?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ASoC: Intel: Skylake: Add MCLK configuration
[linux-2.6/btrfs-unstable.git] / drivers / tty / synclink.c
blob6188059fd523991c4a5072c0b8350f4d31b00dfd
1 /*
2 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink ISA and PCI
5 * high speed multiprotocol serial adapters.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 *
14 * Original release 01/11/99
15 *
16 * This code is released under the GNU General Public License (GPL)
17 *
18 * This driver is primarily intended for use in synchronous
19 * HDLC mode. Asynchronous mode is also provided.
20 *
21 * When operating in synchronous mode, each call to mgsl_write()
22 * contains exactly one complete HDLC frame. Calling mgsl_put_char
23 * will start assembling an HDLC frame that will not be sent until
24 * mgsl_flush_chars or mgsl_write is called.
25 *
26 * Synchronous receive data is reported as complete frames. To accomplish
27 * this, the TTY flip buffer is bypassed (too small to hold largest
28 * frame and may fragment frames) and the line discipline
29 * receive entry point is called directly.
30 *
31 * This driver has been tested with a slightly modified ppp.c driver
32 * for synchronous PPP.
33 *
34 * 2000/02/16
35 * Added interface for syncppp.c driver (an alternate synchronous PPP
36 * implementation that also supports Cisco HDLC). Each device instance
37 * registers as a tty device AND a network device (if dosyncppp option
38 * is set for the device). The functionality is determined by which
39 * device interface is opened.
40 *
41 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
42 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
43 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
44 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
45 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
46 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
47 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
49 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
50 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
51 * OF THE POSSIBILITY OF SUCH DAMAGE.
52 */
53
54 #if defined(__i386__)
55 # define BREAKPOINT() asm(" int $3");
56 #else
57 # define BREAKPOINT() { }
58 #endif
59
60 #define MAX_ISA_DEVICES 10
61 #define MAX_PCI_DEVICES 10
62 #define MAX_TOTAL_DEVICES 20
63
64 #include <linux/module.h>
65 #include <linux/errno.h>
66 #include <linux/signal.h>
67 #include <linux/sched.h>
68 #include <linux/timer.h>
69 #include <linux/interrupt.h>
70 #include <linux/pci.h>
71 #include <linux/tty.h>
72 #include <linux/tty_flip.h>
73 #include <linux/serial.h>
74 #include <linux/major.h>
75 #include <linux/string.h>
76 #include <linux/fcntl.h>
77 #include <linux/ptrace.h>
78 #include <linux/ioport.h>
79 #include <linux/mm.h>
80 #include <linux/seq_file.h>
81 #include <linux/slab.h>
82 #include <linux/delay.h>
83 #include <linux/netdevice.h>
84 #include <linux/vmalloc.h>
85 #include <linux/init.h>
86 #include <linux/ioctl.h>
87 #include <linux/synclink.h>
88
89 #include <asm/io.h>
90 #include <asm/irq.h>
91 #include <asm/dma.h>
92 #include <linux/bitops.h>
93 #include <asm/types.h>
94 #include <linux/termios.h>
95 #include <linux/workqueue.h>
96 #include <linux/hdlc.h>
97 #include <linux/dma-mapping.h>
98
99 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
100 #define SYNCLINK_GENERIC_HDLC 1
101 #else
102 #define SYNCLINK_GENERIC_HDLC 0
103 #endif
104
105 #define GET_USER(error,value,addr) error = get_user(value,addr)
106 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
107 #define PUT_USER(error,value,addr) error = put_user(value,addr)
108 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
109
110 #include <asm/uaccess.h>
111
112 #define RCLRVALUE 0xffff
113
114 static MGSL_PARAMS default_params = {
115 MGSL_MODE_HDLC, /* unsigned long mode */
116 0, /* unsigned char loopback; */
117 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
118 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
119 0, /* unsigned long clock_speed; */
120 0xff, /* unsigned char addr_filter; */
121 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
122 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
123 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
124 9600, /* unsigned long data_rate; */
125 8, /* unsigned char data_bits; */
126 1, /* unsigned char stop_bits; */
127 ASYNC_PARITY_NONE /* unsigned char parity; */
128 };
129
130 #define SHARED_MEM_ADDRESS_SIZE 0x40000
131 #define BUFFERLISTSIZE 4096
132 #define DMABUFFERSIZE 4096
133 #define MAXRXFRAMES 7
134
135 typedef struct _DMABUFFERENTRY
136 {
137 u32 phys_addr; /* 32-bit flat physical address of data buffer */
138 volatile u16 count; /* buffer size/data count */
139 volatile u16 status; /* Control/status field */
140 volatile u16 rcc; /* character count field */
141 u16 reserved; /* padding required by 16C32 */
142 u32 link; /* 32-bit flat link to next buffer entry */
143 char *virt_addr; /* virtual address of data buffer */
144 u32 phys_entry; /* physical address of this buffer entry */
145 dma_addr_t dma_addr;
146 } DMABUFFERENTRY, *DMAPBUFFERENTRY;
147
148 /* The queue of BH actions to be performed */
149
150 #define BH_RECEIVE 1
151 #define BH_TRANSMIT 2
152 #define BH_STATUS 4
153
154 #define IO_PIN_SHUTDOWN_LIMIT 100
155
156 struct _input_signal_events {
157 int ri_up;
158 int ri_down;
159 int dsr_up;
160 int dsr_down;
161 int dcd_up;
162 int dcd_down;
163 int cts_up;
164 int cts_down;
165 };
166
167 /* transmit holding buffer definitions*/
168 #define MAX_TX_HOLDING_BUFFERS 5
169 struct tx_holding_buffer {
170 int buffer_size;
171 unsigned char * buffer;
172 };
173
174
175 /*
176 * Device instance data structure
177 */
178
179 struct mgsl_struct {
180 int magic;
181 struct tty_port port;
182 int line;
183 int hw_version;
184
185 struct mgsl_icount icount;
186
187 int timeout;
188 int x_char; /* xon/xoff character */
189 u16 read_status_mask;
190 u16 ignore_status_mask;
191 unsigned char *xmit_buf;
192 int xmit_head;
193 int xmit_tail;
194 int xmit_cnt;
195
196 wait_queue_head_t status_event_wait_q;
197 wait_queue_head_t event_wait_q;
198 struct timer_list tx_timer; /* HDLC transmit timeout timer */
199 struct mgsl_struct *next_device; /* device list link */
200
201 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
202 struct work_struct task; /* task structure for scheduling bh */
203
204 u32 EventMask; /* event trigger mask */
205 u32 RecordedEvents; /* pending events */
206
207 u32 max_frame_size; /* as set by device config */
208
209 u32 pending_bh;
210
211 bool bh_running; /* Protection from multiple */
212 int isr_overflow;
213 bool bh_requested;
214
215 int dcd_chkcount; /* check counts to prevent */
216 int cts_chkcount; /* too many IRQs if a signal */
217 int dsr_chkcount; /* is floating */
218 int ri_chkcount;
219
220 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
221 u32 buffer_list_phys;
222 dma_addr_t buffer_list_dma_addr;
223
224 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
225 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
226 unsigned int current_rx_buffer;
227
228 int num_tx_dma_buffers; /* number of tx dma frames required */
229 int tx_dma_buffers_used;
230 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
231 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
232 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
233 int current_tx_buffer; /* next tx dma buffer to be loaded */
234
235 unsigned char *intermediate_rxbuffer;
236
237 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
238 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
239 int put_tx_holding_index; /* next tx holding buffer to store user request */
240 int tx_holding_count; /* number of tx holding buffers waiting */
241 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
242
243 bool rx_enabled;
244 bool rx_overflow;
245 bool rx_rcc_underrun;
246
247 bool tx_enabled;
248 bool tx_active;
249 u32 idle_mode;
250
251 u16 cmr_value;
252 u16 tcsr_value;
253
254 char device_name[25]; /* device instance name */
255
256 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
257 unsigned char bus; /* expansion bus number (zero based) */
258 unsigned char function; /* PCI device number */
259
260 unsigned int io_base; /* base I/O address of adapter */
261 unsigned int io_addr_size; /* size of the I/O address range */
262 bool io_addr_requested; /* true if I/O address requested */
263
264 unsigned int irq_level; /* interrupt level */
265 unsigned long irq_flags;
266 bool irq_requested; /* true if IRQ requested */
267
268 unsigned int dma_level; /* DMA channel */
269 bool dma_requested; /* true if dma channel requested */
270
271 u16 mbre_bit;
272 u16 loopback_bits;
273 u16 usc_idle_mode;
274
275 MGSL_PARAMS params; /* communications parameters */
276
277 unsigned char serial_signals; /* current serial signal states */
278
279 bool irq_occurred; /* for diagnostics use */
280 unsigned int init_error; /* Initialization startup error (DIAGS) */
281 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
282
283 u32 last_mem_alloc;
284 unsigned char* memory_base; /* shared memory address (PCI only) */
285 u32 phys_memory_base;
286 bool shared_mem_requested;
287
288 unsigned char* lcr_base; /* local config registers (PCI only) */
289 u32 phys_lcr_base;
290 u32 lcr_offset;
291 bool lcr_mem_requested;
292
293 u32 misc_ctrl_value;
294 char *flag_buf;
295 bool drop_rts_on_tx_done;
296
297 bool loopmode_insert_requested;
298 bool loopmode_send_done_requested;
299
300 struct _input_signal_events input_signal_events;
301
302 /* generic HDLC device parts */
303 int netcount;
304 spinlock_t netlock;
305
306 #if SYNCLINK_GENERIC_HDLC
307 struct net_device *netdev;
308 #endif
309 };
310
311 #define MGSL_MAGIC 0x5401
312
313 /*
314 * The size of the serial xmit buffer is 1 page, or 4096 bytes
315 */
316 #ifndef SERIAL_XMIT_SIZE
317 #define SERIAL_XMIT_SIZE 4096
318 #endif
319
320 /*
321 * These macros define the offsets used in calculating the
322 * I/O address of the specified USC registers.
323 */
324
325
326 #define DCPIN 2 /* Bit 1 of I/O address */
327 #define SDPIN 4 /* Bit 2 of I/O address */
328
329 #define DCAR 0 /* DMA command/address register */
330 #define CCAR SDPIN /* channel command/address register */
331 #define DATAREG DCPIN + SDPIN /* serial data register */
332 #define MSBONLY 0x41
333 #define LSBONLY 0x40
334
335 /*
336 * These macros define the register address (ordinal number)
337 * used for writing address/value pairs to the USC.
338 */
339
340 #define CMR 0x02 /* Channel mode Register */
341 #define CCSR 0x04 /* Channel Command/status Register */
342 #define CCR 0x06 /* Channel Control Register */
343 #define PSR 0x08 /* Port status Register */
344 #define PCR 0x0a /* Port Control Register */
345 #define TMDR 0x0c /* Test mode Data Register */
346 #define TMCR 0x0e /* Test mode Control Register */
347 #define CMCR 0x10 /* Clock mode Control Register */
348 #define HCR 0x12 /* Hardware Configuration Register */
349 #define IVR 0x14 /* Interrupt Vector Register */
350 #define IOCR 0x16 /* Input/Output Control Register */
351 #define ICR 0x18 /* Interrupt Control Register */
352 #define DCCR 0x1a /* Daisy Chain Control Register */
353 #define MISR 0x1c /* Misc Interrupt status Register */
354 #define SICR 0x1e /* status Interrupt Control Register */
355 #define RDR 0x20 /* Receive Data Register */
356 #define RMR 0x22 /* Receive mode Register */
357 #define RCSR 0x24 /* Receive Command/status Register */
358 #define RICR 0x26 /* Receive Interrupt Control Register */
359 #define RSR 0x28 /* Receive Sync Register */
360 #define RCLR 0x2a /* Receive count Limit Register */
361 #define RCCR 0x2c /* Receive Character count Register */
362 #define TC0R 0x2e /* Time Constant 0 Register */
363 #define TDR 0x30 /* Transmit Data Register */
364 #define TMR 0x32 /* Transmit mode Register */
365 #define TCSR 0x34 /* Transmit Command/status Register */
366 #define TICR 0x36 /* Transmit Interrupt Control Register */
367 #define TSR 0x38 /* Transmit Sync Register */
368 #define TCLR 0x3a /* Transmit count Limit Register */
369 #define TCCR 0x3c /* Transmit Character count Register */
370 #define TC1R 0x3e /* Time Constant 1 Register */
371
372
373 /*
374 * MACRO DEFINITIONS FOR DMA REGISTERS
375 */
376
377 #define DCR 0x06 /* DMA Control Register (shared) */
378 #define DACR 0x08 /* DMA Array count Register (shared) */
379 #define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
380 #define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
381 #define DICR 0x18 /* DMA Interrupt Control Register (shared) */
382 #define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
383 #define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
384
385 #define TDMR 0x02 /* Transmit DMA mode Register */
386 #define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
387 #define TBCR 0x2a /* Transmit Byte count Register */
388 #define TARL 0x2c /* Transmit Address Register (low) */
389 #define TARU 0x2e /* Transmit Address Register (high) */
390 #define NTBCR 0x3a /* Next Transmit Byte count Register */
391 #define NTARL 0x3c /* Next Transmit Address Register (low) */
392 #define NTARU 0x3e /* Next Transmit Address Register (high) */
393
394 #define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
395 #define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
396 #define RBCR 0xaa /* Receive Byte count Register */
397 #define RARL 0xac /* Receive Address Register (low) */
398 #define RARU 0xae /* Receive Address Register (high) */
399 #define NRBCR 0xba /* Next Receive Byte count Register */
400 #define NRARL 0xbc /* Next Receive Address Register (low) */
401 #define NRARU 0xbe /* Next Receive Address Register (high) */
402
403
404 /*
405 * MACRO DEFINITIONS FOR MODEM STATUS BITS
406 */
407
408 #define MODEMSTATUS_DTR 0x80
409 #define MODEMSTATUS_DSR 0x40
410 #define MODEMSTATUS_RTS 0x20
411 #define MODEMSTATUS_CTS 0x10
412 #define MODEMSTATUS_RI 0x04
413 #define MODEMSTATUS_DCD 0x01
414
415
416 /*
417 * Channel Command/Address Register (CCAR) Command Codes
418 */
419
420 #define RTCmd_Null 0x0000
421 #define RTCmd_ResetHighestIus 0x1000
422 #define RTCmd_TriggerChannelLoadDma 0x2000
423 #define RTCmd_TriggerRxDma 0x2800
424 #define RTCmd_TriggerTxDma 0x3000
425 #define RTCmd_TriggerRxAndTxDma 0x3800
426 #define RTCmd_PurgeRxFifo 0x4800
427 #define RTCmd_PurgeTxFifo 0x5000
428 #define RTCmd_PurgeRxAndTxFifo 0x5800
429 #define RTCmd_LoadRcc 0x6800
430 #define RTCmd_LoadTcc 0x7000
431 #define RTCmd_LoadRccAndTcc 0x7800
432 #define RTCmd_LoadTC0 0x8800
433 #define RTCmd_LoadTC1 0x9000
434 #define RTCmd_LoadTC0AndTC1 0x9800
435 #define RTCmd_SerialDataLSBFirst 0xa000
436 #define RTCmd_SerialDataMSBFirst 0xa800
437 #define RTCmd_SelectBigEndian 0xb000
438 #define RTCmd_SelectLittleEndian 0xb800
439
440
441 /*
442 * DMA Command/Address Register (DCAR) Command Codes
443 */
444
445 #define DmaCmd_Null 0x0000
446 #define DmaCmd_ResetTxChannel 0x1000
447 #define DmaCmd_ResetRxChannel 0x1200
448 #define DmaCmd_StartTxChannel 0x2000
449 #define DmaCmd_StartRxChannel 0x2200
450 #define DmaCmd_ContinueTxChannel 0x3000
451 #define DmaCmd_ContinueRxChannel 0x3200
452 #define DmaCmd_PauseTxChannel 0x4000
453 #define DmaCmd_PauseRxChannel 0x4200
454 #define DmaCmd_AbortTxChannel 0x5000
455 #define DmaCmd_AbortRxChannel 0x5200
456 #define DmaCmd_InitTxChannel 0x7000
457 #define DmaCmd_InitRxChannel 0x7200
458 #define DmaCmd_ResetHighestDmaIus 0x8000
459 #define DmaCmd_ResetAllChannels 0x9000
460 #define DmaCmd_StartAllChannels 0xa000
461 #define DmaCmd_ContinueAllChannels 0xb000
462 #define DmaCmd_PauseAllChannels 0xc000
463 #define DmaCmd_AbortAllChannels 0xd000
464 #define DmaCmd_InitAllChannels 0xf000
465
466 #define TCmd_Null 0x0000
467 #define TCmd_ClearTxCRC 0x2000
468 #define TCmd_SelectTicrTtsaData 0x4000
469 #define TCmd_SelectTicrTxFifostatus 0x5000
470 #define TCmd_SelectTicrIntLevel 0x6000
471 #define TCmd_SelectTicrdma_level 0x7000
472 #define TCmd_SendFrame 0x8000
473 #define TCmd_SendAbort 0x9000
474 #define TCmd_EnableDleInsertion 0xc000
475 #define TCmd_DisableDleInsertion 0xd000
476 #define TCmd_ClearEofEom 0xe000
477 #define TCmd_SetEofEom 0xf000
478
479 #define RCmd_Null 0x0000
480 #define RCmd_ClearRxCRC 0x2000
481 #define RCmd_EnterHuntmode 0x3000
482 #define RCmd_SelectRicrRtsaData 0x4000
483 #define RCmd_SelectRicrRxFifostatus 0x5000
484 #define RCmd_SelectRicrIntLevel 0x6000
485 #define RCmd_SelectRicrdma_level 0x7000
486
487 /*
488 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
489 */
490
491 #define RECEIVE_STATUS BIT5
492 #define RECEIVE_DATA BIT4
493 #define TRANSMIT_STATUS BIT3
494 #define TRANSMIT_DATA BIT2
495 #define IO_PIN BIT1
496 #define MISC BIT0
497
498
499 /*
500 * Receive status Bits in Receive Command/status Register RCSR
501 */
502
503 #define RXSTATUS_SHORT_FRAME BIT8
504 #define RXSTATUS_CODE_VIOLATION BIT8
505 #define RXSTATUS_EXITED_HUNT BIT7
506 #define RXSTATUS_IDLE_RECEIVED BIT6
507 #define RXSTATUS_BREAK_RECEIVED BIT5
508 #define RXSTATUS_ABORT_RECEIVED BIT5
509 #define RXSTATUS_RXBOUND BIT4
510 #define RXSTATUS_CRC_ERROR BIT3
511 #define RXSTATUS_FRAMING_ERROR BIT3
512 #define RXSTATUS_ABORT BIT2
513 #define RXSTATUS_PARITY_ERROR BIT2
514 #define RXSTATUS_OVERRUN BIT1
515 #define RXSTATUS_DATA_AVAILABLE BIT0
516 #define RXSTATUS_ALL 0x01f6
517 #define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
518
519 /*
520 * Values for setting transmit idle mode in
521 * Transmit Control/status Register (TCSR)
522 */
523 #define IDLEMODE_FLAGS 0x0000
524 #define IDLEMODE_ALT_ONE_ZERO 0x0100
525 #define IDLEMODE_ZERO 0x0200
526 #define IDLEMODE_ONE 0x0300
527 #define IDLEMODE_ALT_MARK_SPACE 0x0500
528 #define IDLEMODE_SPACE 0x0600
529 #define IDLEMODE_MARK 0x0700
530 #define IDLEMODE_MASK 0x0700
531
532 /*
533 * IUSC revision identifiers
534 */
535 #define IUSC_SL1660 0x4d44
536 #define IUSC_PRE_SL1660 0x4553
537
538 /*
539 * Transmit status Bits in Transmit Command/status Register (TCSR)
540 */
541
542 #define TCSR_PRESERVE 0x0F00
543
544 #define TCSR_UNDERWAIT BIT11
545 #define TXSTATUS_PREAMBLE_SENT BIT7
546 #define TXSTATUS_IDLE_SENT BIT6
547 #define TXSTATUS_ABORT_SENT BIT5
548 #define TXSTATUS_EOF_SENT BIT4
549 #define TXSTATUS_EOM_SENT BIT4
550 #define TXSTATUS_CRC_SENT BIT3
551 #define TXSTATUS_ALL_SENT BIT2
552 #define TXSTATUS_UNDERRUN BIT1
553 #define TXSTATUS_FIFO_EMPTY BIT0
554 #define TXSTATUS_ALL 0x00fa
555 #define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
556
557
558 #define MISCSTATUS_RXC_LATCHED BIT15
559 #define MISCSTATUS_RXC BIT14
560 #define MISCSTATUS_TXC_LATCHED BIT13
561 #define MISCSTATUS_TXC BIT12
562 #define MISCSTATUS_RI_LATCHED BIT11
563 #define MISCSTATUS_RI BIT10
564 #define MISCSTATUS_DSR_LATCHED BIT9
565 #define MISCSTATUS_DSR BIT8
566 #define MISCSTATUS_DCD_LATCHED BIT7
567 #define MISCSTATUS_DCD BIT6
568 #define MISCSTATUS_CTS_LATCHED BIT5
569 #define MISCSTATUS_CTS BIT4
570 #define MISCSTATUS_RCC_UNDERRUN BIT3
571 #define MISCSTATUS_DPLL_NO_SYNC BIT2
572 #define MISCSTATUS_BRG1_ZERO BIT1
573 #define MISCSTATUS_BRG0_ZERO BIT0
574
575 #define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
576 #define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
577
578 #define SICR_RXC_ACTIVE BIT15
579 #define SICR_RXC_INACTIVE BIT14
580 #define SICR_RXC (BIT15|BIT14)
581 #define SICR_TXC_ACTIVE BIT13
582 #define SICR_TXC_INACTIVE BIT12
583 #define SICR_TXC (BIT13|BIT12)
584 #define SICR_RI_ACTIVE BIT11
585 #define SICR_RI_INACTIVE BIT10
586 #define SICR_RI (BIT11|BIT10)
587 #define SICR_DSR_ACTIVE BIT9
588 #define SICR_DSR_INACTIVE BIT8
589 #define SICR_DSR (BIT9|BIT8)
590 #define SICR_DCD_ACTIVE BIT7
591 #define SICR_DCD_INACTIVE BIT6
592 #define SICR_DCD (BIT7|BIT6)
593 #define SICR_CTS_ACTIVE BIT5
594 #define SICR_CTS_INACTIVE BIT4
595 #define SICR_CTS (BIT5|BIT4)
596 #define SICR_RCC_UNDERFLOW BIT3
597 #define SICR_DPLL_NO_SYNC BIT2
598 #define SICR_BRG1_ZERO BIT1
599 #define SICR_BRG0_ZERO BIT0
600
601 void usc_DisableMasterIrqBit( struct mgsl_struct *info );
602 void usc_EnableMasterIrqBit( struct mgsl_struct *info );
603 void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
604 void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
605 void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
606
607 #define usc_EnableInterrupts( a, b ) \
608 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
609
610 #define usc_DisableInterrupts( a, b ) \
611 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
612
613 #define usc_EnableMasterIrqBit(a) \
614 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
615
616 #define usc_DisableMasterIrqBit(a) \
617 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
618
619 #define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
620
621 /*
622 * Transmit status Bits in Transmit Control status Register (TCSR)
623 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
624 */
625
626 #define TXSTATUS_PREAMBLE_SENT BIT7
627 #define TXSTATUS_IDLE_SENT BIT6
628 #define TXSTATUS_ABORT_SENT BIT5
629 #define TXSTATUS_EOF BIT4
630 #define TXSTATUS_CRC_SENT BIT3
631 #define TXSTATUS_ALL_SENT BIT2
632 #define TXSTATUS_UNDERRUN BIT1
633 #define TXSTATUS_FIFO_EMPTY BIT0
634
635 #define DICR_MASTER BIT15
636 #define DICR_TRANSMIT BIT0
637 #define DICR_RECEIVE BIT1
638
639 #define usc_EnableDmaInterrupts(a,b) \
640 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
641
642 #define usc_DisableDmaInterrupts(a,b) \
643 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
644
645 #define usc_EnableStatusIrqs(a,b) \
646 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
647
648 #define usc_DisablestatusIrqs(a,b) \
649 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
650
651 /* Transmit status Bits in Transmit Control status Register (TCSR) */
652 /* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
653
654
655 #define DISABLE_UNCONDITIONAL 0
656 #define DISABLE_END_OF_FRAME 1
657 #define ENABLE_UNCONDITIONAL 2
658 #define ENABLE_AUTO_CTS 3
659 #define ENABLE_AUTO_DCD 3
660 #define usc_EnableTransmitter(a,b) \
661 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
662 #define usc_EnableReceiver(a,b) \
663 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
664
665 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
666 static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
667 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
668
669 static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
670 static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
671 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
672 void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
673 void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
674
675 #define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
676 #define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
677
678 #define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
679
680 static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
681 static void usc_start_receiver( struct mgsl_struct *info );
682 static void usc_stop_receiver( struct mgsl_struct *info );
683
684 static void usc_start_transmitter( struct mgsl_struct *info );
685 static void usc_stop_transmitter( struct mgsl_struct *info );
686 static void usc_set_txidle( struct mgsl_struct *info );
687 static void usc_load_txfifo( struct mgsl_struct *info );
688
689 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
690 static void usc_enable_loopback( struct mgsl_struct *info, int enable );
691
692 static void usc_get_serial_signals( struct mgsl_struct *info );
693 static void usc_set_serial_signals( struct mgsl_struct *info );
694
695 static void usc_reset( struct mgsl_struct *info );
696
697 static void usc_set_sync_mode( struct mgsl_struct *info );
698 static void usc_set_sdlc_mode( struct mgsl_struct *info );
699 static void usc_set_async_mode( struct mgsl_struct *info );
700 static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
701
702 static void usc_loopback_frame( struct mgsl_struct *info );
703
704 static void mgsl_tx_timeout(unsigned long context);
705
706
707 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
708 static void usc_loopmode_insert_request( struct mgsl_struct * info );
709 static int usc_loopmode_active( struct mgsl_struct * info);
710 static void usc_loopmode_send_done( struct mgsl_struct * info );
711
712 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
713
714 #if SYNCLINK_GENERIC_HDLC
715 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
716 static void hdlcdev_tx_done(struct mgsl_struct *info);
717 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
718 static int hdlcdev_init(struct mgsl_struct *info);
719 static void hdlcdev_exit(struct mgsl_struct *info);
720 #endif
721
722 /*
723 * Defines a BUS descriptor value for the PCI adapter
724 * local bus address ranges.
725 */
726
727 #define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
728 (0x00400020 + \
729 ((WrHold) << 30) + \
730 ((WrDly) << 28) + \
731 ((RdDly) << 26) + \
732 ((Nwdd) << 20) + \
733 ((Nwad) << 15) + \
734 ((Nxda) << 13) + \
735 ((Nrdd) << 11) + \
736 ((Nrad) << 6) )
737
738 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
739
740 /*
741 * Adapter diagnostic routines
742 */
743 static bool mgsl_register_test( struct mgsl_struct *info );
744 static bool mgsl_irq_test( struct mgsl_struct *info );
745 static bool mgsl_dma_test( struct mgsl_struct *info );
746 static bool mgsl_memory_test( struct mgsl_struct *info );
747 static int mgsl_adapter_test( struct mgsl_struct *info );
748
749 /*
750 * device and resource management routines
751 */
752 static int mgsl_claim_resources(struct mgsl_struct *info);
753 static void mgsl_release_resources(struct mgsl_struct *info);
754 static void mgsl_add_device(struct mgsl_struct *info);
755 static struct mgsl_struct* mgsl_allocate_device(void);
756
757 /*
758 * DMA buffer manupulation functions.
759 */
760 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
761 static bool mgsl_get_rx_frame( struct mgsl_struct *info );
762 static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
763 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
764 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
765 static int num_free_tx_dma_buffers(struct mgsl_struct *info);
766 static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
767 static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
768
769 /*
770 * DMA and Shared Memory buffer allocation and formatting
771 */
772 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
773 static void mgsl_free_dma_buffers(struct mgsl_struct *info);
774 static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
775 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
776 static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
777 static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
778 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
779 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
780 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
781 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
782 static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
783 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
784
785 /*
786 * Bottom half interrupt handlers
787 */
788 static void mgsl_bh_handler(struct work_struct *work);
789 static void mgsl_bh_receive(struct mgsl_struct *info);
790 static void mgsl_bh_transmit(struct mgsl_struct *info);
791 static void mgsl_bh_status(struct mgsl_struct *info);
792
793 /*
794 * Interrupt handler routines and dispatch table.
795 */
796 static void mgsl_isr_null( struct mgsl_struct *info );
797 static void mgsl_isr_transmit_data( struct mgsl_struct *info );
798 static void mgsl_isr_receive_data( struct mgsl_struct *info );
799 static void mgsl_isr_receive_status( struct mgsl_struct *info );
800 static void mgsl_isr_transmit_status( struct mgsl_struct *info );
801 static void mgsl_isr_io_pin( struct mgsl_struct *info );
802 static void mgsl_isr_misc( struct mgsl_struct *info );
803 static void mgsl_isr_receive_dma( struct mgsl_struct *info );
804 static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
805
806 typedef void (*isr_dispatch_func)(struct mgsl_struct *);
807
808 static isr_dispatch_func UscIsrTable[7] =
809 {
810 mgsl_isr_null,
811 mgsl_isr_misc,
812 mgsl_isr_io_pin,
813 mgsl_isr_transmit_data,
814 mgsl_isr_transmit_status,
815 mgsl_isr_receive_data,
816 mgsl_isr_receive_status
817 };
818
819 /*
820 * ioctl call handlers
821 */
822 static int tiocmget(struct tty_struct *tty);
823 static int tiocmset(struct tty_struct *tty,
824 unsigned int set, unsigned int clear);
825 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
826 __user *user_icount);
827 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
828 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
829 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
830 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
831 static int mgsl_txenable(struct mgsl_struct * info, int enable);
832 static int mgsl_txabort(struct mgsl_struct * info);
833 static int mgsl_rxenable(struct mgsl_struct * info, int enable);
834 static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
835 static int mgsl_loopmode_send_done( struct mgsl_struct * info );
836
837 /* set non-zero on successful registration with PCI subsystem */
838 static bool pci_registered;
839
840 /*
841 * Global linked list of SyncLink devices
842 */
843 static struct mgsl_struct *mgsl_device_list;
844 static int mgsl_device_count;
845
846 /*
847 * Set this param to non-zero to load eax with the
848 * .text section address and breakpoint on module load.
849 * This is useful for use with gdb and add-symbol-file command.
850 */
851 static bool break_on_load;
852
853 /*
854 * Driver major number, defaults to zero to get auto
855 * assigned major number. May be forced as module parameter.
856 */
857 static int ttymajor;
858
859 /*
860 * Array of user specified options for ISA adapters.
