E
4143 * read from GPIO_DATA into buf (uint_32)
4144 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4145 * error. ERROR_CPLD_Check_Failed.
4147 /* ----------------------------------------------------------------------- */
4149 init_RTV24 (struct bttv
*btv
)
4151 uint32_t dataRead
= 0;
4152 long watchdog_value
= 0x0E;
4155 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4158 btwrite (0x00c3feff, BT848_GPIO_OUT_EN
);
4160 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
4162 btwrite (0x10 + watchdog_value
, BT848_GPIO_DATA
);
4164 btwrite (0 + watchdog_value
, BT848_GPIO_DATA
);
4166 dataRead
= btread (BT848_GPIO_DATA
);
4168 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 1)) {
4170 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4171 btv
->c
.nr
, dataRead
);
4174 btwrite (0x4400 + watchdog_value
, BT848_GPIO_DATA
);
4176 btwrite (0x4410 + watchdog_value
, BT848_GPIO_DATA
);
4178 btwrite (watchdog_value
, BT848_GPIO_DATA
);
4180 dataRead
= btread (BT848_GPIO_DATA
);
4182 if ((((dataRead
>> 18) & 0x01) != 0) || (((dataRead
>> 19) & 0x01) != 0)) {
4184 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4185 btv
->c
.nr
, dataRead
);
4191 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv
->c
.nr
);
4196 /* ----------------------------------------------------------------------- */
4197 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4199 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4200 * This code is placed under the terms of the GNU General Public License
4202 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4205 static void bus_low(struct bttv
*btv
, int bit
)
4207 if (btv
->mbox_ior
) {
4208 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4209 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4216 if (btv
->mbox_ior
) {
4217 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
4222 static void bus_high(struct bttv
*btv
, int bit
)
4224 if (btv
->mbox_ior
) {
4225 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4226 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4233 if (btv
->mbox_ior
) {
4234 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
4239 static int bus_in(struct bttv
*btv
, int bit
)
4241 if (btv
->mbox_ior
) {
4242 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4243 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4246 gpio_bits(btv
->mbox_iow
| btv
->mbox_csel
, 0);
4249 return gpio_read() & (bit
);
4252 /* TEA5757 register bits */
4253 #define TEA_FREQ 0:14
4254 #define TEA_BUFFER 15:15
4256 #define TEA_SIGNAL_STRENGTH 16:17
4258 #define TEA_PORT1 18:18
4259 #define TEA_PORT0 19:19
4261 #define TEA_BAND 20:21
4262 #define TEA_BAND_FM 0
4263 #define TEA_BAND_MW 1
4264 #define TEA_BAND_LW 2
4265 #define TEA_BAND_SW 3
4267 #define TEA_MONO 22:22
4268 #define TEA_ALLOW_STEREO 0
4269 #define TEA_FORCE_MONO 1
4271 #define TEA_SEARCH_DIRECTION 23:23
4272 #define TEA_SEARCH_DOWN 0
4273 #define TEA_SEARCH_UP 1
4275 #define TEA_STATUS 24:24
4276 #define TEA_STATUS_TUNED 0
4277 #define TEA_STATUS_SEARCHING 1
4279 /* Low-level stuff */
4280 static int tea5757_read(struct bttv
*btv
)
4282 unsigned long timeout
;
4286 /* better safe than sorry */
4287 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
);
4289 if (btv
->mbox_ior
) {
4290 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4291 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4296 bttv_gpio_tracking(btv
,"tea5757 read");
4298 bus_low(btv
,btv
->mbox_we
);
4299 bus_low(btv
,btv
->mbox_clk
);
4302 timeout
= jiffies
+ msecs_to_jiffies(1000);
4304 /* wait for DATA line to go low; error if it doesn't */
4305 while (bus_in(btv
,btv
->mbox_data
) && time_before(jiffies
, timeout
))
4307 if (bus_in(btv
,btv
->mbox_data
)) {
4308 printk(KERN_WARNING
"bttv%d: tea5757: read timeout\n",btv
->c
.nr
);
4312 dprintk("bttv%d: tea5757:",btv
->c
.nr
);
4313 for (i
= 0; i
< 24; i
++) {
4315 bus_high(btv
,btv
->mbox_clk
);
4317 dprintk("%c",(bus_in(btv
,btv
->mbox_most
) == 0)?'T':'-');
4318 bus_low(btv
,btv
->mbox_clk
);
4320 value
|= (bus_in(btv
,btv
->mbox_data
) == 0)?0:1; /* MSB first */
4321 dprintk("%c", (bus_in(btv
,btv
->mbox_most
) == 0)?'S':'M');
4323 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv
->c
.nr
, value
);
4327 static int tea5757_write(struct bttv
*btv
, int value
)
4332 gpio_inout(btv
->mbox_mask
, btv
->mbox_clk
| btv
->mbox_we
| btv
->mbox_data
);
4334 if (btv
->mbox_ior
) {
4335 gpio_bits(btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
,
4336 btv
->mbox_ior
| btv
->mbox_iow