861 */
862 static int io[MAX_ISA_DEVICES];
863 static int irq[MAX_ISA_DEVICES];
864 static int dma[MAX_ISA_DEVICES];
865 static int debug_level;
866 static int maxframe[MAX_TOTAL_DEVICES];
867 static int txdmabufs[MAX_TOTAL_DEVICES];
868 static int txholdbufs[MAX_TOTAL_DEVICES];
869
870 module_param(break_on_load, bool, 0);
871 module_param(ttymajor, int, 0);
872 module_param_array(io, int, NULL, 0);
873 module_param_array(irq, int, NULL, 0);
874 module_param_array(dma, int, NULL, 0);
875 module_param(debug_level, int, 0);
876 module_param_array(maxframe, int, NULL, 0);
877 module_param_array(txdmabufs, int, NULL, 0);
878 module_param_array(txholdbufs, int, NULL, 0);
879
880 static char *driver_name = "SyncLink serial driver";
881 static char *driver_version = "$Revision: 4.38 $";
882
883 static int synclink_init_one (struct pci_dev *dev,
884 const struct pci_device_id *ent);
885 static void synclink_remove_one (struct pci_dev *dev);
886
887 static struct pci_device_id synclink_pci_tbl[] = {
888 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
889 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
890 { 0, }, /* terminate list */
891 };
892 MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
893
894 MODULE_LICENSE("GPL");
895
896 static struct pci_driver synclink_pci_driver = {
897 .name = "synclink",
898 .id_table = synclink_pci_tbl,
899 .probe = synclink_init_one,
900 .remove = synclink_remove_one,
901 };
902
903 static struct tty_driver *serial_driver;
904
905 /* number of characters left in xmit buffer before we ask for more */
906 #define WAKEUP_CHARS 256
907
908
909 static void mgsl_change_params(struct mgsl_struct *info);
910 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
911
912 /*
913 * 1st function defined in .text section. Calling this function in
914 * init_module() followed by a breakpoint allows a remote debugger
915 * (gdb) to get the .text address for the add-symbol-file command.
916 * This allows remote debugging of dynamically loadable modules.
917 */
918 static void* mgsl_get_text_ptr(void)
919 {
920 return mgsl_get_text_ptr;
921 }
922
923 static inline int mgsl_paranoia_check(struct mgsl_struct *info,
924 char *name, const char *routine)
925 {
926 #ifdef MGSL_PARANOIA_CHECK
927 static const char *badmagic =
928 "Warning: bad magic number for mgsl struct (%s) in %s\n";
929 static const char *badinfo =
930 "Warning: null mgsl_struct for (%s) in %s\n";
931
932 if (!info) {
933 printk(badinfo, name, routine);
934 return 1;
935 }
936 if (info->magic != MGSL_MAGIC) {
937 printk(badmagic, name, routine);
938 return 1;
939 }
940 #else
941 if (!info)
942 return 1;
943 #endif
944 return 0;
945 }
946
947 /**
948 * line discipline callback wrappers
949 *
950 * The wrappers maintain line discipline references
951 * while calling into the line discipline.
952 *
953 * ldisc_receive_buf - pass receive data to line discipline
954 */
955
956 static void ldisc_receive_buf(struct tty_struct *tty,
957 const __u8 *data, char *flags, int count)
958 {
959 struct tty_ldisc *ld;
960 if (!tty)
961 return;
962 ld = tty_ldisc_ref(tty);
963 if (ld) {
964 if (ld->ops->receive_buf)
965 ld->ops->receive_buf(tty, data, flags, count);
966 tty_ldisc_deref(ld);
967 }
968 }
969
970 /* mgsl_stop() throttle (stop) transmitter
971 *
972 * Arguments: tty pointer to tty info structure
973 * Return Value: None
974 */
975 static void mgsl_stop(struct tty_struct *tty)
976 {
977 struct mgsl_struct *info = tty->driver_data;
978 unsigned long flags;
979
980 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
981 return;
982
983 if ( debug_level >= DEBUG_LEVEL_INFO )
984 printk("mgsl_stop(%s)\n",info->device_name);
985
986 spin_lock_irqsave(&info->irq_spinlock,flags);
987 if (info->tx_enabled)
988 usc_stop_transmitter(info);
989 spin_unlock_irqrestore(&info->irq_spinlock,flags);
990
991 } /* end of mgsl_stop() */
992
993 /* mgsl_start() release (start) transmitter
994 *
995 * Arguments: tty pointer to tty info structure
996 * Return Value: None
997 */
998 static void mgsl_start(struct tty_struct *tty)
999 {
1000 struct mgsl_struct *info = tty->driver_data;
1001 unsigned long flags;
1002
1003 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1004 return;
1005
1006 if ( debug_level >= DEBUG_LEVEL_INFO )
1007 printk("mgsl_start(%s)\n",info->device_name);
1008
1009 spin_lock_irqsave(&info->irq_spinlock,flags);
1010 if (!info->tx_enabled)
1011 usc_start_transmitter(info);
1012 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1013
1014 } /* end of mgsl_start() */
1015
1016 /*
1017 * Bottom half work queue access functions
1018 */
1019
1020 /* mgsl_bh_action() Return next bottom half action to perform.
1021 * Return Value: BH action code or 0 if nothing to do.
1022 */
1023 static int mgsl_bh_action(struct mgsl_struct *info)
1024 {
1025 unsigned long flags;
1026 int rc = 0;
1027
1028 spin_lock_irqsave(&info->irq_spinlock,flags);
1029
1030 if (info->pending_bh & BH_RECEIVE) {
1031 info->pending_bh &= ~BH_RECEIVE;
1032 rc = BH_RECEIVE;
1033 } else if (info->pending_bh & BH_TRANSMIT) {
1034 info->pending_bh &= ~BH_TRANSMIT;
1035 rc = BH_TRANSMIT;
1036 } else if (info->pending_bh & BH_STATUS) {
1037 info->pending_bh &= ~BH_STATUS;
1038 rc = BH_STATUS;
1039 }
1040
1041 if (!rc) {
1042 /* Mark BH routine as complete */
1043 info->bh_running = false;
1044 info->bh_requested = false;
1045 }
1046
1047 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1048
1049 return rc;
1050 }
1051
1052 /*
1053 * Perform bottom half processing of work items queued by ISR.
1054 */
1055 static void mgsl_bh_handler(struct work_struct *work)
1056 {
1057 struct mgsl_struct *info =
1058 container_of(work, struct mgsl_struct, task);
1059 int action;
1060
1061 if ( debug_level >= DEBUG_LEVEL_BH )
1062 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1063 __FILE__,__LINE__,info->device_name);
1064
1065 info->bh_running = true;
1066
1067 while((action = mgsl_bh_action(info)) != 0) {
1068
1069 /* Process work item */
1070 if ( debug_level >= DEBUG_LEVEL_BH )
1071 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1072 __FILE__,__LINE__,action);
1073
1074 switch (action) {
1075
1076 case BH_RECEIVE:
1077 mgsl_bh_receive(info);
1078 break;
1079 case BH_TRANSMIT:
1080 mgsl_bh_transmit(info);
1081 break;
1082 case BH_STATUS:
1083 mgsl_bh_status(info);
1084 break;
1085 default:
1086 /* unknown work item ID */
1087 printk("Unknown work item ID=%08X!\n", action);
1088 break;
1089 }
1090 }
1091
1092 if ( debug_level >= DEBUG_LEVEL_BH )
1093 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1094 __FILE__,__LINE__,info->device_name);
1095 }
1096
1097 static void mgsl_bh_receive(struct mgsl_struct *info)
1098 {
1099 bool (*get_rx_frame)(struct mgsl_struct *info) =
1100 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1101
1102 if ( debug_level >= DEBUG_LEVEL_BH )
1103 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1104 __FILE__,__LINE__,info->device_name);
1105
1106 do
1107 {
1108 if (info->rx_rcc_underrun) {
1109 unsigned long flags;
1110 spin_lock_irqsave(&info->irq_spinlock,flags);
1111 usc_start_receiver(info);
1112 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1113 return;
1114 }
1115 } while(get_rx_frame(info));
1116 }
1117
1118 static void mgsl_bh_transmit(struct mgsl_struct *info)
1119 {
1120 struct tty_struct *tty = info->port.tty;
1121 unsigned long flags;
1122
1123 if ( debug_level >= DEBUG_LEVEL_BH )
1124 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1125 __FILE__,__LINE__,info->device_name);
1126
1127 if (tty)
1128 tty_wakeup(tty);
1129
1130 /* if transmitter idle and loopmode_send_done_requested
1131 * then start echoing RxD to TxD
1132 */
1133 spin_lock_irqsave(&info->irq_spinlock,flags);
1134 if ( !info->tx_active && info->loopmode_send_done_requested )
1135 usc_loopmode_send_done( info );
1136 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1137 }
1138
1139 static void mgsl_bh_status(struct mgsl_struct *info)
1140 {
1141 if ( debug_level >= DEBUG_LEVEL_BH )
1142 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1143 __FILE__,__LINE__,info->device_name);
1144
1145 info->ri_chkcount = 0;
1146 info->dsr_chkcount = 0;
1147 info->dcd_chkcount = 0;
1148 info->cts_chkcount = 0;
1149 }
1150
1151 /* mgsl_isr_receive_status()
1152 *
1153 * Service a receive status interrupt. The type of status
1154 * interrupt is indicated by the state of the RCSR.
1155 * This is only used for HDLC mode.
1156 *
1157 * Arguments: info pointer to device instance data
1158 * Return Value: None
1159 */
1160 static void mgsl_isr_receive_status( struct mgsl_struct *info )
1161 {
1162 u16 status = usc_InReg( info, RCSR );
1163
1164 if ( debug_level >= DEBUG_LEVEL_ISR )
1165 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1166 __FILE__,__LINE__,status);
1167
1168 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1169 info->loopmode_insert_requested &&
1170 usc_loopmode_active(info) )
1171 {
1172 ++info->icount.rxabort;
1173 info->loopmode_insert_requested = false;
1174
1175 /* clear CMR:13 to start echoing RxD to TxD */
1176 info->cmr_value &= ~BIT13;
1177 usc_OutReg(info, CMR, info->cmr_value);
1178
1179 /* disable received abort irq (no longer required) */
1180 usc_OutReg(info, RICR,
1181 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1182 }
1183
1184 if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) {
1185 if (status & RXSTATUS_EXITED_HUNT)
1186 info->icount.exithunt++;
1187 if (status & RXSTATUS_IDLE_RECEIVED)
1188 info->icount.rxidle++;
1189 wake_up_interruptible(&info->event_wait_q);
1190 }
1191
1192 if (status & RXSTATUS_OVERRUN){
1193 info->icount.rxover++;
1194 usc_process_rxoverrun_sync( info );
1195 }
1196
1197 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1198 usc_UnlatchRxstatusBits( info, status );
1199
1200 } /* end of mgsl_isr_receive_status() */
1201
1202 /* mgsl_isr_transmit_status()
1203 *
1204 * Service a transmit status interrupt
1205 * HDLC mode :end of transmit frame
1206 * Async mode:all data is sent
1207 * transmit status is indicated by bits in the TCSR.
1208 *
1209 * Arguments: info pointer to device instance data
1210 * Return Value: None
1211 */
1212 static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1213 {
1214 u16 status = usc_InReg( info, TCSR );
1215
1216 if ( debug_level >= DEBUG_LEVEL_ISR )
1217 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1218 __FILE__,__LINE__,status);
1219
1220 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1221 usc_UnlatchTxstatusBits( info, status );
1222
1223 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1224 {
1225 /* finished sending HDLC abort. This may leave */
1226 /* the TxFifo with data from the aborted frame */
1227 /* so purge the TxFifo. Also shutdown the DMA */
1228 /* channel in case there is data remaining in */
1229 /* the DMA buffer */
1230 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1231 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1232 }
1233
1234 if ( status & TXSTATUS_EOF_SENT )
1235 info->icount.txok++;
1236 else if ( status & TXSTATUS_UNDERRUN )
1237 info->icount.txunder++;
1238 else if ( status & TXSTATUS_ABORT_SENT )
1239 info->icount.txabort++;
1240 else
1241 info->icount.txunder++;
1242
1243 info->tx_active = false;
1244 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1245 del_timer(&info->tx_timer);
1246
1247 if ( info->drop_rts_on_tx_done ) {
1248 usc_get_serial_signals( info );
1249 if ( info->serial_signals & SerialSignal_RTS ) {
1250 info->serial_signals &= ~SerialSignal_RTS;
1251 usc_set_serial_signals( info );
1252 }
1253 info->drop_rts_on_tx_done = false;
1254 }
1255
1256 #if SYNCLINK_GENERIC_HDLC
1257 if (info->netcount)
1258 hdlcdev_tx_done(info);
1259 else
1260 #endif
1261 {
1262 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1263 usc_stop_transmitter(info);
1264 return;
1265 }
1266 info->pending_bh |= BH_TRANSMIT;
1267 }
1268
1269 } /* end of mgsl_isr_transmit_status() */
1270
1271 /* mgsl_isr_io_pin()
1272 *
1273 * Service an Input/Output pin interrupt. The type of
1274 * interrupt is indicated by bits in the MISR
1275 *
1276 * Arguments: info pointer to device instance data
1277 * Return Value: None
1278 */
1279 static void mgsl_isr_io_pin( struct mgsl_struct *info )
1280 {
1281 struct mgsl_icount *icount;
1282 u16 status = usc_InReg( info, MISR );
1283
1284 if ( debug_level >= DEBUG_LEVEL_ISR )
1285 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1286 __FILE__,__LINE__,status);
1287
1288 usc_ClearIrqPendingBits( info, IO_PIN );
1289 usc_UnlatchIostatusBits( info, status );
1290
1291 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1292 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1293 icount = &info->icount;
1294 /* update input line counters */
1295 if (status & MISCSTATUS_RI_LATCHED) {
1296 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1297 usc_DisablestatusIrqs(info,SICR_RI);
1298 icount->rng++;
1299 if ( status & MISCSTATUS_RI )
1300 info->input_signal_events.ri_up++;
1301 else
1302 info->input_signal_events.ri_down++;
1303 }
1304 if (status & MISCSTATUS_DSR_LATCHED) {
1305 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1306 usc_DisablestatusIrqs(info,SICR_DSR);
1307 icount->dsr++;
1308 if ( status & MISCSTATUS_DSR )
1309 info->input_signal_events.dsr_up++;
1310 else
1311 info->input_signal_events.dsr_down++;
1312 }
1313 if (status & MISCSTATUS_DCD_LATCHED) {
1314 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1315 usc_DisablestatusIrqs(info,SICR_DCD);
1316 icount->dcd++;
1317 if (status & MISCSTATUS_DCD) {
1318 info->input_signal_events.dcd_up++;
1319 } else
1320 info->input_signal_events.dcd_down++;
1321 #if SYNCLINK_GENERIC_HDLC
1322 if (info->netcount) {
1323 if (status & MISCSTATUS_DCD)
1324 netif_carrier_on(info->netdev);
1325 else
1326 netif_carrier_off(info->netdev);
1327 }
1328 #endif
1329 }
1330 if (status & MISCSTATUS_CTS_LATCHED)
1331 {
1332 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1333 usc_DisablestatusIrqs(info,SICR_CTS);
1334 icount->cts++;
1335 if ( status & MISCSTATUS_CTS )
1336 info->input_signal_events.cts_up++;
1337 else
1338 info->input_signal_events.cts_down++;
1339 }
1340 wake_up_interruptible(&info->status_event_wait_q);
1341 wake_up_interruptible(&info->event_wait_q);
1342
1343 if ( (info->port.flags & ASYNC_CHECK_CD) &&
1344 (status & MISCSTATUS_DCD_LATCHED) ) {
1345 if ( debug_level >= DEBUG_LEVEL_ISR )
1346 printk("%s CD now %s...", info->device_name,
1347 (status & MISCSTATUS_DCD) ? "on" : "off");
1348 if (status & MISCSTATUS_DCD)
1349 wake_up_interruptible(&info->port.open_wait);
1350 else {
1351 if ( debug_level >= DEBUG_LEVEL_ISR )
1352 printk("doing serial hangup...");
1353 if (info->port.tty)
1354 tty_hangup(info->port.tty);
1355 }
1356 }
1357
1358 if (tty_port_cts_enabled(&info->port) &&
1359 (status & MISCSTATUS_CTS_LATCHED) ) {
1360 if (info->port.tty->hw_stopped) {
1361 if (status & MISCSTATUS_CTS) {
1362 if ( debug_level >= DEBUG_LEVEL_ISR )
1363 printk("CTS tx start...");
1364 if (info->port.tty)
1365 info->port.tty->hw_stopped = 0;
1366 usc_start_transmitter(info);
1367 info->pending_bh |= BH_TRANSMIT;
1368 return;
1369 }
1370 } else {
1371 if (!(status & MISCSTATUS_CTS)) {
1372 if ( debug_level >= DEBUG_LEVEL_ISR )
1373 printk("CTS tx stop...");
1374 if (info->port.tty)
1375 info->port.tty->hw_stopped = 1;
1376 usc_stop_transmitter(info);
1377 }
1378 }
1379 }
1380 }
1381
1382 info->pending_bh |= BH_STATUS;
1383
1384 /* for diagnostics set IRQ flag */
1385 if ( status & MISCSTATUS_TXC_LATCHED ){
1386 usc_OutReg( info, SICR,
1387 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1388 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
1389 info->irq_occurred = true;
1390 }
1391
1392 } /* end of mgsl_isr_io_pin() */
1393
1394 /* mgsl_isr_transmit_data()
1395 *
1396 * Service a transmit data interrupt (async mode only).
1397 *
1398 * Arguments: info pointer to device instance data
1399 * Return Value: None
1400 */
1401 static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1402 {
1403 if ( debug_level >= DEBUG_LEVEL_ISR )
1404 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1405 __FILE__,__LINE__,info->xmit_cnt);
1406
1407 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1408
1409 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
1410 usc_stop_transmitter(info);
1411 return;
1412 }
1413
1414 if ( info->xmit_cnt )
1415 usc_load_txfifo( info );
1416 else
1417 info->tx_active = false;
1418
1419 if (info->xmit_cnt < WAKEUP_CHARS)
1420 info->pending_bh |= BH_TRANSMIT;
1421
1422 } /* end of mgsl_isr_transmit_data() */
1423
1424 /* mgsl_isr_receive_data()
1425 *
1426 * Service a receive data interrupt. This occurs
1427 * when operating in asynchronous interrupt transfer mode.
1428 * The receive data FIFO is flushed to the receive data buffers.
1429 *
1430 * Arguments: info pointer to device instance data
1431 * Return Value: None
1432 */
1433 static void mgsl_isr_receive_data( struct mgsl_struct *info )
1434 {
1435 int Fifocount;
1436 u16 status;
1437 int work = 0;
1438 unsigned char DataByte;
1439 struct mgsl_icount *icount = &info->icount;
1440
1441 if ( debug_level >= DEBUG_LEVEL_ISR )
1442 printk("%s(%d):mgsl_isr_receive_data\n",
1443 __FILE__,__LINE__);
1444
1445 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1446
1447 /* select FIFO status for RICR readback */
1448 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1449
1450 /* clear the Wordstatus bit so that status readback */
1451 /* only reflects the status of this byte */
1452 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1453
1454 /* flush the receive FIFO */
1455
1456 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
1457 int flag;
1458
1459 /* read one byte from RxFIFO */
1460 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1461 info->io_base + CCAR );
1462 DataByte = inb( info->io_base + CCAR );
1463
1464 /* get the status of the received byte */
1465 status = usc_InReg(info, RCSR);
1466 if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
1467 RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) )
1468 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1469
1470 icount->rx++;
1471
1472 flag = 0;
1473 if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
1474 RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) {
1475 printk("rxerr=%04X\n",status);
1476 /* update error statistics */
1477 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1478 status &= ~(RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR);
1479 icount->brk++;
1480 } else if (status & RXSTATUS_PARITY_ERROR)
1481 icount->parity++;
1482 else if (status & RXSTATUS_FRAMING_ERROR)
1483 icount->frame++;
1484 else if (status & RXSTATUS_OVERRUN) {
1485 /* must issue purge fifo cmd before */
1486 /* 16C32 accepts more receive chars */
1487 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1488 icount->overrun++;
1489 }
1490
1491 /* discard char if tty control flags say so */
1492 if (status & info->ignore_status_mask)
1493 continue;
1494
1495 status &= info->read_status_mask;
1496
1497 if (status & RXSTATUS_BREAK_RECEIVED) {
1498 flag = TTY_BREAK;
1499 if (info->port.flags & ASYNC_SAK)
1500 do_SAK(info->port.tty);
1501 } else if (status & RXSTATUS_PARITY_ERROR)
1502 flag = TTY_PARITY;
1503 else if (status & RXSTATUS_FRAMING_ERROR)
1504 flag = TTY_FRAME;
1505 } /* end of if (error) */
1506 tty_insert_flip_char(&info->port, DataByte, flag);
1507 if (status & RXSTATUS_OVERRUN) {
1508 /* Overrun is special, since it's
1509 * reported immediately, and doesn't
1510 * affect the current character
1511 */
1512 work += tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
1513 }
1514 }
1515
1516 if ( debug_level >= DEBUG_LEVEL_ISR ) {
1517 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1518 __FILE__,__LINE__,icount->rx,icount->brk,
1519 icount->parity,icount->frame,icount->overrun);
1520 }
1521
1522 if(work)
1523 tty_flip_buffer_push(&info->port);
1524 }
1525
1526 /* mgsl_isr_misc()
1527 *
1528 * Service a miscellaneous interrupt source.
1529 *
1530 * Arguments: info pointer to device extension (instance data)
1531 * Return Value: None
1532 */
1533 static void mgsl_isr_misc( struct mgsl_struct *info )
1534 {
1535 u16 status = usc_InReg( info, MISR );
1536
1537 if ( debug_level >= DEBUG_LEVEL_ISR )
1538 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1539 __FILE__,__LINE__,status);
1540
1541 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1542 (info->params.mode == MGSL_MODE_HDLC)) {
1543
1544 /* turn off receiver and rx DMA */
1545 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1546 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1547 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1548 usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
1549 usc_DisableInterrupts(info, RECEIVE_DATA | RECEIVE_STATUS);
1550
1551 /* schedule BH handler to restart receiver */
1552 info->pending_bh |= BH_RECEIVE;
1553 info->rx_rcc_underrun = true;
1554 }
1555
1556 usc_ClearIrqPendingBits( info, MISC );
1557 usc_UnlatchMiscstatusBits( info, status );
1558
1559 } /* end of mgsl_isr_misc() */
1560
1561 /* mgsl_isr_null()
1562 *
1563 * Services undefined interrupt vectors from the
1564 * USC. (hence this function SHOULD never be called)
1565 *
1566 * Arguments: info pointer to device extension (instance data)
1567 * Return Value: None
1568 */
1569 static void mgsl_isr_null( struct mgsl_struct *info )
1570 {
1571
1572 } /* end of mgsl_isr_null() */
1573
1574 /* mgsl_isr_receive_dma()
1575 *
1576 * Service a receive DMA channel interrupt.
1577 * For this driver there are two sources of receive DMA interrupts
1578 * as identified in the Receive DMA mode Register (RDMR):
1579 *
1580 * BIT3 EOA/EOL End of List, all receive buffers in receive
1581 * buffer list have been filled (no more free buffers
1582 * available). The DMA controller has shut down.
1583 *
1584 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1585 * DMA buffer is terminated in response to completion
1586 * of a good frame or a frame with errors. The status
1587 * of the frame is stored in the buffer entry in the
1588 * list of receive buffer entries.
1589 *
1590 * Arguments: info pointer to device instance data
1591 * Return Value: None
1592 */
1593 static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1594 {
1595 u16 status;
1596
1597 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1598 usc_OutDmaReg( info, CDIR, BIT9 | BIT1 );
1599
1600 /* Read the receive DMA status to identify interrupt type. */
1601 /* This also clears the status bits. */
1602 status = usc_InDmaReg( info, RDMR );
1603
1604 if ( debug_level >= DEBUG_LEVEL_ISR )
1605 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1606 __FILE__,__LINE__,info->device_name,status);
1607
1608 info->pending_bh |= BH_RECEIVE;
1609
1610 if ( status & BIT3 ) {
1611 info->rx_overflow = true;
1612 info->icount.buf_overrun++;
1613 }
1614
1615 } /* end of mgsl_isr_receive_dma() */
1616
1617 /* mgsl_isr_transmit_dma()
1618 *
1619 * This function services a transmit DMA channel interrupt.
1620 *
1621 * For this driver there is one source of transmit DMA interrupts
1622 * as identified in the Transmit DMA Mode Register (TDMR):
1623 *
1624 * BIT2 EOB End of Buffer. This interrupt occurs when a
1625 * transmit DMA buffer has been emptied.
1626 *
1627 * The driver maintains enough transmit DMA buffers to hold at least
1628 * one max frame size transmit frame. When operating in a buffered
1629 * transmit mode, there may be enough transmit DMA buffers to hold at
1630 * least two or more max frame size frames. On an EOB condition,
1631 * determine if there are any queued transmit buffers and copy into
1632 * transmit DMA buffers if we have room.
1633 *
1634 * Arguments: info pointer to device instance data
1635 * Return Value: None
1636 */
1637 static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1638 {
1639 u16 status;
1640
1641 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1642 usc_OutDmaReg(info, CDIR, BIT8 | BIT0 );
1643
1644 /* Read the transmit DMA status to identify interrupt type. */
1645 /* This also clears the status bits. */
1646
1647 status = usc_InDmaReg( info, TDMR );
1648
1649 if ( debug_level >= DEBUG_LEVEL_ISR )
1650 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1651 __FILE__,__LINE__,info->device_name,status);
1652
1653 if ( status & BIT2 ) {
1654 --info->tx_dma_buffers_used;
1655
1656 /* if there are transmit frames queued,
1657 * try to load the next one
1658 */
1659 if ( load_next_tx_holding_buffer(info) ) {
1660 /* if call returns non-zero value, we have
1661 * at least one free tx holding buffer
1662 */
1663 info->pending_bh |= BH_TRANSMIT;
1664 }
1665 }
1666
1667 } /* end of mgsl_isr_transmit_dma() */
1668
1669 /* mgsl_interrupt()
1670 *
1671 * Interrupt service routine entry point.
1672 *
1673 * Arguments:
1674 *
1675 * irq interrupt number that caused interrupt
1676 * dev_id device ID supplied during interrupt registration
1677 *
1678 * Return Value: None
1679 */
1680 static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
1681 {
1682 struct mgsl_struct *info = dev_id;
1683 u16 UscVector;
1684 u16 DmaVector;
1685
1686 if ( debug_level >= DEBUG_LEVEL_ISR )
1687 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
1688 __FILE__, __LINE__, info->irq_level);
1689
1690 spin_lock(&info->irq_spinlock);
1691
1692 for(;;) {
1693 /* Read the interrupt vectors from hardware. */
1694 UscVector = usc_InReg(info, IVR) >> 9;
1695 DmaVector = usc_InDmaReg(info, DIVR);
1696
1697 if ( debug_level >= DEBUG_LEVEL_ISR )
1698 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1699 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1700
1701 if ( !UscVector && !DmaVector )
1702 break;
1703
1704 /* Dispatch interrupt vector */
1705 if ( UscVector )
1706 (*UscIsrTable[UscVector])(info);
1707 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1708 mgsl_isr_transmit_dma(info);
1709 else
1710 mgsl_isr_receive_dma(info);
1711
1712 if ( info->isr_overflow ) {
1713 printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
1714 __FILE__, __LINE__, info->device_name, info->irq_level);
1715 usc_DisableMasterIrqBit(info);
1716 usc_DisableDmaInterrupts(info,DICR_MASTER);
1717 break;
1718 }
1719 }
1720
1721 /* Request bottom half processing if there's something
1722 * for it to do and the bh is not already running
1723 */
1724
1725 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1726 if ( debug_level >= DEBUG_LEVEL_ISR )
1727 printk("%s(%d):%s queueing bh task.\n",
1728 __FILE__,__LINE__,info->device_name);
1729 schedule_work(&info->task);
1730 info->bh_requested = true;
1731 }
1732
1733 spin_unlock(&info->irq_spinlock);
1734
1735 if ( debug_level >= DEBUG_LEVEL_ISR )
1736 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
1737 __FILE__, __LINE__, info->irq_level);
1738
1739 return IRQ_HANDLED;
1740 } /* end of mgsl_interrupt() */
1741
1742 /* startup()
1743 *
1744 * Initialize and start device.
1745 *
1746 * Arguments: info pointer to device instance data
1747 * Return Value: 0 if success, otherwise error code
1748 */
1749 static int startup(struct mgsl_struct * info)
1750 {
1751 int retval = 0;
1752
1753 if ( debug_level >= DEBUG_LEVEL_INFO )
1754 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1755
1756 if (info->port.flags & ASYNC_INITIALIZED)
1757 return 0;
1758
1759 if (!info->xmit_buf) {
1760 /* allocate a page of memory for a transmit buffer */
1761 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1762 if (!info->xmit_buf) {
1763 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1764 __FILE__,__LINE__,info->device_name);
1765 return -ENOMEM;
1766 }
1767 }
1768
1769 info->pending_bh = 0;
1770
1771 memset(&info->icount, 0, sizeof(info->icount));
1772
1773 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
1774
1775 /* Allocate and claim adapter resources */
1776 retval = mgsl_claim_resources(info);
1777
1778 /* perform existence check and diagnostics */
1779 if ( !retval )
1780 retval = mgsl_adapter_test(info);
1781
1782 if ( retval ) {
1783 if (capable(CAP_SYS_ADMIN) && info->port.tty)
1784 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1785 mgsl_release_resources(info);
1786 return retval;
1787 }
1788
1789 /* program hardware for current parameters */
1790 mgsl_change_params(info);
1791
1792 if (info->port.tty)
1793 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
1794
1795 info->port.flags |= ASYNC_INITIALIZED;
1796
1797 return 0;
1798
1799 } /* end of startup() */
1800
1801 /* shutdown()
1802 *
1803 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1804 *
1805 * Arguments: info pointer to device instance data
1806 * Return Value: None
1807 */
1808 static void shutdown(struct mgsl_struct * info)
1809 {
1810 unsigned long flags;
1811
1812 if (!(info->port.flags & ASYNC_INITIALIZED))
1813 return;
1814
1815 if (debug_level >= DEBUG_LEVEL_INFO)
1816 printk("%s(%d):mgsl_shutdown(%s)\n",
1817 __FILE__,__LINE__, info->device_name );
1818
1819 /* clear status wait queue because status changes */
1820 /* can't happen after shutting down the hardware */
1821 wake_up_interruptible(&info->status_event_wait_q);
1822 wake_up_interruptible(&info->event_wait_q);
1823
1824 del_timer_sync(&info->tx_timer);
1825
1826 if (info->xmit_buf) {
1827 free_page((unsigned long) info->xmit_buf);
1828 info->xmit_buf = NULL;
1829 }
1830
1831 spin_lock_irqsave(&info->irq_spinlock,flags);
1832 usc_DisableMasterIrqBit(info);
1833 usc_stop_receiver(info);
1834 usc_stop_transmitter(info);
1835 usc_DisableInterrupts(info,RECEIVE_DATA | RECEIVE_STATUS |
1836 TRANSMIT_DATA | TRANSMIT_STATUS | IO_PIN | MISC );
1837 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1838
1839 /* Disable DMAEN (Port 7, Bit 14) */
1840 /* This disconnects the DMA request signal from the ISA bus */
1841 /* on the ISA adapter. This has no effect for the PCI adapter */
1842 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1843
1844 /* Disable INTEN (Port 6, Bit12) */
1845 /* This disconnects the IRQ request signal to the ISA bus */
1846 /* on the ISA adapter. This has no effect for the PCI adapter */
1847 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1848
1849 if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
1850 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1851 usc_set_serial_signals(info);
1852 }
1853
1854 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1855
1856 mgsl_release_resources(info);
1857
1858 if (info->port.tty)
1859 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
1860
1861 info->port.flags &= ~ASYNC_INITIALIZED;
1862
1863 } /* end of shutdown() */
1864
1865 static void mgsl_program_hw(struct mgsl_struct *info)
1866 {
1867 unsigned long flags;
1868
1869 spin_lock_irqsave(&info->irq_spinlock,flags);
1870
1871 usc_stop_receiver(info);
1872 usc_stop_transmitter(info);
1873 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1874
1875 if (info->params.mode == MGSL_MODE_HDLC ||
1876 info->params.mode == MGSL_MODE_RAW ||
1877 info->netcount)
1878 usc_set_sync_mode(info);
1879 else
1880 usc_set_async_mode(info);
1881
1882 usc_set_serial_signals(info);
1883
1884 info->dcd_chkcount = 0;
1885 info->cts_chkcount = 0;
1886 info->ri_chkcount = 0;
1887 info->dsr_chkcount = 0;
1888
1889 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1890 usc_EnableInterrupts(info, IO_PIN);
1891 usc_get_serial_signals(info);
1892
1893 if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
1894 usc_start_receiver(info);
1895
1896 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1897 }
1898
1899 /* Reconfigure adapter based on new parameters
1900 */
1901 static void mgsl_change_params(struct mgsl_struct *info)
1902 {
1903 unsigned cflag;
1904 int bits_per_char;
1905
1906 if (!info->port.tty)
1907 return;
1908
1909 if (debug_level >= DEBUG_LEVEL_INFO)
1910 printk("%s(%d):mgsl_change_params(%s)\n",
1911 __FILE__,__LINE__, info->device_name );
1912
1913 cflag = info->port.tty->termios.c_cflag;
1914
1915 /* if B0 rate (hangup) specified then negate RTS and DTR */
1916 /* otherwise assert RTS and DTR */
1917 if (cflag & CBAUD)
1918 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1919 else
1920 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
1921
1922 /* byte size and parity */
1923
1924 switch (cflag & CSIZE) {
1925 case CS5: info->params.data_bits = 5; break;
1926 case CS6: info->params.data_bits = 6; break;
1927 case CS7: info->params.data_bits = 7; break;
1928 case CS8: info->params.data_bits = 8; break;
1929 /* Never happens, but GCC is too dumb to figure it out */
1930 default: info->params.data_bits = 7; break;
1931 }
1932
1933 if (cflag & CSTOPB)
1934 info->params.stop_bits = 2;
1935 else
1936 info->params.stop_bits = 1;
1937
1938 info->params.parity = ASYNC_PARITY_NONE;
1939 if (cflag & PARENB) {
1940 if (cflag & PARODD)
1941 info->params.parity = ASYNC_PARITY_ODD;
1942 else
1943 info->params.parity = ASYNC_PARITY_EVEN;
1944 #ifdef CMSPAR
1945 if (cflag & CMSPAR)
1946 info->params.parity = ASYNC_PARITY_SPACE;
1947 #endif
1948 }
1949
1950 /* calculate number of jiffies to transmit a full
1951 * FIFO (32 bytes) at specified data rate
1952 */
1953 bits_per_char = info->params.data_bits +
1954 info->params.stop_bits + 1;
1955
1956 /* if port data rate is set to 460800 or less then
1957 * allow tty settings to override, otherwise keep the
1958 * current data rate.
1959 */
1960 if (info->params.data_rate <= 460800)
1961 info->params.data_rate = tty_get_baud_rate(info->port.tty);
1962
1963 if ( info->params.data_rate ) {
1964 info->timeout = (32*HZ*bits_per_char) /
1965 info->params.data_rate;
1966 }
1967 info->timeout += HZ/50; /* Add .02 seconds of slop */
1968
1969 if (cflag & CRTSCTS)
1970 info->port.flags |= ASYNC_CTS_FLOW;
1971 else
1972 info->port.flags &= ~ASYNC_CTS_FLOW;
1973
1974 if (cflag & CLOCAL)
1975 info->port.flags &= ~ASYNC_CHECK_CD;
1976 else
1977 info->port.flags |= ASYNC_CHECK_CD;
1978
1979 /* process tty input control flags */
1980
1981 info->read_status_mask = RXSTATUS_OVERRUN;
1982 if (I_INPCK(info->port.tty))
1983 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1984 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
1985 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
1986
1987 if (I_IGNPAR(info->port.tty))
1988 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
1989 if (I_IGNBRK(info->port.tty)) {
1990 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
1991 /* If ignoring parity and break indicators, ignore
1992 * overruns too. (For real raw support).
1993 */
1994 if (I_IGNPAR(info->port.tty))
1995 info->ignore_status_mask |= RXSTATUS_OVERRUN;
1996 }
1997
1998 mgsl_program_hw(info);
1999
2000 } /* end of mgsl_change_params() */
2001
2002 /* mgsl_put_char()
2003 *
2004 * Add a character to the transmit buffer.
2005 *
2006 * Arguments: tty pointer to tty information structure
2007 * ch character to add to transmit buffer
2008 *
2009 * Return Value: None
2010 */
2011 static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
2012 {
2013 struct mgsl_struct *info = tty->driver_data;
2014 unsigned long flags;
2015 int ret = 0;
2016
2017 if (debug_level >= DEBUG_LEVEL_INFO) {
2018 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
2019 __FILE__, __LINE__, ch, info->device_name);
2020 }
2021
2022 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
2023 return 0;
2024
2025 if (!info->xmit_buf)
2026 return 0;
2027
2028 spin_lock_irqsave(&info->irq_spinlock, flags);
2029
2030 if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
2031 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2032 info->xmit_buf[info->xmit_head++] = ch;
2033 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2034 info->xmit_cnt++;
2035 ret = 1;
2036 }
2037 }
2038 spin_unlock_irqrestore(&info->irq_spinlock, flags);
2039 return ret;
2040
2041 } /* end of mgsl_put_char() */
2042
2043 /* mgsl_flush_chars()
2044 *
2045 * Enable transmitter so remaining characters in the
2046 * transmit buffer are sent.
2047 *
2048 * Arguments: tty pointer to tty information structure
2049 * Return Value: None
2050 */
2051 static void mgsl_flush_chars(struct tty_struct *tty)
2052 {
2053 struct mgsl_struct *info = tty->driver_data;
2054 unsigned long flags;
2055
2056 if ( debug_level >= DEBUG_LEVEL_INFO )
2057 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2058 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2059
2060 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2061 return;
2062
2063 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2064 !info->xmit_buf)
2065 return;
2066
2067 if ( debug_level >= DEBUG_LEVEL_INFO )
2068 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2069 __FILE__,__LINE__,info->device_name );
2070
2071 spin_lock_irqsave(&info->irq_spinlock,flags);
2072
2073 if (!info->tx_active) {
2074 if ( (info->params.mode == MGSL_MODE_HDLC ||
2075 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2076 /* operating in synchronous (frame oriented) mode */
2077 /* copy data from circular xmit_buf to */
2078 /* transmit DMA buffer. */
2079 mgsl_load_tx_dma_buffer(info,
2080 info->xmit_buf,info->xmit_cnt);
2081 }
2082 usc_start_transmitter(info);
2083 }
2084
2085 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2086
2087 } /* end of mgsl_flush_chars() */
2088
2089 /* mgsl_write()
2090 *
2091 * Send a block of data
2092 *
2093 * Arguments:
2094 *
2095 * tty pointer to tty information structure
2096 * buf pointer to buffer containing send data
2097 * count size of send data in bytes
2098 *
2099 * Return Value: number of characters written
2100 */
2101 static int mgsl_write(struct tty_struct * tty,
2102 const unsigned char *buf, int count)
2103 {
2104 int c, ret = 0;
2105 struct mgsl_struct *info = tty->driver_data;
2106 unsigned long flags;
2107
2108 if ( debug_level >= DEBUG_LEVEL_INFO )
2109 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2110 __FILE__,__LINE__,info->device_name,count);
2111
2112 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2113 goto cleanup;
2114
2115 if (!info->xmit_buf)
2116 goto cleanup;
2117
2118 if ( info->params.mode == MGSL_MODE_HDLC ||
2119 info->params.mode == MGSL_MODE_RAW ) {
2120 /* operating in synchronous (frame oriented) mode */
2121 if (info->tx_active) {
2122
2123 if ( info->params.mode == MGSL_MODE_HDLC ) {
2124 ret = 0;
2125 goto cleanup;
2126 }
2127 /* transmitter is actively sending data -
2128 * if we have multiple transmit dma and
2129 * holding buffers, attempt to queue this
2130 * frame for transmission at a later time.
2131 */
2132 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2133 /* no tx holding buffers available */
2134 ret = 0;
2135 goto cleanup;
2136 }
2137
2138 /* queue transmit frame request */
2139 ret = count;
2140 save_tx_buffer_request(info,buf,count);
2141
2142 /* if we have sufficient tx dma buffers,
2143 * load the next buffered tx request
2144 */
2145 spin_lock_irqsave(&info->irq_spinlock,flags);
2146 load_next_tx_holding_buffer(info);
2147 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2148 goto cleanup;
2149 }
2150
2151 /* if operating in HDLC LoopMode and the adapter */
2152 /* has yet to be inserted into the loop, we can't */
2153 /* transmit */
2154
2155 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2156 !usc_loopmode_active(info) )
2157 {
2158 ret = 0;
2159 goto cleanup;
2160 }
2161
2162 if ( info->xmit_cnt ) {
2163 /* Send accumulated from send_char() calls */
2164 /* as frame and wait before accepting more data. */
2165 ret = 0;
2166
2167 /* copy data from circular xmit_buf to */
2168 /* transmit DMA buffer. */
2169 mgsl_load_tx_dma_buffer(info,
2170 info->xmit_buf,info->xmit_cnt);
2171 if ( debug_level >= DEBUG_LEVEL_INFO )
2172 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2173 __FILE__,__LINE__,info->device_name);
2174 } else {
2175 if ( debug_level >= DEBUG_LEVEL_INFO )
2176 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2177 __FILE__,__LINE__,info->device_name);
2178 ret = count;
2179 info->xmit_cnt = count;
2180 mgsl_load_tx_dma_buffer(info,buf,count);
2181 }
2182 } else {
2183 while (1) {
2184 spin_lock_irqsave(&info->irq_spinlock,flags);
2185 c = min_t(int, count,
2186 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2187 SERIAL_XMIT_SIZE - info->xmit_head));
2188 if (c <= 0) {
2189 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2190 break;
2191 }
2192 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2193 info->xmit_head = ((info->xmit_head + c) &
2194 (SERIAL_XMIT_SIZE-1));
2195 info->xmit_cnt += c;
2196 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2197 buf += c;
2198 count -= c;
2199 ret += c;
2200 }
2201 }
2202
2203 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2204 spin_lock_irqsave(&info->irq_spinlock,flags);
2205 if (!info->tx_active)
2206 usc_start_transmitter(info);
2207 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2208 }
2209 cleanup:
2210 if ( debug_level >= DEBUG_LEVEL_INFO )
2211 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2212 __FILE__,__LINE__,info->device_name,ret);
2213
2214 return ret;
2215
2216 } /* end of mgsl_write() */
2217
2218 /* mgsl_write_room()
2219 *
2220 * Return the count of free bytes in transmit buffer
2221 *
2222 * Arguments: tty pointer to tty info structure
2223 * Return Value: None
2224 */
2225 static int mgsl_write_room(struct tty_struct *tty)
2226 {
2227 struct mgsl_struct *info = tty->driver_data;
2228 int ret;
2229
2230 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2231 return 0;
2232 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2233 if (ret < 0)
2234 ret = 0;
2235
2236 if (debug_level >= DEBUG_LEVEL_INFO)
2237 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2238 __FILE__,__LINE__, info->device_name,ret );
2239
2240 if ( info->params.mode == MGSL_MODE_HDLC ||
2241 info->params.mode == MGSL_MODE_RAW ) {
2242 /* operating in synchronous (frame oriented) mode */
2243 if ( info->tx_active )
2244 return 0;
2245 else
2246 return HDLC_MAX_FRAME_SIZE;
2247 }
2248
2249 return ret;
2250
2251 } /* end of mgsl_write_room() */
2252
2253 /* mgsl_chars_in_buffer()
2254 *
2255 * Return the count of bytes in transmit buffer
2256 *
2257 * Arguments: tty pointer to tty info structure
2258 * Return Value: None
2259 */
2260 static int mgsl_chars_in_buffer(struct tty_struct *tty)
2261 {
2262 struct mgsl_struct *info = tty->driver_data;
2263
2264 if (debug_level >= DEBUG_LEVEL_INFO)
2265 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2266 __FILE__,__LINE__, info->device_name );
2267
2268 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2269 return 0;
2270
2271 if (debug_level >= DEBUG_LEVEL_INFO)
2272 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2273 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2274
2275 if ( info->params.mode == MGSL_MODE_HDLC ||
2276 info->params.mode == MGSL_MODE_RAW ) {
2277 /* operating in synchronous (frame oriented) mode */
2278 if ( info->tx_active )
2279 return info->max_frame_size;
2280 else
2281 return 0;
2282 }
2283
2284 return info->xmit_cnt;
2285 } /* end of mgsl_chars_in_buffer() */
2286
2287 /* mgsl_flush_buffer()
2288 *
2289 * Discard all data in the send buffer
2290 *
2291 * Arguments: tty pointer to tty info structure
2292 * Return Value: None
2293 */
2294 static void mgsl_flush_buffer(struct tty_struct *tty)
2295 {
2296 struct mgsl_struct *info = tty->driver_data;
2297 unsigned long flags;
2298
2299 if (debug_level >= DEBUG_LEVEL_INFO)
2300 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2301 __FILE__,__LINE__, info->device_name );
2302
2303 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2304 return;
2305
2306 spin_lock_irqsave(&info->irq_spinlock,flags);
2307 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2308 del_timer(&info->tx_timer);
2309 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2310
2311 tty_wakeup(tty);
2312 }
2313
2314 /* mgsl_send_xchar()
2315 *
2316 * Send a high-priority XON/XOFF character
2317 *
2318 * Arguments: tty pointer to tty info structure
2319 * ch character to send
2320 * Return Value: None
2321 */
2322 static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2323 {
2324 struct mgsl_struct *info = tty->driver_data;
2325 unsigned long flags;
2326
2327 if (debug_level >= DEBUG_LEVEL_INFO)
2328 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2329 __FILE__,__LINE__, info->device_name, ch );
2330
2331 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2332 return;
2333
2334 info->x_char = ch;
2335 if (ch) {
2336 /* Make sure transmit interrupts are on */
2337 spin_lock_irqsave(&info->irq_spinlock,flags);
2338 if (!info->tx_enabled)
2339 usc_start_transmitter(info);
2340 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2341 }
2342 } /* end of mgsl_send_xchar() */
2343
2344 /* mgsl_throttle()
2345 *
2346 * Signal remote device to throttle send data (our receive data)
2347 *
2348 * Arguments: tty pointer to tty info structure
2349 * Return Value: None
2350 */
2351 static void mgsl_throttle(struct tty_struct * tty)
2352 {
2353 struct mgsl_struct *info = tty->driver_data;
2354 unsigned long flags;
2355
2356 if (debug_level >= DEBUG_LEVEL_INFO)
2357 printk("%s(%d):mgsl_throttle(%s) entry\n",
2358 __FILE__,__LINE__, info->device_name );
2359
2360 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2361 return;
2362
2363 if (I_IXOFF(tty))
2364 mgsl_send_xchar(tty, STOP_CHAR(tty));
2365
2366 if (tty->termios.c_cflag & CRTSCTS) {
2367 spin_lock_irqsave(&info->irq_spinlock,flags);
2368 info->serial_signals &= ~SerialSignal_RTS;
2369 usc_set_serial_signals(info);
2370 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2371 }
2372 } /* end of mgsl_throttle() */
2373
2374 /* mgsl_unthrottle()
2375 *
2376 * Signal remote device to stop throttling send data (our receive data)
2377 *
2378 * Arguments: tty pointer to tty info structure
2379 * Return Value: None
2380 */
2381 static void mgsl_unthrottle(struct tty_struct * tty)
2382 {
2383 struct mgsl_struct *info = tty->driver_data;
2384 unsigned long flags;
2385
2386 if (debug_level >= DEBUG_LEVEL_INFO)
2387 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2388 __FILE__,__LINE__, info->device_name );
2389
2390 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2391 return;
2392
2393 if (I_IXOFF(tty)) {
2394 if (info->x_char)
2395 info->x_char = 0;
2396 else
2397 mgsl_send_xchar(tty, START_CHAR(tty));
2398 }
2399
2400 if (tty->termios.c_cflag & CRTSCTS) {
2401 spin_lock_irqsave(&info->irq_spinlock,flags);
2402 info->serial_signals |= SerialSignal_RTS;
2403 usc_set_serial_signals(info);
2404 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2405 }
2406
2407 } /* end of mgsl_unthrottle() */
2408
2409 /* mgsl_get_stats()
2410 *
2411 * get the current serial parameters information
2412 *
2413 * Arguments: info pointer to device instance data
2414 * user_icount pointer to buffer to hold returned stats
2415 *
2416 * Return Value: 0 if success, otherwise error code
2417 */
2418 static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2419 {
2420 int err;
2421
2422 if (debug_level >= DEBUG_LEVEL_INFO)
2423 printk("%s(%d):mgsl_get_params(%s)\n",
2424 __FILE__,__LINE__, info->device_name);
2425
2426 if (!user_icount) {
2427 memset(&info->icount, 0, sizeof(info->icount));
2428 } else {
2429 mutex_lock(&info->port.mutex);
2430 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2431 mutex_unlock(&info->port.mutex);
2432 if (err)
2433 return -EFAULT;
2434 }
2435
2436 return 0;
2437
2438 } /* end of mgsl_get_stats() */
2439
2440 /* mgsl_get_params()
2441 *
2442 * get the current serial parameters information
2443 *
2444 * Arguments: info pointer to device instance data
2445 * user_params pointer to buffer to hold returned params
2446 *
2447 * Return Value: 0 if success, otherwise error code
2448 */
2449 static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2450 {
2451 int err;
2452 if (debug_level >= DEBUG_LEVEL_INFO)
2453 printk("%s(%d):mgsl_get_params(%s)\n",
2454 __FILE__,__LINE__, info->device_name);
2455
2456 mutex_lock(&info->port.mutex);
2457 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2458 mutex_unlock(&info->port.mutex);
2459 if (err) {
2460 if ( debug_level >= DEBUG_LEVEL_INFO )
2461 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2462 __FILE__,__LINE__,info->device_name);
2463 return -EFAULT;
2464 }
2465
2466 return 0;
2467
2468 } /* end of mgsl_get_params() */
2469
2470 /* mgsl_set_params()
2471 *
2472 * set the serial parameters
2473 *
2474 * Arguments:
2475 *
2476 * info pointer to device instance data
2477 * new_params user buffer containing new serial params
2478 *
2479 * Return Value: 0 if success, otherwise error code
2480 */
2481 static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2482 {
2483 unsigned long flags;
2484 MGSL_PARAMS tmp_params;
2485 int err;
2486
2487 if (debug_level >= DEBUG_LEVEL_INFO)
2488 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2489 info->device_name );
2490 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2491 if (err) {
2492 if ( debug_level >= DEBUG_LEVEL_INFO )
2493 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2494 __FILE__,__LINE__,info->device_name);
2495 return -EFAULT;
2496 }
2497
2498 mutex_lock(&info->port.mutex);
2499 spin_lock_irqsave(&info->irq_spinlock,flags);
2500 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2501 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2502
2503 mgsl_change_params(info);
2504 mutex_unlock(&info->port.mutex);
2505
2506 return 0;
2507
2508 } /* end of mgsl_set_params() */
2509
2510 /* mgsl_get_txidle()
2511 *
2512 * get the current transmit idle mode
2513 *
2514 * Arguments: info pointer to device instance data
2515 * idle_mode pointer to buffer to hold returned idle mode
2516 *
2517 * Return Value: 0 if success, otherwise error code
2518 */
2519 static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2520 {
2521 int err;
2522
2523 if (debug_level >= DEBUG_LEVEL_INFO)
2524 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2525 __FILE__,__LINE__, info->device_name, info->idle_mode);
2526
2527 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2528 if (err) {
2529 if ( debug_level >= DEBUG_LEVEL_INFO )
2530 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2531 __FILE__,__LINE__,info->device_name);
2532 return -EFAULT;
2533 }
2534
2535 return 0;
2536
2537 } /* end of mgsl_get_txidle() */
2538
2539 /* mgsl_set_txidle() service ioctl to set transmit idle mode
2540 *
2541 * Arguments: info pointer to device instance data
2542 * idle_mode new idle mode
2543 *
2544 * Return Value: 0 if success, otherwise error code
2545 */
2546 static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2547 {
2548 unsigned long flags;
2549
2550 if (debug_level >= DEBUG_LEVEL_INFO)
2551 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2552 info->device_name, idle_mode );
2553
2554 spin_lock_irqsave(&info->irq_spinlock,flags);
2555 info->idle_mode = idle_mode;
2556 usc_set_txidle( info );
2557 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2558 return 0;
2559
2560 } /* end of mgsl_set_txidle() */
2561
2562 /* mgsl_txenable()
2563 *
2564 * enable or disable the transmitter
2565 *
2566 * Arguments:
2567 *
2568 * info pointer to device instance data
2569 * enable 1 = enable, 0 = disable
2570 *
2571 * Return Value: 0 if success, otherwise error code
2572 */
2573 static int mgsl_txenable(struct mgsl_struct * info, int enable)
2574 {
2575 unsigned long flags;
2576
2577 if (debug_level >= DEBUG_LEVEL_INFO)
2578 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2579 info->device_name, enable);
2580
2581 spin_lock_irqsave(&info->irq_spinlock,flags);
2582 if ( enable ) {
2583 if ( !info->tx_enabled ) {
2584
2585 usc_start_transmitter(info);
2586 /*--------------------------------------------------
2587 * if HDLC/SDLC Loop mode, attempt to insert the
2588 * station in the 'loop' by setting CMR:13. Upon
2589 * receipt of the next GoAhead (RxAbort) sequence,
2590 * the OnLoop indicator (CCSR:7) should go active
2591 * to indicate that we are on the loop
2592 *--------------------------------------------------*/
2593 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2594 usc_loopmode_insert_request( info );
2595 }
2596 } else {
2597 if ( info->tx_enabled )
2598 usc_stop_transmitter(info);
2599 }
2600 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2601 return 0;
2602
2603 } /* end of mgsl_txenable() */
2604
2605 /* mgsl_txabort() abort send HDLC frame
2606 *
2607 * Arguments: info pointer to device instance data
2608 * Return Value: 0 if success, otherwise error code
2609 */
2610 static int mgsl_txabort(struct mgsl_struct * info)
2611 {
2612 unsigned long flags;
2613
2614 if (debug_level >= DEBUG_LEVEL_INFO)
2615 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2616 info->device_name);
2617
2618 spin_lock_irqsave(&info->irq_spinlock,flags);
2619 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2620 {
2621 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2622 usc_loopmode_cancel_transmit( info );
2623 else
2624 usc_TCmd(info,TCmd_SendAbort);
2625 }
2626 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2627 return 0;
2628
2629 } /* end of mgsl_txabort() */
2630
2631 /* mgsl_rxenable() enable or disable the receiver
2632 *
2633 * Arguments: info pointer to device instance data
2634 * enable 1 = enable, 0 = disable
2635 * Return Value: 0 if success, otherwise error code
2636 */
2637 static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2638 {
2639 unsigned long flags;
2640
2641 if (debug_level >= DEBUG_LEVEL_INFO)
2642 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2643 info->device_name, enable);
2644
2645 spin_lock_irqsave(&info->irq_spinlock,flags);
2646 if ( enable ) {
2647 if ( !info->rx_enabled )
2648 usc_start_receiver(info);
2649 } else {
2650 if ( info->rx_enabled )
2651 usc_stop_receiver(info);
2652 }
2653 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2654 return 0;
2655
2656 } /* end of mgsl_rxenable() */
2657
2658 /* mgsl_wait_event() wait for specified event to occur
2659 *
2660 * Arguments: info pointer to device instance data
2661 * mask pointer to bitmask of events to wait for
2662 * Return Value: 0 if successful and bit mask updated with
2663 * of events triggerred,
2664 * otherwise error code
2665 */
2666 static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2667 {
2668 unsigned long flags;
2669 int s;
2670 int rc=0;
2671 struct mgsl_icount cprev, cnow;
2672 int events;
2673 int mask;
2674 struct _input_signal_events oldsigs, newsigs;
2675 DECLARE_WAITQUEUE(wait, current);
2676
2677 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2678 if (rc) {
2679 return -EFAULT;
2680 }
2681
2682 if (debug_level >= DEBUG_LEVEL_INFO)
2683 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2684 info->device_name, mask);
2685
2686 spin_lock_irqsave(&info->irq_spinlock,flags);
2687
2688 /* return immediately if state matches requested events */
2689 usc_get_serial_signals(info);
2690 s = info->serial_signals;
2691 events = mask &
2692 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2693 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2694 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2695 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2696 if (events) {
2697 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2698 goto exit;
2699 }
2700
2701 /* save current irq counts */
2702 cprev = info->icount;
2703 oldsigs = info->input_signal_events;
2704
2705 /* enable hunt and idle irqs if needed */
2706 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2707 u16 oldreg = usc_InReg(info,RICR);
2708 u16 newreg = oldreg +
2709 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2710 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2711 if (oldreg != newreg)
2712 usc_OutReg(info, RICR, newreg);
2713 }
2714
2715 set_current_state(TASK_INTERRUPTIBLE);
2716 add_wait_queue(&info->event_wait_q, &wait);
2717
2718 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2719
2720
2721 for(;;) {
2722 schedule();
2723 if (signal_pending(current)) {
2724 rc = -ERESTARTSYS;
2725 break;
2726 }
2727
2728 /* get current irq counts */
2729 spin_lock_irqsave(&info->irq_spinlock,flags);
2730 cnow = info->icount;
2731 newsigs = info->input_signal_events;
2732 set_current_state(TASK_INTERRUPTIBLE);
2733 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2734
2735 /* if no change, wait aborted for some reason */
2736 if (newsigs.dsr_up == oldsigs.dsr_up &&
2737 newsigs.dsr_down == oldsigs.dsr_down &&
2738 newsigs.dcd_up == oldsigs.dcd_up &&
2739 newsigs.dcd_down == oldsigs.dcd_down &&
2740 newsigs.cts_up == oldsigs.cts_up &&
2741 newsigs.cts_down == oldsigs.cts_down &&
2742 newsigs.ri_up == oldsigs.ri_up &&
2743 newsigs.ri_down == oldsigs.ri_down &&
2744 cnow.exithunt == cprev.exithunt &&
2745 cnow.rxidle == cprev.rxidle) {
2746 rc = -EIO;
2747 break;
2748 }
2749
2750 events = mask &
2751 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2752 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2753 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2754 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2755 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2756 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2757 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2758 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2759 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2760 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2761 if (events)
2762 break;
2763
2764 cprev = cnow;
2765 oldsigs = newsigs;
2766 }
2767
2768 remove_wait_queue(&info->event_wait_q, &wait);
2769 set_current_state(TASK_RUNNING);
2770
2771 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2772 spin_lock_irqsave(&info->irq_spinlock,flags);
2773 if (!waitqueue_active(&info->event_wait_q)) {
2774 /* disable enable exit hunt mode/idle rcvd IRQs */
2775 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2776 ~(RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED));
2777 }
2778 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2779 }
2780 exit:
2781 if ( rc == 0 )
2782 PUT_USER(rc, events, mask_ptr);
2783
2784 return rc;
2785
2786 } /* end of mgsl_wait_event() */
2787
2788 static int modem_input_wait(struct mgsl_struct *info,int arg)
2789 {
2790 unsigned long flags;
2791 int rc;
2792 struct mgsl_icount cprev, cnow;
2793 DECLARE_WAITQUEUE(wait, current);
2794
2795 /* save current irq counts */
2796 spin_lock_irqsave(&info->irq_spinlock,flags);
2797 cprev = info->icount;
2798 add_wait_queue(&info->status_event_wait_q, &wait);
2799 set_current_state(TASK_INTERRUPTIBLE);
2800 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2801
2802 for(;;) {
2803 schedule();
2804 if (signal_pending(current)) {
2805 rc = -ERESTARTSYS;
2806 break;
2807 }
2808
2809 /* get new irq counts */
2810 spin_lock_irqsave(&info->irq_spinlock,flags);
2811 cnow = info->icount;
2812 set_current_state(TASK_INTERRUPTIBLE);
2813 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2814
2815 /* if no change, wait aborted for some reason */
2816 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2817 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2818 rc = -EIO;
2819 break;
2820 }
2821
2822 /* check for change in caller specified modem input */
2823 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2824 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2825 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2826 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2827 rc = 0;
2828 break;
2829 }
2830
2831 cprev = cnow;
2832 }
2833 remove_wait_queue(&info->status_event_wait_q, &wait);
2834 set_current_state(TASK_RUNNING);
2835 return rc;
2836 }
2837
2838 /* return the state of the serial control and status signals
2839 */
2840 static int tiocmget(struct tty_struct *tty)
2841 {
2842 struct mgsl_struct *info = tty->driver_data;
2843 unsigned int result;
2844 unsigned long flags;
2845
2846 spin_lock_irqsave(&info->irq_spinlock,flags);
2847 usc_get_serial_signals(info);
2848 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2849
2850 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2851 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2852 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2853 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2854 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2855 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2856
2857 if (debug_level >= DEBUG_LEVEL_INFO)
2858 printk("%s(%d):%s tiocmget() value=%08X\n",
2859 __FILE__,__LINE__, info->device_name, result );
2860 return result;
2861 }
2862
2863 /* set modem control signals (DTR/RTS)
2864 */
2865 static int tiocmset(struct tty_struct *tty,
2866 unsigned int set, unsigned int clear)
2867 {
2868 struct mgsl_struct *info = tty->driver_data;
2869 unsigned long flags;
2870
2871 if (debug_level >= DEBUG_LEVEL_INFO)
2872 printk("%s(%d):%s tiocmset(%x,%x)\n",
2873 __FILE__,__LINE__,info->device_name, set, clear);
2874
2875 if (set & TIOCM_RTS)
2876 info->serial_signals |= SerialSignal_RTS;
2877 if (set & TIOCM_DTR)
2878 info->serial_signals |= SerialSignal_DTR;
2879 if (clear & TIOCM_RTS)
2880 info->serial_signals &= ~SerialSignal_RTS;
2881 if (clear & TIOCM_DTR)
2882 info->serial_signals &= ~SerialSignal_DTR;
2883
2884 spin_lock_irqsave(&info->irq_spinlock,flags);
2885 usc_set_serial_signals(info);
2886 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2887
2888 return 0;
2889 }
2890
2891 /* mgsl_break() Set or clear transmit break condition
2892 *
2893 * Arguments: tty pointer to tty instance data
2894 * break_state -1=set break condition, 0=clear
2895 * Return Value: error code
2896 */
2897 static int mgsl_break(struct tty_struct *tty, int break_state)
2898 {
2899 struct mgsl_struct * info = tty->driver_data;
2900 unsigned long flags;
2901
2902 if (debug_level >= DEBUG_LEVEL_INFO)
2903 printk("%s(%d):mgsl_break(%s,%d)\n",
2904 __FILE__,__LINE__, info->device_name, break_state);
2905
2906 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
2907 return -EINVAL;
2908
2909 spin_lock_irqsave(&info->irq_spinlock,flags);
2910 if (break_state == -1)
2911 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2912 else
2913 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2914 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2915 return 0;
2916
2917 } /* end of mgsl_break() */
2918
2919 /*
2920 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2921 * Return: write counters to the user passed counter struct
2922 * NB: both 1->0 and 0->1 transitions are counted except for
2923 * RI where only 0->1 is counted.