| btv
->mbox_csel
);
4340 bttv_gpio_tracking(btv
,"tea5757 write");
4342 dprintk("bttv%d: tea5757: write 0x%X\n", btv
->c
.nr
, value
);
4343 bus_low(btv
,btv
->mbox_clk
);
4344 bus_high(btv
,btv
->mbox_we
);
4345 for (i
= 0; i
< 25; i
++) {
4346 if (reg
& 0x1000000)
4347 bus_high(btv
,btv
->mbox_data
);
4349 bus_low(btv
,btv
->mbox_data
);
4351 bus_high(btv
,btv
->mbox_clk
);
4353 bus_low(btv
,btv
->mbox_clk
);
4356 bus_low(btv
,btv
->mbox_we
); /* unmute !!! */
4360 void tea5757_set_freq(struct bttv
*btv
, unsigned short freq
)
4362 dprintk("tea5757_set_freq %d\n",freq
);
4363 tea5757_write(btv
, 5 * freq
+ 0x358); /* add 10.7MHz (see docs) */
4366 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4368 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4369 * switch instead (CD22M3494E). This IC can have multiple active connections
4370 * between Xn (input) and Yn (output) pins. We need to clear any existing
4371 * connection prior to establish a new one, pulsing the STROBE pin.
4373 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4374 * GPIO pins are wired as:
4375 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4376 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4377 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4378 * GPIO[8] - - P3[5] (microcontroller)
4379 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4380 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4381 * GPINTR - - P3[4] (microcontroller)
4383 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4384 * configuration either directly (as we are doing) or using the microcontroller
4385 * which is also wired to I2C interface. I have no further info on the
4386 * microcontroller features, one would need to disassembly the firmware.
4387 * note: the vendor refused to give any information on this product, all
4388 * that stuff was found using a multimeter! :)
4390 static void rv605_muxsel(struct bttv
*btv
, unsigned int input
)
4392 /* reset all conections */
4393 gpio_bits(0x200,0x200);
4395 gpio_bits(0x200,0x000);
4398 /* create a new connection */
4399 gpio_bits(0x480,0x080);
4400 gpio_bits(0x480,0x480);
4402 gpio_bits(0x480,0x080);
4406 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4408 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4409 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4410 * chips, ten eight input analog multiplexors, a not chip and a few
4413 * 16 inputs on a secondary bracket are provided and can be selected
4414 * from each of the four capture chips. Two of the eight input
4415 * multiplexors are used to select from any of the 16 input signals.
4417 * Unsupported hardware capabilities:
4418 * . A video output monitor on the secondary bracket can be selected from
4419 * one of the 878A chips.
4420 * . Another passthrough but I haven't spent any time investigating it.
4421 * . Digital I/O (logic level connected to GPIO) is available from an
4424 * The on chip input mux should always be set to 2.
4425 * GPIO[16:19] - Video input selection
4426 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4427 * GPIO[?:?] - Digital I/O.
4429 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4430 * determined what function (if any) it provides. With the microcontroller
4431 * and sync seperator chips a guess is that it might have to do with video
4432 * switching and maybe some digital I/O.
4434 static void tibetCS16_muxsel(struct bttv
*btv
, unsigned int input
)
4437 gpio_bits(0x0f0000, input
<< 16);
4440 static void tibetCS16_init(struct bttv
*btv
)
4442 /* enable gpio bits, mask obtained via btSpy */
4443 gpio_inout(0xffffff, 0x0f7fff);
4444 gpio_write(0x0f7fff);
4448 * The following routines for the Kodicom-4400r get a little mind-twisting.
4449 * There is a "master" controller and three "slave" controllers, together
4450 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4451 * The analog switch is controlled by the "master", but the detection order
4452 * of the four BT878A chips is in an order which I just don't understand.
4453 * The "master" is actually the second controller to be detected. The
4454 * logic on the board uses logical numbers for the 4 controllers, but
4455 * those numbers are different from the detection sequence. When working
4456 * with the analog switch, we need to "map" from the detection sequence
4457 * over to the board's logical controller number. This mapping sequence
4458 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4459 * unit 3, the second (which is the master) is logical unit 0, etc.