2924 */
2925 static int msgl_get_icount(struct tty_struct *tty,
2926 struct serial_icounter_struct *icount)
2927
2928 {
2929 struct mgsl_struct * info = tty->driver_data;
2930 struct mgsl_icount cnow; /* kernel counter temps */
2931 unsigned long flags;
2932
2933 spin_lock_irqsave(&info->irq_spinlock,flags);
2934 cnow = info->icount;
2935 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2936
2937 icount->cts = cnow.cts;
2938 icount->dsr = cnow.dsr;
2939 icount->rng = cnow.rng;
2940 icount->dcd = cnow.dcd;
2941 icount->rx = cnow.rx;
2942 icount->tx = cnow.tx;
2943 icount->frame = cnow.frame;
2944 icount->overrun = cnow.overrun;
2945 icount->parity = cnow.parity;
2946 icount->brk = cnow.brk;
2947 icount->buf_overrun = cnow.buf_overrun;
2948 return 0;
2949 }
2950
2951 /* mgsl_ioctl() Service an IOCTL request
2952 *
2953 * Arguments:
2954 *
2955 * tty pointer to tty instance data
2956 * cmd IOCTL command code
2957 * arg command argument/context
2958 *
2959 * Return Value: 0 if success, otherwise error code
2960 */
2961 static int mgsl_ioctl(struct tty_struct *tty,
2962 unsigned int cmd, unsigned long arg)
2963 {
2964 struct mgsl_struct * info = tty->driver_data;
2965
2966 if (debug_level >= DEBUG_LEVEL_INFO)
2967 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2968 info->device_name, cmd );
2969
2970 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2971 return -ENODEV;
2972
2973 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2974 (cmd != TIOCMIWAIT)) {
2975 if (tty->flags & (1 << TTY_IO_ERROR))
2976 return -EIO;
2977 }
2978
2979 return mgsl_ioctl_common(info, cmd, arg);
2980 }
2981
2982 static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2983 {
2984 void __user *argp = (void __user *)arg;
2985
2986 switch (cmd) {
2987 case MGSL_IOCGPARAMS:
2988 return mgsl_get_params(info, argp);
2989 case MGSL_IOCSPARAMS:
2990 return mgsl_set_params(info, argp);
2991 case MGSL_IOCGTXIDLE:
2992 return mgsl_get_txidle(info, argp);
2993 case MGSL_IOCSTXIDLE:
2994 return mgsl_set_txidle(info,(int)arg);
2995 case MGSL_IOCTXENABLE:
2996 return mgsl_txenable(info,(int)arg);
2997 case MGSL_IOCRXENABLE:
2998 return mgsl_rxenable(info,(int)arg);
2999 case MGSL_IOCTXABORT:
3000 return mgsl_txabort(info);
3001 case MGSL_IOCGSTATS:
3002 return mgsl_get_stats(info, argp);
3003 case MGSL_IOCWAITEVENT:
3004 return mgsl_wait_event(info, argp);
3005 case MGSL_IOCLOOPTXDONE:
3006 return mgsl_loopmode_send_done(info);
3007 /* Wait for modem input (DCD,RI,DSR,CTS) change
3008 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
3009 */
3010 case TIOCMIWAIT:
3011 return modem_input_wait(info,(int)arg);
3012
3013 default:
3014 return -ENOIOCTLCMD;
3015 }
3016 return 0;
3017 }
3018
3019 /* mgsl_set_termios()
3020 *
3021 * Set new termios settings
3022 *
3023 * Arguments:
3024 *
3025 * tty pointer to tty structure
3026 * termios pointer to buffer to hold returned old termios
3027 *
3028 * Return Value: None
3029 */
3030 static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
3031 {
3032 struct mgsl_struct *info = tty->driver_data;
3033 unsigned long flags;
3034
3035 if (debug_level >= DEBUG_LEVEL_INFO)
3036 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3037 tty->driver->name );
3038
3039 mgsl_change_params(info);
3040
3041 /* Handle transition to B0 status */
3042 if (old_termios->c_cflag & CBAUD &&
3043 !(tty->termios.c_cflag & CBAUD)) {
3044 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3045 spin_lock_irqsave(&info->irq_spinlock,flags);
3046 usc_set_serial_signals(info);
3047 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3048 }
3049
3050 /* Handle transition away from B0 status */
3051 if (!(old_termios->c_cflag & CBAUD) &&
3052 tty->termios.c_cflag & CBAUD) {
3053 info->serial_signals |= SerialSignal_DTR;
3054 if (!(tty->termios.c_cflag & CRTSCTS) ||
3055 !test_bit(TTY_THROTTLED, &tty->flags)) {
3056 info->serial_signals |= SerialSignal_RTS;
3057 }
3058 spin_lock_irqsave(&info->irq_spinlock,flags);
3059 usc_set_serial_signals(info);
3060 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3061 }
3062
3063 /* Handle turning off CRTSCTS */
3064 if (old_termios->c_cflag & CRTSCTS &&
3065 !(tty->termios.c_cflag & CRTSCTS)) {
3066 tty->hw_stopped = 0;
3067 mgsl_start(tty);
3068 }
3069
3070 } /* end of mgsl_set_termios() */
3071
3072 /* mgsl_close()
3073 *
3074 * Called when port is closed. Wait for remaining data to be
3075 * sent. Disable port and free resources.
3076 *
3077 * Arguments:
3078 *
3079 * tty pointer to open tty structure
3080 * filp pointer to open file object
3081 *
3082 * Return Value: None
3083 */
3084 static void mgsl_close(struct tty_struct *tty, struct file * filp)
3085 {
3086 struct mgsl_struct * info = tty->driver_data;
3087
3088 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3089 return;
3090
3091 if (debug_level >= DEBUG_LEVEL_INFO)
3092 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
3093 __FILE__,__LINE__, info->device_name, info->port.count);
3094
3095 if (tty_port_close_start(&info->port, tty, filp) == 0)
3096 goto cleanup;
3097
3098 mutex_lock(&info->port.mutex);
3099 if (info->port.flags & ASYNC_INITIALIZED)
3100 mgsl_wait_until_sent(tty, info->timeout);
3101 mgsl_flush_buffer(tty);
3102 tty_ldisc_flush(tty);
3103 shutdown(info);
3104 mutex_unlock(&info->port.mutex);
3105
3106 tty_port_close_end(&info->port, tty);
3107 info->port.tty = NULL;
3108 cleanup:
3109 if (debug_level >= DEBUG_LEVEL_INFO)
3110 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
3111 tty->driver->name, info->port.count);
3112
3113 } /* end of mgsl_close() */
3114
3115 /* mgsl_wait_until_sent()
3116 *
3117 * Wait until the transmitter is empty.
3118 *
3119 * Arguments:
3120 *
3121 * tty pointer to tty info structure
3122 * timeout time to wait for send completion
3123 *
3124 * Return Value: None
3125 */
3126 static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3127 {
3128 struct mgsl_struct * info = tty->driver_data;
3129 unsigned long orig_jiffies, char_time;
3130
3131 if (!info )
3132 return;
3133
3134 if (debug_level >= DEBUG_LEVEL_INFO)
3135 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3136 __FILE__,__LINE__, info->device_name );
3137
3138 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3139 return;
3140
3141 if (!(info->port.flags & ASYNC_INITIALIZED))
3142 goto exit;
3143
3144 orig_jiffies = jiffies;
3145
3146 /* Set check interval to 1/5 of estimated time to
3147 * send a character, and make it at least 1. The check
3148 * interval should also be less than the timeout.
3149 * Note: use tight timings here to satisfy the NIST-PCTS.
3150 */
3151
3152 if ( info->params.data_rate ) {
3153 char_time = info->timeout/(32 * 5);
3154 if (!char_time)
3155 char_time++;
3156 } else
3157 char_time = 1;
3158
3159 if (timeout)
3160 char_time = min_t(unsigned long, char_time, timeout);
3161
3162 if ( info->params.mode == MGSL_MODE_HDLC ||
3163 info->params.mode == MGSL_MODE_RAW ) {
3164 while (info->tx_active) {
3165 msleep_interruptible(jiffies_to_msecs(char_time));
3166 if (signal_pending(current))
3167 break;
3168 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3169 break;
3170 }
3171 } else {
3172 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3173 info->tx_enabled) {
3174 msleep_interruptible(jiffies_to_msecs(char_time));
3175 if (signal_pending(current))
3176 break;
3177 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3178 break;
3179 }
3180 }
3181
3182 exit:
3183 if (debug_level >= DEBUG_LEVEL_INFO)
3184 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3185 __FILE__,__LINE__, info->device_name );
3186
3187 } /* end of mgsl_wait_until_sent() */
3188
3189 /* mgsl_hangup()
3190 *
3191 * Called by tty_hangup() when a hangup is signaled.
3192 * This is the same as to closing all open files for the port.
3193 *
3194 * Arguments: tty pointer to associated tty object
3195 * Return Value: None
3196 */
3197 static void mgsl_hangup(struct tty_struct *tty)
3198 {
3199 struct mgsl_struct * info = tty->driver_data;
3200
3201 if (debug_level >= DEBUG_LEVEL_INFO)
3202 printk("%s(%d):mgsl_hangup(%s)\n",
3203 __FILE__,__LINE__, info->device_name );
3204
3205 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3206 return;
3207
3208 mgsl_flush_buffer(tty);
3209 shutdown(info);
3210
3211 info->port.count = 0;
3212 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
3213 info->port.tty = NULL;
3214
3215 wake_up_interruptible(&info->port.open_wait);
3216
3217 } /* end of mgsl_hangup() */
3218
3219 /*
3220 * carrier_raised()
3221 *
3222 * Return true if carrier is raised
3223 */
3224
3225 static int carrier_raised(struct tty_port *port)
3226 {
3227 unsigned long flags;
3228 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3229
3230 spin_lock_irqsave(&info->irq_spinlock, flags);
3231 usc_get_serial_signals(info);
3232 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3233 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3234 }
3235
3236 static void dtr_rts(struct tty_port *port, int on)
3237 {
3238 struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
3239 unsigned long flags;
3240
3241 spin_lock_irqsave(&info->irq_spinlock,flags);
3242 if (on)
3243 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3244 else
3245 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3246 usc_set_serial_signals(info);
3247 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3248 }
3249
3250
3251 /* block_til_ready()
3252 *
3253 * Block the current process until the specified port
3254 * is ready to be opened.
3255 *
3256 * Arguments:
3257 *
3258 * tty pointer to tty info structure
3259 * filp pointer to open file object
3260 * info pointer to device instance data
3261 *
3262 * Return Value: 0 if success, otherwise error code
3263 */
3264 static int block_til_ready(struct tty_struct *tty, struct file * filp,
3265 struct mgsl_struct *info)
3266 {
3267 DECLARE_WAITQUEUE(wait, current);
3268 int retval;
3269 bool do_clocal = false;
3270 unsigned long flags;
3271 int dcd;
3272 struct tty_port *port = &info->port;
3273
3274 if (debug_level >= DEBUG_LEVEL_INFO)
3275 printk("%s(%d):block_til_ready on %s\n",
3276 __FILE__,__LINE__, tty->driver->name );
3277
3278 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3279 /* nonblock mode is set or port is not enabled */
3280 port->flags |= ASYNC_NORMAL_ACTIVE;
3281 return 0;
3282 }
3283
3284 if (tty->termios.c_cflag & CLOCAL)
3285 do_clocal = true;
3286
3287 /* Wait for carrier detect and the line to become
3288 * free (i.e., not in use by the callout). While we are in
3289 * this loop, port->count is dropped by one, so that
3290 * mgsl_close() knows when to free things. We restore it upon
3291 * exit, either normal or abnormal.
3292 */
3293
3294 retval = 0;
3295 add_wait_queue(&port->open_wait, &wait);
3296
3297 if (debug_level >= DEBUG_LEVEL_INFO)
3298 printk("%s(%d):block_til_ready before block on %s count=%d\n",
3299 __FILE__,__LINE__, tty->driver->name, port->count );
3300
3301 spin_lock_irqsave(&info->irq_spinlock, flags);
3302 port->count--;
3303 spin_unlock_irqrestore(&info->irq_spinlock, flags);
3304 port->blocked_open++;
3305
3306 while (1) {
3307 if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
3308 tty_port_raise_dtr_rts(port);
3309
3310 set_current_state(TASK_INTERRUPTIBLE);
3311
3312 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3313 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3314 -EAGAIN : -ERESTARTSYS;
3315 break;
3316 }
3317
3318 dcd = tty_port_carrier_raised(&info->port);
3319 if (do_clocal || dcd)
3320 break;
3321
3322 if (signal_pending(current)) {
3323 retval = -ERESTARTSYS;
3324 break;
3325 }
3326
3327 if (debug_level >= DEBUG_LEVEL_INFO)
3328 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
3329 __FILE__,__LINE__, tty->driver->name, port->count );
3330
3331 tty_unlock(tty);
3332 schedule();
3333 tty_lock(tty);
3334 }
3335
3336 set_current_state(TASK_RUNNING);
3337 remove_wait_queue(&port->open_wait, &wait);
3338
3339 /* FIXME: Racy on hangup during close wait */
3340 if (!tty_hung_up_p(filp))
3341 port->count++;
3342 port->blocked_open--;
3343
3344 if (debug_level >= DEBUG_LEVEL_INFO)
3345 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
3346 __FILE__,__LINE__, tty->driver->name, port->count );
3347
3348 if (!retval)
3349 port->flags |= ASYNC_NORMAL_ACTIVE;
3350
3351 return retval;
3352
3353 } /* end of block_til_ready() */
3354
3355 static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
3356 {
3357 struct mgsl_struct *info;
3358 int line = tty->index;
3359
3360 /* verify range of specified line number */
3361 if (line >= mgsl_device_count) {
3362 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3363 __FILE__, __LINE__, line);
3364 return -ENODEV;
3365 }
3366
3367 /* find the info structure for the specified line */
3368 info = mgsl_device_list;
3369 while (info && info->line != line)
3370 info = info->next_device;
3371 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3372 return -ENODEV;
3373 tty->driver_data = info;
3374
3375 return tty_port_install(&info->port, driver, tty);
3376 }
3377
3378 /* mgsl_open()
3379 *
3380 * Called when a port is opened. Init and enable port.
3381 * Perform serial-specific initialization for the tty structure.
3382 *
3383 * Arguments: tty pointer to tty info structure
3384 * filp associated file pointer
3385 *
3386 * Return Value: 0 if success, otherwise error code
3387 */
3388 static int mgsl_open(struct tty_struct *tty, struct file * filp)
3389 {
3390 struct mgsl_struct *info = tty->driver_data;
3391 unsigned long flags;
3392 int retval;
3393
3394 info->port.tty = tty;
3395
3396 if (debug_level >= DEBUG_LEVEL_INFO)
3397 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
3398 __FILE__,__LINE__,tty->driver->name, info->port.count);
3399
3400 info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
3401
3402 spin_lock_irqsave(&info->netlock, flags);
3403 if (info->netcount) {
3404 retval = -EBUSY;
3405 spin_unlock_irqrestore(&info->netlock, flags);
3406 goto cleanup;
3407 }
3408 info->port.count++;
3409 spin_unlock_irqrestore(&info->netlock, flags);
3410
3411 if (info->port.count == 1) {
3412 /* 1st open on this device, init hardware */
3413 retval = startup(info);
3414 if (retval < 0)
3415 goto cleanup;
3416 }
3417
3418 retval = block_til_ready(tty, filp, info);
3419 if (retval) {
3420 if (debug_level >= DEBUG_LEVEL_INFO)
3421 printk("%s(%d):block_til_ready(%s) returned %d\n",
3422 __FILE__,__LINE__, info->device_name, retval);
3423 goto cleanup;
3424 }
3425
3426 if (debug_level >= DEBUG_LEVEL_INFO)
3427 printk("%s(%d):mgsl_open(%s) success\n",
3428 __FILE__,__LINE__, info->device_name);
3429 retval = 0;
3430
3431 cleanup:
3432 if (retval) {
3433 if (tty->count == 1)
3434 info->port.tty = NULL; /* tty layer will release tty struct */
3435 if(info->port.count)
3436 info->port.count--;
3437 }
3438
3439 return retval;
3440
3441 } /* end of mgsl_open() */
3442
3443 /*
3444 * /proc fs routines....
3445 */
3446
3447 static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
3448 {
3449 char stat_buf[30];
3450 unsigned long flags;
3451
3452 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
3453 seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
3454 info->device_name, info->io_base, info->irq_level,
3455 info->phys_memory_base, info->phys_lcr_base);
3456 } else {
3457 seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
3458 info->device_name, info->io_base,
3459 info->irq_level, info->dma_level);
3460 }
3461
3462 /* output current serial signal states */
3463 spin_lock_irqsave(&info->irq_spinlock,flags);
3464 usc_get_serial_signals(info);
3465 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3466
3467 stat_buf[0] = 0;
3468 stat_buf[1] = 0;
3469 if (info->serial_signals & SerialSignal_RTS)
3470 strcat(stat_buf, "|RTS");
3471 if (info->serial_signals & SerialSignal_CTS)
3472 strcat(stat_buf, "|CTS");
3473 if (info->serial_signals & SerialSignal_DTR)
3474 strcat(stat_buf, "|DTR");
3475 if (info->serial_signals & SerialSignal_DSR)
3476 strcat(stat_buf, "|DSR");
3477 if (info->serial_signals & SerialSignal_DCD)
3478 strcat(stat_buf, "|CD");
3479 if (info->serial_signals & SerialSignal_RI)
3480 strcat(stat_buf, "|RI");
3481
3482 if (info->params.mode == MGSL_MODE_HDLC ||
3483 info->params.mode == MGSL_MODE_RAW ) {
3484 seq_printf(m, " HDLC txok:%d rxok:%d",
3485 info->icount.txok, info->icount.rxok);
3486 if (info->icount.txunder)
3487 seq_printf(m, " txunder:%d", info->icount.txunder);
3488 if (info->icount.txabort)
3489 seq_printf(m, " txabort:%d", info->icount.txabort);
3490 if (info->icount.rxshort)
3491 seq_printf(m, " rxshort:%d", info->icount.rxshort);
3492 if (info->icount.rxlong)
3493 seq_printf(m, " rxlong:%d", info->icount.rxlong);
3494 if (info->icount.rxover)
3495 seq_printf(m, " rxover:%d", info->icount.rxover);
3496 if (info->icount.rxcrc)
3497 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
3498 } else {
3499 seq_printf(m, " ASYNC tx:%d rx:%d",
3500 info->icount.tx, info->icount.rx);
3501 if (info->icount.frame)
3502 seq_printf(m, " fe:%d", info->icount.frame);
3503 if (info->icount.parity)
3504 seq_printf(m, " pe:%d", info->icount.parity);
3505 if (info->icount.brk)
3506 seq_printf(m, " brk:%d", info->icount.brk);
3507 if (info->icount.overrun)
3508 seq_printf(m, " oe:%d", info->icount.overrun);
3509 }
3510
3511 /* Append serial signal status to end */
3512 seq_printf(m, " %s\n", stat_buf+1);
3513
3514 seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
3515 info->tx_active,info->bh_requested,info->bh_running,
3516 info->pending_bh);
3517
3518 spin_lock_irqsave(&info->irq_spinlock,flags);
3519 {
3520 u16 Tcsr = usc_InReg( info, TCSR );
3521 u16 Tdmr = usc_InDmaReg( info, TDMR );
3522 u16 Ticr = usc_InReg( info, TICR );
3523 u16 Rscr = usc_InReg( info, RCSR );
3524 u16 Rdmr = usc_InDmaReg( info, RDMR );
3525 u16 Ricr = usc_InReg( info, RICR );
3526 u16 Icr = usc_InReg( info, ICR );
3527 u16 Dccr = usc_InReg( info, DCCR );
3528 u16 Tmr = usc_InReg( info, TMR );
3529 u16 Tccr = usc_InReg( info, TCCR );
3530 u16 Ccar = inw( info->io_base + CCAR );
3531 seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
3532 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3533 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3534 }
3535 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3536 }
3537
3538 /* Called to print information about devices */
3539 static int mgsl_proc_show(struct seq_file *m, void *v)
3540 {
3541 struct mgsl_struct *info;
3542
3543 seq_printf(m, "synclink driver:%s\n", driver_version);
3544
3545 info = mgsl_device_list;
3546 while( info ) {
3547 line_info(m, info);
3548 info = info->next_device;
3549 }
3550 return 0;
3551 }
3552
3553 static int mgsl_proc_open(struct inode *inode, struct file *file)
3554 {
3555 return single_open(file, mgsl_proc_show, NULL);
3556 }
3557
3558 static const struct file_operations mgsl_proc_fops = {
3559 .owner = THIS_MODULE,
3560 .open = mgsl_proc_open,
3561 .read = seq_read,
3562 .llseek = seq_lseek,
3563 .release = single_release,
3564 };
3565
3566 /* mgsl_allocate_dma_buffers()
3567 *
3568 * Allocate and format DMA buffers (ISA adapter)
3569 * or format shared memory buffers (PCI adapter).
3570 *
3571 * Arguments: info pointer to device instance data
3572 * Return Value: 0 if success, otherwise error
3573 */
3574 static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3575 {
3576 unsigned short BuffersPerFrame;
3577
3578 info->last_mem_alloc = 0;
3579
3580 /* Calculate the number of DMA buffers necessary to hold the */
3581 /* largest allowable frame size. Note: If the max frame size is */
3582 /* not an even multiple of the DMA buffer size then we need to */
3583 /* round the buffer count per frame up one. */
3584
3585 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3586 if ( info->max_frame_size % DMABUFFERSIZE )
3587 BuffersPerFrame++;
3588
3589 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3590 /*
3591 * The PCI adapter has 256KBytes of shared memory to use.
3592 * This is 64 PAGE_SIZE buffers.
3593 *
3594 * The first page is used for padding at this time so the
3595 * buffer list does not begin at offset 0 of the PCI
3596 * adapter's shared memory.
3597 *
3598 * The 2nd page is used for the buffer list. A 4K buffer
3599 * list can hold 128 DMA_BUFFER structures at 32 bytes
3600 * each.
3601 *
3602 * This leaves 62 4K pages.
3603 *
3604 * The next N pages are used for transmit frame(s). We
3605 * reserve enough 4K page blocks to hold the required
3606 * number of transmit dma buffers (num_tx_dma_buffers),
3607 * each of MaxFrameSize size.
3608 *
3609 * Of the remaining pages (62-N), determine how many can
3610 * be used to receive full MaxFrameSize inbound frames
3611 */
3612 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3613 info->rx_buffer_count = 62 - info->tx_buffer_count;
3614 } else {
3615 /* Calculate the number of PAGE_SIZE buffers needed for */
3616 /* receive and transmit DMA buffers. */
3617
3618
3619 /* Calculate the number of DMA buffers necessary to */
3620 /* hold 7 max size receive frames and one max size transmit frame. */
3621 /* The receive buffer count is bumped by one so we avoid an */
3622 /* End of List condition if all receive buffers are used when */
3623 /* using linked list DMA buffers. */
3624
3625 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3626 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3627
3628 /*
3629 * limit total TxBuffers & RxBuffers to 62 4K total
3630 * (ala PCI Allocation)
3631 */
3632
3633 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3634 info->rx_buffer_count = 62 - info->tx_buffer_count;
3635
3636 }
3637
3638 if ( debug_level >= DEBUG_LEVEL_INFO )
3639 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3640 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3641
3642 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3643 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3644 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3645 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3646 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3647 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3648 return -ENOMEM;
3649 }
3650
3651 mgsl_reset_rx_dma_buffers( info );
3652 mgsl_reset_tx_dma_buffers( info );
3653
3654 return 0;
3655
3656 } /* end of mgsl_allocate_dma_buffers() */
3657
3658 /*
3659 * mgsl_alloc_buffer_list_memory()
3660 *
3661 * Allocate a common DMA buffer for use as the
3662 * receive and transmit buffer lists.
3663 *
3664 * A buffer list is a set of buffer entries where each entry contains
3665 * a pointer to an actual buffer and a pointer to the next buffer entry
3666 * (plus some other info about the buffer).
3667 *
3668 * The buffer entries for a list are built to form a circular list so
3669 * that when the entire list has been traversed you start back at the
3670 * beginning.
3671 *
3672 * This function allocates memory for just the buffer entries.
3673 * The links (pointer to next entry) are filled in with the physical
3674 * address of the next entry so the adapter can navigate the list
3675 * using bus master DMA. The pointers to the actual buffers are filled
3676 * out later when the actual buffers are allocated.
3677 *
3678 * Arguments: info pointer to device instance data
3679 * Return Value: 0 if success, otherwise error
3680 */
3681 static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3682 {
3683 unsigned int i;
3684
3685 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3686 /* PCI adapter uses shared memory. */
3687 info->buffer_list = info->memory_base + info->last_mem_alloc;
3688 info->buffer_list_phys = info->last_mem_alloc;
3689 info->last_mem_alloc += BUFFERLISTSIZE;
3690 } else {
3691 /* ISA adapter uses system memory. */
3692 /* The buffer lists are allocated as a common buffer that both */
3693 /* the processor and adapter can access. This allows the driver to */
3694 /* inspect portions of the buffer while other portions are being */
3695 /* updated by the adapter using Bus Master DMA. */
3696
3697 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3698 if (info->buffer_list == NULL)
3699 return -ENOMEM;
3700 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
3701 }
3702
3703 /* We got the memory for the buffer entry lists. */
3704 /* Initialize the memory block to all zeros. */
3705 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3706
3707 /* Save virtual address pointers to the receive and */
3708 /* transmit buffer lists. (Receive 1st). These pointers will */
3709 /* be used by the processor to access the lists. */
3710 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3711 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3712 info->tx_buffer_list += info->rx_buffer_count;
3713
3714 /*
3715 * Build the links for the buffer entry lists such that
3716 * two circular lists are built. (Transmit and Receive).
3717 *
3718 * Note: the links are physical addresses
3719 * which are read by the adapter to determine the next
3720 * buffer entry to use.
3721 */
3722
3723 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3724 /* calculate and store physical address of this buffer entry */
3725 info->rx_buffer_list[i].phys_entry =
3726 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3727
3728 /* calculate and store physical address of */
3729 /* next entry in cirular list of entries */
3730
3731 info->rx_buffer_list[i].link = info->buffer_list_phys;
3732
3733 if ( i < info->rx_buffer_count - 1 )
3734 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3735 }
3736
3737 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3738 /* calculate and store physical address of this buffer entry */
3739 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3740 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3741
3742 /* calculate and store physical address of */
3743 /* next entry in cirular list of entries */
3744
3745 info->tx_buffer_list[i].link = info->buffer_list_phys +
3746 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3747
3748 if ( i < info->tx_buffer_count - 1 )
3749 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3750 }
3751
3752 return 0;
3753
3754 } /* end of mgsl_alloc_buffer_list_memory() */
3755
3756 /* Free DMA buffers allocated for use as the
3757 * receive and transmit buffer lists.
3758 * Warning:
3759 *
3760 * The data transfer buffers associated with the buffer list
3761 * MUST be freed before freeing the buffer list itself because
3762 * the buffer list contains the information necessary to free
3763 * the individual buffers!
3764 */
3765 static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3766 {
3767 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3768 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
3769
3770 info->buffer_list = NULL;
3771 info->rx_buffer_list = NULL;
3772 info->tx_buffer_list = NULL;
3773
3774 } /* end of mgsl_free_buffer_list_memory() */
3775
3776 /*
3777 * mgsl_alloc_frame_memory()
3778 *
3779 * Allocate the frame DMA buffers used by the specified buffer list.
3780 * Each DMA buffer will be one memory page in size. This is necessary
3781 * because memory can fragment enough that it may be impossible
3782 * contiguous pages.
3783 *
3784 * Arguments:
3785 *
3786 * info pointer to device instance data
3787 * BufferList pointer to list of buffer entries
3788 * Buffercount count of buffer entries in buffer list
3789 *
3790 * Return Value: 0 if success, otherwise -ENOMEM
3791 */
3792 static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3793 {
3794 int i;
3795 u32 phys_addr;
3796
3797 /* Allocate page sized buffers for the receive buffer list */
3798
3799 for ( i = 0; i < Buffercount; i++ ) {
3800 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3801 /* PCI adapter uses shared memory buffers. */
3802 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3803 phys_addr = info->last_mem_alloc;
3804 info->last_mem_alloc += DMABUFFERSIZE;
3805 } else {
3806 /* ISA adapter uses system memory. */
3807 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3808 if (BufferList[i].virt_addr == NULL)
3809 return -ENOMEM;
3810 phys_addr = (u32)(BufferList[i].dma_addr);
3811 }
3812 BufferList[i].phys_addr = phys_addr;
3813 }
3814
3815 return 0;
3816
3817 } /* end of mgsl_alloc_frame_memory() */
3818
3819 /*
3820 * mgsl_free_frame_memory()
3821 *
3822 * Free the buffers associated with
3823 * each buffer entry of a buffer list.
3824 *
3825 * Arguments:
3826 *
3827 * info pointer to device instance data
3828 * BufferList pointer to list of buffer entries
3829 * Buffercount count of buffer entries in buffer list
3830 *
3831 * Return Value: None
3832 */
3833 static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3834 {
3835 int i;
3836
3837 if ( BufferList ) {
3838 for ( i = 0 ; i < Buffercount ; i++ ) {
3839 if ( BufferList[i].virt_addr ) {
3840 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
3841 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
3842 BufferList[i].virt_addr = NULL;
3843 }
3844 }
3845 }
3846
3847 } /* end of mgsl_free_frame_memory() */
3848
3849 /* mgsl_free_dma_buffers()
3850 *
3851 * Free DMA buffers
3852 *
3853 * Arguments: info pointer to device instance data
3854 * Return Value: None
3855 */
3856 static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3857 {
3858 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3859 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3860 mgsl_free_buffer_list_memory( info );
3861
3862 } /* end of mgsl_free_dma_buffers() */
3863
3864
3865 /*
3866 * mgsl_alloc_intermediate_rxbuffer_memory()
3867 *
3868 * Allocate a buffer large enough to hold max_frame_size. This buffer
3869 * is used to pass an assembled frame to the line discipline.
3870 *
3871 * Arguments:
3872 *
3873 * info pointer to device instance data
3874 *
3875 * Return Value: 0 if success, otherwise -ENOMEM
3876 */
3877 static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3878 {
3879 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3880 if ( info->intermediate_rxbuffer == NULL )
3881 return -ENOMEM;
3882 /* unused flag buffer to satisfy receive_buf calling interface */
3883 info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3884 if (!info->flag_buf) {
3885 kfree(info->intermediate_rxbuffer);
3886 info->intermediate_rxbuffer = NULL;
3887 return -ENOMEM;
3888 }
3889 return 0;
3890
3891 } /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3892
3893 /*
3894 * mgsl_free_intermediate_rxbuffer_memory()
3895 *
3896 *
3897 * Arguments:
3898 *
3899 * info pointer to device instance data
3900 *
3901 * Return Value: None
3902 */
3903 static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3904 {
3905 kfree(info->intermediate_rxbuffer);
3906 info->intermediate_rxbuffer = NULL;
3907 kfree(info->flag_buf);
3908 info->flag_buf = NULL;
3909
3910 } /* end of mgsl_free_intermediate_rxbuffer_memory() */
3911
3912 /*
3913 * mgsl_alloc_intermediate_txbuffer_memory()
3914 *
3915 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3916 * This buffer is used to load transmit frames into the adapter's dma transfer
3917 * buffers when there is sufficient space.
3918 *
3919 * Arguments:
3920 *
3921 * info pointer to device instance data
3922 *
3923 * Return Value: 0 if success, otherwise -ENOMEM
3924 */
3925 static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3926 {
3927 int i;
3928
3929 if ( debug_level >= DEBUG_LEVEL_INFO )
3930 printk("%s %s(%d) allocating %d tx holding buffers\n",
3931 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3932
3933 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3934
3935 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3936 info->tx_holding_buffers[i].buffer =
3937 kmalloc(info->max_frame_size, GFP_KERNEL);
3938 if (info->tx_holding_buffers[i].buffer == NULL) {
3939 for (--i; i >= 0; i--) {
3940 kfree(info->tx_holding_buffers[i].buffer);
3941 info->tx_holding_buffers[i].buffer = NULL;
3942 }
3943 return -ENOMEM;
3944 }
3945 }
3946
3947 return 0;
3948
3949 } /* end of mgsl_alloc_intermediate_txbuffer_memory() */
3950
3951 /*
3952 * mgsl_free_intermediate_txbuffer_memory()
3953 *
3954 *
3955 * Arguments:
3956 *
3957 * info pointer to device instance data
3958 *
3959 * Return Value: None
3960 */
3961 static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
3962 {
3963 int i;
3964
3965 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
3966 kfree(info->tx_holding_buffers[i].buffer);
3967 info->tx_holding_buffers[i].buffer = NULL;
3968 }
3969
3970 info->get_tx_holding_index = 0;
3971 info->put_tx_holding_index = 0;
3972 info->tx_holding_count = 0;
3973
3974 } /* end of mgsl_free_intermediate_txbuffer_memory() */
3975
3976
3977 /*
3978 * load_next_tx_holding_buffer()
3979 *
3980 * attempts to load the next buffered tx request into the
3981 * tx dma buffers
3982 *
3983 * Arguments:
3984 *
3985 * info pointer to device instance data
3986 *
3987 * Return Value: true if next buffered tx request loaded
3988 * into adapter's tx dma buffer,
3989 * false otherwise
3990 */
3991 static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
3992 {
3993 bool ret = false;
3994
3995 if ( info->tx_holding_count ) {
3996 /* determine if we have enough tx dma buffers
3997 * to accommodate the next tx frame
3998 */
3999 struct tx_holding_buffer *ptx =
4000 &info->tx_holding_buffers[info->get_tx_holding_index];
4001 int num_free = num_free_tx_dma_buffers(info);
4002 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
4003 if ( ptx->buffer_size % DMABUFFERSIZE )
4004 ++num_needed;
4005
4006 if (num_needed <= num_free) {
4007 info->xmit_cnt = ptx->buffer_size;
4008 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
4009
4010 --info->tx_holding_count;
4011 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
4012 info->get_tx_holding_index=0;
4013
4014 /* restart transmit timer */
4015 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4016
4017 ret = true;
4018 }
4019 }
4020
4021 return ret;
4022 }
4023
4024 /*
4025 * save_tx_buffer_request()
4026 *
4027 * attempt to store transmit frame request for later transmission
4028 *
4029 * Arguments:
4030 *
4031 * info pointer to device instance data
4032 * Buffer pointer to buffer containing frame to load
4033 * BufferSize size in bytes of frame in Buffer
4034 *
4035 * Return Value: 1 if able to store, 0 otherwise
4036 */
4037 static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4038 {
4039 struct tx_holding_buffer *ptx;
4040
4041 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4042 return 0; /* all buffers in use */
4043 }
4044
4045 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4046 ptx->buffer_size = BufferSize;
4047 memcpy( ptx->buffer, Buffer, BufferSize);
4048
4049 ++info->tx_holding_count;
4050 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4051 info->put_tx_holding_index=0;
4052
4053 return 1;
4054 }
4055
4056 static int mgsl_claim_resources(struct mgsl_struct *info)
4057 {
4058 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4059 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4060 __FILE__,__LINE__,info->device_name, info->io_base);
4061 return -ENODEV;
4062 }
4063 info->io_addr_requested = true;
4064
4065 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4066 info->device_name, info ) < 0 ) {
4067 printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
4068 __FILE__,__LINE__,info->device_name, info->irq_level );
4069 goto errout;
4070 }
4071 info->irq_requested = true;
4072
4073 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4074 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4075 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4076 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4077 goto errout;
4078 }
4079 info->shared_mem_requested = true;
4080 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4081 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4082 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4083 goto errout;
4084 }
4085 info->lcr_mem_requested = true;
4086
4087 info->memory_base = ioremap_nocache(info->phys_memory_base,
4088 0x40000);
4089 if (!info->memory_base) {
4090 printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
4091 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4092 goto errout;
4093 }
4094
4095 if ( !mgsl_memory_test(info) ) {
4096 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4097 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4098 goto errout;
4099 }
4100
4101 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
4102 PAGE_SIZE);
4103 if (!info->lcr_base) {
4104 printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
4105 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4106 goto errout;
4107 }
4108 info->lcr_base += info->lcr_offset;
4109
4110 } else {
4111 /* claim DMA channel */
4112
4113 if (request_dma(info->dma_level,info->device_name) < 0){
4114 printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
4115 __FILE__,__LINE__,info->device_name, info->dma_level );
4116 mgsl_release_resources( info );
4117 return -ENODEV;
4118 }
4119 info->dma_requested = true;
4120
4121 /* ISA adapter uses bus master DMA */
4122 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4123 enable_dma(info->dma_level);
4124 }
4125
4126 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4127 printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
4128 __FILE__,__LINE__,info->device_name, info->dma_level );
4129 goto errout;
4130 }
4131
4132 return 0;
4133 errout:
4134 mgsl_release_resources(info);
4135 return -ENODEV;
4136
4137 } /* end of mgsl_claim_resources() */
4138
4139 static void mgsl_release_resources(struct mgsl_struct *info)
4140 {
4141 if ( debug_level >= DEBUG_LEVEL_INFO )
4142 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4143 __FILE__,__LINE__,info->device_name );
4144
4145 if ( info->irq_requested ) {
4146 free_irq(info->irq_level, info);
4147 info->irq_requested = false;
4148 }
4149 if ( info->dma_requested ) {
4150 disable_dma(info->dma_level);
4151 free_dma(info->dma_level);
4152 info->dma_requested = false;
4153 }
4154 mgsl_free_dma_buffers(info);
4155 mgsl_free_intermediate_rxbuffer_memory(info);
4156 mgsl_free_intermediate_txbuffer_memory(info);
4157
4158 if ( info->io_addr_requested ) {
4159 release_region(info->io_base,info->io_addr_size);
4160 info->io_addr_requested = false;
4161 }
4162 if ( info->shared_mem_requested ) {
4163 release_mem_region(info->phys_memory_base,0x40000);
4164 info->shared_mem_requested = false;
4165 }
4166 if ( info->lcr_mem_requested ) {
4167 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
4168 info->lcr_mem_requested = false;
4169 }
4170 if (info->memory_base){
4171 iounmap(info->memory_base);
4172 info->memory_base = NULL;
4173 }
4174 if (info->lcr_base){
4175 iounmap(info->lcr_base - info->lcr_offset);
4176 info->lcr_base = NULL;
4177 }
4178
4179 if ( debug_level >= DEBUG_LEVEL_INFO )
4180 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4181 __FILE__,__LINE__,info->device_name );
4182
4183 } /* end of mgsl_release_resources() */
4184
4185 /* mgsl_add_device()
4186 *
4187 * Add the specified device instance data structure to the
4188 * global linked list of devices and increment the device count.
4189 *
4190 * Arguments: info pointer to device instance data
4191 * Return Value: None
4192 */
4193 static void mgsl_add_device( struct mgsl_struct *info )
4194 {
4195 info->next_device = NULL;
4196 info->line = mgsl_device_count;
4197 sprintf(info->device_name,"ttySL%d",info->line);
4198
4199 if (info->line < MAX_TOTAL_DEVICES) {
4200 if (maxframe[info->line])
4201 info->max_frame_size = maxframe[info->line];
4202
4203 if (txdmabufs[info->line]) {
4204 info->num_tx_dma_buffers = txdmabufs[info->line];
4205 if (info->num_tx_dma_buffers < 1)
4206 info->num_tx_dma_buffers = 1;
4207 }
4208
4209 if (txholdbufs[info->line]) {
4210 info->num_tx_holding_buffers = txholdbufs[info->line];
4211 if (info->num_tx_holding_buffers < 1)
4212 info->num_tx_holding_buffers = 1;
4213 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4214 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4215 }
4216 }
4217
4218 mgsl_device_count++;
4219
4220 if ( !mgsl_device_list )
4221 mgsl_device_list = info;
4222 else {
4223 struct mgsl_struct *current_dev = mgsl_device_list;
4224 while( current_dev->next_device )
4225 current_dev = current_dev->next_device;
4226 current_dev->next_device = info;
4227 }
4228
4229 if ( info->max_frame_size < 4096 )
4230 info->max_frame_size = 4096;
4231 else if ( info->max_frame_size > 65535 )
4232 info->max_frame_size = 65535;
4233
4234 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4235 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4236 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4237 info->phys_memory_base, info->phys_lcr_base,
4238 info->max_frame_size );
4239 } else {
4240 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4241 info->device_name, info->io_base, info->irq_level, info->dma_level,
4242 info->max_frame_size );
4243 }
4244
4245 #if SYNCLINK_GENERIC_HDLC
4246 hdlcdev_init(info);
4247 #endif
4248
4249 } /* end of mgsl_add_device() */
4250
4251 static const struct tty_port_operations mgsl_port_ops = {
4252 .carrier_raised = carrier_raised,
4253 .dtr_rts = dtr_rts,
4254 };
4255
4256
4257 /* mgsl_allocate_device()
4258 *
4259 * Allocate and initialize a device instance structure
4260 *
4261 * Arguments: none
4262 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4263 */
4264 static struct mgsl_struct* mgsl_allocate_device(void)
4265 {
4266 struct mgsl_struct *info;
4267
4268 info = kzalloc(sizeof(struct mgsl_struct),
4269 GFP_KERNEL);
4270
4271 if (!info) {
4272 printk("Error can't allocate device instance data\n");
4273 } else {
4274 tty_port_init(&info->port);
4275 info->port.ops = &mgsl_port_ops;
4276 info->magic = MGSL_MAGIC;
4277 INIT_WORK(&info->task, mgsl_bh_handler);
4278 info->max_frame_size = 4096;
4279 info->port.close_delay = 5*HZ/10;
4280 info->port.closing_wait = 30*HZ;
4281 init_waitqueue_head(&info->status_event_wait_q);
4282 init_waitqueue_head(&info->event_wait_q);
4283 spin_lock_init(&info->irq_spinlock);
4284 spin_lock_init(&info->netlock);
4285 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4286 info->idle_mode = HDLC_TXIDLE_FLAGS;
4287 info->num_tx_dma_buffers = 1;
4288 info->num_tx_holding_buffers = 0;
4289 }
4290
4291 return info;
4292
4293 } /* end of mgsl_allocate_device()*/
4294
4295 static const struct tty_operations mgsl_ops = {
4296 .install = mgsl_install,
4297 .open = mgsl_open,
4298 .close = mgsl_close,
4299 .write = mgsl_write,
4300 .put_char = mgsl_put_char,
4301 .flush_chars = mgsl_flush_chars,
4302 .write_room = mgsl_write_room,
4303 .chars_in_buffer = mgsl_chars_in_buffer,
4304 .flush_buffer = mgsl_flush_buffer,
4305 .ioctl = mgsl_ioctl,
4306 .throttle = mgsl_throttle,
4307 .unthrottle = mgsl_unthrottle,
4308 .send_xchar = mgsl_send_xchar,
4309 .break_ctl = mgsl_break,
4310 .wait_until_sent = mgsl_wait_until_sent,
4311 .set_termios = mgsl_set_termios,
4312 .stop = mgsl_stop,
4313 .start = mgsl_start,
4314 .hangup = mgsl_hangup,
4315 .tiocmget = tiocmget,
4316 .tiocmset = tiocmset,
4317 .get_icount = msgl_get_icount,
4318 .proc_fops = &mgsl_proc_fops,
4319 };
4320
4321 /*
4322 * perform tty device initialization
4323 */
4324 static int mgsl_init_tty(void)
4325 {
4326 int rc;
4327
4328 serial_driver = alloc_tty_driver(128);
4329 if (!serial_driver)
4330 return -ENOMEM;
4331
4332 serial_driver->driver_name = "synclink";
4333 serial_driver->name = "ttySL";
4334 serial_driver->major = ttymajor;
4335 serial_driver->minor_start = 64;
4336 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4337 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4338 serial_driver->init_termios = tty_std_termios;
4339 serial_driver->init_termios.c_cflag =
4340 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4341 serial_driver->init_termios.c_ispeed = 9600;
4342 serial_driver->init_termios.c_ospeed = 9600;
4343 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4344 tty_set_operations(serial_driver, &mgsl_ops);
4345 if ((rc = tty_register_driver(serial_driver)) < 0) {
4346 printk("%s(%d):Couldn't register serial driver\n",
4347 __FILE__,__LINE__);
4348 put_tty_driver(serial_driver);
4349 serial_driver = NULL;
4350 return rc;
4351 }
4352
4353 printk("%s %s, tty major#%d\n",
4354 driver_name, driver_version,
4355 serial_driver->major);
4356 return 0;
4357 }
4358
4359 /* enumerate user specified ISA adapters
4360 */
4361 static void mgsl_enum_isa_devices(void)
4362 {
4363 struct mgsl_struct *info;
4364 int i;
4365
4366 /* Check for user specified ISA devices */
4367
4368 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4369 if ( debug_level >= DEBUG_LEVEL_INFO )
4370 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4371 io[i], irq[i], dma[i] );
4372
4373 info = mgsl_allocate_device();
4374 if ( !info ) {
4375 /* error allocating device instance data */
4376 if ( debug_level >= DEBUG_LEVEL_ERROR )
4377 printk( "can't allocate device instance data.\n");
4378 continue;
4379 }
4380
4381 /* Copy user configuration info to device instance data */
4382 info->io_base = (unsigned int)io[i];
4383 info->irq_level = (unsigned int)irq[i];
4384 info->irq_level = irq_canonicalize(info->irq_level);
4385 info->dma_level = (unsigned int)dma[i];
4386 info->bus_type = MGSL_BUS_TYPE_ISA;
4387 info->io_addr_size = 16;
4388 info->irq_flags = 0;
4389
4390 mgsl_add_device( info );
4391 }
4392 }
4393
4394 static void synclink_cleanup(void)
4395 {
4396 int rc;
4397 struct mgsl_struct *info;
4398 struct mgsl_struct *tmp;
4399
4400 printk("Unloading %s: %s\n", driver_name, driver_version);
4401
4402 if (serial_driver) {
4403 rc = tty_unregister_driver(serial_driver);
4404 if (rc)
4405 printk("%s(%d) failed to unregister tty driver err=%d\n",
4406 __FILE__,__LINE__,rc);
4407 put_tty_driver(serial_driver);
4408 }
4409
4410 info = mgsl_device_list;
4411 while(info) {
4412 #if SYNCLINK_GENERIC_HDLC
4413 hdlcdev_exit(info);
4414 #endif
4415 mgsl_release_resources(info);
4416 tmp = info;
4417 info = info->next_device;
4418 tty_port_destroy(&tmp->port);
4419 kfree(tmp);
4420 }
4421
4422 if (pci_registered)
4423 pci_unregister_driver(&synclink_pci_driver);
4424 }
4425
4426 static int __init synclink_init(void)
4427 {
4428 int rc;
4429
4430 if (break_on_load) {
4431 mgsl_get_text_ptr();
4432 BREAKPOINT();
4433 }
4434
4435 printk("%s %s\n", driver_name, driver_version);
4436
4437 mgsl_enum_isa_devices();
4438 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4439 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4440 else
4441 pci_registered = true;
4442
4443 if ((rc = mgsl_init_tty()) < 0)
4444 goto error;
4445
4446 return 0;
4447
4448 error:
4449 synclink_cleanup();
4450 return rc;
4451 }
4452
4453 static void __exit synclink_exit(void)
4454 {
4455 synclink_cleanup();
4456 }
4457
4458 module_init(synclink_init);
4459 module_exit(synclink_exit);
4460
4461 /*
4462 * usc_RTCmd()
4463 *
4464 * Issue a USC Receive/Transmit command to the
4465 * Channel Command/Address Register (CCAR).
4466 *
4467 * Notes:
4468 *
4469 * The command is encoded in the most significant 5 bits <15..11>
4470 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4471 * and Bits <6..0> must be written as zeros.
4472 *
4473 * Arguments:
4474 *
4475 * info pointer to device information structure
4476 * Cmd command mask (use symbolic macros)
4477 *
4478 * Return Value:
4479 *
4480 * None
4481 */
4482 static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4483 {
4484 /* output command to CCAR in bits <15..11> */
4485 /* preserve bits <10..7>, bits <6..0> must be zero */
4486
4487 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4488
4489 /* Read to flush write to CCAR */
4490 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4491 inw( info->io_base + CCAR );
4492
4493 } /* end of usc_RTCmd() */
4494
4495 /*
4496 * usc_DmaCmd()
4497 *
4498 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4499 *
4500 * Arguments:
4501 *
4502 * info pointer to device information structure
4503 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4504 *
4505 * Return Value:
4506 *
4507 * None
4508 */
4509 static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4510 {
4511 /* write command mask to DCAR */
4512 outw( Cmd + info->mbre_bit, info->io_base );
4513
4514 /* Read to flush write to DCAR */
4515 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4516 inw( info->io_base );
4517
4518 } /* end of usc_DmaCmd() */
4519
4520 /*
4521 * usc_OutDmaReg()
4522 *
4523 * Write a 16-bit value to a USC DMA register
4524 *
4525 * Arguments:
4526 *
4527 * info pointer to device info structure
4528 * RegAddr register address (number) for write
4529 * RegValue 16-bit value to write to register
4530 *
4531 * Return Value:
4532 *
4533 * None
4534 *
4535 */
4536 static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4537 {
4538 /* Note: The DCAR is located at the adapter base address */
4539 /* Note: must preserve state of BIT8 in DCAR */
4540
4541 outw( RegAddr + info->mbre_bit, info->io_base );
4542 outw( RegValue, info->io_base );
4543
4544 /* Read to flush write to DCAR */
4545 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4546 inw( info->io_base );
4547
4548 } /* end of usc_OutDmaReg() */
4549
4550 /*
4551 * usc_InDmaReg()
4552 *
4553 * Read a 16-bit value from a DMA register
4554 *
4555 * Arguments:
4556 *
4557 * info pointer to device info structure
4558 * RegAddr register address (number) to read from
4559 *
4560 * Return Value:
4561 *
4562 * The 16-bit value read from register
4563 *
4564 */
4565 static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4566 {
4567 /* Note: The DCAR is located at the adapter base address */
4568 /* Note: must preserve state of BIT8 in DCAR */
4569
4570 outw( RegAddr + info->mbre_bit, info->io_base );
4571 return inw( info->io_base );
4572
4573 } /* end of usc_InDmaReg() */
4574
4575 /*
4576 *
4577 * usc_OutReg()
4578 *
4579 * Write a 16-bit value to a USC serial channel register
4580 *
4581 * Arguments:
4582 *
4583 * info pointer to device info structure
4584 * RegAddr register address (number) to write to
4585 * RegValue 16-bit value to write to register
4586 *
4587 * Return Value:
4588 *
4589 * None
4590 *
4591 */
4592 static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4593 {
4594 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4595 outw( RegValue, info->io_base + CCAR );
4596
4597 /* Read to flush write to CCAR */
4598 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4599 inw( info->io_base + CCAR );
4600
4601 } /* end of usc_OutReg() */
4602
4603 /*
4604 * usc_InReg()
4605 *
4606 * Reads a 16-bit value from a USC serial channel register
4607 *
4608 * Arguments:
4609 *
4610 * info pointer to device extension
4611 * RegAddr register address (number) to read from
4612 *
4613 * Return Value:
4614 *
4615 * 16-bit value read from register
4616 */
4617 static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4618 {
4619 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4620 return inw( info->io_base + CCAR );
4621
4622 } /* end of usc_InReg() */
4623
4624 /* usc_set_sdlc_mode()
4625 *
4626 * Set up the adapter for SDLC DMA communications.
4627 *
4628 * Arguments: info pointer to device instance data
4629 * Return Value: NONE
4630 */
4631 static void usc_set_sdlc_mode( struct mgsl_struct *info )
4632 {
4633 u16 RegValue;
4634 bool PreSL1660;
4635
4636 /*
4637 * determine if the IUSC on the adapter is pre-SL1660. If
4638 * not, take advantage of the UnderWait feature of more
4639 * modern chips. If an underrun occurs and this bit is set,
4640 * the transmitter will idle the programmed idle pattern
4641 * until the driver has time to service the underrun. Otherwise,
4642 * the dma controller may get the cycles previously requested
4643 * and begin transmitting queued tx data.
4644 */
4645 usc_OutReg(info,TMCR,0x1f);
4646 RegValue=usc_InReg(info,TMDR);
4647 PreSL1660 = (RegValue == IUSC_PRE_SL1660);
4648
4649 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4650 {
4651 /*
4652 ** Channel Mode Register (CMR)
4653 **
4654 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4655 ** <13> 0 0 = Transmit Disabled (initially)
4656 ** <12> 0 1 = Consecutive Idles share common 0
4657 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4658 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4659 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4660 **
4661 ** 1000 1110 0000 0110 = 0x8e06
4662 */
4663 RegValue = 0x8e06;
4664
4665 /*--------------------------------------------------
4666 * ignore user options for UnderRun Actions and
4667 * preambles
4668 *--------------------------------------------------*/
4669 }
4670 else
4671 {
4672 /* Channel mode Register (CMR)
4673 *
4674 * <15..14> 00 Tx Sub modes, Underrun Action
4675 * <13> 0 1 = Send Preamble before opening flag
4676 * <12> 0 1 = Consecutive Idles share common 0
4677 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4678 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4679 * <3..0> 0110 Receiver mode = HDLC/SDLC
4680 *
4681 * 0000 0110 0000 0110 = 0x0606
4682 */
4683 if (info->params.mode == MGSL_MODE_RAW) {
4684 RegValue = 0x0001; /* Set Receive mode = external sync */
4685
4686 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4687 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4688
4689 /*
4690 * TxSubMode:
4691 * CMR <15> 0 Don't send CRC on Tx Underrun
4692 * CMR <14> x undefined
4693 * CMR <13> 0 Send preamble before openning sync
4694 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4695 *
4696 * TxMode:
4697 * CMR <11-8) 0100 MonoSync
4698 *
4699 * 0x00 0100 xxxx xxxx 04xx
4700 */
4701 RegValue |= 0x0400;
4702 }
4703 else {
4704
4705 RegValue = 0x0606;
4706
4707 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4708 RegValue |= BIT14;
4709 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4710 RegValue |= BIT15;
4711 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4712 RegValue |= BIT15 | BIT14;
4713 }
4714
4715 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4716 RegValue |= BIT13;
4717 }
4718
4719 if ( info->params.mode == MGSL_MODE_HDLC &&
4720 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4721 RegValue |= BIT12;
4722
4723 if ( info->params.addr_filter != 0xff )
4724 {
4725 /* set up receive address filtering */
4726 usc_OutReg( info, RSR, info->params.addr_filter );
4727 RegValue |= BIT4;
4728 }
4729
4730 usc_OutReg( info, CMR, RegValue );
4731 info->cmr_value = RegValue;
4732
4733 /* Receiver mode Register (RMR)
4734 *
4735 * <15..13> 000 encoding
4736 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4737 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4738 * <9> 0 1 = Include Receive chars in CRC
4739 * <8> 1 1 = Use Abort/PE bit as abort indicator
4740 * <7..6> 00 Even parity
4741 * <5> 0 parity disabled
4742 * <4..2> 000 Receive Char Length = 8 bits
4743 * <1..0> 00 Disable Receiver
4744 *
4745 * 0000 0101 0000 0000 = 0x0500
4746 */
4747
4748 RegValue = 0x0500;
4749
4750 switch ( info->params.encoding ) {
4751 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4752 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4753 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break;
4754 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4755 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break;
4756 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break;
4757 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
4758 }
4759
4760 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4761 RegValue |= BIT9;
4762 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4763 RegValue |= ( BIT12 | BIT10 | BIT9 );
4764
4765 usc_OutReg( info, RMR, RegValue );
4766
4767 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4768 /* When an opening flag of an SDLC frame is recognized the */
4769 /* Receive Character count (RCC) is loaded with the value in */
4770 /* RCLR. The RCC is decremented for each received byte. The */
4771 /* value of RCC is stored after the closing flag of the frame */
4772 /* allowing the frame size to be computed. */
4773
4774 usc_OutReg( info, RCLR, RCLRVALUE );
4775
4776 usc_RCmd( info, RCmd_SelectRicrdma_level );
4777
4778 /* Receive Interrupt Control Register (RICR)
4779 *
4780 * <15..8> ? RxFIFO DMA Request Level
4781 * <7> 0 Exited Hunt IA (Interrupt Arm)
4782 * <6> 0 Idle Received IA
4783 * <5> 0 Break/Abort IA
4784 * <4> 0 Rx Bound IA
4785 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4786 * <2> 0 Abort/PE IA
4787 * <1> 1 Rx Overrun IA
4788 * <0> 0 Select TC0 value for readback
4789 *
4790 * 0000 0000 0000 1000 = 0x000a
4791 */
4792
4793 /* Carry over the Exit Hunt and Idle Received bits */
4794 /* in case they have been armed by usc_ArmEvents. */
4795
4796 RegValue = usc_InReg( info, RICR ) & 0xc0;
4797
4798 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4799 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4800 else
4801 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4802
4803 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4804
4805 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4806 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4807
4808 /* Transmit mode Register (TMR)
4809 *
4810 * <15..13> 000 encoding
4811 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4812 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4813 * <9> 0 1 = Tx CRC Enabled
4814 * <8> 0 1 = Append CRC to end of transmit frame
4815 * <7..6> 00 Transmit parity Even
4816 * <5> 0 Transmit parity Disabled
4817 * <4..2> 000 Tx Char Length = 8 bits
4818 * <1..0> 00 Disable Transmitter
4819 *
4820 * 0000 0100 0000 0000 = 0x0400
4821 */
4822
4823 RegValue = 0x0400;
4824
4825 switch ( info->params.encoding ) {
4826 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4827 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4828 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 | BIT13; break;
4829 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4830 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 | BIT13; break;
4831 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14; break;
4832 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 | BIT14 | BIT13; break;
4833 }
4834
4835 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4836 RegValue |= BIT9 | BIT8;
4837 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4838 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4839
4840 usc_OutReg( info, TMR, RegValue );
4841
4842 usc_set_txidle( info );
4843
4844
4845 usc_TCmd( info, TCmd_SelectTicrdma_level );
4846
4847 /* Transmit Interrupt Control Register (TICR)
4848 *
4849 * <15..8> ? Transmit FIFO DMA Level
4850 * <7> 0 Present IA (Interrupt Arm)
4851 * <6> 0 Idle Sent IA
4852 * <5> 1 Abort Sent IA
4853 * <4> 1 EOF/EOM Sent IA
4854 * <3> 0 CRC Sent IA
4855 * <2> 1 1 = Wait for SW Trigger to Start Frame
4856 * <1> 1 Tx Underrun IA
4857 * <0> 0 TC0 constant on read back
4858 *
4859 * 0000 0000 0011 0110 = 0x0036
4860 */
4861
4862 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4863 usc_OutReg( info, TICR, 0x0736 );
4864 else
4865 usc_OutReg( info, TICR, 0x1436 );
4866
4867 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4868 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4869
4870 /*
4871 ** Transmit Command/Status Register (TCSR)
4872 **
4873 ** <15..12> 0000 TCmd
4874 ** <11> 0/1 UnderWait
4875 ** <10..08> 000 TxIdle
4876 ** <7> x PreSent
4877 ** <6> x IdleSent
4878 ** <5> x AbortSent
4879 ** <4> x EOF/EOM Sent
4880 ** <3> x CRC Sent
4881 ** <2> x All Sent
4882 ** <1> x TxUnder
4883 ** <0> x TxEmpty
4884 **
4885 ** 0000 0000 0000 0000 = 0x0000
4886 */
4887 info->tcsr_value = 0;
4888
4889 if ( !PreSL1660 )
4890 info->tcsr_value |= TCSR_UNDERWAIT;
4891
4892 usc_OutReg( info, TCSR, info->tcsr_value );
4893
4894 /* Clock mode Control Register (CMCR)
4895 *
4896 * <15..14> 00 counter 1 Source = Disabled
4897 * <13..12> 00 counter 0 Source = Disabled
4898 * <11..10> 11 BRG1 Input is TxC Pin
4899 * <9..8> 11 BRG0 Input is TxC Pin
4900 * <7..6> 01 DPLL Input is BRG1 Output
4901 * <5..3> XXX TxCLK comes from Port 0
4902 * <2..0> XXX RxCLK comes from Port 1
4903 *
4904 * 0000 1111 0111 0111 = 0x0f77
4905 */
4906
4907 RegValue = 0x0f40;
4908
4909 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4910 RegValue |= 0x0003; /* RxCLK from DPLL */
4911 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4912 RegValue |= 0x0004; /* RxCLK from BRG0 */
4913 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4914 RegValue |= 0x0006; /* RxCLK from TXC Input */
4915 else
4916 RegValue |= 0x0007; /* RxCLK from Port1 */
4917
4918 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4919 RegValue |= 0x0018; /* TxCLK from DPLL */
4920 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4921 RegValue |= 0x0020; /* TxCLK from BRG0 */
4922 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4923 RegValue |= 0x0038; /* RxCLK from TXC Input */
4924 else
4925 RegValue |= 0x0030; /* TxCLK from Port0 */
4926
4927 usc_OutReg( info, CMCR, RegValue );
4928
4929
4930 /* Hardware Configuration Register (HCR)
4931 *
4932 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4933 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4934 * <12> 0 CVOK:0=report code violation in biphase
4935 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4936 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4937 * <7..6> 00 reserved
4938 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4939 * <4> X BRG1 Enable
4940 * <3..2> 00 reserved
4941 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4942 * <0> 0 BRG0 Enable
4943 */
4944
4945 RegValue = 0x0000;
4946
4947 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL | HDLC_FLAG_TXC_DPLL) ) {
4948 u32 XtalSpeed;
4949 u32 DpllDivisor;
4950 u16 Tc;
4951
4952 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
4953 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
4954
4955 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4956 XtalSpeed = 11059200;
4957 else
4958 XtalSpeed = 14745600;
4959
4960 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4961 DpllDivisor = 16;
4962 RegValue |= BIT10;
4963 }
4964 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4965 DpllDivisor = 8;
4966 RegValue |= BIT11;
4967 }
4968 else
4969 DpllDivisor = 32;
4970
4971 /* Tc = (Xtal/Speed) - 1 */
4972 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
4973 /* then rounding up gives a more precise time constant. Instead */
4974 /* of rounding up and then subtracting 1 we just don't subtract */
4975 /* the one in this case. */
4976
4977 /*--------------------------------------------------
4978 * ejz: for DPLL mode, application should use the
4979 * same clock speed as the partner system, even
4980 * though clocking is derived from the input RxData.