4460 * We need to maintain the status of the analog switch (which of the 16
4461 * cameras is connected to which of the 4 controllers). Rather than
4462 * add to the bttv structure for this, we use the data reserved for
4463 * the mbox (unused for this card type).
4467 * First a routine to set the analog switch, which controls which camera
4468 * is routed to which controller. The switch comprises an X-address
4469 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4470 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4471 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4472 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4473 * specified address. The idea is to set the address and data, then bring
4474 * STROBE high, and finally bring STROBE back to low.
4476 static void kodicom4400r_write(struct bttv
*btv
,
4477 unsigned char xaddr
,
4478 unsigned char yaddr
,
4479 unsigned char data
) {
4482 udata
= (data
<< 7) | ((yaddr
&3) << 4) | (xaddr
&0xf);
4483 gpio_bits(0x1ff, udata
); /* write ADDR and DAT */
4484 gpio_bits(0x1ff, udata
| (1 << 8)); /* strobe high */
4485 gpio_bits(0x1ff, udata
); /* strobe low */
4489 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4490 * use this routine. The routine finds the "master" for the card, maps
4491 * the controller number from the detected position over to the logical
4492 * number, writes the appropriate data to the analog switch, and housekeeps
4493 * the local copy of the switch information. The parameter 'input' is the
4494 * requested camera number (0 - 15).
4496 static void kodicom4400r_muxsel(struct bttv
*btv
, unsigned int input
)
4501 static unsigned char map
[4] = {3, 0, 2, 1};
4503 mctlr
= master
[btv
->c
.nr
];
4504 if (mctlr
== NULL
) { /* ignore if master not yet detected */
4507 yaddr
= (btv
->c
.nr
- mctlr
->c
.nr
+ 1) & 3; /* the '&' is for safety */
4509 sw_status
= (char *)(&mctlr
->mbox_we
);
4510 xaddr
= input
& 0xf;
4511 /* Check if the controller/camera pair has changed, else ignore */
4512 if (sw_status
[yaddr
] != xaddr
)
4514 /* "open" the old switch, "close" the new one, save the new */
4515 kodicom4400r_write(mctlr
, sw_status
[yaddr
], yaddr
, 0);
4516 sw_status
[yaddr
] = xaddr
;
4517 kodicom4400r_write(mctlr
, xaddr
, yaddr
, 1);
4522 * During initialisation, we need to reset the analog switch. We
4523 * also preset the switch to map the 4 connectors on the card to the
4524 * *user's* (see above description of kodicom4400r_muxsel) channels
4527 static void kodicom4400r_init(struct bttv
*btv
)
4529 char *sw_status
= (char *)(&btv
->mbox_we
);
4532 gpio_inout(0x0003ff, 0x0003ff);
4533 gpio_write(1 << 9); /* reset MUX */
4535 /* Preset camera 0 to the 4 controllers */
4536 for (ix
= 0; ix
< 4; ix
++) {
4538 kodicom4400r_write(btv
, ix
, ix
, 1);
4541 * Since this is the "master", we need to set up the
4542 * other three controller chips' pointers to this structure
4543 * for later use in the muxsel routine.
4545 if ((btv
->c
.nr
<1) || (btv
->c
.nr
>BTTV_MAX
-3))
4547 master
[btv
->c
.nr
-1] = btv
;
4548 master
[btv
->c
.nr
] = btv
;
4549 master
[btv
->c
.nr
+1] = btv
;
4550 master
[btv
->c
.nr
+2] = btv
;
4553 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4554 * video multiplexers to provide up to 16 video inputs. These
4555 * multiplexers are controlled by the lower 8 GPIO pins of the
4556 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4558 * xxx0 is pin xxx of multiplexer U5,
4559 * yyy1 is pin yyy of multiplexer U2
4571 static void xguard_muxsel(struct bttv
*btv
, unsigned int input
)
4573 static const int masks
[] = {
4574 ENB0
, ENB0
|IN00
, ENB0
|IN10
, ENB0
|IN00
|IN10
,
4575 ENA0
, ENA0
|IN00
, ENA0
|IN10
, ENA0
|IN00
|IN10
,
4576 ENB1
, ENB1
|IN01
, ENB1
|IN11
, ENB1
|IN01
|IN11
,
4577 ENA1
, ENA1
|IN01
, ENA1
|IN11
, ENA1
|IN01
|IN11
,
4579 gpio_write(masks
[input
%16]);
4581 static void picolo_tetra_init(struct bttv
*btv
)
4583 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4584 btwrite (0x08<<16,BT848_GPIO_DATA
);/*GPIO[19] [==> 4053 B+C] set to 1 */
4585 btwrite (0x04<<16,BT848_GPIO_DATA
);/*GPIO[18] [==> 4053 A] set to 1*/
4587 static void picolo_tetra_muxsel (struct bttv
* btv
, unsigned int input
)
4590 dprintk (KERN_DEBUG
"bttv%d : picolo_tetra_muxsel => input = %d\n",btv
->c
.nr
,input
);
4591 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4592 /*GPIO[20]&GPIO[21] used to choose the right input*/
4593 btwrite (input
<<20,BT848_GPIO_DATA
);
4598 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4600 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4601 * swichers to provide 16 channels to MUX0. The TDA8540's have
4602 * 4 independent outputs and as such the IVC120G also has the
4603 * optional "Monitor Out" bus. This allows the card to be looking
4604 * at one input while the monitor is looking at another.