4981 * In case the user uses a 0 for the clock speed,
4982 * default to 0xffffffff and don't try to divide by
4983 * zero
4984 *--------------------------------------------------*/
4985 if ( info->params.clock_speed )
4986 {
4987 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
4988 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
4989 / info->params.clock_speed) )
4990 Tc--;
4991 }
4992 else
4993 Tc = -1;
4994
4995
4996 /* Write 16-bit Time Constant for BRG1 */
4997 usc_OutReg( info, TC1R, Tc );
4998
4999 RegValue |= BIT4; /* enable BRG1 */
5000
5001 switch ( info->params.encoding ) {
5002 case HDLC_ENCODING_NRZ:
5003 case HDLC_ENCODING_NRZB:
5004 case HDLC_ENCODING_NRZI_MARK:
5005 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
5006 case HDLC_ENCODING_BIPHASE_MARK:
5007 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
5008 case HDLC_ENCODING_BIPHASE_LEVEL:
5009 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 | BIT8; break;
5010 }
5011 }
5012
5013 usc_OutReg( info, HCR, RegValue );
5014
5015
5016 /* Channel Control/status Register (CCSR)
5017 *
5018 * <15> X RCC FIFO Overflow status (RO)
5019 * <14> X RCC FIFO Not Empty status (RO)
5020 * <13> 0 1 = Clear RCC FIFO (WO)
5021 * <12> X DPLL Sync (RW)
5022 * <11> X DPLL 2 Missed Clocks status (RO)
5023 * <10> X DPLL 1 Missed Clock status (RO)
5024 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5025 * <7> X SDLC Loop On status (RO)
5026 * <6> X SDLC Loop Send status (RO)
5027 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5028 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5029 * <1..0> 00 reserved
5030 *
5031 * 0000 0000 0010 0000 = 0x0020
5032 */
5033
5034 usc_OutReg( info, CCSR, 0x1020 );
5035
5036
5037 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5038 usc_OutReg( info, SICR,
5039 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5040 }
5041
5042
5043 /* enable Master Interrupt Enable bit (MIE) */
5044 usc_EnableMasterIrqBit( info );
5045
5046 usc_ClearIrqPendingBits( info, RECEIVE_STATUS | RECEIVE_DATA |
5047 TRANSMIT_STATUS | TRANSMIT_DATA | MISC);
5048
5049 /* arm RCC underflow interrupt */
5050 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5051 usc_EnableInterrupts(info, MISC);
5052
5053 info->mbre_bit = 0;
5054 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5055 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5056 info->mbre_bit = BIT8;
5057 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5058
5059 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5060 /* Enable DMAEN (Port 7, Bit 14) */
5061 /* This connects the DMA request signal to the ISA bus */
5062 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5063 }
5064
5065 /* DMA Control Register (DCR)
5066 *
5067 * <15..14> 10 Priority mode = Alternating Tx/Rx
5068 * 01 Rx has priority
5069 * 00 Tx has priority
5070 *
5071 * <13> 1 Enable Priority Preempt per DCR<15..14>
5072 * (WARNING DCR<11..10> must be 00 when this is 1)
5073 * 0 Choose activate channel per DCR<11..10>
5074 *
5075 * <12> 0 Little Endian for Array/List
5076 * <11..10> 00 Both Channels can use each bus grant
5077 * <9..6> 0000 reserved
5078 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5079 * <4> 0 1 = drive D/C and S/D pins
5080 * <3> 1 1 = Add one wait state to all DMA cycles.
5081 * <2> 0 1 = Strobe /UAS on every transfer.
5082 * <1..0> 11 Addr incrementing only affects LS24 bits
5083 *
5084 * 0110 0000 0000 1011 = 0x600b
5085 */
5086
5087 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5088 /* PCI adapter does not need DMA wait state */
5089 usc_OutDmaReg( info, DCR, 0xa00b );
5090 }
5091 else
5092 usc_OutDmaReg( info, DCR, 0x800b );
5093
5094
5095 /* Receive DMA mode Register (RDMR)
5096 *
5097 * <15..14> 11 DMA mode = Linked List Buffer mode
5098 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5099 * <12> 1 Clear count of List Entry after fetching
5100 * <11..10> 00 Address mode = Increment
5101 * <9> 1 Terminate Buffer on RxBound
5102 * <8> 0 Bus Width = 16bits
5103 * <7..0> ? status Bits (write as 0s)
5104 *
5105 * 1111 0010 0000 0000 = 0xf200
5106 */
5107
5108 usc_OutDmaReg( info, RDMR, 0xf200 );
5109
5110
5111 /* Transmit DMA mode Register (TDMR)
5112 *
5113 * <15..14> 11 DMA mode = Linked List Buffer mode
5114 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5115 * <12> 1 Clear count of List Entry after fetching
5116 * <11..10> 00 Address mode = Increment
5117 * <9> 1 Terminate Buffer on end of frame
5118 * <8> 0 Bus Width = 16bits
5119 * <7..0> ? status Bits (Read Only so write as 0)
5120 *
5121 * 1111 0010 0000 0000 = 0xf200
5122 */
5123
5124 usc_OutDmaReg( info, TDMR, 0xf200 );
5125
5126
5127 /* DMA Interrupt Control Register (DICR)
5128 *
5129 * <15> 1 DMA Interrupt Enable
5130 * <14> 0 1 = Disable IEO from USC
5131 * <13> 0 1 = Don't provide vector during IntAck
5132 * <12> 1 1 = Include status in Vector
5133 * <10..2> 0 reserved, Must be 0s
5134 * <1> 0 1 = Rx DMA Interrupt Enabled
5135 * <0> 0 1 = Tx DMA Interrupt Enabled
5136 *
5137 * 1001 0000 0000 0000 = 0x9000
5138 */
5139
5140 usc_OutDmaReg( info, DICR, 0x9000 );
5141
5142 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5143 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5144 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5145
5146 /* Channel Control Register (CCR)
5147 *
5148 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5149 * <13> 0 Trigger Tx on SW Command Disabled
5150 * <12> 0 Flag Preamble Disabled
5151 * <11..10> 00 Preamble Length
5152 * <9..8> 00 Preamble Pattern
5153 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5154 * <5> 0 Trigger Rx on SW Command Disabled
5155 * <4..0> 0 reserved
5156 *
5157 * 1000 0000 1000 0000 = 0x8080
5158 */
5159
5160 RegValue = 0x8080;
5161
5162 switch ( info->params.preamble_length ) {
5163 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5164 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5165 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 | BIT10; break;
5166 }
5167
5168 switch ( info->params.preamble ) {
5169 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 | BIT12; break;
5170 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5171 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5172 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 | BIT8; break;
5173 }
5174
5175 usc_OutReg( info, CCR, RegValue );
5176
5177
5178 /*
5179 * Burst/Dwell Control Register
5180 *
5181 * <15..8> 0x20 Maximum number of transfers per bus grant
5182 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5183 */
5184
5185 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5186 /* don't limit bus occupancy on PCI adapter */
5187 usc_OutDmaReg( info, BDCR, 0x0000 );
5188 }
5189 else
5190 usc_OutDmaReg( info, BDCR, 0x2000 );
5191
5192 usc_stop_transmitter(info);
5193 usc_stop_receiver(info);
5194
5195 } /* end of usc_set_sdlc_mode() */
5196
5197 /* usc_enable_loopback()
5198 *
5199 * Set the 16C32 for internal loopback mode.
5200 * The TxCLK and RxCLK signals are generated from the BRG0 and
5201 * the TxD is looped back to the RxD internally.
5202 *
5203 * Arguments: info pointer to device instance data
5204 * enable 1 = enable loopback, 0 = disable
5205 * Return Value: None
5206 */
5207 static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5208 {
5209 if (enable) {
5210 /* blank external TXD output */
5211 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6));
5212
5213 /* Clock mode Control Register (CMCR)
5214 *
5215 * <15..14> 00 counter 1 Disabled
5216 * <13..12> 00 counter 0 Disabled
5217 * <11..10> 11 BRG1 Input is TxC Pin
5218 * <9..8> 11 BRG0 Input is TxC Pin
5219 * <7..6> 01 DPLL Input is BRG1 Output
5220 * <5..3> 100 TxCLK comes from BRG0
5221 * <2..0> 100 RxCLK comes from BRG0
5222 *
5223 * 0000 1111 0110 0100 = 0x0f64
5224 */
5225
5226 usc_OutReg( info, CMCR, 0x0f64 );
5227
5228 /* Write 16-bit Time Constant for BRG0 */
5229 /* use clock speed if available, otherwise use 8 for diagnostics */
5230 if (info->params.clock_speed) {
5231 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5232 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5233 else
5234 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5235 } else
5236 usc_OutReg(info, TC0R, (u16)8);
5237
5238 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5239 mode = Continuous Set Bit 0 to enable BRG0. */
5240 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5241
5242 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5243 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5244
5245 /* set Internal Data loopback mode */
5246 info->loopback_bits = 0x300;
5247 outw( 0x0300, info->io_base + CCAR );
5248 } else {
5249 /* enable external TXD output */
5250 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6));
5251
5252 /* clear Internal Data loopback mode */
5253 info->loopback_bits = 0;
5254 outw( 0,info->io_base + CCAR );
5255 }
5256
5257 } /* end of usc_enable_loopback() */
5258
5259 /* usc_enable_aux_clock()
5260 *
5261 * Enabled the AUX clock output at the specified frequency.
5262 *
5263 * Arguments:
5264 *
5265 * info pointer to device extension
5266 * data_rate data rate of clock in bits per second
5267 * A data rate of 0 disables the AUX clock.
5268 *
5269 * Return Value: None
5270 */
5271 static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5272 {
5273 u32 XtalSpeed;
5274 u16 Tc;
5275
5276 if ( data_rate ) {
5277 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5278 XtalSpeed = 11059200;
5279 else
5280 XtalSpeed = 14745600;
5281
5282
5283 /* Tc = (Xtal/Speed) - 1 */
5284 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5285 /* then rounding up gives a more precise time constant. Instead */
5286 /* of rounding up and then subtracting 1 we just don't subtract */
5287 /* the one in this case. */
5288
5289
5290 Tc = (u16)(XtalSpeed/data_rate);
5291 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5292 Tc--;
5293
5294 /* Write 16-bit Time Constant for BRG0 */
5295 usc_OutReg( info, TC0R, Tc );
5296
5297 /*
5298 * Hardware Configuration Register (HCR)
5299 * Clear Bit 1, BRG0 mode = Continuous
5300 * Set Bit 0 to enable BRG0.
5301 */
5302
5303 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5304
5305 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5306 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5307 } else {
5308 /* data rate == 0 so turn off BRG0 */
5309 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5310 }
5311
5312 } /* end of usc_enable_aux_clock() */
5313
5314 /*
5315 *
5316 * usc_process_rxoverrun_sync()
5317 *
5318 * This function processes a receive overrun by resetting the
5319 * receive DMA buffers and issuing a Purge Rx FIFO command
5320 * to allow the receiver to continue receiving.
5321 *
5322 * Arguments:
5323 *
5324 * info pointer to device extension
5325 *
5326 * Return Value: None
5327 */
5328 static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5329 {
5330 int start_index;
5331 int end_index;
5332 int frame_start_index;
5333 bool start_of_frame_found = false;
5334 bool end_of_frame_found = false;
5335 bool reprogram_dma = false;
5336
5337 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5338 u32 phys_addr;
5339
5340 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5341 usc_RCmd( info, RCmd_EnterHuntmode );
5342 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5343
5344 /* CurrentRxBuffer points to the 1st buffer of the next */
5345 /* possibly available receive frame. */
5346
5347 frame_start_index = start_index = end_index = info->current_rx_buffer;
5348
5349 /* Search for an unfinished string of buffers. This means */
5350 /* that a receive frame started (at least one buffer with */
5351 /* count set to zero) but there is no terminiting buffer */
5352 /* (status set to non-zero). */
5353
5354 while( !buffer_list[end_index].count )
5355 {
5356 /* Count field has been reset to zero by 16C32. */
5357 /* This buffer is currently in use. */
5358
5359 if ( !start_of_frame_found )
5360 {
5361 start_of_frame_found = true;
5362 frame_start_index = end_index;
5363 end_of_frame_found = false;
5364 }
5365
5366 if ( buffer_list[end_index].status )
5367 {
5368 /* Status field has been set by 16C32. */
5369 /* This is the last buffer of a received frame. */
5370
5371 /* We want to leave the buffers for this frame intact. */
5372 /* Move on to next possible frame. */
5373
5374 start_of_frame_found = false;
5375 end_of_frame_found = true;
5376 }
5377
5378 /* advance to next buffer entry in linked list */
5379 end_index++;
5380 if ( end_index == info->rx_buffer_count )
5381 end_index = 0;
5382
5383 if ( start_index == end_index )
5384 {
5385 /* The entire list has been searched with all Counts == 0 and */
5386 /* all Status == 0. The receive buffers are */
5387 /* completely screwed, reset all receive buffers! */
5388 mgsl_reset_rx_dma_buffers( info );
5389 frame_start_index = 0;
5390 start_of_frame_found = false;
5391 reprogram_dma = true;
5392 break;
5393 }
5394 }
5395
5396 if ( start_of_frame_found && !end_of_frame_found )
5397 {
5398 /* There is an unfinished string of receive DMA buffers */
5399 /* as a result of the receiver overrun. */
5400
5401 /* Reset the buffers for the unfinished frame */
5402 /* and reprogram the receive DMA controller to start */
5403 /* at the 1st buffer of unfinished frame. */
5404
5405 start_index = frame_start_index;
5406
5407 do
5408 {
5409 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5410
5411 /* Adjust index for wrap around. */
5412 if ( start_index == info->rx_buffer_count )
5413 start_index = 0;
5414
5415 } while( start_index != end_index );
5416
5417 reprogram_dma = true;
5418 }
5419
5420 if ( reprogram_dma )
5421 {
5422 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5423 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5424 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5425
5426 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5427
5428 /* This empties the receive FIFO and loads the RCC with RCLR */
5429 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5430
5431 /* program 16C32 with physical address of 1st DMA buffer entry */
5432 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5433 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5434 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5435
5436 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5437 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5438 usc_EnableInterrupts( info, RECEIVE_STATUS );
5439
5440 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5441 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5442
5443 usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
5444 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5445 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5446 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5447 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5448 else
5449 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5450 }
5451 else
5452 {
5453 /* This empties the receive FIFO and loads the RCC with RCLR */
5454 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5455 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5456 }
5457
5458 } /* end of usc_process_rxoverrun_sync() */
5459
5460 /* usc_stop_receiver()
5461 *
5462 * Disable USC receiver
5463 *
5464 * Arguments: info pointer to device instance data
5465 * Return Value: None
5466 */
5467 static void usc_stop_receiver( struct mgsl_struct *info )
5468 {
5469 if (debug_level >= DEBUG_LEVEL_ISR)
5470 printk("%s(%d):usc_stop_receiver(%s)\n",
5471 __FILE__,__LINE__, info->device_name );
5472
5473 /* Disable receive DMA channel. */
5474 /* This also disables receive DMA channel interrupts */
5475 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5476
5477 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5478 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5479 usc_DisableInterrupts( info, RECEIVE_DATA | RECEIVE_STATUS );
5480
5481 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5482
5483 /* This empties the receive FIFO and loads the RCC with RCLR */
5484 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5485 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5486
5487 info->rx_enabled = false;
5488 info->rx_overflow = false;
5489 info->rx_rcc_underrun = false;
5490
5491 } /* end of stop_receiver() */
5492
5493 /* usc_start_receiver()
5494 *
5495 * Enable the USC receiver
5496 *
5497 * Arguments: info pointer to device instance data
5498 * Return Value: None
5499 */
5500 static void usc_start_receiver( struct mgsl_struct *info )
5501 {
5502 u32 phys_addr;
5503
5504 if (debug_level >= DEBUG_LEVEL_ISR)
5505 printk("%s(%d):usc_start_receiver(%s)\n",
5506 __FILE__,__LINE__, info->device_name );
5507
5508 mgsl_reset_rx_dma_buffers( info );
5509 usc_stop_receiver( info );
5510
5511 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5512 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5513
5514 if ( info->params.mode == MGSL_MODE_HDLC ||
5515 info->params.mode == MGSL_MODE_RAW ) {
5516 /* DMA mode Transfers */
5517 /* Program the DMA controller. */
5518 /* Enable the DMA controller end of buffer interrupt. */
5519
5520 /* program 16C32 with physical address of 1st DMA buffer entry */
5521 phys_addr = info->rx_buffer_list[0].phys_entry;
5522 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5523 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5524
5525 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5526 usc_ClearIrqPendingBits( info, RECEIVE_DATA | RECEIVE_STATUS );
5527 usc_EnableInterrupts( info, RECEIVE_STATUS );
5528
5529 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5530 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5531
5532 usc_OutDmaReg( info, RDIAR, BIT3 | BIT2 );
5533 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5534 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5535 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5536 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5537 else
5538 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5539 } else {
5540 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5541 usc_ClearIrqPendingBits(info, RECEIVE_DATA | RECEIVE_STATUS);
5542 usc_EnableInterrupts(info, RECEIVE_DATA);
5543
5544 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5545 usc_RCmd( info, RCmd_EnterHuntmode );
5546
5547 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5548 }
5549
5550 usc_OutReg( info, CCSR, 0x1020 );
5551
5552 info->rx_enabled = true;
5553
5554 } /* end of usc_start_receiver() */
5555
5556 /* usc_start_transmitter()
5557 *
5558 * Enable the USC transmitter and send a transmit frame if
5559 * one is loaded in the DMA buffers.
5560 *
5561 * Arguments: info pointer to device instance data
5562 * Return Value: None
5563 */
5564 static void usc_start_transmitter( struct mgsl_struct *info )
5565 {
5566 u32 phys_addr;
5567 unsigned int FrameSize;
5568
5569 if (debug_level >= DEBUG_LEVEL_ISR)
5570 printk("%s(%d):usc_start_transmitter(%s)\n",
5571 __FILE__,__LINE__, info->device_name );
5572
5573 if ( info->xmit_cnt ) {
5574
5575 /* If auto RTS enabled and RTS is inactive, then assert */
5576 /* RTS and set a flag indicating that the driver should */
5577 /* negate RTS when the transmission completes. */
5578
5579 info->drop_rts_on_tx_done = false;
5580
5581 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5582 usc_get_serial_signals( info );
5583 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5584 info->serial_signals |= SerialSignal_RTS;
5585 usc_set_serial_signals( info );
5586 info->drop_rts_on_tx_done = true;
5587 }
5588 }
5589
5590
5591 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5592 if ( !info->tx_active ) {
5593 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5594 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5595 usc_EnableInterrupts(info, TRANSMIT_DATA);
5596 usc_load_txfifo(info);
5597 }
5598 } else {
5599 /* Disable transmit DMA controller while programming. */
5600 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5601
5602 /* Transmit DMA buffer is loaded, so program USC */
5603 /* to send the frame contained in the buffers. */
5604
5605 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5606
5607 /* if operating in Raw sync mode, reset the rcc component
5608 * of the tx dma buffer entry, otherwise, the serial controller
5609 * will send a closing sync char after this count.
5610 */
5611 if ( info->params.mode == MGSL_MODE_RAW )
5612 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5613
5614 /* Program the Transmit Character Length Register (TCLR) */
5615 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5616 usc_OutReg( info, TCLR, (u16)FrameSize );
5617
5618 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5619
5620 /* Program the address of the 1st DMA Buffer Entry in linked list */
5621 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5622 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5623 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5624
5625 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5626 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5627 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5628
5629 if ( info->params.mode == MGSL_MODE_RAW &&
5630 info->num_tx_dma_buffers > 1 ) {
5631 /* When running external sync mode, attempt to 'stream' transmit */
5632 /* by filling tx dma buffers as they become available. To do this */
5633 /* we need to enable Tx DMA EOB Status interrupts : */
5634 /* */
5635 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5636 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5637
5638 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5639 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5640 }
5641
5642 /* Initialize Transmit DMA Channel */
5643 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5644
5645 usc_TCmd( info, TCmd_SendFrame );
5646
5647 mod_timer(&info->tx_timer, jiffies +
5648 msecs_to_jiffies(5000));
5649 }
5650 info->tx_active = true;
5651 }
5652
5653 if ( !info->tx_enabled ) {
5654 info->tx_enabled = true;
5655 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5656 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5657 else
5658 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5659 }
5660
5661 } /* end of usc_start_transmitter() */
5662
5663 /* usc_stop_transmitter()
5664 *
5665 * Stops the transmitter and DMA
5666 *
5667 * Arguments: info pointer to device isntance data
5668 * Return Value: None
5669 */
5670 static void usc_stop_transmitter( struct mgsl_struct *info )
5671 {
5672 if (debug_level >= DEBUG_LEVEL_ISR)
5673 printk("%s(%d):usc_stop_transmitter(%s)\n",
5674 __FILE__,__LINE__, info->device_name );
5675
5676 del_timer(&info->tx_timer);
5677
5678 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5679 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5680 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5681
5682 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5683 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5684 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5685
5686 info->tx_enabled = false;
5687 info->tx_active = false;
5688
5689 } /* end of usc_stop_transmitter() */
5690
5691 /* usc_load_txfifo()
5692 *
5693 * Fill the transmit FIFO until the FIFO is full or
5694 * there is no more data to load.
5695 *
5696 * Arguments: info pointer to device extension (instance data)
5697 * Return Value: None
5698 */
5699 static void usc_load_txfifo( struct mgsl_struct *info )
5700 {
5701 int Fifocount;
5702 u8 TwoBytes[2];
5703
5704 if ( !info->xmit_cnt && !info->x_char )
5705 return;
5706
5707 /* Select transmit FIFO status readback in TICR */
5708 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5709
5710 /* load the Transmit FIFO until FIFOs full or all data sent */
5711
5712 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5713 /* there is more space in the transmit FIFO and */
5714 /* there is more data in transmit buffer */
5715
5716 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5717 /* write a 16-bit word from transmit buffer to 16C32 */
5718
5719 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5720 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5721 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5722 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5723
5724 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5725
5726 info->xmit_cnt -= 2;
5727 info->icount.tx += 2;
5728 } else {
5729 /* only 1 byte left to transmit or 1 FIFO slot left */
5730
5731 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5732 info->io_base + CCAR );
5733
5734 if (info->x_char) {
5735 /* transmit pending high priority char */
5736 outw( info->x_char,info->io_base + CCAR );
5737 info->x_char = 0;
5738 } else {
5739 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5740 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5741 info->xmit_cnt--;
5742 }
5743 info->icount.tx++;
5744 }
5745 }
5746
5747 } /* end of usc_load_txfifo() */
5748
5749 /* usc_reset()
5750 *
5751 * Reset the adapter to a known state and prepare it for further use.
5752 *
5753 * Arguments: info pointer to device instance data
5754 * Return Value: None
5755 */
5756 static void usc_reset( struct mgsl_struct *info )
5757 {
5758 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5759 int i;
5760 u32 readval;
5761
5762 /* Set BIT30 of Misc Control Register */
5763 /* (Local Control Register 0x50) to force reset of USC. */
5764
5765 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5766 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5767
5768 info->misc_ctrl_value |= BIT30;
5769 *MiscCtrl = info->misc_ctrl_value;
5770
5771 /*
5772 * Force at least 170ns delay before clearing
5773 * reset bit. Each read from LCR takes at least
5774 * 30ns so 10 times for 300ns to be safe.
5775 */
5776 for(i=0;i<10;i++)
5777 readval = *MiscCtrl;
5778
5779 info->misc_ctrl_value &= ~BIT30;
5780 *MiscCtrl = info->misc_ctrl_value;
5781
5782 *LCR0BRDR = BUS_DESCRIPTOR(
5783 1, // Write Strobe Hold (0-3)
5784 2, // Write Strobe Delay (0-3)
5785 2, // Read Strobe Delay (0-3)
5786 0, // NWDD (Write data-data) (0-3)
5787 4, // NWAD (Write Addr-data) (0-31)
5788 0, // NXDA (Read/Write Data-Addr) (0-3)
5789 0, // NRDD (Read Data-Data) (0-3)
5790 5 // NRAD (Read Addr-Data) (0-31)
5791 );
5792 } else {
5793 /* do HW reset */
5794 outb( 0,info->io_base + 8 );
5795 }
5796
5797 info->mbre_bit = 0;
5798 info->loopback_bits = 0;
5799 info->usc_idle_mode = 0;
5800
5801 /*
5802 * Program the Bus Configuration Register (BCR)
5803 *
5804 * <15> 0 Don't use separate address
5805 * <14..6> 0 reserved
5806 * <5..4> 00 IAckmode = Default, don't care
5807 * <3> 1 Bus Request Totem Pole output
5808 * <2> 1 Use 16 Bit data bus
5809 * <1> 0 IRQ Totem Pole output
5810 * <0> 0 Don't Shift Right Addr
5811 *
5812 * 0000 0000 0000 1100 = 0x000c
5813 *
5814 * By writing to io_base + SDPIN the Wait/Ack pin is
5815 * programmed to work as a Wait pin.
5816 */
5817
5818 outw( 0x000c,info->io_base + SDPIN );
5819
5820
5821 outw( 0,info->io_base );
5822 outw( 0,info->io_base + CCAR );
5823
5824 /* select little endian byte ordering */
5825 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5826
5827
5828 /* Port Control Register (PCR)
5829 *
5830 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5831 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5832 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5833 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5834 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5835 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5836 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5837 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5838 *
5839 * 1111 0000 1111 0101 = 0xf0f5
5840 */
5841
5842 usc_OutReg( info, PCR, 0xf0f5 );
5843
5844
5845 /*
5846 * Input/Output Control Register
5847 *
5848 * <15..14> 00 CTS is active low input
5849 * <13..12> 00 DCD is active low input
5850 * <11..10> 00 TxREQ pin is input (DSR)
5851 * <9..8> 00 RxREQ pin is input (RI)
5852 * <7..6> 00 TxD is output (Transmit Data)
5853 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5854 * <2..0> 100 RxC is Output (drive with BRG0)
5855 *
5856 * 0000 0000 0000 0100 = 0x0004
5857 */
5858
5859 usc_OutReg( info, IOCR, 0x0004 );
5860
5861 } /* end of usc_reset() */
5862
5863 /* usc_set_async_mode()
5864 *
5865 * Program adapter for asynchronous communications.
5866 *
5867 * Arguments: info pointer to device instance data
5868 * Return Value: None
5869 */
5870 static void usc_set_async_mode( struct mgsl_struct *info )
5871 {
5872 u16 RegValue;
5873
5874 /* disable interrupts while programming USC */
5875 usc_DisableMasterIrqBit( info );
5876
5877 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5878 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5879
5880 usc_loopback_frame( info );
5881
5882 /* Channel mode Register (CMR)
5883 *
5884 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5885 * <13..12> 00 00 = 16X Clock
5886 * <11..8> 0000 Transmitter mode = Asynchronous
5887 * <7..6> 00 reserved?
5888 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5889 * <3..0> 0000 Receiver mode = Asynchronous
5890 *
5891 * 0000 0000 0000 0000 = 0x0
5892 */
5893
5894 RegValue = 0;
5895 if ( info->params.stop_bits != 1 )
5896 RegValue |= BIT14;
5897 usc_OutReg( info, CMR, RegValue );
5898
5899
5900 /* Receiver mode Register (RMR)
5901 *
5902 * <15..13> 000 encoding = None
5903 * <12..08> 00000 reserved (Sync Only)
5904 * <7..6> 00 Even parity
5905 * <5> 0 parity disabled
5906 * <4..2> 000 Receive Char Length = 8 bits
5907 * <1..0> 00 Disable Receiver
5908 *
5909 * 0000 0000 0000 0000 = 0x0
5910 */
5911
5912 RegValue = 0;
5913
5914 if ( info->params.data_bits != 8 )
5915 RegValue |= BIT4 | BIT3 | BIT2;
5916
5917 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5918 RegValue |= BIT5;
5919 if ( info->params.parity != ASYNC_PARITY_ODD )
5920 RegValue |= BIT6;
5921 }
5922
5923 usc_OutReg( info, RMR, RegValue );
5924
5925
5926 /* Set IRQ trigger level */
5927
5928 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5929
5930
5931 /* Receive Interrupt Control Register (RICR)
5932 *
5933 * <15..8> ? RxFIFO IRQ Request Level
5934 *
5935 * Note: For async mode the receive FIFO level must be set
5936 * to 0 to avoid the situation where the FIFO contains fewer bytes
5937 * than the trigger level and no more data is expected.
5938 *
5939 * <7> 0 Exited Hunt IA (Interrupt Arm)
5940 * <6> 0 Idle Received IA
5941 * <5> 0 Break/Abort IA
5942 * <4> 0 Rx Bound IA
5943 * <3> 0 Queued status reflects oldest byte in FIFO
5944 * <2> 0 Abort/PE IA
5945 * <1> 0 Rx Overrun IA
5946 * <0> 0 Select TC0 value for readback
5947 *
5948 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
5949 */
5950
5951 usc_OutReg( info, RICR, 0x0000 );
5952
5953 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5954 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
5955
5956
5957 /* Transmit mode Register (TMR)
5958 *
5959 * <15..13> 000 encoding = None
5960 * <12..08> 00000 reserved (Sync Only)
5961 * <7..6> 00 Transmit parity Even
5962 * <5> 0 Transmit parity Disabled
5963 * <4..2> 000 Tx Char Length = 8 bits
5964 * <1..0> 00 Disable Transmitter
5965 *
5966 * 0000 0000 0000 0000 = 0x0
5967 */
5968
5969 RegValue = 0;
5970
5971 if ( info->params.data_bits != 8 )
5972 RegValue |= BIT4 | BIT3 | BIT2;
5973
5974 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5975 RegValue |= BIT5;
5976 if ( info->params.parity != ASYNC_PARITY_ODD )
5977 RegValue |= BIT6;
5978 }
5979
5980 usc_OutReg( info, TMR, RegValue );
5981
5982 usc_set_txidle( info );
5983
5984
5985 /* Set IRQ trigger level */
5986
5987 usc_TCmd( info, TCmd_SelectTicrIntLevel );
5988
5989
5990 /* Transmit Interrupt Control Register (TICR)
5991 *
5992 * <15..8> ? Transmit FIFO IRQ Level
5993 * <7> 0 Present IA (Interrupt Arm)
5994 * <6> 1 Idle Sent IA
5995 * <5> 0 Abort Sent IA
5996 * <4> 0 EOF/EOM Sent IA
5997 * <3> 0 CRC Sent IA
5998 * <2> 0 1 = Wait for SW Trigger to Start Frame
5999 * <1> 0 Tx Underrun IA
6000 * <0> 0 TC0 constant on read back
6001 *
6002 * 0000 0000 0100 0000 = 0x0040
6003 */
6004
6005 usc_OutReg( info, TICR, 0x1f40 );
6006
6007 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
6008 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
6009
6010 usc_enable_async_clock( info, info->params.data_rate );
6011
6012
6013 /* Channel Control/status Register (CCSR)
6014 *
6015 * <15> X RCC FIFO Overflow status (RO)
6016 * <14> X RCC FIFO Not Empty status (RO)
6017 * <13> 0 1 = Clear RCC FIFO (WO)
6018 * <12> X DPLL in Sync status (RO)
6019 * <11> X DPLL 2 Missed Clocks status (RO)
6020 * <10> X DPLL 1 Missed Clock status (RO)
6021 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6022 * <7> X SDLC Loop On status (RO)
6023 * <6> X SDLC Loop Send status (RO)
6024 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6025 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6026 * <1..0> 00 reserved
6027 *
6028 * 0000 0000 0010 0000 = 0x0020
6029 */
6030
6031 usc_OutReg( info, CCSR, 0x0020 );
6032
6033 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6034 RECEIVE_DATA + RECEIVE_STATUS );
6035
6036 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6037 RECEIVE_DATA + RECEIVE_STATUS );
6038
6039 usc_EnableMasterIrqBit( info );
6040
6041 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6042 /* Enable INTEN (Port 6, Bit12) */
6043 /* This connects the IRQ request signal to the ISA bus */
6044 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6045 }
6046
6047 if (info->params.loopback) {
6048 info->loopback_bits = 0x300;
6049 outw(0x0300, info->io_base + CCAR);
6050 }
6051
6052 } /* end of usc_set_async_mode() */
6053
6054 /* usc_loopback_frame()
6055 *
6056 * Loop back a small (2 byte) dummy SDLC frame.
6057 * Interrupts and DMA are NOT used. The purpose of this is to
6058 * clear any 'stale' status info left over from running in async mode.
6059 *
6060 * The 16C32 shows the strange behaviour of marking the 1st
6061 * received SDLC frame with a CRC error even when there is no
6062 * CRC error. To get around this a small dummy from of 2 bytes
6063 * is looped back when switching from async to sync mode.
6064 *
6065 * Arguments: info pointer to device instance data
6066 * Return Value: None
6067 */
6068 static void usc_loopback_frame( struct mgsl_struct *info )
6069 {
6070 int i;
6071 unsigned long oldmode = info->params.mode;
6072
6073 info->params.mode = MGSL_MODE_HDLC;
6074
6075 usc_DisableMasterIrqBit( info );
6076
6077 usc_set_sdlc_mode( info );
6078 usc_enable_loopback( info, 1 );
6079
6080 /* Write 16-bit Time Constant for BRG0 */
6081 usc_OutReg( info, TC0R, 0 );
6082
6083 /* Channel Control Register (CCR)
6084 *
6085 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6086 * <13> 0 Trigger Tx on SW Command Disabled
6087 * <12> 0 Flag Preamble Disabled
6088 * <11..10> 00 Preamble Length = 8-Bits
6089 * <9..8> 01 Preamble Pattern = flags
6090 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6091 * <5> 0 Trigger Rx on SW Command Disabled
6092 * <4..0> 0 reserved
6093 *
6094 * 0000 0001 0000 0000 = 0x0100
6095 */
6096
6097 usc_OutReg( info, CCR, 0x0100 );
6098
6099 /* SETUP RECEIVER */
6100 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6101 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6102
6103 /* SETUP TRANSMITTER */
6104 /* Program the Transmit Character Length Register (TCLR) */
6105 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6106 usc_OutReg( info, TCLR, 2 );
6107 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6108
6109 /* unlatch Tx status bits, and start transmit channel. */
6110 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6111 outw(0,info->io_base + DATAREG);
6112
6113 /* ENABLE TRANSMITTER */
6114 usc_TCmd( info, TCmd_SendFrame );
6115 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6116
6117 /* WAIT FOR RECEIVE COMPLETE */
6118 for (i=0 ; i<1000 ; i++)
6119 if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1))
6120 break;
6121
6122 /* clear Internal Data loopback mode */
6123 usc_enable_loopback(info, 0);
6124
6125 usc_EnableMasterIrqBit(info);
6126
6127 info->params.mode = oldmode;
6128
6129 } /* end of usc_loopback_frame() */
6130
6131 /* usc_set_sync_mode() Programs the USC for SDLC communications.
6132 *
6133 * Arguments: info pointer to adapter info structure
6134 * Return Value: None
6135 */
6136 static void usc_set_sync_mode( struct mgsl_struct *info )
6137 {
6138 usc_loopback_frame( info );
6139 usc_set_sdlc_mode( info );
6140
6141 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6142 /* Enable INTEN (Port 6, Bit12) */
6143 /* This connects the IRQ request signal to the ISA bus */
6144 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6145 }
6146
6147 usc_enable_aux_clock(info, info->params.clock_speed);
6148
6149 if (info->params.loopback)
6150 usc_enable_loopback(info,1);
6151
6152 } /* end of mgsl_set_sync_mode() */
6153
6154 /* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6155 *
6156 * Arguments: info pointer to device instance data
6157 * Return Value: None
6158 */
6159 static void usc_set_txidle( struct mgsl_struct *info )
6160 {
6161 u16 usc_idle_mode = IDLEMODE_FLAGS;
6162
6163 /* Map API idle mode to USC register bits */
6164
6165 switch( info->idle_mode ){
6166 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6167 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6168 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6169 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6170 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6171 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6172 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6173 }
6174
6175 info->usc_idle_mode = usc_idle_mode;
6176 //usc_OutReg(info, TCSR, usc_idle_mode);
6177 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6178 info->tcsr_value += usc_idle_mode;
6179 usc_OutReg(info, TCSR, info->tcsr_value);
6180
6181 /*
6182 * if SyncLink WAN adapter is running in external sync mode, the
6183 * transmitter has been set to Monosync in order to try to mimic
6184 * a true raw outbound bit stream. Monosync still sends an open/close
6185 * sync char at the start/end of a frame. Try to match those sync
6186 * patterns to the idle mode set here
6187 */
6188 if ( info->params.mode == MGSL_MODE_RAW ) {
6189 unsigned char syncpat = 0;
6190 switch( info->idle_mode ) {
6191 case HDLC_TXIDLE_FLAGS:
6192 syncpat = 0x7e;
6193 break;
6194 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6195 syncpat = 0x55;
6196 break;
6197 case HDLC_TXIDLE_ZEROS:
6198 case HDLC_TXIDLE_SPACE:
6199 syncpat = 0x00;
6200 break;
6201 case HDLC_TXIDLE_ONES:
6202 case HDLC_TXIDLE_MARK:
6203 syncpat = 0xff;
6204 break;
6205 case HDLC_TXIDLE_ALT_MARK_SPACE:
6206 syncpat = 0xaa;
6207 break;
6208 }
6209
6210 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6211 }
6212
6213 } /* end of usc_set_txidle() */
6214
6215 /* usc_get_serial_signals()
6216 *
6217 * Query the adapter for the state of the V24 status (input) signals.
6218 *
6219 * Arguments: info pointer to device instance data
6220 * Return Value: None
6221 */
6222 static void usc_get_serial_signals( struct mgsl_struct *info )
6223 {
6224 u16 status;
6225
6226 /* clear all serial signals except RTS and DTR */
6227 info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
6228
6229 /* Read the Misc Interrupt status Register (MISR) to get */
6230 /* the V24 status signals. */
6231
6232 status = usc_InReg( info, MISR );
6233
6234 /* set serial signal bits to reflect MISR */
6235
6236 if ( status & MISCSTATUS_CTS )
6237 info->serial_signals |= SerialSignal_CTS;
6238
6239 if ( status & MISCSTATUS_DCD )
6240 info->serial_signals |= SerialSignal_DCD;
6241
6242 if ( status & MISCSTATUS_RI )
6243 info->serial_signals |= SerialSignal_RI;
6244
6245 if ( status & MISCSTATUS_DSR )
6246 info->serial_signals |= SerialSignal_DSR;
6247
6248 } /* end of usc_get_serial_signals() */
6249
6250 /* usc_set_serial_signals()
6251 *
6252 * Set the state of RTS and DTR based on contents of
6253 * serial_signals member of device extension.
6254 *
6255 * Arguments: info pointer to device instance data
6256 * Return Value: None
6257 */
6258 static void usc_set_serial_signals( struct mgsl_struct *info )
6259 {
6260 u16 Control;
6261 unsigned char V24Out = info->serial_signals;
6262
6263 /* get the current value of the Port Control Register (PCR) */
6264
6265 Control = usc_InReg( info, PCR );
6266
6267 if ( V24Out & SerialSignal_RTS )
6268 Control &= ~(BIT6);
6269 else
6270 Control |= BIT6;
6271
6272 if ( V24Out & SerialSignal_DTR )
6273 Control &= ~(BIT4);
6274 else
6275 Control |= BIT4;
6276
6277 usc_OutReg( info, PCR, Control );
6278
6279 } /* end of usc_set_serial_signals() */
6280
6281 /* usc_enable_async_clock()
6282 *
6283 * Enable the async clock at the specified frequency.
6284 *
6285 * Arguments: info pointer to device instance data
6286 * data_rate data rate of clock in bps
6287 * 0 disables the AUX clock.
6288 * Return Value: None
6289 */
6290 static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6291 {
6292 if ( data_rate ) {
6293 /*
6294 * Clock mode Control Register (CMCR)
6295 *
6296 * <15..14> 00 counter 1 Disabled
6297 * <13..12> 00 counter 0 Disabled
6298 * <11..10> 11 BRG1 Input is TxC Pin
6299 * <9..8> 11 BRG0 Input is TxC Pin
6300 * <7..6> 01 DPLL Input is BRG1 Output
6301 * <5..3> 100 TxCLK comes from BRG0
6302 * <2..0> 100 RxCLK comes from BRG0
6303 *
6304 * 0000 1111 0110 0100 = 0x0f64
6305 */
6306
6307 usc_OutReg( info, CMCR, 0x0f64 );
6308
6309
6310 /*
6311 * Write 16-bit Time Constant for BRG0
6312 * Time Constant = (ClkSpeed / data_rate) - 1
6313 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6314 */
6315
6316 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6317 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6318 else
6319 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6320
6321
6322 /*
6323 * Hardware Configuration Register (HCR)
6324 * Clear Bit 1, BRG0 mode = Continuous
6325 * Set Bit 0 to enable BRG0.
6326 */
6327
6328 usc_OutReg( info, HCR,
6329 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6330
6331
6332 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6333
6334 usc_OutReg( info, IOCR,
6335 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6336 } else {
6337 /* data rate == 0 so turn off BRG0 */
6338 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6339 }
6340
6341 } /* end of usc_enable_async_clock() */
6342
6343 /*
6344 * Buffer Structures:
6345 *
6346 * Normal memory access uses virtual addresses that can make discontiguous
6347 * physical memory pages appear to be contiguous in the virtual address
6348 * space (the processors memory mapping handles the conversions).
6349 *
6350 * DMA transfers require physically contiguous memory. This is because
6351 * the DMA system controller and DMA bus masters deal with memory using
6352 * only physical addresses.
6353 *
6354 * This causes a problem under Windows NT when large DMA buffers are
6355 * needed. Fragmentation of the nonpaged pool prevents allocations of
6356 * physically contiguous buffers larger than the PAGE_SIZE.
6357 *
6358 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6359 * allows DMA transfers to physically discontiguous buffers. Information
6360 * about each data transfer buffer is contained in a memory structure
6361 * called a 'buffer entry'. A list of buffer entries is maintained
6362 * to track and control the use of the data transfer buffers.
6363 *
6364 * To support this strategy we will allocate sufficient PAGE_SIZE
6365 * contiguous memory buffers to allow for the total required buffer
6366 * space.
6367 *
6368 * The 16C32 accesses the list of buffer entries using Bus Master
6369 * DMA. Control information is read from the buffer entries by the
6370 * 16C32 to control data transfers. status information is written to
6371 * the buffer entries by the 16C32 to indicate the status of completed
6372 * transfers.
6373 *
6374 * The CPU writes control information to the buffer entries to control
6375 * the 16C32 and reads status information from the buffer entries to
6376 * determine information about received and transmitted frames.
6377 *
6378 * Because the CPU and 16C32 (adapter) both need simultaneous access
6379 * to the buffer entries, the buffer entry memory is allocated with
6380 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6381 * entry list to PAGE_SIZE.
6382 *
6383 * The actual data buffers on the other hand will only be accessed
6384 * by the CPU or the adapter but not by both simultaneously. This allows
6385 * Scatter/Gather packet based DMA procedures for using physically
6386 * discontiguous pages.
6387 */
6388
6389 /*
6390 * mgsl_reset_tx_dma_buffers()
6391 *
6392 * Set the count for all transmit buffers to 0 to indicate the
6393 * buffer is available for use and set the current buffer to the
6394 * first buffer. This effectively makes all buffers free and
6395 * discards any data in buffers.
6396 *
6397 * Arguments: info pointer to device instance data
6398 * Return Value: None
6399 */
6400 static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6401 {
6402 unsigned int i;
6403
6404 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6405 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6406 }
6407
6408 info->current_tx_buffer = 0;
6409 info->start_tx_dma_buffer = 0;
6410 info->tx_dma_buffers_used = 0;
6411
6412 info->get_tx_holding_index = 0;
6413 info->put_tx_holding_index = 0;
6414 info->tx_holding_count = 0;
6415
6416 } /* end of mgsl_reset_tx_dma_buffers() */
6417
6418 /*
6419 * num_free_tx_dma_buffers()
6420 *
6421 * returns the number of free tx dma buffers available
6422 *
6423 * Arguments: info pointer to device instance data
6424 * Return Value: number of free tx dma buffers
6425 */
6426 static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6427 {
6428 return info->tx_buffer_count - info->tx_dma_buffers_used;
6429 }
6430
6431 /*
6432 * mgsl_reset_rx_dma_buffers()
6433 *
6434 * Set the count for all receive buffers to DMABUFFERSIZE
6435 * and set the current buffer to the first buffer. This effectively
6436 * makes all buffers free and discards any data in buffers.
6437 *
6438 * Arguments: info pointer to device instance data
6439 * Return Value: None
6440 */
6441 static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6442 {
6443 unsigned int i;
6444
6445 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6446 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6447 // info->rx_buffer_list[i].count = DMABUFFERSIZE;
6448 // info->rx_buffer_list[i].status = 0;
6449 }
6450
6451 info->current_rx_buffer = 0;
6452
6453 } /* end of mgsl_reset_rx_dma_buffers() */
6454
6455 /*
6456 * mgsl_free_rx_frame_buffers()
6457 *
6458 * Free the receive buffers used by a received SDLC
6459 * frame such that the buffers can be reused.
6460 *
6461 * Arguments:
6462 *
6463 * info pointer to device instance data
6464 * StartIndex index of 1st receive buffer of frame
6465 * EndIndex index of last receive buffer of frame
6466 *
6467 * Return Value: None
6468 */
6469 static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6470 {
6471 bool Done = false;
6472 DMABUFFERENTRY *pBufEntry;
6473 unsigned int Index;
6474
6475 /* Starting with 1st buffer entry of the frame clear the status */
6476 /* field and set the count field to DMA Buffer Size. */
6477
6478 Index = StartIndex;
6479
6480 while( !Done ) {
6481 pBufEntry = &(info->rx_buffer_list[Index]);
6482
6483 if ( Index == EndIndex ) {
6484 /* This is the last buffer of the frame! */
6485 Done = true;
6486 }
6487
6488 /* reset current buffer for reuse */
6489 // pBufEntry->status = 0;
6490 // pBufEntry->count = DMABUFFERSIZE;
6491 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6492
6493 /* advance to next buffer entry in linked list */
6494 Index++;
6495 if ( Index == info->rx_buffer_count )
6496 Index = 0;
6497 }
6498
6499 /* set current buffer to next buffer after last buffer of frame */
6500 info->current_rx_buffer = Index;
6501
6502 } /* end of free_rx_frame_buffers() */
6503
6504 /* mgsl_get_rx_frame()
6505 *
6506 * This function attempts to return a received SDLC frame from the
6507 * receive DMA buffers. Only frames received without errors are returned.
6508 *
6509 * Arguments: info pointer to device extension
6510 * Return Value: true if frame returned, otherwise false
6511 */
6512 static bool mgsl_get_rx_frame(struct mgsl_struct *info)
6513 {
6514 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6515 unsigned short status;
6516 DMABUFFERENTRY *pBufEntry;
6517 unsigned int framesize = 0;
6518 bool ReturnCode = false;
6519 unsigned long flags;
6520 struct tty_struct *tty = info->port.tty;
6521 bool return_frame = false;
6522
6523 /*
6524 * current_rx_buffer points to the 1st buffer of the next available
6525 * receive frame. To find the last buffer of the frame look for
6526 * a non-zero status field in the buffer entries. (The status
6527 * field is set by the 16C32 after completing a receive frame.
6528 */
6529
6530 StartIndex = EndIndex = info->current_rx_buffer;
6531
6532 while( !info->rx_buffer_list[EndIndex].status ) {
6533 /*
6534 * If the count field of the buffer entry is non-zero then
6535 * this buffer has not been used. (The 16C32 clears the count
6536 * field when it starts using the buffer.) If an unused buffer
6537 * is encountered then there are no frames available.
6538 */
6539
6540 if ( info->rx_buffer_list[EndIndex].count )
6541 goto Cleanup;
6542
6543 /* advance to next buffer entry in linked list */
6544 EndIndex++;
6545 if ( EndIndex == info->rx_buffer_count )
6546 EndIndex = 0;
6547
6548 /* if entire list searched then no frame available */
6549 if ( EndIndex == StartIndex ) {
6550 /* If this occurs then something bad happened,
6551 * all buffers have been 'used' but none mark
6552 * the end of a frame. Reset buffers and receiver.
6553 */
6554
6555 if ( info->rx_enabled ){
6556 spin_lock_irqsave(&info->irq_spinlock,flags);
6557 usc_start_receiver(info);
6558 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6559 }
6560 goto Cleanup;
6561 }
6562 }
6563
6564
6565 /* check status of receive frame */
6566
6567 status = info->rx_buffer_list[EndIndex].status;
6568
6569 if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
6570 RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
6571 if ( status & RXSTATUS_SHORT_FRAME )
6572 info->icount.rxshort++;
6573 else if ( status & RXSTATUS_ABORT )
6574 info->icount.rxabort++;
6575 else if ( status & RXSTATUS_OVERRUN )
6576 info->icount.rxover++;
6577 else {
6578 info->icount.rxcrc++;
6579 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
6580 return_frame = true;
6581 }
6582 framesize = 0;
6583 #if SYNCLINK_GENERIC_HDLC
6584 {
6585 info->netdev->stats.rx_errors++;
6586 info->netdev->stats.rx_frame_errors++;
6587 }
6588 #endif
6589 } else
6590 return_frame = true;
6591
6592 if ( return_frame ) {
6593 /* receive frame has no errors, get frame size.
6594 * The frame size is the starting value of the RCC (which was
6595 * set to 0xffff) minus the ending value of the RCC (decremented
6596 * once for each receive character) minus 2 for the 16-bit CRC.
6597 */
6598
6599 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6600
6601 /* adjust frame size for CRC if any */
6602 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6603 framesize -= 2;
6604 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6605 framesize -= 4;
6606 }
6607
6608 if ( debug_level >= DEBUG_LEVEL_BH )
6609 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6610 __FILE__,__LINE__,info->device_name,status,framesize);
6611
6612 if ( debug_level >= DEBUG_LEVEL_DATA )
6613 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6614 min_t(int, framesize, DMABUFFERSIZE),0);
6615
6616 if (framesize) {
6617 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6618 ((framesize+1) > info->max_frame_size) ) ||
6619 (framesize > info->max_frame_size) )
6620 info->icount.rxlong++;
6621 else {
6622 /* copy dma buffer(s) to contiguous intermediate buffer */
6623 int copy_count = framesize;
6624 int index = StartIndex;
6625 unsigned char *ptmp = info->intermediate_rxbuffer;
6626
6627 if ( !(status & RXSTATUS_CRC_ERROR))
6628 info->icount.rxok++;
6629
6630 while(copy_count) {
6631 int partial_count;
6632 if ( copy_count > DMABUFFERSIZE )
6633 partial_count = DMABUFFERSIZE;
6634 else
6635 partial_count = copy_count;
6636
6637 pBufEntry = &(info->rx_buffer_list[index]);
6638 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6639 ptmp += partial_count;
6640 copy_count -= partial_count;
6641
6642 if ( ++index == info->rx_buffer_count )
6643 index = 0;
6644 }
6645
6646 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6647 ++framesize;
6648 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6649 RX_CRC_ERROR :
6650 RX_OK);
6651
6652 if ( debug_level >= DEBUG_LEVEL_DATA )
6653 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6654 __FILE__,__LINE__,info->device_name,
6655 *ptmp);
6656 }
6657
6658 #if SYNCLINK_GENERIC_HDLC
6659 if (info->netcount)
6660 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6661 else
6662 #endif
6663 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6664 }
6665 }
6666 /* Free the buffers used by this frame. */
6667 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6668
6669 ReturnCode = true;
6670
6671 Cleanup:
6672
6673 if ( info->rx_enabled && info->rx_overflow ) {
6674 /* The receiver needs to restarted because of
6675 * a receive overflow (buffer or FIFO). If the
6676 * receive buffers are now empty, then restart receiver.
6677 */
6678
6679 if ( !info->rx_buffer_list[EndIndex].status &&
6680 info->rx_buffer_list[EndIndex].count ) {
6681 spin_lock_irqsave(&info->irq_spinlock,flags);
6682 usc_start_receiver(info);
6683 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6684 }
6685 }
6686
6687 return ReturnCode;
6688
6689 } /* end of mgsl_get_rx_frame() */
6690
6691 /* mgsl_get_raw_rx_frame()
6692 *
6693 * This function attempts to return a received frame from the
6694 * receive DMA buffers when running in external loop mode. In this mode,
6695 * we will return at most one DMABUFFERSIZE frame to the application.
6696 * The USC receiver is triggering off of DCD going active to start a new
6697 * frame, and DCD going inactive to terminate the frame (similar to
6698 * processing a closing flag character).
6699 *
6700 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6701 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6702 * status field and the RCC field will indicate the length of the
6703 * entire received frame. We take this RCC field and get the modulus
6704 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6705 * last Rx DMA buffer and return that last portion of the frame.
6706 *
6707 * Arguments: info pointer to device extension
6708 * Return Value: true if frame returned, otherwise false
6709 */
6710 static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
6711 {
6712 unsigned int CurrentIndex, NextIndex;
6713 unsigned short status;
6714 DMABUFFERENTRY *pBufEntry;
6715 unsigned int framesize = 0;
6716 bool ReturnCode = false;
6717 unsigned long flags;
6718 struct tty_struct *tty = info->port.tty;
6719
6720 /*
6721 * current_rx_buffer points to the 1st buffer of the next available
6722 * receive frame. The status field is set by the 16C32 after
6723 * completing a receive frame. If the status field of this buffer
6724 * is zero, either the USC is still filling this buffer or this
6725 * is one of a series of buffers making up a received frame.
6726 *
6727 * If the count field of this buffer is zero, the USC is either
6728 * using this buffer or has used this buffer. Look at the count
6729 * field of the next buffer. If that next buffer's count is
6730 * non-zero, the USC is still actively using the current buffer.
6731 * Otherwise, if the next buffer's count field is zero, the
6732 * current buffer is complete and the USC is using the next
6733 * buffer.
6734 */
6735 CurrentIndex = NextIndex = info->current_rx_buffer;
6736 ++NextIndex;
6737 if ( NextIndex == info->rx_buffer_count )
6738 NextIndex = 0;
6739
6740 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6741 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6742 info->rx_buffer_list[NextIndex].count == 0)) {
6743 /*
6744 * Either the status field of this dma buffer is non-zero
6745 * (indicating the last buffer of a receive frame) or the next
6746 * buffer is marked as in use -- implying this buffer is complete
6747 * and an intermediate buffer for this received frame.
6748 */
6749
6750 status = info->rx_buffer_list[CurrentIndex].status;
6751
6752 if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
6753 RXSTATUS_CRC_ERROR | RXSTATUS_ABORT) ) {
6754 if ( status & RXSTATUS_SHORT_FRAME )
6755 info->icount.rxshort++;
6756 else if ( status & RXSTATUS_ABORT )
6757 info->icount.rxabort++;
6758 else if ( status & RXSTATUS_OVERRUN )
6759 info->icount.rxover++;
6760 else
6761 info->icount.rxcrc++;
6762 framesize = 0;
6763 } else {
6764 /*
6765 * A receive frame is available, get frame size and status.
6766 *
6767 * The frame size is the starting value of the RCC (which was
6768 * set to 0xffff) minus the ending value of the RCC (decremented
6769 * once for each receive character) minus 2 or 4 for the 16-bit
6770 * or 32-bit CRC.
6771 *
6772 * If the status field is zero, this is an intermediate buffer.
6773 * It's size is 4K.
6774 *
6775 * If the DMA Buffer Entry's Status field is non-zero, the
6776 * receive operation completed normally (ie: DCD dropped). The
6777 * RCC field is valid and holds the received frame size.
6778 * It is possible that the RCC field will be zero on a DMA buffer
6779 * entry with a non-zero status. This can occur if the total
6780 * frame size (number of bytes between the time DCD goes active
6781 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6782 * case the 16C32 has underrun on the RCC count and appears to
6783 * stop updating this counter to let us know the actual received
6784 * frame size. If this happens (non-zero status and zero RCC),
6785 * simply return the entire RxDMA Buffer
6786 */
6787 if ( status ) {
6788 /*
6789 * In the event that the final RxDMA Buffer is
6790 * terminated with a non-zero status and the RCC
6791 * field is zero, we interpret this as the RCC
6792 * having underflowed (received frame > 65535 bytes).
6793 *
6794 * Signal the event to the user by passing back
6795 * a status of RxStatus_CrcError returning the full
6796 * buffer and let the app figure out what data is
6797 * actually valid
6798 */
6799 if ( info->rx_buffer_list[CurrentIndex].rcc )
6800 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6801 else
6802 framesize = DMABUFFERSIZE;
6803 }
6804 else
6805 framesize = DMABUFFERSIZE;
6806 }
6807
6808 if ( framesize > DMABUFFERSIZE ) {
6809 /*
6810 * if running in raw sync mode, ISR handler for
6811 * End Of Buffer events terminates all buffers at 4K.
6812 * If this frame size is said to be >4K, get the
6813 * actual number of bytes of the frame in this buffer.
6814 */
6815 framesize = framesize % DMABUFFERSIZE;
6816 }
6817
6818
6819 if ( debug_level >= DEBUG_LEVEL_BH )
6820 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6821 __FILE__,__LINE__,info->device_name,status,framesize);
6822
6823 if ( debug_level >= DEBUG_LEVEL_DATA )
6824 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6825 min_t(int, framesize, DMABUFFERSIZE),0);
6826
6827 if (framesize) {
6828 /* copy dma buffer(s) to contiguous intermediate buffer */
6829 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6830
6831 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6832 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6833 info->icount.rxok++;
6834
6835 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6836 }
6837
6838 /* Free the buffers used by this frame. */
6839 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6840
6841 ReturnCode = true;
6842 }
6843
6844
6845 if ( info->rx_enabled && info->rx_overflow ) {
6846 /* The receiver needs to restarted because of
6847 * a receive overflow (buffer or FIFO). If the
6848 * receive buffers are now empty, then restart receiver.
6849 */
6850
6851 if ( !info->rx_buffer_list[CurrentIndex].status &&
6852 info->rx_buffer_list[CurrentIndex].count ) {
6853 spin_lock_irqsave(&info->irq_spinlock,flags);
6854 usc_start_receiver(info);
6855 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6856 }
6857 }
6858
6859 return ReturnCode;
6860
6861 } /* end of mgsl_get_raw_rx_frame() */
6862
6863 /* mgsl_load_tx_dma_buffer()
6864 *
6865 * Load the transmit DMA buffer with the specified data.
6866 *
6867 * Arguments:
6868 *
6869 * info pointer to device extension
6870 * Buffer pointer to buffer containing frame to load
6871 * BufferSize size in bytes of frame in Buffer
6872 *
6873 * Return Value: None
6874 */
6875 static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6876 const char *Buffer, unsigned int BufferSize)
6877 {
6878 unsigned short Copycount;
6879 unsigned int i = 0;
6880 DMABUFFERENTRY *pBufEntry;
6881
6882 if ( debug_level >= DEBUG_LEVEL_DATA )
6883 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6884
6885 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6886 /* set CMR:13 to start transmit when
6887 * next GoAhead (abort) is received
6888 */
6889 info->cmr_value |= BIT13;
6890 }
6891
6892 /* begin loading the frame in the next available tx dma
6893 * buffer, remember it's starting location for setting
6894 * up tx dma operation
6895 */
6896 i = info->current_tx_buffer;
6897 info->start_tx_dma_buffer = i;
6898
6899 /* Setup the status and RCC (Frame Size) fields of the 1st */
6900 /* buffer entry in the transmit DMA buffer list. */
6901
6902 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6903 info->tx_buffer_list[i].rcc = BufferSize;
6904 info->tx_buffer_list[i].count = BufferSize;
6905
6906 /* Copy frame data from 1st source buffer to the DMA buffers. */
6907 /* The frame data may span multiple DMA buffers. */
6908
6909 while( BufferSize ){
6910 /* Get a pointer to next DMA buffer entry. */
6911 pBufEntry = &info->tx_buffer_list[i++];
6912
6913 if ( i == info->tx_buffer_count )
6914 i=0;
6915
6916 /* Calculate the number of bytes that can be copied from */
6917 /* the source buffer to this DMA buffer. */
6918 if ( BufferSize > DMABUFFERSIZE )
6919 Copycount = DMABUFFERSIZE;
6920 else
6921 Copycount = BufferSize;
6922
6923 /* Actually copy data from source buffer to DMA buffer. */
6924 /* Also set the data count for this individual DMA buffer. */
6925 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6926 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6927 else
6928 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6929
6930 pBufEntry->count = Copycount;
6931
6932 /* Advance source pointer and reduce remaining data count. */
6933 Buffer += Copycount;
6934 BufferSize -= Copycount;
6935
6936 ++info->tx_dma_buffers_used;
6937 }
6938
6939 /* remember next available tx dma buffer */
6940 info->current_tx_buffer = i;
6941
6942 } /* end of mgsl_load_tx_dma_buffer() */
6943
6944 /*
6945 * mgsl_register_test()
6946 *
6947 * Performs a register test of the 16C32.
6948 *
6949 * Arguments: info pointer to device instance data
6950 * Return Value: true if test passed, otherwise false
6951 */
6952 static bool mgsl_register_test( struct mgsl_struct *info )
6953 {
6954 static unsigned short BitPatterns[] =
6955 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
6956 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
6957 unsigned int i;
6958 bool rc = true;
6959 unsigned long flags;
6960
6961 spin_lock_irqsave(&info->irq_spinlock,flags);
6962 usc_reset(info);
6963
6964 /* Verify the reset state of some registers. */
6965
6966 if ( (usc_InReg( info, SICR ) != 0) ||
6967 (usc_InReg( info, IVR ) != 0) ||
6968 (usc_InDmaReg( info, DIVR ) != 0) ){
6969 rc = false;
6970 }
6971
6972 if ( rc ){
6973 /* Write bit patterns to various registers but do it out of */
6974 /* sync, then read back and verify values. */
6975
6976 for ( i = 0 ; i < Patterncount ; i++ ) {
6977 usc_OutReg( info, TC0R, BitPatterns[i] );
6978 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
6979 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
6980 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
6981 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
6982 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
6983
6984 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
6985 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
6986 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
6987 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
6988 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
6989 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
6990 rc = false;
6991 break;
6992 }
6993 }
6994 }
6995
6996 usc_reset(info);
6997 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6998
6999 return rc;
7000
7001 } /* end of mgsl_register_test() */
7002
7003 /* mgsl_irq_test() Perform interrupt test of the 16C32.
7004 *
7005 * Arguments: info pointer to device instance data
7006 * Return Value: true if test passed, otherwise false
7007 */
7008 static bool mgsl_irq_test( struct mgsl_struct *info )
7009 {
7010 unsigned long EndTime;
7011 unsigned long flags;
7012
7013 spin_lock_irqsave(&info->irq_spinlock,flags);
7014 usc_reset(info);
7015
7016 /*
7017 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
7018 * The ISR sets irq_occurred to true.