4606 * Since I've couldn't be bothered figuring out how to add an
4607 * independant muxsel for the monitor bus, I've just set it to
4608 * whatever the card is looking at.
4610 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4611 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4613 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4614 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4615 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4616 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4620 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4621 #define I2C_TDA8540 0x90
4622 #define I2C_TDA8540_ALT1 0x92
4623 #define I2C_TDA8540_ALT2 0x94
4624 #define I2C_TDA8540_ALT3 0x96
4625 #define I2C_TDA8540_ALT4 0x98
4626 #define I2C_TDA8540_ALT5 0x9a
4627 #define I2C_TDA8540_ALT6 0x9c
4629 static void ivc120_muxsel(struct bttv
*btv
, unsigned int input
)
4632 int key
= input
% 4;
4633 int matrix
= input
/ 4;
4635 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4636 btv
->c
.nr
, input
, matrix
, key
);
4638 /* Handles the input selection on the TDA8540's */
4639 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x00,
4640 ((matrix
== 3) ? (key
| key
<< 2) : 0x00), 1);
4641 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x00,
4642 ((matrix
== 0) ? (key
| key
<< 2) : 0x00), 1);
4643 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x00,
4644 ((matrix
== 1) ? (key
| key
<< 2) : 0x00), 1);
4645 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x00,
4646 ((matrix
== 2) ? (key
| key
<< 2) : 0x00), 1);
4648 /* Handles the output enables on the TDA8540's */
4649 bttv_I2CWrite(btv
, I2C_TDA8540_ALT3
, 0x02,
4650 ((matrix
== 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4651 bttv_I2CWrite(btv
, I2C_TDA8540_ALT4
, 0x02,
4652 ((matrix
== 0) ? 0x03 : 0x00), 1); /* 1-4 */
4653 bttv_I2CWrite(btv
, I2C_TDA8540_ALT5
, 0x02,
4654 ((matrix
== 1) ? 0x03 : 0x00), 1); /* 5-8 */
4655 bttv_I2CWrite(btv
, I2C_TDA8540_ALT6
, 0x02,
4656 ((matrix
== 2) ? 0x03 : 0x00), 1); /* 9-12 */
4658 /* Selects MUX0 for input on the 878 */
4659 btaor((0)<<5, ~(3<<5), BT848_IFORM
);
4663 /* PXC200 muxsel helper
4664 * luke@syseng.anu.edu.au
4665 * another transplant
4666 * from Alessandro Rubini (rubini@linux.it)
4668 * There are 4 kinds of cards:
4669 * PXC200L which is bt848
4670 * PXC200F which is bt848 with PIC controlling mux
4671 * PXC200AL which is bt878
4672 * PXC200AF which is bt878 with PIC controlling mux
4674 #define PX_CFG_PXC200F 0x01
4675 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4676 #define PX_I2C_PIC 0x0f
4677 #define PX_PXC200A_CARDID 0x200a1295
4678 #define PX_I2C_CMD_CFG 0x00
4680 static void PXC200_muxsel(struct bttv
*btv
, unsigned int input
)
4685 unsigned char buf
[2];
4687 /* Read PIC config to determine if this is a PXC200F */
4691 rc
=bttv_I2CWrite(btv
,(PX_I2C_PIC
<<1),buf
[0],buf
[1],1);
4693 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv
->c
.nr
,rc
);
4694 /* not PXC ? do nothing */
4698 rc
=bttv_I2CRead(btv
,(PX_I2C_PIC
<<1),NULL
);
4699 if (!(rc
& PX_CFG_PXC200F
)) {
4700 printk(KERN_DEBUG
"bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv
->c
.nr
,rc
);
4705 /* The multiplexer in the 200F is handled by the GPIO port */
4706 /* get correct mapping between inputs */