7019 */
7020
7021 info->irq_occurred = false;
7022
7023 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7024 /* Enable INTEN (Port 6, Bit12) */
7025 /* This connects the IRQ request signal to the ISA bus */
7026 /* on the ISA adapter. This has no effect for the PCI adapter */
7027 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7028
7029 usc_EnableMasterIrqBit(info);
7030 usc_EnableInterrupts(info, IO_PIN);
7031 usc_ClearIrqPendingBits(info, IO_PIN);
7032
7033 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7034 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7035
7036 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7037
7038 EndTime=100;
7039 while( EndTime-- && !info->irq_occurred ) {
7040 msleep_interruptible(10);
7041 }
7042
7043 spin_lock_irqsave(&info->irq_spinlock,flags);
7044 usc_reset(info);
7045 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7046
7047 return info->irq_occurred;
7048
7049 } /* end of mgsl_irq_test() */
7050
7051 /* mgsl_dma_test()
7052 *
7053 * Perform a DMA test of the 16C32. A small frame is
7054 * transmitted via DMA from a transmit buffer to a receive buffer
7055 * using single buffer DMA mode.
7056 *
7057 * Arguments: info pointer to device instance data
7058 * Return Value: true if test passed, otherwise false
7059 */
7060 static bool mgsl_dma_test( struct mgsl_struct *info )
7061 {
7062 unsigned short FifoLevel;
7063 unsigned long phys_addr;
7064 unsigned int FrameSize;
7065 unsigned int i;
7066 char *TmpPtr;
7067 bool rc = true;
7068 unsigned short status=0;
7069 unsigned long EndTime;
7070 unsigned long flags;
7071 MGSL_PARAMS tmp_params;
7072
7073 /* save current port options */
7074 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7075 /* load default port options */
7076 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7077
7078 #define TESTFRAMESIZE 40
7079
7080 spin_lock_irqsave(&info->irq_spinlock,flags);
7081
7082 /* setup 16C32 for SDLC DMA transfer mode */
7083
7084 usc_reset(info);
7085 usc_set_sdlc_mode(info);
7086 usc_enable_loopback(info,1);
7087
7088 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7089 * field of the buffer entry after fetching buffer address. This
7090 * way we can detect a DMA failure for a DMA read (which should be
7091 * non-destructive to system memory) before we try and write to
7092 * memory (where a failure could corrupt system memory).
7093 */
7094
7095 /* Receive DMA mode Register (RDMR)
7096 *
7097 * <15..14> 11 DMA mode = Linked List Buffer mode
7098 * <13> 1 RSBinA/L = store Rx status Block in List entry
7099 * <12> 0 1 = Clear count of List Entry after fetching
7100 * <11..10> 00 Address mode = Increment
7101 * <9> 1 Terminate Buffer on RxBound
7102 * <8> 0 Bus Width = 16bits
7103 * <7..0> ? status Bits (write as 0s)
7104 *
7105 * 1110 0010 0000 0000 = 0xe200
7106 */
7107
7108 usc_OutDmaReg( info, RDMR, 0xe200 );
7109
7110 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7111
7112
7113 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7114
7115 FrameSize = TESTFRAMESIZE;
7116
7117 /* setup 1st transmit buffer entry: */
7118 /* with frame size and transmit control word */
7119
7120 info->tx_buffer_list[0].count = FrameSize;
7121 info->tx_buffer_list[0].rcc = FrameSize;
7122 info->tx_buffer_list[0].status = 0x4000;
7123
7124 /* build a transmit frame in 1st transmit DMA buffer */
7125
7126 TmpPtr = info->tx_buffer_list[0].virt_addr;
7127 for (i = 0; i < FrameSize; i++ )
7128 *TmpPtr++ = i;
7129
7130 /* setup 1st receive buffer entry: */
7131 /* clear status, set max receive buffer size */
7132
7133 info->rx_buffer_list[0].status = 0;
7134 info->rx_buffer_list[0].count = FrameSize + 4;
7135
7136 /* zero out the 1st receive buffer */
7137
7138 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7139
7140 /* Set count field of next buffer entries to prevent */
7141 /* 16C32 from using buffers after the 1st one. */
7142
7143 info->tx_buffer_list[1].count = 0;
7144 info->rx_buffer_list[1].count = 0;
7145
7146
7147 /***************************/
7148 /* Program 16C32 receiver. */
7149 /***************************/
7150
7151 spin_lock_irqsave(&info->irq_spinlock,flags);
7152
7153 /* setup DMA transfers */
7154 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7155
7156 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7157 phys_addr = info->rx_buffer_list[0].phys_entry;
7158 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7159 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7160
7161 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7162 usc_InDmaReg( info, RDMR );
7163 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7164
7165 /* Enable Receiver (RMR <1..0> = 10) */
7166 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7167
7168 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7169
7170
7171 /*************************************************************/
7172 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7173 /*************************************************************/
7174
7175 /* Wait 100ms for interrupt. */
7176 EndTime = jiffies + msecs_to_jiffies(100);
7177
7178 for(;;) {
7179 if (time_after(jiffies, EndTime)) {
7180 rc = false;
7181 break;
7182 }
7183
7184 spin_lock_irqsave(&info->irq_spinlock,flags);
7185 status = usc_InDmaReg( info, RDMR );
7186 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7187
7188 if ( !(status & BIT4) && (status & BIT5) ) {
7189 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7190 /* BUSY (BIT 5) is active (channel still active). */
7191 /* This means the buffer entry read has completed. */
7192 break;
7193 }
7194 }
7195
7196
7197 /******************************/
7198 /* Program 16C32 transmitter. */
7199 /******************************/
7200
7201 spin_lock_irqsave(&info->irq_spinlock,flags);
7202
7203 /* Program the Transmit Character Length Register (TCLR) */
7204 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7205
7206 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7207 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7208
7209 /* Program the address of the 1st DMA Buffer Entry in linked list */
7210
7211 phys_addr = info->tx_buffer_list[0].phys_entry;
7212 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7213 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7214
7215 /* unlatch Tx status bits, and start transmit channel. */
7216
7217 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7218 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7219
7220 /* wait for DMA controller to fill transmit FIFO */
7221
7222 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7223
7224 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7225
7226
7227 /**********************************/
7228 /* WAIT FOR TRANSMIT FIFO TO FILL */
7229 /**********************************/
7230
7231 /* Wait 100ms */
7232 EndTime = jiffies + msecs_to_jiffies(100);
7233
7234 for(;;) {
7235 if (time_after(jiffies, EndTime)) {
7236 rc = false;
7237 break;
7238 }
7239
7240 spin_lock_irqsave(&info->irq_spinlock,flags);
7241 FifoLevel = usc_InReg(info, TICR) >> 8;
7242 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7243
7244 if ( FifoLevel < 16 )
7245 break;
7246 else
7247 if ( FrameSize < 32 ) {
7248 /* This frame is smaller than the entire transmit FIFO */
7249 /* so wait for the entire frame to be loaded. */
7250 if ( FifoLevel <= (32 - FrameSize) )
7251 break;
7252 }
7253 }
7254
7255
7256 if ( rc )
7257 {
7258 /* Enable 16C32 transmitter. */
7259
7260 spin_lock_irqsave(&info->irq_spinlock,flags);
7261
7262 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7263 usc_TCmd( info, TCmd_SendFrame );
7264 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7265
7266 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7267
7268
7269 /******************************/
7270 /* WAIT FOR TRANSMIT COMPLETE */
7271 /******************************/
7272
7273 /* Wait 100ms */
7274 EndTime = jiffies + msecs_to_jiffies(100);
7275
7276 /* While timer not expired wait for transmit complete */
7277
7278 spin_lock_irqsave(&info->irq_spinlock,flags);
7279 status = usc_InReg( info, TCSR );
7280 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7281
7282 while ( !(status & (BIT6 | BIT5 | BIT4 | BIT2 | BIT1)) ) {
7283 if (time_after(jiffies, EndTime)) {
7284 rc = false;
7285 break;
7286 }
7287
7288 spin_lock_irqsave(&info->irq_spinlock,flags);
7289 status = usc_InReg( info, TCSR );
7290 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7291 }
7292 }
7293
7294
7295 if ( rc ){
7296 /* CHECK FOR TRANSMIT ERRORS */
7297 if ( status & (BIT5 | BIT1) )
7298 rc = false;
7299 }
7300
7301 if ( rc ) {
7302 /* WAIT FOR RECEIVE COMPLETE */
7303
7304 /* Wait 100ms */
7305 EndTime = jiffies + msecs_to_jiffies(100);
7306
7307 /* Wait for 16C32 to write receive status to buffer entry. */
7308 status=info->rx_buffer_list[0].status;
7309 while ( status == 0 ) {
7310 if (time_after(jiffies, EndTime)) {
7311 rc = false;
7312 break;
7313 }
7314 status=info->rx_buffer_list[0].status;
7315 }
7316 }
7317
7318
7319 if ( rc ) {
7320 /* CHECK FOR RECEIVE ERRORS */
7321 status = info->rx_buffer_list[0].status;
7322
7323 if ( status & (BIT8 | BIT3 | BIT1) ) {
7324 /* receive error has occurred */
7325 rc = false;
7326 } else {
7327 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7328 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
7329 rc = false;
7330 }
7331 }
7332 }
7333
7334 spin_lock_irqsave(&info->irq_spinlock,flags);
7335 usc_reset( info );
7336 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7337
7338 /* restore current port options */
7339 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7340
7341 return rc;
7342
7343 } /* end of mgsl_dma_test() */
7344
7345 /* mgsl_adapter_test()
7346 *
7347 * Perform the register, IRQ, and DMA tests for the 16C32.
7348 *
7349 * Arguments: info pointer to device instance data
7350 * Return Value: 0 if success, otherwise -ENODEV
7351 */
7352 static int mgsl_adapter_test( struct mgsl_struct *info )
7353 {
7354 if ( debug_level >= DEBUG_LEVEL_INFO )
7355 printk( "%s(%d):Testing device %s\n",
7356 __FILE__,__LINE__,info->device_name );
7357
7358 if ( !mgsl_register_test( info ) ) {
7359 info->init_error = DiagStatus_AddressFailure;
7360 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7361 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7362 return -ENODEV;
7363 }
7364
7365 if ( !mgsl_irq_test( info ) ) {
7366 info->init_error = DiagStatus_IrqFailure;
7367 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7368 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7369 return -ENODEV;
7370 }
7371
7372 if ( !mgsl_dma_test( info ) ) {
7373 info->init_error = DiagStatus_DmaFailure;
7374 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7375 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7376 return -ENODEV;
7377 }
7378
7379 if ( debug_level >= DEBUG_LEVEL_INFO )
7380 printk( "%s(%d):device %s passed diagnostics\n",
7381 __FILE__,__LINE__,info->device_name );
7382
7383 return 0;
7384
7385 } /* end of mgsl_adapter_test() */
7386
7387 /* mgsl_memory_test()
7388 *
7389 * Test the shared memory on a PCI adapter.
7390 *
7391 * Arguments: info pointer to device instance data
7392 * Return Value: true if test passed, otherwise false
7393 */
7394 static bool mgsl_memory_test( struct mgsl_struct *info )
7395 {
7396 static unsigned long BitPatterns[] =
7397 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7398 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
7399 unsigned long i;
7400 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7401 unsigned long * TestAddr;
7402
7403 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
7404 return true;
7405
7406 TestAddr = (unsigned long *)info->memory_base;
7407
7408 /* Test data lines with test pattern at one location. */
7409
7410 for ( i = 0 ; i < Patterncount ; i++ ) {
7411 *TestAddr = BitPatterns[i];
7412 if ( *TestAddr != BitPatterns[i] )
7413 return false;
7414 }
7415
7416 /* Test address lines with incrementing pattern over */
7417 /* entire address range. */
7418
7419 for ( i = 0 ; i < TestLimit ; i++ ) {
7420 *TestAddr = i * 4;
7421 TestAddr++;
7422 }
7423
7424 TestAddr = (unsigned long *)info->memory_base;
7425
7426 for ( i = 0 ; i < TestLimit ; i++ ) {
7427 if ( *TestAddr != i * 4 )
7428 return false;
7429 TestAddr++;
7430 }
7431
7432 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7433
7434 return true;
7435
7436 } /* End Of mgsl_memory_test() */
7437
7438
7439 /* mgsl_load_pci_memory()
7440 *
7441 * Load a large block of data into the PCI shared memory.
7442 * Use this instead of memcpy() or memmove() to move data
7443 * into the PCI shared memory.
7444 *
7445 * Notes:
7446 *
7447 * This function prevents the PCI9050 interface chip from hogging
7448 * the adapter local bus, which can starve the 16C32 by preventing
7449 * 16C32 bus master cycles.
7450 *
7451 * The PCI9050 documentation says that the 9050 will always release
7452 * control of the local bus after completing the current read
7453 * or write operation.
7454 *
7455 * It appears that as long as the PCI9050 write FIFO is full, the
7456 * PCI9050 treats all of the writes as a single burst transaction
7457 * and will not release the bus. This causes DMA latency problems
7458 * at high speeds when copying large data blocks to the shared
7459 * memory.
7460 *
7461 * This function in effect, breaks the a large shared memory write
7462 * into multiple transations by interleaving a shared memory read
7463 * which will flush the write FIFO and 'complete' the write
7464 * transation. This allows any pending DMA request to gain control
7465 * of the local bus in a timely fasion.
7466 *
7467 * Arguments:
7468 *
7469 * TargetPtr pointer to target address in PCI shared memory
7470 * SourcePtr pointer to source buffer for data
7471 * count count in bytes of data to copy
7472 *
7473 * Return Value: None
7474 */
7475 static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7476 unsigned short count )
7477 {
7478 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7479 #define PCI_LOAD_INTERVAL 64
7480
7481 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7482 unsigned short Index;
7483 unsigned long Dummy;
7484
7485 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7486 {
7487 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7488 Dummy = *((volatile unsigned long *)TargetPtr);
7489 TargetPtr += PCI_LOAD_INTERVAL;
7490 SourcePtr += PCI_LOAD_INTERVAL;
7491 }
7492
7493 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7494
7495 } /* End Of mgsl_load_pci_memory() */
7496
7497 static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7498 {
7499 int i;
7500 int linecount;
7501 if (xmit)
7502 printk("%s tx data:\n",info->device_name);
7503 else
7504 printk("%s rx data:\n",info->device_name);
7505
7506 while(count) {
7507 if (count > 16)
7508 linecount = 16;
7509 else
7510 linecount = count;
7511
7512 for(i=0;i<linecount;i++)
7513 printk("%02X ",(unsigned char)data[i]);
7514 for(;i<17;i++)
7515 printk(" ");
7516 for(i=0;i<linecount;i++) {
7517 if (data[i]>=040 && data[i]<=0176)
7518 printk("%c",data[i]);
7519 else
7520 printk(".");
7521 }
7522 printk("\n");
7523
7524 data += linecount;
7525 count -= linecount;
7526 }
7527 } /* end of mgsl_trace_block() */
7528
7529 /* mgsl_tx_timeout()
7530 *
7531 * called when HDLC frame times out
7532 * update stats and do tx completion processing
7533 *
7534 * Arguments: context pointer to device instance data
7535 * Return Value: None
7536 */
7537 static void mgsl_tx_timeout(unsigned long context)
7538 {
7539 struct mgsl_struct *info = (struct mgsl_struct*)context;
7540 unsigned long flags;
7541
7542 if ( debug_level >= DEBUG_LEVEL_INFO )
7543 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7544 __FILE__,__LINE__,info->device_name);
7545 if(info->tx_active &&
7546 (info->params.mode == MGSL_MODE_HDLC ||
7547 info->params.mode == MGSL_MODE_RAW) ) {
7548 info->icount.txtimeout++;
7549 }
7550 spin_lock_irqsave(&info->irq_spinlock,flags);
7551 info->tx_active = false;
7552 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7553
7554 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7555 usc_loopmode_cancel_transmit( info );
7556
7557 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7558
7559 #if SYNCLINK_GENERIC_HDLC
7560 if (info->netcount)
7561 hdlcdev_tx_done(info);
7562 else
7563 #endif
7564 mgsl_bh_transmit(info);
7565
7566 } /* end of mgsl_tx_timeout() */
7567
7568 /* signal that there are no more frames to send, so that
7569 * line is 'released' by echoing RxD to TxD when current
7570 * transmission is complete (or immediately if no tx in progress).
7571 */
7572 static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7573 {
7574 unsigned long flags;
7575
7576 spin_lock_irqsave(&info->irq_spinlock,flags);
7577 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7578 if (info->tx_active)
7579 info->loopmode_send_done_requested = true;
7580 else
7581 usc_loopmode_send_done(info);
7582 }
7583 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7584
7585 return 0;
7586 }
7587
7588 /* release the line by echoing RxD to TxD
7589 * upon completion of a transmit frame
7590 */
7591 static void usc_loopmode_send_done( struct mgsl_struct * info )
7592 {
7593 info->loopmode_send_done_requested = false;
7594 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7595 info->cmr_value &= ~BIT13;
7596 usc_OutReg(info, CMR, info->cmr_value);
7597 }
7598
7599 /* abort a transmit in progress while in HDLC LoopMode
7600 */
7601 static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7602 {
7603 /* reset tx dma channel and purge TxFifo */
7604 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7605 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7606 usc_loopmode_send_done( info );
7607 }
7608
7609 /* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7610 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7611 * we must clear CMR:13 to begin repeating TxData to RxData
7612 */
7613 static void usc_loopmode_insert_request( struct mgsl_struct * info )
7614 {
7615 info->loopmode_insert_requested = true;
7616
7617 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7618 * begin repeating TxData on RxData (complete insertion)
7619 */
7620 usc_OutReg( info, RICR,
7621 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7622
7623 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7624 info->cmr_value |= BIT13;
7625 usc_OutReg(info, CMR, info->cmr_value);
7626 }
7627
7628 /* return 1 if station is inserted into the loop, otherwise 0
7629 */
7630 static int usc_loopmode_active( struct mgsl_struct * info)
7631 {
7632 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7633 }
7634
7635 #if SYNCLINK_GENERIC_HDLC
7636
7637 /**
7638 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7639 * set encoding and frame check sequence (FCS) options
7640 *
7641 * dev pointer to network device structure
7642 * encoding serial encoding setting
7643 * parity FCS setting
7644 *
7645 * returns 0 if success, otherwise error code
7646 */
7647 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7648 unsigned short parity)
7649 {
7650 struct mgsl_struct *info = dev_to_port(dev);
7651 unsigned char new_encoding;
7652 unsigned short new_crctype;
7653
7654 /* return error if TTY interface open */
7655 if (info->port.count)
7656 return -EBUSY;
7657
7658 switch (encoding)
7659 {
7660 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7661 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7662 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7663 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7664 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7665 default: return -EINVAL;
7666 }
7667
7668 switch (parity)
7669 {
7670 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7671 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7672 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7673 default: return -EINVAL;
7674 }
7675
7676 info->params.encoding = new_encoding;
7677 info->params.crc_type = new_crctype;
7678
7679 /* if network interface up, reprogram hardware */
7680 if (info->netcount)
7681 mgsl_program_hw(info);
7682
7683 return 0;
7684 }
7685
7686 /**
7687 * called by generic HDLC layer to send frame
7688 *
7689 * skb socket buffer containing HDLC frame
7690 * dev pointer to network device structure
7691 */
7692 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
7693 struct net_device *dev)
7694 {
7695 struct mgsl_struct *info = dev_to_port(dev);
7696 unsigned long flags;
7697
7698 if (debug_level >= DEBUG_LEVEL_INFO)
7699 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7700
7701 /* stop sending until this frame completes */
7702 netif_stop_queue(dev);
7703
7704 /* copy data to device buffers */
7705 info->xmit_cnt = skb->len;
7706 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7707
7708 /* update network statistics */
7709 dev->stats.tx_packets++;
7710 dev->stats.tx_bytes += skb->len;
7711
7712 /* done with socket buffer, so free it */
7713 dev_kfree_skb(skb);
7714
7715 /* save start time for transmit timeout detection */
7716 dev->trans_start = jiffies;
7717
7718 /* start hardware transmitter if necessary */
7719 spin_lock_irqsave(&info->irq_spinlock,flags);
7720 if (!info->tx_active)
7721 usc_start_transmitter(info);
7722 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7723
7724 return NETDEV_TX_OK;
7725 }
7726
7727 /**
7728 * called by network layer when interface enabled
7729 * claim resources and initialize hardware
7730 *
7731 * dev pointer to network device structure
7732 *
7733 * returns 0 if success, otherwise error code
7734 */
7735 static int hdlcdev_open(struct net_device *dev)
7736 {
7737 struct mgsl_struct *info = dev_to_port(dev);
7738 int rc;
7739 unsigned long flags;
7740
7741 if (debug_level >= DEBUG_LEVEL_INFO)
7742 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7743
7744 /* generic HDLC layer open processing */
7745 rc = hdlc_open(dev);
7746 if (rc)
7747 return rc;
7748
7749 /* arbitrate between network and tty opens */
7750 spin_lock_irqsave(&info->netlock, flags);
7751 if (info->port.count != 0 || info->netcount != 0) {
7752 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7753 spin_unlock_irqrestore(&info->netlock, flags);
7754 return -EBUSY;
7755 }
7756 info->netcount=1;
7757 spin_unlock_irqrestore(&info->netlock, flags);
7758
7759 /* claim resources and init adapter */
7760 if ((rc = startup(info)) != 0) {
7761 spin_lock_irqsave(&info->netlock, flags);
7762 info->netcount=0;
7763 spin_unlock_irqrestore(&info->netlock, flags);
7764 return rc;
7765 }
7766
7767 /* assert RTS and DTR, apply hardware settings */
7768 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
7769 mgsl_program_hw(info);
7770
7771 /* enable network layer transmit */
7772 dev->trans_start = jiffies;
7773 netif_start_queue(dev);
7774
7775 /* inform generic HDLC layer of current DCD status */
7776 spin_lock_irqsave(&info->irq_spinlock, flags);
7777 usc_get_serial_signals(info);
7778 spin_unlock_irqrestore(&info->irq_spinlock, flags);
7779 if (info->serial_signals & SerialSignal_DCD)
7780 netif_carrier_on(dev);
7781 else
7782 netif_carrier_off(dev);
7783 return 0;
7784 }
7785
7786 /**
7787 * called by network layer when interface is disabled
7788 * shutdown hardware and release resources
7789 *
7790 * dev pointer to network device structure
7791 *
7792 * returns 0 if success, otherwise error code
7793 */
7794 static int hdlcdev_close(struct net_device *dev)
7795 {
7796 struct mgsl_struct *info = dev_to_port(dev);
7797 unsigned long flags;
7798
7799 if (debug_level >= DEBUG_LEVEL_INFO)
7800 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7801
7802 netif_stop_queue(dev);
7803
7804 /* shutdown adapter and release resources */
7805 shutdown(info);
7806
7807 hdlc_close(dev);
7808
7809 spin_lock_irqsave(&info->netlock, flags);
7810 info->netcount=0;
7811 spin_unlock_irqrestore(&info->netlock, flags);
7812
7813 return 0;
7814 }
7815
7816 /**
7817 * called by network layer to process IOCTL call to network device
7818 *
7819 * dev pointer to network device structure
7820 * ifr pointer to network interface request structure
7821 * cmd IOCTL command code
7822 *
7823 * returns 0 if success, otherwise error code
7824 */
7825 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7826 {
7827 const size_t size = sizeof(sync_serial_settings);
7828 sync_serial_settings new_line;
7829 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7830 struct mgsl_struct *info = dev_to_port(dev);
7831 unsigned int flags;
7832
7833 if (debug_level >= DEBUG_LEVEL_INFO)
7834 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7835
7836 /* return error if TTY interface open */
7837 if (info->port.count)
7838 return -EBUSY;
7839
7840 if (cmd != SIOCWANDEV)
7841 return hdlc_ioctl(dev, ifr, cmd);
7842
7843 switch(ifr->ifr_settings.type) {
7844 case IF_GET_IFACE: /* return current sync_serial_settings */
7845
7846 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7847 if (ifr->ifr_settings.size < size) {
7848 ifr->ifr_settings.size = size; /* data size wanted */
7849 return -ENOBUFS;
7850 }
7851
7852 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7853 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7854 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7855 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7856
7857 memset(&new_line, 0, sizeof(new_line));
7858 switch (flags){
7859 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7860 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7861 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7862 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7863 default: new_line.clock_type = CLOCK_DEFAULT;
7864 }
7865
7866 new_line.clock_rate = info->params.clock_speed;
7867 new_line.loopback = info->params.loopback ? 1:0;
7868
7869 if (copy_to_user(line, &new_line, size))
7870 return -EFAULT;
7871 return 0;
7872
7873 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7874
7875 if(!capable(CAP_NET_ADMIN))
7876 return -EPERM;
7877 if (copy_from_user(&new_line, line, size))
7878 return -EFAULT;
7879
7880 switch (new_line.clock_type)
7881 {
7882 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7883 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7884 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7885 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7886 case CLOCK_DEFAULT: flags = info->params.flags &
7887 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7888 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7889 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7890 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7891 default: return -EINVAL;
7892 }
7893
7894 if (new_line.loopback != 0 && new_line.loopback != 1)
7895 return -EINVAL;
7896
7897 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7898 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7899 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7900 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7901 info->params.flags |= flags;
7902
7903 info->params.loopback = new_line.loopback;
7904
7905 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7906 info->params.clock_speed = new_line.clock_rate;
7907 else
7908 info->params.clock_speed = 0;
7909
7910 /* if network interface up, reprogram hardware */
7911 if (info->netcount)
7912 mgsl_program_hw(info);
7913 return 0;
7914
7915 default:
7916 return hdlc_ioctl(dev, ifr, cmd);
7917 }
7918 }
7919
7920 /**
7921 * called by network layer when transmit timeout is detected
7922 *
7923 * dev pointer to network device structure
7924 */
7925 static void hdlcdev_tx_timeout(struct net_device *dev)
7926 {
7927 struct mgsl_struct *info = dev_to_port(dev);
7928 unsigned long flags;
7929
7930 if (debug_level >= DEBUG_LEVEL_INFO)
7931 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7932
7933 dev->stats.tx_errors++;
7934 dev->stats.tx_aborted_errors++;
7935
7936 spin_lock_irqsave(&info->irq_spinlock,flags);
7937 usc_stop_transmitter(info);
7938 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7939
7940 netif_wake_queue(dev);
7941 }
7942
7943 /**
7944 * called by device driver when transmit completes
7945 * reenable network layer transmit if stopped
7946 *
7947 * info pointer to device instance information
7948 */
7949 static void hdlcdev_tx_done(struct mgsl_struct *info)
7950 {
7951 if (netif_queue_stopped(info->netdev))
7952 netif_wake_queue(info->netdev);
7953 }
7954
7955 /**
7956 * called by device driver when frame received
7957 * pass frame to network layer
7958 *
7959 * info pointer to device instance information
7960 * buf pointer to buffer contianing frame data
7961 * size count of data bytes in buf
7962 */
7963 static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
7964 {
7965 struct sk_buff *skb = dev_alloc_skb(size);
7966 struct net_device *dev = info->netdev;
7967
7968 if (debug_level >= DEBUG_LEVEL_INFO)
7969 printk("hdlcdev_rx(%s)\n", dev->name);
7970
7971 if (skb == NULL) {
7972 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
7973 dev->name);
7974 dev->stats.rx_dropped++;
7975 return;
7976 }
7977
7978 memcpy(skb_put(skb, size), buf, size);
7979
7980 skb->protocol = hdlc_type_trans(skb, dev);
7981
7982 dev->stats.rx_packets++;
7983 dev->stats.rx_bytes += size;
7984
7985 netif_rx(skb);
7986 }
7987
7988 static const struct net_device_ops hdlcdev_ops = {
7989 .ndo_open = hdlcdev_open,
7990 .ndo_stop = hdlcdev_close,
7991 .ndo_change_mtu = hdlc_change_mtu,
7992 .ndo_start_xmit = hdlc_start_xmit,
7993 .ndo_do_ioctl = hdlcdev_ioctl,
7994 .ndo_tx_timeout = hdlcdev_tx_timeout,
7995 };
7996
7997 /**
7998 * called by device driver when adding device instance
7999 * do generic HDLC initialization
8000 *
8001 * info pointer to device instance information
8002 *
8003 * returns 0 if success, otherwise error code
8004 */
8005 static int hdlcdev_init(struct mgsl_struct *info)
8006 {
8007 int rc;
8008 struct net_device *dev;
8009 hdlc_device *hdlc;
8010
8011 /* allocate and initialize network and HDLC layer objects */
8012
8013 dev = alloc_hdlcdev(info);
8014 if (!dev) {
8015 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8016 return -ENOMEM;
8017 }
8018
8019 /* for network layer reporting purposes only */
8020 dev->base_addr = info->io_base;
8021 dev->irq = info->irq_level;
8022 dev->dma = info->dma_level;
8023
8024 /* network layer callbacks and settings */
8025 dev->netdev_ops = &hdlcdev_ops;
8026 dev->watchdog_timeo = 10 * HZ;
8027 dev->tx_queue_len = 50;
8028
8029 /* generic HDLC layer callbacks and settings */
8030 hdlc = dev_to_hdlc(dev);
8031 hdlc->attach = hdlcdev_attach;
8032 hdlc->xmit = hdlcdev_xmit;
8033
8034 /* register objects with HDLC layer */
8035 rc = register_hdlc_device(dev);
8036 if (rc) {
8037 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8038 free_netdev(dev);
8039 return rc;
8040 }
8041
8042 info->netdev = dev;
8043 return 0;
8044 }
8045
8046 /**
8047 * called by device driver when removing device instance
8048 * do generic HDLC cleanup
8049 *
8050 * info pointer to device instance information
8051 */
8052 static void hdlcdev_exit(struct mgsl_struct *info)
8053 {
8054 unregister_hdlc_device(info->netdev);
8055 free_netdev(info->netdev);
8056 info->netdev = NULL;
8057 }
8058
8059 #endif /* CONFIG_HDLC */
8060
8061
8062 static int synclink_init_one (struct pci_dev *dev,
8063 const struct pci_device_id *ent)
8064 {
8065 struct mgsl_struct *info;
8066
8067 if (pci_enable_device(dev)) {
8068 printk("error enabling pci device %p\n", dev);
8069 return -EIO;
8070 }
8071
8072 info = mgsl_allocate_device();
8073 if (!info) {
8074 printk("can't allocate device instance data.\n");
8075 return -EIO;
8076 }
8077
8078 /* Copy user configuration info to device instance data */
8079
8080 info->io_base = pci_resource_start(dev, 2);
8081 info->irq_level = dev->irq;
8082 info->phys_memory_base = pci_resource_start(dev, 3);
8083
8084 /* Because veremap only works on page boundaries we must map
8085 * a larger area than is actually implemented for the LCR
8086 * memory range. We map a full page starting at the page boundary.
8087 */
8088 info->phys_lcr_base = pci_resource_start(dev, 0);
8089 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8090 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8091
8092 info->bus_type = MGSL_BUS_TYPE_PCI;
8093 info->io_addr_size = 8;
8094 info->irq_flags = IRQF_SHARED;
8095
8096 if (dev->device == 0x0210) {
8097 /* Version 1 PCI9030 based universal PCI adapter */
8098 info->misc_ctrl_value = 0x007c4080;
8099 info->hw_version = 1;
8100 } else {
8101 /* Version 0 PCI9050 based 5V PCI adapter
8102 * A PCI9050 bug prevents reading LCR registers if
8103 * LCR base address bit 7 is set. Maintain shadow
8104 * value so we can write to LCR misc control reg.
8105 */
8106 info->misc_ctrl_value = 0x087e4546;
8107 info->hw_version = 0;
8108 }
8109
8110 mgsl_add_device(info);
8111
8112 return 0;
8113 }
8114
8115 static void synclink_remove_one (struct pci_dev *dev)
8116 {
8117 }
8118
(deprecated) Btrfs devel tree