4707 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4708 /* ** not needed!? */
4711 /* make sure output pins are enabled */
4712 /* bitmask=0x30f; */
4714 /* check whether we have a PXC200A */
4715 if (btv
->cardid
== PX_PXC200A_CARDID
) {
4716 bitmask
^= 0x180; /* use 7 and 9, not 8 and 9 */
4717 bitmask
|= 7<<4; /* the DAC */
4719 btwrite(bitmask
, BT848_GPIO_OUT_EN
);
4721 bitmask
= btread(BT848_GPIO_DATA
);
4722 if (btv
->cardid
== PX_PXC200A_CARDID
)
4723 bitmask
= (bitmask
& ~0x280) | ((mux
& 2) << 8) | ((mux
& 1) << 7);
4724 else /* older device */
4725 bitmask
= (bitmask
& ~0x300) | ((mux
& 3) << 8);
4726 btwrite(bitmask
,BT848_GPIO_DATA
);
4729 * Was "to be safe, set the bt848 to input 0"
4730 * Actually, since it's ok at load time, better not messing
4731 * with these bits (on PXC200AF you need to set mux 2 here)
4733 * needed because bttv-driver sets mux before calling this function
4735 if (btv
->cardid
== PX_PXC200A_CARDID
)
4736 btaor(2<<5, ~BT848_IFORM_MUXSEL
, BT848_IFORM
);
4737 else /* older device */
4738 btand(~BT848_IFORM_MUXSEL
,BT848_IFORM
);
4740 printk(KERN_DEBUG
"bttv%d: setting input channel to:%d\n", btv
->c
.nr
,(int)mux
);
4743 /* ----------------------------------------------------------------------- */
4744 /* motherboard chipset specific stuff */
4746 void __init
bttv_check_chipset(void)
4748 int pcipci_fail
= 0;
4749 struct pci_dev
*dev
= NULL
;
4751 if (pci_pci_problems
& (PCIPCI_FAIL
|PCIAGP_FAIL
)) /* should check if target is AGP */
4753 if (pci_pci_problems
& (PCIPCI_TRITON
|PCIPCI_NATOMA
|PCIPCI_VIAETBF
))
4755 if (pci_pci_problems
& PCIPCI_VSFX
)
4757 #ifdef PCIPCI_ALIMAGIK
4758 if (pci_pci_problems
& PCIPCI_ALIMAGIK
)
4763 /* print warnings about any quirks found */
4765 printk(KERN_INFO
"bttv: Host bridge needs ETBF enabled.\n");
4767 printk(KERN_INFO
"bttv: Host bridge needs VSFX enabled.\n");
4769 printk(KERN_INFO
"bttv: bttv and your chipset may not work "
4772 printk(KERN_INFO
"bttv: overlay will be disabled.\n");
4775 printk(KERN_INFO
"bttv: overlay forced. Use this "
4776 "option at your own risk.\n");
4779 if (UNSET
!= latency
)
4780 printk(KERN_INFO
"bttv: pci latency fixup [%d]\n",latency
);
4781 while ((dev
= pci_get_device(PCI_VENDOR_ID_INTEL
,
4782 PCI_DEVICE_ID_INTEL_82441
, dev
))) {
4784 pci_read_config_byte(dev
, 0x53, &b
);
4786 printk(KERN_INFO
"bttv: Host bridge: 82441FX Natoma, "
4787 "bufcon=0x%02x\n",b
);
4791 int __devinit
bttv_handle_chipset(struct bttv
*btv
)
4793 unsigned char command
;
4795 if (!triton1
&& !vsfx
&& UNSET
== latency
)
4800 printk(KERN_INFO
"bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv
->c
.nr
);
4801 if (vsfx
&& btv
->id
>= 878)
4802 printk(KERN_INFO
"bttv%d: enabling VSFX\n",btv
->c
.nr
);
4803 if (UNSET
!= latency
)
4804 printk(KERN_INFO
"bttv%d: setting pci timer to %d\n",
4808 if (btv
->id
< 878) {
4809 /* bt848 (mis)uses a bit in the irq mask for etbf */
4811 btv
->triton1
= BT848_INT_ETBF
;
4813 /* bt878 has a bit in the pci config space for it */
4814 pci_read_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, &command
);
4816 command
|= BT878_EN_TBFX
;
4818 command
|= BT878_EN_VSFX
;
4819 pci_write_config_byte(btv
->c
.pci
, BT878_DEVCTRL
, command
);
4821 if (UNSET
!= latency
)
4822 pci_write_config_byte(btv
->c
.pci
, PCI_LATENCY_TIMER
, latency
);